-
Sliding of liquid droplets on thin viscoelastic soft layers
Authors:
Menghua Zhao,
Julien Dervaux,
Tetsuharu Narita,
François Lequeux,
Laurent Limat,
Matthieu Roché
Abstract:
Soft substrates are deformed by liquid-vapor surface tension upon contact with liquid droplets, forming the well-known wetting ridge. This ridge dynamically propagates with the moving contact line and critically influences liquid spreading. Here, we experimentally investigate gravity-driven sliding dynamics of water droplets on vertically tilted silicone layers whose viscoleasticity is characteriz…
▽ More
Soft substrates are deformed by liquid-vapor surface tension upon contact with liquid droplets, forming the well-known wetting ridge. This ridge dynamically propagates with the moving contact line and critically influences liquid spreading. Here, we experimentally investigate gravity-driven sliding dynamics of water droplets on vertically tilted silicone layers whose viscoleasticity is characterized by the Chasset-Thirion model with the exponent m. At low Bond numbers, the sliding velocity scales with droplet size as V S $\sim$ D 2 m . While in the thin-film limit, velocity exhibits a pronounced power-law dependence on nominal substrate thickness, V S $\sim$ $Π$(h) -1 m . We rationalize these observations by quantifying viscoelastic dissipation within the soft layer and balancing it against the gravitational driving force using an energy-conservation framework. Our findings offer novel avenues for designing advanced soft coatings, anti-fouling and self-cleaning surfaces, and biomedical devices.
△ Less
Submitted 18 April, 2025;
originally announced April 2025.
-
Morphology and stability of droplets sliding on soft viscoelastic substrates
Authors:
Mathieu Oléron,
Laurent Limat,
Julien Dervaux,
Matthieu Roché
Abstract:
We show that energy dissipation partition between a liquid and a solid controls the shape and stability of droplets sliding on viscoelastic gels. When both phases dissipate energy equally, droplet dynamics is similar to that on rigid solids. When only the solid dissipate, we observe an apparent contact angle hysteresis, of viscoelastic origin. We find excellent agreement between our data and a non…
▽ More
We show that energy dissipation partition between a liquid and a solid controls the shape and stability of droplets sliding on viscoelastic gels. When both phases dissipate energy equally, droplet dynamics is similar to that on rigid solids. When only the solid dissipate, we observe an apparent contact angle hysteresis, of viscoelastic origin. We find excellent agreement between our data and a non-linear model of the wetting of gels of our own that also indicates the presence of significant slip. Our work opens general questions on the dynamics of curved contact lines on compliant substrates.
△ Less
Submitted 27 April, 2023; v1 submitted 10 April, 2023;
originally announced April 2023.
-
Evaporation of liquid coating a fiber
Authors:
Marie Corpart,
Julien Dervaux,
Christophe Poulard,
Frédéric Restagno,
François Boulogne
Abstract:
We investigate theoretically and numerically the diffusion-limited evaporation of a liquid deposited on a fiber in two configurations: a sleeve and a axisymmetric barrel-shaped droplet. For a sleeve, the local flux depends on both the aspect ratio and the smallest length of the problem. By using analytical calculations and 3D finite elements simulations, we predict a divergence of this flux furthe…
▽ More
We investigate theoretically and numerically the diffusion-limited evaporation of a liquid deposited on a fiber in two configurations: a sleeve and a axisymmetric barrel-shaped droplet. For a sleeve, the local flux depends on both the aspect ratio and the smallest length of the problem. By using analytical calculations and 3D finite elements simulations, we predict a divergence of this flux further localized at the edge as the aspect ratio increases. The evaporation of axisymmetric drops on a fiber is studied with numerical simulations. For sufficiently large volumes, we evidence that the evaporation rate is almost independent of the wetting properties of the liquid, even for small contact angles, and that the droplets evaporate as spheres of the same volume.
△ Less
Submitted 14 March, 2022;
originally announced March 2022.
-
A criterion for the pinning and depinning of an advancing contact line on a cold substrate
Authors:
Rémy Herbaut,
Julien Dervaux,
Philippe Brunet,
Laurent Royon,
Laurent Limat
Abstract:
The influence of solidification on the spreading of liquids is addressed in the situation of an advancing liquid wedge on a cold substrate at $T_p < T_f$, of infinite thermal conductivity, where $T_f$ is the melting temperature. We propose a model derived from lubrication theory of contact-line dynamics, where an equilibrium between capillary pressure and viscous stress is at play, adapted here fo…
▽ More
The influence of solidification on the spreading of liquids is addressed in the situation of an advancing liquid wedge on a cold substrate at $T_p < T_f$, of infinite thermal conductivity, where $T_f$ is the melting temperature. We propose a model derived from lubrication theory of contact-line dynamics, where an equilibrium between capillary pressure and viscous stress is at play, adapted here for the geometry of a quadruple line where the vapour, liquid, solidified liquid and basal substrate meet. The Stefan thermal problem is solved in an intermediate region between molecular and mesoscopic scales, allowing to predict the shape of the solidified liquid surface. The apparent contact angle versus advancing velocity $U$ exhibits a minimal value, which is set as the transition from continuous advancing to pinning. We postulate that this transition corresponds to the experimentally observed critical velocity, dependent on undercooling temperature $T_f-T_p$, below which the liquid is pinned and advances with stick-slip dynamics. The analytical solution of the model shows a qualitatively fair agreement with experimental data. We discuss on the way to get better quantitative agreement, which in particular can be obtained when the mesoscopic cut-off length is made temperature-dependent.
△ Less
Submitted 2 January, 2020;
originally announced January 2020.
-
Nonlinear force balance at moving contact lines
Authors:
Matthieu Roché,
Laurent Limat,
Julien Dervaux
Abstract:
The spreading of a liquid over a solid material is a key process in a wide range of applications. While this phenomenon is well understood when the solid is undeformable, its "soft" counterpart is still ill-understood and no consensus has been reached with regards to the physical mechanisms ruling the spreading of liquid drops over soft deformable materials. In this work we show that the motion of…
▽ More
The spreading of a liquid over a solid material is a key process in a wide range of applications. While this phenomenon is well understood when the solid is undeformable, its "soft" counterpart is still ill-understood and no consensus has been reached with regards to the physical mechanisms ruling the spreading of liquid drops over soft deformable materials. In this work we show that the motion of a triple line on a soft elastomer is opposed both by nonlinear localized capillary and visco-elastic forces. We give an explicit analytic formula relating the dynamic contact angle of a moving drop with its velocity for arbitrary rheology. We then specialize this formula to the experimentally relevant case of elastomers with Chasset-Thirion (power-law) type of rheologies. The theoretical prediction are in very good agreement with experimental data, without any adjustable parameters. Finally, we show that the nonlinear force balance presented in this work can also be used to recover the classical de Gennes model of wetting.
△ Less
Submitted 17 April, 2019;
originally announced April 2019.
-
Corners in soft solids behave as defects in crystals
Authors:
Robin Masurel,
Matthieu Roché,
Laurent Limat,
Ioan Ionescu,
Julien Dervaux
Abstract:
All phases of matter, solid, liquid or gas, present some excess energy, compared to their bulk, at their interfaces with other materials. This excess of energy, known as the surface energy, is a fundamental property of matter and is involved in virtually all interface problems in science, from the shape of bubbles, crystals and biological cells to the delicate motion of some insects on water or th…
▽ More
All phases of matter, solid, liquid or gas, present some excess energy, compared to their bulk, at their interfaces with other materials. This excess of energy, known as the surface energy, is a fundamental property of matter and is involved in virtually all interface problems in science, from the shape of bubbles, crystals and biological cells to the delicate motion of some insects on water or the fluttering of red blood cells. Because of their high cohesive internal energies, the surface energies of solids differ fundamentally from those of fluids and depend on the solid deformations. This effect, known as the Shuttleworth effect, is well established for metals but is highly debated for amorphous materials such as glasses, elastomers or biological tissues with recent experimental results yielding strictly opposite conclusions with regards to its very existence. Using a combination of analytical results and numerical simulations, we show in this paper that those seemingly opposite results can be reconciled due to the existence of an analog of the Peach-Koehler force acting on the elastocapillary ridge and conclude that: i) there is no large Shuttleworth effect in soft elastomers and ii) the Neumann construction does not hold in elastowetting.
△ Less
Submitted 20 June, 2018;
originally announced June 2018.
-
Diffusiophoretic manipulation of particles in a drop deposited on a hydrogel
Authors:
François Boulogne,
Sangwoo Shin,
Julien Dervaux,
Laurent Limat,
Howard A. Stone
Abstract:
We report an experimental study on the manipulation of colloidal particles in a drop sitting on a hydrogel. The manipulation is achieved by diffusiophoresis, which describes a directed motion of particles induced by solute gradients. By letting the solute concentrations for the drop and the hydrogel be different, we control the motion of particles in a stable suspension, which is otherwise difficu…
▽ More
We report an experimental study on the manipulation of colloidal particles in a drop sitting on a hydrogel. The manipulation is achieved by diffusiophoresis, which describes a directed motion of particles induced by solute gradients. By letting the solute concentrations for the drop and the hydrogel be different, we control the motion of particles in a stable suspension, which is otherwise difficult to achieve. We show that diffusiophoresis can cause the particles to move either toward or away from the liquid-air interface depending on the direction of the solute gradient and the surface charge of the particles. We measure the particle adsorption experimentally and rationalize the results with a one-dimensional numerical model. We show that diffusiophoretic motion is significant at the lengthscale of a drop deposited on a hydrogel, which suggests a simple method for the deposition of particles on hydrogels.
△ Less
Submitted 20 June, 2017;
originally announced June 2017.
-
Growth and instability of a phospholipid vesicle in a bath of fatty acids
Authors:
Julien Dervaux,
Vincent Noireaux,
Albert Libchaber
Abstract:
Using a microfluidic trap, we study the behavior of individual phospholipid vesicles in contact with fatty acids. We show that spontaneous fatty acids insertion inside the bilayer is controlled by the vesicle size, osmotic pressure difference across the membrane and fatty acids concentration in the external bath. Depending on these parameters, vesicles can grow spherically or become unstable and f…
▽ More
Using a microfluidic trap, we study the behavior of individual phospholipid vesicles in contact with fatty acids. We show that spontaneous fatty acids insertion inside the bilayer is controlled by the vesicle size, osmotic pressure difference across the membrane and fatty acids concentration in the external bath. Depending on these parameters, vesicles can grow spherically or become unstable and fragment into several daughter vesicles. We establish the phase diagram for vesicle growth and we derive a simple thermodynamic model that reproduces the time evolution of the vesicle volume. Finally, we show that stable growth can be achieved on an artificial cell expressing a simple set of bacterial cytoskeletal proteins, paving the way toward artificial cell reproduction.
△ Less
Submitted 13 December, 2016;
originally announced December 2016.
-
Homogeneous deposition of particles by absorption on hydrogels
Authors:
François Boulogne,
François Ingremeau,
Julien Dervaux,
Laurent Limat,
Howard A. Stone
Abstract:
When a drop containing colloidal particles evaporates on a surface, a circular stain made of these particles is often observed due to an internal flow toward the contact line. To hinder this effect, several approaches have been proposed such as flow modification by addition of surfactants or control of the interactions between the particles. All of these strategies involve the liquid phase while m…
▽ More
When a drop containing colloidal particles evaporates on a surface, a circular stain made of these particles is often observed due to an internal flow toward the contact line. To hinder this effect, several approaches have been proposed such as flow modification by addition of surfactants or control of the interactions between the particles. All of these strategies involve the liquid phase while maintaining the drying process. However, substitution of evaporation by absorption into the substrate of the solvent has been investigated less. Here, we show that a droplet containing colloidal particles deposited on swelling hydrogels can lead to a nearly uniform coating. We report experiments and theory to explore the relation between the gel swelling, uniformity of deposition and the adsorption dynamics of the particles at the substrate. Our findings suggest that draining the solvent by absorption provides a robust route to homogeneous coatings.
△ Less
Submitted 18 November, 2015;
originally announced November 2015.
-
Irreversible Collective Migration of Cyanobacteria in Eutrophic Conditions
Authors:
Julien Dervaux,
Annick Méjean,
Philippe Brunet
Abstract:
In response to natural or anthropocentric pollutions coupled to global climate changes, microorganisms from aquatic environments can suddenly accumulate on water surface. These dense suspensions, known as blooms, are harmful to ecosystems and significantly degrade the quality of water resources. In order to determine the physico-chemical parameters involved in their formation and quantitatively pr…
▽ More
In response to natural or anthropocentric pollutions coupled to global climate changes, microorganisms from aquatic environments can suddenly accumulate on water surface. These dense suspensions, known as blooms, are harmful to ecosystems and significantly degrade the quality of water resources. In order to determine the physico-chemical parameters involved in their formation and quantitatively predict their appearance, we successfully reproduced irreversible cyanobacterial blooms in vitro. By combining chemical, biochemical and hydrodynamic evidences, we identify a mechanism, unrelated to the presence of internal gas vesicles, allowing the sudden collective upward migration in test tubes of several cyanobacterial strains (Microcystis aeruginosa PCC 7005, Microcystis aeruginosa PCC 7806 and Synechocystis sp. PCC 6803). The final state consists in a foamy layer of biomass at the air-liquid interface, in which micro-organisms remain alive for weeks, the medium lying below being almost completely depleted of cyanobacteria. These "laboratory blooms" start with the aggregation of cells at high ionic force in cyanobacterial strains that produce anionic extracellular polymeric substances (EPS). Under appropriate conditions of nutrients and light intensity, the high photosynthetic activity within cell clusters leads the dissolved oxygen (DO) to supersaturate and to nucleate into bubbles. Trapped within the EPS, these bubbles grow until their buoyancy pulls the biomass towards the free surface. By investigating a wide range of spatially homogeneous environmental conditions (illumination, salinity, cell and nutrient concentration) we identify species-dependent thresholds and timescales for bloom formation. We conclude on the relevance of such results for cyanobacterial bloom formation in the environment and we propose an efficient method for biomass harvesting in bioreactors.
△ Less
Submitted 13 November, 2015;
originally announced November 2015.
