-
Probing locally the onset of slippage at a model multi-contact interface
Authors:
V. Romero,
E. Wandersman,
G. Debrégeas,
A. Prevost
Abstract:
We report on the multi-contact frictional dynamics of model elastomer surfaces rubbed against bare glass slides. The surfaces consist of layers patterned with thousands spherical caps (radius of curvature 100 $μ$m) distributed both spatially and in height, regularly or randomly. Use of spherical asperities yields circular micro-contacts whose radius is a direct measure of the contact pressure dist…
▽ More
We report on the multi-contact frictional dynamics of model elastomer surfaces rubbed against bare glass slides. The surfaces consist of layers patterned with thousands spherical caps (radius of curvature 100 $μ$m) distributed both spatially and in height, regularly or randomly. Use of spherical asperities yields circular micro-contacts whose radius is a direct measure of the contact pressure distribution. In addition, optical tracking of individual contacts provides the in-plane deformations of the tangentially loaded interface, yielding the shear force distribution. We then investigate the stick-slip frictional dynamics of a regular hexagonal array. For all stick phases including the initial one, slip precursors are evidenced. They are found to propagate quasi-statically, normally to the iso- pressure contours. A simple quasi-static model relying on the existence of interfacial stress gradients is derived and predicts qualitatively the position of slip precursors.
△ Less
Submitted 7 November, 2013;
originally announced November 2013.
-
Texture-induced modulations of friction force: the fingerprint effect
Authors:
E. Wandersman,
R. Candelier,
G. Debregeas,
Alexis Prevost
Abstract:
Dry solid friction is often accompanied by force modulations originating from stick-slip instabilities. Here a distinct, quasi-static mechanism is evidenced leading to quasi-periodic force oscillations during sliding contact between an elastomer block, whose surface is patterned with parallel grooves, and finely abraded glass slides. The dominant oscillation frequency is set by the ratio between t…
▽ More
Dry solid friction is often accompanied by force modulations originating from stick-slip instabilities. Here a distinct, quasi-static mechanism is evidenced leading to quasi-periodic force oscillations during sliding contact between an elastomer block, whose surface is patterned with parallel grooves, and finely abraded glass slides. The dominant oscillation frequency is set by the ratio between the sliding velocity and the period of the grooves. A mechanical model is proposed that provides a quantitative prediction for the amplitude of the force modulations as a function of the normal load, the period of the grooves and the roughness characteristics of the substrate. The model's main ingredient is the non-linearity of the friction law. Since such non-linearity is ubiquitous for soft solids, this "fingerprint effect" should be relevant to a large class of frictional configurations and might in particular have important consequences in human (or humanoid) active digital touch.
△ Less
Submitted 13 July, 2011;
originally announced July 2011.
-
Perception of Surface Defects by Active Exploration with a Biomimetic Tactile Sensor
Authors:
Raphaël Candelier,
Georges Debrégeas,
Alexis Prevost
Abstract:
We investigate the transduction of tactile information during active exploration of finely textured surfaces using a novel tactile sensor mimicking the human fingertip. The sensor has been designed by integrating a linear array of 10 micro-force sensors in an elastomer layer. We measure the sensors' response to the passage of elementary topographical features in the form of a small hole on a flat…
▽ More
We investigate the transduction of tactile information during active exploration of finely textured surfaces using a novel tactile sensor mimicking the human fingertip. The sensor has been designed by integrating a linear array of 10 micro-force sensors in an elastomer layer. We measure the sensors' response to the passage of elementary topographical features in the form of a small hole on a flat substrate. The response is found to strongly depend on the relative location of the sensor with respect to the substrate/skin contact zone. This result can be quantitatively interpreted within the scope of a linear model of mechanical transduction, taking into account both the intrinsic response of individual sensors and the context-dependent interfacial stress field within the contact zone. Consequences on robotics of touch are briefly discussed.
△ Less
Submitted 28 July, 2010;
originally announced July 2010.
-
The role of fingerprints in the coding of tactile information probed with a biomimetic sensor
Authors:
J. Scheibert,
S. Leurent,
A. Prevost,
G. Debrégeas
Abstract:
In humans, the tactile perception of fine textures (spatial scale <200 micrometers) is mediated by skin vibrations generated as the finger scans the surface. To establish the relationship between texture characteristics and subcutaneous vibrations, a biomimetic tactile sensor has been designed whose dimensions match those of the fingertip. When the sensor surface is patterned with parallel ridge…
▽ More
In humans, the tactile perception of fine textures (spatial scale <200 micrometers) is mediated by skin vibrations generated as the finger scans the surface. To establish the relationship between texture characteristics and subcutaneous vibrations, a biomimetic tactile sensor has been designed whose dimensions match those of the fingertip. When the sensor surface is patterned with parallel ridges mimicking the fingerprints, the spectrum of vibrations elicited by randomly textured substrates is dominated by one frequency set by the ratio of the scanning speed to the interridge distance. For human touch, this frequency falls within the optimal range of sensitivity of Pacinian afferents, which mediate the coding of fine textures. Thus, fingerprints may perform spectral selection and amplification of tactile information that facilitate its processing by specific mechanoreceptors.
△ Less
Submitted 25 November, 2009;
originally announced November 2009.
-
Stress Field at a Sliding Frictional Contact: Experiments and Calculations
Authors:
Julien Scheibert,
Alexis Prevost,
Georges Debrégeas,
Eytan Katzav,
Mohktar Adda-Bedia
Abstract:
A MEMS-based sensing device is used to measure the normal and tangential stress fields at the base of a rough elastomer film in contact with a smooth glass cylinder in steady sliding. This geometry allows for a direct comparison between the stress profiles measured along the sliding direction and the predictions of an original \textit{exact} bidimensional model of friction. The latter assumes Am…
▽ More
A MEMS-based sensing device is used to measure the normal and tangential stress fields at the base of a rough elastomer film in contact with a smooth glass cylinder in steady sliding. This geometry allows for a direct comparison between the stress profiles measured along the sliding direction and the predictions of an original \textit{exact} bidimensional model of friction. The latter assumes Amontons' friction law, which implies that in steady sliding the interfacial tangential stress is equal to the normal stress times a pressure-independent dynamic friction coefficient $μ_d$, but makes no further assumption on the normal stress field. Discrepancy between the measured and calculated profiles is less than 14% over the range of loads explored. Comparison with a test model, based on the classical assumption that the normal stress field is unchanged upon tangential loading, shows that the exact model better reproduces the experimental profiles at high loads. However, significant deviations remain that are not accounted for by either calculations. In that regard, the relevance of two other assumptions made in the calculations, namely (i) the smoothness of the interface and (ii) the pressure-independence of $μ_d$ is briefly discussed.
△ Less
Submitted 12 May, 2009; v1 submitted 20 October, 2008;
originally announced October 2008.
-
Probing the micromechanics of a multi-contact interface at the onset of frictional sliding
Authors:
Alexis Prevost,
Julien Scheibert,
Georges Debrégeas
Abstract:
Digital Image Correlation is used to study the micromechanics of a multi-contact interface formed between a rough elastomer and a smooth glass surface. The in-plane elastomer deformation is monitored during the incipient sliding regime, i.e. the transition between static and sliding contact. As the shear load is increased, an annular slip region, in coexistence with a central stick region, is foun…
▽ More
Digital Image Correlation is used to study the micromechanics of a multi-contact interface formed between a rough elastomer and a smooth glass surface. The in-plane elastomer deformation is monitored during the incipient sliding regime, i.e. the transition between static and sliding contact. As the shear load is increased, an annular slip region, in coexistence with a central stick region, is found to progressively invade the contact. From the interfacial displacement field, the tangential stress field can be further computed using a numerical inversion procedure. These local mechanical measurements are found to be correctly captured by Cattaneo and Mindlin (CM)'s model. However, close comparison reveals significant discrepancies in both the displacements and stress fields that reflect the oversimplifying hypothesis underlying CM's scenario. In particular, our optical measurements allow us to exhibit an elasto-plastic like friction constitutive equation that differs from the rigid-plastic behavior assumed in CM's model. This local constitutive law, which involves a roughness-related length scale, is consistent with the model of Bureau \textit{et al.} [Proc. R. Soc. London A \textbf{459}, 2787 (2003)] derived for homogeneously loaded macroscopic multi-contact interfaces, thus extending its validity to mesoscopic scales.measurements allow for the first quantitative test of Cattaneo and Mindlin (CM) classical model of the incipient sliding of a smooth interface. Small deviations are observed and interpreted as a result of the finite compliance of the rough interface, a behavior which contrasts with Amontons' law of friction assumed to be valid locally in CM's model. We illustrate how these measurements actually provide a method for probing the rheology of the rough interface, which we find to be of the elasto-plastic type.
△ Less
Submitted 4 September, 2012; v1 submitted 18 September, 2008;
originally announced September 2008.
-
Experimental evidence of non-Amontons behaviour at a multicontact interface
Authors:
Julien Scheibert,
Alexis Prevost,
Joel Frelat,
Patrice Rey,
Georges Debrégeas
Abstract:
We report on normal stress field measurements at the multicontact interface between a rough elastomeric film and a smooth glass sphere under normal load, using an original MEMS-based stress sensing device. These measurements are compared to Finite Elements Method calculations with boundary conditions obeying locally Amontons' rigid-plastic-like friction law with a uniform friction coefficient. I…
▽ More
We report on normal stress field measurements at the multicontact interface between a rough elastomeric film and a smooth glass sphere under normal load, using an original MEMS-based stress sensing device. These measurements are compared to Finite Elements Method calculations with boundary conditions obeying locally Amontons' rigid-plastic-like friction law with a uniform friction coefficient. In dry contact conditions, significant deviations are observed which decrease with increasing load. In lubricated conditions, the measured profile recovers almost perfectly the predicted profile. These results are interpreted as a consequence of the finite compliance of the multicontact interface, a mechanism which is not taken into account in Amontons' law.
△ Less
Submitted 10 June, 2008;
originally announced June 2008.
-
Local contact stress measurements at a rough interface
Authors:
J. Scheibert,
A. Prevost,
J. Frelat,
P. Rey,
G. Debrégeas
Abstract:
An original MEMS-based force sensing device is designed which allows to measure spatially resolved normal and tangential stress fields at the base of an elastomeric film. This device is used for the study of the contact stress between a rough film and a smooth glass sphere under normal load. The measured profiles are compared to Finite Elements Method calculations for a smooth contact with bound…
▽ More
An original MEMS-based force sensing device is designed which allows to measure spatially resolved normal and tangential stress fields at the base of an elastomeric film. This device is used for the study of the contact stress between a rough film and a smooth glass sphere under normal load. The measured profiles are compared to Finite Elements Method calculations for a smooth contact with boundary conditions obeying Amontons-Coulomb's friction law. The accuracy of the measurements allows to discriminate between dry and lubricated contact conditions and to evidence load-dependent deviations from Amontons-Coulomb's profiles. These deviations are qualitatively interpreted by taking into account the finite compliance of the micro-contact population.
△ Less
Submitted 7 November, 2007;
originally announced November 2007.
-
X-ray observation of micro-failures in granular piles approaching an avalanche
Authors:
Alexandre Kabla,
Georges Debregeas,
Jean-Marc Di Meglio,
Tim Senden
Abstract:
An X-ray imaging technique is used to probe the stability of 3-dimensional granular packs in a slowly rotating drum. Well before the surface reaches the avalanche angle, we observe intermittent plastic events associated with collective rearrangements of the grains located in the vicinity of the free surface. The energy released by these discrete events grows as the system approaches the avalanch…
▽ More
An X-ray imaging technique is used to probe the stability of 3-dimensional granular packs in a slowly rotating drum. Well before the surface reaches the avalanche angle, we observe intermittent plastic events associated with collective rearrangements of the grains located in the vicinity of the free surface. The energy released by these discrete events grows as the system approaches the avalanche threshold. By testing various preparation methods, we show that the pre-avalanche dynamics is not solely controlled by the difference between the free surface inclination and the avalanche angle. As a consequence, the measure of the pre-avalanche dynamics is unlikely to serve as a tool for predicting macroscopic avalanches.
△ Less
Submitted 3 December, 2004;
originally announced December 2004.
-
Contact dynamics in a gently vibrated granular pile
Authors:
Alexandre Kabla,
Georges Debregeas
Abstract:
We use multi-speckle diffusive wave spectroscopy (MSDWS) to probe the micron-scale dynamics of a granular pile submitted to discrete gentle taps. The typical time-scale between plastic events is found to increase dramatically with the number of applied taps. Furthermore, this microscopic dynamics weakly depends on the solid fraction of the sample. This process is strongly analogous to the aging…
▽ More
We use multi-speckle diffusive wave spectroscopy (MSDWS) to probe the micron-scale dynamics of a granular pile submitted to discrete gentle taps. The typical time-scale between plastic events is found to increase dramatically with the number of applied taps. Furthermore, this microscopic dynamics weakly depends on the solid fraction of the sample. This process is strongly analogous to the aging phenomenon observed in thermal glassy systems. We propose a heuristic model where this slowing down mechanism is associated with a slow evolution of the distribution of the contact forces between particles. This model accounts for the main features of the observed dynamics.
△ Less
Submitted 26 March, 2003;
originally announced March 2003.
-
Local Stress Relaxation and Shear-banding in a Dry Foam under Shear
Authors:
Alexandre Kabla,
Georges Debregeas
Abstract:
We have developed a realistic simulation of 2D dry foams under quasi-static shear. After a short transient, a shear-banding instability is observed. These results are compared with measurements obtained on real 2D (confined) foams. The numerical model allows us to exhibit the mechanical response of the material to a single plastication event. From the analysis of this elastic propagator, we prop…
▽ More
We have developed a realistic simulation of 2D dry foams under quasi-static shear. After a short transient, a shear-banding instability is observed. These results are compared with measurements obtained on real 2D (confined) foams. The numerical model allows us to exhibit the mechanical response of the material to a single plastication event. From the analysis of this elastic propagator, we propose a scenario for the onset and stability of the flow localization process in foams, which should remain valid for most athermal amorphous systems under creep flow.
△ Less
Submitted 30 June, 2003; v1 submitted 27 November, 2002;
originally announced November 2002.
-
Partial rejuvenation of a colloidal glass
Authors:
F. Ozon,
T. Narita,
A. Knaebel,
G. Debrégeas,
P. Hébraud,
J. -P. Munch
Abstract:
We study the effect of shear on the aging dynamics of a colloidal suspension of synthetic clay particles. We find that a shear of amplitude $γ$ reduces the relaxation time measured just after the cessation of shear by a factor $\exp(-γ/γ_c)$, with $γ_c \sim 5%$, and is independent of the duration and the frequency of the shear. This simple law for the rejuvenation effect shows that the energy in…
▽ More
We study the effect of shear on the aging dynamics of a colloidal suspension of synthetic clay particles. We find that a shear of amplitude $γ$ reduces the relaxation time measured just after the cessation of shear by a factor $\exp(-γ/γ_c)$, with $γ_c \sim 5%$, and is independent of the duration and the frequency of the shear. This simple law for the rejuvenation effect shows that the energy involved in colloidal rearrangements is proportional to the shear amplitude, $γ$, rather than $γ^2$, leading to an Eyring-like description of the dynamics of our system.
△ Less
Submitted 7 July, 2003; v1 submitted 24 October, 2002;
originally announced October 2002.
-
Stick-slip instability for viscous fingering in a gel
Authors:
N. Puff,
G. Debregeas,
J. -M. di Meglio,
D. Higgins,
C. Wagner,
D. Bonn
Abstract:
The growth dynamics of an air finger injected in a visco-elastic gel (a PVA/borax aqueous solution) is studied in a linear Hele-Shaw cell. Besides the standard Saffmann-Taylor instability, we observe - with increasing finger velocities - the existence of two new regimes: (a) a stick-slip regime for which the finger tip velocity oscillates between 2 different values, producing local pinching of t…
▽ More
The growth dynamics of an air finger injected in a visco-elastic gel (a PVA/borax aqueous solution) is studied in a linear Hele-Shaw cell. Besides the standard Saffmann-Taylor instability, we observe - with increasing finger velocities - the existence of two new regimes: (a) a stick-slip regime for which the finger tip velocity oscillates between 2 different values, producing local pinching of the finger at regular intervals, (b) a ``tadpole'' regime where a fracture-type propagation is observed. A scaling argument is proposed to interpret the dependence of the stick-slip frequency with the measured rheological properties of the gel.
△ Less
Submitted 9 January, 2002;
originally announced January 2002.
-
Deformation and flow of a two-dimensional foam under continuous shear
Authors:
Georges Debregeas,
Herve Tabuteau,
Jean-Marc di Meglio
Abstract:
We investigate the flow properties of a two-dimensional aqueous foam submitted to a quasistatic shear in a Couette geometry. A strong localization of the flow (shear banding) at the edge of the moving wall is evidenced, characterized by an exponential decay of the average tangential velocity. Moreover, the analysis of the rapid velocity fluctuations reveals self-similar dynamical structures cons…
▽ More
We investigate the flow properties of a two-dimensional aqueous foam submitted to a quasistatic shear in a Couette geometry. A strong localization of the flow (shear banding) at the edge of the moving wall is evidenced, characterized by an exponential decay of the average tangential velocity. Moreover, the analysis of the rapid velocity fluctuations reveals self-similar dynamical structures consisting of clusters of bubbles rolling as rigid bodies. To relate the instantaneous (elastic) and time-averaged (plastic) components of the strain, we develop a stochastic model where irreversible rearrangements are activated by local stress fluctuations originating from the rubbing of the wall. This model gives a complete description of our observations and is also consistent with data obtained on granular shear bands by other groups.
△ Less
Submitted 21 March, 2001;
originally announced March 2001.
-
Signatures of granular microstructure in dense shear flows
Authors:
Daniel M. Mueth,
Georges F. Debregeas,
Greg S. Karczmar,
Peter J. Eng,
Sidney R. Nagel,
Heinrich M. Jaeger
Abstract:
Granular materials react to shear stresses differently than do ordinary fluids. Rather than deforming uniformly, materials such as dry sand or cohesionless powders develop shear bands: narrow zones containing large relative particle motion leaving adjacent regions essentially rigid[1,2,3,4,5]. Since shear bands mark areas of flow, material failure and energy dissipation, they play a crucial role…
▽ More
Granular materials react to shear stresses differently than do ordinary fluids. Rather than deforming uniformly, materials such as dry sand or cohesionless powders develop shear bands: narrow zones containing large relative particle motion leaving adjacent regions essentially rigid[1,2,3,4,5]. Since shear bands mark areas of flow, material failure and energy dissipation, they play a crucial role for many industrial, civil engineering and geophysical processes[6]. They also appear in related contexts, such as in lubricating fluids confined to ultra-thin molecular layers[7]. Detailed information on motion within a shear band in a three-dimensional geometry, including the degree of particle rotation and inter-particle slip, is lacking. Similarly, only little is known about how properties of the individual grains - their microstructure - affect movement in densely packed material[5]. Combining magnetic resonance imaging, x-ray tomography, and high-speed video particle tracking, we obtain the local steady-state particle velocity, rotation and packing density for shear flow in a three-dimensional Couette geometry. We find that key characteristics of the granular microstructure determine the shape of the velocity profile.
△ Less
Submitted 27 March, 2000;
originally announced March 2000.
-
A self-similar model for shear flows in dense granular materials
Authors:
G. Debregeas,
C. Josserand
Abstract:
We propose a model to describe the quasistatic shearing of dry granular materials, which notably captures the differences in velocity profiles recently observed in 2 and 3-D Couette flow experiments. In our scheme, the steady-state flow is due to the intermittent motion of particle clusters moving together with the wall. The motion of a cluster is associated with the transient formation of a fra…
▽ More
We propose a model to describe the quasistatic shearing of dry granular materials, which notably captures the differences in velocity profiles recently observed in 2 and 3-D Couette flow experiments. In our scheme, the steady-state flow is due to the intermittent motion of particle clusters moving together with the wall. The motion of a cluster is associated with the transient formation of a fracture inside the sheared pack. The model is based on the existence of a persistence length for the fractures, which imposes a self-similar structure on the clusters. Through a probabilistic approach, we can evaluate the rate of appearance of a cluster of a given size and obtain a prediction for the average velocity profiles. We also predict the existence of large stress fluctuations at the moving wall, which characteristics are in good agreement with experimental data.
△ Less
Submitted 24 February, 2000; v1 submitted 28 January, 1999;
originally announced January 1999.
