Showing 1–9 of 9 results for author: Dixit, V

Interface-sensitive microwave loss in superconducting tantalum films sputtered on c-plane sapphire

Authors: Anthony P. McFadden, Jinsu Oh, Lin Zhou, Trevyn F. Q. Larson, Stephen Gill, Akash V. Dixit, Raymond Simmonds, Florent Lecocq

Abstract: Quantum coherence in superconducting circuits has increased steadily over the last decades as a result of a growing understanding of the various loss mechanisms. Recently, tantalum (Ta) emerged as a promising material to address microscopic sources of loss found on niobium (Nb) or aluminum (Al) surfaces. However, the effects of film and interface microstructure on low-temperature microwave loss ar… ▽ More Quantum coherence in superconducting circuits has increased steadily over the last decades as a result of a growing understanding of the various loss mechanisms. Recently, tantalum (Ta) emerged as a promising material to address microscopic sources of loss found on niobium (Nb) or aluminum (Al) surfaces. However, the effects of film and interface microstructure on low-temperature microwave loss are still not well understood. Here we present a systematic study of the structural and electrical properties of Ta and Nb films sputtered on c-plane sapphire at varying growth temperatures. As growth temperature is increased, our results show that the onset of epitaxial growth of alpha-phase Ta correlates with lower Ta surface roughness, higher critical temperature, and higher residual resistivity ratio, but surprisingly also correlates with a significant increase in loss at microwave frequency. Notably, this high level of loss is not observed in Nb films prepared in the same way and having very similar structure. By experimentally controlling the surface on which the Ta film is nucleated, we determine that the source of loss is only present in samples having an epitaxial Ta/sapphire interface and show that it is apparently mitigated by either growing a thin, epitaxial Nb inter-layer between the Ta film and the substrate or by intentionally treating, and effectively damaging, the sapphire surface with an in-situ argon plasma before Ta growth. In addition to elucidating this interfacial microwave loss, this work provides adequate process details to aid reproducible growth of low-loss Ta films across fabrication facilities. △ Less

Submitted 11 June, 2025; v1 submitted 21 December, 2024; originally announced December 2024.

Detecting Thermodynamic Phase Transition via Explainable Machine Learning of Photoemission Spectroscopy

Authors: Xu Chen, Yuanjie Sun, Eugen Hruska, Vivek Dixit, Jinming Yang, Yu He, Yao Wang, Fang Liu

Abstract: Identifying thermodynamic signatures of electronic phases, such as superconductivity, is challenging in low-dimensional materials due to strong fluctuations and low probing volume. Spectroscopic methods are often used to identify new bulk phases, but their main measurable quantity -- electronic energy gaps -- is no longer an effective order parameter in low-dimensional and fluctuating systems. Com… ▽ More Identifying thermodynamic signatures of electronic phases, such as superconductivity, is challenging in low-dimensional materials due to strong fluctuations and low probing volume. Spectroscopic methods are often used to identify new bulk phases, but their main measurable quantity -- electronic energy gaps -- is no longer an effective order parameter in low-dimensional and fluctuating systems. Combining angle-resolved photoemission with a domain-adversarial neural network, we report a data-driven method to identify thermodynamic phase transitions solely based on single-particle spectra. We demonstrate 97.6$\%$ accuracy in cuprate superconductor Bi$_2$Sr$_2$CaCu$_2$O$_{8+δ}$ with strong superconducting fluctuations. This model notably compensates for the scarcity of experimental data by leveraging virtually inexhaustible simulated data. Further, its explainability reveals the crucial role of in-gap spectral weight in detecting phase fluctuations and thermodynamic transitions. Our work pinpoints the spectroscopic signatures of fluctuating orders and enables using spectroscopy for machine-learning-assisted material discovery for low-dimensional and strong coupling systems. △ Less

Submitted 14 April, 2025; v1 submitted 6 June, 2024; originally announced June 2024.

Comments: 10 pages, 6 figures

Journal ref: Newton 1, 100066 (2025)

First principle investigations of the structural, electronic, and phase stability in 2D layered ZnSb

Authors: Dinesh Thapa, Junseong Song, Vivek Dixit, Santosh KC, Bipin Lamichhane, Chandani N. Nandadasa, Kimoon Lee, Sung Wng Kim, Seong-Gon Kim

Abstract: Recently, the two dimensional (2D) materials have become a potential candidates for various technological applications in spintronics and optoelectronics. In the present study, the structural, electronic, and phase stability of 2D layered ZnSb compounds of four different phases viz. wurzite(w), tetragonal (t), hexagonal (h), and orthorhombic (o) have been tuned using the first principle calculatio… ▽ More Recently, the two dimensional (2D) materials have become a potential candidates for various technological applications in spintronics and optoelectronics. In the present study, the structural, electronic, and phase stability of 2D layered ZnSb compounds of four different phases viz. wurzite(w), tetragonal (t), hexagonal (h), and orthorhombic (o) have been tuned using the first principle calculations based on density functional theory (DFT). We invoked the Perdew-Burke-Ernzerhof (PBE) functional and the projected augmented wave (PAW) method during all the calculations. Based on our numerical results, we predicted the novel tetragonal phase as stable phase of ZnSb next to existing orthorhombic structure. We reported the pressure induced phase transition between orthorhombic to tetragonal phase at 12.48 GPa/atom. The projected density of states indicates the strong p-d hybridization between Sb-5p and Zn-3d states confirming the nature of strong covalent bonding between them. The electronic band structures suggest that t-ZnSb, w-ZnSb, and h-ZnSb are metallic in nature whereas o-ZnSb is semiconducting with narrow band gap of 0.03 eV using PBE. We predicted the possibility of extracting the two dimensional (2D) monolayer sheet in t-ZnSb and o-ZnSb according to the exfoliation energy criterion. In addition, the 2D monolayer (ML) of o-ZnSb has been predicted to be dynamically stable but that of t-ZnSb is not stable as manifested in phonon dispersion bands. Surprisingly, the semiconducting band gap nature of o-ZnSb changes from indirect and narrow to direct and sizable while going from 3D bulk to 2D ML structure. Further, we estimated the value of work functions for the surfaces of t-ZnSb and o-ZnSb as 4.61 eV and 4.04 eV respectively. Such materials can find the niche applications in next generation electronic devices utilizing 2D hetero-structures. △ Less

Submitted 24 March, 2022; v1 submitted 20 June, 2021; originally announced June 2021.

Seamless high-Q microwave cavities for multimode circuit QED

Authors: Srivatsan Chakram, Andrew E. Oriani, Ravi K. Naik, Akash V. Dixit, Kevin He, Ankur Agrawal, Hyeokshin Kwon, David I. Schuster

Abstract: Multimode cavity quantum electrodynamics ---where a two-level system interacts simultaneously with many cavity modes---provides a versatile framework for quantum information processing and quantum optics. Due to the combination of long coherence times and large interaction strengths, one of the leading experimental platforms for cavity QED involves coupling a superconducting circuit to a 3D microw… ▽ More Multimode cavity quantum electrodynamics ---where a two-level system interacts simultaneously with many cavity modes---provides a versatile framework for quantum information processing and quantum optics. Due to the combination of long coherence times and large interaction strengths, one of the leading experimental platforms for cavity QED involves coupling a superconducting circuit to a 3D microwave cavity. In this work, we realize a 3D multimode circuit QED system with single photon lifetimes of $2$ ms and cooperativities of $0.5-1.5\times10^9$ across 9 modes of a novel seamless cavity. We demonstrate a variety of protocols for universal single-mode quantum control applicable across all cavity modes, using only a single drive line. We achieve this by developing a straightforward flute method for creating monolithic superconducting microwave cavities that reduces loss while simultaneously allowing control of the mode spectrum and mode-qubit interaction. We highlight the flexibility and ease of implementation of this technique by using it to fabricate a variety of 3D cavity geometries, providing a template for engineering multimode quantum systems with exceptionally low dissipation. This work is an important step towards realizing hardware efficient random access quantum memories and processors, and for exploring quantum many-body physics with photons. △ Less

Submitted 11 November, 2020; v1 submitted 30 October, 2020; originally announced October 2020.

Comments: 5 pages of main text with 4 figures. 9 pages of supplementary information with 7 figures

Journal ref: Phys. Rev. Lett. 127, 107701 (2021)

Multimode photon blockade

Authors: Srivatsan Chakram, Kevin He, Akash V. Dixit, Andrew E. Oriani, Ravi K. Naik, Nelson Leung, Hyeokshin Kwon, Wen-Long Ma, Liang Jiang, David I. Schuster

Abstract: Interactions are essential for the creation of correlated quantum many-body states. While two-body interactions underlie most natural phenomena, three- and four-body interactions are important for the physics of nuclei [1], exotic few-body states in ultracold quantum gases [2], the fractional quantum Hall effect [3], quantum error correction [4], and holography [5, 6]. Recently, a number of artifi… ▽ More Interactions are essential for the creation of correlated quantum many-body states. While two-body interactions underlie most natural phenomena, three- and four-body interactions are important for the physics of nuclei [1], exotic few-body states in ultracold quantum gases [2], the fractional quantum Hall effect [3], quantum error correction [4], and holography [5, 6]. Recently, a number of artificial quantum systems have emerged as simulators for many-body physics, featuring the ability to engineer strong interactions. However, the interactions in these systems have largely been limited to the two-body paradigm, and require building up multi-body interactions by combining two-body forces. Here, we demonstrate a pure N-body interaction between microwave photons stored in an arbitrary number of electromagnetic modes of a multimode cavity. The system is dressed such that there is collectively no interaction until a target total photon number is reached across multiple distinct modes, at which point they interact strongly. The microwave cavity features 9 modes with photon lifetimes of $\sim 2$ ms coupled to a superconducting transmon circuit, forming a multimode circuit QED system with single photon cooperativities of $\sim10^9$. We generate multimode interactions by using cavity photon number resolved drives on the transmon circuit to blockade any multiphoton state with a chosen total photon number distributed across the target modes. We harness the interaction for state preparation, preparing Fock states of increasing photon number via quantum optimal control pulses acting only on the cavity modes. We demonstrate multimode interactions by generating entanglement purely with uniform cavity drives and multimode photon blockade, and characterize the resulting two- and three-mode W states using a new protocol for multimode Wigner tomography. △ Less

Submitted 28 October, 2020; originally announced October 2020.

Comments: 5 pages of main text with 5 figures. 11 pages of supplementary information with 10 figures

Correlation between site preference and magnetic properties of Zn-Sn-substituted strontium hexaferrite

Authors: Vivek Dixit, Dinesh Thapa, Bipin Lamichhane, Chandani N. Nandadasa, Yang-Ki Hong, Seong-Gon Kim

Abstract: The site preference and magnetic properties of Zn, Sn and Zn-Sn substituted M-type strontium hexaferrite (SrFe$_{12}$O$_{19}$) have been investigated using first-principles total energy calculations based on density functional theory. The site occupancy of substituted atoms were estimated by calculating the substitution energies of different configurations. The distribution of different configurat… ▽ More The site preference and magnetic properties of Zn, Sn and Zn-Sn substituted M-type strontium hexaferrite (SrFe$_{12}$O$_{19}$) have been investigated using first-principles total energy calculations based on density functional theory. The site occupancy of substituted atoms were estimated by calculating the substitution energies of different configurations. The distribution of different configurations during the annealing process at high temperature was determined using the formation probabilities of configurations to calculate magnetic properties of substituted strontium hexaferrite. We found that the magnetization and magnetocrystalline anisotropy are closely related to the distributions of Zn-Sn ions on the five Fe sites. Our calculation show that in SrFe$_{11.5}$Zn$_{0.5}$O$_{19}$, Zn atoms prefer to occupy $4f_1$, $12k$, and $2a$ sites with occupation probability of 78%, 19% and 3%, respectively, while in SrFe$_{11.5}$SnO$_{19}$, Sn atoms occupy the $12k$ and $4f_2$ sites with occupation probability of 54% and 46%, respectively. We also found that in SrFe$_{11}$Zn$_{0.5}$Sn$_{0.5}$O$_{19}$, (Zn,Sn) atom pairs prefer to occupy the ($4f_1$, $4f_2$), ($4f_1$, $12k$) and ($12k$, $12k$) sites with occupation probability of 82%, 8% and 6%, respectively. Our calculation shows that the increase of magnetization and the reduction of magnetic anisotropy in Zn-Sn substituted M-type strontium hexaferrite as observed experimentally is due to the occupation of (Zn,Sn) pairs at the ($4f_1$, $4f_2$) sites. △ Less

Submitted 19 November, 2018; v1 submitted 9 November, 2018; originally announced November 2018.

Comments: 8 pages, 4 figures

Site occupancy and magnetic properties of Al-substituted M-type strontium hexaferrite

Authors: Vivek Dixit, Chandani N. Nandadasa, Seong-Gon Kim, Sungho Kim, Jihoon Park, Yang-Ki Hong, Laalitha S. I. Liyanage, Amitava Moitra

Abstract: We use first-principles total-energy calculations based on density functional theory to study the site occupancy and magnetic properties of Al-substituted $M$-type strontium hexaferrite SrFe$_{12-x}$Al$_{x}$O$_{19}$ with $x=0.5$ and $x=1.0$. We find that the non-magnetic Al$^{3+}$ ions preferentially replace Fe$^{3+}$ ions at two of the majority spin sites, $2a$ and $12k$, eliminating their positi… ▽ More We use first-principles total-energy calculations based on density functional theory to study the site occupancy and magnetic properties of Al-substituted $M$-type strontium hexaferrite SrFe$_{12-x}$Al$_{x}$O$_{19}$ with $x=0.5$ and $x=1.0$. We find that the non-magnetic Al$^{3+}$ ions preferentially replace Fe$^{3+}$ ions at two of the majority spin sites, $2a$ and $12k$, eliminating their positive contribution to the total magnetization causing the saturation magnetization $M_s$ to be reduced as Al concentration $x$ is increased. Our formation probability analysis further provides the explanation for increased magnetic anisotropy field when the fraction of Al is increased. Although Al$^{3+}$ ions preferentially occupy the $2a$ sites at a low temperature, the occupation probability of the $12k$ site increases with the rise of the temperature. At a typical annealing temperature ($> 700\,^{\circ}{\rm C}$) Al$^{3+}$ ions are much more likely to occupy the $12k$ site than the $2a$ site. Although this causes the magnetocrystalline anisotropy $K_1$ to be reduced slightly, the reduction in $M_s$ is much more significant. Their combined effect causes the anisotropy field $H_a$ to increase as the fraction of Al is increased, consistent with recent experimental measurements. △ Less

Submitted 27 April, 2015; v1 submitted 9 April, 2015; originally announced April 2015.

Comments: 8 pages, 5 figures. arXiv admin note: text overlap with arXiv:1209.5143

Hydrogen storage in carbon derived from solid endosperm of coconut

Authors: Viney Dixit, Ashish Bhatnagar, R. R. Shahi, T. P. Yadav, O. N. Srivastava

Abstract: Carbons are being widely investigated as hydrogen storage material owing to their light weight, fast hydrogen adsorption kinetics and cost effectiveness. However, these materials suffer from low hydrogen storage capacity, particularly at room temperature. The aim of the present study is to develop carbon-based material from natural bio-precursor which shows at least moderate hydrogen storage at ro… ▽ More Carbons are being widely investigated as hydrogen storage material owing to their light weight, fast hydrogen adsorption kinetics and cost effectiveness. However, these materials suffer from low hydrogen storage capacity, particularly at room temperature. The aim of the present study is to develop carbon-based material from natural bio-precursor which shows at least moderate hydrogen storage at room temperature. For this purpose, hydrogenation characteristics of carbon derived from solid endosperm of coconut is studied. Solid endosperm and its carbonized version have a native grown distribution of light elements like K (from KCl), Na, Mg, etc. The hydrogen storage measurements reveal that the as synthesized materials have good hydrogen adsorption and desorption capacity with fast kinetics. The synthesized material adsorbs 2.30 wt. % at room temperature and 8.00 wt.% at liquid nitrogen temperature under 70 atm pressure. The present work is likely to initiate research on native light metal bearing carbon derived from natural precursors. △ Less

Submitted 25 September, 2014; originally announced September 2014.

Comments: 10 pages 5 Figures

Alloying induced degradation of the absorption edge of InAs_{x}Sb_{1-x}

Authors: Bhavtosh Bansal, V. K. Dixit, V. Venkataraman, H. L. Bhat

Abstract: InAs_{x}Sb_{1-x} alloys show a strong bowing in the energy gap, the energy gap of the alloy can be less than the gap of the two parent compounds. We demonstrate that a consequence of this alloying is a systematic degradation in the sharpness of the absorption edge. The alloy disorder induced band-tail (Urbach tail) characteristics are quantitatively studied for InAs_{0.05}Sb_{0.95}. InAs_{x}Sb_{1-x} alloys show a strong bowing in the energy gap, the energy gap of the alloy can be less than the gap of the two parent compounds. We demonstrate that a consequence of this alloying is a systematic degradation in the sharpness of the absorption edge. The alloy disorder induced band-tail (Urbach tail) characteristics are quantitatively studied for InAs_{0.05}Sb_{0.95}. △ Less

Submitted 22 February, 2007; originally announced February 2007.

Comments: 3 figures