-
Dislocation distribution, crystallographic texture evolution and plastic inhomogeneity of Inconel 718 fabricated by laser powder-bed fusion
Authors:
Jalal Al-Lami,
Thibaut Dessolier,
Talha Pirzada,
Minh-Son Pham
Abstract:
Plastic inhomogeneity, particularly localised strain, is one of the main mechanisms responsible for failures in engineering alloys. This work studied the spatial arrangement and distribution of microstructure and their influence in the plastic inhomogeneity of Inconel 718 fabricated by additive manufacturing (AM). In particular, the density and spatial distribution of geometrically necessary dislo…
▽ More
Plastic inhomogeneity, particularly localised strain, is one of the main mechanisms responsible for failures in engineering alloys. This work studied the spatial arrangement and distribution of microstructure and their influence in the plastic inhomogeneity of Inconel 718 fabricated by additive manufacturing (AM). In particular, the density and spatial distribution of geometrically necessary dislocations (GNDs) and the crystallographic texture components were examined in relation to the spatial plastic deformation. In-situ tensile testing coupled with microscopy and EBSD was performed to understand the evolution of the as-built microstructure and its effect on the spatial and temporal deformation behaviour. Bidirectional scan strategy with no interlayer rotation resulted in highly ordered alternating arrangements of coarse Goss-like {110}<001> textured grains separated by fine Cube-like {100}<001> textured grains. This strategy also resulted in an overall high density of dislocations (in particular GNDs) with a regular pattern: the fine grains contained very high GND density while the coarse grains contained less GNDs but they were oriented to be perpendicular to the scan direction. Although this strategy resulted in a dominant Cube texture that is desirable for isotropy, the Cube texture gradually weakened and the undesirable Goss component increased during plastic deformation. Together with the columnar grain morphology and aligned GND arrangement, such texture evolution caused intense plastic inhomogeneity during deformation. Replacing the bidirectional strategy with a chessboard strategy involving a 67° layer rotation resulted in a lower GND density and much more random distribution of crystallographic texture and GNDs, with a dominant Cube component (and lower Goss texture) that remained stable throughout plastic deformation, reducing the plastic inhomogeneity.
△ Less
Submitted 18 March, 2023;
originally announced March 2023.
-
Effect of high temperature service on the complex through-wall microstructure of centrifugally cast HP40 reformer tube
Authors:
Thibaut Dessolier,
Thomas McAuliffe,
Wouter J. Hamer,
Chrétien G. M. Hermse,
T. Ben Britton
Abstract:
Centrifugally cast reformer tubes are used in petrochemical plants for hydrogen production. Due to the conditions of hydrogen production, reformer tubes are exposed to high temperature which causes creep damage inside the microstructure. In this study, two different ex-service HP40 alloy reformer tubes which come from the same steam reformer unit have been compared by microstructural characterisat…
▽ More
Centrifugally cast reformer tubes are used in petrochemical plants for hydrogen production. Due to the conditions of hydrogen production, reformer tubes are exposed to high temperature which causes creep damage inside the microstructure. In this study, two different ex-service HP40 alloy reformer tubes which come from the same steam reformer unit have been compared by microstructural characterisation performed at a range of length scales from mm to um. Analyses performed by EBSD (Electron Backscatter Diffraction), EDS (Energy Dispersive X-ray Spectroscopy) and PCA (Principal Component Analysis) show that both tubes have similar microstructural constituents, with the presence of an austenitic matrix and M23C6, G phase and M6C carbides at the grain boundaries. Even if both tubes have a similar microstructure, one tube due to it localisation inside the steam reformer unit presents a region with more micro cracks which may indicate that this tube have accumulated more creep damage than the other one.
△ Less
Submitted 26 August, 2020; v1 submitted 17 August, 2020;
originally announced August 2020.
-
Effect of bed temperature on solute segregation and mechanical properties in Ti-6Al-4V produced by selective laser melting
Authors:
S. Pedrazzini,
M. E. Pek,
A. K. Ackerman,
Q. Cheng,
H. Ali,
H. Ghadbeigi,
K. Mumtaz,
T. Dessolier,
T. B. Britton,
P. Bajaj,
E. Jägle,
B. Gault,
A. J. London,
E. Galindo-Nava
Abstract:
Advanced characterisation techniques were used on LPBF Ti-6Al-4V samples produced on a heated base plate. When the substrate temperature is 100°C the elongation is 6\%, which increases and peaks at 10\% at 570°C, then sharply decreases to zero ductility at 770°C. At 100°C, a heavily strained and twinned microstructure, primarily composed of α+α', was observed and it was comparable to asbuilt micro…
▽ More
Advanced characterisation techniques were used on LPBF Ti-6Al-4V samples produced on a heated base plate. When the substrate temperature is 100°C the elongation is 6\%, which increases and peaks at 10\% at 570°C, then sharply decreases to zero ductility at 770°C. At 100°C, a heavily strained and twinned microstructure, primarily composed of α+α', was observed and it was comparable to asbuilt microstructures obtained by conventional LPBF methods. At higher temperatures, twins are no longer present and instead nano-scale β precipitates are observed within α' and α, as well as dislocation networks (570°C) and tangles (770°C). Solute segregation at crystal defects was observed in all pre-heating conditions. Al and V segregation at microtwins was observed in the 100°C sample, reporting for the first time `selective' and mutually exclusive Al- and V-rich regions forming in adjacent twins. V segregation at dislocations was observed in the 570°C and 770°C samples, consistent with the higher preheating temperatures. High O contents were measured in all samples but with apparent opposing effects. At 100°C and 570°C was estimated to be below the critical threshold for O embrittlement and locally aids in maintaining a strength high by solid solution strengthening, whereas at 770°C it was above the threshold, therefore failing in a brittle fashion. Based on these observations, the initial increase in ductility from 100°C to 570°C is attributed to a reduction in microtwins and the dislocation networks acting as `soft barriers' for slip within a coarser microstructure. The lack of ductility at 770°C was attributed to local solute redistribution causing dislocation pinning and an increase of O content in this sample.
△ Less
Submitted 1 December, 2020; v1 submitted 15 June, 2020;
originally announced June 2020.
