-
Strain dependent viscous response describes the mechanics of cohesionless soft granular materials
Authors:
Chandan Shakya,
Luca Placidi,
Anil Misra,
Lars Kool,
Anke Lindner,
Jasper van der Gucht,
Joshua A. Dijksman
Abstract:
Granular materials are ubiquitous in nature and are used extensively in daily life and in industry. The modeling of these materials remains challenging; therefore, finding models with acceptable predictive accuracy that at the same time also reflect the complexity of the granular dynamics is a central research theme in the field. Soft particle packings present additional modeling challenges, as it…
▽ More
Granular materials are ubiquitous in nature and are used extensively in daily life and in industry. The modeling of these materials remains challenging; therefore, finding models with acceptable predictive accuracy that at the same time also reflect the complexity of the granular dynamics is a central research theme in the field. Soft particle packings present additional modeling challenges, as it has become clear that soft particles also have particle-level relaxation timescales that affect the packing behavior. We construct a simple one-dimensional, one-timescale model that replicates much of the essence of compressed hydrogel packing mechanics. We verify the model performance against both 3D and 2D packings of hydrogel particles, under both controlled strain and stress deformation conditions. We find that the modification of a Standard Linear Solid model with a strain dependent prefactor for the relaxation captures the time-history and rate dependence, as well as the necessary absence of cohesion effectively. We also indicate some directions of future improvement of the modeling.
△ Less
Submitted 10 June, 2025;
originally announced June 2025.
-
Palatable pellets -- a fundamental framework to produce sustainable pellets via extrusion
Authors:
Richard T. Benders,
Joshua A. Dijksman,
Thomas M. M. Bastiaansen,
Raoul Fix,
Jasper van der Gucht,
Menno Thomas
Abstract:
In pellet manufacturing various ingredients in powder or particle form are pressed together into a dense product, a pellet, with better nutritional, calorific, and handling properties than the individual input ingredients themselves. For this reason, pellet manufacturing is applied to up-convert industrial co-products from various sectors like agriculture, forestry, human food, or bio-energy produ…
▽ More
In pellet manufacturing various ingredients in powder or particle form are pressed together into a dense product, a pellet, with better nutritional, calorific, and handling properties than the individual input ingredients themselves. For this reason, pellet manufacturing is applied to up-convert industrial co-products from various sectors like agriculture, forestry, human food, or bio-energy production, to valorize their waste-streams into more valuable products. However, processing such diverse ingredient streams presents an industrial challenge and raises the important scientific question: "Under which process conditions do loose pellet ingredients bind together to form a mechanically rigid and durable pellet?" In this work we provide new answers to this old research question by determining the causal relationships between processing parameters and physical pellet quality. Systematic pelleting experiments reveal that the interplay of typical process parameters such as steam conditioning temperature, production rate, and die geometry, can be understood in an overarching framework of process interactions. We introduce the concept of the "stickiness temperature," $\mathrm{T^*}$, marking the onset of critical enthalpic reactions necessary for pellet agglomeration, the boundary condition for bond formation within a pellet. Our framework demonstrates how $T^*$ is achieved through a combination of steam conditioning and friction, and how these conditions can be controlled by adjusting process parameters. Our findings underscore the significance of pellet temperature in conjunction with die residence time, for optimizing physical pellet quality while reducing energy consumption per kilogram of product. Validating our results in a trial and leveraging existing literature data, our framework provides handles to intelligently enhance the efficiency and sustainability of pelleting processes.
△ Less
Submitted 7 April, 2025;
originally announced April 2025.
-
Phase segregation lubricates paste extrusion
Authors:
Richard T. Benders,
Menno Thomas,
Thomas M. M. Bastiaansen,
Raoul Fix,
Mario Scheel,
Guido Bosch,
Sonja de Vries,
Jasper van der Gucht,
Joshua A. Dijksman
Abstract:
Extrusion is a critical process in the manufacturing of various organic materials, including animal feed, human food, pharmaceuticals, and biomass for bioenergy. During extrusion, a dense particle-fluid mixture, or paste, is pushed through a narrow channel under high pressure. Despite its widespread use, many questions remain about how particle-fluid interactions and frictional forces at the wall…
▽ More
Extrusion is a critical process in the manufacturing of various organic materials, including animal feed, human food, pharmaceuticals, and biomass for bioenergy. During extrusion, a dense particle-fluid mixture, or paste, is pushed through a narrow channel under high pressure. Despite its widespread use, many questions remain about how particle-fluid interactions and frictional forces at the wall influence high-pressure paste flow, particularly whether laboratory-scale findings translate to more complex industrial settings. Here, we quantify for the first time how a micrometer thin fluid lubrication layer emerges from particle-fluid interactions during the extrusion of organic biomass, controlling friction at the paste-channel interface. This lubrication layer forms through a pressure-induced phase segregation process and is significantly thinner than the particle size, affecting their contact dynamics, making friction at the interface tunable. Our results reveal how the thickness of the lubrication layer is influenced by paste composition, enhancing our fundamental understanding of phase segregation during industrial extrusion processes and offering potential pathways for reducing energy consumption and product failure in the industrial material production.
△ Less
Submitted 6 October, 2024;
originally announced October 2024.
-
Confinement controls the creep rate in soft granular packings
Authors:
Joshua A. Dijksman,
Tom Mullin
Abstract:
Flow in soft materials encompasses a wide range of viscous, plastic and elastic phenomena which provide challenges to modelling at the microscopic level. To create a controlled flow, we perform falling ball viscometry tests on packings of soft, frictionless hydrogel spheres. Systematic creep flow is found when a controlled driving stress is applied to a sinking sphere embedded in a packing. Here,…
▽ More
Flow in soft materials encompasses a wide range of viscous, plastic and elastic phenomena which provide challenges to modelling at the microscopic level. To create a controlled flow, we perform falling ball viscometry tests on packings of soft, frictionless hydrogel spheres. Systematic creep flow is found when a controlled driving stress is applied to a sinking sphere embedded in a packing. Here, we take the novel approach of applying an additional global confinement stress to the packing using an external load. This has enabled us to identify two distinct creep regimes. When confinement stress is small, the creep rate is independent of the load imposed. For larger confinement stresses, we find that the creep rate is set by the mechanical load acting on the packing. In the latter regime, the creep rate depends exponentially on the imposed stress. We can combine the two regimes via a rescaling onto a master curve, capturing the creep rate over five orders of magnitude. Our results indicate that bulk creep phenomena in these soft materials can be subtly controlled using an external mechanical force.
△ Less
Submitted 8 April, 2024;
originally announced April 2024.
-
Viscoelastic material properties determine contact mechanics of hydrogel spheres
Authors:
Chandan Shakya,
Jasper van der Gucht,
Joshua A. Dijksman
Abstract:
Granular materials are ubiquitous in nature and industry; their mechanical behavior has been of academic and engineering interest for centuries. One of the reasons for their rather complex mechanical behavior is that stresses exerted on a granular material propagate only through contacts between the grains. These contacts can change as the packing evolves. This makes any deformation and mechanical…
▽ More
Granular materials are ubiquitous in nature and industry; their mechanical behavior has been of academic and engineering interest for centuries. One of the reasons for their rather complex mechanical behavior is that stresses exerted on a granular material propagate only through contacts between the grains. These contacts can change as the packing evolves. This makes any deformation and mechanical response from a granular packing a function of the nature of contacts between the grains and the material response of the material the grains are made of. We present a study in which we isolate the role of the grain material in the contact forces acting between two particles sliding past each other. We use hydrogel particles and find that a viscoelastic material model, in which the shear modulus decays with time, coupled with a simple Coulomb friction model captures the experimental results. The results suggest that the particle material evolution itself may play a role in the collective behavior of granular materials.
△ Less
Submitted 24 March, 2024;
originally announced March 2024.
-
Elongated particles discharged with a conveyor belt in a two-dimensional silo
Authors:
Bo Fan,
Iker Zuriguel,
Joshua A. Dijksman,
Jasper van der Gucht,
Tamás Börzsönyi
Abstract:
The flow of elliptical particles out of a 2-dimensional silo when extracted with a conveyor belt is analyzed experimentally. The conveyor belt - placed directly below the silo outlet - reduces the flow rate, increases the size of the stagnant zone, and it has a very strong influence on the relative velocity fluctuations as they strongly increase everywhere in the silo with decreasing belt speed. I…
▽ More
The flow of elliptical particles out of a 2-dimensional silo when extracted with a conveyor belt is analyzed experimentally. The conveyor belt - placed directly below the silo outlet - reduces the flow rate, increases the size of the stagnant zone, and it has a very strong influence on the relative velocity fluctuations as they strongly increase everywhere in the silo with decreasing belt speed. In other words, instead of slower but smooth flow, flow reduction by belt leads to intermittent flow. Interestingly, we show that this intermittency correlates with a strong reduction of the orientational order of the particles at the orifice region. Moreover, we observe that the average orientation of the grains passing through the outlet is modified when they are extracted with the belt, a feature that becomes more evident for large orifices.
△ Less
Submitted 2 November, 2023;
originally announced November 2023.
-
Odd dipole screening in disordered matter
Authors:
Yael Cohen,
Amit Schiller,
Dong Wang,
Joshua Dijksman,
Michael Moshe
Abstract:
Disordered solids, straddling the solid-fluid boundary, lack a comprehensive continuum mechanical description. They exhibit a complex microstructure wherein multiple meta-stable states exist. Deforming disordered solids induces particles rearrangements enabling the system to transition between meta-stable states. A dramatic consequence of these transitions is that quasistatic deformation cycles mo…
▽ More
Disordered solids, straddling the solid-fluid boundary, lack a comprehensive continuum mechanical description. They exhibit a complex microstructure wherein multiple meta-stable states exist. Deforming disordered solids induces particles rearrangements enabling the system to transition between meta-stable states. A dramatic consequence of these transitions is that quasistatic deformation cycles modify the reference state, facilitating the storage and release of mechanical energy. Here we develop a continuum mechanical theory of disordered solids, which accounts for the absence of a reference state and the lack of conserved potential energy. Our theory, which introduces a new modulus describing non-conservative mechanical screening, reduces to classical elasticity in the absence of screening. We analytically derive predictions for the deformation field for various perturbations and geometries. While our theory applies to general disordered solids, we focus on a two-dimensional disordered granular system and predict accurately the non-affine displacement fields observed in experiments for both small and large deformations, along with the observable vanishing shear modulus. The new proposed moduli satisfy universal relations that are independent of the specific experimental realization. Our work thus forms the basis of an entirely new family of continuum descriptions of the mechanics of disordered solids.
△ Less
Submitted 20 April, 2024; v1 submitted 15 October, 2023;
originally announced October 2023.
-
Pressure sensitivity in non-local flow behaviour of dense hydrogel particle suspensions
Authors:
Zohreh Farmani,
Nazanin Ghods,
Harkirat Singh,
Jing Wang,
Ralf Stannarius,
Stefan Radl,
David L. Henann,
Joshua A. Dijksman
Abstract:
Slowly sheared particulate media like sand and suspensions flow heterogeneously as they yield via narrow shear bands where most of the strain is accumulated. Understanding shear band localization from microscopics is still a major challenge. One class of so-called non-local theories identified that the width of the shearing zone should depend on the stress field. We explicitly test this picture by…
▽ More
Slowly sheared particulate media like sand and suspensions flow heterogeneously as they yield via narrow shear bands where most of the strain is accumulated. Understanding shear band localization from microscopics is still a major challenge. One class of so-called non-local theories identified that the width of the shearing zone should depend on the stress field. We explicitly test this picture by using a uniquely stress-sensitive suspension while probing its flow behavior in a classic geometry in which shear bands can be well-tuned: the Split-Bottom Shear Cell (SBSC). The stress-sensitive suspension is composed of mildly polydisperse soft, slippery hydrogel spheres submersed in water. We measure their flow profiles and rheology while controlling the confinement stress via hydrostatic effects and compression. We determine the average angular velocity profiles in the quasi-static flow regime using Magnetic Resonance Imaging based particle image velocimetry (MRI-PIV) and discrete element method (DEM) simulations. We explicitly match a pressure-sensitive non-local granular fluidity (NGF) model to observed flow behavior. We find that shear bands for this type of suspension become extremely broad under the low confining stresses from the almost density-matched fluid particle mixture, while collapsing to a narrow shear zone under finite, externally imposed compression levels. The DEM and NGF results match the observations quantitatively, confirming the conjectured pressure sensitivity for suspensions and its role in NGF. Our results indicate that pressure sensitivity should be part of non-local flow rules to describe slow flows of granular media.
△ Less
Submitted 31 July, 2023;
originally announced August 2023.
-
Magnetic Resonance Imaging study of sheared granular matter
Authors:
Jing Wang,
Zohreh Farmani,
Joshua Dijksman,
Cindy Luebeck,
Oliver Speck,
Ralf Stannarius
Abstract:
We introduce a Magnetic Resonance Imaging technique to study the geometry of shear zones of soft, low-frictional and hard, frictional granular materials and their mixtures. Hydrogel spheres serve as the soft, low-frictional material component, while mustard seeds represent rigid, frictional grains. Some of the hydrogel spheres are doped with CuSO4 salt to serve as tracers. A split-bottom shear cel…
▽ More
We introduce a Magnetic Resonance Imaging technique to study the geometry of shear zones of soft, low-frictional and hard, frictional granular materials and their mixtures. Hydrogel spheres serve as the soft, low-frictional material component, while mustard seeds represent rigid, frictional grains. Some of the hydrogel spheres are doped with CuSO4 salt to serve as tracers. A split-bottom shear cell is sheared stepwise and the shear profiles are determined from the differences of tomograms after successive shear steps, using Particle Imaging Velocimetry.We find that the shear zone geometry differs considerably between soft grains submersed in water and the same material without the embedding fluid.
△ Less
Submitted 28 June, 2022;
originally announced June 2022.
-
Creep control in soft particle packings
Authors:
Joshua A Dijksman,
Tom Mullin
Abstract:
Granular packings display a wealth of mechanical features which are of widespread significance. One of these features is creep: the slow deformation under applied stress. Creep is common for many other amorphous materials such as many metals and polymers. The slow motion of creep is challenging to understand, probe and control. We probe the creep properties of packings of soft spheres with a sinki…
▽ More
Granular packings display a wealth of mechanical features which are of widespread significance. One of these features is creep: the slow deformation under applied stress. Creep is common for many other amorphous materials such as many metals and polymers. The slow motion of creep is challenging to understand, probe and control. We probe the creep properties of packings of soft spheres with a sinking ball viscometer. We find that in our granular packings, creep persists up to large strains and has a power law form, with diffusive dynamics. The creep amplitude is exponentially dependent on both applied stress and the concentration of hydrogel, suggesting that a competition between driving and confinement determines the dynamics. Our results provide insights into the mechanical properties of soft solids and the scaling laws provide a clear benchmark for new theory that explains creep, and provide the tantalizing prospect that creep can be controlled by a boundary stress.
△ Less
Submitted 11 May, 2022;
originally announced May 2022.
-
Darcy-Reynolds forces during intrusion into granular-fluid beds
Authors:
Joshua Strader,
Neil Causley,
Joshua A. Dijksman,
Abram H. Clark
Abstract:
We experimentally study intrusion into fluid-saturated granular beds by a free-falling sphere, varying particle size and fluid viscosity. We test our results against Darcy-Reynolds theory, where the deceleration of the sphere is controlled by Reynolds dilatancy and the Darcy flow resistance. We find the observed intruder dynamics are consistent with Darcy-Reynolds theory for varied particle size.…
▽ More
We experimentally study intrusion into fluid-saturated granular beds by a free-falling sphere, varying particle size and fluid viscosity. We test our results against Darcy-Reynolds theory, where the deceleration of the sphere is controlled by Reynolds dilatancy and the Darcy flow resistance. We find the observed intruder dynamics are consistent with Darcy-Reynolds theory for varied particle size. We also find that our experimental results for varied viscosity are consistent with Darcy-Reynolds theory, but only for a limited range of the viscosity. For large viscosities, observed forces begin to decrease with increasing viscosity, in contrast with the theoretical prediction.
△ Less
Submitted 27 July, 2021;
originally announced July 2021.
-
Non-local effects in the shear banding of a thixotropic yield stress fluid
Authors:
Raquel Serial,
Daniel Bonn,
Thom Huppertz,
Joshua A. Dijksman,
Jasper van der Gucht,
John P. M. van Duynhoven,
Camilla Terenzi
Abstract:
We observe a novel type of shear banding in the rheology of thixotropic yield-stress fluids that is due to the coupling of both non-locality and thixotropy. The latter is known to lead to shear banding even in homogeneous stress fields, but the bands observed in the presence of non-local effects appear different as the shear rate varies continuously over the shear band. Here, we introduce a simple…
▽ More
We observe a novel type of shear banding in the rheology of thixotropic yield-stress fluids that is due to the coupling of both non-locality and thixotropy. The latter is known to lead to shear banding even in homogeneous stress fields, but the bands observed in the presence of non-local effects appear different as the shear rate varies continuously over the shear band. Here, we introduce a simple non-local model for the shear banding (NL-SB), and we implement it for the analysis of micron-scale rheo-MRI velocimetry measurements of a milk microgel suspension in a cone-and-plate geometry. The proposed NL-SB model accurately quantifies the cooperativity length and yields values in the order of the aggregate size in the microgel.
△ Less
Submitted 26 April, 2021;
originally announced April 2021.
-
Spatially correlated rotational dynamics reveals strain dependence in amorphous particle packings
Authors:
Dong Wang,
Nima Nejadsadeghi,
Yan Li,
Shashi Shekhar,
Anil Misra,
Joshua A. Dijksman
Abstract:
Microstructural dynamics in amorphous particle packings is commonly probed by quantifying particle displacements. While rigidity in particle packings emerges when displacement of particles are hindered, it is not obvious how the typically disordered displacement metrics connect to mechanical response. Particle rotations, in contrast, are much less sensitive to confinement effects, while still sens…
▽ More
Microstructural dynamics in amorphous particle packings is commonly probed by quantifying particle displacements. While rigidity in particle packings emerges when displacement of particles are hindered, it is not obvious how the typically disordered displacement metrics connect to mechanical response. Particle rotations, in contrast, are much less sensitive to confinement effects, while still sensitive to the mechanics of the packing. So far, little attention has been paid to connect microscopic rotational motion to mechanics of athermal amorphous packings. We demonstrate through experimental measurements that particle packing mechanics can be directly linked to the rotational motion of even round particles in a sheared packing. Our results show that the diffusive nature of rotational dynamics is highly strain sensitive. Additionally, there is substantial spatial correlation in rotation dynamics that is a function of the particle friction and packing density. Analysis of our measurements reveals that particle rotation dynamics plays an essential role in amorphous material mechanics.
△ Less
Submitted 9 December, 2020;
originally announced December 2020.
-
Viscous-like forces control the impact response of shear-thickening dense suspensions
Authors:
Marc-Andre Brassard,
Neil Causley,
Nasser Krizou,
Joshua A. Dijksman,
Abram H. Clark
Abstract:
We experimentally and theoretically study impacts into dense cornstarch and water suspensions. We vary impact speed as well as intruder size, shape, and mass, and we characterize the resulting dynamics using high-speed video and an onboard accelerometer. We numerically solve previously proposed models, most notably the added-mass model as well as a class of {viscous-like} models. In the {viscous-l…
▽ More
We experimentally and theoretically study impacts into dense cornstarch and water suspensions. We vary impact speed as well as intruder size, shape, and mass, and we characterize the resulting dynamics using high-speed video and an onboard accelerometer. We numerically solve previously proposed models, most notably the added-mass model as well as a class of {viscous-like} models. In the {viscous-like models}, the intruder dynamics are dominated by {large, viscous-like forces} at the boundary of the jammed front {where large shear rates and accompanying large viscosities are present.} We find that our experimental data are consistent with this class of models and inconsistent with the added mass model. Our results strongly suggest that the added-mass model, which is the dominant model for understanding the dynamics of impact into shear-thickening dense suspensions, should be updated to include these viscous-like forces.
△ Less
Submitted 27 July, 2021; v1 submitted 23 November, 2020;
originally announced November 2020.
-
Direct evidence of stress-induced chain proximity in a macromolecular complex
Authors:
Steven van Kesteren,
Tatiana Nikolaeva,
Henk Van As,
Joshua A. Dijksman
Abstract:
The mechanical properties of many supramolecular materials are often determined by non-covalent interactions that arise from an interplay between chemical composition and molecular microstructural organization. The reversible nature of non-covalent interactions gives supramolecular materials responsive properties that are otherwise difficult to obtain, such as becoming rigid as a response to mecha…
▽ More
The mechanical properties of many supramolecular materials are often determined by non-covalent interactions that arise from an interplay between chemical composition and molecular microstructural organization. The reversible nature of non-covalent interactions gives supramolecular materials responsive properties that are otherwise difficult to obtain, such as becoming rigid as a response to mechanical stress. How exactly non-covalent interactions emerge from microstructure, how they might change in response to applied force or deformation is not understood. Here we combine Nuclear Magnetic Resonance (NMR) and rheology to directly probe the role of chain proximity in polymer complexes. We observe an increase in chain proximity in response to imposed flow, which we hypothesize to originate from enhanced hydrogen bonding. The chain proximity is directly correlated to rod climbing and shear banding. Flow persists only when applied stresses are low, suggesting a stress-induced thickening mechanism. We verify that hydrogen bond disruptors can turn off both the non-trivial flow behavior and the spectroscopic evidence of chain proximity. The combined rheo-NMR approach shows that it is possible to directly observe the molecular origins behind supramolecular mechanics, paving the way for further study into mechano-chemical properties of supramolecular materials.
△ Less
Submitted 18 April, 2020;
originally announced April 2020.
-
Sheared Amorphous Packings Display Two Separate Particle Transport Mechanisms
Authors:
Dong Wang,
Joshua A. Dijksman,
Jonathan Bares,
Jie Ren,
Hu Zheng
Abstract:
Shearing granular materials induces non-affine displacements. Such non-affine displacements have been studied extensively, and are known to correlate with plasticity and other mechanical features of amorphous packings. A well known example is shear transformation zones as captured by the local deviation from affine deformation, $D^2_{min}$, and their relevance to failure and stress fluctuations. W…
▽ More
Shearing granular materials induces non-affine displacements. Such non-affine displacements have been studied extensively, and are known to correlate with plasticity and other mechanical features of amorphous packings. A well known example is shear transformation zones as captured by the local deviation from affine deformation, $D^2_{min}$, and their relevance to failure and stress fluctuations. We analyze sheared frictional athermal disk packings and show that there exists at least one additional mesoscopic transport mechanism that superimposes itself on top of local diffusive motion. We evidence this second transport mechanism in a homogeneous system via a diffusion tensor analysis and show that the trace of the diffusion tensor equals the classic $D^2_{min}$ when this second mesoscopic transport is corrected for. The new transport mechanism is consistently observed over a wide range of volume fractions and even for particles with different friction coefficients and is consistently observed also upon shear reversal, hinting at its relevance for memory effects.
△ Less
Submitted 12 December, 2020; v1 submitted 22 December, 2019;
originally announced December 2019.
-
Transparent Experiments: Releasing Data from Mechanical Tests on Three Dimensional Hydrogel Sphere Packings
Authors:
Jonathan Barés,
Nicolas Brodu,
Hu Zheng,
Joshua A. Dijksman
Abstract:
We describe here experiments on the mechanics of hydrogel particle packings from the Behringer lab, performed between 2012 and 2015. These experiments quantify the evolution of all contact forces inside soft particle packings exposed to compression, shear, and the intrusion of a large intruder. The experimental set-ups and processes are presented and the data are concomitantly published in a repos…
▽ More
We describe here experiments on the mechanics of hydrogel particle packings from the Behringer lab, performed between 2012 and 2015. These experiments quantify the evolution of all contact forces inside soft particle packings exposed to compression, shear, and the intrusion of a large intruder. The experimental set-ups and processes are presented and the data are concomitantly published in a repository.
△ Less
Submitted 22 December, 2019;
originally announced December 2019.
-
Enlightening force chains: a review of photoelasticimetry in granular matter
Authors:
Aghil Abed Zadeh,
Jonathan Barés,
Theodore A. Brzinski,
Karen E. Daniels,
Joshua Dijksman,
Nicolas Docquier,
Henry Everitt,
Jonathan E. Kollmer,
Olivier Lantsoght,
Dong Wang,
Marcel Workamp,
Yiqiu Zhao,
Hu Zheng
Abstract:
A photoelastic material will reveal its internal stresses when observed through polarizing filters. This eye-catching property has enlightened our understanding of granular materials for over half a century, whether in the service of art, education, or scientific research. In this review article in honor of Robert Behringer, we highlight both his pioneering use of the method in physics research, a…
▽ More
A photoelastic material will reveal its internal stresses when observed through polarizing filters. This eye-catching property has enlightened our understanding of granular materials for over half a century, whether in the service of art, education, or scientific research. In this review article in honor of Robert Behringer, we highlight both his pioneering use of the method in physics research, and its reach into the public sphere through museum exhibits and outreach programs. We aim to provide clear protocols for artists, exhibit-designers, educators, and scientists to use in their own endeavors. It is our hope that this will build awareness about the ubiquitous presence of granular matter in our lives, enlighten its puzzling behavior, and promote conversations about its importance in environmental and industrial contexts. To aid in this endeavor, this paper also serves as a front door to a detailed wiki containing open, community-curated guidance on putting these methods into practice.
△ Less
Submitted 28 February, 2019;
originally announced February 2019.
-
Characterizing Granular Networks Using Topological Metrics
Authors:
Joshua A. Dijksman,
Lenka Kovalcinova,
Jie Ren,
Robert P. Behringer,
Miroslav Kramar,
Konstantin Mischaikow,
Lou Kondic
Abstract:
We carry out a direct comparison of experimental and numerical realizations of the exact same granular system as it undergoes shear jamming. We adjust the numerical methods used to optimally represent the experimental settings and outcomes up to microscopic contact force dynamics. Measures presented here range form microscopic, through mesoscopic to system-wide characteristics of the system. Topol…
▽ More
We carry out a direct comparison of experimental and numerical realizations of the exact same granular system as it undergoes shear jamming. We adjust the numerical methods used to optimally represent the experimental settings and outcomes up to microscopic contact force dynamics. Measures presented here range form microscopic, through mesoscopic to system-wide characteristics of the system. Topological properties of the mesoscopic force networks provide a key link between micro and macro scales. We report two main findings: the number of particles in the packing that have at least two contacts is a good predictor for the mechanical state of the system, regardless of strain history and packing density. All measures explored in both experiments and numerics, including stress tensor derived measures and contact numbers depend in a universal manner on the fraction of non-rattler particles, $f_{NR}$. The force network topology also tends to show this universality, yet the shape of the master curve depends much more on the details of the numerical simulations. In particular we show that adding force noise to the numerical data set can significantly alter the topological features in the data. We conclude that both $f_{NR}$ and topological metrics are useful measures to consider when quantifying the state of a granular system.
△ Less
Submitted 9 January, 2018;
originally announced January 2018.
-
Contact tribology also affects the slow flow behavior of granular emulsions
Authors:
Marcel Workamp,
Joshua A. Dijksman
Abstract:
Recent work on suspension flows has shown that contact mechanics plays a role in suspension flow dynamics. The contact mechanics between particulate matter in dispersions should depend sensitively on the composition of the dispersed phase: evidently emulsion droplets interact differently with each other than angular sand particles. We therefore ask: what is the role of contact mechanics in dispers…
▽ More
Recent work on suspension flows has shown that contact mechanics plays a role in suspension flow dynamics. The contact mechanics between particulate matter in dispersions should depend sensitively on the composition of the dispersed phase: evidently emulsion droplets interact differently with each other than angular sand particles. We therefore ask: what is the role of contact mechanics in dispersed media flow? We focus on slow flows, where contacts are long-lasting and hence contact mechanics effects should be most visible. To answer our question, we synthesize soft hydrogel particles with different friction coefficients. By making the particles soft, we can drive them at finite confining pressure at all driving rates. For particles with a low friction coefficient, we obtain a rheology similar to that of an emulsion, yet with an effective friction much larger than expected from their microscopic contact mechanics. Increasing the friction coefficient of the particles, we find a flow instability in the suspension. Particle level flow and fluctuations are also greatly affected by the microscopic friction coefficient of the suspended particles. The specific rheology of our "granular emulsions" provides further evidence that a better understanding of microscopic particle interactions is of broad relevance for dispersed media flows.
△ Less
Submitted 19 October, 2018; v1 submitted 29 September, 2017;
originally announced September 2017.
-
Focus on Imaging Methods in Granular Physics
Authors:
Axelle Amon,
Philip Born,
Karen E. Daniels,
Joshua A. Dijksman,
Kai Huang,
David Parker,
Matthias Schröter,
Ralf Stannarius,
Andreas Wierschem
Abstract:
Granular materials are complex multi-particle ensembles in which macroscopic properties are largely determined by inter-particle interactions between their numerous constituents. In order to understand and to predict their macroscopic physical behavior, it is necessary to analyze the composition and interactions at the level of individual contacts and grains. To do so requires the ability to image…
▽ More
Granular materials are complex multi-particle ensembles in which macroscopic properties are largely determined by inter-particle interactions between their numerous constituents. In order to understand and to predict their macroscopic physical behavior, it is necessary to analyze the composition and interactions at the level of individual contacts and grains. To do so requires the ability to image individual particles and their local configurations to high precision. A variety of competing and complementary imaging techniques have been developed for that task. In this introductory paper accompanying the Focus Issue, we provide an overview of these imaging methods and discuss their advantages and drawbacks, as well as their limits of application.
△ Less
Submitted 7 April, 2017; v1 submitted 7 March, 2017;
originally announced March 2017.
-
Refractive Index Matched Scanning and Detection of Soft Particle
Authors:
Joshua A. Dijksman,
Nicolas Brodu,
R. P. Behringer
Abstract:
We describe here how to apply the three dimensional imaging technique of refrecative index matched scanning to hydrogel spheres. Hydrogels are water based materials with a low refractive index, which allows for index matching with water-based solvent mixtures. We discuss here various experimental techniques required to handle specifically hydrogel spheres as opposed to other transparent materials.…
▽ More
We describe here how to apply the three dimensional imaging technique of refrecative index matched scanning to hydrogel spheres. Hydrogels are water based materials with a low refractive index, which allows for index matching with water-based solvent mixtures. We discuss here various experimental techniques required to handle specifically hydrogel spheres as opposed to other transparent materials. The deformability of hydrogel spheres makes their identification in three dimensional images non-trivial. We will also discuss numerical techniques that can be used in general to detect contacting, non-spherical particles in a three dimensional image. The experimental and numerical techniques presented here give experimental access to the stress tensor of a packing of deformed particles.
△ Less
Submitted 8 March, 2017;
originally announced March 2017.
-
MC-DEM: a novel simulation scheme for modeling dense granular media
Authors:
Nicolas Brodu,
Joshua A. Dijksman,
Robert P. Behringer
Abstract:
This article presents a new force model for performing quantitative simulations of dense granular materials. Interactions between multiple contacts (MC) on the same grain are explicitly taken into account. Our readily applicable method retains all the advantages of discrete element method (DEM) simulations and does not require the use of costly finite element methods. The new model closely reprodu…
▽ More
This article presents a new force model for performing quantitative simulations of dense granular materials. Interactions between multiple contacts (MC) on the same grain are explicitly taken into account. Our readily applicable method retains all the advantages of discrete element method (DEM) simulations and does not require the use of costly finite element methods. The new model closely reproduces our recent experimental measurements, including contact force distributions in full 3D, at all compression levels up to the experimental maximum limit of 13\%. Comparisons with traditional non-deformable spheres approach are provided, as well as with alternative models for interactions between multiple contacts. The success of our model compared to these alternatives demonstrates that interactions between multiple contacts on each grain must be included for dense granular packings.
△ Less
Submitted 23 October, 2014;
originally announced October 2014.
-
Spanning the Scales of Granular Materials: Microscopic Force Imaging
Authors:
Nicolas Brodu,
Joshua A. Dijksman,
Robert P. Behringer
Abstract:
If you walk on sand, it supports your weight. How do the disordered forces between particles in sand organize, to keep you from sinking? This simple question is surprisingly difficult to answer experimentally: measuring forces in three dimensions, between deeply buried grains, is challenging. We describe here experiments in which we have succeeded in measuring forces inside a granular packing subj…
▽ More
If you walk on sand, it supports your weight. How do the disordered forces between particles in sand organize, to keep you from sinking? This simple question is surprisingly difficult to answer experimentally: measuring forces in three dimensions, between deeply buried grains, is challenging. We describe here experiments in which we have succeeded in measuring forces inside a granular packing subject to controlled deformations. We connect the measured micro-scale forces to the macro-scale packing force response with an averaging, mean field calculation. This calculation explains how the combination of packing structure and contact deformations produce the unexpected mechanical response of the packing, and reveals a surprising microscopic particle deformation enhancement mechanism.
△ Less
Submitted 11 August, 2014;
originally announced August 2014.
-
Shear Jamming in Granular Experiments without Basal Friction
Authors:
Hu Zheng,
Joshua A. Dijksman,
Robert P. Behringer
Abstract:
Jammed states of frictional granular systems can be induced by shear strain at densities below the isostatic jamming density ($φ_c$). It remains unclear, however, how much friction affects this so-called shear-jamming. Friction appears in two ways in this type of experiment: friction between particles, and friction between particles and the base on which they rest. Here, we study how particle-bott…
▽ More
Jammed states of frictional granular systems can be induced by shear strain at densities below the isostatic jamming density ($φ_c$). It remains unclear, however, how much friction affects this so-called shear-jamming. Friction appears in two ways in this type of experiment: friction between particles, and friction between particles and the base on which they rest. Here, we study how particle-bottom friction, or basal friction, affects shear jamming in quasi-two dimensional experiments. In order to study this issue experimentally, we apply simple shear to a disordered packing of photoelastic disks. We can tune the basal friction of the particles by immersing the particles in a density matched liquid, thus removing the normal force, hence the friction, between the particles and base. We record the overall shear stress, and particle motion, and the photoelastic response of the particles. We compare the shear response of dry and immersed samples, which enables us to determine how basal friction affects shear jamming. Our findings indicate that changing the basal friction shifts the point of shear jamming, but it does not change the basic phenomenon of shear jamming.
△ Less
Submitted 8 August, 2014; v1 submitted 29 April, 2014;
originally announced April 2014.
-
Rheology of Weakly Vibrated Granular Media
Authors:
Geert H. Wortel,
Joshua A. Dijksman,
Martin van Hecke
Abstract:
We probe the rheology of weakly vibrated granular flows as function of flow rate, vibration strength and pressure by performing experiments in a vertically vibrated split-bottom shear cell. For slow flows, we establish the existence of a novel vibration dominated granular flow regime, where the driving stresses smoothly vanish as the driving rate is diminished. We distinguish three qualitatively d…
▽ More
We probe the rheology of weakly vibrated granular flows as function of flow rate, vibration strength and pressure by performing experiments in a vertically vibrated split-bottom shear cell. For slow flows, we establish the existence of a novel vibration dominated granular flow regime, where the driving stresses smoothly vanish as the driving rate is diminished. We distinguish three qualitatively different vibration dominated rheologies, most strikingly a regime where the shear stresses no longer are proportional to the pressure.
△ Less
Submitted 2 December, 2013;
originally announced December 2013.
-
Drop impact of shear thickening liquids
Authors:
Francois Boyer,
Jacco H. Snoeijer,
J. Frits Dijksman,
Detlef Lohse
Abstract:
The impact of drops of concentrated non-Brownian suspensions (cornstarch and polystyrene spheres) onto a solid surface is investigated experimentally. The spreading dynamics and maxi- mal deformation of the droplet of such shear thickening liquids are found to be markedly different from the impact of Newtonian drops. A particularly striking observation is that the maximal de- formation is independ…
▽ More
The impact of drops of concentrated non-Brownian suspensions (cornstarch and polystyrene spheres) onto a solid surface is investigated experimentally. The spreading dynamics and maxi- mal deformation of the droplet of such shear thickening liquids are found to be markedly different from the impact of Newtonian drops. A particularly striking observation is that the maximal de- formation is independent of the drop velocity and that the deformation suddenly stops during the impact phase. Both observations are due to the shear-thickening rheology of the suspensions, as is theoretically explained from a balance between the kinetic energy and the viscously-dissipated en- ergy, from which we establish a scaling relation between drop maximal deformation and rheological parameters of concentrated suspensions.
△ Less
Submitted 14 June, 2013;
originally announced June 2013.
-
Rheology of sedimenting particle pastes
Authors:
Abdoulaye Fall,
Henri de Cagny,
Daniel Bonn,
Guillaume Ovarlez,
Elie Wandersman,
Joshua A. Dijksman,
Martin van Hecke
Abstract:
We study the local and global rheology of non-Brownian suspensions in a solvent that is not density-matched, leading to either creaming or sedimentation of the particles. Both local and global measurements show that the incomplete density matching leads to the appearance of a critical shear rate above which the suspension is homogenized by the flow, and below which sedimentation or creaming happen…
▽ More
We study the local and global rheology of non-Brownian suspensions in a solvent that is not density-matched, leading to either creaming or sedimentation of the particles. Both local and global measurements show that the incomplete density matching leads to the appearance of a critical shear rate above which the suspension is homogenized by the flow, and below which sedimentation or creaming happens. We show that the value of the critical shear rate and its dependence on the experimental parameters are governed by a simple competition between the viscous and gravitational forces, and present a simple scaling model that agrees with the experimental results from different types of experiments (local and global) in different setups and systems.
△ Less
Submitted 20 September, 2012;
originally announced September 2012.
-
Particle Diffusion in Slow Granular Bulk Flows
Authors:
Elie Wandersman,
Joshua A. Dijksman,
Martin van Hecke
Abstract:
We probe the diffusive motion of particles in slowly sheared three dimensional granular suspensions. For sufficiently large strains, the particle dynamics exhibits diffusive Gaussian statistics, with the diffusivity proportional to the local strain rate - consistent with a local, quasi static picture. Surprisingly, the diffusivity is also inversely proportional to the depth of the particles within…
▽ More
We probe the diffusive motion of particles in slowly sheared three dimensional granular suspensions. For sufficiently large strains, the particle dynamics exhibits diffusive Gaussian statistics, with the diffusivity proportional to the local strain rate - consistent with a local, quasi static picture. Surprisingly, the diffusivity is also inversely proportional to the depth of the particles within the flow - at the free surface, diffusivity is thus ill defined. We find that the crossover to Gaussian displacement statistics is governed by the same depth dependence, evidencing a non-trivial strain scale in three dimensional granular flows.
△ Less
Submitted 30 August, 2012;
originally announced August 2012.
-
Reynolds Pressure and Relaxation in a Sheared Granular System
Authors:
Jie Ren,
Joshua A. Dijksman,
Robert P. Behringer
Abstract:
We describe experiments that probe the evolution of shear jammed states, occurring for packing fractions $φ_S \leq φ\leq φ_J$, for frictional granular disks, where above $φ_J$ there are no stress-free static states. We use a novel shear apparatus that avoids the formation of inhomogeneities known as shear bands. This fixed $φ$ system exhibits coupling between the shear strain, $γ$, and the pressur…
▽ More
We describe experiments that probe the evolution of shear jammed states, occurring for packing fractions $φ_S \leq φ\leq φ_J$, for frictional granular disks, where above $φ_J$ there are no stress-free static states. We use a novel shear apparatus that avoids the formation of inhomogeneities known as shear bands. This fixed $φ$ system exhibits coupling between the shear strain, $γ$, and the pressure, $P$, which we characterize by the `Reynolds pressure', and a `Reynolds coefficient', $R(φ) = (\partial ^2 P/\partial γ^2)/2$. $R$ depends only on $φ$, and diverges as $R \sim (φ_c - φ)^α$, where $φ_c \simeq φ_J$, and $α\simeq -3.3$. Under cyclic shear, this system evolves logarithmically slowly towards limit cycle dynamics, which we characterize in terms of pressure relaxation at cycle $n$: $ΔP \simeq -β\ln(n/n_0)$. $β$ depends only on the shear cycle amplitude, suggesting an activated process where $β$ plays a temperature-like role.
△ Less
Submitted 10 January, 2013; v1 submitted 30 July, 2012;
originally announced July 2012.
-
Jamming, Yielding and Rheology of Weakly Vibrated Granular Media
Authors:
J. A. Dijksman,
G. H. Wortel,
L. T. H. van Dellen,
O. Dauchot,
M. van Hecke
Abstract:
We establish that the rheological curve of dry granular media is non-monotonic, both in the presence and absence of external mechanical agitations. In the presence of weak vibrations, the non-monotonic flow curves govern a hysteretic transition between slow but steady and fast, inertial flows. In the absence of vibrations, the non-monotonic flow curve governs the yielding behavior of granular medi…
▽ More
We establish that the rheological curve of dry granular media is non-monotonic, both in the presence and absence of external mechanical agitations. In the presence of weak vibrations, the non-monotonic flow curves govern a hysteretic transition between slow but steady and fast, inertial flows. In the absence of vibrations, the non-monotonic flow curve governs the yielding behavior of granular media. Finally, we show that non-monotonic flow curves can be seen in at least two different flow geometries and for several granular materials.
△ Less
Submitted 17 July, 2011; v1 submitted 14 June, 2011;
originally announced June 2011.
-
From Frictional to Viscous Behavior: Three Dimensional Imaging and Rheology of Gravitational Suspensions
Authors:
Joshua A. Dijksman,
Elie Wandersman,
Steven Slotterback,
Christian R. Berardi,
William Derek Updegraff,
Martin van Hecke,
Wolfgang Losert
Abstract:
We probe the three dimensional flow structure and rheology of gravitational (non-density matched) suspensions for a range of driving rates in a split-bottom geometry. We establish that for sufficiently slow flows, the suspension flows as if it were a dry granular medium, and confirm recent theoretical modeling on the rheology of split-bottom flows. For faster driving, the flow behavior is shown to…
▽ More
We probe the three dimensional flow structure and rheology of gravitational (non-density matched) suspensions for a range of driving rates in a split-bottom geometry. We establish that for sufficiently slow flows, the suspension flows as if it were a dry granular medium, and confirm recent theoretical modeling on the rheology of split-bottom flows. For faster driving, the flow behavior is shown to be consistent with the rheological behavior predicted by the recently developed "inertial number approaches for suspension flows.
△ Less
Submitted 10 December, 2010; v1 submitted 7 April, 2010;
originally announced April 2010.
-
Granular Flows in Split-Bottom Geometries
Authors:
Joshua A. Dijksman,
Martin van Hecke
Abstract:
There is a simple and general experimental protocol to generate slow granular flows that exhibit wide shear zones, qualitatively different from the narrow shear bands that are usually observed in granular materials . The essence is to drive the granular medium not from the sidewalls, but to split the bottom of the container that supports the grains in two parts and slide these parts past each othe…
▽ More
There is a simple and general experimental protocol to generate slow granular flows that exhibit wide shear zones, qualitatively different from the narrow shear bands that are usually observed in granular materials . The essence is to drive the granular medium not from the sidewalls, but to split the bottom of the container that supports the grains in two parts and slide these parts past each other. Here we review the main features of granular flows in such split-bottom geometries.
△ Less
Submitted 29 March, 2010;
originally announced March 2010.
-
The role of tap duration for the steady state density of vibrated granular media
Authors:
J. A. Dijksman,
M. van Hecke
Abstract:
We revisit the problem of compaction of a column of granular matter exposed to discrete taps. We accurately control the vertical motion of the column, which allows us to vary the duration T and the amplitude A of single-cycle sinusoidal taps independently. We find that the density of the material at the reversible branch depends both on A and T. By comparing the densities on the reversible branc…
▽ More
We revisit the problem of compaction of a column of granular matter exposed to discrete taps. We accurately control the vertical motion of the column, which allows us to vary the duration T and the amplitude A of single-cycle sinusoidal taps independently. We find that the density of the material at the reversible branch depends both on A and T. By comparing the densities on the reversible branches obtained for a range of values of T, we find that we can collapse all data when plotted as function of A/T, which scales similar to both the liftoff velocity and the time of flight of the packing. We further show that switching between states obtained for different A and T, but chosen such that their densities on the reversible branches match, does not lead to appreciable hysteresis. We conclude that the appropriate control parameter for sinusoidal tapping is not the peak acceleration Γ\sim A/T^2, as is usually assumed, but rather ΓT \sim A/T.
△ Less
Submitted 6 January, 2010; v1 submitted 31 March, 2009;
originally announced March 2009.