-
Self-ordered nanostructures on patterned substrates: Experiment and theory of metalorganic vapor-phase epitaxy of V-groove quantum wires and pyramidal quantum dots
Authors:
Emanuele Pelucchi,
Stefano T. Moroni,
Valeria Dimastrodonato,
Dimitri D. Vvedensky
Abstract:
The formation of nanostructures during metalorganic vapor-phase epitaxy on patterned (001)/(111)B GaAs substrates is reviewed. The focus of this review is on the seminal experiments that revealed the key kinetic processes during nanostructure formation and the theory and modelling that explained the phenomenology in successively greater detail. Experiments have demonstrated that V-groove quantum w…
▽ More
The formation of nanostructures during metalorganic vapor-phase epitaxy on patterned (001)/(111)B GaAs substrates is reviewed. The focus of this review is on the seminal experiments that revealed the key kinetic processes during nanostructure formation and the theory and modelling that explained the phenomenology in successively greater detail. Experiments have demonstrated that V-groove quantum wires and pyramidal quantum dots result from self-limiting concentration profiles that develop at the bottom of V-grooves and inverted pyramids, respectively. In the 1950s, long before the practical importance of patterned substrates became evident, the mechanisms of capillarity during the equilibration of non-planar surfaces were identified and characterized. This was followed, from the late 1980s by the identification of growth rate anisotropies (i.e. differential growth rates of crystallographic facets) and precursor decomposition anisotropies, with parallel developments in the fabrication of V-groove quantum wires and pyramidal quantum dots. The modelling of these growth processes began at the scale of facets and culminated in systems of coupled reaction-diffusion equations, one for each crystallographic facet that defines the pattern, which takes account of the decomposition and surface diffusion kinetics of the group-III precursors and the subsequent surface diffusion and incorporation of the group-III atoms released by these precursors. Solutions of the equations with optimized parameters produced concentration profiles that provided a quantitative interpretation of the time-, temperature-, and alloy-concentration dependence of the self-ordering process seen in experiments.
△ Less
Submitted 8 February, 2018;
originally announced February 2018.
-
Issues related to the usage of nitrogen as carrier gas for the MOVPE growth of GaSb/InAs heterostructures on InAs pseudosubstrates
Authors:
Hanno Kroencke,
Agnieszka Gocalinska,
Valeria Dimastrodonato,
Marina Manganaro,
Emanuele Pelucchi
Abstract:
GaSb/InAs/GaSb layer stacks have been grown on InAs metamorphic substrates (pseudosubstrates) by MOVPE, using nitrogen as major carrier gas. We demonstrate that GaSb growth by nitrogen MOVPE on InAs metamorphic substrates (and on InAs wafers) is possible in a very narrow range of growth parameters. As demonstrators, GaSb/InAs/GaSb structures were grown for electron mobility tests, obtaining (unint…
▽ More
GaSb/InAs/GaSb layer stacks have been grown on InAs metamorphic substrates (pseudosubstrates) by MOVPE, using nitrogen as major carrier gas. We demonstrate that GaSb growth by nitrogen MOVPE on InAs metamorphic substrates (and on InAs wafers) is possible in a very narrow range of growth parameters. As demonstrators, GaSb/InAs/GaSb structures were grown for electron mobility tests, obtaining (unintentional) 2D electron gas densities in the order of 9/5x10e12 cm(e-2) and mobilities up to 1.2/1.8x10e4 cm(e2)/Vs at room and liquid nitrogen temperature respectively. We show that it is beneficial to have some hydrogen in the carrier gas mixture for GaSb growth to achieve good crystal quality, morphology and electrical properties. Furthermore, an unexpected and previously unreported decomposition process of GaSb is observed at relatively low growth temperatures under the supply of the precursors for InAs epitaxial overgrowth. This nevertheless gets suppressed at even lower growth temperatures.
△ Less
Submitted 24 June, 2016;
originally announced June 2016.
-
Indium segregation during III-V quantum wire and quantum dot formation on patterned substrates
Authors:
Stefano T. Moroni,
Valeria Dimastrodonato,
Tung-Hsun Chung,
Gediminas Juska,
Agnieszka Gocalinska,
Dimitri D. Vvedensky,
Emanuele Pelucchi
Abstract:
We report a model for metalorganic vapor-phase epitaxy on non-planar substrates, specifically V-grooves and pyramidal recesses, which we apply to the growth of InGaAs nanostructures. This model, based on a set of coupled reaction-diffusion equations, one for each facet in the system, accounts for the facet-dependence of all kinetic processes (e.g., precursor decomposition, adatom diffusion, and ad…
▽ More
We report a model for metalorganic vapor-phase epitaxy on non-planar substrates, specifically V-grooves and pyramidal recesses, which we apply to the growth of InGaAs nanostructures. This model, based on a set of coupled reaction-diffusion equations, one for each facet in the system, accounts for the facet-dependence of all kinetic processes (e.g., precursor decomposition, adatom diffusion, and adatom lifetimes) and has been previously applied to account for the temperature, concentration, and temporal-dependence of AlGaAs nanostructures on GaAs (111)B surfaces with V-grooves and pyramidal recesses. In the present study, the growth of In$_{0.12}$Ga$_{0.88}$As quantum wires at the bottom of V-grooves is used to determine a set of optimized kinetic parameters. Based on these parameters, we have modeled the growth of In$_{0.25}$Ga$_{0.75}$As nanostructures formed in pyramidal site-controlled quantum-dot systems, successfully producing a qualitative explanation for the temperature-dependence of their optical properties, which have been reported in previous studies. Finally, we present scanning electron and cross-sectional atomic force microscopy images which show previously unreported facetting at the bottom of the pyramidal recesses that allow quantum dot formation.
△ Less
Submitted 11 April, 2016;
originally announced April 2016.
-
Single pairs of time-bin entangled photons
Authors:
Marijn A. M. Versteegh,
Michael E. Reimer,
Aafke A. van den Berg,
Gediminas Juska,
Valeria Dimastrodonato,
Agnieszka Gocalinska,
Emanuele Pelucchi,
Val Zwiller
Abstract:
Time-bin entangled photons are ideal for long-distance quantum communication via optical fibers. Here we present a source where, even at high creation rates, each excitation pulse generates at most one time-bin entangled pair. This is important for the accuracy and security of quantum communication. Our site-controlled quantum dot generates single polarization-entangled photon pairs, which are the…
▽ More
Time-bin entangled photons are ideal for long-distance quantum communication via optical fibers. Here we present a source where, even at high creation rates, each excitation pulse generates at most one time-bin entangled pair. This is important for the accuracy and security of quantum communication. Our site-controlled quantum dot generates single polarization-entangled photon pairs, which are then converted, without loss of entanglement strength, into single time-bin entangled photon pairs.
△ Less
Submitted 7 July, 2015;
originally announced July 2015.
-
Evaluation of defect density by top-view large scale AFM on metamorphic structures grown by MOVPE
Authors:
Agnieszka Gocalinska,
Marina Manganaro,
Valeria Dimastrodonato,
Emanuele Pelucchi
Abstract:
We demonstrate an atomic force microscopy based method for estimation of defect density by identification of threading dislocations on a non-flat surface resulting from metamorphic growth. The discussed technique can be applied as an everyday evaluation tool for the quality of epitaxial structures and allow for cost reduction, as it lessens the amount of the transmission electron microscopy analys…
▽ More
We demonstrate an atomic force microscopy based method for estimation of defect density by identification of threading dislocations on a non-flat surface resulting from metamorphic growth. The discussed technique can be applied as an everyday evaluation tool for the quality of epitaxial structures and allow for cost reduction, as it lessens the amount of the transmission electron microscopy analysis required at the early stages of projects. Metamorphic structures with low surface defectivities (below 106) were developed successfully with the application of the technique, proving its usefulness in process optimisation.
△ Less
Submitted 3 June, 2015;
originally announced June 2015.
-
Conditions for entangled photon emission from (111)B site-controlled Pyramidal quantum dots
Authors:
G. Juska,
E. Murray,
V. Dimastrodonato,
T. H. Chung,
S. Moroni,
A. Gocalinska,
E. Pelucchi
Abstract:
A study of highly symmetric site-controlled Pyramidal In0.25Ga0.75As quantum dots (QDs) is presented. It is discussed that polarization-entangled photons can be also obtained from Pyramidal QDs of different designs from the one already reported in Juska et al. (Nat. Phot. 7, 527, 2013). Moreover, some of the limitations for a higher density of entangled photon emitters are addressed. Among these i…
▽ More
A study of highly symmetric site-controlled Pyramidal In0.25Ga0.75As quantum dots (QDs) is presented. It is discussed that polarization-entangled photons can be also obtained from Pyramidal QDs of different designs from the one already reported in Juska et al. (Nat. Phot. 7, 527, 2013). Moreover, some of the limitations for a higher density of entangled photon emitters are addressed. Among these issues are (1) a remaining small fine-structure splitting and (2) an effective QD charging under non-resonant excitation conditions, which strongly reduce the number of useful biexciton-exciton recombination events. A possible solution of the charging problem is investigated exploiting a dual-wavelength excitation technique, which allows a gradual QD charge tuning from strongly negative to positive and, eventually, efficient detection of entangled photons from QDs, which would be otherwise ineffective under a single-wavelength (non-resonant) excitation.
△ Less
Submitted 13 February, 2015;
originally announced February 2015.
-
Complex optical signatures from quantum dot nanostructures and behavior in inverted pyramidal recesses
Authors:
G. Juska,
V. Dimastrodonato,
L. O. Mereni,
T. H. Chung,
A. Gocalinska,
E. Pelucchi,
B. Van Hattem,
M. Ediger,
P. Corfdir
Abstract:
A study of previously overlooked structural and optical properties of InGaAs heterostructures grown on (111)B oriented GaAs substrates patterned with inverted 7.5 um pitch pyramidal recesses is presented. First, the composition of the confinement barrier material (GaAs in this work) and its growth temperature are shown as some of the key parameters that determine the main quantum dot properties, i…
▽ More
A study of previously overlooked structural and optical properties of InGaAs heterostructures grown on (111)B oriented GaAs substrates patterned with inverted 7.5 um pitch pyramidal recesses is presented. First, the composition of the confinement barrier material (GaAs in this work) and its growth temperature are shown as some of the key parameters that determine the main quantum dot properties, including nontrivial emission energy dependence, excitonic pattern and unusual photoluminescence energetic ordering of the InGaAs ensemble nanostructures. Secondly, the formation of a formerly unidentified type of InGaAs nanostructures - three corner quantum dots - is demonstrated in our structures next to the well-known ones (a quantum dot and three lateral quantum wires and quantum wells). The findings show the complexity of the pyramidal quantum dot system which strongly depends on the sample design and which should be considered when selecting highly symmetric (central) quantum dots in newly designed experimental projects.
△ Less
Submitted 2 July, 2014;
originally announced July 2014.
-
Unusual nanostructures of "lattice matched" InP on AlInAs
Authors:
A. Gocalinska,
M. Manganaro,
G. Juska,
V. Dimastrodonato,
K. Thomas,
B. A. Joyce,
J. Zhang,
D. D. Vvedensky,
E. Pelucchi
Abstract:
We show that the morphology of the initial monolayers of InP on Al0.48In0.52As grown by metalorganic vapor-phase epitaxy does not follow the expected layer-by-layer growth mode of lattice-matched systems, but instead develops a number of low-dimensional structures, e.g., quantum dots and wires. We discuss how the macroscopically strain-free heteroepitaxy might be strongly affected by local phase s…
▽ More
We show that the morphology of the initial monolayers of InP on Al0.48In0.52As grown by metalorganic vapor-phase epitaxy does not follow the expected layer-by-layer growth mode of lattice-matched systems, but instead develops a number of low-dimensional structures, e.g., quantum dots and wires. We discuss how the macroscopically strain-free heteroepitaxy might be strongly affected by local phase separation/alloying-induced strain and that the preferred aggregation of adatom species on the substrate surface and reduced wettability of InP on AlInAs surfaces might be the cause of the unusual (step) organization and morphology
△ Less
Submitted 10 April, 2014;
originally announced April 2014.
-
Towards quantum dot arrays of entangled photon emitters
Authors:
Gediminas Juska,
Valeria Dimastrodonato,
Lorenzo O. Mereni,
Agnieszka Gocalinska,
Emanuele Pelucchi
Abstract:
We show that with a new family of pyramidal site-controlled InGaAsN quantum dots it is possible to obtain areas containing as much as 15% of polarization-entangled photon emitters - a major improvement if compared to the small fraction achievable by other quantum dot systems. Entanglement is attested by a two-photon polarization state density matrix and the parameters obtained from it. Emitters sh…
▽ More
We show that with a new family of pyramidal site-controlled InGaAsN quantum dots it is possible to obtain areas containing as much as 15% of polarization-entangled photon emitters - a major improvement if compared to the small fraction achievable by other quantum dot systems. Entanglement is attested by a two-photon polarization state density matrix and the parameters obtained from it. Emitters showing fidelities up to 0.721+-0.043 were found.
△ Less
Submitted 7 February, 2014;
originally announced February 2014.
-
Transient and self-limited nanostructures on patterned surfaces
Authors:
V. Dimastrodonato,
E. Pelucchi,
P. A. Zestanakis,
D. D. Vvedensky
Abstract:
Site-controlled quantum dots formed during the deposition of (Al)GaAs layers by metalorganic vapor-phase epitaxy on GaAs(111)B substrates patterned with inverted pyramids result in geometric and compositional self-ordering along the vertical axis of the template. We describe a theoretical scheme that reproduces the experimentally-observed time-dependent behavior of this process, including the evol…
▽ More
Site-controlled quantum dots formed during the deposition of (Al)GaAs layers by metalorganic vapor-phase epitaxy on GaAs(111)B substrates patterned with inverted pyramids result in geometric and compositional self-ordering along the vertical axis of the template. We describe a theoretical scheme that reproduces the experimentally-observed time-dependent behavior of this process, including the evolution of the recess and the increase of Ga incorporation along the base of the template to stationary values determined by alloy composition and other growth parameters. Our work clarifies the interplay between kinetics and geometry for the development of self-ordered nanostructures on patterned surfaces, which is essential for the reliable on-demand design of confined systems for applications to quantum optics.
△ Less
Submitted 10 June, 2013;
originally announced June 2013.
-
Semiconductor nanostructures engineering: Pyramidal quantum dots
Authors:
E. Pelucchi,
V. Dimastrodonato,
L. O. Mereni,
G. Juska,
A. Gocalinska
Abstract:
Pyramidal quantum dots (QDs) grown in inverted recesses have demonstrated over the years an extraordinary uniformity, high spectral purity and strong design versatility. We discuss recent results, also in view of the Stranski-Krastanow competition and give evidence for strong perspectives in quantum information applications for this system. We examine the possibility of generating entangled and in…
▽ More
Pyramidal quantum dots (QDs) grown in inverted recesses have demonstrated over the years an extraordinary uniformity, high spectral purity and strong design versatility. We discuss recent results, also in view of the Stranski-Krastanow competition and give evidence for strong perspectives in quantum information applications for this system. We examine the possibility of generating entangled and indistinguishable photons, together with the need for the implementation of a, regrettably still missing, strategy for electrical control.
△ Less
Submitted 25 April, 2012;
originally announced April 2012.
-
Wettability and "petal effect" of GaAs native oxides
Authors:
A. Gocalinska,
K. Gradkowski,
V. Dimastrodonato,
L. O. Mereni,
G. Juska,
G. Huyet,
E. Pelucchi
Abstract:
We discuss unreported transitions of oxidized GaAs surfaces between (super)hydrophilic and hydrophobic states when stored in ambient conditions. Contact angles higher than 90deg and high adhesive force were observed for several air-aged epitaxial samples grown under different conditions as well as on epi-ready wafers. Regardless of the morphologies of the surface, superhydrophilicity of oxygen-pla…
▽ More
We discuss unreported transitions of oxidized GaAs surfaces between (super)hydrophilic and hydrophobic states when stored in ambient conditions. Contact angles higher than 90deg and high adhesive force were observed for several air-aged epitaxial samples grown under different conditions as well as on epi-ready wafers. Regardless of the morphologies of the surface, superhydrophilicity of oxygen-plasma treated samples was observed, an effect disappearing with storage time. Reproducible hydrophobicity was likewise observed, as expected, after standard HCl surface etching. The relation between surface oxides and hydrophobic/hydrophilic behavior is discussed.
△ Less
Submitted 24 August, 2011;
originally announced August 2011.
-
Decomposition, diffusion, and growth rate anisotropies in self-limited profiles during metalorganic vapor-phase epitaxy of seeded nanostructures
Authors:
E. Pelucchi,
V. Dimastrodonato,
A. Rudra,
K. Leifer,
E. Kapon,
L. Bethke,
P. Zestanakis,
D. D. Vvedensky
Abstract:
We present a model for the interplay between the fundamental phenomena responsible for the formation of nanostructures by metalorganic vapour phase epitaxy on patterned (001)/(111)B GaAs substrates. Experiments have demonstrated that V-groove quantum wires and pyramidal quantum dots form as a consequence of a self-limiting profile that develops, respectively, at the bottom of V-grooves and inverte…
▽ More
We present a model for the interplay between the fundamental phenomena responsible for the formation of nanostructures by metalorganic vapour phase epitaxy on patterned (001)/(111)B GaAs substrates. Experiments have demonstrated that V-groove quantum wires and pyramidal quantum dots form as a consequence of a self-limiting profile that develops, respectively, at the bottom of V-grooves and inverted pyramids. Our model is based on a system of reaction-diffusion equations, one for each crystallographic facet that defines the pattern, and include the group III precursors, their decomposition and diffusion kinetics (for which we discuss the experimental evidence), and the subsequent diffusion and incorporation kinetics of the group-III atoms released by the precursors. This approach can be applied to any facet configuration, including pyramidal quantum dots, but we focus on the particular case of V-groove templates and offer an explanation for the self-limited profile and the Ga segregation observed in the V-groove. The explicit inclusion of the precursor decomposition kinetics and the diffusion of the atomic species revises and generalizes the earlier work of Basiol et al. [Phys. Rev. Lett. 81, 2962 (1998); Phys. Rev. B 65, 205306 (2002)] and is shown to be essential for obtaining a complete description of self-limiting growth. The solution of the system of equations yields spatially resolved adatom concentrations, from which average facet growth rates are calculated. This provides the basis for determining the conditions that yield selflimiting growth. The foregoing scenario, previously used to account for the growth modes of vicinal GaAs(001) during MOVPE and the step-edge profiles on the ridges of vicinal surfaces patterned with V-grooves, can be used to describe the morphological evolution of any template composed of distinct facets.
△ Less
Submitted 16 August, 2011;
originally announced August 2011.
-
AlGaAs/GaAs/AlGaAs quantum wells as a sensitive tool for the MOVPE reactor environment
Authors:
V. Dimastrodonato,
L. O. Mereni,
R. J. Young,
E. Pelucchi
Abstract:
We present in this work a simple Quantum Well (QW) structure consisting of GaAs wells with AlGaAs barriers as a probe for measuring the performance of arsine purifiers within a MetalOrganic Vapour Phase Epitaxy system. Comparisons between two different commercially available purifiers are based on the analysis of low temperature photoluminescence emission spectra from thick QWs, grown on GaAs subs…
▽ More
We present in this work a simple Quantum Well (QW) structure consisting of GaAs wells with AlGaAs barriers as a probe for measuring the performance of arsine purifiers within a MetalOrganic Vapour Phase Epitaxy system. Comparisons between two different commercially available purifiers are based on the analysis of low temperature photoluminescence emission spectra from thick QWs, grown on GaAs substrates misoriented slightly from (100). Neutral excitons emitted from these structures show extremely narrow linewidths, comparable to those which can be obtained by Molecular Beam Epitaxy in an ultra-high vacuum environment, suggesting that purifications well below the 1ppb level are needed to achieve high quality quantum well growth.
△ Less
Submitted 16 August, 2011;
originally announced August 2011.
-
Impact of Nitrogen incorporation on pseudomorphic site-controlled quantum dots grown by Metalorganic Vapour Phase Epitaxy
Authors:
V. Dimastrodonato,
L. O. Mereni,
G. Juska,
E. Pelucchi
Abstract:
We report on some surprising optical properties of diluted nitride InGaAs_(1-y)N_y /GaAs (y<<1) pyramidal site-controlled quantum dots, grown by metalorganic vapor phase epitaxy on patterned GaAs (111)B substrates. Microphotoluminescence characterizations showed antibinding exciton/ biexciton behavior, a spread of exciton lifetimes in an otherwise very uniform sample, with unexpected long neutral…
▽ More
We report on some surprising optical properties of diluted nitride InGaAs_(1-y)N_y /GaAs (y<<1) pyramidal site-controlled quantum dots, grown by metalorganic vapor phase epitaxy on patterned GaAs (111)B substrates. Microphotoluminescence characterizations showed antibinding exciton/ biexciton behavior, a spread of exciton lifetimes in an otherwise very uniform sample, with unexpected long neutral exciton lifetimes (up to 7 ns) and a nearly zero fine structure splitting on a majority of dots.
△ Less
Submitted 16 August, 2011;
originally announced August 2011.
-
Relevance of the purity level in a MetalOrganic Vapour Phase Epitaxy reactor environment for the growth of high quality pyramidal sitecontrolled Quantum Dots
Authors:
Valeria Dimastrodonato,
Lorenzo O. Mereni,
Robert J. Young,
Emanuele Pelucchi
Abstract:
We report in this work on the spectral purity of pyramidal site-controlled InGaAs/AlGaAs Quantum Dots grown by metalorganic vapour phase epitaxy on(111)B oriented GaAs substrates. Extremely sharp emission peaks were found, showing linewidths surprisingly narrow (~27μeV) and comparable to those which can be obtained by Molecular Beam Epitaxy in an ultra-high vacuum environment. A careful reactor ha…
▽ More
We report in this work on the spectral purity of pyramidal site-controlled InGaAs/AlGaAs Quantum Dots grown by metalorganic vapour phase epitaxy on(111)B oriented GaAs substrates. Extremely sharp emission peaks were found, showing linewidths surprisingly narrow (~27μeV) and comparable to those which can be obtained by Molecular Beam Epitaxy in an ultra-high vacuum environment. A careful reactor handling is regarded as a crucial step toward the fabrication of high optical quality systems.
△ Less
Submitted 5 April, 2011; v1 submitted 4 April, 2011;
originally announced April 2011.
-
Low-angle misorientation dependence of the optical properties of InGaAs/InAlAs quantum wells
Authors:
Robert J. Young,
Lorenzo O. Mereni,
Nikolay Petkov,
Gabrielle R. Knight,
Valeria Dimastrodonato,
Paul K. Hurley,
Greg Hughes,
Emanuele Pelucchi
Abstract:
We investigate the dependence of the low-temperature photoluminescence linewidths from InP-lattice-matched InGaAs/InAlAs quantum wells on the low-angle misorientation from the (100) surface of the host InP substrate. Quantum wells were grown on InP substrates misorientated by 0, 0.2, 0.4 and 0.6 degrees; 0.4 degrees was found to consistently result in the narrowest peaks, with the optimal spectral…
▽ More
We investigate the dependence of the low-temperature photoluminescence linewidths from InP-lattice-matched InGaAs/InAlAs quantum wells on the low-angle misorientation from the (100) surface of the host InP substrate. Quantum wells were grown on InP substrates misorientated by 0, 0.2, 0.4 and 0.6 degrees; 0.4 degrees was found to consistently result in the narrowest peaks, with the optimal spectral purity of ~4.25 meV found from a 15nm quantum well. The width of the emission from the 15nm quantum well was used to optimize the growth parameters. Thick layers of Si-doped InGaAs were then grown and found to have bulk, low temperature (77 K), electron mobilities up to μ~ 3.5 x 10^4 cm2/Vs with an electron concentration of ~1 x 10^16.
△ Less
Submitted 8 April, 2010;
originally announced April 2010.
-
A novel site-controlled quantum dot system with high uniformity and narrow excitonic emission
Authors:
L. O. Mereni,
V. Dimastrodonato,
R. J. Young,
E. Pelucchi
Abstract:
We report on the optical properties of a newly developed site-controlled InGaAs Dots in GaAs barriers grown in pre-patterned pyramidal recesses by metalorganic vapour phase epitaxy. The inhomogeneous broadening of excitonic emission from an ensemble of quantum dots is found to be extremely narrow, with a standard deviation of 1.19 meV. A dramatic improvement in the spectral purity of emission li…
▽ More
We report on the optical properties of a newly developed site-controlled InGaAs Dots in GaAs barriers grown in pre-patterned pyramidal recesses by metalorganic vapour phase epitaxy. The inhomogeneous broadening of excitonic emission from an ensemble of quantum dots is found to be extremely narrow, with a standard deviation of 1.19 meV. A dramatic improvement in the spectral purity of emission lines from individual dots is also reported (18-30 ueV) when compared to the state-of-the-art for site controlled quantum dots.
△ Less
Submitted 8 January, 2010;
originally announced January 2010.
-
A site-controlled quantum dot system offering both high uniformity and spectral purity
Authors:
L. O. Mereni,
V. Dimastrodonato,
R. J. Young,
E. Pelucchi
Abstract:
In this paper we report on the optical properties of site controlled InGaAs dots with GaAs barriers grown in pyramidal recesses by metalorganic vapour phase epitaxy. The inhomogeneous broadening of excitonic emission from an ensemble of quantum dots is found to be unusually narrow, with a standard deviation of 1.19 meV, and spectral purity of emission lines from individual dots is found to be ve…
▽ More
In this paper we report on the optical properties of site controlled InGaAs dots with GaAs barriers grown in pyramidal recesses by metalorganic vapour phase epitaxy. The inhomogeneous broadening of excitonic emission from an ensemble of quantum dots is found to be unusually narrow, with a standard deviation of 1.19 meV, and spectral purity of emission lines from individual dots is found to be very high (18-30 ueV), in contrast with other site-controlled systems.
△ Less
Submitted 22 June, 2009;
originally announced June 2009.
