-
Short-time dynamics in active systems: the Vicsek model
Authors:
M. Leticia Rubio Puzzo,
Ernesto S. Loscar,
Andres De Virgiliis,
Tomas S. Grigera
Abstract:
We study the short-time dynamics (STD) of the Vicsek model with vector noise. The study of STD has proved to be very useful in the determination of the critical point, critical exponents, and spinodal points in equilibrium phase transitions. Here we aim to test its applicability in active systems. We find that, despite the essential non-equilibrium characteristics of the VM (absence of detailed ba…
▽ More
We study the short-time dynamics (STD) of the Vicsek model with vector noise. The study of STD has proved to be very useful in the determination of the critical point, critical exponents, and spinodal points in equilibrium phase transitions. Here we aim to test its applicability in active systems. We find that, despite the essential non-equilibrium characteristics of the VM (absence of detailed balance, activity), the STD presents qualitatively the same phenomenology as in equilibrium systems. From the STD one can distinguish whether the transition is continuous or discontinuous (which we have checked also computing the Binder cumulant). When the transition is continuous, one can determine the critical point and the critical exponents.
△ Less
Submitted 9 May, 2022;
originally announced May 2022.
-
Self-propelled Vicsek particles at low speed and low density
Authors:
M. Leticia Rubio Puzzo,
Andres De Virgiliis,
Tomas S. Grigera
Abstract:
We study through numerical simulation the Vicsek model for very low speeds and densities. We consider scalar noise in 2-d and 3-d, and vector noise in 3-d. We focus on the behavior of the critical noise with density and speed, trying to clarify seemingly contradictory earlier results. We find that, for scalar noise, the critical noise is a power law both in density and speed, but although we confi…
▽ More
We study through numerical simulation the Vicsek model for very low speeds and densities. We consider scalar noise in 2-d and 3-d, and vector noise in 3-d. We focus on the behavior of the critical noise with density and speed, trying to clarify seemingly contradictory earlier results. We find that, for scalar noise, the critical noise is a power law both in density and speed, but although we confirm the density exponent in 2-d, we find a speed exponent different from earlier reports (we consider lower speeds than previous studies). On the other hand, for the vector noise case we find that the dependence of the critical noise cannot be separated as a product of power laws in speed and density. Finally, we study the dependence of the relaxation time with speed and find the same power law in 2-d and 3-d, with and exponent that depends on whether the noise is above or below the critical value.
△ Less
Submitted 4 October, 2018;
originally announced October 2018.
-
Unexpected crossover dynamics of single polymer in a corrugated tube
Authors:
A. De Virgiliis,
L. Kuban,
J. Paturej,
D. Mukherji
Abstract:
We present molecular dynamics study of a generic (coarse-grained) model for single-polymer diffusion confined in a corrugated cylinder. For a narrow tube, i.e., diameter of the cylinder $δ< 2.3$, the axial diffusion coefficient $D_{||}$ scales as $D_{||} \propto N^{-3/2}$, with chain length $N$, up to $N \approx 100$ then crosses over to Rouse scaling for the larger $N$ values. The $N^{-3/2}$ scal…
▽ More
We present molecular dynamics study of a generic (coarse-grained) model for single-polymer diffusion confined in a corrugated cylinder. For a narrow tube, i.e., diameter of the cylinder $δ< 2.3$, the axial diffusion coefficient $D_{||}$ scales as $D_{||} \propto N^{-3/2}$, with chain length $N$, up to $N \approx 100$ then crosses over to Rouse scaling for the larger $N$ values. The $N^{-3/2}$ scaling is due to the large fluctuation of the polymer chain along its fully stretched equilibrium conformation. The stronger scaling, namely $N^{-3/2}$, is not observed for an atomistically smooth tube and/or for a cylinder with larger diameter.
△ Less
Submitted 3 September, 2012;
originally announced September 2012.
-
From Capillary Condensation to Interface Localization Transitions in Colloid Polymer Mixtures Confined in Thin Film Geometry
Authors:
Andres De Virgiliis,
Richard L. C. Vink,
Jürgen Horbach,
Kurt Binder
Abstract:
Monte Carlo simulations of the Asakura-Oosawa (AO) model for colloid-polymer mixtures confined between two parallel repulsive structureless walls are presented and analyzed in the light of current theories on capillary condensation and interface localization transitions. Choosing a polymer to colloid size ratio of q=0.8 and studying ultrathin films in the range of D=3 to D=10 colloid diameters t…
▽ More
Monte Carlo simulations of the Asakura-Oosawa (AO) model for colloid-polymer mixtures confined between two parallel repulsive structureless walls are presented and analyzed in the light of current theories on capillary condensation and interface localization transitions. Choosing a polymer to colloid size ratio of q=0.8 and studying ultrathin films in the range of D=3 to D=10 colloid diameters thickness, grand canonical Monte Carlo methods are used; phase transitions are analyzed via finite size scaling, as in previous work on bulk systems and under confinement between identical types of walls. Unlike the latter work, inequivalent walls are used here: while the left wall has a hard-core repulsion for both polymers and colloids, at the right wall an additional square-well repulsion of variable strength acting only on the colloids is present. We study how the phase separation into colloid-rich and colloid-poor phases occurring already in the bulk is modified by such a confinement. When the asymmetry of the wall-colloid interaction increases, the character of the transition smoothly changes from capillary condensation-type to interface localization-type. The critical behavior of these transitions is discussed, as well as the colloid and polymer density profiles across the film in the various phases, and the correlation of interfacial fluctuations in the direction parallel to the confining walls. The experimental observability of these phenomena also is briefly discussed.
△ Less
Submitted 29 July, 2008;
originally announced July 2008.
-
Confinement Effects on Phase Behavior of Soft Matter Systems
Authors:
Kurt Binder,
Juergen Horbach,
Richard Vink,
Andres De Virgiliis
Abstract:
When systems that can undergo phase separation between two coexisting phases in the bulk are confined in thin film geometry between parallel walls, the phase behavior can be profoundly modified. These phenomena shall be described and exemplified by computer simulations of the Asakura-Oosawa model for colloid-polymer mixtures, but applications to other soft matter systems (e.g. confined polymer b…
▽ More
When systems that can undergo phase separation between two coexisting phases in the bulk are confined in thin film geometry between parallel walls, the phase behavior can be profoundly modified. These phenomena shall be described and exemplified by computer simulations of the Asakura-Oosawa model for colloid-polymer mixtures, but applications to other soft matter systems (e.g. confined polymer blends) will also be mentioned. Typically a wall will prefer one of the phases, and hence the composition of the system in the direction perpendicular to the walls will not be homogeneous. If both walls are of the same kind, this effect leads to a distortion of the phase diagram of the system in thin film geometry, in comparison with the bulk, analogous to the phenomenon of "capillary condensation" of simple fluids in thin capillaries. In the case of "competing walls", where both walls prefer different phases of the two phases coexisting in the bulk, a state with an interface parallel to the walls gets stabilized. The transition from the disordered phase to this "soft mode phase" is rounded by the finite thickness of the film and not a sharp phase transition. However, a sharp transition can occur where this interface gets localized at (one of) the walls. The relation of this interface localization transition to wetting phenomena is discussed. Finally, an outlook to related phenomena is given, such as the effects of confinement in cylindrical pores on the phase behavior, and more complicated ordering phenomena (lamellar mesophases of block copolymers or nematic phases of liquid crystals under confinement).
△ Less
Submitted 16 April, 2008;
originally announced April 2008.
-
Colloid-Polymer Mixtures Confined Between Asymmetric Walls: Simulation Evidence for an Interface Localization Transition
Authors:
A. De Virgiliis,
R. L. C. Vink,
J. Horbach,
K. Binder
Abstract:
Phase separation of colloid-polymer mixtures, described by the Asakura-Oosawa (AO) model, confined in a thin slit pore is studied by grand-canonical Monte Carlo simulation. While one wall is a hard wall for both particles, at the other wall there acts an additional repulsive potential on the colloids only. Varying the strength of this potential, a crossover from capillary condensation to an inte…
▽ More
Phase separation of colloid-polymer mixtures, described by the Asakura-Oosawa (AO) model, confined in a thin slit pore is studied by grand-canonical Monte Carlo simulation. While one wall is a hard wall for both particles, at the other wall there acts an additional repulsive potential on the colloids only. Varying the strength of this potential, a crossover from capillary condensation to an interface localization transition is found. The latter occurs under conditions where in the bulk almost complete phase separation has occurred.
△ Less
Submitted 18 September, 2006;
originally announced September 2006.
-
Phase diagram and structure of colloid-polymer mixtures confined between walls
Authors:
Richard L. C. Vink,
Andres De Virgiliis,
Juergen Horbach,
Kurt Binder
Abstract:
The influence of confinement, due to flat parallel structureless walls, on phase separation in colloid-polymer mixtures, is investigated by means of grand-canonical Monte Carlo simulations. Ultra-thin films, with thicknesses between $D=3-10$ colloid diameters, are studied. The Asakura-Oosawa model [J. Chem. Phys. 22, 1255 (1954)] is used to describe the particle interactions. To simulate efficie…
▽ More
The influence of confinement, due to flat parallel structureless walls, on phase separation in colloid-polymer mixtures, is investigated by means of grand-canonical Monte Carlo simulations. Ultra-thin films, with thicknesses between $D=3-10$ colloid diameters, are studied. The Asakura-Oosawa model [J. Chem. Phys. 22, 1255 (1954)] is used to describe the particle interactions. To simulate efficiently, a ``cluster move'' [J. Chem. Phys. 121, 3253 (2004)] is used in conjunction with successive umbrella sampling [J. Chem. Phys. 120, 10925 (2004)]. These techniques, when combined with finite size scaling, enable an accurate determination of the unmixing binodal. Our results show that the critical behavior of the confined mixture is described by ``effective'' critical exponents, which gradually develop from values near those of the two-dimensional Ising model, to those of the three-dimensional Ising model, as $D$ increases. The scaling predictions of Fisher and Nakanishi [J. Chem. Phys. 75, 5875 (1981)] for the shift of the critical point are compatible with our simulation results. Surprisingly, however, the colloid packing fraction at criticality approaches its bulk ($D \to \infty$) value non-monotonically, as $D$ is increased. Far from the critical point, our results are compatible with the simple Kelvin equation, implying a shift of order 1/D in the coexistence colloid chemical potential. We also present density profiles and pair distribution functions for a number of state points on the binodal, and the influence of the colloid-wall interaction is studied.
△ Less
Submitted 4 July, 2006;
originally announced July 2006.
-
Interplay of order-disorder phenomena and diffusion in rigid binary alloys: Monte Carlo simulations of the two-dimensional ABV model
Authors:
A. De Virgiliis,
K. Binder
Abstract:
Transport phenomena are studied for a binary (AB) alloy on a rigid square lattice with nearest-neighbor attraction between unlike particles, assuming a small concentration $c_v$ of vacancies $V$ being present, to which $A(B)$ particles can jump with rates $Γ_A (Γ_B)$ in the case where the nearest neighbor attractive energy $ε_{AB}$ is negligible in comparison with the thermal energy $k_BT$ in th…
▽ More
Transport phenomena are studied for a binary (AB) alloy on a rigid square lattice with nearest-neighbor attraction between unlike particles, assuming a small concentration $c_v$ of vacancies $V$ being present, to which $A(B)$ particles can jump with rates $Γ_A (Γ_B)$ in the case where the nearest neighbor attractive energy $ε_{AB}$ is negligible in comparison with the thermal energy $k_BT$ in the system. This model exhibits a continuous order-disorder transition for concentrations $c_A,c_B=1-c_A-c_V$ in the range $c_{A,1}^{crit}\leq c_A \leq c_{A,2}^{crit}$, with $c_{A,1}^{crit}=(1-m^*-c_V)/2$, $c_{A,2}^{crit} =(1+m^*-c_V)/2$, $m* \approx 0.25$, the maximum critical temperature occurring for $c*=c_A=c_B=(1-c_V)/2$, i.e. $m^*=0$. This phase transition belongs to the $d=2$ Ising universality class, demonstrated by a finite size scaling analysis. From a study of mean-square displacements of tagged particles, self-diffusion coefficients are deduced, while applying chemical potential gradients allow the estimation of Onsager coefficients. Analyzing finally the decay with time of sinusoidal concentration variations that were prepared as initial condition, also the interdiffusion coefficient is obtained as function of concentration and temperature. As in the random alloy case (i.e., a noninteracting ABV-model) no simple relation between self-diffusion and interdiffusion is found. Unlike this model mean field theory cannot describe interdiffusion, however, even if the necessary Onsager coefficients are estimated via simulation.
△ Less
Submitted 9 May, 2006;
originally announced May 2006.
-
A Novel Predictive Tool in Nanoengineering: Straightforward Estimation of Superconformal Filling Efficiency
Authors:
A. De Virgiliis,
O. Azzaroni,
R. C. Salvarezza,
E. V. Albano
Abstract:
It is shown that the superconformal filling (SCF) efficiency ($ε_{SCF}$) of nano-scale cavities can be rationalized in terms of relevant physical and geometric parameters. Based on extensive numerical simulations and using the dynamic scaling theory of interface growth, it is concluded that the relevant quantity for the evaluation of $ε_{SCF}$ is the so-called "physical" aspect ratio…
▽ More
It is shown that the superconformal filling (SCF) efficiency ($ε_{SCF}$) of nano-scale cavities can be rationalized in terms of relevant physical and geometric parameters. Based on extensive numerical simulations and using the dynamic scaling theory of interface growth, it is concluded that the relevant quantity for the evaluation of $ε_{SCF}$ is the so-called "physical" aspect ratio $S_{P} = L/M^{β/α}$, where $α$ ($β$) is the roughness (growth) exponent that governs the dynamic evolution of the system and $L$ ($M$) is the typical depth (width) of the cavity. The theoretical predictions are in excellent agreement with recently reported experimental data for the SCF of electrodeposited copper and chemically deposited silver in confined geometries, thus giving the basis of a new tool to manage nanoengineering-related problems not completely resolved so far.
△ Less
Submitted 7 October, 2002;
originally announced October 2002.
