-
Structuring in Thin Films during Meniscus-Guided Deposition
Authors:
René de Bruijn,
Anton A. Darhuber,
Jasper J. Michels,
Paul van der Schoot
Abstract:
We study theoretically the evaporation-driven phase separation of a binary fluid mixture in a thin film deposited on a moving substrate, as occurs in meniscus-guided deposition for solution-processed materials. Our focus is on rapid substrate motion during, where phase separation takes place far removed from the coating device under conditions where the mixture is essentially stationary with respe…
▽ More
We study theoretically the evaporation-driven phase separation of a binary fluid mixture in a thin film deposited on a moving substrate, as occurs in meniscus-guided deposition for solution-processed materials. Our focus is on rapid substrate motion during, where phase separation takes place far removed from the coating device under conditions where the mixture is essentially stationary with respect to the substrate. We account for the hydrodynamic transport of the mixture within the lubrication approximation. In the early stages of demixing, diffusive and evaporative mass transport predominates, consistent with earlier studies on evaporation-driven spinodal decomposition. By contrast, in the late-stage coarsening of the demixing process, the interplay of solvent evaporation, diffusive, and hydrodynamic mass transport results in a number of distinct coarsening mechanisms. The effective coarsening rate is dictated by the (momentarily) dominant mass transport mechanism and therefore depends on the material properties, evaporation rate and time: slow solvent evaporation results in initially diffusive coarsening that for sufficiently strong hydrodynamic transport transitions to hydrodynamic coarsening, whereas rapid solvent evaporation can preempt and suppress either or both hydrodynamic and diffusive coarsening. We identify a novel hydrodynamic coarsening regime for off-critical mixtures, arising from the interaction of the interfaces between solute-rich and solute-poor regions in the film with the solution-gas interface. This interaction induces directional motion of solute-rich droplets along gradients in the film thickness, from regions where the film is relatively thick to where it is thinner. The solute-rich domains subsequently accumulate and coalesce in the thinner regions, enhancing domain growth.
△ Less
Submitted 28 June, 2024;
originally announced June 2024.
-
Periodic phase-separation during meniscus-guided deposition
Authors:
René de Bruijn,
Anton A. Darhuber,
Jasper J. Michels,
Paul van der Schoot
Abstract:
We numerically investigate the meniscus-guided coating of a binary fluid mixture containing a solute and a volatile solvent that phase separates via spinodal decomposition. Motivation is the evaporation-driven deposition of material during the fabrication of organic thin film electronics. We find a transition in the phase-separation morphology from an array of droplet-shaped domains deposited peri…
▽ More
We numerically investigate the meniscus-guided coating of a binary fluid mixture containing a solute and a volatile solvent that phase separates via spinodal decomposition. Motivation is the evaporation-driven deposition of material during the fabrication of organic thin film electronics. We find a transition in the phase-separation morphology from an array of droplet-shaped domains deposited periodically parallel to the slot opening to isotropically dispersed solute-rich droplets with increasing coating velocity. This transition originates from the competition between the hydrodynamic injection of the solution into the film and diffusive transport that cannot keep up with replenishing the depletion of solute near the solute-rich domains. The critical velocity separating the two regimes and the characteristic length scale of the phase-separated morphologies are determined by the ratio of two emergent length scales: (i) the spinodal length, which implicitly depends on the evaporation rate and the properties of the solution, and (ii) a depletion length proportional to the ratio of the tracer diffusivity of the solute and the coating velocity. For coating below the critical velocity, an array of droplet-shaped domains is deposited periodically parallel to the slot opening, with the domain size and deposition wavelength proportional to a solute depletion length. As the competition in the mass transport is inherent in any kind of unidirectional deposition of demixing solutions, our findings should apply to a broad range of coating techniques and forced demixing processes.
△ Less
Submitted 11 June, 2024;
originally announced June 2024.
-
Compound redistribution due to droplet evaporation on a thin polymeric film: theory
Authors:
Thijs W. G. van der Heijden,
Anton A. Darhuber,
Paul van der Schoot
Abstract:
A thin polymeric film in contact with a fluid body may leach low-molecular-weight compounds into the fluid. If this fluid is a small droplet, the compound concentration within the liquid increases due to ongoing leaching in combination with the evaporation of the droplet. This may eventually lead to an inversion of the transport process and a redistribution of the compounds within the thin film. I…
▽ More
A thin polymeric film in contact with a fluid body may leach low-molecular-weight compounds into the fluid. If this fluid is a small droplet, the compound concentration within the liquid increases due to ongoing leaching in combination with the evaporation of the droplet. This may eventually lead to an inversion of the transport process and a redistribution of the compounds within the thin film. In order to gain an understanding of the compound redistribution, we apply a macroscopic model for the evaporation of a droplet and combine that with a diffusion model for the compound transport. In the model, material deposition and the resulting contact line pinning are associated with the precipitation of a fraction of the dissolved material. We find three power law regimes for the size of the deposit area as a function of the initial droplet size, dictated by the competition between evaporation, diffusion and the initial compound concentrations in the droplet and the thin film. The strength of the contact line pinning determines the deposition profile of the precipitate, characterised by a pronounced edge and a linearly decaying profile towards the centre of the stain. Our predictions for the concentration profile within the solid substrate resemble patterns found experimentally.
△ Less
Submitted 8 May, 2019;
originally announced May 2019.
-
A lattice Boltzmann method for thin liquid film hydrodynamics
Authors:
Stefan Zitz,
Andrea Scagliarini,
Suryanarayana Maddu Kondaiah,
Anton A. Darhuber,
Jens Harting
Abstract:
We propose a novel approach to the numerical simulation of thin film flows, based on the lattice Boltzmann method. We outline the basic features of the method, show in which limits the expected thin film equations are recovered and perform validation tests. The numerical scheme is applied to the viscous Rayleigh-Taylor instability of a thin film and to the spreading of a sessile drop towards its e…
▽ More
We propose a novel approach to the numerical simulation of thin film flows, based on the lattice Boltzmann method. We outline the basic features of the method, show in which limits the expected thin film equations are recovered and perform validation tests. The numerical scheme is applied to the viscous Rayleigh-Taylor instability of a thin film and to the spreading of a sessile drop towards its equilibrium contact angle configuration. We show that the Cox-Voinov law is satisfied, and that the effect of a tunable slip length on the substrate is correctly captured. We address, then, the problem of a droplet sliding on an inclined plane, finding that the Capillary number scales linearly with the Bond number, in agreement with experimental results. At last, we demonstrate the ability of the method to handle heterogenous and complex systems by showcasing the controlled dewetting of a thin film on a chemically structured substrate.
△ Less
Submitted 30 August, 2019; v1 submitted 17 October, 2018;
originally announced October 2018.
-
A macroscopic model for sessile droplet evaporation on a flat surface
Authors:
Thijs W. G. van der Heijden,
Anton A. Darhuber,
Paul van der Schoot
Abstract:
The evaporation of sessile droplets on a flat surface involves a complex interplay between phase change, diffusion, advection and surface forces. In an attempt to significantly reduce the complexity of the problem and to make it manageable, we propose a simple model hinged on a surface free energy-based relaxation dynamics of the droplet shape, a diffusive evaporation model and a contact line pinn…
▽ More
The evaporation of sessile droplets on a flat surface involves a complex interplay between phase change, diffusion, advection and surface forces. In an attempt to significantly reduce the complexity of the problem and to make it manageable, we propose a simple model hinged on a surface free energy-based relaxation dynamics of the droplet shape, a diffusive evaporation model and a contact line pinning mechanism governed by a yield stress. Our model reproduces the known dynamics of droplet shape relaxation and of droplet evaporation, both in the absence and in the presence of contact line pinning. We show that shape relaxation during evaporation significantly affects the lifetime of a drop. We find that the dependence of the evaporation time on the initial contact angle is a function of the competition between the shape relaxation and evaporation, and is strongly affected by any contact line pinning.
△ Less
Submitted 12 July, 2018;
originally announced July 2018.
-
Slip behavior in liquid films on surfaces of patterned wettability: Comparison between continuum and molecular dynamics simulations
Authors:
Nikolai V. Priezjev,
Anton A. Darhuber,
Sandra M. Troian
Abstract:
We investigate the behavior of the slip length in Newtonian liquids subject to planar shear bounded by substrates with mixed boundary conditions. The upper wall, consisting of a homogenous surface of finite or vanishing slip, moves at a constant speed parallel to a lower stationary wall, whose surface is patterned with an array of stripes representing alternating regions of no-shear and finite o…
▽ More
We investigate the behavior of the slip length in Newtonian liquids subject to planar shear bounded by substrates with mixed boundary conditions. The upper wall, consisting of a homogenous surface of finite or vanishing slip, moves at a constant speed parallel to a lower stationary wall, whose surface is patterned with an array of stripes representing alternating regions of no-shear and finite or no-slip. Velocity fields and effective slip lengths are computed both from molecular dynamics (MD) simulations and solution of the Stokes equation for flow configurations either parallel or perpendicular to the stripes. Excellent agreement between the hydrodynamic and MD results is obtained when the normalized width of the slip regions, $a/σ\gtrsim {\cal O}(10)$, where $σ$ is the (fluid) molecular diameter characterizing the Lennard-Jones interaction. In this regime, the effective slip length increases monotonically with $a/σ$ to a saturation value. For $a/σ\lesssim {\cal O}(10)$ and transverse flow configurations, the non-uniform interaction potential at the lower wall constitutes a rough surface whose molecular scale corrugations strongly reduce the effective slip length below the hydrodynamic results. The translational symmetry for longitudinal flow eliminates the influence of molecular scale roughness; however, the reduced molecular ordering above the wetting regions of finite slip for small values of $a/σ$ increases the value of the effective slip length far above the hydrodynamic predictions. The strong inverse correlation between the effective slip length and the liquid structure factor representative of the first fluid layer near the patterned wall illustrates the influence of molecular ordering effects on slip in non-inertial flows.
△ Less
Submitted 9 May, 2005; v1 submitted 12 May, 2004;
originally announced May 2004.
