-
Modification of the scattering mechanisms in bilayer graphene in proximity to a molecular thin film probed in the mesoscopic regime
Authors:
Anise Mansour,
Deanna Diaz,
Movindu Kawshan Dissanayake,
Erin Henkhaus,
Jungyoun Cho,
Vinh Tran,
Francisco Ramirez,
Eric Corona-Oceguera,
Joshua Luna,
Kenta Kodama,
Yueyun Chen,
Ho Chan,
Jacob Weber,
Blake Koford,
Patrick Barfield,
Maya Martinez,
Kenji Watanabe,
Takashi Taniguchi,
B. C. Regan,
Matthew Mecklenburg,
Thomas Gredig,
Claudia Ojeda-Aristizabal
Abstract:
Quantum coherent effects can be probed in multilayer graphene through electronic transport measurements at low temperatures. In particular, bilayer graphene is known to be susceptible to quantum interference corrections of the conductivity, presenting weak localization at all electronic densities, and dependent on different scattering mechanisms as well as on the trigonal warping of the electron d…
▽ More
Quantum coherent effects can be probed in multilayer graphene through electronic transport measurements at low temperatures. In particular, bilayer graphene is known to be susceptible to quantum interference corrections of the conductivity, presenting weak localization at all electronic densities, and dependent on different scattering mechanisms as well as on the trigonal warping of the electron dispersion near the K and K' valleys. Proximity effects with a molecular thin film influence these scattering mechanisms, which can be quantified through the known theory of magnetoconductance for bilayer graphene. Here, we present weak localization measurements in a copper-phthalocyanine / bilayer graphene / h-BN heterostructure that suggest an important suppression of trigonal warping effects in bilayer graphene (BLG), restoring the manifestation of the chirality of the charge carriers in the localization properties of BLG. Additionally, we observe a charge transfer of 3.6$\times$10$^{12}$cm$^{-2}$ from the BLG to the molecules, as well as a very small degradation of the mobility of the BLG/h-BN heterostructure upon the deposition of copper phthalocyanine (CuPc). The molecular arrangement of the CuPc thin film is characterized in a control sample through transmission electron microscopy, that we relate to the electronic transport results.
△ Less
Submitted 29 April, 2025;
originally announced April 2025.
-
Surfactants Screen Slide Electrification
Authors:
Xiaomei Li,
Zhongyuan Ni,
Xiaoteng Zhou,
Lisa S. Bauer,
Diego Diaz,
Gabriele Schäfer,
Hans-Jürgen Butt
Abstract:
Water drops spontaneously accumulate charges when they move on hydrophobic dielectric surfaces by slide electrification. On the one hand, slide electrification generates electricity with possible applications on tiny devices. On the other hand, the potential of up to 1 KV generated by slide electrification alters wetting and drop motion. Therefore, it is important to know the factors that affect s…
▽ More
Water drops spontaneously accumulate charges when they move on hydrophobic dielectric surfaces by slide electrification. On the one hand, slide electrification generates electricity with possible applications on tiny devices. On the other hand, the potential of up to 1 KV generated by slide electrification alters wetting and drop motion. Therefore, it is important to know the factors that affect slide electrification. To find out how surfactants affect slide electrification, we measured drop charges of aqueous drops containing cationic CTAB, anionic SDS and neutral C8E3 sliding on different hydrophobic surfaces. The result is: addition of surfactant significantly reduces the spontaneous charging of moving water drops. Based on zeta potential measurements, confocal microscopy of deposited surface-active dyes and drop impact studies, we propose that several factors contribute to this suppression of charge separation: (1) Surfactants tend to lower the contact angles, which reduces charge separation. (2) Surfactant adsorption at the solid-liquid interface can reduce the density of primary ions, particularly for anionic surfactants. (3) Anionic and neutral surfactants are mostly transferred to the liquid-air interface at the rear of the sliding drop, retaining primary ions within the drop. (4) Deposited cationic surfactant directly reduces the charge of the drop.
△ Less
Submitted 1 April, 2025;
originally announced April 2025.
-
Identifying Materials-Level Sources of Performance Variation in Superconducting Transmon Qubits
Authors:
Akshay A. Murthy,
Mustafa Bal,
Michael J. Bedzyk,
Hilal Cansizoglu,
Randall K. Chan,
Venkat Chandrasekhar,
Francesco Crisa,
Amlan Datta,
Yanpei Deng,
Celeo D. Matute Diaz,
Vinayak P. Dravid,
David A. Garcia-Wetten,
Sabrina Garattoni,
Sunil Ghimire,
Dominic P. Goronzy,
Sebastian de Graaf,
Sam Haeuser,
Mark C. Hersam,
Peter Hopkins,
Dieter Isheim,
Kamal Joshi,
Richard Kim,
Saagar Kolachina,
Cameron J. Kopas,
Matthew J. Kramer
, et al. (24 additional authors not shown)
Abstract:
The Superconducting Materials and Systems (SQMS) Center, a DOE National Quantum Information Science Research Center, has conducted a comprehensive and coordinated study using superconducting transmon qubit chips with known performance metrics to identify the underlying materials-level sources of device-to-device performance variation. Following qubit coherence measurements, these qubits of varying…
▽ More
The Superconducting Materials and Systems (SQMS) Center, a DOE National Quantum Information Science Research Center, has conducted a comprehensive and coordinated study using superconducting transmon qubit chips with known performance metrics to identify the underlying materials-level sources of device-to-device performance variation. Following qubit coherence measurements, these qubits of varying base superconducting metals and substrates have been examined with various nondestructive and invasive material characterization techniques at Northwestern University, Ames National Laboratory, and Fermilab as part of a blind study. We find trends in variations of the depth of the etched substrate trench, the thickness of the surface oxide, and the geometry of the sidewall, which when combined, lead to correlations with the T$_1$ lifetime across different devices. In addition, we provide a list of features that varied from device to device, for which the impact on performance requires further studies. Finally, we identify two low-temperature characterization techniques that may potentially serve as proxy tools for qubit measurements. These insights provide materials-oriented solutions to not only reduce performance variations across neighboring devices, but also to engineer and fabricate devices with optimal geometries to achieve performance metrics beyond the state-of-the-art values.
△ Less
Submitted 2 June, 2025; v1 submitted 18 March, 2025;
originally announced March 2025.
-
Balloon regime: Drop elasticity leads to complete rebound
Authors:
D. Díaz,
A. G. Balasubramanian,
K. Amini,
X. Li,
F. Lundell,
S. Bagheri,
O. Tammisola
Abstract:
When a viscoelastic shear-thinning drop of high elasticity hits a superhydrophobic surface, a growing tail-like filament vertically emerges from the impact spot as the contact line recedes. Notably, the ligament transitions into a balloon-like shape before detaching (Balloon regime) completely from the surface. Here, we attribute the ligament formation to the liquid impalement upon impact into the…
▽ More
When a viscoelastic shear-thinning drop of high elasticity hits a superhydrophobic surface, a growing tail-like filament vertically emerges from the impact spot as the contact line recedes. Notably, the ligament transitions into a balloon-like shape before detaching (Balloon regime) completely from the surface. Here, we attribute the ligament formation to the liquid impalement upon impact into the surface protrusion spacing. Our findings reveal that ligament formation can be controlled by tuning the roughness and surface wettability. We show that ligament stretching mainly depends on inertia and gravity, whereas the high elasticity prevents the ligament break up, enabling complete rebounds.
△ Less
Submitted 14 February, 2025;
originally announced February 2025.
-
Developments and applications of the OPTIMADE API for materials discovery, design, and data exchange
Authors:
Matthew L. Evans,
Johan Bergsma,
Andrius Merkys,
Casper W. Andersen,
Oskar B. Andersson,
Daniel Beltrán,
Evgeny Blokhin,
Tara M. Boland,
Rubén Castañeda Balderas,
Kamal Choudhary,
Alberto Díaz Díaz,
Rodrigo Domínguez García,
Hagen Eckert,
Kristjan Eimre,
María Elena Fuentes Montero,
Adam M. Krajewski,
Jens Jørgen Mortensen,
José Manuel Nápoles Duarte,
Jacob Pietryga,
Ji Qi,
Felipe de Jesús Trejo Carrillo,
Antanas Vaitkus,
Jusong Yu,
Adam Zettel,
Pedro Baptista de Castro
, et al. (34 additional authors not shown)
Abstract:
The Open Databases Integration for Materials Design (OPTIMADE) application programming interface (API) empowers users with holistic access to a growing federation of databases, enhancing the accessibility and discoverability of materials and chemical data. Since the first release of the OPTIMADE specification (v1.0), the API has undergone significant development, leading to the upcoming v1.2 relea…
▽ More
The Open Databases Integration for Materials Design (OPTIMADE) application programming interface (API) empowers users with holistic access to a growing federation of databases, enhancing the accessibility and discoverability of materials and chemical data. Since the first release of the OPTIMADE specification (v1.0), the API has undergone significant development, leading to the upcoming v1.2 release, and has underpinned multiple scientific studies. In this work, we highlight the latest features of the API format, accompanying software tools, and provide an update on the implementation of OPTIMADE in contributing materials databases. We end by providing several use cases that demonstrate the utility of the OPTIMADE API in materials research that continue to drive its ongoing development.
△ Less
Submitted 5 April, 2024; v1 submitted 1 February, 2024;
originally announced February 2024.
-
How water wets and self-hydrophilizes nanopatterns of physisorbed hydrocarbons
Authors:
Diego Diaz,
Ole Nickel,
Nicolas Moraga,
Rodrigo E. Catalan,
Maria Jose Retamal,
Hugo Zelada,
Marcelo Cisternas,
Robert Meissner,
Patrick Huber,
Tomas P. Corrales,
Ulrich G. Volkmann
Abstract:
Weakly bound, physisorbed hydrocarbons could in principle provide a similar water-repellency as obtained by chemisorption of strongly bound hydrophobic molecules at surfaces. Here we present experiments and computer simulations on the wetting behavior of water on molecularly thin, self-assembled alkane carpets of dotriacontane (n-C32H66 or C32) physisorbed on the hydrophilic native oxide layer of…
▽ More
Weakly bound, physisorbed hydrocarbons could in principle provide a similar water-repellency as obtained by chemisorption of strongly bound hydrophobic molecules at surfaces. Here we present experiments and computer simulations on the wetting behavior of water on molecularly thin, self-assembled alkane carpets of dotriacontane (n-C32H66 or C32) physisorbed on the hydrophilic native oxide layer of silicon surfaces during dip-coating from a binary alkane solution. By changing the dip-coating velocity we control the initial C32 surface coverage and achieve distinct film morphologies, encompassing homogeneous coatings with self-organised nanopatterns that range from dendritic nano-islands to stripes. These patterns exhibit a good water wettability even though the carpets are initially prepared with a high coverage of hydrophobic alkane molecules. Using in-liquid atomic force microscopy, along with molecular dynamics simulations, we trace this to a rearrangement of the alkane layers upon contact with water. This restructuring is correlated to the morphology of the C32 coatings, i.e. their fractal dimension. Water molecules displace to a large extent the first adsorbed alkane monolayer and thereby reduce the hydrophobic C32 surface coverage. Thus, our experiments evidence that water molecules can very effectively hydrophilize initially hydrophobic surfaces that consist of weakly bound hydrocarbon carpets.
△ Less
Submitted 26 July, 2021;
originally announced July 2021.
-
Electric surface potential of dodecane nano-drops in aqueous solutions of low ioinic strength
Authors:
Daniela Diaz,
Kareem Rahn-Chique,
German Urbina-Villalba
Abstract:
While the surface charge of solid particles is a direct consequence of their synthesis, the one of suspended oil drops depends on the adsorption equilibrium of the surrounding molecules. The presence of salt raises the polarity of the water phase, favoring the salting out of the surfactant from the aqueous solution and increasing its surface excess. Yet, the electrolyte also screens the resulting…
▽ More
While the surface charge of solid particles is a direct consequence of their synthesis, the one of suspended oil drops depends on the adsorption equilibrium of the surrounding molecules. The presence of salt raises the polarity of the water phase, favoring the salting out of the surfactant from the aqueous solution and increasing its surface excess. Yet, the electrolyte also screens the resulting surface charge of the drops [Debye-Hückel, 1923]. As a result, the electrostatic surface potential increases with the ionic strength until the saturation of the interface and then decreases. This behavior produces a maximum previously observed in hexadecane-in-water nanoemulsions [Urbina-Villalba, 2013; 2015]. Here, the variation of the surface potential of two dodecane-in-water (d/w) nanoemulsions is evaluated as a function of the sodium chloride concentration. As expected, maximum values are obtained for concentrations of 0.5 and 7.5 mM sodium dodecylsulfate (SDS). However, the surface excess of dodecane drops shows an intermediate behavior between the adsorption equilibrium predicted by macroscopic adsorption isotherms, and the one previously found on hexadecane drops. The stability of the prepared emulsions was followed monitoring the change in the average radius of the dispersions during five minutes, six times the lapse of time employed in a typical evaluation of the aggregation rate. In the case of 7.5 mM SDS, the smallest change in size coincides with the maximum surface potential found (40 mM NaCl). This is not observed for 0.5 mM SDS. Three regimes of destabilization are found to exist depending on the ionic strength of the aqueous phase. They correspond to the prevalence of: 1) solubilization/ripening, 2) aggregation, and 3) crystal precipitation.
△ Less
Submitted 21 July, 2020;
originally announced July 2020.
-
Influence of surfactant crystallization on the aggregation rate of dodecane-in-water nanoemulsions. Changes in the viscosity of the external phase
Authors:
Daniela Diaz,
Kareem Rahn-Chique,
Neyda Garcia-Valera,
German Urbina-Villalba
Abstract:
Rates of aggregation of dodecane-in-water (d/w) nanoemulsions stabilized with 7.5 mM sodium dodecylsulfate (SDS) are evaluated beyond 500 mM NaCl. As in the case of hexadecane-in-water (h/w) emulsions, it is found that flocculation rates apparently decrease with the ionic strength, departing appreciably from theoretical predictions. Since many-particle simulations proved to be very time consuming,…
▽ More
Rates of aggregation of dodecane-in-water (d/w) nanoemulsions stabilized with 7.5 mM sodium dodecylsulfate (SDS) are evaluated beyond 500 mM NaCl. As in the case of hexadecane-in-water (h/w) emulsions, it is found that flocculation rates apparently decrease with the ionic strength, departing appreciably from theoretical predictions. Since many-particle simulations proved to be very time consuming, an accurate knowledge of experimental parameters is necessary prior to the realization of further evaluations. Here, the change in the viscosity of the aqueous solution due to the surfactant phase behavior is considered as a possible cause of referred phenomenon. The influence of the external viscosity on the outcome of the simulations is appraised using a quotient between the actual viscosity of the surfactant solution at a given salt concentration and its value in the absence of salt. For that purpose, the viscosity of 0.5 and 7.5 mM SDS solutions was measured between 300 an 900 mM NaCl for temperatures of 20 and 25 °C. It is concluded that the augment of the aqueous viscosity due to the formation of surfactant crystals diminish significantly the aggregation rate. Yet this decline seems insufficient to justify the observed reduction of kFC at 25 C. Nevertheless, it is noteworthy that a 5-degree change in the temperature of the surfactant solution causes a remarkable decrease of kFC . Additionally, a set of two-particle simulations is used here to illustrate the limitations of this methodology for the appraisal of the viscosity contribution. It is confirmed that such approach is only convenient to study the effect of the interaction potential on the aggregation rate, as it was formerly conceived by Fuchs [1936].
△ Less
Submitted 14 July, 2020;
originally announced July 2020.
-
Continuity equation for probability as a requirement of inference over paths
Authors:
Diego González,
Daniela Díaz,
Sergio Davis
Abstract:
In this work we present the fundamental ideas of inference over paths, and show how this formalism implies the continuity equation, which is central for the derivation of the main partial differential equations that constitute non-equilibrium statistical mechanics. Equations such as the Liouville equation, Fokker-Planck equation, among others can be recovered as particular cases of the continuity…
▽ More
In this work we present the fundamental ideas of inference over paths, and show how this formalism implies the continuity equation, which is central for the derivation of the main partial differential equations that constitute non-equilibrium statistical mechanics. Equations such as the Liouville equation, Fokker-Planck equation, among others can be recovered as particular cases of the continuity equation, under different probability fluxes. We derive the continuity equation in its most general form through what we call the \bf time-slicing equation, which lays down the procedure to go from the representation in terms of a path probability functional $ρ[X()]$ to a time-dependent probability density $ρ(x; t)$. The original probability functional $ρ[X()]$ can in principle be constructed from different methods of inference; in this work we sketch an application using the maximum path entropy or maximum caliber principle.
△ Less
Submitted 17 February, 2016;
originally announced February 2016.
-
Transient lateral photovoltaic effect in patterned metal-oxide-semiconductor films
Authors:
J. P. Cascales,
I. Martinez,
D. Diaz,
J. A. Rodrigo,
F. G. Aliev
Abstract:
The time dependent transient lateral photovoltaic effect has been studied with us time resolution and with chopping frequencies in the kHz range, in lithographically patterned 21 nm thick, 5, 10 and 20 um wide and 1500 um long Co lines grown over naturally passivated p-type Si (100). We have observed a nearly linear dependence of the transitorial response with the laser spot position. A transitori…
▽ More
The time dependent transient lateral photovoltaic effect has been studied with us time resolution and with chopping frequencies in the kHz range, in lithographically patterned 21 nm thick, 5, 10 and 20 um wide and 1500 um long Co lines grown over naturally passivated p-type Si (100). We have observed a nearly linear dependence of the transitorial response with the laser spot position. A transitorial response with a sign change in the laser-off stage has been corroborated by numerical simulations. A qualitative explanation suggests a modification of the drift-diffusion model by including the in uence of a local inductance. Our findings indicate that the microstructuring of position sensitive detectors could improve their space-time resolution.
△ Less
Submitted 27 June, 2014;
originally announced June 2014.
