Showing 1–31 of 31 results for author: Deserno, M

Dynamics of active nematic defects on the surface of a sphere

Authors: Yi-Heng Zhang, Markus Deserno, Zhan-Chun Tu

Abstract: A nematic liquid crystal confined to the surface of a sphere exhibits topological defects of total charge $+2$ due to the topological constraint. In equilibrium, the nematic field forms four $+1/2$ defects, located at the corners of a regular tetrahedron inscribed within the sphere, since this minimizes the Frank elastic energy. If additionally the individual nematogens exhibit self-driven directi… ▽ More A nematic liquid crystal confined to the surface of a sphere exhibits topological defects of total charge $+2$ due to the topological constraint. In equilibrium, the nematic field forms four $+1/2$ defects, located at the corners of a regular tetrahedron inscribed within the sphere, since this minimizes the Frank elastic energy. If additionally the individual nematogens exhibit self-driven directional motion, the resulting active system creates large-scale flow that drives it out of equilibrium. In particular, the defects now follow complex dynamic trajectories which, depending on the strength of the active forcing, can be periodic (for weak forcing) or chaotic (for strong forcing). In this paper we derive an effective particle theory for this system, in which the topological defects are the degrees of freedom, whose exact equations of motion we subsequently determine. Numerical solutions of these equations confirm previously observed characteristics of their dynamics and clarify the role played by the time dependence of their global rotation. We also show that Onsager's variational principle offers an exceptionally transparent way to derive these dynamical equations, and we explain the defect mobility at the hydrodynamics level. △ Less

Submitted 20 July, 2020; v1 submitted 4 June, 2020; originally announced June 2020.

Comments: 16 pages, 7 figures

Journal ref: Phys. Rev. E 102, 012607 (2020)

Optimal coarse-grained site selection in elastic network models of biomolecules

Authors: Patrick Diggins IV, Changjiang Liu, Markus Deserno, Raffaello Potestio

Abstract: Elastic network models, simple structure-based representations of biomolecules where atoms interact via short-range harmonic potentials, provide great insight into a molecule's internal dynamics and mechanical properties at extremely low computational cost. Their efficiency and effectiveness have made them a pivotal instrument in the computer-aided study of proteins and, since a few years, also of… ▽ More Elastic network models, simple structure-based representations of biomolecules where atoms interact via short-range harmonic potentials, provide great insight into a molecule's internal dynamics and mechanical properties at extremely low computational cost. Their efficiency and effectiveness have made them a pivotal instrument in the computer-aided study of proteins and, since a few years, also of nucleic acids. In general, the coarse-grained sites, i.e. those effective force centres onto which the all-atom structure is mapped, are constructed based on intuitive rules: a typical choice for proteins is to retain only the C$_α$ atoms of each amino acid. However, a mapping strategy relying only on the atom type and not the local properties of its embedding can be suboptimal compared to a more careful selection. Here we present a strategy in which the subset of atoms, each of which is mapped onto a unique coarse-grained site of the model, is selected in a stochastic search aimed at optimising a cost function. The latter is taken to be a simple measure of the consistency between the harmonic approximation of an elastic network model and the harmonic model obtained through exact integration of the discarded degrees of freedom. The method is applied to two representatives of structurally very different types of biomolecules: the protein Adenylate kinase and the RNA molecule adenine riboswitch. Our analysis quantifies the substantial impact that an algorithm-driven selection of coarse-grained sites can have on a model's properties. △ Less

Submitted 11 December, 2018; v1 submitted 18 June, 2018; originally announced June 2018.

Cylindrical confinement of semiflexible polymers

Authors: Pablo Vázquez-Montejo, Zachary McDargh, Markus Deserno, Jemal Guven

Abstract: Equilibrium states of a closed semiflexible polymer binding to a cylinder are described. This may be either by confinement or by constriction. Closed completely bound states are labeled by two integers: the number of oscillations, $n$, and the number of times it winds the cylinder, $p$, the latter a topological invariant. We examine the behavior of these states as the length of the loop is increas… ▽ More Equilibrium states of a closed semiflexible polymer binding to a cylinder are described. This may be either by confinement or by constriction. Closed completely bound states are labeled by two integers: the number of oscillations, $n$, and the number of times it winds the cylinder, $p$, the latter a topological invariant. We examine the behavior of these states as the length of the loop is increased by evaluating the energy, the conserved axial torque and the contact force. The ground state for a given $p$ is the state with $n=1$; a short loop with $p=1$ is an elliptic deformation of a parallel; as its length increases it elongates along the cylinder axis, with two hairpin ends. Excited states with $n\geq2$ and $p=1$ possess $n$-fold axial symmetry. Short (long) loops possess energies $\approx p E_0$ ($nE_0$), with $E_0$ the energy of a circular loop with same radius as the cylinder; in long loops the axial torque vanishes. Confined bound excited states are initially unstable; however, above a critical length each $n$-fold state becomes stable: the folded hairpin cannot be unfolded. The ground state for each $p$ is also initially unstable with respect to deformations rotating the loop off the surface into the interior. A closed planar elastic curve aligned along the cylinder axis making contact with the cylinder on its two sides is identified as the ground state of a confined loop. Exterior bound states behave very differently, if free to unbind, as signaled by the reversal in the sign of the contact force. If $p=1$, all such states are unstable. If $p \geq 2$, however, a topological obstruction to complete unbinding exists. If the loop is short, the bound state with $p=2$ and $n=1$ provides a stable constriction of the cylinder, partially unbinding as the length is increased. This motif could be relevant to an understanding of the process of membrane fission mediated by dynamin rings. △ Less

Submitted 16 November, 2017; v1 submitted 3 March, 2015; originally announced March 2015.

Comments: 33 pages, 16 figures

Journal ref: Phys. Rev. E 91, 063203 (2015)

Computational studies of biomembrane systems: Theoretical considerations, simulation models, and applications

Authors: Markus Deserno, Kurt Kremer, Harald Paulsen, Christine Peter, Friederike Schmid

Abstract: This chapter summarizes several approaches combining theory, simulation and experiment that aim for a better understanding of phenomena in lipid bilayers and membrane protein systems, covering topics such as lipid rafts, membrane mediated interactions, attraction between transmembrane proteins, and aggregation in biomembranes leading to large superstructures such as the light harvesting complex of… ▽ More This chapter summarizes several approaches combining theory, simulation and experiment that aim for a better understanding of phenomena in lipid bilayers and membrane protein systems, covering topics such as lipid rafts, membrane mediated interactions, attraction between transmembrane proteins, and aggregation in biomembranes leading to large superstructures such as the light harvesting complex of green plants. After a general overview of theoretical considerations and continuum theory of lipid membranes we introduce different options for simulations of biomembrane systems, addressing questions such as: What can be learned from generic models? When is it expedient to go beyond them? And what are the merits and challenges for systematic coarse graining and quasi-atomistic coarse grained models that ensure a certain chemical specificity? △ Less

Submitted 16 December, 2014; originally announced December 2014.

Journal ref: Advances in Polymer Science 260, 237 (2014)

Effective field theory approach to fluctuation-induced forces between colloids at an interface

Authors: Cem Yolcu, Ira Z. Rothstein, Markus Deserno

Abstract: We discuss an effective field theory (EFT) approach to the computation of fluctuation-induced interactions between particles bound to a thermally fluctuating fluid surface controlled by surface tension. By describing particles as points, EFT avoids computing functional integrals subject to difficult constraints. Still, all information pertaining to particle size and shape is systematically restore… ▽ More We discuss an effective field theory (EFT) approach to the computation of fluctuation-induced interactions between particles bound to a thermally fluctuating fluid surface controlled by surface tension. By describing particles as points, EFT avoids computing functional integrals subject to difficult constraints. Still, all information pertaining to particle size and shape is systematically restored by amending the surface Hamiltonian with a derivative expansion. The free energy is obtained as a cumulant expansion, for which straightforward techniques exist. We derive a complete description for rigid axisymmetric objects, which allows us to develop a full asymptotic expansion in powers of the inverse distance for the pair interaction. We also demonstrate by a few examples the efficiency with which multibody interactions can be computed. Moreover, although the main advantage of the EFT approach lies in explicit computation, we discuss how one can infer certain features of cases involving flexible or anisotropic objects. The EFT description also permits a systematic computation of ground-state surface-mediated interactions, which we illustrate with a few examples. △ Less

Submitted 16 November, 2012; originally announced November 2012.

Journal ref: Phys. Rev. E 85, 011140 (2012)

Structural Basis of Folding Cooperativity in Model Proteins: Insights from a Microcanonical Perspective

Authors: Tristan Bereau, Markus Deserno, Michael Bachmann

Abstract: Two-state cooperativity is an important characteristic in protein folding. It is defined by a depletion of states lying energetically between folded and unfolded conformations. While there are different ways to test for two-state cooperativity, most of them probe indirect proxies of this depletion. Yet, generalized-ensemble computer simulations allow to unambiguously identify this transition by a… ▽ More Two-state cooperativity is an important characteristic in protein folding. It is defined by a depletion of states lying energetically between folded and unfolded conformations. While there are different ways to test for two-state cooperativity, most of them probe indirect proxies of this depletion. Yet, generalized-ensemble computer simulations allow to unambiguously identify this transition by a microcanonical analysis on the basis of the density of states. Here we perform a detailed characterization of several helical peptides using coarse-grained simulations. The level of resolution of the coarse-grained model allows to study realistic structures ranging from small alpha-helices to a de novo three-helix bundle - without biasing the force field toward the native state of the protein. Linking thermodynamic and structural features shows that while short alpha-helices exhibit two-state cooperativity, the type of transition changes for longer chain lengths because the chain forms multiple helix nucleation sites, stabilizing a significant population of intermediate states. The helix bundle exhibits the signs of two-state cooperativity owing to favorable helix-helix interactions, as predicted from theoretical models. The detailed analysis of secondary and tertiary structure formation fits well into the framework of several folding mechanisms and confirms features observed so far only in lattice models. △ Less

Submitted 1 July, 2011; originally announced July 2011.

Comments: 28 pages, 7 figures

Journal ref: Biophys. J. 100, 2764-2772 (2011)

Interplay between Secondary and Tertiary Structure Formation in Protein Folding Cooperativity

Authors: Tristan Bereau, Michael Bachmann, Markus Deserno

Abstract: Protein folding cooperativity is defined by the nature of the finite-size thermodynamic transition exhibited upon folding: two-state transitions show a free energy barrier between the folded and unfolded ensembles, while downhill folding is barrierless. A microcanonical analysis, where the energy is the natural variable, has shown better suited to unambiguously characterize the nature of the trans… ▽ More Protein folding cooperativity is defined by the nature of the finite-size thermodynamic transition exhibited upon folding: two-state transitions show a free energy barrier between the folded and unfolded ensembles, while downhill folding is barrierless. A microcanonical analysis, where the energy is the natural variable, has shown better suited to unambiguously characterize the nature of the transition compared to its canonical counterpart. Replica exchange molecular dynamics simulations of a high resolution coarse-grained model allow for the accurate evaluation of the density of states, in order to extract precise thermodynamic information, and measure its impact on structural features. The method is applied to three helical peptides: a short helix shows sharp features of a two-state folder, while a longer helix and a three-helix bundle exhibit downhill and two-state transitions, respectively. Extending the results of lattice simulations and theoretical models, we find that it is the interplay between secondary structure and the loss of non-native tertiary contacts which determines the nature of the transition. △ Less

Submitted 1 July, 2011; originally announced July 2011.

Comments: 3 pages, 3 figures

Journal ref: J. Am. Chem. Soc. 132, 13129-13131 (2010)

Effective field theory approach to Casimir interactions on soft matter surfaces

Authors: Cem Yolcu, Ira Z. Rothstein, Markus Deserno

Abstract: We utilize an effective field theory approach to calculate Casimir interactions between objects bound to thermally fluctuating fluid surfaces or interfaces. This approach circumvents the complicated constraints imposed by such objects on the functional integration measure by reverting to a point particle representation. To capture the finite size effects, we perturb the Hamiltonian by DH that enca… ▽ More We utilize an effective field theory approach to calculate Casimir interactions between objects bound to thermally fluctuating fluid surfaces or interfaces. This approach circumvents the complicated constraints imposed by such objects on the functional integration measure by reverting to a point particle representation. To capture the finite size effects, we perturb the Hamiltonian by DH that encapsulates the particles' response to external fields. DH is systematically expanded in a series of terms, each of which scales homogeneously in the two power counting parameters: λ\equiv R/r, the ratio of the typical object size (R) to the typical distance between them (r), and delta=kB T/k, where k is the modulus characterizing the surface energy. The coefficients of the terms in DH correspond to generalized polarizabilities and thus the formalism applies to rigid as well as deformable objects. Singularities induced by the point particle description can be dealt with using standard renormalization techniques. We first illustrate and verify our approach by re-deriving known pair forces between circular objects bound to films or membranes. To demonstrate its efficiency and versatility, we then derive a number of new results: The triplet interactions present in these systems, a higher order correction to the film interaction, and general scaling laws for the leading order interaction valid for objects of arbitrary shape and internal flexibility. △ Less

Submitted 27 July, 2010; originally announced July 2010.

Comments: 4 pages, 1 figure

Contact lines for fluid surface adhesion

Authors: Markus Deserno, Martin M. Mueller, Jemal Guven

Abstract: When a fluid surface adheres to a substrate, the location of the contact line adjusts in order to minimize the overall energy. This adhesion balance implies boundary conditions which depend on the characteristic surface deformation energies. We develop a general geometrical framework within which these conditions can be systematically derived. We treat both adhesion to a rigid substrate as well… ▽ More When a fluid surface adheres to a substrate, the location of the contact line adjusts in order to minimize the overall energy. This adhesion balance implies boundary conditions which depend on the characteristic surface deformation energies. We develop a general geometrical framework within which these conditions can be systematically derived. We treat both adhesion to a rigid substrate as well as adhesion between two fluid surfaces, and illustrate our general results for several important Hamiltonians involving both curvature and curvature gradients. Some of these have previously been studied using very different techniques, others are to our knowledge new. What becomes clear in our approach is that, except for capillary phenomena, these boundary conditions are not the manifestation of a local force balance, even if the concept of surface stress is properly generalized. Hamiltonians containing higher order surface derivatives are not just sensitive to boundary translations but also notice changes in slope or even curvature. Both the necessity and the functional form of the corresponding additional contributions follow readily from our treatment. △ Less

Submitted 1 March, 2007; originally announced March 2007.

Comments: 8 pages, 2 figures, LaTeX, RevTeX style

Journal ref: Phys. Rev. E 76 (1), 011605 (2007)

Balancing torques in membrane-mediated interactions: Exact results and numerical illustrations

Authors: Martin Michael Mueller, Markus Deserno, Jemal Guven

Abstract: Torques on interfaces can be described by a divergence-free tensor which is fully encoded in the geometry. This tensor consists of two terms, one originating in the couple of the stress, the other capturing an intrinsic contribution due to curvature. In analogy to the description of forces in terms of a stress tensor, the torque on a particle can be expressed as a line integral along any contour… ▽ More Torques on interfaces can be described by a divergence-free tensor which is fully encoded in the geometry. This tensor consists of two terms, one originating in the couple of the stress, the other capturing an intrinsic contribution due to curvature. In analogy to the description of forces in terms of a stress tensor, the torque on a particle can be expressed as a line integral along any contour surrounding the particle. Interactions between particles mediated by a fluid membrane are studied within this framework. In particular, torque balance places a strong constraint on the shape of the membrane. Symmetric two-particle configurations admit simple analytical expressions which are valid in the fully nonlinear regime; in particular, the problem may be solved exactly in the case of two membrane-bound parallel cylinders. This apparently simple system provides some flavor of the remarkably subtle nonlinear behavior associated with membrane-mediated interactions. △ Less

Submitted 27 April, 2007; v1 submitted 14 February, 2007; originally announced February 2007.

Comments: 16 pages, 10 figures, REVTeX4 style. The Gaussian curvature term was included in the membrane Hamiltonian; section II.B was rephrased to smoothen the flow of presentation

Journal ref: Phys. Rev. E 76 (1), 011921 (2007)

A novel method for measuring the bending rigidity of model lipid membranes by simulating tethers

Authors: Vagelis A. Harmandaris, Markus Deserno

Abstract: The tensile force along a cylindrical lipid bilayer tube is proportional to the membrane's bending modulus and inversely proportional to the tube radius. We show that this relation, which is experimentally exploited to measure bending rigidities, can be applied with even greater ease in computer simulations. Using a coarse-grained bilayer model we efficiently obtain bending rigidities that compa… ▽ More The tensile force along a cylindrical lipid bilayer tube is proportional to the membrane's bending modulus and inversely proportional to the tube radius. We show that this relation, which is experimentally exploited to measure bending rigidities, can be applied with even greater ease in computer simulations. Using a coarse-grained bilayer model we efficiently obtain bending rigidities that compare very well with complementary measurements based on an analysis of thermal undulation modes. We furthermore illustrate that no deviations from simple quadratic continuum theory occur up to a radius of curvature comparable to the bilayer thickness. △ Less

Submitted 2 November, 2006; v1 submitted 1 November, 2006; originally announced November 2006.

Comments: 7 pages, 5 figures, 1 table

How to determine local elastic properties of lipid bilayer membranes from atomic-force-microscope measurements: A theoretical analysis

Authors: Davood Norouzi, Martin Michael Mueller, Markus Deserno

Abstract: Measurements with an atomic force microscope (AFM) offer a direct way to probe elastic properties of lipid bilayer membranes locally: provided the underlying stress-strain relation is known, material parameters such as surface tension or bending rigidity may be deduced. In a recent experiment a pore-spanning membrane was poked with an AFM tip, yielding a linear behavior of the force-indentation… ▽ More Measurements with an atomic force microscope (AFM) offer a direct way to probe elastic properties of lipid bilayer membranes locally: provided the underlying stress-strain relation is known, material parameters such as surface tension or bending rigidity may be deduced. In a recent experiment a pore-spanning membrane was poked with an AFM tip, yielding a linear behavior of the force-indentation curves. A theoretical model for this case is presented here which describes these curves in the framework of Helfrich theory. The linear behavior of the measurements is reproduced if one neglects the influence of adhesion between tip and membrane. Including it via an adhesion balance changes the situation significantly: force-distance curves cease to be linear, hysteresis and nonzero detachment forces can show up. The characteristics of this rich scenario are discussed in detail in this article. △ Less

Submitted 13 November, 2006; v1 submitted 28 February, 2006; originally announced February 2006.

Comments: 14 pages, 9 figures, REVTeX4 style. New version corresponds to the one accepted by PRE. The result section is restructured: a comparison to experimental findings is included; the discussion on the influence of adhesion between AFM tip and membrane is extended

Journal ref: Phys. Rev. E 74, 061914 (2006)

Solvent free model for self-assembling fluid bilayer membranes: Stabilization of the fluid phase based on broad attractive tail potentials

Authors: I. R. Cooke, M. Deserno

Abstract: We present a simple and highly adaptable method for simulating coarse-grained lipid membranes without explicit solvent. Lipids are represented by one head-bead and two tail-beads, with the interaction between tails being of key importance in stabilizing the fluid phase. Two such tail-tail potentials were tested, with the important feature in both cases being a variable range of attraction. We ex… ▽ More We present a simple and highly adaptable method for simulating coarse-grained lipid membranes without explicit solvent. Lipids are represented by one head-bead and two tail-beads, with the interaction between tails being of key importance in stabilizing the fluid phase. Two such tail-tail potentials were tested, with the important feature in both cases being a variable range of attraction. We examined phase diagrams of this range versus temperature for both functional forms of the tail-tail attraction and found that a certain threshold attractive width was required to stabilize the fluid phase. Within the fluid phase region we find that material properties such as area per lipid, orientational order, diffusion constant, inter-leaflet flip-flop rate and bilayer stiffness all depend strongly and monotonically on the attractive width. For three particular values of the potential width we investigate the transition between gel and fluid phases via heating or cooling and find that this transition is discontinuous with considerable hysteresis. We also investigated the stretching of a bilayer to eventually form a pore and found excellent agreement with a recently published analytic theory. △ Less

Submitted 8 September, 2005; originally announced September 2005.

Comments: 14 pages 12 figures

Interface mediated interactions between particles -- a geometrical approach

Authors: Martin Michael Mueller, Markus Deserno, Jemal Guven

Abstract: Particles bound to an interface interact because they deform its shape. The stresses that result are fully encoded in the geometry and described by a divergence-free surface stress tensor. This stress tensor can be used to express the force on a particle as a line integral along any conveniently chosen closed contour that surrounds the particle. The resulting expression is exact (i.e., free of a… ▽ More Particles bound to an interface interact because they deform its shape. The stresses that result are fully encoded in the geometry and described by a divergence-free surface stress tensor. This stress tensor can be used to express the force on a particle as a line integral along any conveniently chosen closed contour that surrounds the particle. The resulting expression is exact (i.e., free of any "smallness" assumptions) and independent of the chosen surface parametrization. Additional surface degrees of freedom, such as vector fields describing lipid tilt, are readily included in this formalism. As an illustration, we derive the exact force for several important surface Hamiltonians in various symmetric two-particle configurations in terms of the midplane geometry; its sign is evident in certain interesting limits. Specializing to the linear regime, where the shape can be analytically determined, these general expressions yield force-distance relations, several of which have originally been derived by using an energy based approach. △ Less

Submitted 1 March, 2006; v1 submitted 1 June, 2005; originally announced June 2005.

Comments: 18 pages, 7 figures, REVTeX4 style; final version, as appeared in Phys. Rev. E. Compared to v2 several minor mistakes, as well as one important minus sign in Eqn. (18a) have been cured. Compared to v1, this version is significantly extended: Lipid tilt degrees of freedom for membranes are included in the stress framework, more technical details are given, estimates for the magnitude of forces are made

Journal ref: Phys. Rev. E_72_, 061407 (2005)

Efficient tunable generic model for fluid bilayer membranes

Authors: Ira R. Cooke, Kurt Kremer, Markus Deserno

Abstract: We present a model for the efficient simulation of generic bilayer membranes. Individual lipids are represented by one head- and two tail-beads. By means of simple pair potentials these robustly self-assemble to a fluid bilayer state over a wide range of parameters, without the need for an explicit solvent. The model shows the expected elastic behavior on large length scales, and its physical pr… ▽ More We present a model for the efficient simulation of generic bilayer membranes. Individual lipids are represented by one head- and two tail-beads. By means of simple pair potentials these robustly self-assemble to a fluid bilayer state over a wide range of parameters, without the need for an explicit solvent. The model shows the expected elastic behavior on large length scales, and its physical properties (eg fluidity or bending stiffness) can be widely tuned via a single parameter. In particular, bending rigidities in the experimentally relevant range are obtained, at least within $3-30 k_{\text{B}}T$. The model is naturally suited to study many physical topics, including self-assembly, fusion, bilayer melting, lipid mixtures, rafts, and protein-bilayer interactions. △ Less

Submitted 17 February, 2005; originally announced February 2005.

Comments: 4 Pages 4 Figures

Geometry of surface mediated interactions

Authors: Martin Michael Mueller, Markus Deserno, Jemal Guven

Abstract: Soft interfaces can mediate interactions between particles bound to them. The force transmitted through the surface geometry on a particle may be expressed as a closed line integral of the surface stress tensor around that particle. This contour may be deformed to exploit the symmetries present; for two identical particles, one obtains an exact expression for the force between them in terms of t… ▽ More Soft interfaces can mediate interactions between particles bound to them. The force transmitted through the surface geometry on a particle may be expressed as a closed line integral of the surface stress tensor around that particle. This contour may be deformed to exploit the symmetries present; for two identical particles, one obtains an exact expression for the force between them in terms of the local surface geometry of their mid-plane; in the case of a fluid membrane the sign of the interaction is often evident. The approach, by construction, is adapted directly to the surface and is independent of its parameterization. Furthermore, it is applicable for arbitrarily large deformations; in particular, it remains valid beyond the linear small-gradient regime. △ Less

Submitted 17 December, 2004; v1 submitted 2 September, 2004; originally announced September 2004.

Comments: 7 pages, 2 figures, 1 table, Europhysics Letters style. New version corresponds to the one accepted by EPL. More explanations are added on some differential geometric topics; a mistake in footnote [18] and a missing prefactor of 1/2 in the last row of the Table has been fixed

Journal ref: Europhys. Lett., 69 (3), pp. 482-488 (2005)

Screening of Spherical Colloids beyond Mean Field -- A Local Density Functional Approach

Authors: Marcia C. Barbosa, Markus Deserno, Christian Holm, Rene Messina

Abstract: We study the counterion distribution around a spherical macroion and its osmotic pressure in the framework of the recently developed Debye-H"uckel-Hole-Cavity (DHHC) theory. This is a local density functional approach which incorporates correlations into Poisson-Boltzmann theory by adding a free energy correction based on the One Component Plasma. We compare the predictions for ion distribution… ▽ More We study the counterion distribution around a spherical macroion and its osmotic pressure in the framework of the recently developed Debye-H"uckel-Hole-Cavity (DHHC) theory. This is a local density functional approach which incorporates correlations into Poisson-Boltzmann theory by adding a free energy correction based on the One Component Plasma. We compare the predictions for ion distribution and osmotic pressure obtained by the full theory and by its zero temperature limit with Monte Carlo simulations. They agree excellently for weakly developed correlations and give the correct trend for stronger ones. In all investigated cases the DHHC theory and its computationally simpler zero temperature limit yield better results than the Poisson-Boltzmann theory. △ Less

Submitted 18 December, 2003; originally announced December 2003.

Comments: 10 pages, 4 figures, 2 tables, RevTeX4-style

Twist-bend instability for toroidal DNA condensates

Authors: Igor M. Kulic, Denis Andrienko, Markus Deserno

Abstract: We propose that semiflexible polymers in poor solvent collapse in two stages. The first stage is the well known formation of a dense toroidal aggregate. However, if the solvent is sufficiently poor, the condensate will undergo a second structural transition to a twisted entangled state, in which individual filaments lower their bending energy by additionally orbiting around the mean path along w… ▽ More We propose that semiflexible polymers in poor solvent collapse in two stages. The first stage is the well known formation of a dense toroidal aggregate. However, if the solvent is sufficiently poor, the condensate will undergo a second structural transition to a twisted entangled state, in which individual filaments lower their bending energy by additionally orbiting around the mean path along which they wind. This ``topological ripening'' is consistent with known simulations and experimental results. It connects and rationalizes various experimental observations ranging from strong DNA entanglement in viral capsids to the unusually short pitch of the cholesteric phase of DNA in sperm-heads. We propose that topological ripening of DNA toroids could improve the efficiency and stability of gene delivery. △ Less

Submitted 8 December, 2003; originally announced December 2003.

Comments: 4 pages, 3 figures, RevTeX4 style

Elastic deformation of a fluid membrane upon colloid binding

Authors: Markus Deserno

Abstract: When a colloidal particle adheres to a fluid membrane, it induces elastic deformations in the membrane which oppose its own binding. The structural and energetic aspects of this balance are theoretically studied within the framework of a Helfrich Hamiltonian. Based on the full nonlinear shape equations for the membrane profile, a line of continuous binding transitions and a second line of discon… ▽ More When a colloidal particle adheres to a fluid membrane, it induces elastic deformations in the membrane which oppose its own binding. The structural and energetic aspects of this balance are theoretically studied within the framework of a Helfrich Hamiltonian. Based on the full nonlinear shape equations for the membrane profile, a line of continuous binding transitions and a second line of discontinuous envelopment transitions are found, which meet at an unusual triple point. The regime of low tension is studied analytically using a small gradient expansion, while in the limit of large tension scaling arguments are derived which quantify the asymptotic behavior of phase boundary, degree of wrapping, and energy barrier. The maturation of animal viruses by budding is discussed as a biological example of such colloid-membrane interaction events. △ Less

Submitted 31 March, 2003; originally announced March 2003.

Comments: 14 pages, 9 figures, REVTeX style, follow-up on cond-mat/0212421

Wrapping of a spherical colloid by a fluid membrane

Authors: Markus Deserno, Thomas Bickel

Abstract: We theoretically study the elastic deformation of a fluid membrane induced by an adhering spherical colloidal particle within the framework of a Helfrich energy. Based on a full optimization of the membrane shape we find a continuous binding and a discontinuous envelopment transition, the latter displaying a potentially substantial energy barrier. A small gradient approximation permits membrane… ▽ More We theoretically study the elastic deformation of a fluid membrane induced by an adhering spherical colloidal particle within the framework of a Helfrich energy. Based on a full optimization of the membrane shape we find a continuous binding and a discontinuous envelopment transition, the latter displaying a potentially substantial energy barrier. A small gradient approximation permits membrane shape and complex energy to be calculated analytically. While this only leads to a good representation of the complex geometry for very small degrees of wrapping, it still gives the correct phase boundaries in the regime of low tension. △ Less

Submitted 17 December, 2002; originally announced December 2002.

Comments: 5 pages, 5 figures, RevTeX style

Attraction and ionic correlations between charged stiff polyelectrolytes

Authors: Markus Deserno, Axel Arnold, Christian Holm

Abstract: We use Molecular Dynamics simulations to study attractive interactions and the underlying ionic correlations between parallel like-charged rods in the absence of additional salt. For a generic bulk system of rods we identify a reduction of short range repulsions as the origin of a negative osmotic coefficient. The counterions show signs of a weak three-dimensional order in the attractive regime… ▽ More We use Molecular Dynamics simulations to study attractive interactions and the underlying ionic correlations between parallel like-charged rods in the absence of additional salt. For a generic bulk system of rods we identify a reduction of short range repulsions as the origin of a negative osmotic coefficient. The counterions show signs of a weak three-dimensional order in the attractive regime only once the rod-imposed charge-inhomogeneities are divided out. We also treat the case of attraction between a single pair of rods for a few selected line charge densities and rod radii. Measurements of the individual contributions to the force between close rods are studied as a function of Bjerrum length. We find that even though the total force is always attractive at sufficiently high Bjerrum length, the electrostatic contribution can ultimately become repulsive. We also measure azimuthal and longitudinal correlation functions to answer the question how condensed ions are distributed with respect to each other and to the neighboring rod. For instance, we show that the prevalent image of mutually interlocked ions is qualitatively correct, even though modifications due to thermal fluctuations are usually strong. △ Less

Submitted 10 June, 2002; originally announced June 2002.

Comments: 14 pages, 14 figures, REVTeX4 style

Theory and simulations of rigid polyelectrolytes

Authors: Markus Deserno, Christian Holm

Abstract: We present theoretical and numerical studies on stiff, linear polyelectrolytes within the framework of the cell model. We first review analytical results obtained on a mean-field Poisson-Boltzmann level, and then use molecular dynamics simulations to show, under which circumstances these fail quantitatively and qualitatively. For the hexagonally packed nematic phase of the polyelectrolytes we co… ▽ More We present theoretical and numerical studies on stiff, linear polyelectrolytes within the framework of the cell model. We first review analytical results obtained on a mean-field Poisson-Boltzmann level, and then use molecular dynamics simulations to show, under which circumstances these fail quantitatively and qualitatively. For the hexagonally packed nematic phase of the polyelectrolytes we compute the osmotic coefficient as a function of density. In the presence of multivalent counterions it can become negative, leading to effective attractions. We show that this results from a reduced contribution of the virial part to the pressure. We compute the osmotic coefficient and ionic distribution functions from Poisson-Boltzmann theory with and without a recently proposed correlation correction, and also simulation results for the case of poly(para-phenylene) and compare it to recently obtained experimental data on this stiff polyelectrolyte. We also investigate ion-ion correlations in the strong coupling regime, and compare them to predictions of the recently advocated Wigner crystal theories. △ Less

Submitted 28 March, 2002; originally announced March 2002.

Comments: 32 pages, 15 figures, proceedings of the ASTATPHYS-MEX-2001, to be published in Mol. Phys

Journal ref: Molecular Physics 100, 2941-2956 (2002).

The osmotic pressure of charged colloidal suspensions: A unified approach to linearized Poisson-Boltzmann theory

Authors: Markus Deserno, Hans-Hennig von Grunberg

Abstract: We study theoretically the osmotic pressure of a suspension of charged objects (e.g., colloids, polyelectrolytes, clay platelets, etc.) dialyzed against an electrolyte solution using the cell model and linear Poisson-Boltzmann (PB) theory. From the volume derivative of the grand potential functional of linear theory we obtain two novel expressions for the osmotic pressure in terms of the potenti… ▽ More We study theoretically the osmotic pressure of a suspension of charged objects (e.g., colloids, polyelectrolytes, clay platelets, etc.) dialyzed against an electrolyte solution using the cell model and linear Poisson-Boltzmann (PB) theory. From the volume derivative of the grand potential functional of linear theory we obtain two novel expressions for the osmotic pressure in terms of the potential- or ion-profiles, neither of which coincides with the expression known from nonlinear PB theory, namely, the density of microions at the cell boundary. We show that the range of validity of linearization depends strongly on the linearization point and proof that expansion about the selfconsistently determined average potential is optimal in several respects. For instance, screening inside the suspension is automatically described by the actual ionic strength, resulting in the correct asymptotics at high colloid concentration. Together with the analytical solution of the linear PB equation for cell models of arbitrary dimension and electrolyte composition explicit and very general formulas for the osmotic pressure ensue. A comparison with nonlinear PB theory is provided. Our analysis also shows that whether or not linear theory predicts a phase separation depends crucially on the precise definition of the pressure, showing that an improper choice could predict an artificial phase separation in systems as important as DNA in physiological salt solution. △ Less

Submitted 1 February, 2002; originally announced February 2002.

Comments: 16 pages, 5 figures, REVTeX4 style

Cell model and Poisson-Boltzmann theory: A brief introduction

Authors: Markus Deserno, Christian Holm

Abstract: The cell-model and its treatment on the Poisson-Boltzmann level are two important concepts in the theoretical description of charged macromolecules. In this brief contribution to the Proceedings of the NATO-ASI on ``Electrostatic Effects in Soft Matter and Biophysics'', which took place in Les Houches from Oct. 1-13, 2000, we provide an introduction to both ideas and summarize a few important re… ▽ More The cell-model and its treatment on the Poisson-Boltzmann level are two important concepts in the theoretical description of charged macromolecules. In this brief contribution to the Proceedings of the NATO-ASI on ``Electrostatic Effects in Soft Matter and Biophysics'', which took place in Les Houches from Oct. 1-13, 2000, we provide an introduction to both ideas and summarize a few important results which can be obtained from them. We outline the sequence of approximations which ultimately lead to the cell-model. Then we present two exact results, namely, an expression for the osmotic pressure and a formula for the ion density at the surface of the macromolecule, known as the contact value theorem. The next section provides a derivation of the Poisson-Boltzmann equation from a variational principle and the assumption of a product state. Afterwards we apply Poisson-Boltzmann theory to the cell-model of linear polyelectrolytes. In particular, the behavior of the exact solution in the limit of zero density is compared to the concept of Manning condensation. Finally, we demonstrate how a system described by a cell model can be coupled to a salt reservoir, i.e., how the so-called Donnan equilibrium is established. △ Less

Submitted 6 December, 2001; originally announced December 2001.

Comments: 24 pages, 4 Postscript figures, uses crckapb.sty (included)

Journal ref: in ``Electrostatic Effects in Soft Matter and Biophysics'', eds. C. Holm, P. K'ekicheff, and R. Podgornik, NATO Science Series II - Mathematics, Physics and Chemistry, Vol. 46, Kluwer, Dordrecht (2001)

The Osmotic Coefficient of Rod-like Polyelectrolytes: Computer Simulation, Analytical Theory, and Experiment

Authors: M. Deserno, C. Holm, J. Blaul, M. Ballauff, M. Rehahn

Abstract: The osmotic coefficient of solutions of rod-like polyelectrolytes is considered by comparing current theoretical treatments and simulations to recent experimental data. The discussion is restricted to the case of monovalent counterions and dilute, salt-free solutions. The classical Poisson-Boltzmann solution of the cell model correctly predicts a strong decrease in the osmotic coefficient, but u… ▽ More The osmotic coefficient of solutions of rod-like polyelectrolytes is considered by comparing current theoretical treatments and simulations to recent experimental data. The discussion is restricted to the case of monovalent counterions and dilute, salt-free solutions. The classical Poisson-Boltzmann solution of the cell model correctly predicts a strong decrease in the osmotic coefficient, but upon closer look systematically overestimates its value. The contribution of ion-ion-correlations are quantitatively studied by MD simulations and the recently proposed DHHC theory. However, our comparison with experimental data obtained on synthetic, stiff-chain polyelectrolytes shows that correlation effects can only partly explain the discrepancy. A quantitative understanding thus requires theoretical efforts beyond the restricted primitive model of electrolytes. △ Less

Submitted 9 May, 2001; originally announced May 2001.

Comments: 16 pages, 2 figures

Journal ref: Eur. Phys. J. E 5, 97-103 (2001)

Overcharging of DNA in the presence of salt: Theory and Simulation

Authors: Markus Deserno, Felipe Jimenez-Angeles, Christian Holm, Marcelo Lozada-Cassou

Abstract: A study of a model rod-like polyelectrolyte molecule immersed into a monovalent or divalent electrolyte is presented. Results from the hypernetted-chain/mean spherical approximation (HNC/MSA) theory, for inhomogeneous charged fluids, {\ch are} compared with molecular dynamics (MD) simulations. As a particular case, the parameters of the polyelectrolyte molecule are mapped to those of a DNA molec… ▽ More A study of a model rod-like polyelectrolyte molecule immersed into a monovalent or divalent electrolyte is presented. Results from the hypernetted-chain/mean spherical approximation (HNC/MSA) theory, for inhomogeneous charged fluids, {\ch are} compared with molecular dynamics (MD) simulations. As a particular case, the parameters of the polyelectrolyte molecule are mapped to those of a DNA molecule. An excellent qualitative, and in some cases quantitative, agreement between HNC/MSA and MD is found. Both, HNC/MSA and MD, predict the occurrence of overcharging, which is not present in the Poisson-Boltzmann theory. Mean electrostatic potential and local concentration profiles, $ζ$-potential and charge distribution functions are obtained and discussed in terms of the observed overcharging effect. Particularly interesting results are a very non-monotonic behavior of the $ζ$-potential, as a function of the rod charge density, and the overcharging by {\em monovalent} counterions. △ Less

Submitted 31 March, 2003; v1 submitted 30 March, 2001; originally announced April 2001.

Comments: 11 pages, 8 figures, RevTex, published in J. Phys. Chem. B 2001, vol. 105, pags. 10983

Ion-ion correlations: an improved one-component plasma correction

Authors: Marcia C. Barbosa, Markus Deserno, Christian Holm

Abstract: Based on a Debye-Hueckel approach to the one-component plasma we propose a new free energy for incorporating ionic correlations into Poisson-Boltzmann like theories. Its derivation employs the exclusion of the charged background in the vicinity of the central ion, thereby yielding a thermodynamically stable free energy density, applicable within a local density approximation. This is an improvem… ▽ More Based on a Debye-Hueckel approach to the one-component plasma we propose a new free energy for incorporating ionic correlations into Poisson-Boltzmann like theories. Its derivation employs the exclusion of the charged background in the vicinity of the central ion, thereby yielding a thermodynamically stable free energy density, applicable within a local density approximation. This is an improvement over the existing Debye-Hueckel plus hole theory, which in this situation suffers from a "structuring catastrophe". For the simple example of a strongly charged stiff rod surrounded by its counterions we demonstrate that the Poisson-Boltzmann free energy functional augmented by our new correction accounts for the correlations present in this system when compared to molecular dynamics simulations. △ Less

Submitted 22 October, 1999; originally announced October 1999.

Comments: 5 pages, 2 figures, revtex style

Journal ref: Europhys. Lett. 52 (2000) 80

A Monte-Carlo approach to Poisson-Boltzmann like free energy functionals

Authors: Markus Deserno

Abstract: A simple technique is proposed for numerically determining equilibrium ion distribution functions belonging to free energies of the Poisson-Boltzmann type. The central idea is to perform a conventional Monte-Carlo simulation using the free energy as the "Hamiltonian" entering the Metropolis criterion and the spatially discretized density as degrees of freedom. This approach is complementary to t… ▽ More A simple technique is proposed for numerically determining equilibrium ion distribution functions belonging to free energies of the Poisson-Boltzmann type. The central idea is to perform a conventional Monte-Carlo simulation using the free energy as the "Hamiltonian" entering the Metropolis criterion and the spatially discretized density as degrees of freedom. This approach is complementary to the possibility of numerically solving the differential equations corresponding to the variational problem, but it is much easier to implement and to generalize. Its utility is demonstrated in two examples: valence mixtures and hard core interactions of ions surrounding a charged rod. △ Less

Submitted 19 October, 1999; originally announced October 1999.

Comments: 5 pages, 3 figures, using RevTeX style

The fraction of condensed counterions around a charged rod: Comparison of Poisson-Boltzmann theory and computer simulations

Authors: Markus Deserno, Christian Holm, Sylvio May

Abstract: We investigate the phenomenon of counterion condensation in a solution of highly charged rigid polyelectrolytes within the cell model. A method is proposed which -- based on the charge distribution function -- identifies both the fraction of condensed ions and the radial extension of the condensed layer. Within salt-free Poisson-Boltzmann (PB) theory it reproduces the well known fraction 1-1/xi… ▽ More We investigate the phenomenon of counterion condensation in a solution of highly charged rigid polyelectrolytes within the cell model. A method is proposed which -- based on the charge distribution function -- identifies both the fraction of condensed ions and the radial extension of the condensed layer. Within salt-free Poisson-Boltzmann (PB) theory it reproduces the well known fraction 1-1/xi of condensed ions for a Manning parameter xi>1. Furthermore, it predicts a weak salt dependence of this fraction and a breakdown of the concept of counterion condensation in the high salt limit. We complement our theoretical investigations with molecular dynamics simulations of a cell-like model, which constantly yield a stronger condensation than predicted by PB theory. While the agreement between theory and simulation is excellent in the monovalent, weakly charged case, it deteriorates with increasing electrostatic interaction strength and, in particular, increasing valence. For instance, at a high concentration of divalent salt and large xi our computer simulations predict charge oscillations, which mean-field theory is unable to reproduce. △ Less

Submitted 8 October, 1999; v1 submitted 17 June, 1999; originally announced June 1999.

Comments: 8 pages, 6 figures, using RevTeX style, revised version, 1 figure and more pertinent remarks concerning the failure of the energy criterion

Journal ref: Macromolecules 33, 199 (2000)

How to mesh up Ewald sums (II): An accurate error estimate for the P3M algorithm

Authors: Markus Deserno, Christian Holm

Abstract: We construct an accurate estimate for the root mean square force error of the particle-particle-particle-mesh (P3M) algorithm by extending a single particle pair error measure which has been given by Hockney and Eastwood. We also derive an easy-to-use analytic approximation to the error formula. This allows a straightforward and precise determination of the optimal splitting parameter (as a func… ▽ More We construct an accurate estimate for the root mean square force error of the particle-particle-particle-mesh (P3M) algorithm by extending a single particle pair error measure which has been given by Hockney and Eastwood. We also derive an easy-to-use analytic approximation to the error formula. This allows a straightforward and precise determination of the optimal splitting parameter (as a function of system specifications and P3M parameters) and hence knowledge of the force accuracy prior to the actual simulation. The high quality of the estimate is demonstrated in several examples. △ Less

Submitted 7 July, 1998; originally announced July 1998.

Comments: 9 pages, 7 figures included, revtex style

Report number: M98-121

Journal ref: J. Chem. Phys.109, (1998) 7694

How to mesh up Ewald sums (I): A theoretical and numerical comparison of various particle mesh routines

Authors: Markus Deserno, Christian Holm

Abstract: Standard Ewald sums, which calculate e.g. the electrostatic energy or the force in periodically closed systems of charged particles, can be efficiently speeded up by the use of the Fast Fourier Transformation (FFT). In this article we investigate three algorithms for the FFT-accelerated Ewald sum, which attracted a widespread attention, namely, the so-called particle-particle-particle-mesh (P3M)… ▽ More Standard Ewald sums, which calculate e.g. the electrostatic energy or the force in periodically closed systems of charged particles, can be efficiently speeded up by the use of the Fast Fourier Transformation (FFT). In this article we investigate three algorithms for the FFT-accelerated Ewald sum, which attracted a widespread attention, namely, the so-called particle-particle-particle-mesh (P3M), particle mesh Ewald (PME) and smooth PME method. We present a unified view of the underlying techniques and the various ingredients which comprise those routines. Additionally, we offer detailed accuracy measurements, which shed some light on the influence of several tuning parameters and also show that the existing methods -- although similar in spirit -- exhibit remarkable differences in accuracy. We propose combinations of the individual components, mostly relying on the P3M approach, which we regard as most flexible. △ Less

Submitted 7 July, 1998; originally announced July 1998.

Comments: 18 pages, 8 figures included, revtex style

Report number: M98-99

Journal ref: J. Chem. Phys. 109, (1998) 7678