-
Monolayer Capping Provides Close to Optimal Resistance to Laser Dewetting of Au Films
Authors:
Christopher P. Murray,
Daniyar Mamyraimov,
Mugahid Ali,
Clive Downing,
Ian M. Povey,
David McCloskey,
David D. O'Regan,
John F. Donegan
Abstract:
Next-generation heat-assisted magnetic recording (HAMR) relies on fast, localized heating of the magnetic medium during the write process. Au plasmonic near-field transducers are an attractive solution to this challenge, but increased thermal stability of Au films is required to improve long-term reliability. This work compares the effect of nanoscale Al, AlOx, and Ta capping films on Au thin film…
▽ More
Next-generation heat-assisted magnetic recording (HAMR) relies on fast, localized heating of the magnetic medium during the write process. Au plasmonic near-field transducers are an attractive solution to this challenge, but increased thermal stability of Au films is required to improve long-term reliability. This work compares the effect of nanoscale Al, AlOx, and Ta capping films on Au thin films with Ti or Ta adhesion layers for use in HAMR and other high-temperature plasmonic applications. Thermal stability is investigated using a bespoke laser dewetting system, and SEM and AFM are extensively used to interrogate the resulting dewet areas. The most effective capping layers are found to be 0.5-1 nm of Al or AlOx, which can eliminate dewetting under certain conditions. Even one monolayer of AlOx is shown to be highly effective in reducing dewetting. In the case of thicker capping layers of Ta and AlOx, the Au film can easily dewet underneath, leaving an intact capping layer. It is concluded that thinner capping layers are most effective against dewetting as the Au cannot dewet without breaking them and pulling them apart during the dewetting process. A simple model based on energetics considerations is developed, which explains how thinner capping layers can more effectively protect the metal from pore or fissure creation. The model provides some convenient guidelines for choosing both the substrate and capping layer, for a given metal, to maximize the resistance to laser-induced damage.
△ Less
Submitted 18 December, 2024;
originally announced December 2024.
-
Multiscale Design of Au-Based Alloys for Improved Plasmon Delivery and Nanoheating in Near-Field Transducers
Authors:
Okan K. Orhan,
Frank Daniel Bello,
Nicolás Abadía,
Ortwin Hess,
John F. Donegan,
David D. O'Regan
Abstract:
Plasmonic near-field transducers (NFTs) play a key role in administering nanoscale heating for a number of applications ranging from medical devices to next generation data processing technology. We present a novel multi-scale approach, combining quantum many-body perturbation theory with finite-element modelling, to predict the electric and thermal material parameters of various Au-based, noble m…
▽ More
Plasmonic near-field transducers (NFTs) play a key role in administering nanoscale heating for a number of applications ranging from medical devices to next generation data processing technology. We present a novel multi-scale approach, combining quantum many-body perturbation theory with finite-element modelling, to predict the electric and thermal material parameters of various Au-based, noble metal (M) alloys. Specifically, we focus on modelling their performance within an NFT designed to focus high-intensity, sub-diffracted light for technologies such as nanoscale etching, manipulation, sensing, and heat-assisted magnetic recording (HAMR). Elemental Au is the long-standing general-purpose NFT medium due its excellent plasmonic performance at relevant wavelengths. However, elemental Au is a soft, ductile material that tends to extrude and deform in response to extreme temperature gradients. Therefore, alloying Au with other noble metals such as Ag, Cu, Pd or Pt, has attracted considerable interest for improved mechanical and thermal robustness while reaching threshold plasmonic generation at standard optoelectronics operating wavelengths (e.g., $\approx 830$~nm) and approximate high-power NFT temperatures ($\approx 400$~K). We predict that certain Au-Ag alloys may offer improved thermal stability as whole-NFT media compared to elemental Au, alongside plasmonic figures of merit comparable to that of Au. Simulations of certain solid solution Au-Pd/Pt alloys enable us to predict significantly enhanced thermal conductivity. We predict that alloying with Pd at low concentrations $\sim 10\%$ may preserve the NFT performance of Au, while offering the benefits of improved thermal and mechanical stability.
△ Less
Submitted 26 August, 2024;
originally announced August 2024.
-
arXiv:2204.13030
[pdf]
physics.optics
cond-mat.other
physics.app-ph
physics.class-ph
physics.comp-ph
CMOS compatible multi-band plasmonic TE-pass polarizer
Authors:
Nicolás Abadía,
Md. Ghulam Saber,
Frank Bello,
Alireza Samani,
Eslam El-Fiky,
Yun Wang,
John F. Donegan,
David V. Plant
Abstract:
A CMOS-compatible plasmonic TE-pass polarizer capable of working in the O, E, S, C, L, and U bands is numerically analyzed. The device is based on an integrated hybrid plasmonic waveguide (HPW) with a segmented metal design. The segmented metal will avoid the propagation of the TM mode, confined in the slot of the HPW, while the TE fundamental mode will pass. The TE mode is not affected by the met…
▽ More
A CMOS-compatible plasmonic TE-pass polarizer capable of working in the O, E, S, C, L, and U bands is numerically analyzed. The device is based on an integrated hybrid plasmonic waveguide (HPW) with a segmented metal design. The segmented metal will avoid the propagation of the TM mode, confined in the slot of the HPW, while the TE fundamental mode will pass. The TE mode is not affected by the metal segmentation since it is confined in the core of the HPW. The concept of the segmented metal can be exploited in a plasmonic circuit with HPWs as the connecting waveguides between parts of the circuit and in a silicon photonics circuit with strip or slab waveguides connecting the different parts of the circuit. Using 3D FDTD simulations, it is shown that for a length of 5.5 μm the polarization extinction ratios are better than 20 dB and the insertion losses are less than 1.7 dB over all the optical communication bands.
△ Less
Submitted 15 July, 2022; v1 submitted 27 April, 2022;
originally announced April 2022.
-
arXiv:2204.13026
[pdf]
physics.optics
cond-mat.mtrl-sci
cond-mat.other
physics.app-ph
physics.class-ph
Highly fabrication tolerant InP based polarization beam splitter based on p-i-n structure
Authors:
Nicolás Abadía,
Xiangyang Dai,
Qiaoyin Lu,
Wei-Hua Guo,
David Patel,
David V. Plant,
John F. Donegan
Abstract:
In this work, a novel highly fabrication tolerant polarization beam splitter (PBS) is presented on an InP platform. To achieve the splitting, we combine the Pockels effect and the plasma dispersion effect in a symmetric 1x2 Mach-Zehnder interferometer (MZI). One p-i-n phase shifter of the MZI is driven in forward bias to exploit the plasma dispersion effect and modify the phase of both the TE and…
▽ More
In this work, a novel highly fabrication tolerant polarization beam splitter (PBS) is presented on an InP platform. To achieve the splitting, we combine the Pockels effect and the plasma dispersion effect in a symmetric 1x2 Mach-Zehnder interferometer (MZI). One p-i-n phase shifter of the MZI is driven in forward bias to exploit the plasma dispersion effect and modify the phase of both the TE and TM mode. The other arm of the MZI is driven in reverse bias to exploit the Pockels effect which affects only the TE mode. By adjusting the voltages of the two phase shifters, a different interference condition can be set for the TE and the TM modes thereby splitting them at the output of the MZI. By adjusting the voltages, the very tight fabrication tolerances known for fully passive PBS are eased. The experimental results show that an extinction ratio better than 15 dB and an on-chip loss of 3.5 dB over the full C-band (1530-1565nm) are achieved.
△ Less
Submitted 19 July, 2022; v1 submitted 27 April, 2022;
originally announced April 2022.
-
Raman Characterization of Platinum Diselenide Thin Films
Authors:
Maria O'Brien,
Niall McEvoy,
Carlo Motta,
Jian-Yao Zheng,
Nina C. Berner,
Jani Kotakoski,
Kenan Elibol,
Timothy J. Pennycook,
Jannik C. Meyer,
Chanyoung Yim,
Mohamed Abid,
Toby Hallam,
John F. Donegan,
Stefano Sanvito,
Georg S. Duesberg
Abstract:
Platinum diselenide (PtSe2) is a newly discovered 2D material which is of great interest for applications in electronics and catalysis. PtSe2 films were synthesized by thermally-assisted selenization of predeposited platinum films and scanning transmission electron microscopy revealed the crystal structure of these films to be 1T. Raman scattering of these films was studied as a function of film t…
▽ More
Platinum diselenide (PtSe2) is a newly discovered 2D material which is of great interest for applications in electronics and catalysis. PtSe2 films were synthesized by thermally-assisted selenization of predeposited platinum films and scanning transmission electron microscopy revealed the crystal structure of these films to be 1T. Raman scattering of these films was studied as a function of film thickness, laser wavelength and laser polarization. Eg and A1g Raman active modes were identified using polarization measurements in the Raman setup. These modes were found to display a clear position and intensity dependence with film thickness, for multiple excitation wavelengths, and their peak positions agree with simulated phonon dispersion curves for PtSe2. These results highlight the practicality of using Raman spectroscopy as a prime characterization technique for newly-synthesized 2D materials.
△ Less
Submitted 31 December, 2015;
originally announced December 2015.
