-
Polymer-modulated evaporation flow enables scalable self-assembly of highly aligned nanowires
Authors:
Liyiming Tao,
Zechao Jiang,
Shiyuan Hu,
Lin Du,
Qiuting Zhang,
Jiajia Zhou,
Masao Doi,
Xiaojun Wu,
Xingkun Man,
Ye Xu
Abstract:
Highly aligned nanowire networks are essential for enabling anisotropic optical, electrical, and sensing functionalities in next-generation devices. However, achieving such alignment typically requires complex fabrication methods or high-energy processing. Here, we present a simple and scalable self-assembly strategy that uses a viscosity-enhancing polymer additive to modulate fluid flows during s…
▽ More
Highly aligned nanowire networks are essential for enabling anisotropic optical, electrical, and sensing functionalities in next-generation devices. However, achieving such alignment typically requires complex fabrication methods or high-energy processing. Here, we present a simple and scalable self-assembly strategy that uses a viscosity-enhancing polymer additive to modulate fluid flows during solvent evaporation. The addition of carboxymethylcellulose sodium (CMC-Na) reshapes the evaporation-driven flow field and generates a compressional flow region near the drying edge. Within this region, rotation-inducing velocity gradients progressively align silver nanowires (AgNWs) into highly ordered arrays. This unique mechanism yields uniform AgNW coatings with a high degree of nanowire alignment and tunable areal density across centimeter-scale areas. The resulting films exhibit strong broadband anisotropy, including polarization-dependent transmission in both visible and terahertz (THz) regimes and angle-dependent electrical conductivity. The approach also integrates naturally with dip-coating-based shear alignment, enabling programmable control over alignment direction and spatial patterning. This work establishes a robust, polymer-enabled mechanism for bottom-up nanowire alignment and offers a passive, energy-efficient route for fabricating anisotropic nanostructured coatings.
△ Less
Submitted 29 May, 2025;
originally announced May 2025.
-
Uniform deposition of particles in large scale by drying of binary droplets
Authors:
Zechao Jiang,
Liyiming Tao,
Xiuyuan Yang,
Masao Doi,
Ye Xu,
Xingkun Man
Abstract:
The evaporation of liquid droplets often results in a ring-like deposition pattern of particles, presenting challenges for applications requiring highly uniform patterns. Despite extensive efforts to suppress the coffee ring effect, achieving a uniform particle distribution remains a great challenge due to the complex and non-equilibrium nature of the evaporation process. In this work, we introduc…
▽ More
The evaporation of liquid droplets often results in a ring-like deposition pattern of particles, presenting challenges for applications requiring highly uniform patterns. Despite extensive efforts to suppress the coffee ring effect, achieving a uniform particle distribution remains a great challenge due to the complex and non-equilibrium nature of the evaporation process. In this work, we introduce and demonstrate a one-step drying method for binary droplets (water and 2-methoxyethanol) that produces uniform deposition of nano- and micro-particles. By adjusting the initial water volume fraction, we effectively control the interplay between capillary and Marangoni flows, resulting in deposition patterns that vary from coffee ring to uniform and to volcano-like. Through both theoretical and experimental analyses, we determine the conditions necessary for achieving such high uniformity. This approach requires no special substrate treatment, particle modification, or controlled environments, and works for various particles, including silica and polystyrene. Our method provides a robust solution for fabricating uniform patterns that are crucial for many practical applications, ranging from printing to microelectronics to bio-pharmacy.
△ Less
Submitted 8 April, 2025;
originally announced April 2025.
-
Response of magnetic particle to rotating magnetic field in viscoelastic fluid
Authors:
Han Gao,
Zhiyuan Zhao,
Masao Doi,
Ye Xu
Abstract:
The rotational dynamics of a freely suspended ferromagnetic particle in viscoelastic fluid subjected to a rotating magnetic field is studied by experiments and theory. Our result reveals that when the characteristic relaxation time of the fluid is much smaller than the inverse critical field frequency, the particle's rotation behavior aligns with that in Newtonian fluids. Increasing the relaxation…
▽ More
The rotational dynamics of a freely suspended ferromagnetic particle in viscoelastic fluid subjected to a rotating magnetic field is studied by experiments and theory. Our result reveals that when the characteristic relaxation time of the fluid is much smaller than the inverse critical field frequency, the particle's rotation behavior aligns with that in Newtonian fluids. Increasing the relaxation time enhances the time-averaged rotation frequency of the particle that undergo asynchronous rotation. Moreover, the critical frequency is shown to scale linearly with the magnetic field intensity and inversely with the fluid's zero-shear viscosity. Our work is expected to guide precise manipulation of ferromagnetic particles in biomedical systems where viscoelastic environments dominate.
△ Less
Submitted 3 April, 2025;
originally announced April 2025.
-
Gravity-induced Diffusivity of an Axisymmetric Brownian Particle
Authors:
Zhongqiang Xiong,
Ryohei Seto,
Masao Doi
Abstract:
A rigid axisymmetric particle with hydrodynamic anisotropy exhibits gliding motion in a quiescent Newtonian fluid under gravity. When Brownian motion is significant, the orientation of the particle fluctuates during sedimentation. We perform an analytical calculation for this sedimentation process. Our results show that gravity can significantly enhance the spatial diffusion of the particle. In ad…
▽ More
A rigid axisymmetric particle with hydrodynamic anisotropy exhibits gliding motion in a quiescent Newtonian fluid under gravity. When Brownian motion is significant, the orientation of the particle fluctuates during sedimentation. We perform an analytical calculation for this sedimentation process. Our results show that gravity can significantly enhance the spatial diffusion of the particle. In addition to Brownian diffusion, gravity induces an additional apparent diffusivity. This gravity-induced diffusivity increases quadratically with the sedimentation Péclet number in the high Péclet number regime and is further enhanced by hydrodynamic anisotropy when the particle shape deviates from a sphere at a fixed Péclet number. When the centers of mass and buoyancy deviate from the hydrodynamic center, the particle tends to align with the direction of gravity. This alignment reduces the effective translational resistance along the gravity direction, thereby increasing the sedimentation velocity. At a given Péclet number, the horizontal diffusivity exhibits a peak before converging to the normal diffusion constant as the center deviation becomes larger.
△ Less
Submitted 27 February, 2025;
originally announced February 2025.
-
Phase transition in binary compressed sensing based on $L_{1}$-norm minimization
Authors:
Mikiya Doi,
Masayuki Ohzeki
Abstract:
Compressed sensing is a signal processing scheme that reconstructs high-dimensional sparse signals from a limited number of observations. In recent years, various problems involving signals with a finite number of discrete values have been attracting attention in the field of compressed sensing. In particular, binary compressed sensing, which restricts signal elements to binary values $\{0, 1\}$,…
▽ More
Compressed sensing is a signal processing scheme that reconstructs high-dimensional sparse signals from a limited number of observations. In recent years, various problems involving signals with a finite number of discrete values have been attracting attention in the field of compressed sensing. In particular, binary compressed sensing, which restricts signal elements to binary values $\{0, 1\}$, is the most fundamental and straightforward analysis subject in such problem settings. We evaluate the typical performance of noiseless binary compressed sensing based on $L_{1}$-norm minimization using the replica method, a statistical mechanical approach. We analyze a general setting where the elements of the observation matrix follow a Gaussian distribution, including a non-zero mean. We demonstrate that the biased observation matrix indicates more reconstruction success conditions in binary compressed sensing. Our results are consistent with the outcomes of several prior studies.
△ Less
Submitted 19 August, 2024; v1 submitted 27 May, 2024;
originally announced May 2024.
-
Bending-Rotation coupling in the viscoelasticity of semiflexible polymers -- Rigorous perturbation analysis from the rod limit
Authors:
Zhongqiang Xiong,
Ryohei Seto,
Masao Doi
Abstract:
Brownian motion and viscoelasticity of semiflexible polymers is a subject that has been studied for many years. Still, rigorous analysis has been hindered due to the difficulty in handling the constraint that polymer chains cannot be stretched along the contour. Here, we show a straightforward method to solve the problem. We consider a stiff polymer that has a persistent length $L_p$ much larger t…
▽ More
Brownian motion and viscoelasticity of semiflexible polymers is a subject that has been studied for many years. Still, rigorous analysis has been hindered due to the difficulty in handling the constraint that polymer chains cannot be stretched along the contour. Here, we show a straightforward method to solve the problem. We consider a stiff polymer that has a persistent length $L_p$ much larger than the contour length $L$. We express the polymer configuration using three types of variables: the position vector of the center of mass $R_c$, the unit vector $n$ along the main axis, and the normal coordinates $u_p$ for bending. Solving the Smoluchowski equation for the distribution function of these variables, we calculate the equilibrium time correlation function $ \langle P(t)\cdot P(0) \rangle$ of the end-to-end vector $P$ and the complex modulus $G^*(ω)$ of dilute solution. They include the bending effect to the first order in $θ\equiv L/L_p$ and reduce to the exact results for the rigid rod in the limit of $θ\to 0$. The rotational diffusion coefficient increases slightly by the semiflexibility because the equilibrium length of the semiflexible polymer is smaller than that of the rigid rod with the same contour length. The storage modulus shows the same asymptotic dependence $G'(ω) \sim ω^{3/4}$ predicted by Shankar, Pasquali, and Morse [J. Rheol. 2002, 46, 1111--1154]. The high-frequency viscosity is predicted to be dependent on the thickness of the semiflexible polymers.
△ Less
Submitted 20 May, 2024; v1 submitted 8 March, 2024;
originally announced March 2024.
-
A Unified Model for Non-Fickian Diffusion and Anomalous Swelling of Glassy Polymer Gels
Authors:
Peihan Lyu,
Zhaoyu Ding,
Masao Doi,
Xingkun Man
Abstract:
A sheet of glassy polymers placed in a solvent shows swelling behaviors quite different from that of soft polymers (rubbers and gels). (1) Non-Fickian diffusion (called case II diffusion): As solvent permeates into the sample, a sharp front is created between the swollen part and the glassy part, and it moves toward the center at constant speed. (2) Nonmonotonous swelling: The thickness of the sam…
▽ More
A sheet of glassy polymers placed in a solvent shows swelling behaviors quite different from that of soft polymers (rubbers and gels). (1) Non-Fickian diffusion (called case II diffusion): As solvent permeates into the sample, a sharp front is created between the swollen part and the glassy part, and it moves toward the center at constant speed. (2) Nonmonotonous swelling: The thickness of the sample first increases and then decreases toward the equilibrium value. Here we propose a theory to explain such anomalous behavior by extending the previous theory for swelling of soft gels. We regard the material as a continuum mixture of a glassy polymer network and solvent. We assume that the polymer network is a viscoelastic gel of glassy polymers, and its relaxation time depends strongly on solvent concentration. We show that this theory explains the above two characteristics of glassy polymers in a simple and unified framework. The theory predicts how the permeation speed of the solvent and the characteristic times of the swelling process depend on material parameters and experimental conditions, which can be checked experimentally.
△ Less
Submitted 23 April, 2024; v1 submitted 6 February, 2024;
originally announced February 2024.
-
Effect of viscoelastic fluid on the lift force in lubricated contacts
Authors:
Shiyuan Hu,
Fanlong Meng,
Masao Doi
Abstract:
We consider a cylinder immersed in viscous fluid moving near a flat substrate covered by an incompressible viscoelastic fluid layer, and study the effect of the fluid viscoelasticity on the lift force exerted on the cylinder. The lift force is zero when the viscoelastic layer is not deformed, but becomes non-zero when it is deformed. We calculate the lift force by considering both the tangential s…
▽ More
We consider a cylinder immersed in viscous fluid moving near a flat substrate covered by an incompressible viscoelastic fluid layer, and study the effect of the fluid viscoelasticity on the lift force exerted on the cylinder. The lift force is zero when the viscoelastic layer is not deformed, but becomes non-zero when it is deformed. We calculate the lift force by considering both the tangential stress and the normal stress applied at the surface of the viscoelastic layer. Our analysis indicates that as the layer changes from the elastic limit to the viscous limit, the lift force decreases with the decrease of the Deborah number (De). For small De, the effect of the layer elasticity is taken over by the surface tension and the lift force can become negative. We also show that the tangential stress and the interface slip velocity (the surface velocity relative to the substrate), which have been ignored in the previous analysis, give important contributions to the lift force. Especially for thin elastic layer, they give dominant contributions to the lift force.
△ Less
Submitted 20 August, 2023;
originally announced August 2023.
-
Density-Induced Hadron-Quark Crossover via the Formation of Cooper Triples
Authors:
Hiroyuki Tajima,
Shoichiro Tsutsui,
Takahiro M. Doi,
Kei Iida
Abstract:
We discuss the hadron--quark crossover accompanied by the formation of Cooper triples (three-body counterpart of Cooper pairs) by analogy with the Bose--Einstein condensate to Bardeen--Cooper--Schrieffer crossover in two-component fermionic systems. Such a crossover is different from a phase transition, which often involves symmetry breaking. We calculate the in-medium three-body energy from the t…
▽ More
We discuss the hadron--quark crossover accompanied by the formation of Cooper triples (three-body counterpart of Cooper pairs) by analogy with the Bose--Einstein condensate to Bardeen--Cooper--Schrieffer crossover in two-component fermionic systems. Such a crossover is different from a phase transition, which often involves symmetry breaking. We calculate the in-medium three-body energy from the three-body $T$-matrix with a phenomenological three-body force characterizing a bound hadronic state in vacuum. With increasing density, the hadronic bound-state pole smoothly undergoes a crossover toward the Cooper triple phase where the in-medium three-body clusters coexist with the quark Fermi sea. The relation to the quarkyonic matter model can also be found in a natural manner.
△ Less
Submitted 1 February, 2023; v1 submitted 25 November, 2022;
originally announced November 2022.
-
Universality in the dynamics of vesicle translocation through a hole
Authors:
Bin Zheng,
Fangfu Ye,
Shigeyuki Komura,
Masao Doi
Abstract:
We analyze the translocation process of a spherical vesicle, made of membrane and incompressible fluid, through a hole smaller than the vesicle size, driven by pressure difference $ΔP$. We show that such a vesicle shows certain universal characteristics which is independent of the details of the membrane elasticity; (i) there is a critical pressure $ΔP_{\rm c}$ below which no translocation occurs,…
▽ More
We analyze the translocation process of a spherical vesicle, made of membrane and incompressible fluid, through a hole smaller than the vesicle size, driven by pressure difference $ΔP$. We show that such a vesicle shows certain universal characteristics which is independent of the details of the membrane elasticity; (i) there is a critical pressure $ΔP_{\rm c}$ below which no translocation occurs, (ii) $ΔP_{\rm c}$ decreases to zero as the vesicle radius $R_0$ approaches the hole radius $a$, satisfying the scaling relation $ΔP_{\rm c} \sim (R_0 - a)^{3/2}$, and (iii) the translocation time $τ$ diverges as $ΔP$ decreases to $ΔP_{\rm c}$, satisfying the scaling relation $τ\sim (ΔP -ΔP_{\rm c})^{-1/2}$.
△ Less
Submitted 17 October, 2022;
originally announced October 2022.
-
Derivation of Two-fluid Model Based on Onsager Principle
Authors:
Jiajia Zhou,
Masao Doi
Abstract:
Using Onsager variational principle, we study the dynamic coupling between the stress and the composition in polymer solution. In the original derivation of the two-fluid model [Doi and Onuki, J. Phys. II France {\bf 2}, 1631 (1992)], the polymer stress was introduced \emph{a priopri}, therefore a constitutive equation is required to close the equations. Based on our previous study of viscoelastic…
▽ More
Using Onsager variational principle, we study the dynamic coupling between the stress and the composition in polymer solution. In the original derivation of the two-fluid model [Doi and Onuki, J. Phys. II France {\bf 2}, 1631 (1992)], the polymer stress was introduced \emph{a priopri}, therefore a constitutive equation is required to close the equations. Based on our previous study of viscoelastic fluids with homogeneous composition [Phys. Rev. Fluids {\bf 3}, 084004 (2018)], we start with a dumbbell model for the polymer, and derive all dynamic equations using the Onsager variational principle.
△ Less
Submitted 16 May, 2022;
originally announced May 2022.
-
Capillary rising in a tube with corners
Authors:
Chen Zhao,
Jiajia Zhou,
Masao Doi
Abstract:
We study the dynamics of a fluid rising in a capillary tube with corners. In the cornered tube, unlike the circular tube, fluid rises with two parts, the bulk part where the entire cross-section is occupied by the fluid, and the finger part where the cross-section is only partially filled. Using Onsager principle, we derive coupled time-evolution equations for the two parts. We show that (a) at th…
▽ More
We study the dynamics of a fluid rising in a capillary tube with corners. In the cornered tube, unlike the circular tube, fluid rises with two parts, the bulk part where the entire cross-section is occupied by the fluid, and the finger part where the cross-section is only partially filled. Using Onsager principle, we derive coupled time-evolution equations for the two parts. We show that (a) at the early stage of rising, the dynamics is dominated by the bulk part and the fluid height $h_0(t)$ shows the same behavior as that in the circular tube, and (b) at the late stage, the bulk part stops rising, but the finger part keeps rising following the scaling law of $h_1(t) \sim t^{1/3}$. We also show that due to the coupling between the two parts, the equilibrium bulk height is smaller than the Jurin's height which ignores the effect of the finger part.
△ Less
Submitted 12 April, 2022;
originally announced April 2022.
-
Wetting dynamics in an angular channel
Authors:
Chen Zhao,
Tian Yu,
Jiajia Zhou,
Masao Doi
Abstract:
We analyze the dynamics of liquid filling in a thin, slightly inflated rectangular channel driven by capillary forces. We show that although the amount of liquid $m$ in the channel increases in time following the classical Lucas-Washburn law, $m \propto t^{1/2}$, the prefactor is very sensitive to the deformation of the channel because the filling takes place by the growth of two parts, the bulk p…
▽ More
We analyze the dynamics of liquid filling in a thin, slightly inflated rectangular channel driven by capillary forces. We show that although the amount of liquid $m$ in the channel increases in time following the classical Lucas-Washburn law, $m \propto t^{1/2}$, the prefactor is very sensitive to the deformation of the channel because the filling takes place by the growth of two parts, the bulk part (where the cross-section is completely filled by the liquid), and the finger part (where the cross-section is partially filled). We calculate the time dependence of $m$ accounting for the coupling between the two parts and show that the prefactor for the filling can be reduced significantly by a slight deformation of the rectangular channel, e.g., the prefactor is reduced 50% for a strain of 0.1%. This offers an explanation for the large deviation in the value of the prefactor reported previously.
△ Less
Submitted 9 September, 2021;
originally announced September 2021.
-
Three-body crossover from a Cooper triple to bound trimer state in three-component Fermi gases near a triatomic resonance
Authors:
Hiroyuki Tajima,
Shoichiro Tsutsui,
Takahiro M. Doi,
Kei Iida
Abstract:
We theoretically investigate ground-state properties of a three-component Fermi gas with pairwise contact interactions between different components near a triatomic resonance where bound trimers are about to appear. Using variational equations for in-medium two- and three-body cluster states in three dimensions, we elucidate the competition of pair and triple formations due to the Fermi surface ef…
▽ More
We theoretically investigate ground-state properties of a three-component Fermi gas with pairwise contact interactions between different components near a triatomic resonance where bound trimers are about to appear. Using variational equations for in-medium two- and three-body cluster states in three dimensions, we elucidate the competition of pair and triple formations due to the Fermi surface effects. We present the ground-state phase diagram that exhibits transition from a Cooper pair to Cooper triple state and crossover from a Cooper triple to tightly bound trimer state at negative scattering lengths. This three-body crossover is analogous to the Bardeen-Cooper-Schrieffer to Bose-Einstein condensation crossover observed in a two-component Fermi gas. We predict that the threshold scattering length $a_{-}$ for three-body states can be shifted towards the weak-coupling side due to the emergence of Cooper triples.
△ Less
Submitted 28 July, 2021;
originally announced July 2021.
-
Contact Angle of an Evaporating Droplet of Binary Solution on a Super Wetting Surface
Authors:
Mengmeng Wu,
Masao Doi,
Xingkun Man
Abstract:
We study the dynamics of contact angle of a droplet of binary solution evaporating on a super wetting surface. Recent experiments show that although equilibrium contact angle of such droplet is zero, the contract angle can show complex time dependence before reaching the equilibrium value. We analyse such phenomena by extending our previous theory for the dynamics of an evaporating single componen…
▽ More
We study the dynamics of contact angle of a droplet of binary solution evaporating on a super wetting surface. Recent experiments show that although equilibrium contact angle of such droplet is zero, the contract angle can show complex time dependence before reaching the equilibrium value. We analyse such phenomena by extending our previous theory for the dynamics of an evaporating single component droplet to double component droplet. We show that the time dependence of the contact angle can be quite complex. Typically, it first decreases slightly, and then increases and finally decreases again. Under certain conditions, we find that the contact angle remains constant over a certain period of time during evaporation. We study how the plateau or peak contact angle depends on the initial composition and the humidity. The theory explains experimental results reported previously.
△ Less
Submitted 24 July, 2021;
originally announced July 2021.
-
Unitary $p$-wave Fermi gas in one dimension
Authors:
Hiroyuki Tajima,
Shoichiro Tsutsui,
Takahiro M. Doi,
Kei Iida
Abstract:
We elucidate universal many-body properties of a one-dimensional, two-component ultracold Fermi gas near the $p$-wave Feshbach resonance. The low-energy scattering in this system can be characterized by two parameters, that is, $p$-wave scattering length and effective range. At the unitarity limit where the $p$-wave scattering length diverges and the effective range is reduced to zero without conf…
▽ More
We elucidate universal many-body properties of a one-dimensional, two-component ultracold Fermi gas near the $p$-wave Feshbach resonance. The low-energy scattering in this system can be characterized by two parameters, that is, $p$-wave scattering length and effective range. At the unitarity limit where the $p$-wave scattering length diverges and the effective range is reduced to zero without conflicting with the causality bound, the system obeys universal thermodynamics as observed in a unitary Fermi gas with contact $s$-wave interaction in three dimensions. It is in contrast to a Fermi gas with the $p$-wave resonance in three dimensions in which the effective range is inevitably finite. We present the universal equation of state in this unitary $p$-wave Fermi gas within the many-body $T$-matrix approach as well as the virial expansion method. Moreover, we examine the single-particle spectral function in the high-density regime where the virial expansion is no longer valid. On the basis of the Hartree-like self-energy shift at the divergent scattering length, we conjecture that the equivalence of the Bertsch parameter across spatial dimensions holds even for a one-dimensional unitary $p$-wave Fermi gas.
△ Less
Submitted 24 June, 2021;
originally announced June 2021.
-
Complex Langevin study for polarons in an attractively interacting one-dimensional two-component Fermi gas
Authors:
Takahiro M. Doi,
Hiroyuki Tajima,
Shoichiro Tsutsui
Abstract:
We investigate a polaronic excitation in a one-dimensional spin-1/2 Fermi gas with contact attractive interactions, using the complex Langevin method, which is a promising approach to evade a possible sign problem in quantum Monte Carlo simulations. We found that the complex Langevin method works correctly in a wide range of temperature, interaction strength, and population imbalance. The Fermi po…
▽ More
We investigate a polaronic excitation in a one-dimensional spin-1/2 Fermi gas with contact attractive interactions, using the complex Langevin method, which is a promising approach to evade a possible sign problem in quantum Monte Carlo simulations. We found that the complex Langevin method works correctly in a wide range of temperature, interaction strength, and population imbalance. The Fermi polaron energy extracted from the two-point imaginary Green's function is not sensitive to the temperature and the impurity concentration in the parameter region we considered. Our results show a good agreement with the solution of the thermodynamic Bethe ansatz at zero temperature.
△ Less
Submitted 23 May, 2021;
originally announced May 2021.
-
Swelling Dynamics of a Disk-Shaped Gel
Authors:
Xingkun Man,
Masao Doi
Abstract:
When a gel absorbs solvent from surrounding, stress field is created in the gel, and this causes complex dynamics of the swelling behavior. Here we study this effect for disk-shaped gel by rigorously solving the diffusio-mechanical coupling equation. We show that (a) while the macroscopic thickness and the radius of the gel increases monotonically in time, the gel is compressed near the mid-plane,…
▽ More
When a gel absorbs solvent from surrounding, stress field is created in the gel, and this causes complex dynamics of the swelling behavior. Here we study this effect for disk-shaped gel by rigorously solving the diffusio-mechanical coupling equation. We show that (a) while the macroscopic thickness and the radius of the gel increases monotonically in time, the gel is compressed near the mid-plane, and that (b) while the swelling time depends on the shear modulus $G$ of the gel, its dependence is weak, and the time is mainly determined by the friction constant of the gel network and the osmotic bulk modulus of the gel. We also show that these characteristic features are reproduced accurately by a simple variational calculation for the gel deformation. An analytical expression is given for the swelling time.
△ Less
Submitted 14 May, 2021;
originally announced May 2021.
-
Elastic Response of Wire Frame Glasses. II. Three Dimensional Systems
Authors:
David A. King,
Masao Doi,
Erika Eiser
Abstract:
We study the elastic response of rigid, wire frame particles in concentrated, glassy suspensions to a step strain by applying the simple, geometric methods developed in part I. The wire frame particles are comprised of thin, rigid rods of length $L$ and their number density, $ρ$, is such that $ρL^3 \gg 1$. We specifically compare rigid rods to L-shapes made of two equal length rods joined at right…
▽ More
We study the elastic response of rigid, wire frame particles in concentrated, glassy suspensions to a step strain by applying the simple, geometric methods developed in part I. The wire frame particles are comprised of thin, rigid rods of length $L$ and their number density, $ρ$, is such that $ρL^3 \gg 1$. We specifically compare rigid rods to L-shapes made of two equal length rods joined at right angles. The behaviour of wire frames is found to be strikingly different from that of rods. The linear elasticity scales like $ρ^3 L^6$ for L-shaped particles, whereas it scales proportional to $ρ$ for rods and the non-linear response shows a transition from shear hardening to shear softening at a critical density $ρ_c \sim \sqrt{K / k_B T L^6}$, where $K$ is the bending modulus of the particles. For realistic particles made of double stranded DNA, this transition occurs at densities of about $ρL^3 \sim 10$. The reason for these differences is that wire frames can be forced to bend by the entanglements with their surroundings, whereas rods always remain straight. This is found to be very important even for small strains, with most particles being bent above a critical strain $γ_c \sim (ρL^3)^{-1}$.
△ Less
Submitted 4 February, 2021;
originally announced February 2021.
-
Elastic Response of Wire Frame Glasses. I. Two Dimensional Model
Authors:
David A. King,
Masao Doi,
Erika Eiser
Abstract:
We study the elastic response of concentrated suspensions of rigid wire frame particles to a step strain. These particles are constructed from infinitely thin, rigid rods of length $L$. We specifically compare straight rod-like particles to bent and branched wire frames. In dense suspensions the wire frames are frozen in a disordered state by the topological entanglements between their arms. We pr…
▽ More
We study the elastic response of concentrated suspensions of rigid wire frame particles to a step strain. These particles are constructed from infinitely thin, rigid rods of length $L$. We specifically compare straight rod-like particles to bent and branched wire frames. In dense suspensions the wire frames are frozen in a disordered state by the topological entanglements between their arms. We present a simple, geometric method to find the scaling of the elastic stress with concentration in these glassy systems. We apply this method to a simple 2D model system where a test particle is placed on a plane and constrained by a random distribution of points with number density $ν$. Two striking differences between wire frame and rod suspensions are found: 1) The linear elasticity per particle for wire frames is very large, scaling like $ν^2 L^4$, whereas for rods it much smaller and independent of concentration. 2) Rods always shear thin but wire frames shear harden for densities less than $\sim \sqrt{K/k_B T L^4}$, where $K$ is the bending modulus of the particles. The deformation of wire frames is found to be important even for small strains, with the proportion of deformed particles at a particular strain, $γ$, being given by $(νL^2)^2 γ^2$. Our results agree well with a simple simulation of the 2D system.
△ Less
Submitted 4 February, 2021;
originally announced February 2021.
-
Enhanced electro-actuation in dielectric elastomers: the non-linear effect of free ions
Authors:
Bin Zheng,
Xingkun Man,
David Andelman,
Masao Doi
Abstract:
Plasticized poly(vinyl chloride) (PVC) is a jelly-like soft dielectric material that attracted substantial interest recently as a new type of electro-active polymers. Under electric fields of several hundred Volt/mm, PVC gels undergo large deformations. These gels can be used as artificial muscles and other soft robotic devices, with striking deformation behavior that is quite different from conve…
▽ More
Plasticized poly(vinyl chloride) (PVC) is a jelly-like soft dielectric material that attracted substantial interest recently as a new type of electro-active polymers. Under electric fields of several hundred Volt/mm, PVC gels undergo large deformations. These gels can be used as artificial muscles and other soft robotic devices, with striking deformation behavior that is quite different from conventional dielectric elastomers. Here, we present a simple model for the electro-activity of PVC gels, and show a non-linear effect of free ions on its dielectric behaviors. It is found that their particular deformation behavior is due to an electro-wetting effect and to a change in their interfacial tension. In addition, we derive analytical expressions for the surface tension as well as for the apparent dielectric constant of the gel. The theory indicates that the size of the mobile free ions has a crucial role in determining the electro-induced deformation, opening up the way to novel and innovative designs of electro-active gel actuators.
△ Less
Submitted 15 May, 2022; v1 submitted 26 January, 2021;
originally announced January 2021.
-
Cooper Triples in Attractive Three-Component Fermions: Implication for Hadron-Quark Crossover
Authors:
Hiroyuki Tajima,
Shoichiro Tsutsui,
Takahiro M. Doi,
Kei Iida
Abstract:
We investigate many-body properties of equally populated three-component fermions with attractive three-body contact interaction in one dimension. A diagrammatic approach suggests the possible occurrence of Cooper triples at low temperature, which are three-body counterparts of Cooper pairs with a two-body attraction. We develop a minimal framework that bridges the crossover from tightly-bound tri…
▽ More
We investigate many-body properties of equally populated three-component fermions with attractive three-body contact interaction in one dimension. A diagrammatic approach suggests the possible occurrence of Cooper triples at low temperature, which are three-body counterparts of Cooper pairs with a two-body attraction. We develop a minimal framework that bridges the crossover from tightly-bound trimers to Cooper triples with increasing chemical potential and show how the formation of Cooper triples occurs in the grand-canonical phase diagram. Moreover, we argue that this non-trivial crossover is similar to the hadron-quark crossover proposed in dense matter. A coexistence of medium-induced triples and the underlying Fermi sea at positive chemical potential is analogous to quarkyonic matter consisting of baryonic excitations and the underlying quark Fermi sea. The comparison with the existing quantum Monte Carlo results implies that the emergence of these kinds of three-body states can be a microscopic origin of the peak of the sound velocity along the crossover.
△ Less
Submitted 8 October, 2021; v1 submitted 7 December, 2020;
originally announced December 2020.
-
Wetting equilibrium in a rectangular channel
Authors:
Tian Yu,
Qicheng Sun,
Chen Zhao,
Jiajia Zhou,
Masao Doi
Abstract:
When a capillary channel with corners is wetted by a fluid, there are regions where the fluid fills the whole cross-section and regions where only the corners are filled by the fluid. The fluid fraction of the partially-filled region, $s^*$, is an important quantity related to the capillary pressure. We calculate the value of $s^*$ for channels with a cross-section slightly deviated from a rectang…
▽ More
When a capillary channel with corners is wetted by a fluid, there are regions where the fluid fills the whole cross-section and regions where only the corners are filled by the fluid. The fluid fraction of the partially-filled region, $s^*$, is an important quantity related to the capillary pressure. We calculate the value of $s^*$ for channels with a cross-section slightly deviated from a rectangle: the height is larger in the center than those on the two short sides. We find that a small change in the cross-section geometry leads to a huge change of $s^*$. This result is consistent with experimental observations.
△ Less
Submitted 3 December, 2020;
originally announced December 2020.
-
Universality of capillary rising in corners
Authors:
Jiajia Zhou,
Masao Doi
Abstract:
We study the dynamics of capillary rising in corners. Using Onsager principle, we derive a partial differential equation that describes the time evolution of meniscus profile. We obtain both numerical solutions and self-similar solutions to this partial differential equation. Our results show that the advance of the meniscus front follows a time-scaling of $t^{1/3}$, in agreement with the experime…
▽ More
We study the dynamics of capillary rising in corners. Using Onsager principle, we derive a partial differential equation that describes the time evolution of meniscus profile. We obtain both numerical solutions and self-similar solutions to this partial differential equation. Our results show that the advance of the meniscus front follows a time-scaling of $t^{1/3}$, in agreement with the experimental results and theoretical conjecture of Ponomarenko et al.
△ Less
Submitted 24 June, 2020;
originally announced June 2020.
-
Drying Pathways of an Evaporating Soft Matter Droplet
Authors:
Guangle Du,
Fangfu Ye,
Masao Doi,
Fanlong Meng
Abstract:
Micro-droplets of soft matter solutions have different morphologies upon drying, and can finally become wrinkled, buckled or cavitated particles. We investigate the morphology evolution of a drying soft matter droplet in this work: at the early stage of drying, wrinkling or cavitation instability can occur in the droplet, depending on the comparison between the critical wrinkling and cavitation pr…
▽ More
Micro-droplets of soft matter solutions have different morphologies upon drying, and can finally become wrinkled, buckled or cavitated particles. We investigate the morphology evolution of a drying soft matter droplet in this work: at the early stage of drying, wrinkling or cavitation instability can occur in the droplet, depending on the comparison between the critical wrinkling and cavitation pressure; at a later stage of drying, no wrinkle will appear if cavitation happens first, while there can still be cavitation if wrinkling happens first. A three-dimensional phase diagram in the space of elastic length, gel layer thickness and weight loss is provided for illustrating these drying pathways of a soft matter droplet, which can guide future fabrications of micro-particles with desired morphologies.
△ Less
Submitted 18 June, 2020;
originally announced June 2020.
-
Low-Dimensional Fluctuations and Pseudogap in Gaudin-Yang Fermi Gases
Authors:
Hiroyuki Tajima,
Shoichiro Tsutsui,
Takahiro M. Doi
Abstract:
Pseudogap is a ubiquitous phenomenon in strongly correlated systems such as high-$T_{\rm c}$ superconductors, ultracold atoms and nuclear physics. While pairing fluctuations inducing the pseudogap are known to be enhanced in low-dimensional systems, such effects have not been explored well in one of the most fundamental 1D models, that is, Gaudin-Yang model. In this work, we show that the pseudoga…
▽ More
Pseudogap is a ubiquitous phenomenon in strongly correlated systems such as high-$T_{\rm c}$ superconductors, ultracold atoms and nuclear physics. While pairing fluctuations inducing the pseudogap are known to be enhanced in low-dimensional systems, such effects have not been explored well in one of the most fundamental 1D models, that is, Gaudin-Yang model. In this work, we show that the pseudogap effect can be visible in the single-particle excitation in this system using a diagrammatic approach. Fermionic single-particle spectra exhibit a unique crossover from the double-particle dispersion to pseudogap state with increasing the attractive interaction and the number density at finite temperature. Surprisingly, our results of thermodynamic quantities in unpolarized and polarized gases show an excellent agreement with the recent quantum Monte Carlo and complex Langevin results, even in the region where the pseudogap appears.
△ Less
Submitted 25 May, 2020;
originally announced May 2020.
-
Dynamics of a viscoelastic liquid filament connected to two mobile droplets
Authors:
Jiajia Zhou,
Masao Doi
Abstract:
A filament of liquid is usually unstable and breaks up into small droplets, while a filament of polymer solution is known to be quite stable against such instability, and they form a stable configuration of filament connecting two spherical droplets. If the droplets are fixed in space, the liquid flows from the filament region to the droplet region to reduce the surface energy and the filament get…
▽ More
A filament of liquid is usually unstable and breaks up into small droplets, while a filament of polymer solution is known to be quite stable against such instability, and they form a stable configuration of filament connecting two spherical droplets. If the droplets are fixed in space, the liquid flows from the filament region to the droplet region to reduce the surface energy and the filament gets thinner. If the whole liquid is placed in another viscous fluid, the droplets approach each other, and the filament can get thicker. Here we study the dynamics of such system. We derive time evolution equations for the radius and the length of the filament taking into account the fluid flux from filament to droplets and the motion of the droplets. We will show that (a) if the centers of the droplets are fixed, the filament thins following the classical prediction of Entov and Hinch, and that (b) if the droplets are mobile (subject to the Stokes drag in the viscous medium), the thinning of the filament is suppressed, and under certain conditions, the filament thickens. This theory explains the phenomena observed by Yang and Xu [Phys. Fluids 20, 043101 (2008)] in four-roller mill device.
△ Less
Submitted 17 March, 2020;
originally announced March 2020.
-
Particle shapes leading to Newtonian dilute suspensions
Authors:
David A. King,
Masao Doi,
Erika Eiser
Abstract:
It is well known that suspensions of particles in a viscous fluid can affect the rheology significantly, producing a pronounced non-Newtonian response even in dilute suspension. However, it is unclear a priori which particle shapes lead to this behaviour. We present two simple symmetry conditions on the shape which are sufficient for a dilute suspension to be Newtonian for all strain sizes and one…
▽ More
It is well known that suspensions of particles in a viscous fluid can affect the rheology significantly, producing a pronounced non-Newtonian response even in dilute suspension. However, it is unclear a priori which particle shapes lead to this behaviour. We present two simple symmetry conditions on the shape which are sufficient for a dilute suspension to be Newtonian for all strain sizes and one sufficient for Newtonian behavior for small strains. We also construct a class of shapes out of thin, rigid rods not found by the symmetry argument which share this property for small strains.
△ Less
Submitted 13 December, 2019;
originally announced December 2019.
-
Application of Onsager Machlup integral in solving dynamic equations in non-equilibrium systems
Authors:
Masao Doi,
Jiajia Zhou,
Yana Di,
Xianmin Xu
Abstract:
In 1931, Onsager proposed a variational principle which has become the base of many kinetic equations for non-equilibrium systems. We have been showing that this principle is useful in obtaining approximate solutions for the kinetic equations, but our previous method has a weakness that it can be justified, strictly speaking, only for small incremental time. Here we propose an improved method whic…
▽ More
In 1931, Onsager proposed a variational principle which has become the base of many kinetic equations for non-equilibrium systems. We have been showing that this principle is useful in obtaining approximate solutions for the kinetic equations, but our previous method has a weakness that it can be justified, strictly speaking, only for small incremental time. Here we propose an improved method which does not have this drawback. The new method utilizes the integral proposed by Onsager and Machlup in 1953, and can tell us which of the approximate solutions is the best solution without knowing the exact solution. The new method has an advantage that it allows us to determine the steady state in non-equilibrium system by a variational calculus. We demonstrate this using three examples, (a) simple diffusion problem, (b) capillary problem in a tube with corners, and (c) free boundary problem in liquid coating, for which the kinetic equations are written in second or fourth order partial differential equations.
△ Less
Submitted 16 May, 2019;
originally announced May 2019.
-
Dynamics of Taylor Rising
Authors:
Tian Yu,
Ying Jiang,
Jiajia Zhou,
Masao Doi
Abstract:
We study the dynamics of liquid climbing in a narrow and tilting corner, inspired by recent work on liquid transportation on the peristome surface of Nepenthes alata. Considering the balance of gravity, interfacial tension and viscous force, we derive a partial differential equation for the meniscus profile, and numerically study the behavior of the solution for various tilting angle $β$. We show…
▽ More
We study the dynamics of liquid climbing in a narrow and tilting corner, inspired by recent work on liquid transportation on the peristome surface of Nepenthes alata. Considering the balance of gravity, interfacial tension and viscous force, we derive a partial differential equation for the meniscus profile, and numerically study the behavior of the solution for various tilting angle $β$. We show that the liquid height $h(t)$ at time $t$ satisfy the same scaling law found for vertical corner, i.e., $h(t) \propto t^{1/3}$ for large $t$, but the coefficient depends on the tilting angle $β$. The coefficient can be calculated approximately by Onsager principle, and the result agrees well with that obtained by numerical calculation. Our model can be applied for a weakly curved corner and may provide guidance to the design of biomimetic surfaces for liquid transportation.
△ Less
Submitted 27 March, 2019;
originally announced March 2019.
-
Defect removal by solvent vapor annealing in thin films of lamellar diblock copolymers
Authors:
Xinpeng Xu,
Xingkun Man,
Masao Doi,
Zhong-can Ou-Yang,
David Andelman
Abstract:
Solvent vapor annealing (SVA) is known to be a simple, low-cost and highly efficient technique to produce defect-free diblock copolymer (BCP) thin films. Not only can the solvent weaken the BCP segmental interactions, but it can vary the characteristic spacing of the BCP microstructures. We carry out systematic theoretical studies on the effect of adding solvent into lamellar BCP thin films on the…
▽ More
Solvent vapor annealing (SVA) is known to be a simple, low-cost and highly efficient technique to produce defect-free diblock copolymer (BCP) thin films. Not only can the solvent weaken the BCP segmental interactions, but it can vary the characteristic spacing of the BCP microstructures. We carry out systematic theoretical studies on the effect of adding solvent into lamellar BCP thin films on the defect removal close to the BCP order-disorder transition. We find that the increase of the lamellar spacing, as is induced by addition of solvent, facilitates more efficient removal of defects. The stability of a particular defect in a lamellar BCP thin film is given in terms of two key controllable parameters: the amount of BCP swelling and solvent evaporation rate. Our results highlight the SVA mechanism for obtaining defect-free BCP thin films, as is highly desired in nanolithography and other industrial applications.
△ Less
Submitted 4 October, 2019; v1 submitted 13 February, 2019;
originally announced February 2019.
-
Directional freezing of binary colloidal suspensions: A model for size fractionation of graphene oxide
Authors:
Xin Xu,
Luofu Liu,
Hongya Geng,
Jianjun Wang,
Jiajia Zhou,
Ying Jiang,
Masao Doi
Abstract:
The performance of graphene oxide(GO)-based materials strongly depends on the lateral size and size distribution of GO nanosheets. Various methods are employed to prepare GO nanosheets with a narrow size distribution. One of the promising method was proposed recently by directionally freezing of a GO aqueous dispersion at a controlled growth rate of the freezing front. We develop a theoretic model…
▽ More
The performance of graphene oxide(GO)-based materials strongly depends on the lateral size and size distribution of GO nanosheets. Various methods are employed to prepare GO nanosheets with a narrow size distribution. One of the promising method was proposed recently by directionally freezing of a GO aqueous dispersion at a controlled growth rate of the freezing front. We develop a theoretic model of binary colloids suspension, incorporating both the moving freezing boundary and the preferential adsorption of colloidal particles to the ice phase. We numerically solve the coupled diffusion equations and present state diagrams of size fractionation. Selective trapping of colloids according to their size can be achieved by a suitable choice of the experimental parameters, such as the adsorption rates and the freezing speed.
△ Less
Submitted 27 November, 2018;
originally announced November 2018.
-
Capillary imbibition in a square tube
Authors:
Tian Yu,
Jiajia Zhou,
Masao Doi
Abstract:
When a square tube is brought in contact with bulk liquid, the liquid wets the corners of the tube, and creates finger-like wetted region. The wetting of the liquid then takes place with the growth of two parts, the bulk part where the cross section is entirely filled with the liquid and the finger part where the cross section of the tube is partially filled. In the previous works, the growth of t…
▽ More
When a square tube is brought in contact with bulk liquid, the liquid wets the corners of the tube, and creates finger-like wetted region. The wetting of the liquid then takes place with the growth of two parts, the bulk part where the cross section is entirely filled with the liquid and the finger part where the cross section of the tube is partially filled. In the previous works, the growth of these two parts has been discussed separately. Here we conduct the analysis by explicitly accounting for the coupling of the two parts. We propose coupled equations for the liquid imbibition in both parts and show that (a) the length of each part, $h_0$ and $h_1$, both increases in time $t$ following the Lucas-Washburn's law, $h_0 \sim t^{1/2}$ and $h_1 \sim t^{1/2}$, but that (b) the coefficients are different from those obtained in the previous analysis which ignored the coupling.
△ Less
Submitted 29 October, 2018;
originally announced October 2018.
-
Dynamics of Viscoelastic Filaments Based on Onsager Principle
Authors:
Jiajia Zhou,
Masao Doi
Abstract:
When a polymer solution is uniaxially stretched and held fixed at both ends, the solution quickly separates into droplets connected by strings and takes the beads-on-string structure. The string then becomes thinner by capillary forces. Here we develop a theoretical framework on viscoelastic fluids based on Onsager principle, and apply it to the dynamics of viscoelastic filaments. We show that the…
▽ More
When a polymer solution is uniaxially stretched and held fixed at both ends, the solution quickly separates into droplets connected by strings and takes the beads-on-string structure. The string then becomes thinner by capillary forces. Here we develop a theoretical framework on viscoelastic fluids based on Onsager principle, and apply it to the dynamics of viscoelastic filaments. We show that the beads-on-string structure is a thermodynamic quasi-equilibrium state, and derive an equation for the coexistence condition in the pseudo-equilibrium state. Using the condition, we solve the evolution equation analytically and show that the string radius and the tensile stress vary exponentially as predicted by the classical theory of Entov and Hinch [J. Non-Newtonian Fluid Mech. 72, 31 (1997)], but the prefactor for the tensile stress is different from their theory and agrees with the numerical solutions of Clasen et al. [J. Fluid Mech. 556, 283 (2006)].
△ Less
Submitted 10 August, 2018;
originally announced August 2018.
-
Multi-Ring Deposition Pattern of Drying Droplets
Authors:
Mengmeng Wu,
Xingkun Man,
Masao Doi
Abstract:
We propose a theory for the multi-ring pattern of the deposits that are formed when droplets of suspension are dried on a substrate. Assuming a standard model for the stick-slip motion of the contact line, we show that as droplets evaporate, many concentric rings of deposits are formed, but are taken over by a solid-circle pattern in the final stage of drying. An analytical expression is given to…
▽ More
We propose a theory for the multi-ring pattern of the deposits that are formed when droplets of suspension are dried on a substrate. Assuming a standard model for the stick-slip motion of the contact line, we show that as droplets evaporate, many concentric rings of deposits are formed, but are taken over by a solid-circle pattern in the final stage of drying. An analytical expression is given to indicate when ring-pattern changes to solid-circle pattern during an evaporation process. The results are in qualitative agreement with existing experiments, and the other predictions on how the evaporation rate, droplet radius and receding contact angle affect the pattern are all subject to experimental test.
△ Less
Submitted 25 July, 2018;
originally announced July 2018.
-
Capillary filling in closed-end nanotubes
Authors:
Chen Zhao,
Jiajia Zhou,
Masao Doi
Abstract:
Capillary filling in small length scale is an important process in nanotechnology and microfabrication. When one end of the tube or channel is sealed, it is important to consider the escape of the trapped gas. We develop a dynamic model on capillary filling in closed-end tubes, based on the diffusion-convection equation and Henry's law of gas dissolution. We systematically investigate the filling…
▽ More
Capillary filling in small length scale is an important process in nanotechnology and microfabrication. When one end of the tube or channel is sealed, it is important to consider the escape of the trapped gas. We develop a dynamic model on capillary filling in closed-end tubes, based on the diffusion-convection equation and Henry's law of gas dissolution. We systematically investigate the filling dynamics for various sets of parameters, and compare the results with a previous model which assumes a linear density profile of dissolved gas and neglect the convective term.
△ Less
Submitted 10 January, 2018;
originally announced January 2018.
-
Structure Formation in Soft Matter Solutions Induced by Solvent Evaporation
Authors:
Jiajia Zhou,
Xingkun Man,
Ying Jiang,
Masao Doi
Abstract:
Solvent evaporation in soft matter solutions (solutions of colloidal particles, polymers and their mixtures) is an important process in material making and in printing and coating industries. The solvent evaporation process determines the structure of the materials, and strongly affects their performance. Solvent evaporation involves many physico-chemical processes: flow, diffusion, crystallizatio…
▽ More
Solvent evaporation in soft matter solutions (solutions of colloidal particles, polymers and their mixtures) is an important process in material making and in printing and coating industries. The solvent evaporation process determines the structure of the materials, and strongly affects their performance. Solvent evaporation involves many physico-chemical processes: flow, diffusion, crystallization, gelation, glass transition, etc., and is quite complex. In this article, we report recent progresses in this important process, with a special focus on theoretical and simulation studies.
△ Less
Submitted 11 August, 2017;
originally announced August 2017.
-
Vapor-Induced Motion of Liquid Droplets on an Inert Substrate
Authors:
Xingkun Man,
Masao Doi
Abstract:
Evaporating droplets are known to show complex motion that has conventionally been explained by the Marangoni effect (flow induced by the gradient of surface tension). Here, we show that the droplet motion can be induced even in the absence of the Marangoni effect due to the gradient of evaporation rate. We derive an equation for the velocity of a droplet subject to non-uniform evaporation rate an…
▽ More
Evaporating droplets are known to show complex motion that has conventionally been explained by the Marangoni effect (flow induced by the gradient of surface tension). Here, we show that the droplet motion can be induced even in the absence of the Marangoni effect due to the gradient of evaporation rate. We derive an equation for the velocity of a droplet subject to non-uniform evaporation rate and non-uniform surface tension placed on an inert substrate where the wettability is uniform and unchanged. The equation explains the previously observed attraction-repulsion- chasing behaviors of evaporating droplets.
△ Less
Submitted 30 June, 2017;
originally announced June 2017.
-
Cross-interaction drives stratification in drying film of binary colloidal mixtures
Authors:
Jiajia Zhou,
Ying Jiang,
Masao Doi
Abstract:
When a liquid film of colloidal solution consisting of particles of different sizes is dried on a substrate, the colloids often stratify, where smaller colloids are laid upon larger colloids. This phenomenon is counter intuitive because larger colloids which have smaller diffusion constant are expected to remain near the surface during the drying process, leaving the layer of larger colloids on to…
▽ More
When a liquid film of colloidal solution consisting of particles of different sizes is dried on a substrate, the colloids often stratify, where smaller colloids are laid upon larger colloids. This phenomenon is counter intuitive because larger colloids which have smaller diffusion constant are expected to remain near the surface during the drying process, leaving the layer of larger colloids on top of smaller colloids. Here we show that the phenomenon is caused by the interaction between the colloids, and can be explained by the diffusion model which accounts for the interaction between the colloids. By studying the evolution equation both numerically and analytically, we derive the condition at which the stratified structures are obtained.
△ Less
Submitted 10 February, 2017;
originally announced February 2017.
-
Porosity governs normals stresses in polymer gels
Authors:
Henri C. G. de Cagny,
Bart E. Vos,
Mahsa Vahabi,
Nicholas A. Kurniawan,
Masao Doi,
Gijsje H. Koenderink,
Fred C. MacKintosh,
Daniel Bonn
Abstract:
When sheared, most elastic solids such as metals, rubbers and polymer hydrogels dilate in the direction perpendicular to the shear plane. This well-known behaviour known as the Poynting effect is characterized by a positive normal stress. Surprisingly, biopolymer gels made of fibrous proteins such as fibrin and collagen, as well as many biological tissues exhibit the opposite effect, contracting u…
▽ More
When sheared, most elastic solids such as metals, rubbers and polymer hydrogels dilate in the direction perpendicular to the shear plane. This well-known behaviour known as the Poynting effect is characterized by a positive normal stress. Surprisingly, biopolymer gels made of fibrous proteins such as fibrin and collagen, as well as many biological tissues exhibit the opposite effect, contracting under shear and displaying a negative normal stress. Here we show that this anomalous behaviour originates from the open network structure of biopolymer gels, which facilitates interstitial fluid flow during shear. Using fibrin networks with a controllable pore size as a model system, we show that the normal stress response to an applied shear is positive at short times, but decreases to negative values with a characteristic time scale set by pore size. Using a two-fluid model, we develop a quantitative theory that unifies the opposite behaviours encountered in synthetic and biopolymer gels. Synthetic polymer gels are impermeable to solvent flow and thus effectively incompressible at typical experimental time scales, whereas biopolymer gels are effectively compressible. Our findings suggest a new route to tailor elastic instabilities such as the die-swell effect that often hamper processing of polymer materials and furthermore show that poroelastic effects play a much more important role in the mechanical properties of cells and tissues than previously anticipated.
△ Less
Submitted 21 October, 2016; v1 submitted 13 May, 2016;
originally announced May 2016.
-
Ring to Mountain Transition in Deposition Pattern of Drying
Authors:
Xingkun Man,
Masao Doi
Abstract:
When a droplet containing a non-volatile component is dried on a substrate, it leaves a ringlike deposit on the substrate. We propose a theory which predicts the deposit distribution based on a model of fluid flow and contact line motion of the droplet. It is shown that the deposition pattern changes continuously from coffee-ring to volcano-like and to mountain-like depending on the mobility of th…
▽ More
When a droplet containing a non-volatile component is dried on a substrate, it leaves a ringlike deposit on the substrate. We propose a theory which predicts the deposit distribution based on a model of fluid flow and contact line motion of the droplet. It is shown that the deposition pattern changes continuously from coffee-ring to volcano-like and to mountain-like depending on the mobility of the contact line and the evaporation rate. Analytical expression is given for the peak position of the distribution of deposit left on the substrate.
△ Less
Submitted 15 February, 2016;
originally announced February 2016.
-
Contact angle saturation in electrowetting: Injection of ions into the surrounding media
Authors:
Tetsuya Yamamoto,
Masao Doi,
David Andelman
Abstract:
We use the Poisson-Boltzmann theory to predict contact angle saturation of aqueous droplets in electrowetting. Our theory predicts that injection of ions from the droplet into its surrounding medium is responsible for the deviation of the apparent contact angle from the Young-Lippmann equation for large applied voltages. The ion injection substantially decreases the Maxwell stress and increases th…
▽ More
We use the Poisson-Boltzmann theory to predict contact angle saturation of aqueous droplets in electrowetting. Our theory predicts that injection of ions from the droplet into its surrounding medium is responsible for the deviation of the apparent contact angle from the Young-Lippmann equation for large applied voltages. The ion injection substantially decreases the Maxwell stress and increases the osmotic pressure at the interface between the two media, leading to saturation of the apparent contact angle. Moreover, we find that the contact angle does not saturate, but only has a broad minimum that increases again upon further increase of the applied voltage, in agreement with experiments.
△ Less
Submitted 2 October, 2015;
originally announced October 2015.
-
The "coin-through-the-rubber" trick: an elastically stabilized invagination
Authors:
Fanlong Meng,
Masao Doi,
Zhongcan Ouyang,
Xiaoyu Zheng,
Peter Palffy-Muhoray
Abstract:
A spectacular trick of close-up magicians involves the apparent passing of a coin through a rubber sheet. The magic is based on the unusual elastic response of a thin rubber sheet: the formation of an invagination, stabilized by friction and elasticity, which holds the coin. By pressing on the coin, the invagination becomes unstable, and the coin is released. We describe the deformation analytical…
▽ More
A spectacular trick of close-up magicians involves the apparent passing of a coin through a rubber sheet. The magic is based on the unusual elastic response of a thin rubber sheet: the formation of an invagination, stabilized by friction and elasticity, which holds the coin. By pressing on the coin, the invagination becomes unstable, and the coin is released. We describe the deformation analytically using a simple Hookean description, and examine the stability of the invagination. We finally compare the prediction of the Hookean analysis with numerical solutions of the neo-Hookean model, and provide a brief commentary on the origins of the trick.
△ Less
Submitted 22 September, 2015; v1 submitted 16 September, 2015;
originally announced September 2015.
-
Phase diagrams in inflating balloon
Authors:
Fanlong Meng,
Masao Doi,
Zhongcan Ouyang
Abstract:
Volume transition of an inflating cylindrical balloon made of rubber under external force $F$ is studied based on the non-linear elastic theory for rubber. The pressure difference $ΔP$ between inside and outside of the balloon is calculated as a function of the volume $V$ of the fluid inside the balloon. It is shown that if $F$ is smaller than a critical value $F_c$, the inflation of the balloon t…
▽ More
Volume transition of an inflating cylindrical balloon made of rubber under external force $F$ is studied based on the non-linear elastic theory for rubber. The pressure difference $ΔP$ between inside and outside of the balloon is calculated as a function of the volume $V$ of the fluid inside the balloon. It is shown that if $F$ is smaller than a critical value $F_c$, the inflation of the balloon takes place with coexistence of strongly inflated region and weakly inflated region, while if $F$ is larger than $F_c$, the inflation takes place uniformly. It is shown that the critical force $F_c$ depends on the material parameter of the rubber, and that the discontinuous transition for finite stretching force can take place only when the rubber has enough stretchability
△ Less
Submitted 15 July, 2013;
originally announced July 2013.
-
Sb-NQR probe for multipole degree of freedom in the first Pr-based heavy-fermion superconductor PrOs$_{4}$Sb$_{12}$
Authors:
Hideki Tou,
Masahiro Doi,
Masafumi Sera,
Mamoru Yogi,
Hitoshi Sugawara,
Ryousuke Shiina,
Hideyuki Sato
Abstract:
We report $^{121,123}$Sb nuclear quadrupole resonance (NQR) measurements in the filled-skutterudite superconductor PrOs$_4$Sb$_{12}$ in the temperature range of 0.05-30 K. The electric field gradients (EFG), $V_{zz}$ and $V_{xx}-V_{yy}$, at the Sb site exhibit unusual temperature dependence below 30 K. To explain these features, we discuss the coupling between the Sb nuclear quadrupole moment an…
▽ More
We report $^{121,123}$Sb nuclear quadrupole resonance (NQR) measurements in the filled-skutterudite superconductor PrOs$_4$Sb$_{12}$ in the temperature range of 0.05-30 K. The electric field gradients (EFG), $V_{zz}$ and $V_{xx}-V_{yy}$, at the Sb site exhibit unusual temperature dependence below 30 K. To explain these features, we discuss the coupling between the Sb nuclear quadrupole moment and Pr $4f^2$-derived multipole moments. The observed $T$ dependence of EFG is well explained by the CEF quasi-quartet consisted of $Γ_1$ singlet and $Γ_4^{(2)}$ triplet states in the cubic point group $T_h$. These results, in turn, are indicative of the importance of the coupling between the $^{121,123}$Sb quadrupole moments and the hexadecapole moment caused by the quasi-quartet.
△ Less
Submitted 22 August, 2005;
originally announced August 2005.
-
Calculation of the Micellar Structure of Polymer Surfactant Based on the Density Functional Theory
Authors:
Takashi Uneyama,
Masao Doi
Abstract:
Amphiphilic block copolymer solutions form various micellar structures including micelles and vesicles. We applied the density functional theory for block copolymers which we have proposed to amphiphilic block copolymer systems. The 3 dimensional simulation for AB diblock copolymer solutions and AB diblock copolymer / A homopolymer blends has been done and it is shown that the spherical micelles…
▽ More
Amphiphilic block copolymer solutions form various micellar structures including micelles and vesicles. We applied the density functional theory for block copolymers which we have proposed to amphiphilic block copolymer systems. The 3 dimensional simulation for AB diblock copolymer solutions and AB diblock copolymer / A homopolymer blends has been done and it is shown that the spherical micelles, cylindrical micelles and spherical vesicles are formed. It is also shown that the phase diagram for AB diblock copolymer / A homopolymer blends qualitatively agrees with the phase diagram obtained by the experiment.
△ Less
Submitted 25 April, 2005;
originally announced April 2005.
-
Density Functional Theory for Block Copolymer Melts and Blends
Authors:
Takashi Uneyama,
Masao Doi
Abstract:
We derive an expression for the free energy of the blends of block copolymers expressed as a functional of the density distribution of the monomer of each block. The expression is a generalization of the Flory-Huggins-de Gennes theory for homo polymer blends, and also a generalization of the Ohta-Kawasaki theory for the melts of diblock copolymers. The expression can be used for any blends of ho…
▽ More
We derive an expression for the free energy of the blends of block copolymers expressed as a functional of the density distribution of the monomer of each block. The expression is a generalization of the Flory-Huggins-de Gennes theory for homo polymer blends, and also a generalization of the Ohta-Kawasaki theory for the melts of diblock copolymers. The expression can be used for any blends of homopolymers and block copolymers of any topological structure. The expression gives a fast and stable computational method to calculate the micro and macro phase separation of the blends of homopolymers and block copolymers.
△ Less
Submitted 15 October, 2004;
originally announced October 2004.
