-
First-Principles and Machine Learning Investigation of the Structural and Optoelectronic Properties of Dodecaphenylyne: A Novel Carbon Allotrope
Authors:
Kleuton A. L. Lima,
Jose A. S. Laranjeira,
Nicolas F. Martins,
Julio R. Sambrano,
Alexandre C. Dias,
Luiz A. Ribeiro Junior,
Douglas S. Galvao
Abstract:
We report the computational discovery and characterization of Dodecaphenylyne (DP), a novel carbon allotrope with a distinctive geometric arrangement. DP structural, thermodynamic, mechanical, electronic, and optical properties were evaluated using density functional theory and a machine learning interatomic potential trained explicitly for this material. The formation energy of -7.98 eV/atom indi…
▽ More
We report the computational discovery and characterization of Dodecaphenylyne (DP), a novel carbon allotrope with a distinctive geometric arrangement. DP structural, thermodynamic, mechanical, electronic, and optical properties were evaluated using density functional theory and a machine learning interatomic potential trained explicitly for this material. The formation energy of -7.98 eV/atom indicates high thermodynamic stability, further supported by the absence of imaginary phonon modes and the preservation of structural integrity up to 1000 K in ab initio molecular dynamics simulations. Mechanical analysis reveals high in-plane stiffness with directional dependence: Young's modulus values of 469.09 GPa and 600.41 GPa along the x and y directions, respectively. Electronic band structure and projected density of states analyses confirm the DP semiconducting character. Calculations of carrier mobility using the deformation potential theory reveal pronounced anisotropy, with maximum values reaching up to $30.6 \times 10^4$ cm$^2$/V$\cdot$s (electrons, e) and $8.4 \times 10^4$ cm$^2$/V$\cdot$s (holes, h), much higher than the observed for other 2D materials. DP also exhibits anisotropic optical absorption in the visible and ultraviolet spectrum, highlighting its potential for optoelectronic applications.
△ Less
Submitted 2 June, 2025;
originally announced June 2025.
-
Electronic and optical and topological properties of defects in bismuthene
Authors:
Gabriel Elyas Gama Araujo,
Andreia Luisa da Rosa,
Alexandre Cavalheiro Dias,
Thomas Frauenheim
Abstract:
In this work we use first principles density-functional theory and Bethe-Salpeter equation together with tight-binding based maximally localized wannier functions (MLWF-TB) to investigate the electronic, optical and topological properties of two-dimensional bismuth (bismuthene) containing vacancy defects. We demonstrate that these properties depends on the shape and size of the nanopores. Furtherm…
▽ More
In this work we use first principles density-functional theory and Bethe-Salpeter equation together with tight-binding based maximally localized wannier functions (MLWF-TB) to investigate the electronic, optical and topological properties of two-dimensional bismuth (bismuthene) containing vacancy defects. We demonstrate that these properties depends on the shape and size of the nanopores. Furthermore, \textit{ab initio} molecular dynamics (AIMD) simulations shows that all pores are thermally stable at room temperature. Finally, adsorption of gas phase small molecules indicates that these pores can serve as sensors, opening the path for further applications in gas separation and sensing.
△ Less
Submitted 19 May, 2025;
originally announced May 2025.
-
Optical properties of TiS$_3$ as a novel thin film for single-junction and tandem solar cells
Authors:
Cesar E. P. Villegas,
Enesio Marinho Jr,
A. C. Dias,
Pedro Venezuela,
Alexandre R. Rocha
Abstract:
Sub-micrometer thin films are promising platforms for emerging flexible photovoltaic devices. Although the current market already produces efficient solar cells, the average wafer thickness of these devices remains far from the sub-micrometer scale, making them susceptible to cracking under bending stress and thus precluding their use in flexible device applications. Due to its earth abundance, no…
▽ More
Sub-micrometer thin films are promising platforms for emerging flexible photovoltaic devices. Although the current market already produces efficient solar cells, the average wafer thickness of these devices remains far from the sub-micrometer scale, making them susceptible to cracking under bending stress and thus precluding their use in flexible device applications. Due to its earth abundance, non-toxicity, and low elastic modulus, titanium trisulfide (TiS$_3$) has emerged as a promising alternative for flexible device applications. Here, using excited-state density functional calculations combined with the transfer matrix approach, we perform an optical analysis and assess the efficiency of a prototype photovoltaic device based on sub-micrometer TiS$_3$ thin films. Using optical constants obtained from our first-principles calculations, we evaluate the photovoltaic response of a single-junction device in the radiative limit, finding that a 140-nm-thick active layer achieves a maximum power conversion efficiency of approximately 22%. Additionally, we investigate tandem solar cells that incorporate TiS$_3$ into perovskite thin films, and find that the lower and upper power conversion efficiencies range from approximately 18% to 33%. Overall, our results suggest great potential for using TiS$_3$ thin films as an active layer in the design of highly efficient flexible solar cells.
△ Less
Submitted 8 April, 2025;
originally announced April 2025.
-
Roadmap for Photonics with 2D Materials
Authors:
F. Javier García de Abajo,
D. N. Basov,
Frank H. L. Koppens,
Lorenzo Orsini,
Matteo Ceccanti,
Sebastián Castilla,
Lorenzo Cavicchi,
Marco Polini,
P. A. D. Gonçalves,
A. T. Costa,
N. M. R. Peres,
N. Asger Mortensen,
Sathwik Bharadwaj,
Zubin Jacob,
P. J. Schuck,
A. N. Pasupathy,
Milan Delor,
M. K. Liu,
Aitor Mugarza,
Pablo Merino,
Marc G. Cuxart,
Emigdio Chávez-Angel,
Martin Svec,
Luiz H. G. Tizei,
Florian Dirnberger
, et al. (123 additional authors not shown)
Abstract:
Triggered by the development of exfoliation and the identification of a wide range of extraordinary physical properties in self-standing films consisting of one or few atomic layers, two-dimensional (2D) materials such as graphene, transition metal dichalcogenides (TMDs), and other van der Waals (vdW) crystals currently constitute a wide research field protruding in multiple directions in combinat…
▽ More
Triggered by the development of exfoliation and the identification of a wide range of extraordinary physical properties in self-standing films consisting of one or few atomic layers, two-dimensional (2D) materials such as graphene, transition metal dichalcogenides (TMDs), and other van der Waals (vdW) crystals currently constitute a wide research field protruding in multiple directions in combination with layer stacking and twisting, nanofabrication, surface-science methods, and integration into nanostructured environments. Photonics encompasses a multidisciplinary collection of those directions, where 2D materials contribute with polaritons of unique characteristics such as strong spatial confinement, large optical-field enhancement, long lifetimes, high sensitivity to external stimuli (e.g., electric and magnetic fields, heating, and strain), a broad spectral range from the far infrared to the ultraviolet, and hybridization with spin and momentum textures of electronic band structures. The explosion of photonics with 2D materials as a vibrant research area is producing breakthroughs, including the discovery and design of new materials and metasurfaces with unprecedented properties as well as applications in integrated photonics, light emission, optical sensing, and exciting prospects for applications in quantum information, and nanoscale thermal transport. This Roadmap summarizes the state of the art in the field, identifies challenges and opportunities, and discusses future goals and how to meet them through a wide collection of topical sections prepared by leading practitioners.
△ Less
Submitted 14 April, 2025; v1 submitted 6 April, 2025;
originally announced April 2025.
-
Electronic and optical properties of two-dimensional flat band triphosphides
Authors:
Gabriel Elyas Gama Araujo,
Lucca Moraes Gomes,
Dominike Pacine de Andrade Deus,
Alexandre Cavalheiro Dias,
Andreia Luisa da Rosa
Abstract:
In this work we use first-principles density-functional theory (DFT)
calculations combined with the maximally localized Wannier function
tight binding Hamiltonian (MLWF-TB) and Bethe-Salpeter equation (BSE)
formalism to investigate quasi-particle effects in 2D electronic and
optical properties of triphosphide based two-dimensional materials
XP$_3$ (X = Ga, Ge, As; In, Sn, Sb; Tl, Pb and…
▽ More
In this work we use first-principles density-functional theory (DFT)
calculations combined with the maximally localized Wannier function
tight binding Hamiltonian (MLWF-TB) and Bethe-Salpeter equation (BSE)
formalism to investigate quasi-particle effects in 2D electronic and
optical properties of triphosphide based two-dimensional materials
XP$_3$ (X = Ga, Ge, As; In, Sn, Sb; Tl, Pb and Bi). We find that with
exception of InP$_3$, all structures have indirect band gap. A
noticeable feature is the appearance of flat valence bands associated
to phosphorous atoms, mainly in InP$_3$ and GaP$_3$ structures. Furthermore,
AIMD calculations show that 2D-XP$_3$ is stable at room temperature,
with exception of TlP$_3$ monolayer, which shows a strong distortion
yielding to a phase separation of the P and Tl layers. Finally, we show that
monolayered XP$_3$ exhibits optical absorption with strong excitonic
effects, thus revealing exciting features of these monolayered
materials.
△ Less
Submitted 4 April, 2025;
originally announced April 2025.
-
Rigid m-percolation in limited-valence gels
Authors:
J. C. Neves,
J. M. Tavares,
N. A. M. Araújo,
C. S. Dias
Abstract:
Determining the onset of rigidity in gels is a fundamental challenge with significant practical implications across different applications. Limited-valence, or patchy-particle systems have proven to be a valuable model to study the relationship between microscopic interactions and macroscopic mechanical properties. It has been suggested that the emergence of rigidity coincides with the formation o…
▽ More
Determining the onset of rigidity in gels is a fundamental challenge with significant practical implications across different applications. Limited-valence, or patchy-particle systems have proven to be a valuable model to study the relationship between microscopic interactions and macroscopic mechanical properties. It has been suggested that the emergence of rigidity coincides with the formation of an infinitely spanning cluster of particles with at least three bonds. This work explores this hypothesis, its implications, and its broader applicability across a range of system parameters, by associating the emergence of rigidity with m-percolation transition for m=3. The properties of m-percolation are developed using a mean-field theoretical approach validated with numerical simulations, and used to build phase and rigidity diagrams for different particle valences of both single-component systems and binary mixtures of patchy particles. The difference between connectivity and rigidity percolation thresholds is found to reduce with increasing valence, providing an explanation for the challenges encountered in experimental attempts to distinguish isotropic connectivity percolation from the onset of rigidity. For binary mixtures, we found a robust minimum average valence, below which the gel is never rigid.
△ Less
Submitted 3 April, 2025;
originally announced April 2025.
-
Petal-Graphyne: A Novel 2D Carbon Allotrope for High-Performance Li and Na Ion Storage
Authors:
Kleuton A. L. Lima,
José A. S. Laranjeira,
Nicolas F. Martins,
Alexandre C. Dias,
J ulio R. Sambrano,
Douglas S. Galvão,
Luiz A. Ribeiro Junior
Abstract:
Using density functional theory simulations, this study introduces Petal-Graphyne (PLG), a novel multi-ring metallic structure composed of 4-, 8-, 10-, and 16-membered rings. Its structural, electronic, and lithium/sodium storage properties were comprehensively investigated. PLG exhibits a high theoretical capacity of 1004 mAh/g for Li, Na, and mixed Li/Na ions, surpassing conventional graphite an…
▽ More
Using density functional theory simulations, this study introduces Petal-Graphyne (PLG), a novel multi-ring metallic structure composed of 4-, 8-, 10-, and 16-membered rings. Its structural, electronic, and lithium/sodium storage properties were comprehensively investigated. PLG exhibits a high theoretical capacity of 1004 mAh/g for Li, Na, and mixed Li/Na ions, surpassing conventional graphite anodes. The material remains metallic, with multiple band crossings at the Fermi level. The optimal energy barriers for Li (0.28 eV) and Na (0.25 eV) on PLG and favorable diffusion coefficients in both monolayer and multilayer configurations are unveiled. The open circuit voltages are 0.47 V for Li, 0.51 V for Na, and 0.54 V for mixed-ion storage, suggesting stable electrochemical performance. These results highlight PLG as a promising candidate for next-generation lithium and sodium-ion batteries, combining high storage capacity and efficient ion transport.
△ Less
Submitted 27 March, 2025;
originally announced March 2025.
-
Prospects to bypass nonlocal phenomena in metals using phonon-polaritons
Authors:
Jacob T. Heiden,
Eduardo J. C. Dias,
Minhyuk Kim,
Martin Nørgaard,
Vladimir A. Zenin,
Sergey G. Menabde,
Hu Young Jeong,
N. Asger Mortensen,
Min Seok Jang
Abstract:
Electromagnetic design relies on an accurate understanding of light-matter interactions, yet often overlooks electronic length scales. Under extreme confinement, this omission can lead to nonclassical effects, such as nonlocal response. Here, we use mid-infrared phonon-polaritons in hexagonal boron nitride (hBN) screened by monocrystalline gold flakes to push the limits of nanolight confinement un…
▽ More
Electromagnetic design relies on an accurate understanding of light-matter interactions, yet often overlooks electronic length scales. Under extreme confinement, this omission can lead to nonclassical effects, such as nonlocal response. Here, we use mid-infrared phonon-polaritons in hexagonal boron nitride (hBN) screened by monocrystalline gold flakes to push the limits of nanolight confinement unobstructed by nonlocal phenomena, even when the polariton phase velocity approaches the Fermi velocities of electrons in gold. We employ near-field imaging to probe polaritons in nanometre-thin crystals of hBN on gold and extract their complex propagation constant, observing effective indices exceeding 90. We further show the importance of sample characterisation by revealing a thin low-index interfacial layer naturally forming on monocrystalline gold. Our experiments address a fundamental limitation posed by nonlocal effects in van der Waals heterostructures and outline a pathway to bypass their impact in high-confinement regimes.
△ Less
Submitted 21 March, 2025;
originally announced March 2025.
-
Physicochemical Characterization of a New 2D Semiconductor Carbon Allotrope, C16: An Investigation via Density Functional Theory and Machine Learning-based Molecular Dynamics
Authors:
Kleuton A. L. Lima,
Rodrigo A. F. Alves,
Elie A. Moujaes,
Alexandre C. Dias,
Douglas S. Galvão,
Marcelo L. Pereira Jr,
Luiz A. Ribeiro Jr
Abstract:
This study comprehensively characterizes, with suggested applications, a novel two-dimensional carbon allotrope, C$_{16}$, using Density Functional Theory and machine learning-based molecular dynamics. This nanomaterial is derived from naphthalene and bicyclopropylidene molecules, forming a planar configuration with sp$^2$ hybridization and featuring 3-, 4-, 6-, 8-, and 10-membered rings. Cohesive…
▽ More
This study comprehensively characterizes, with suggested applications, a novel two-dimensional carbon allotrope, C$_{16}$, using Density Functional Theory and machine learning-based molecular dynamics. This nanomaterial is derived from naphthalene and bicyclopropylidene molecules, forming a planar configuration with sp$^2$ hybridization and featuring 3-, 4-, 6-, 8-, and 10-membered rings. Cohesive energy of \SI{-7.1}{\electronvolt/atom}, absence of imaginary frequencies in the phonon spectrum, and the retention of the system's topology after ab initio molecular dynamics simulations confirm the structural stability of C$_{16}$. The nanomaterial exhibits a semiconducting behavior with a direct band gap of \SI{0.59}{\electronvolt} and anisotropic optical absorption in the $y$ direction. Assuming a complete absorption of incident light, it registers a power conversion efficiency of \SI{13}{\percent}, demonstrating relatively good potential for applications in solar energy conversion. The thermoelectric figure of merit ($zT$) reaches 0.8 at elevated temperatures, indicating a reasonable ability to convert a temperature gradient into electrical power. Additionally, C$_{16}$ demonstrates high mechanical strength, with Young's modulus values of \SI{500}{\giga\pascal} and \SI{630}{\giga\pascal} in the $x$ and $y$ directions, respectively. Insights into the electronic, optical, thermoelectric, and mechanical properties of C$_{16}$ reveal its promising capability for energy conversion applications.
△ Less
Submitted 14 March, 2025;
originally announced March 2025.
-
Catenary-like rippled biphenylene/graphene lateral heterojunction
Authors:
Victor M. S. da C. Dias,
Danilo de P. Kuritza,
Igor S. S. de Oliveira,
Jose E. Padilha,
Roberto H. Miwa
Abstract:
In this study, we conduct a first-principles analysis to explore the structural and electronic properties of curved biphenylene/graphene lateral junctions (BPN/G). We start our investigation focusing on the energetic stability of BPN/G by varying the width of the graphene region, BPN/Gn. The electronic structure of BPN/Gn reveals (i) the formation of metallic channels mostly localized along the BP…
▽ More
In this study, we conduct a first-principles analysis to explore the structural and electronic properties of curved biphenylene/graphene lateral junctions (BPN/G). We start our investigation focusing on the energetic stability of BPN/G by varying the width of the graphene region, BPN/Gn. The electronic structure of BPN/Gn reveals (i) the formation of metallic channels mostly localized along the BPN stripes, where (ii) the features of the energy bands near the Fermi level are ruled by the width (n) of the graphene regions, Gn. In the sequence, we find that the hydrogenation of BPN/Gn results in a semiconductor system with a catenary-like rippled geometry. The electronic states of the hydrogenated system are mainly confined in the curved Gn regions, and the dependence of the bandgap on the width of Gn is similar to that of hydrogenated armchair graphene nanoribbons. The effects of curvature on the electronic structure, analyzed in terms of external mechanical strain, revealed that the increase/decrease of the band gap is also dictated by the width of the Gn region. Further electronic transport calculations reveal a combination of strong transmission anisotropy and the emergence of negative differential resistance. Based on these findings, we believe that rippled biphenylene/graphene systems can be useful for the design of two-dimensional nanodevices.
△ Less
Submitted 10 March, 2025;
originally announced March 2025.
-
Roadmap on Nonlocality in Photonic Materials and Metamaterials
Authors:
Francesco Monticone,
N. Asger Mortensen,
Antonio I. Fernández-Domínguez,
Yu Luo,
Xuezhi Zheng,
Christos Tserkezis,
Jacob B. Khurgin,
Tigran V. Shahbazyan,
André J. Chaves,
Nuno M. R. Peres,
Gino Wegner,
Kurt Busch,
Huatian Hu,
Fabio Della Sala,
Pu Zhang,
Cristian Ciracì,
Javier Aizpurua,
Antton Babaze,
Andrei G. Borisov,
Xue-Wen Chen,
Thomas Christensen,
Wei Yan,
Yi Yang,
Ulrich Hohenester,
Lorenz Huber
, et al. (41 additional authors not shown)
Abstract:
Photonic technologies continue to drive the quest for new optical materials with unprecedented responses. A major frontier in this field is the exploration of nonlocal (spatially dispersive) materials, going beyond the local, wavevector-independent assumption traditionally made in optical material modeling. On one end, the growing interest in plasmonic, polaritonic and quantum materials has reveal…
▽ More
Photonic technologies continue to drive the quest for new optical materials with unprecedented responses. A major frontier in this field is the exploration of nonlocal (spatially dispersive) materials, going beyond the local, wavevector-independent assumption traditionally made in optical material modeling. On one end, the growing interest in plasmonic, polaritonic and quantum materials has revealed naturally occurring nonlocalities, emphasizing the need for more accurate models to predict and design their optical responses. This has major implications also for topological, nonreciprocal, and time-varying systems based on these material platforms. Beyond natural materials, artificially structured materials--metamaterials and metasurfaces--can provide even stronger and engineered nonlocal effects, emerging from long-range interactions or multipolar effects. This is a rapidly expanding area in the field of photonic metamaterials, with open frontiers yet to be explored. In the case of metasurfaces, in particular, nonlocality engineering has become a powerful tool for designing strongly wavevector-dependent responses, enabling enhanced wavefront control, spatial compression, multifunctional devices, and wave-based computing. Furthermore, nonlocality and related concepts play a critical role in defining the ultimate limits of what is possible in optics, photonics, and wave physics. This Roadmap aims to survey the most exciting developments in nonlocal photonic materials, highlight new opportunities and open challenges, and chart new pathways that will drive this emerging field forward--toward new scientific discoveries and technological advancements.
△ Less
Submitted 28 March, 2025; v1 submitted 1 March, 2025;
originally announced March 2025.
-
Computational Characterization of the Recently Synthesized Pristine and Porous 12-Atom-Wide Armchair Graphene Nanoribbon
Authors:
Djardiel da S. Gomes,
Isaac M. Felix,
Willian F. Radel,
Alexandre C. Dias,
Luiz A. Ribeiro Junior,
Marcelo L. Pereira Junior
Abstract:
Recently synthesized Porous 12-Atom-Wide Armchair Graphene Nanoribbons Nano Lett. 2024, 24, 10718-10723 exhibit tunable properties through periodic porosity, enabling precise control over their electronic, optical, thermal, and mechanical behavior. This work presents a comprehensive theoretical characterization of pristine and porous 12-AGNRs based on density functional theory (DFT) and molecular…
▽ More
Recently synthesized Porous 12-Atom-Wide Armchair Graphene Nanoribbons Nano Lett. 2024, 24, 10718-10723 exhibit tunable properties through periodic porosity, enabling precise control over their electronic, optical, thermal, and mechanical behavior. This work presents a comprehensive theoretical characterization of pristine and porous 12-AGNRs based on density functional theory (DFT) and molecular dynamics (MD) simulations. DFT calculations reveal substantial electronic modifications, including band gap widening and the emergence of localized states. Analyzed within the Bethe-Salpeter equation (BSE) framework, optical properties highlight strong excitonic effects and significant absorption shifts. Thermal transport simulations indicate a pronounced reduction in conductivity due to enhanced phonon scattering at nanopores. At the same time, MD-based mechanical analysis shows decreased stiffness and strength while maintaining structural integrity. Despite these modifications, porous 12-AGNRs remain mechanically and thermally stable. These findings establish porosity engineering as a powerful strategy for tailoring graphene nanoribbons' functional properties, reinforcing their potential for nanoelectronic, optoelectronic, and thermal management applications.
△ Less
Submitted 27 February, 2025;
originally announced February 2025.
-
Exploring Novel 2D Analogues of Goldene: Electronic, Mechanical, and Optical Properties of Silverene and Copperene
Authors:
Emanuel J. A. dos Santos,
Rodrigo A. F. Alves,
Alexandre C. Dias,
Marcelo L. Pereira Junior,
Douglas S. Galvão,
Luiz A. Ribeiro Junior
Abstract:
Two-dimensional (2D) materials have garnered significant attention due to their unique properties and broad application potential. Building on the success of goldene, a monolayer lattice of gold atoms, we explore its proposed silver and copper analogs, silverene and copperene, using density functional theory calculations. Our findings reveal that silverene and copperene are energetically stable, w…
▽ More
Two-dimensional (2D) materials have garnered significant attention due to their unique properties and broad application potential. Building on the success of goldene, a monolayer lattice of gold atoms, we explore its proposed silver and copper analogs, silverene and copperene, using density functional theory calculations. Our findings reveal that silverene and copperene are energetically stable, with formation energies of -2.3 eV/atom and -3.1 eV/atom, closely matching goldene's -2.9 eV/atom. Phonon dispersion and ab initio molecular dynamics simulations confirm their structural and dynamical stability at room temperature, showing no bond breaking or structural reconfiguration. Mechanical analyses indicate isotropy, with Young's moduli of 73 N/m, 44 N/m, and 59 N/m for goldene, silverene, and copperene, respectively, alongside Poisson's ratios of 0.46, 0.42, and 0.41. These results suggest comparable rigidity and deformation characteristics. Electronic band structure analysis highlights their metallic nature, with variations in the band profiles at negative energy levels. Despite their metallic character, these materials exhibit optical properties akin to semiconductors, pointing to potential applications in optoelectronics.
△ Less
Submitted 17 February, 2025;
originally announced February 2025.
-
Susceptible-Infected-Susceptible dynamics with mitigation in connection of infected population
Authors:
K. M. Kim,
C. Dias,
M. O. Hase
Abstract:
The susceptible-infected-susceptible epidemic model is analyzed through a degree-based mean-field approach. In this work, a mitigation factor is introduced in the probability of finding an infected individual following an edge. This modification simulates situations where the infected population reduces its participation in the dynamics of disease propagation, as may happen with the seclusion or h…
▽ More
The susceptible-infected-susceptible epidemic model is analyzed through a degree-based mean-field approach. In this work, a mitigation factor is introduced in the probability of finding an infected individual following an edge. This modification simulates situations where the infected population reduces its participation in the dynamics of disease propagation, as may happen with the seclusion or hospitalization of infected individuals. A detailed investigation of this new model and its comparison to the original one (without the mitigation factor) was performed on the Barabási-Albert network, where some important results were analytically accessible.
△ Less
Submitted 8 January, 2025;
originally announced January 2025.
-
Convolutional Neural Network analysis of optical texture patterns in liquid-crystal skyrmions
Authors:
J. Terroa,
M. Tasinkevych,
C. S. Dias
Abstract:
Liquid crystals are known for their optical birefringence, a property that gives rise to intricate patterns and colors when viewed in a microscope between crossed polarisers. Resulting images are rich in geometric patterns and serve as valuable fingerprints of the liquid crystal's intrinsic properties. By using machine learning techniques, it is possible to extract from the images information abou…
▽ More
Liquid crystals are known for their optical birefringence, a property that gives rise to intricate patterns and colors when viewed in a microscope between crossed polarisers. Resulting images are rich in geometric patterns and serve as valuable fingerprints of the liquid crystal's intrinsic properties. By using machine learning techniques, it is possible to extract from the images information about, e.g., liquid crystal elastic constants, the scalar order parameter, local orientation of the director, etc. Machine learning can also be employed to identify phase transitions and classify different liquid crystalline phases and topological defects. In addition to well studied singular defects such as point or line disclinations, liquid crystals can also host non-singular solitonic defects such as skyrmions, hopfions, and torons. The solitons, with their localised and stable configurations, offer an alternative view into material properties and behaviour of liquid crystals. In this study, we demonstrate that the optical signatures of skyrmions can be utilised effectively in machine learning to predict important system parameters. Our method focuses specifically on the skyrmion-localised regions, reducing significantly the computational cost. By training convolutional neural networks on simulated polarised optical microscopy images of liquid crystal skyrmions, we showcase the ability of trained networks to accurately predict several selected parameters such as the free energy, cholesteric pitch, and strength of applied electric fields. This study highlights the importance of localized topologically arrested order parameter configurations for materials characterisation research empowered by state-of-the-art data science methods, and may pave the way for the development of advanced skyrmion-based applications.
△ Less
Submitted 23 October, 2024; v1 submitted 19 October, 2024;
originally announced October 2024.
-
Liquid crystal skyrmions as elastic multipoles
Authors:
Allison W. Teixeira,
Cristóvão S. Dias,
Mykola Tasinkevych
Abstract:
Solitons in liquid crystals are spatially localised stable configuration of the liquid crystal orientational order parameter that exhibit emergent particle-like properties such as mutual interaction, translational motion and reconfigurable self-asembling behaviour in oscillating electric fields. Understanding solitons' out-of-equilibrium interactions remains a significant challenge. In this study,…
▽ More
Solitons in liquid crystals are spatially localised stable configuration of the liquid crystal orientational order parameter that exhibit emergent particle-like properties such as mutual interaction, translational motion and reconfigurable self-asembling behaviour in oscillating electric fields. Understanding solitons' out-of-equilibrium interactions remains a significant challenge. In this study, we present a minimalist model capable to address this challenge. We derive analytically elastic multipole interaction potentials between two solitons assuming two dimensional LC configurations. We determine the soliton's elastic dipole and quadrupole moments based on the equilibrium director textures obtained as minimizers of the Frank-Oseen free energy functional. Incorporating the time dependence of the soliton's multipole moments in response to electric field oscillations, we carry out particle-based simulations that demonstrate the formation of soliton chains and two dimensional clusters by varying the amplitude and/or the frequency of the electric field, in agreement with experiments. The presented formalism may serve as a benchmark model for future theoretical developments incorporating, e.g. higher order elastic multipoles or/and many body interactions.
△ Less
Submitted 4 October, 2024;
originally announced October 2024.
-
Raman Spectra and Excitonic Effects of the novel Ta$_2$Ni$_3$Te$_5$ Monolayer
Authors:
Alexandre C. Dias,
Raphael M. Tromer,
Humberto R. Gutiérrez,
Douglas S. Galvão,
Elie A. Moujaes
Abstract:
We have investigated the Raman spectrum and excitonic effects of the novel two-dimensional Ta$_2$Ni$_3$Te$_5$ structure. The monolayer is an indirect band gap semiconductor with an electronic band gap value of 0.09 eV and 0.38 eV, determined using GGA-PBE and HSE06 exchange-correlation functionals, respectively. Since this structure is energetically, dynamically, and mechanically stable, it could…
▽ More
We have investigated the Raman spectrum and excitonic effects of the novel two-dimensional Ta$_2$Ni$_3$Te$_5$ structure. The monolayer is an indirect band gap semiconductor with an electronic band gap value of 0.09 eV and 0.38 eV, determined using GGA-PBE and HSE06 exchange-correlation functionals, respectively. Since this structure is energetically, dynamically, and mechanically stable, it could be synthesized as a free-standing material. We identify ten Raman and ten infrared active modes for various laser energies, including those commonly used in Raman spectroscopy experiments. It was also observed that the contribution of Ni atoms is minimal in most Raman vibrational modes. In contrast, most infrared vibrational modes do not involve the vibration of the Ta atoms. As far as the optical properties are concerned, this monolayer shows a robust linear anisotropy, an exciton binding energy of 287 meV, and also presents a high reflectivity in the ultraviolet region, which is more intense for linear light polarization along the x-direction.
△ Less
Submitted 24 September, 2024;
originally announced September 2024.
-
Free-electron coupling to surface polaritons mediated by small scatterers
Authors:
Leila Prelat,
Eduardo J. C. Dias,
F. Javier García de Abajo
Abstract:
The ability of surface polaritons (SPs) to enhance and manipulate light fields down to deep-subwavelength length scales enables applications in optical sensing and nonlinear optics at the nanoscale. However, the wavelength mismatch between light and SPs prevents direct optical excitation of surface-bound modes, thereby limiting the widespread development of SP-based photonics. Free electrons are a…
▽ More
The ability of surface polaritons (SPs) to enhance and manipulate light fields down to deep-subwavelength length scales enables applications in optical sensing and nonlinear optics at the nanoscale. However, the wavelength mismatch between light and SPs prevents direct optical excitation of surface-bound modes, thereby limiting the widespread development of SP-based photonics. Free electrons are a natural choice to directly excite strongly confined SPs because they can supply field components of high momentum at designated positions with subnanometer precision. Here, we theoretically explore free-electron--SP coupling mediated by small scatterers and show that low-energy electrons can efficiently excite surface modes with a maximum probability reached at an optimum surface--scatterer distance. By aligning the electron beam with a periodic array of scatterers placed near a polariton-supporting interface, in-plane Smith--Purcell emission results in the excitation of surface modes along well-defined directions. Our results support using scattering elements to excite SPs with low-energy electrons.
△ Less
Submitted 25 June, 2024;
originally announced June 2024.
-
On the mechanical, thermoelectric, and excitonic properties of Tetragraphene monolayer
Authors:
Raphael M. Tromer,
L. A. Ribeiro Júnior,
Douglas S. Galvão,
Alexandre C. Dias,
Elie A. Moujaes
Abstract:
Two-dimensional carbon allotropes have attracted much attention due to their extraordinary optoelectronic and mechanical properties, which can be exploited for energy conversion and storage applications. In this work, we use density functional theory simulations and semi-empirical methods to investigate the mechanical, thermoelectric, and excitonic properties of Tetrahexcarbon (also known as Tetra…
▽ More
Two-dimensional carbon allotropes have attracted much attention due to their extraordinary optoelectronic and mechanical properties, which can be exploited for energy conversion and storage applications. In this work, we use density functional theory simulations and semi-empirical methods to investigate the mechanical, thermoelectric, and excitonic properties of Tetrahexcarbon (also known as Tetragraphene). This quasi-2D carbon allotrope exhibits a combination of squared and hexagonal rings in a buckled shape. Our findings reveal that tetragraphene is a semiconductor material with a direct electronic bandgap of 2.66 eV. Despite the direct nature of the electronic band structure, this material has an indirect exciton ground state of 2.30 eV, which results in an exciton binding energy of 0.36 eV. At ambient temperature, we obtain that the lattice thermal conductivity for tetragraphene is approximately 118 W/mK. Young's modulus and the shear modulus of tetragraphene are almost isotropic, with maximum values of 286.0 N/m and 133.7 N/m, respectively, while exhibiting a very low anisotropic Poisson ratio value of 0.09.
△ Less
Submitted 30 January, 2024;
originally announced January 2024.
-
Signature of excitonic insulators in phosphorene nanoribbons
Authors:
A. F. P. de Oliveira,
A. L. da Rosa,
A. C. Dias
Abstract:
Phosphorene is a recently developed two-dimensional (2D) material that has attracted tremendous attention because of its unique anisotropic optical properties and quasi-one-dimensional (1D) excitons. We use first-principles calculations combined with the maximally localized Wannier function tight binding Hamiltonian (MLWF-TB) and Bethe-Salpeter equation (BSE) formalism to investigate quasiparticle…
▽ More
Phosphorene is a recently developed two-dimensional (2D) material that has attracted tremendous attention because of its unique anisotropic optical properties and quasi-one-dimensional (1D) excitons. We use first-principles calculations combined with the maximally localized Wannier function tight binding Hamiltonian (MLWF-TB) and Bethe-Salpeter equation (BSE) formalism to investigate quasiparticle effects of 2D and quasi-1D blue and black phosphorene nanoribbons. Our electronic structure calculations shows that both blue and black monolayered phases are semiconductors. On the other hand black phosphorene zigzag nanoribbons are metallic. Similar behavior is found for very thin blue phosphorene zig-zag and armchair nanoribbon. As a general behavior, the exciton binding energy decreases as the ribbon width increases, which highlights the importance of quantum confinement effects. The solution of the BSE shows that the blue phosphorene monolayer has an exciton binding energy four times higher than that of the black phosphorene counterpart. Furthermore, both monolayers show a different linear optical response with respect to light polarization, as black phosphorene is highly anisotropic. We find a similar, but less pronounced, optical anisotropy for blue phosphorene monolayer, caused exclusively by the quasi-particle effects. Finally, we show that some of the investigated nanoribbons show a spin-triplet excitonic insulator behavior, thus revealing exciting features of these nanoribbons and therefore provides important advances in the understanding of quasi-one dimensional phosphorus-based materials.
△ Less
Submitted 7 January, 2024;
originally announced January 2024.
-
Structural criterion for the onset of rigidity in a colloidal gel
Authors:
C. S. Dias,
J. C. Neves,
M. M. Telo da Gama,
E. del Gado,
N. A. M. Araujo
Abstract:
Identifying the necessary conditions for the onset of rigidity in a gel remains a challenge. It has been suggested that local particle coordination could be used to establish such conditions, but rigid gels occur for various coordination numbers. Combining simulations, oscillatory rheology, and a percolation analysis, for particles where the valence can be controlled, we find that the onset of rig…
▽ More
Identifying the necessary conditions for the onset of rigidity in a gel remains a challenge. It has been suggested that local particle coordination could be used to establish such conditions, but rigid gels occur for various coordination numbers. Combining simulations, oscillatory rheology, and a percolation analysis, for particles where the valence can be controlled, we find that the onset of rigidity coincides with the percolation of particles with three or more bonds, which arises after the connectivity percolation. We show that the rigidity results from an interplay of bonding and non-bonding interactions, providing insight into low-valence colloidal gel rigidity.
△ Less
Submitted 25 July, 2023;
originally announced July 2023.
-
Environmental Memory Boosts Group Formation of Clueless Individuals
Authors:
Cristóvão S. Dias,
Manish Trivedi,
Giovanni Volpe,
Nuno A. M. Araújo,
Giorgio Volpe
Abstract:
The formation of groups of interacting individuals improves performance and fitness in many decentralised systems, from micro-organisms to social insects, from robotic swarms to artificial intelligence algorithms. Often, group formation and high-level coordination in these systems emerge from individuals with limited information-processing capabilities implementing low-level rules of communication…
▽ More
The formation of groups of interacting individuals improves performance and fitness in many decentralised systems, from micro-organisms to social insects, from robotic swarms to artificial intelligence algorithms. Often, group formation and high-level coordination in these systems emerge from individuals with limited information-processing capabilities implementing low-level rules of communication to signal to each other. Here, we show that, even in a community of clueless individuals incapable of processing information and communicating, a dynamic environment can coordinate group formation by transiently storing memory of the earlier passage of individuals. Our results identify a new mechanism of indirect coordination via shared memory that is primarily promoted and reinforced by dynamic environmental factors, thus overshadowing the need for any form of explicit signalling between individuals. We expect this pathway to group formation to be relevant for understanding and controlling self-organisation and collective decision making in both living and artificial active matter in real-life environments.
△ Less
Submitted 2 June, 2023; v1 submitted 1 June, 2023;
originally announced June 2023.
-
Particle-based model of active skyrmions
Authors:
Allison W. Teixeira,
Mykola Tasinkevych,
Cristóvão S. Dias
Abstract:
Motivated by recent experimental results that reveal rich collective dynamics of thousands-to-millions of active liquid crystal skyrmions we have developed a coarse grained particle-based model of the dynamics of skyrmions in dilute regime. The basic physical mechanism of the skyrmion motion is related to the non-reciprocal rotational dynamics of the liquid crystal director field when the electric…
▽ More
Motivated by recent experimental results that reveal rich collective dynamics of thousands-to-millions of active liquid crystal skyrmions we have developed a coarse grained particle-based model of the dynamics of skyrmions in dilute regime. The basic physical mechanism of the skyrmion motion is related to the non-reciprocal rotational dynamics of the liquid crystal director field when the electric field is turned {\it on} and {\it off}. Guided by fine grained results of the Frank-Oseen continuum approach, we have mapped this non-reciprocal director distortions onto an effective force acting asymmetrically upon switching the electrical field {\it on} or {\it off}. The coarse grained model correctly reproduces the skyrmion dynamics, including the velocity reversal as a function of the frequency of a pulse width modulated driving voltage. We have also obtained approximate analytical expressions for the phenomenological model parameters encoding their dependence upon the cholesteric pitch and the strength of the electric field. This has been achieved by fitting coarse grained skyrmion trajectories to those determined in the framework of the Frank-Oseen model.
△ Less
Submitted 5 May, 2023;
originally announced May 2023.
-
The two laws of engines in general, information and the meaning of entropy
Authors:
Penha Maria Cardozo Dias
Abstract:
The association of information with entropy has been argued on plausibility arguments involving the operation of imaginary engines and beings, and it is not a universal theorem. In this paper, a theorem by Charles Bennett on reversible computation is recognized as the much needed theorem. It is proposed a real, non thermal engine, operated by humans. Its operation has stages analogous to the stage…
▽ More
The association of information with entropy has been argued on plausibility arguments involving the operation of imaginary engines and beings, and it is not a universal theorem. In this paper, a theorem by Charles Bennett on reversible computation is recognized as the much needed theorem. It is proposed a real, non thermal engine, operated by humans. Its operation has stages analogous to the stages in Bennett's reversible three-tape computer. The engine makes possible to prove two results: (1) the engine operates on two laws, similar to the laws of thermodynamics, which are conditions on the possibility of resetting the engine; (2) entropy is the measure of erased information, and is measured in physical units, which complies with Landauer's principle. A prototype at work is shown in video.
△ Less
Submitted 20 April, 2023;
originally announced April 2023.
-
Generation and control of localized terahertz fields in photoemitted electron plasmas
Authors:
Eduardo J. C. Dias,
I. Madan,
S. Gargiulo,
F. Barantani,
M. Yannai,
G. M. Vanacore,
I. Kaminer,
F. Carbone,
F. Javier García de Abajo
Abstract:
Dense micron-sized electron plasmas, such as those generated upon irradiation of nanostructured metallic surfaces by intense femtosecond laser pulses, constitute a rich playground to study light-matter interactions, many-body phenomena, and out-of-equilibrium charge dynamics. Besides their fundamental interest, laser-induced plasmas hold potential for the generation of localized terahertz radiatio…
▽ More
Dense micron-sized electron plasmas, such as those generated upon irradiation of nanostructured metallic surfaces by intense femtosecond laser pulses, constitute a rich playground to study light-matter interactions, many-body phenomena, and out-of-equilibrium charge dynamics. Besides their fundamental interest, laser-induced plasmas hold potential for the generation of localized terahertz radiation pulses. However, the underlying mechanisms ruling the formation and evolution of these plasmas is not yet well understood. Here, we develop a comprehensive microscopic theory to predictably describe the spatiotemporal dynamics of laser-pulse-induced plasmas. Through detailed analysis of electron emission, metal screening, and plasma cloud interactions, we investigate the spatial, temporal, and spectral characteristics of the so-generated terahertz fields, which can be extensively controlled through the metal morphology and the illumination conditions. We further describe the interaction with femtosecond electron beams to explain recent ultrafast electron microscopy experiments, whereby the position and temporal dependence of the observed electron acceleration permits assessing the associated terahertz field. Besides its potential application to the design of low-frequency light sources, our work contributes with fundamental insight on the generation and dynamics of micron-scale electron plasmas and their interaction with ultrafast electron pulses.
△ Less
Submitted 11 March, 2023;
originally announced March 2023.
-
$μ$eV electron spectromicroscopy using free-space light
Authors:
Yves Auad,
Eduardo J. C. Dias,
Marcel Tencé,
Jean-Denis Blazit,
Xiaoyan Li,
Luiz Fernando Zagonel,
Odile Stéphan,
Luiz H. G. Tizei,
F. Javier García de Abajo,
Mathieu Kociak
Abstract:
The synergy between free electrons and light has recently been leveraged to reach an impressive degree of simultaneous spatial and spectral resolution, enabling applications in microscopy and quantum optics. However, the required combination of electron optics and light injection into the spectrally narrow modes of arbitrary specimens remains a challenge. Here, we demonstrate microelectronvolt spe…
▽ More
The synergy between free electrons and light has recently been leveraged to reach an impressive degree of simultaneous spatial and spectral resolution, enabling applications in microscopy and quantum optics. However, the required combination of electron optics and light injection into the spectrally narrow modes of arbitrary specimens remains a challenge. Here, we demonstrate microelectronvolt spectral resolution in the nanoscale mapping of photonic modes with quality factors as high as 10$^4$. We rely on mode-matching of a tightly focused laser beam to whispering gallery modes to achieve a 10$^8$-fold increase in light-electron coupling efficiency. By adapting the shape and size of free-space optical beams to address specific physical questions, our approach allows us to interrogate any type of photonic structure with unprecedented spectral and spatial detail
△ Less
Submitted 23 December, 2022;
originally announced December 2022.
-
Quantum Noise as a Symmetry-Breaking Field
Authors:
Beatriz C. Dias,
Domagoj Perkovic,
Masudul Haque,
Pedro Ribeiro,
Paul A. McClarty
Abstract:
We investigate the effect of quantum noise on the measurement-induced quantum phase transition in monitored random quantum circuits. Using the efficient simulability of random Clifford circuits, we find that the transition is broadened into a crossover and that the phase diagram as a function of projective measurements and noise exhibits several distinct regimes. We show that a mapping to a classi…
▽ More
We investigate the effect of quantum noise on the measurement-induced quantum phase transition in monitored random quantum circuits. Using the efficient simulability of random Clifford circuits, we find that the transition is broadened into a crossover and that the phase diagram as a function of projective measurements and noise exhibits several distinct regimes. We show that a mapping to a classical statistical mechanics problem accounts for the main features of the random circuit phase diagram. The bulk noise maps to an explicit permutation symmetry breaking coupling; this symmetry is spontaneously broken when the noise is switched off. These results have implications for the realization of entanglement transitions in noisy quantum circuits.
△ Less
Submitted 29 August, 2022;
originally announced August 2022.
-
Percolation in binary mixtures of linkers and particles: chaining {\it {vs}} branching
Authors:
M. Gouveia,
C. S. Dias,
J. M. Tavares
Abstract:
Equilibrium gels of colloidal particles can be realized through the introduction of a second species, a linker that mediates the bonds between the colloids. A gel forming binary mixture whose linkers can self-assemble into linear chains while still promoting the aggregation of particles is considered in this work. The particles are patchy particles with $f_C$ patches of type $C$ and the linkers ar…
▽ More
Equilibrium gels of colloidal particles can be realized through the introduction of a second species, a linker that mediates the bonds between the colloids. A gel forming binary mixture whose linkers can self-assemble into linear chains while still promoting the aggregation of particles is considered in this work. The particles are patchy particles with $f_C$ patches of type $C$ and the linkers are patchy particles with $2$ patches of type $A$ and $f_B$ patches of type B. The bonds between patches of type $A$ ($AA$ bonds) promote the formation of linear chains of linkers. Two different ways (model A and model B) of bonding the linkers to the particles - or inducing branching - are studied. In model A, there is a competition between chaining and branching, since the bonding between linkers and particles is done through $AC$ bonds only. In model B linkers aggregate to particles through bonds $BC$ only, making chaining and branching independent. The percolation behaviour of these two models is studied in detail, employing a generalized Flory-Stockmayer theory and Monte Carlo simulations. The self-assembly of linkers into chains reduces the fraction of particles needed for percolation to occur (models A and B) and induces percolation when the fraction of particles is high (model B). Percolation by heating and percolation loops in temperature composition diagrams are obtained when the formation of chains is energetically favourable, by increasing the entropic gain of branching (model A). Chaining and branching are found to follow a model dependent relation at percolation, which shows that, for the same composition, longer chains require less branching for percolation to occur.
△ Less
Submitted 23 August, 2022;
originally announced August 2022.
-
Cell response in free-packed granular systems
Authors:
Ana F. Cunha,
André F. V. Matias,
Cristóvão S. Dias,
Mariana B. Oliveira,
Nuno A. M. Araújo,
João F. Mano
Abstract:
The study of the interactions of living adherent cells with mechanically stable (visco)elastic materials enables understanding and exploiting physiological phenomena mediated by cell-extracellular communication. However, insight on the interaction of cells and surrounding objects with different stability patterns upon cell contact might unveil cell responses that may be engineered for innovative a…
▽ More
The study of the interactions of living adherent cells with mechanically stable (visco)elastic materials enables understanding and exploiting physiological phenomena mediated by cell-extracellular communication. However, insight on the interaction of cells and surrounding objects with different stability patterns upon cell contact might unveil cell responses that may be engineered for innovative applications. Here, it is hypothesized that the efficiency of cell attachment, spreading and movement across a free-packed granular bed of microparticles depend on microparticle diameter, raising the possibility of a necessary minimum traction force for the reinforcement of cell-particle bonds, and long-term cell adhesion. The results suggest that microparticles with 14-20 μm are prone to cell-mediated mobility, holding the potential of inducing early cell detachment, while objects with diameters from 38-85 μm enable long-lasting cell adhesion and proliferation. An in-silico hybrid particle-based model that addresses time-dependent biological mechanisms of cell adhesion is proposed, providing inspiration for engineering platforms to address healthcare-related challenges.
△ Less
Submitted 5 September, 2022; v1 submitted 8 August, 2022;
originally announced August 2022.
-
Effect of anisotropy on the formation of active particle films
Authors:
T. C. Rebocho,
M. Tasinkevych,
C. S. Dias
Abstract:
Active colloids belong to a class of non-equilibrium systems where energy uptake, conversion and dissipation occurs at the level of individual colloidal particles, which can lead to particles self-propelled motion and surprising collective behavior. Examples include coexistence of vapor and liquid-like steady states for active particles with repulsive interactions only, phenomena known as motility…
▽ More
Active colloids belong to a class of non-equilibrium systems where energy uptake, conversion and dissipation occurs at the level of individual colloidal particles, which can lead to particles self-propelled motion and surprising collective behavior. Examples include coexistence of vapor and liquid-like steady states for active particles with repulsive interactions only, phenomena known as motility induced phase transition. Similarly to motile unicellular organisms, active colloids tend to accumulate at confining surfaces forming dense adsorbed films. In this work, we study the structure and dynamics of aggregates of self-propelled particle near confining solid surfaces, focusing on the effects of the particle anisotropic interactions. We performed Langevin dynamics simulations of two complementary models for active particles: ellipsoidal particles interacting through Gay-Berne potential, and rod-like particles composed of several repulsive Lennard-Jones beads. We observe a non-monotonic behavior of the structure of clusters formed along the confining surface as a function of the particle aspect ratio, with a film spreading when particles are near spherical, compact clusters with hedgehog-like particle orientation for more elongated active particles, and a complex dynamical behavior for intermediate aspect ratio. The stabilization time of cluster formation along the confining surface also displays a non-monotonic dependence on the aspect ratio, with a local minimum at intermediate values. Additionally, we demonstrate that the hedgehog-like aggregates formed by Gay-Berne ellipsoids exhibit higher structural stability as compared to the ones formed by purely repulsive active rods, which are stable due to the particle activity only.
△ Less
Submitted 30 June, 2022;
originally announced June 2022.
-
Ultrafast Electron Microscopy of Nanoscale Charge Dynamics in Semiconductors
Authors:
Michael Yannai,
Raphael Dahan,
Alexey Gorlach,
Yuval Adiv,
Kangpeng Wang,
Ivan Madan,
Simone Gargiulo,
Francesco Barantani,
Eduardo J. C. Dias,
Giovanni Maria Vanacore,
Nicholas Rivera,
Fabrizio Carbone,
F. Javier García de Abajo,
Ido Kaminer
Abstract:
The ultrafast dynamics of charge carriers in solids plays a pivotal role in emerging optoelectronics, photonics, energy harvesting, and quantum technology applications. However, the investigation and direct visualization of such non-equilibrium transport phenomena remains as a long-standing challenge, owing to the nanometer-femtosecond spatio-temporal scales at which the charge carriers evolve. He…
▽ More
The ultrafast dynamics of charge carriers in solids plays a pivotal role in emerging optoelectronics, photonics, energy harvesting, and quantum technology applications. However, the investigation and direct visualization of such non-equilibrium transport phenomena remains as a long-standing challenge, owing to the nanometer-femtosecond spatio-temporal scales at which the charge carriers evolve. Here, we propose and demonstrate a novel interaction mechanism enabling nanoscale imaging of the femtosecond dynamics of charge carriers in solids. This imaging modality, which we name charge dynamics electron microscopy (CDEM), exploits the strong interaction between terahertz (THz) electromagnetic near fields produced by the moving charges and synchronized free-electron pulses in an ultrafast scanning transmission electron microscope. The measured free-electron energy at different spatio-temporal coordinates allows us to directly retrieve the THz near-field amplitude and phase, from which we reconstruct movies of the generated charges by comparison with microscopic theory. The introduced CDEM technique thus allows us to investigate previously inaccessible spatio-temporal regimes of charge dynamics in solids, for example revealing new insight into the photo-Dember effect, showing oscillations of photo-generated electron-hole distributions inside a semiconductor. Our work lays the foundation for exploring a wide range of previously inaccessible charge-transport phenomena in condensed matter using ultrafast electron microscopy.
△ Less
Submitted 2 June, 2022;
originally announced June 2022.
-
High-harmonic generation enhancement with graphene heterostructures
Authors:
Irati Alonso Calafell,
Lee A. Rozema,
Alessandro Trenti,
Justus Bohn,
Eduardo J. C. Dias,
Philipp K. Jenke,
Kishan S. Menghrajani,
David Alcaraz Iranzo,
F. Javier Garcia de Abajo,
Frank H. L. Koppens,
Euan Hendry,
Philip Walther
Abstract:
We investigate high-harmonic generation in graphene heterostructures consisting of metallic nanoribbons separated from a graphene sheet by either a few-nanometer layer of aluminum oxide or an atomic monolayer of hexagonal boron nitride. The nanoribbons amplify the near-field at the graphene layer relative to the externally applied pumping, thus allowing us to observe third- and fifth-harmonic gene…
▽ More
We investigate high-harmonic generation in graphene heterostructures consisting of metallic nanoribbons separated from a graphene sheet by either a few-nanometer layer of aluminum oxide or an atomic monolayer of hexagonal boron nitride. The nanoribbons amplify the near-field at the graphene layer relative to the externally applied pumping, thus allowing us to observe third- and fifth-harmonic generation in the carbon monolayer at modest pump powers in the mid-infrared. We study the dependence of the nonlinear signals on the ribbon width and spacer thickness, as well as pump power and polarization, and demonstrate enhancement factors relative to bare graphene reaching 1600 and 4100 for third- and fifth-harmonic generation, respectively. Our work supports the use of graphene heterostructures to selectively enhance specific nonlinear processes of interest, an essential capability for the design of nanoscale nonlinear devices.
△ Less
Submitted 28 March, 2022;
originally announced March 2022.
-
Molecular Dynamics Simulations of Active Matter using LAMMPS
Authors:
C. S. Dias
Abstract:
LAMMPS is a widely popular classical Molecular Dynamics package. It was designed for materials modeling but it is well prepared for simulations in Soft Matter. The use packages like LAMMPS has advantages and disadvantages. The main advantage is the optimization of the methods, mainly for parallel computing. The main disadvantage is that, due to the complexity of the code, it ha long learning curve…
▽ More
LAMMPS is a widely popular classical Molecular Dynamics package. It was designed for materials modeling but it is well prepared for simulations in Soft Matter. The use packages like LAMMPS has advantages and disadvantages. The main advantage is the optimization of the methods, mainly for parallel computing. The main disadvantage is that, due to the complexity of the code, it ha long learning curve. One purpose of these notes is to shorten that curve for researchers are starting to use LAMMPS to simulate soft active matter. In these notes, we first discuss some Molecular Dynamics methods implemented in LAMMPS. We present an hands-on introduction to first-time users and we finish with an advanced hands-on section, where we implement and test Active Brownian particles simulations.
△ Less
Submitted 24 February, 2021; v1 submitted 20 February, 2021;
originally announced February 2021.
-
Diffusive Operator Spreading for Random Unitary Free Fermion Circuits
Authors:
Beatriz C. Dias,
Masudul Haque,
Pedro Ribeiro,
Paul McClarty
Abstract:
We study a model of free fermions on a chain with dynamics generated by random unitary gates acting on nearest neighbor bonds and present an exact calculation of time-ordered and out-of-time-ordered correlators. We consider three distinct cases: the random circuit with spatio-temporal disorder (i) with and (ii) without particle number conservation and (iii) the particle non-conserving case with pu…
▽ More
We study a model of free fermions on a chain with dynamics generated by random unitary gates acting on nearest neighbor bonds and present an exact calculation of time-ordered and out-of-time-ordered correlators. We consider three distinct cases: the random circuit with spatio-temporal disorder (i) with and (ii) without particle number conservation and (iii) the particle non-conserving case with purely temporal disorder. In all three cases, temporal disorder causes diffusive operator spreading and $\sim\sqrt{t}$ entanglement growth. This is in sharp contrast to Anderson localization for the case of static disorder and with the ballistic behavior observed in both the clean case of Hamiltonian evolution and in fully random unitary quantum circuits.
△ Less
Submitted 19 February, 2021;
originally announced February 2021.
-
Weakening connections in heterogeneous mean-field models
Authors:
C. Dias,
M. O. Hase
Abstract:
Two versions of the susceptible-infected-susceptible epidemic model, which have different transmission rules, are analysed. Both models are considered on a weighted network to simulate a mitigation in the connection between the individuals. The analysis is performed through a heterogeneous mean-field approach on a scale-free network. For a suitable choice of the parameters, both models exhibit a p…
▽ More
Two versions of the susceptible-infected-susceptible epidemic model, which have different transmission rules, are analysed. Both models are considered on a weighted network to simulate a mitigation in the connection between the individuals. The analysis is performed through a heterogeneous mean-field approach on a scale-free network. For a suitable choice of the parameters, both models exhibit a positive infection threshold, when they share the same critical exponents associated with the behaviour of the prevalence against the infection rate. Nevertheless, when the infection threshold vanishes, the prevalence of these models display different algebraic decays to zero for low values of the infection rate.
△ Less
Submitted 9 February, 2021;
originally announced February 2021.
-
Ultrafast Momentum-Resolved Probing of Plasmon Thermal Dynamics with Free Electrons
Authors:
Vahagn Mkhitaryan,
Eduardo J. C. Dias,
Fabrizio Carbone,
F. Javier García de Abajo
Abstract:
Current advances in ultrafast electron microscopy make it possible to combine optical pumping of a nanostructure and electron beam probing with subångstrom and femtosecond spatiotemporal resolution. We present a theory predicting that this technique can reveal a rich out-of-equilibrium dynamics of plasmon excitations in graphene and graphite samples. In a disruptive departure from the traditional…
▽ More
Current advances in ultrafast electron microscopy make it possible to combine optical pumping of a nanostructure and electron beam probing with subångstrom and femtosecond spatiotemporal resolution. We present a theory predicting that this technique can reveal a rich out-of-equilibrium dynamics of plasmon excitations in graphene and graphite samples. In a disruptive departure from the traditional probing of nanoscale excitations based on the identification of spectral features in the transmitted electrons, we show that measurement of angle-resolved, energy-integrated inelastic electron scattering can trace the temporal evolution of plasmons in these structures and provide momentum-resolved mode identification, thus avoiding the need for highly-monochromatic electron beams and the use of electron spectrometers. This previously unexplored approach to study the ultrafast dynamics of optical excitations can be of interest to understand and manipulate polaritons in 2D semiconductors and other materials exhibiting a strong thermo-optical response.
△ Less
Submitted 17 November, 2020;
originally announced November 2020.
-
Wetting of a Solid Surface by Active Matter
Authors:
Pedro Neta,
Mykola Tasinkevych,
Margarida Telo da Gama,
Cristóvão Dias
Abstract:
A lattice model is used to study repulsive active particles at a planar surface. A rejection-free Kinetic Monte Carlo method is employed to characterize the wetting behaviour. The model predicts a mobility induced phase separation of active particles, and the bulk coexistence of dense liquid-like and dilute vapour-like steady states is determined. An "ensemble", with a varying number of particles,…
▽ More
A lattice model is used to study repulsive active particles at a planar surface. A rejection-free Kinetic Monte Carlo method is employed to characterize the wetting behaviour. The model predicts a mobility induced phase separation of active particles, and the bulk coexistence of dense liquid-like and dilute vapour-like steady states is determined. An "ensemble", with a varying number of particles, analogous to a grand canonical ensemble in equilibrium, is introduced. The formation and growth of the liquid film between the solid surface and the vapour phase is investigated. For all of the activities considered, the thickness of the adsorbed film exhibits a diverging behaviour as the system is brought towards coexistence from the vapour side, suggesting a complete wetting scenario along the full coexistence curve.
△ Less
Submitted 11 November, 2020;
originally announced November 2020.
-
Complete Coupling of Focused Light to Surface Polaritons
Authors:
Eduardo J. C. Dias,
F. Javier García de Abajo
Abstract:
Surface polaritons display short wavelengths compared to propagating light, thus enabling large spatial concentration and enhancement of electromagnetic energy. However, this wavelength mismatch is generally accompanied by poor light-to-polaritons coupling that limits potential applications in areas such as optical sensing and optoelectronics. Here, we address this problem by demonstrating that a…
▽ More
Surface polaritons display short wavelengths compared to propagating light, thus enabling large spatial concentration and enhancement of electromagnetic energy. However, this wavelength mismatch is generally accompanied by poor light-to-polaritons coupling that limits potential applications in areas such as optical sensing and optoelectronics. Here, we address this problem by demonstrating that a small scatterer placed at a suitable distance from a planar surface can produce complete coupling of a focused light beam to surface polaritons. We present rigorous theoretical results for light coupling to plasmons in silver films and graphene, as well as phonon polaritons in hexagonal boron nitride films. We further formulate detailed general prescriptions on the beam profile and particle response that are required to achieve maximum coupling, which we supplement by analytical calculations for dipolar scatterers and finite-size particles. Our results open a practical route to circumvent the long-standing photon-polariton wavelength mismatch problem in nanophotonics.
△ Less
Submitted 28 October, 2020;
originally announced October 2020.
-
How to design cell-mediated self-assembled colloidal scaffolds
Authors:
C. S. Dias,
C. A. Custodio,
G. C. Antunes,
M. M. Telo da Gama,
J. F. Mano,
N. A. M. Araujo
Abstract:
A critical step in tissue engineering is the design and synthesis of 3D biocompatible matrices (scaffolds) to support and guide the proliferation of cells and tissue growth. Most existing techniques rely on the processing of scaffolds under controlled conditions and then implanting them \textit{in vivo}, with questions related to biocompatibility and the implantation process that are still challen…
▽ More
A critical step in tissue engineering is the design and synthesis of 3D biocompatible matrices (scaffolds) to support and guide the proliferation of cells and tissue growth. Most existing techniques rely on the processing of scaffolds under controlled conditions and then implanting them \textit{in vivo}, with questions related to biocompatibility and the implantation process that are still challenging. As an alternative, it was proposed to assemble the scaffolds \textit{in loco} through the self-organization of colloidal particles mediated by cells. In this study, we combine experiments, particle-based simulations, and mean-field calculations to show that, in general, the size of the self-assembled scaffold scales with the cell-to-particle ratio. However, we found an optimal value of this ratio, for which the size of the scaffold is maximal when cell-cell adhesion is suppressed. These results suggest that the size and structure of the self-assembled scaffolds may be designed by tuning the adhesion between cells in the colloidal suspension.
△ Less
Submitted 15 June, 2020;
originally announced June 2020.
-
Optimal Number of Faces for Fast Self-Folding Kirigami
Authors:
H. P. M. Melo,
C. S. Dias,
N. A. M. Araujo
Abstract:
We study the spontaneous folding of a 2D template of microscopic panels into a 3D pyramid, driven by thermal fluctuations. Combining numerical simulations and analytical calculations, we find that the total folding time is a non-monotonic function of the number of faces, with a minimum for five faces. The motion of each face is consistent with a Brownian process and folding occurs through a sequen…
▽ More
We study the spontaneous folding of a 2D template of microscopic panels into a 3D pyramid, driven by thermal fluctuations. Combining numerical simulations and analytical calculations, we find that the total folding time is a non-monotonic function of the number of faces, with a minimum for five faces. The motion of each face is consistent with a Brownian process and folding occurs through a sequence of irreversible binding events that close edges between pairs of faces. The first edge closing is well-described by a first-passage process in 2D, with a characteristic time that decays with the number of faces. By contrast, the subsequent edge closings are all first-passage processes in 1D and so the time of the last one grows logarithmically with the number of faces. It is the interplay between these two different sets of events that explains the non-monotonic behavior. Implications in the self-folding of more complex structures are discussed.
△ Less
Submitted 17 May, 2020;
originally announced May 2020.
-
Smoluchowski equations for linker-mediated irreversible aggregation
Authors:
J. M. Tavares,
G. C. Antunes,
C. S. Dias,
M. M. Telo da Gama,
N. A. M. Araújo
Abstract:
In order to study linker-mediated aggregation of colloidal particles with limited valence, we combine kinetic Monte Carlo simulations and an approximate theory based on the Smoluchowski equations. We found that aggregation depends strongly on two parameters, the ratio of the number of linkers and particles and the ratio of their diffusion coefficients. These control parameters are absent in single…
▽ More
In order to study linker-mediated aggregation of colloidal particles with limited valence, we combine kinetic Monte Carlo simulations and an approximate theory based on the Smoluchowski equations. We found that aggregation depends strongly on two parameters, the ratio of the number of linkers and particles and the ratio of their diffusion coefficients. These control parameters are absent in single-species aggregation and provide a much greater variety and control of the resulting structures. We show that aggregation is non-trivial when two time scales of aggregation are present. Our aggregation dynamics theory is in qualitative and quantitative agreement with kinetic Monte Carlo simulations. Our results show how the optimal aggregation may be tuned through the ratio of the linkers and particles and that of the diffusion coefficients.
△ Less
Submitted 14 July, 2020; v1 submitted 16 April, 2020;
originally announced April 2020.
-
Fundamental Limits to the Coupling between Light and 2D Polaritons by Small Scatterers
Authors:
Eduardo J. C. Dias,
F. Javier García de Abajo
Abstract:
Polaritonic modes in two-dimensional van der Waals materials display short in-plane wavelengths compared with light in free space. As interesting as this may look from both fundamental and applied viewpoints, such large confinement is accompanied by poor in/out optical coupling, which severely limits the application of polaritons in practical devices. Here, we quantify the coupling strength betwee…
▽ More
Polaritonic modes in two-dimensional van der Waals materials display short in-plane wavelengths compared with light in free space. As interesting as this may look from both fundamental and applied viewpoints, such large confinement is accompanied by poor in/out optical coupling, which severely limits the application of polaritons in practical devices. Here, we quantify the coupling strength between light and 2D polaritons in both homogeneous and anisotropic films using accurate rigorous analytical methods. In particular, we obtain universal expressions for the cross sections associated with photon-polariton coupling by point and line defects, as well as with polariton extinction and scattering processes. Additionally, we find closed-form constraints that limit the maximum possible values of these cross sections. Specifically, the maximum photon-to-plasmon conversion efficiency in graphene is $\sim10^{-6}$ and $\sim10^{-4}$ for point and line scatterers sitting at its surface, respectively, when the plasmon and photon energies are comparable in magnitude. We further show that Mie resonators placed at an optimum distance from the film can boost light-to-polariton coupling to order unity. Our results bear fundamental interest for the development of 2D polaritonics and the design of applications based on these excitations.
△ Less
Submitted 6 February, 2019; v1 submitted 7 December, 2018;
originally announced December 2018.
-
Optimal number of linkers per monomer in linker-mediated aggregation
Authors:
G. C. Antunes,
C. S. Dias,
M. M. Telo da Gama,
N. A. M. Araújo
Abstract:
We study the dynamics of diffusion-limited irreversible aggregation of monomers, where bonds are mediated by linkers. We combine kinetic Monte Carlo simulations of a lattice model with a mean-field theory to study the dynamics when the diffusion of aggregates is negligible and only monomers diffuse. We find two values of the number of linkers per monomer which maximize the size of the largest aggr…
▽ More
We study the dynamics of diffusion-limited irreversible aggregation of monomers, where bonds are mediated by linkers. We combine kinetic Monte Carlo simulations of a lattice model with a mean-field theory to study the dynamics when the diffusion of aggregates is negligible and only monomers diffuse. We find two values of the number of linkers per monomer which maximize the size of the largest aggregate. We explain the existence of the two maxima based on the distribution of linkers per monomer. This observation is well described by a simple mean-field model. We also show that a relevant parameter is the ratio of the diffusion coefficients of monomers and linkers. In particular, when this ratio is close to ten, the two maxima merge at a single maximum.
△ Less
Submitted 30 May, 2019; v1 submitted 16 November, 2018;
originally announced November 2018.
-
Crossover from three- to six-fold symmetry of colloidal aggregates in circular traps
Authors:
T. Geigenfeind,
C. S. Dias,
M. M. Telo da Gama,
D. de las Heras,
N. A. M. Araújo
Abstract:
At sufficiently low temperatures and high densities, repulsive spherical particles in two-dimensions (2d) form close-packed structures with six-fold symmetry. By contrast, when the interparticle interaction has an attractive anisotropic component, the structure may exhibit the symmetry of the interaction. We consider a suspension of spherical particles interacting through an isotropic repulsive po…
▽ More
At sufficiently low temperatures and high densities, repulsive spherical particles in two-dimensions (2d) form close-packed structures with six-fold symmetry. By contrast, when the interparticle interaction has an attractive anisotropic component, the structure may exhibit the symmetry of the interaction. We consider a suspension of spherical particles interacting through an isotropic repulsive potential and a three-fold symmetric attractive interaction, confined in circular potential traps in 2d. We find that, due to the competition between the interparticle and the external potentials, the particles self-organize into structures with three- or six-fold symmetry, depending on the width of the traps. For intermediate trap widths, a core-shell structure is formed, where the core has six-fold symmetry and the shell is three-fold symmetric. When the width of the trap changes periodically in time, the symmetry of the colloidal structure also changes, but it does not necessarily follow that of the corresponding static trap.
△ Less
Submitted 12 September, 2018;
originally announced September 2018.
-
Probing Nonlocal Effects in Metals with Graphene Plasmons
Authors:
Eduardo J. C. Dias,
David Alcaraz Iranzo,
P. A. D. Gonçalves,
Yaser Hajati,
Yuliy V. Bludov,
Antti-Pekka Jauho,
N. Asger Mortensen,
Frank H. L. Koppens,
N. M. R. Peres
Abstract:
In this paper we analyze the effects of nonlocality on the optical properties of a system consisting of a thin metallic film separated from a graphene sheet by a hexagonal boron nitride (hBN) layer. We show that nonlocal effects in the metal have a strong impact on the spectrum of the surface plasmon-polaritons on graphene. If the graphene sheet is shaped into a grating, we show that the extinctio…
▽ More
In this paper we analyze the effects of nonlocality on the optical properties of a system consisting of a thin metallic film separated from a graphene sheet by a hexagonal boron nitride (hBN) layer. We show that nonlocal effects in the metal have a strong impact on the spectrum of the surface plasmon-polaritons on graphene. If the graphene sheet is shaped into a grating, we show that the extinction curves can be used to shed light on the importance of nonlocal effects in metals. Therefore, graphene surface plasmons emerge as a tool for probing nonlocal effects in metallic nanostructures, including thin metallic films. As a byproduct of our study, we show that nonlocal effects lead to smaller losses for the graphene plasmons than what is predicted by a local calculation. We show that these effects can be very well mimicked using a local theory with an effective spacer thickness larger than its actual value.
△ Less
Submitted 19 April, 2018; v1 submitted 17 April, 2018;
originally announced April 2018.
-
Probing the Ultimate Plasmon Confinement Limits with a Van der Waals heterostructure
Authors:
David Alcaraz Iranzo,
Sebastien Nanot,
Eduardo J. C. Dias,
Itai Epstein,
Cheng Peng,
Dmitri K. Efetov,
Mark B. Lundeberg,
Romain Parret,
Johann Osmond,
Jin-Yong Hong,
Jing Kong,
Dirk R. Englund,
Nuno M. R. Peres,
Frank H. L. Koppens
Abstract:
The ability to confine light into tiny spatial dimensions is important for applications such as microscopy, sensing and nanoscale lasers. While plasmons offer an appealing avenue to confine light, Landau damping in metals imposes a trade-off between optical field confinement and losses. We show that a graphene-insulator-metal heterostructure can overcome that trade-off, and demonstrate plasmon con…
▽ More
The ability to confine light into tiny spatial dimensions is important for applications such as microscopy, sensing and nanoscale lasers. While plasmons offer an appealing avenue to confine light, Landau damping in metals imposes a trade-off between optical field confinement and losses. We show that a graphene-insulator-metal heterostructure can overcome that trade-off, and demonstrate plasmon confinement down to the ultimate limit of the lengthscale of one atom. This is achieved by far-field excitation of plasmon modes squeezed into an atomically thin hexagonal boron nitride dielectric h-BN spacer between graphene and metal rods. A theoretical model which takes into account the non-local optical response of both graphene and metal is used to describe the results. These ultra-confined plasmonic modes, addressed with far-field light excitation, enables a route to new regimes of ultra-strong light-matter interactions.
△ Less
Submitted 3 April, 2018;
originally announced April 2018.
-
Dynamics of patchy particles in and out of equilibrium
Authors:
J. M. Tavares,
C. S. Dias,
N. A. M. Araújo,
M. M. Telo da Gama
Abstract:
We combine particle-based simulations, mean-field rate equations, and Wertheim's theory to study the dynamics of patchy particles in and out of equilibrium, at different temperatures and densities. We consider an initial random distribution of non-overlapping three-patch particles, with no bonds, and analyze the time evolution of the breaking and bonding rates of a single bond. We find that the as…
▽ More
We combine particle-based simulations, mean-field rate equations, and Wertheim's theory to study the dynamics of patchy particles in and out of equilibrium, at different temperatures and densities. We consider an initial random distribution of non-overlapping three-patch particles, with no bonds, and analyze the time evolution of the breaking and bonding rates of a single bond. We find that the asymptotic (equilibrium) dynamics differs from the initial (out of equilibrium) one. These differences are expected to depend on the initial conditions, temperature, and density.
△ Less
Submitted 30 October, 2017;
originally announced October 2017.
-
Annealing cycles and the self-organization of functionalized colloids
Authors:
Cristóvão S. Dias,
Nuno A. M. Araújo,
Margarida M. Telo da Gama
Abstract:
The self-assembly of functionalized (patchy) particles with directional interactions into target structures is still a challenge, despite the significant experimental advances on their synthesis. The self-assembly pathways are typically characterized by high energy barriers that hinder the access to stable (equilibrium) structures. A possible strategy to tackle this challenge is to perform anneali…
▽ More
The self-assembly of functionalized (patchy) particles with directional interactions into target structures is still a challenge, despite the significant experimental advances on their synthesis. The self-assembly pathways are typically characterized by high energy barriers that hinder the access to stable (equilibrium) structures. A possible strategy to tackle this challenge is to perform annealing cycles. By periodically switching on and off the inter-particle bonds, one expects to smooth-out the kinetic pathways and favor the assembly of targeted structures. Preliminary results have shown that the efficiency of annealing cycles depends strongly on their frequency. Here, we study numerically how this frequency-dependence scales with the strength of the directional interactions (size of the patch $σ$). We use analytical arguments to show that the scaling results from the statistics of a random walk in configurational space.
△ Less
Submitted 6 October, 2017;
originally announced October 2017.
-
Interaction anisotropy and the KPZ to KPZQ transition in particle deposition at the edges of drying drops
Authors:
Cristóvão Dias,
Peter Yunker,
Arjun Yodh,
Nuno Araújo,
Margarida Telo da Gama
Abstract:
The deposition process at the edge of evaporating colloidal drops varies with the shape of suspended particles. Experiments with prolate ellipsoidal particles suggest that the spatiotemporal properties of the deposit depend strongly on particle aspect ratio. As the aspect ratio increases, the particles form less densely-packed deposits and the statistical behavior of the deposit interface crosses…
▽ More
The deposition process at the edge of evaporating colloidal drops varies with the shape of suspended particles. Experiments with prolate ellipsoidal particles suggest that the spatiotemporal properties of the deposit depend strongly on particle aspect ratio. As the aspect ratio increases, the particles form less densely-packed deposits and the statistical behavior of the deposit interface crosses over from the Kardar-Parisi-Zhang (KPZ) universality class to another universality class which was suggested to be consistent with the KPZ plus quenched disorder. Here, we numerically study the effect of particle interaction anisotropy on deposit growth. In essence, we model the ellipsoids, at the interface, as disk-like particles with two types of interaction patches that correspond to specific features at the poles and equator of the ellipsoid. The numerical results corroborate experimental observations and further suggest that the deposition transition can stem from interparticle interaction anisotropy. Possible extensions of our model to other systems are also discussed.
△ Less
Submitted 7 September, 2017;
originally announced September 2017.
-
Controlling spoof plasmons in a metal grating using graphene surface plasmons
Authors:
Eduardo J. C. Dias,
N. M. R. Peres
Abstract:
Spoof plasmons mimic noble metal plasmons. The equivalent of the plasma frequency is an energy scale imposed by the geometry of the metal grating upon which they propagate. In this paper we show that the dispersion of spoof plasmons in the THz can be controlled placing a doped graphene sheet on the proximity of a metallic grating, adding more versatility to this type of system. We develop a semi-a…
▽ More
Spoof plasmons mimic noble metal plasmons. The equivalent of the plasma frequency is an energy scale imposed by the geometry of the metal grating upon which they propagate. In this paper we show that the dispersion of spoof plasmons in the THz can be controlled placing a doped graphene sheet on the proximity of a metallic grating, adding more versatility to this type of system. We develop a semi-analytical model, based on a perfect-metal diffraction grating. This model allows to reproduce well FDTD calculations for the same problem but with much less computer time. We discuss the optical properties of the system covering a spectral range spanning the interval from the THz to the mid-IR. It is shown that the system can be used as both a perfect absorber and a sensing device. For illustrating the latter property we have chosen different alcohols as analytes. The frequency at which perfect absorption appears can be controlled by the geometric parameters of the grating and by the value of the Fermi energy in graphene. The theoretical results predicted throughout this work can be verified experimentally in the future.
△ Less
Submitted 5 August, 2017;
originally announced August 2017.