-
Realization of directional amplification in a microwave optomechanical device
Authors:
L. Mercier de Lépinay,
E. Damskägg,
C. F. Ockeloen-Korppi,
M. A. Sillanpää
Abstract:
Directional transmission or amplification of microwave signals is indispensable in various applications involving sensitive measurements. In this work we show in experiment how to use a generic cavity optomechanical setup to non-reciprocally amplify microwave signals above 3 GHz in one direction by 9 decibels, and simultaneously attenuate the transmission in the opposite direction by 21 decibels.…
▽ More
Directional transmission or amplification of microwave signals is indispensable in various applications involving sensitive measurements. In this work we show in experiment how to use a generic cavity optomechanical setup to non-reciprocally amplify microwave signals above 3 GHz in one direction by 9 decibels, and simultaneously attenuate the transmission in the opposite direction by 21 decibels. We use a device including two on-chip superconducting resonators and two metallic drumhead mechanical oscillators. Application of four microwave pump tone frequencies allows for designing constructive or destructive interference for a signal tone depending on the propagation direction. The device can also be configured as an isolator with a lossless nonreciprocal transmission and 18 dB of isolation.
△ Less
Submitted 14 November, 2018;
originally announced November 2018.
-
Sideband cooling of nearly degenerate micromechanical oscillators in a multimode optomechanical system
Authors:
C. F. Ockeloen-Korppi,
M. F. Gely,
E. Damskägg,
M. Jenkins,
G. A. Steele,
M. A. Sillanpää
Abstract:
Multimode optomechanical systems are an emerging platform for studying fundamental aspects of matter near the quantum ground state and are useful in sensitive sensing and measurement applications. We study optomechanical cooling in a system where two nearly degenerate mechanical oscillators are coupled to a single microwave cavity. Due to an optically mediated coupling the two oscillators hybridiz…
▽ More
Multimode optomechanical systems are an emerging platform for studying fundamental aspects of matter near the quantum ground state and are useful in sensitive sensing and measurement applications. We study optomechanical cooling in a system where two nearly degenerate mechanical oscillators are coupled to a single microwave cavity. Due to an optically mediated coupling the two oscillators hybridize into a bright mode with strong optomechanical cooling rate and a dark mode nearly decoupled from the system. We find that at high coupling, sideband cooling of the dark mode is strongly suppressed. Our results are relevant to novel optomechanical systems where multiple closely-spaced modes are intrinsically present.
△ Less
Submitted 30 October, 2018;
originally announced October 2018.
-
Revealing hidden quantum correlations in an electromechanical measurement
Authors:
C. F. Ockeloen-Korppi,
E. Damskägg,
G. S. Paraoanu,
F. Massel,
M. A. Sillanpää
Abstract:
Under a strong quantum measurement, the motion of an oscillator is disturbed by the measurement back-action, as required by the Heisenberg uncertainty principle. When a mechanical oscillator is continuously monitored via an electromagnetic cavity, as in a cavity optomechanical measurement, the back-action is manifest by the shot noise of incoming photons that becomes imprinted onto the motion of t…
▽ More
Under a strong quantum measurement, the motion of an oscillator is disturbed by the measurement back-action, as required by the Heisenberg uncertainty principle. When a mechanical oscillator is continuously monitored via an electromagnetic cavity, as in a cavity optomechanical measurement, the back-action is manifest by the shot noise of incoming photons that becomes imprinted onto the motion of the oscillator. Following the photons leaving the cavity, the correlations appear as squeezing of quantum noise in the emitted field. Here we observe such "ponderomotive" squeezing in the microwave domain using an electromechanical device made out of a superconducting resonator and a drumhead mechanical oscillator. Under a strong measurement, the emitted field develops complex-valued quantum correlations, which in general are not completely accessible by standard homodyne measurements. We recover these hidden correlations, using a phase-sensitive measurement scheme employing two local oscillators. The utilization of hidden correlations presents a step forward in the detection of weak forces, as it allows to fully utilize the quantum noise reduction under the conditions of strong force sensitivity.
△ Less
Submitted 7 September, 2018;
originally announced September 2018.
-
Entangled massive mechanical oscillators
Authors:
C. F. Ockeloen-Korppi,
E. Damskagg,
J. -M. Pirkkalainen,
A. A. Clerk,
F. Massel,
M. J. Woolley,
M. A. Sillanpaa
Abstract:
An entangled quantum state of two or more particles or objects exhibits some of the most peculiar features of quantum mechanics. Entangled systems cannot be described independently of each other even though they may have an arbitrarily large spatial separation. Reconciling this property with the inherent uncertainty in quantum states is at the heart of some of the most famous debates in the develo…
▽ More
An entangled quantum state of two or more particles or objects exhibits some of the most peculiar features of quantum mechanics. Entangled systems cannot be described independently of each other even though they may have an arbitrarily large spatial separation. Reconciling this property with the inherent uncertainty in quantum states is at the heart of some of the most famous debates in the development of quantum theory. Nonetheless, entanglement nowadays has a solid theoretical and experimental foundation, and it is the crucial resource behind many emerging quantum technologies. Entanglement has been demonstrated for microscopic systems, such as with photons, ions, and electron spins, and more recently in microwave and electromechanical devices. For macroscopic objects, however, entanglement becomes exceedingly fragile towards environmental disturbances. A major outstanding goal has been to create and verify the entanglement between the motional states of slowly-moving massive objects. Here, we carry out such an experimental demonstration, with the moving bodies realized as two micromechanical oscillators coupled to a microwave-frequency electromagnetic cavity that is used to create and stabilise the entanglement of the centre-of-mass motion of the oscillators. We infer the existence of entanglement in the steady state by combining measurement of correlated mechanical fluctuations with an analysis of the microwaves emitted from the cavity. Our work qualitatively extends the range of entangled physical systems, with implications in quantum information processing, precision measurement, and tests of the limits of quantum mechanics.
△ Less
Submitted 5 November, 2017;
originally announced November 2017.
-
Noiseless quantum measurement and squeezing of microwave fields utilizing mechanical vibrations
Authors:
C. F. Ockeloen-Korppi,
E. Damskägg,
J. -M. Pirkkalainen,
T. T. Heikkilä,
F. Massel,
M. A. Sillanpää
Abstract:
A process which strongly amplifies both quadrature amplitudes of an oscillatory signal necessarily adds noise. Alternatively, if the information in one quadrature is lost in phase-sensitive amplification, it is possible to completely reconstruct the other quadrature. Here we demonstrate such a nearly perfect phase-sensitive measurement using a cavity optomechanical scheme, characterized by an extr…
▽ More
A process which strongly amplifies both quadrature amplitudes of an oscillatory signal necessarily adds noise. Alternatively, if the information in one quadrature is lost in phase-sensitive amplification, it is possible to completely reconstruct the other quadrature. Here we demonstrate such a nearly perfect phase-sensitive measurement using a cavity optomechanical scheme, characterized by an extremely small noise less than 0.2 quanta. We also observe microwave radiation strongly squeezed by 8 dB below vacuum. A source of bright squeezed microwaves opens up applications in manipulations of quantum systems, and noiseless amplification can be used even at modest cryogenic temperatures.
△ Less
Submitted 31 October, 2016;
originally announced October 2016.
-
Dynamically creating tripartite resonance and dark modes in a multimode optomechanical system
Authors:
E. Damskägg,
J. -M. Pirkkalainen,
M. A. Sillanpää
Abstract:
We study a multimode optomechanical system where two mechanical oscillators are coupled to an electromagnetic cavity. Previously it has been shown that if the mechanical resonances have nearly equal frequencies, one can make the oscillators to interact via the cavity by strong pumping with a coherent pump tone. One can view the interaction also as emergence of an electromagnetically dark mode whic…
▽ More
We study a multimode optomechanical system where two mechanical oscillators are coupled to an electromagnetic cavity. Previously it has been shown that if the mechanical resonances have nearly equal frequencies, one can make the oscillators to interact via the cavity by strong pumping with a coherent pump tone. One can view the interaction also as emergence of an electromagnetically dark mode which gets asymptotically decoupled from the cavity and has a linewidth much smaller than that of the bare cavity. The narrow linewidth and long lifetime of the dark mode could be advantageous for example in information storage and processing. Here we investigate the possibility to create dark modes dynamically using two pump tones. We show that if the mechanical frequencies are intrinsically different, one can bring the mechanical oscillators and the cavity on-resonance and thus create a dark mode by double sideband pumping of the cavity. We realize the scheme in a microwave optomechanical device employing two drum oscillators with unmatched frequencies, ω_1 /2π = 8.1MHz and ω_2 /2π = 14.2MHz. We also observe a breakdown of the rotating-wave approximation, most pronounced in another device where the mechanical frequencies are close to each other.
△ Less
Submitted 28 September, 2016;
originally announced September 2016.
-
Quantum back-action evading measurement of collective mechanical modes
Authors:
C. F. Ockeloen-Korppi,
E. Damskägg,
J. -M. Pirkkalainen,
A. A. Clerk,
M. J. Woolley,
M. A. Sillanpää
Abstract:
The standard quantum limit constrains the precision of an oscillator position measurement. It arises from a balance between the imprecision and the quantum back-action of the measurement. However, a measurement of only a single quadrature of the oscillator can evade the back-action and be made with arbitrary precision. Here we demonstrate quantum back-action evading measurements of a collective qu…
▽ More
The standard quantum limit constrains the precision of an oscillator position measurement. It arises from a balance between the imprecision and the quantum back-action of the measurement. However, a measurement of only a single quadrature of the oscillator can evade the back-action and be made with arbitrary precision. Here we demonstrate quantum back-action evading measurements of a collective quadrature of two mechanical oscillators, both coupled to a common microwave cavity. The work allows for quantum state tomography of two mechanical oscillators, and provides a foundation for macroscopic mechanical entanglement and force sensing beyond conventional quantum limits.
△ Less
Submitted 27 September, 2016; v1 submitted 22 August, 2016;
originally announced August 2016.
-
Low-noise amplification and frequency conversion with a multiport microwave optomechanical device
Authors:
C. F. Ockeloen-Korppi,
E. Damskägg,
J. -M. Pirkkalainen,
T. T. Heikkilä,
F. Massel,
M. A. Sillanpää
Abstract:
High-gain amplifiers of electromagnetic signals operating near the quantum limit are crucial for quantum information systems and ultrasensitive quantum measurements. However, the existing techniques have a limited gain-bandwidth product and only operate with weak input signals. Here we demonstrate a two-port optomechanical scheme for amplification and routing of microwave signals, a system that si…
▽ More
High-gain amplifiers of electromagnetic signals operating near the quantum limit are crucial for quantum information systems and ultrasensitive quantum measurements. However, the existing techniques have a limited gain-bandwidth product and only operate with weak input signals. Here we demonstrate a two-port optomechanical scheme for amplification and routing of microwave signals, a system that simultaneously performs high-gain amplification and frequency conversion in the quantum regime. Our amplifier, implemented in a two-cavity microwave optomechanical device, shows 41 dB of gain and has a high dynamic range, handling input signals up to $10^{13}$ photons per second, three orders of magnitude more than corresponding Josephson parametric amplifiers. We show that although the active medium, the mechanical resonator, is at a high temperature far from the quantum limit, only 4.6 quanta of noise is added to the input signal. Our method can be readily applied to a wide variety of optomechanical systems, including hybrid optical-microwave systems, creating a universal hub for signals at the quantum level.
△ Less
Submitted 18 February, 2016;
originally announced February 2016.
-
Squeezing of quantum noise of motion in a micromechanical resonator
Authors:
J. -M. Pirkkalainen,
E. Damskägg,
M. Brandt,
F. Massel,
M. A. Sillanpää
Abstract:
A pair of conjugate observables, such as the quadrature amplitudes of harmonic motion, have fundamental fluctuations which are bound by the Heisenberg uncertainty relation. However, in a squeezed quantum state, fluctuations of a quantity can be reduced below the standard quantum limit, at the cost of increased fluctuations of the conjugate variable. Here we prepare a nearly macroscopic moving body…
▽ More
A pair of conjugate observables, such as the quadrature amplitudes of harmonic motion, have fundamental fluctuations which are bound by the Heisenberg uncertainty relation. However, in a squeezed quantum state, fluctuations of a quantity can be reduced below the standard quantum limit, at the cost of increased fluctuations of the conjugate variable. Here we prepare a nearly macroscopic moving body, realized as a micromechanical resonator, in a squeezed quantum state. We obtain squeezing of one quadrature amplitude $1.1 \pm 0.4$ dB below the standard quantum limit, thus achieving a long-standing goal of obtaining motional squeezing in a macroscopic object.
△ Less
Submitted 14 October, 2015; v1 submitted 15 July, 2015;
originally announced July 2015.
