Showing 1–50 of 140 results for author: Cuniberti, G

Are nonequilibrium effects relevant for chiral molecule discrimination?

Authors: Federico Ravera, Leonardo Medrano Sandonas, Rafael Gutierrez, Mariagrazia Graziano, Gianaurelio Cuniberti

Abstract: Sensing and discriminating between enantiomers of chiral molecules remains a significant challenge in the design of sensor platforms. In the case of chemoresistive sensors, where detection relies on changes in electrical response upon analyte adsorption, the sensor substrate is typically functionalized with chirality sensitive molecular receptors. In this computational study, we investigate whethe… ▽ More Sensing and discriminating between enantiomers of chiral molecules remains a significant challenge in the design of sensor platforms. In the case of chemoresistive sensors, where detection relies on changes in electrical response upon analyte adsorption, the sensor substrate is typically functionalized with chirality sensitive molecular receptors. In this computational study, we investigate whether a chirality-blind substrate, such as a graphene nanoribbon, is still capable of discriminating between enantiomers. To this end, we employ a density-functional parametrized tight-binding method combined with nonequilibrium Green functions. For a small set of chiral amino acids, we demonstrate that accounting for the nonequilibrium response of the device leads to significant differences in the electrical currents of enantiomeric pairs of the order tens of nanoamperes. This effect is further amplified when structural fluctuations of the device's active region are considered (1-2 microAmp). Moreover, we propose new quantum-mechanical quantities for enantioselective discrimination in molecular sensors, with an emphasis on binding features and property-property correlations. Therefore, our work demonstrates the significance of nonequilibrium effects in chiral discrimination, laying the foundation for future investigations addressing the design of chiral molecular sensors. △ Less

Submitted 11 April, 2025; originally announced April 2025.

Chirality-induced Spin-Orbit Coupling and Spin Selectivity

Authors: Massimiliano Di Ventra, Rafael Gutierrez, Gianaurelio Cuniberti

Abstract: We show that a spinor traveling along a helical path develops a spin-orbit coupling because of the curvature of the path. We then estimate the magnitude of this effective geometric spin-orbit interaction for structures that showcase chirality-induced spin selectivity (CISS). We find that this chirality-induced spin-orbit coupling ($χ$-SOC), in conjunction with broken time-reversal symmetry, may be… ▽ More We show that a spinor traveling along a helical path develops a spin-orbit coupling because of the curvature of the path. We then estimate the magnitude of this effective geometric spin-orbit interaction for structures that showcase chirality-induced spin selectivity (CISS). We find that this chirality-induced spin-orbit coupling ($χ$-SOC), in conjunction with broken time-reversal symmetry, may be an important ingredient for the microscopic underpinning of the CISS phenomenon. △ Less

Submitted 22 May, 2025; v1 submitted 13 February, 2025; originally announced February 2025.

Tuning the Planarity of an Aromatic Thianthrene-Based Molecule on Au(111)

Authors: Kwan Ho Au-Yeung, Suchetana Sarkar, Sattwick Haldar, Pranjit Das, Tim Kühne, Dmitry A. Ryndyk, Preeti Bhauriyal, Stefan Kaskel, Thomas Heine, Gianaurelio Cuniberti, Andreas Schneemann, Francesca Moresco

Abstract: Non-planar aromatic molecules are interesting systems for organic electronics and optoelectronics applications due to their high stability and electronic properties. By using scanning tunneling microscopy and spectroscopy, we investigated thianthrene-based molecules adsorbed on Au(111), which are non-planar in the gas phase and the bulk solid state. Varying the molecular coverage leads to the form… ▽ More Non-planar aromatic molecules are interesting systems for organic electronics and optoelectronics applications due to their high stability and electronic properties. By using scanning tunneling microscopy and spectroscopy, we investigated thianthrene-based molecules adsorbed on Au(111), which are non-planar in the gas phase and the bulk solid state. Varying the molecular coverage leads to the formation of two different kinds of self-assembled structures: close-packed islands and quasi one-dimensional chains. We found that the molecules are non-planar within the close-packed islands, while the configuration is planar in the molecular chain and for single adsorbed molecules. Using vertical tip manipulation to isolate a molecule from the island, we demonstrate the conversion of a non-planar molecule to its planar configuration. We discuss the two different geometries and their electronic properties with the support of density functional theory calculations. △ Less

Submitted 9 September, 2024; originally announced September 2024.

Enantiospecificity in NMR Enabled by Chirality-Induced Spin Selectivity

Authors: T. Georgiou, J. L. Palma, V. Mujica, S. Varela, M. Galante, V. Santamarıa Garcıa, L. Mboning, R. N. Schwartz, G. Cuniberti, L. -S. Bouchard

Abstract: Spin polarization in chiral molecules is a magnetic molecular response associated with electron transport and enantioselective bond polarization that occurs even in the absence of an external magnetic field. An unexpected finding by Santos and co-workers reported enantiospecific NMR responses in solid-state cross-polarization (CP) experiments, suggesting a possible additional contribution to the i… ▽ More Spin polarization in chiral molecules is a magnetic molecular response associated with electron transport and enantioselective bond polarization that occurs even in the absence of an external magnetic field. An unexpected finding by Santos and co-workers reported enantiospecific NMR responses in solid-state cross-polarization (CP) experiments, suggesting a possible additional contribution to the indirect nuclear spin-spin coupling in chiral molecules induced by bond polarization in the presence of spin-orbit coupling. Herein we provide a theoretical treatment for this phenomenon, presenting an effective spin-Hamiltonian for helical molecules like DNA and density functional theory (DFT) results on amino acids that confirm the dependence of J-couplings on the choice of enantiomer. The connection between nuclear spin dynamics and chirality could offer insights for molecular sensing and quantum information sciences. These results establish NMR as a potential tool for chiral discrimination without external agents. △ Less

Submitted 2 July, 2024; v1 submitted 30 June, 2024; originally announced July 2024.

Comments: 102 pages, 16 figures, 40 tables

Structural changes in Ge1-xSnx and Si1-x-yGeySnx thin films on SOI substrates treated by pulse laser annealing

Authors: Oliver Steuer, Daniel Schwarz, Michael Oehme, Florian Bärwolf, Yu Cheng, Fabian Ganss, René Hübner, René Heller, Shengqiang Zhou, Manfred Helm, Gianaurelio Cuniberti, Yordan M. Georgiev, Slawomir Prucnal

Abstract: Ge1-xSnx and Si1-x-yGeySnx alloys are promising materials for future opto- and nanoelectronics applications. These alloys enable effective band-gap engineering, broad adjustability of their lattice parameter, exhibit much higher carrier mobility than pure Si, and are compatible with the CMOS technology. Unfortunately, the equilibrium solid solubility of Sn in Si1-xGex is less than 1% and the pseud… ▽ More Ge1-xSnx and Si1-x-yGeySnx alloys are promising materials for future opto- and nanoelectronics applications. These alloys enable effective band-gap engineering, broad adjustability of their lattice parameter, exhibit much higher carrier mobility than pure Si, and are compatible with the CMOS technology. Unfortunately, the equilibrium solid solubility of Sn in Si1-xGex is less than 1% and the pseudomorphic growth of Si1-x-yGeySnx on Ge or Si can cause in-plane compressive strain in the grown layer, degrading the superior properties of these alloys. Therefore, post-growth strain engineering by ultrafast non-equilibrium thermal treatments like pulse laser annealing (PLA) is needed to improve the layer quality. In this article, Ge0.94Sn0.06 and Si0.14Ge0.8Sn0.06 thin films grown on silicon-on-insulator substrates by molecular beam epitaxy were post growth thermally treated by PLA. The material is analyzed before and after the thermal treatments by transmission electron microscopy, X-ray diffraction (XRD), Rutherford backscattering spectrometry, secondary ion mass spectrometry, and Hall effect measurements. It is shown that after annealing, the material is single-crystalline with improved crystallinity than the as-grown layer. This is reflected in a significantly increased XRD reflection intensity, well-ordered atomic pillars, and increased active carrier concentrations up to 4x1019 cm-3. △ Less

Submitted 13 June, 2024; originally announced June 2024.

Si1-x-yGeySnx alloy formation by Sn ion implantation and flash lamp annealing

Authors: Oliver Steuer, Michail Michailow, René Hübner, Krzysztof Pyszniak, Marcin Turek, Ulrich Kentsch, Fabian Ganss, Muhammad Moazzam Khan, Lars Rebohle, Shengqiang Zhou, Joachim Knoch, Manfred Helm, Gianaurelio Cuniberti, Yordan M. Georgiev, Slawomir Prucnal

Abstract: For many years, Si1-yGey alloys have been applied in the semiconductor industry due to the ability to adjust the performance of Si-based nanoelectronic devices. Following this alloying approach of group-IV semiconductors, adding tin (Sn) into the alloy appears as the obvious next step, which leads to additional possibilities for tailoring the material properties. Adding Sn enables effective band g… ▽ More For many years, Si1-yGey alloys have been applied in the semiconductor industry due to the ability to adjust the performance of Si-based nanoelectronic devices. Following this alloying approach of group-IV semiconductors, adding tin (Sn) into the alloy appears as the obvious next step, which leads to additional possibilities for tailoring the material properties. Adding Sn enables effective band gap and strain engineering and can improve the carrier mobilities, which makes Si1-x-yGeySnx alloys promising candidates for future opto- and nanoelectronics applications. The bottom-up approach for epitaxial growth of Si1-x-yGeySnx, e.g., by chemical vapor deposition and molecular beam epitaxy, allows tuning the material properties in the growth direction only; the realization of local material modifications to generate lateral heterostructures with such a bottom-up approach is extremely elaborate, since it would require the use of lithography, etching, and either selective epitaxy or epitaxy and chemical-mechanical polishing giving rise to interface issues, non-planar substrates, etc. This article shows the possibility of fabricating Si1-x-yGeySnx alloys by Sn ion beam implantation into Si1-yGey layers followed by millisecond-range flash lamp annealing (FLA). The materials are investigated by Rutherford backscattering spectrometry, micro Raman spectroscopy, X-ray diffraction, and transmission electron microscopy. The fabrication approach was adapted to ultra-thin Si1-yGey layers on silicon-on-insulator substrates. The results show the fabrication of single-crystalline Si1-x-yGeySnx with up to 2.3 at.% incorporated Sn without any indication of Sn segregation after recrystallization via FLA. Finally, we exhibit the possibility of implanting Sn locally in ultra-thin Si1-yGey films by masking unstructured regions on the chip. △ Less

Submitted 13 June, 2024; originally announced June 2024.

Network-theory based modeling of avalanche dynamics in percolative tunnelling networks

Authors: Vivek Dey, Steffen Kampman, Rafael Gutierrez, Gianaurelio Cuniberti, Pavan Nukala

Abstract: Brain-like self-assembled networks can infer and analyze information out of unorganized noisy signals with minimal power consumption. These networks are characterized by spatiotemporal avalanches and their crackling behavior, and their physical models are expected to predict and understand their computational capabilities. Here, we use a network theory-based approach to provide a physical model fo… ▽ More Brain-like self-assembled networks can infer and analyze information out of unorganized noisy signals with minimal power consumption. These networks are characterized by spatiotemporal avalanches and their crackling behavior, and their physical models are expected to predict and understand their computational capabilities. Here, we use a network theory-based approach to provide a physical model for percolative tunnelling networks, found in Ag-hBN system, consisting of nodes (atomic clusters) of Ag intercalated in the hBN van der Waals layers. By modeling a single edge plasticity through constitutive electrochemical filament formation, and annihilation through Joule heating, we identify independent parameters that determine the network connectivity. We construct a phase diagram and show that a small region of the parameter space contains signals which are long-range temporally correlated, and only a subset of them contains crackling avalanche dynamics. Physical systems spontaneously selforganize to this region for possibly maximizing the efficiency of information transfer. △ Less

Submitted 29 April, 2024; originally announced April 2024.

Comments: 16 pages, 6 figures

On-liquid-gallium surface synthesis of ultra-smooth conductive metal-organic framework thin films

Authors: Jinxin Liu, Yunxu Chen, Xing Huang, Yanhan Ren, Mike Hambsch, David Bodesheim, Darius Pohl, Xiaodong Li, Marielle Deconinck, Bowen Zhang, Markus Löffler, Zhongquan Liao, Fengxiang Zhao, Arezoo Dianat, Gianaurelio Cuniberti, Yana Vaynzof, Junfeng Gao, Jingcheng Hao, Stefan C. B. Mannsfeld, Xinliang Feng, Renhao Dong

Abstract: Conductive metal-organic frameworks (MOFs) are emerging electroactive materials for (opto-)electronics. However, it remains a great challenge to achieve reliable MOF-based devices via the existing synthesis methods that are compatible with the complementary metal-oxide-semiconductor technology, as the surface roughness of thus-far synthetic MOF films or pellets is rather high for efficient electro… ▽ More Conductive metal-organic frameworks (MOFs) are emerging electroactive materials for (opto-)electronics. However, it remains a great challenge to achieve reliable MOF-based devices via the existing synthesis methods that are compatible with the complementary metal-oxide-semiconductor technology, as the surface roughness of thus-far synthetic MOF films or pellets is rather high for efficient electrode contact. Here, we develop an on-liquid-gallium surface synthesis (OLGSS) strategy under chemical vapor deposition (CVD) conditions for the controlled growth of two-dimensional conjugated MOF (2D c-MOF) thin films with ten-fold improvement of surface flatness (surface roughness can reach as low as ~2 Å) compared with MOF films grown by the traditional methods. Supported by theoretical modeling, we unveil a layer-by-layer CVD growth mode for constructing flattening surfaces, that is triggered by the high adhesion energy between gallium (Ga) and planar aromatic ligands. We further demonstrate the generality of the as-proposed OLGSS strategy by reproducing such a flat surface over nine different 2D c-MOF films with variable thicknesses (~2 to 208 nm) and large lateral sizes (over 1 cm2). The resultant ultra-smooth 2D c-MOF films enable the formation of high-quality electrical contacts with gold (Au) electrodes, leading to a reduction of contact resistance by over ten orders of magnitude compared to the traditional uneven MOF films. Furthermore, due to the efficient interfacial interaction benifited from the high-quality contacts, the prepared van der Waals heterostructure (vdWH) of OLGSS c-MOF and MoS2 exhibits intriguing photoluminescence (PL) enhancement, PL peak shift and large work function modulation. The establishment of the reliable OLGSS method provides the chances to push the development of MOF electronics and the construction of multicomponent MOF-based heterostructure materials. △ Less

Submitted 17 April, 2024; originally announced April 2024.

Electronic quantum wires in extended quasiparticle picture

Authors: Klaus Morawetz, Vinod Ashokan, Kare Narain Pathak, Neil Drummond, Gianaurelio Cuniberti

Abstract: A one-dimensional quantum wire of Fermions is considered and ground state properties are calculated in the high density regime within the extended quasiparticle picture and Born approximation. Expanding the two-particle Green functions determines the selfenergy and the polarization as well as the response function on the same footing. While the on-shell selfenergies are strictly zero due to Pauli-… ▽ More A one-dimensional quantum wire of Fermions is considered and ground state properties are calculated in the high density regime within the extended quasiparticle picture and Born approximation. Expanding the two-particle Green functions determines the selfenergy and the polarization as well as the response function on the same footing. While the on-shell selfenergies are strictly zero due to Pauli-blocking of elastic scattering, the off-shell behaviour shows a rich structure of a gap in the damping of excitation which is closed when the momentum approaches the Fermi one. The consistent spectral function is presented completing the first two energy-weighted sum rules. The excitation spectrum shows a splitting due to holons and antiholons as non-Fermi liquid behaviour. A renormalization procedure is proposed by subtracting an energy constant to render the Fock exchange energy finite. The effective mass derived from meanfield shows a dip as onset of Peierls instability. The correlation energy is calculated with the help of the extended quasiparticle picture which accounts for off-shell effects. The corresponding response function leads to the same correlation energy as the selfenergy in agreement with perturbation theory. The reduced density matrix or momentum distribution is calculated with the help of a Padé regularization repairing deficiencies of the perturbation theory. A seemingly finite step at the Fermi energy indicating Fermi-liquid behaviour is repaired in this way. △ Less

Submitted 15 April, 2024; v1 submitted 4 November, 2023; originally announced November 2023.

Comments: In memory of Paul Ziesche (1933-2022)

Journal ref: Physical Review B 109 (2024) 205116

Electron Spin Polarization as a Predictor of Chiroptical Activity in Helical Molecules

Authors: Solmar Varela, Rafael Gutierrez, Gianaurelio Cuniberti, Ernesto Medina, Vladimiro Mujica

Abstract: Chiral structures, breaking spatial inversion symmetry, exhibit non-zero chiroptical activity (COA) due to the interaction between their electric and magnetic responses under external electromagnetic fields, an effect that is otherwise absent in achiral systems. Non-magnetic chiral structures also exhibit Chiral Induced Spin Selectivity (CISS), where spin-polarization (SP) emerges without external… ▽ More Chiral structures, breaking spatial inversion symmetry, exhibit non-zero chiroptical activity (COA) due to the interaction between their electric and magnetic responses under external electromagnetic fields, an effect that is otherwise absent in achiral systems. Non-magnetic chiral structures also exhibit Chiral Induced Spin Selectivity (CISS), where spin-polarization (SP) emerges without external magnetic influence. We have obtained a COA-SP connection for a model system of an electron constrained to a helix including spin-orbit coupling (SOC), and in the presence of an external electromagnetic field. Despite its simplicity, this model captures the relevant physics required to address the problem. In particular, our results reveal that the norm of the SP vector can be used as a predictor of COA. In addition to SOC and the breaking of space inversion, a non-vanishing SP requires the breaking of time-reversal symmetry (TRS), as demanded by Onsager's reciprocity. Beyond the relationship between SP and COA, we obtain the novel result that TRS breaking is also necessary to yield a non-vanishing contribution of the SOC to the COA. △ Less

Submitted 2 September, 2023; originally announced September 2023.

Comments: 23 pages, 6 figures

MSC Class: 74F15; 81Q99; 81V99

Hierarchies of Hofstadter butterflies in 2D covalent-organic frameworks

Authors: David Bodesheim, Robert Biele, Gianaurelio Cuniberti

Abstract: The Hofstadter butterfly is one of the first and most fascinating examples of the fractal and self-similar quantum nature of free electrons in a lattice pierced by a perpendicular magnetic field. However, the direct experimental verification of this effect on single-layer materials is still missing as very strong and inaccessible magnetic fields are necessary. For this reason, its indirect experim… ▽ More The Hofstadter butterfly is one of the first and most fascinating examples of the fractal and self-similar quantum nature of free electrons in a lattice pierced by a perpendicular magnetic field. However, the direct experimental verification of this effect on single-layer materials is still missing as very strong and inaccessible magnetic fields are necessary. For this reason, its indirect experimental verification has only been realized in artificial periodic 2D systems, like moiré lattices. The only recently synthesized 2D covalent-organic frameworks might circumvent this limitation: Due to their large pore structures, magnetic fields needed to detect most features of the Hofstadter butterfly are indeed accessible with today's technology. This work opens the door to making this exotic and theoretical issue from the 70s measurable and might solve the quest for the experimental verification of the Hofstadter butterfly in single-layer materials. Moreover, the intrinsic hierarchy of different pore sizes in a 2D covalent-organic framework adds additional complexity and beauty to the original butterflies and leads to a directly accessible playground for new physical observations. △ Less

Submitted 6 November, 2022; originally announced November 2022.

Electrokinetic Janus micromotors moving on topographically flat chemical patterns

Authors: Tao Huang, Vyacheslav R. Misko, Anja Caspari, Alla Synytska, Bergoi Ibarlucea, Franco Nori, Jürgen Fassbender, Gianaurelio Cuniberti, Denys Makarov, Larysa Baraban

Abstract: Ionic and molecular selectivity is considered unique for the nanoscale and not realizable in microfluidics. This is due to the scale-matching problem -- a difficulty to match the dimensions of ions and electrostatic potential screening lengths with the micron-sized confinements. Here, we demonstrate a microscale realization of the ionic transport processes closely resembling those specific to ioni… ▽ More Ionic and molecular selectivity is considered unique for the nanoscale and not realizable in microfluidics. This is due to the scale-matching problem -- a difficulty to match the dimensions of ions and electrostatic potential screening lengths with the micron-sized confinements. Here, we demonstrate a microscale realization of the ionic transport processes closely resembling those specific to ionic channels or in nanofluidic junctions, including selectivity, guidance through complex geometries and flow focusing. As a model system, we explore electrokinetic spherical Janus micromotors moving over charged surfaces with a complex spatial charge distribution and without any topographical wall. We discuss peculiarities of the long-range electrostatic interaction on the behavior of the system including interface crossing and reflection of positively charged particles from negatively charged interfaces. These results are crucial for understanding the electrokinetic transport of biochemical species under confinement, have the potential to increase the precision of lab-on-chip-based assays, as well as broadening use cases and control strategies of nano-/micromachinery. △ Less

Submitted 12 September, 2022; originally announced September 2022.

Comments: 15 pages, 6 figures

Journal ref: Communications Materials 3, 60 (2022)

Towards coarse-grained elasticity of single-layer Covalent Organic Frameworks

Authors: Alexander Croy, Antonios Raptakis, David Bodesheim, Arezoo Dianat, Gianaurelio Cuniberti

Abstract: Two-dimensional covalent organic frameworks (2D COFs) are an interesting class of 2D materials since their reticular synthesis allows the tailored design of structures and functionalities. For many of their applications the mechanical stability and performance is an important aspect. Here, we use a computational approach involving a density-functional based tight-binding method to calculate the in… ▽ More Two-dimensional covalent organic frameworks (2D COFs) are an interesting class of 2D materials since their reticular synthesis allows the tailored design of structures and functionalities. For many of their applications the mechanical stability and performance is an important aspect. Here, we use a computational approach involving a density-functional based tight-binding method to calculate the in-plane elastic properties of about 40 COFs with a honeycomb lattice. Based on those calculations, we develop two coarse-grained descriptions: one based on a spring network and the second using a network of elastic beams. The models allow us to connect the COF force constants to the molecular force constants of the linker molecules and thus enable an efficient description of elastic deformations. To illustrate this aspect, we calculate the deformation energy of different COFs containing the equivalent of a Stone-Wales defect and find very good agreement with the coarse-grained description. △ Less

Submitted 14 July, 2022; originally announced July 2022.

Comments: 17 pages, 6 figures + supplementary information

Journal ref: J. Phys. Chem. C 2022, 126, 44, 18943-18951

Atomistic Modelling of Energy Dissipation in Nanoscale Gears

Authors: Huang-Hsiang Lin, Alexander Croy, Rafael Gutierrez, Gianaurelio Cuniberti

Abstract: Molecule- and solid-state gears build the elementary constituents of nanoscale mechanical machineries. Recent experimental advances in fabrication technologies in the field have strongly contributed to better delineate the roadmap towards the ultimate goal of engineering molecular-scale mechanical devices. To complement experimental studies, computer simulations play an invaluable role, since they… ▽ More Molecule- and solid-state gears build the elementary constituents of nanoscale mechanical machineries. Recent experimental advances in fabrication technologies in the field have strongly contributed to better delineate the roadmap towards the ultimate goal of engineering molecular-scale mechanical devices. To complement experimental studies, computer simulations play an invaluable role, since they allow to address, with atomistic resolution, various fundamental issues such as the transmission of angular momentum in nanoscale gear trains and the mechanisms of energy dissipation at such length scales. We review in this chapter our work addressing the latter problem. Our computational approach is based on classical atom-istic Molecular Dynamics simulations. Two basic problems are discussed: (i) the dominant energy dissipation channels of a rotating solid-state nanogear adsorbed on a surface, and (ii) the transmission of rotational motion and frictional processes in a heterogeneous gear pair consisting of a graphene nanodisk and a molecular-scale gear. △ Less

Submitted 9 May, 2022; originally announced May 2022.

Effect of Lubricants on the Rotational Transmission between Solid-State Gears

Authors: Huang-Hsiang Lin, Jonathan Heinze, Alexander Croy, Rafael Gutiérrez, Gianaurelio Cuniberti

Abstract: Lubricants are widely used in macroscopic mechanical systems to reduce friction and wear. However, on the microscopic scale, it is not clear to what extent lubricants are beneficial. Therefore, in this study, we consider two diamond solid-state gears at the nanoscale immersed in different lubricant molecules and perform classical MD simulations to investigate the rotational transmission of motion.… ▽ More Lubricants are widely used in macroscopic mechanical systems to reduce friction and wear. However, on the microscopic scale, it is not clear to what extent lubricants are beneficial. Therefore, in this study, we consider two diamond solid-state gears at the nanoscale immersed in different lubricant molecules and perform classical MD simulations to investigate the rotational transmission of motion. We find that lubricants can help to synchronize the rotational transmission between gears regardless of the molecular species and the center-of-mass distance. Moreover, the influence of the angular velocity of the driving gear is investigated and shown to be related to the bond formation process between gears. △ Less

Submitted 25 August, 2021; originally announced August 2021.

A Nanographene Disk Rotating a single Molecule Gear on a Cu(111) Surface

Authors: Huang-Hsiang Lin, Alexander Croy, Rafael Gutiérrez, Christian Joachim, Gianaurelio Cuniberti

Abstract: Lubricants are widely used in macroscopic mechanical systems to reduce friction and wear. However, on the microscopic scale, it is not clear to what extent lubricants are beneficial. Therefore, in this study, we consider two diamond solid-state gears at the nanoscale immersed in different lubricant molecules and perform classical MD simulations to investigate the rotational transmission of motion.… ▽ More Lubricants are widely used in macroscopic mechanical systems to reduce friction and wear. However, on the microscopic scale, it is not clear to what extent lubricants are beneficial. Therefore, in this study, we consider two diamond solid-state gears at the nanoscale immersed in different lubricant molecules and perform classical MD simulations to investigate the rotational transmission of motion. We find that lubricants can help to synchronize the rotational transmission between gears regardless of the molecular species and the center-of-mass distance. Moreover, the influence of the angular velocity of the driving gear is investigated and shown to be related to the bond formation process between gears. △ Less

Submitted 26 August, 2021; v1 submitted 25 August, 2021; originally announced August 2021.

The contribution of intermolecular spin interactions to the London dispersion forces between chiral molecules

Authors: M. Geyer, R. Gutierrez, V. Mujica, J. F. Rivas Silva, A. Dianat, G. Cuniberti

Abstract: Dispersion interactions are one of the components of van der Waals (vdW) forces, which play a key role in the understanding of intermolecular interactions in many physical, chemical and biological processes. The theory of dispersion forces was developed by London in the early years of quantum mechanics. However, it was only in the 1960s that it was recognized that for molecules lacking an inversio… ▽ More Dispersion interactions are one of the components of van der Waals (vdW) forces, which play a key role in the understanding of intermolecular interactions in many physical, chemical and biological processes. The theory of dispersion forces was developed by London in the early years of quantum mechanics. However, it was only in the 1960s that it was recognized that for molecules lacking an inversion center such as chiral and helical molecules, there are chirality-sensitive corrections to the dispersion forces proportional to the rotatory power known from the theory of circular dichroism and with the same distance scaling law R-6 as the London energy. The discovery of the Chirality-Induced Spin Selectivity (CISS) effect in recent years has led to an additional twist in the study of chiral molecular systems, showing a close relation between spin and molecular geometry. Motivated by it, we propose in this investigation to describe the mutual induction of charge and spin-density fluctuations in a pair A-B of chiral molecules by a simple physical model. The model assumes that the same fluctuating electric fields responsible for vdW forces can induce a magnetic response via a Rashba-like term, so that an spin-orbit field acting on molecule B is generated by the electric field arising from charge density fluctuations in molecule A (and viceversa). Within a second-order perturbative approach, these contributions manifest as an effective intermolecular exchange interaction. Although expected to be weaker than the standard London forces, these interactions display the same R$^6$ distance scaling. △ Less

Submitted 9 May, 2022; v1 submitted 11 June, 2021; originally announced June 2021.

Comments: 21 pages, 2 figures

Role of Exchange Interactions in the Magnetic Response and Intermolecular Recognition of Chiral Molecules

Authors: Arezoo Dianat, Rafael Gutierrez, Hen Alpern, Vladimiro Mujica, Amir Ziv, Shira Yochelis, Oded Millo, Yossi Paltiel, Gianaurelio Cuniberti

Abstract: The physical origin of the so-called chirality-induced spin selectivity (CISS) effect has puzzled experimental and theoretical researchers over the past few years. Early experiments were interpreted in terms of unconventional spin-orbit interactions mediated by the helical geometry. However, more recent experimental studies have clearly revealed that electronic exchange interactions also play a ke… ▽ More The physical origin of the so-called chirality-induced spin selectivity (CISS) effect has puzzled experimental and theoretical researchers over the past few years. Early experiments were interpreted in terms of unconventional spin-orbit interactions mediated by the helical geometry. However, more recent experimental studies have clearly revealed that electronic exchange interactions also play a key role in the magnetic response of chiral molecules in singlet states. In this investigation, we use spin-polarized closed shell density functional theory calculations to address the influence of exchange contributions to the interaction between helical molecules as well as of helical molecules with magnetized substrates. We show that exchange effects result in differences in the interaction properties with magnetized surfaces, shedding light into the possible origin of two recent important experimental results: enantiomer separation and magnetic exchange force microscopy with AFM tips functionalized with helical peptides. △ Less

Submitted 7 April, 2021; originally announced April 2021.

Journal ref: Nano Lett. 2020, 20, 10, 7077-7086

Inverse Solidification Induced by Active Janus Particles

Authors: Tao Huang, Vyacheslav R. Misko, Sophie Gobeil, Xu Wang, Franco Nori, Julian Schütt, Jürgen Fassbender, Gianaurelio Cuniberti, Denys Makarov, Larysa Baraban

Abstract: Crystals melt when thermal excitations or the concentration of defects in the lattice is sufficiently high. Upon melting, the crystalline long-range order vanishes, turning the solid to a fluid. In contrast to this classical scenario of solid melting, here we demonstrate a counter-intuitive behavior of the occurrence of crystalline long-range order in an initially disordered matrix. This unusual s… ▽ More Crystals melt when thermal excitations or the concentration of defects in the lattice is sufficiently high. Upon melting, the crystalline long-range order vanishes, turning the solid to a fluid. In contrast to this classical scenario of solid melting, here we demonstrate a counter-intuitive behavior of the occurrence of crystalline long-range order in an initially disordered matrix. This unusual solidification is demonstrated in a system of passive colloidal particles accommodating chemically active defects -- photocatalytic Janus particles. The observed crystallization occurs when the amount of active-defect-induced fluctuations (which is the measure of the effective temperature) reaches critical value. The driving mechanism behind this unusual behavior is purely internal and resembles a blast-induced solidification. Here the role of "internal micro-blasts" is played by the photochemical activity of defects residing in the colloidal matrix. The defect-induced solidification occurs under non-equilibrium conditions: the resulting solid exists as long as a constant supply of energy in the form of ion flow is provided by the catalytic photochemical reaction at the surface of active Janus particle defects. Our findings could be useful for understanding of the phase transitions of matter under extreme conditions far from thermodynamic equilibrium. △ Less

Submitted 8 October, 2020; originally announced October 2020.

Comments: 14 pages, 4 figures

Journal ref: Adv. Funct. Mater. 2003851 (2020); Featured in the AFM Inside Front Cover

Surface phonon induced rotational dissipation for nanoscale solid-state gears

Authors: Huang-Hsiang Lin, Alexander Croy, Rafael Gutierrez, Gianaurelio Cuniberti

Abstract: Compared to nanoscale friction of translational motion, the mechanisms of rotational friction have received less attention. Such motion becomes an important issue for the miniaturization of mechanical machineries which often involve rotating gears. In this study, molecular dynamics simulations are performed to explore rotational friction for solid-state gears rotating on top of different substrate… ▽ More Compared to nanoscale friction of translational motion, the mechanisms of rotational friction have received less attention. Such motion becomes an important issue for the miniaturization of mechanical machineries which often involve rotating gears. In this study, molecular dynamics simulations are performed to explore rotational friction for solid-state gears rotating on top of different substrates. In each case, viscous damping of the rotational motion is observed and found to be induced by the pure van-der-Waals interaction between gear and substrate. The influence of different gear sizes and various substrate materials is investigated. Furthermore, the rigidities of the gear and the substrate are found to give rise to different dissipation channels. Finally, it is shown that the dominant contribution to the dissipation is related to the excitation of low-frequency surface-phonons in the substrate. △ Less

Submitted 28 November, 2020; v1 submitted 4 September, 2020; originally announced September 2020.

Journal ref: Phys. Rev. Applied 15, 024053 (2021)

A Chirality-Based Quantum Leap

Authors: Clarice D. Aiello, Muneer Abbas, John M. Abendroth, Andrei Afanasev, Shivang Agarwal, Amartya S. Banerjee, David N. Beratan, Jason N. Belling, Bertrand Berche, Antia Botana, Justin R. Caram, Giuseppe Luca Celardo, Gianaurelio Cuniberti, Aitzol Garcia-Etxarri, Arezoo Dianat, Ismael Diez-Perez, Yuqi Guo, Rafael Gutierrez, Carmen Herrmann, Joshua Hihath, Suneet Kale, Philip Kurian, Ying-Cheng Lai, Alexander Lopez, Ernesto Medina , et al. (19 additional authors not shown)

Abstract: Chiral degrees of freedom occur in matter and in electromagnetic fields and constitute an area of research that is experiencing renewed interest driven by recent observations of the chiral-induced spin selectivity (CISS) effect in chiral molecules and engineered nanomaterials. The CISS effect underpins the fact that charge transport through nanoscopic chiral structures favors a particular electron… ▽ More Chiral degrees of freedom occur in matter and in electromagnetic fields and constitute an area of research that is experiencing renewed interest driven by recent observations of the chiral-induced spin selectivity (CISS) effect in chiral molecules and engineered nanomaterials. The CISS effect underpins the fact that charge transport through nanoscopic chiral structures favors a particular electronic spin orientation, resulting in large room-temperature spin polarizations. Observations of the CISS effect suggest opportunities for spin control and for the design and fabrication of room-temperature quantum devices from the bottom up, with atomic-scale precision. Any technology that relies on optimal charge transport, including quantum devices for logic, sensing, and storage, may benefit from chiral quantum properties. These properties can be theoretically and experimentally investigated from a quantum information perspective, which is presently lacking. There are uncharted implications for the quantum sciences once chiral couplings can be engineered to control the storage, transduction, and manipulation of quantum information. This forward-looking perspective provides a survey of the experimental and theoretical fundamentals of chiral-influenced quantum effects, and presents a vision for their future roles in enabling room-temperature quantum technologies. △ Less

Submitted 11 November, 2021; v1 submitted 31 August, 2020; originally announced September 2020.

Understanding the UV luminescence of zinc germanate: The role of native defects

Authors: Jaime Dolado, Ruth Martínez-Casado, Pedro Hidalgo, Rafael Gutierrez, Arezoo Dianat, Gianaurelio Cuniberti, Francisco Domínguez-Adame, Elena Díaz, Bianchi Méndez

Abstract: Achieving efficient and stable ultraviolet emission is a challenging goal in optoelectronic devices. Herein, we investigate the UV luminescence of zinc germanate Zn2GeO4 microwires by means of photoluminescence measurements as a function of temperature and excitation conditions. The emitted UV light is composed of two bands (a broad one and a narrow one) associated with the native defects structur… ▽ More Achieving efficient and stable ultraviolet emission is a challenging goal in optoelectronic devices. Herein, we investigate the UV luminescence of zinc germanate Zn2GeO4 microwires by means of photoluminescence measurements as a function of temperature and excitation conditions. The emitted UV light is composed of two bands (a broad one and a narrow one) associated with the native defects structure. In addition, with the aid of density functional theory (DFT) calculations, the energy positions of the electronic levels related to native defects in Zn2GeO4 have been calculated. In particular, our results support that zinc interstitials are the responsible for the narrow UV band, which is, in turn, split into two components with different temperature dependence behaviour. The origin of the two components is explained on the basis of the particular location of Zn_i in the lattice and agrees with DFT calculations. Furthermore, a kinetic luminescence model is proposed to ascertain the temperature evolution of this UV emission. These results pave the way to exploit defect engineering in achieving functional optoelectronic devices to operate in the UV region. △ Less

Submitted 30 July, 2020; originally announced July 2020.

Journal ref: Acta Mater. 196, 626--634 (2020)

Inducing the controlled rotation of single o MeO DMBI molecules anchored on Au(111)

Authors: Frank Eisenhut, Jörg Meyer, Justus Krüger, Robin Ohmann, Gianaurelio Cuniberti, Francesca Moresco

Abstract: A key step towards building single molecule machines is to control the rotation of molecules and nanostructures step by step on a surface. Here, we used the tunneling electrons coming from the tip of a scanning tunneling microscope to achieve the controlled directed rotation of complex o-MeO-DMBI molecules. We studied the adsorption of single o-MeO-DMBI molecules on Au(111) by scanning tunneling m… ▽ More A key step towards building single molecule machines is to control the rotation of molecules and nanostructures step by step on a surface. Here, we used the tunneling electrons coming from the tip of a scanning tunneling microscope to achieve the controlled directed rotation of complex o-MeO-DMBI molecules. We studied the adsorption of single o-MeO-DMBI molecules on Au(111) by scanning tunneling microscopy at low temperature. The enantiomeric form of the molecule on the surface can be determined by imaging the molecule by STM at high bias voltage. We observed by lateral manipulation experiments that the molecules chemisorb on the surface and are anchored on Au(111) with an oxygen-gold bond via their methoxy-group. Driven by inelastic tunneling electrons, o-MeO-DMBI molecules can controllably rotate, stepwise and unidirectional, either clockwise or counterclockwise depending on their enantiomeric form. △ Less

Submitted 18 May, 2020; originally announced May 2020.

Mechanical transmission of rotation for molecule gears and solid-state gears

Authors: Huang-Hsiang Lin, Jonathan Heinze, Alexander Croy, Rafael Gutierrez, Gianaurelio Cuniberti

Abstract: The miniaturization of gears towards the nanoscale is a formidable task posing a variety of challenges to current fabrication technologies. In context, the understanding, via computer simulations, of the mechanisms mediating the transfer of rotational motion between nanoscale gears can be of great help to guide the experimental designs. Based on atomistic molecular dynamics simulations in combinat… ▽ More The miniaturization of gears towards the nanoscale is a formidable task posing a variety of challenges to current fabrication technologies. In context, the understanding, via computer simulations, of the mechanisms mediating the transfer of rotational motion between nanoscale gears can be of great help to guide the experimental designs. Based on atomistic molecular dynamics simulations in combination with a nearly rigid-body approximation, we study the transmission of rotational motion between molecule gears and solid-state gears, respectively. For the molecule gears under continuous driving, we identify different regimes of rotational motion depending on the magnitude of the external torque. In contrast, the solid-state gears behave like ideal gears with nearly perfect transmission. Furthermore, we simulate the manipulation of the gears by a scanning-probe tip and we find that the mechanical transmission strongly depends on the center of mass distance between gears. A new regime of transmission is found for the solid-state gears. △ Less

Submitted 21 April, 2020; originally announced April 2020.

Comments: Preprint of a book chapter to be included in the book "Building and Probing Small for Mechanics" edited by C. Joachim

Journal ref: published in C. Joachim (ed.), Building and Probing Small for Mechanics, Advances in Atom and Single Molecule Machines, Springer International Publishing, 2020

Dodecacene Generated on Surface: Re-opening of the Energy Gap

Authors: Frank Eisenhut, Tim Kühne, Fátima García, Saleta Fernández, Enrique Guitián, Dolores Pérez, Georges Trinquier, Gianaurelio Cuniberti, Christian Joachim, Diego Peña, Francesca Moresco

Abstract: The acene series represents a unique model system to investigate the intriguing electronic properties of extended pi electron structures in the one-dimensional limit, which are important for applications in electronics and spintronics and for the fundamental understanding of electronic transport. Here we present the on-surface generation of the longest acene obtained so far: Dodecacene. Scanning t… ▽ More The acene series represents a unique model system to investigate the intriguing electronic properties of extended pi electron structures in the one-dimensional limit, which are important for applications in electronics and spintronics and for the fundamental understanding of electronic transport. Here we present the on-surface generation of the longest acene obtained so far: Dodecacene. Scanning tunneling spectroscopy gives access to the energy position and spatial distribution of its electronic states on the Au(111) surface. We observe that, after a progressive closing of the gap and a stabilization to about 1 eV at the length of decacene and undecacene, the energy gap of dodecacene unexpectedly increases to 1.4 eV. Considering the acene series as an exemplary general case, we discuss the evolution with length of the single tunneling resonances in comparison with ionization energy, electronic affinity, and optical gap. △ Less

Submitted 14 October, 2020; v1 submitted 6 April, 2020; originally announced April 2020.

Journal ref: ACS Nano 14, 1011 (2020)

On-surface synthesis of nitrogen-doped nanographenes with 5-7 membered rings

Authors: Dmitry Skidin, Frank Eisenhut, Marcus Richter, Seddigheh Nikipar, Justus Krüger, Dmitry A. Ryndyk, Reinhard Berger, Gianaurelio Cuniberti, Xinliang Feng, Francesca Moresco

Abstract: We report on the formation of nitrogen-doped nanographenes containing five- and seven-membered rings by thermally induced cyclodehydrogenation on the Au(111) surface. Using scanning tunneling microscopy and supported by calculations, we investigated the structure of precursor and targets, as well as of intermediates. Scanning tunneling spectroscopy shows that the electronic properties of the targe… ▽ More We report on the formation of nitrogen-doped nanographenes containing five- and seven-membered rings by thermally induced cyclodehydrogenation on the Au(111) surface. Using scanning tunneling microscopy and supported by calculations, we investigated the structure of precursor and targets, as well as of intermediates. Scanning tunneling spectroscopy shows that the electronic properties of the target nanographenes are strongly influenced by the additional formation of non-hexagonal rings. △ Less

Submitted 6 April, 2020; originally announced April 2020.

Effective Hamiltonian model for helically constrained quantum systems within adiabatic perturbation theory: application to the Chirality-Induced Spin Selectivity (CISS) Effect

Authors: Matthias Geyer, Rafael Gutierrez, Gianaurelio Cuniberti

Abstract: The chirality-induced spin selectivity (CISS) effect has been confirmed experimentally for a large class of organic molecules. Adequately modeling the effect remains a challenging task, with both phenomenological models and first-principle simulations yielding inconclusive results. Building upon a previously presented model by K. Michaeli and R. Naaman (J. Phys. Chem C 123, 17043 (2019)) we system… ▽ More The chirality-induced spin selectivity (CISS) effect has been confirmed experimentally for a large class of organic molecules. Adequately modeling the effect remains a challenging task, with both phenomenological models and first-principle simulations yielding inconclusive results. Building upon a previously presented model by K. Michaeli and R. Naaman (J. Phys. Chem C 123, 17043 (2019)) we systematically investigate an effective 1-dimensional model derived as the limit of a 3-dimensional quantum system with strong confinement and including spin-orbit coupling. Having a simple analytic structure, such models can be considered a minimal setup for the description of spin-dependent effects. We use adiabatic perturbation theory to provide a mathematically sound approximation procedure applicable to a large class of spin-dependent continuum models. We take advantage of the models simplicity by analyzing its structure to gain a better understanding how the occurrence and magnitude of spin polarization effects relate to the model's parameters and geometry. △ Less

Submitted 19 February, 2020; originally announced February 2020.

Spin-polarized electron transmission in DNA-like systems

Authors: Miguel A. Sierra, David Sanchez, Rafael Gutierrez, Gianaurelio Cuniberti, Francisco Dominguez-Adame, Elena Diaz

Abstract: The helical distribution of the electronic density in chiral molecules, such as DNA and bacteriorhodopsin, has been suggested to induce a spin-orbit coupling interaction that may lead to the so-called chirality-induced spin selectivity (CISS) effect. Key ingredients for the theoretical modelling are, in this context, the helically shaped potential of the molecule and, concomitantly, a Rashba-like… ▽ More The helical distribution of the electronic density in chiral molecules, such as DNA and bacteriorhodopsin, has been suggested to induce a spin-orbit coupling interaction that may lead to the so-called chirality-induced spin selectivity (CISS) effect. Key ingredients for the theoretical modelling are, in this context, the helically shaped potential of the molecule and, concomitantly, a Rashba-like spin-orbit coupling due to the appearance of a magnetic field in the electron reference frame. Symmetries of these models clearly play a crucial role in explaining the observed effect, but a thorough analysis has been largely ignored in the literature. In this work, we present a study of these symmetries and how they can be exploited to enhance chiral-induced spin selectivity in helical molecular systems. △ Less

Submitted 31 December, 2019; originally announced December 2019.

Journal ref: Biomolecules 10, 49 (2020)

Mechanical transmission of rotational motion between molecular-scale gears

Authors: H. -H. Lin, A. Croy, R. Gutierrez, C. Joachim, G. Cuniberti

Abstract: Manipulating and coupling molecule gears is the first step towards realizing molecular-scale mechanical machines. Here, we theoretically investigate the behavior of such gears using molecular dynamics simulations. Within a nearly rigid-body approximation we reduce the dynamics of the gears to the rotational motion around the orientation vector. This allows us to study their behavior based on a few… ▽ More Manipulating and coupling molecule gears is the first step towards realizing molecular-scale mechanical machines. Here, we theoretically investigate the behavior of such gears using molecular dynamics simulations. Within a nearly rigid-body approximation we reduce the dynamics of the gears to the rotational motion around the orientation vector. This allows us to study their behavior based on a few collective variables. Specifically, for a single hexa (4-tert-butylphenyl) benzene molecule we show that the rotational-angle dynamics corresponds to the one of a Brownian rotor. For two such coupled gears, we extract the effective interaction potential and find that it is strongly dependent on the center of mass distance. Finally, we study the collective motion of a train of gears. We demonstrate the existence of three different regimes depending on the magnitude of the driving-torque of the first gear: underdriving, driving and overdriving, which correspond, respectively, to no collective rotation, collective rotation and only single gear rotation. This behavior can be understood in terms of a simplified interaction potential. △ Less

Submitted 16 October, 2019; v1 submitted 15 October, 2019; originally announced October 2019.

Journal ref: Phys. Rev. Applied 13, 034024 (2020)

Electron transport through self-assembled monolayers of tripeptides

Authors: E. Mervinetsky, I. Alshanski, S. Lenfant, D. Guerin, L. Medrano Sandonas, A. Dianat, R. Gutierrez, G. Cuniberti, M. Hurevich, S. Yitzchaik, D. Vuillaume

Abstract: We report how the electron transport through a solid-state metal/Gly-Gly-His tripeptide (GGH) monolayer/metal junction and the metal/GGH work function are modified by the GGH complexation with Cu2+ ions. Conducting AFM is used to measure the current-voltage histograms. The work function is characterized by combining macroscopic Kelvin probe and Kelvin probe force microscopy at the nanoscale. We ob… ▽ More We report how the electron transport through a solid-state metal/Gly-Gly-His tripeptide (GGH) monolayer/metal junction and the metal/GGH work function are modified by the GGH complexation with Cu2+ ions. Conducting AFM is used to measure the current-voltage histograms. The work function is characterized by combining macroscopic Kelvin probe and Kelvin probe force microscopy at the nanoscale. We observe that the Cu2+ ions complexation with the GGH monolayer is highly dependent on the molecular surface density and results in opposite trends. In the case of a high density monolayer the conformational changes are hindered by the proximity of the neighboring peptides, hence forming an insulating layer in response to copper-complexation. Whereas the slightly lower density monolayers allow for the conformational change to a looped peptide wrapping the Cu-ion, which results in a more conductive monolayer. Copper-ion complexation to the high- and low-density monolayers systematically induces an increase of the work functions. Copper-ion complexation to the low-density monolayer induces an increase of electron transport efficiency, while the copper-ion complexation to the high-density monolayer results in a slight decrease of electron transport. Both of the observed trends are in agreement with first-principle calculations. Complexed copper to low density GGH-monolayer induces a new gap state slightly above the Au Fermi energy that is absent in the high density monolayer. △ Less

Submitted 9 April, 2019; originally announced April 2019.

Comments: Full paper with supporting information

Journal ref: J. Phys. Chem. C .123 (14), 9600-9608 (2019)

Combined molecular dynamics and phase-field modelling of crack propagation in defective graphene

Authors: Arne Claus Hansen-Dörr, Lennart Wilkens, Alexander Croy, Arezoo Dianat, Gianaurelio Cuniberti, Markus Kästner

Abstract: In this work, a combined modelling approach for crack propagation in defective graphene is presented. Molecular dynamics (MD) simulations are used to obtain material parameters (Young's modulus and Poisson ratio) and to determine the energy contributions during the crack evolution. The elastic properties are then applied in phase-field continuum simulations which are based on the Griffith energy c… ▽ More In this work, a combined modelling approach for crack propagation in defective graphene is presented. Molecular dynamics (MD) simulations are used to obtain material parameters (Young's modulus and Poisson ratio) and to determine the energy contributions during the crack evolution. The elastic properties are then applied in phase-field continuum simulations which are based on the Griffith energy criterion for fracture. In particular, the influence of point defects on elastic properties and the fracture toughness are investigated. For the latter, we obtain values consistent with recent experimental findings. Further, we discuss alternative definitions of an effective fracture toughness, which accounts for the conditions of crack propagation and establishes a link between dynamic, discrete and continuous, quasi-static fracture processes on MD level and continuum level, respectively. It is demonstrated that the combination of MD and phase-field simulations is a well-founded approach to identify defect-dependent material parameters. △ Less

Submitted 20 March, 2019; originally announced March 2019.

Comments: 11 pages, 9 figures, preprint submitted to Computational Materials Science

Thermal bridging of graphene nanosheets via covalent molecular junctions. a Non-Equilibrium Green Functions Density Functional Tight-Binding study

Authors: Diego Martinez, Alessandro di Pierro, Alessandro Pecchia, Leonardo Medrano Sandonas, Rafael Gutierrez, Mar Bernal, Bohayra Mortazavi, Gianaurelio Cuniberti, Guido Saracco, Alberto Fina

Abstract: Despite the uniquely high thermal conductivity of graphene is well known, the exploitation of graphene into thermally conductive nanomaterials and devices is limited by the inefficiency of thermal contacts between the individual nanosheets. A fascinating yet experimentally challenging route to enhance thermal conductance at contacts between graphene nanosheets is through molecular junctions, allow… ▽ More Despite the uniquely high thermal conductivity of graphene is well known, the exploitation of graphene into thermally conductive nanomaterials and devices is limited by the inefficiency of thermal contacts between the individual nanosheets. A fascinating yet experimentally challenging route to enhance thermal conductance at contacts between graphene nanosheets is through molecular junctions, allowing covalently connecting nanosheets otherwise interacting only via weak Van der Waals forces. Beside the bare existence of covalent connections, the choice of molecular structures to be used as thermal junctions should be guided by their vibrational properties, in terms of phonon transfer through the molecular junction. In this paper, density functional tight-binding combined with Green functions formalism was applied for the calculation of thermal conductance and phonon spectra of several different aliphatic and aromatic molecular junctions between graphene nanosheets. Effect of molecular junction length, conformation, and aromaticity were studied in detail and correlated with phonon tunnelling spectra. The theoretical insight provided by this work can guide future experimental studies to select suitable molecular junctions in order to enhance the thermal transport by suppressing the interfacial thermal resistances, particularly attractive for various systems, including graphene nanopapers and graphene polymer nanocomposites, as well as related devices. In a broader view, the possibility to design molecular junctions to control phonon transport currently appears as an efficient way to produce phononic devices and controlling heat management in nanostructures. △ Less

Submitted 25 February, 2019; v1 submitted 8 January, 2019; originally announced January 2019.

Journal ref: Martinez Gutierrez, D., Di Pierro, A., Pecchia, A. et al. Nano Res. (2019). https://doi.org/10.1007/s12274-019-2290-2. https://rdcu.be/bow2d

First-principles investigation of Ag-, Co-, Cr-, Cu-, Fe-, Mn-, Ni-, Pd- and Rh-hexaaminobenzene 2D metal-organic frameworks

Authors: Bohayra Mortazavi, Masoud Shahrokhi, Meysam Makaremi, Gianaurelio Cuniberti, Timon Rabczuk

Abstract: In the latest experimental advances, Ni-, Co- and Cu-HAB MOFs were synthesized in 2D forms, with high electrical conductivities and capacitances as well. Motivated by these experimental advances, we employed first-principles simulations to explore the mechanical, thermal stability and electronic properties of single-layer Ag-, Co-, Cr-, Cu-, Fe-, Mn-, Ni-, Pd- and Rh-HAB MOFs. Theoretical results… ▽ More In the latest experimental advances, Ni-, Co- and Cu-HAB MOFs were synthesized in 2D forms, with high electrical conductivities and capacitances as well. Motivated by these experimental advances, we employed first-principles simulations to explore the mechanical, thermal stability and electronic properties of single-layer Ag-, Co-, Cr-, Cu-, Fe-, Mn-, Ni-, Pd- and Rh-HAB MOFs. Theoretical results reveal that Co-, Cr-, Fe-, Mn-, Ni-, Pd- and Rh-HAB nanosheets exhibit linear elasticity with considerable tensile strengths. Ab-initio molecular dynamics results confirm the high thermal stability of all studied nanomembranes. Co- and Fe-HAB monolayers show metallic behavior with low spin-polarization at the Fermi level. Single-layer Ag-, Cu-, Cr-, and Mn-HAB however yield perfect half-metallic behaviors, thus can be promising candidates for the spintronics. In contrast, Ni-, Pd- and Rh-HAB monolayers exhibit nonmagnetic metallic behavior. The insights provided by this investigation confirm the stability and highlight the outstanding physics of transition metal-HAB nanosheets, which are not only highly attractive for the energy storage systems, but may also serve for other advanced applications, like spintronics. △ Less

Submitted 2 November, 2018; originally announced November 2018.

Journal ref: Materials Today Energy 2018

Spin dependent conductance of a quantum dot side attached to topological superconductors as a probe of Majorana fermion states

Authors: D. Krychowski, S. Lipiński, G. Cuniberti

Abstract: Spin-polarized transport through a quantum dot side attached to a topological superconductor and coupled to a pair of normal leads is discussed in Coulomb and Kondo regimes. For discussion of Coulomb range equation of motion method with extended Hubbard I approximation is used and Kondo regime is analyzed by Kotliar-Ruckenstein slave boson approach. Apart from the occurrence of zero bias anomaly t… ▽ More Spin-polarized transport through a quantum dot side attached to a topological superconductor and coupled to a pair of normal leads is discussed in Coulomb and Kondo regimes. For discussion of Coulomb range equation of motion method with extended Hubbard I approximation is used and Kondo regime is analyzed by Kotliar-Ruckenstein slave boson approach. Apart from the occurrence of zero bias anomaly the presence of Majorana states reflects also in splitting of Coulomb lines. In the region of Coulomb borders the spin dependent negative differential conductance is observed. Due to the low energy scale of Kondo effect this probe allows for detection of Majorana states even for extremely weak coupling with topological wire. In this range no signatures of Majorana states appear in Coulomb blockade dominated transport. △ Less

Submitted 13 December, 2017; originally announced December 2017.

Comments: 3 pages, 3 figures

Time-dependent framework for energy and charge currents in nanoscale systems

Authors: Thomas Lehmann, Alexander Croy, Rafael Gutiérrez, Gianaurelio Cuniberti

Abstract: The calculation of time-dependent charge and energy currents in nanoscale systems is a challenging task. Nevertheless it is crucial for gaining a deep understanding of the relevant processes at the nanoscale. We extend the auxiliary-mode approach for time-dependent charge transport to allow for the calculation of energy currents for arbitrary time-dependencies. We apply the approach to two illustr… ▽ More The calculation of time-dependent charge and energy currents in nanoscale systems is a challenging task. Nevertheless it is crucial for gaining a deep understanding of the relevant processes at the nanoscale. We extend the auxiliary-mode approach for time-dependent charge transport to allow for the calculation of energy currents for arbitrary time-dependencies. We apply the approach to two illustrative examples, a single-level system and a benzene ring, demonstrating its usefulness for a wide-range of problems beyond simple toy models, such as molecular devices. △ Less

Submitted 18 January, 2018; v1 submitted 2 December, 2017; originally announced December 2017.

Edge magnetism impact on electrical conductance and thermoelectric properties of graphenelike nanoribbons

Authors: Stefan Krompiewski, Gianaurelio Cuniberti

Abstract: Edge states in narrow quasi two-dimensional nanostructures determine, to a large extent, their electric, thermoelectric and magnetic properties. Non-magnetic edge states may quite often lead to topological insulator type behavior. However another scenario develops when the zigzag edges are magnetic and the time reversal symmetry is broken. In this work we report on the electronic band structure mo… ▽ More Edge states in narrow quasi two-dimensional nanostructures determine, to a large extent, their electric, thermoelectric and magnetic properties. Non-magnetic edge states may quite often lead to topological insulator type behavior. However another scenario develops when the zigzag edges are magnetic and the time reversal symmetry is broken. In this work we report on the electronic band structure modifications, electrical conductance and thermoelectric properties of narrow zigzag nanoribbons with spontaneously magnetized edges. Theoretical studies based on the Kane-Mele- Hubbard tight-binding model show that for silicene, germanene and stanene both the Seebeck coefficient and the thermoelectric power factor are strongly enhanced for energies close to the charge neutrality point. Perpendicular gate voltage lifts the spin degeneracy of energy bands in the ground state with antiparallel magnetized zigzag edges and makes the electrical conductance significantly spin-polarized. Simultaneously the gate voltage worsens the thermoelectric performance. Estimated room-temperature figures of merit for the aforementioned nanoribbons can exceed a value of 3 if phonon thermal conductances are adequately reduced. △ Less

Submitted 28 October, 2017; originally announced October 2017.

Comments: 6 pages, 8 figures

Journal ref: Phys. Rev. B 96, 155447 (2017)

A Structural Insight into Mechanical Strength of Graphene-like Carbon and Carbon Nitride Networks

Authors: Obaidur Rahaman, Bohayra Mortazavi, Arezoo Dianat, Gianaurelio Cuniberti, Timon Rabczuk

Abstract: Graphene, one of the strongest materials ever discovered, triggered the exploration of many 2D materials in the last decade. However, the successful synthesis of a stable nanomaterial requires a rudimentary understanding of the relationship between its structure and strength. In the present study, we investigate the mechanical properties of 8 different carbon-based 2D nanomaterials by performing e… ▽ More Graphene, one of the strongest materials ever discovered, triggered the exploration of many 2D materials in the last decade. However, the successful synthesis of a stable nanomaterial requires a rudimentary understanding of the relationship between its structure and strength. In the present study, we investigate the mechanical properties of 8 different carbon-based 2D nanomaterials by performing extensive density functional theory calculations. The considered structures were just recently either experimentally synthesized or theoretically predicted. The corresponding stress-strain curves and elastic moduli are reported. They can be useful in training force field parameters for large scale simulations. A comparative analysis of these results revealed a direct relationship between atomic density per area and elastic modulus. Furthermore, for the networks that have an armchair and a zigzag orientation, we observed that they were more stretchable in the zigzag direction than the armchair direction. A critical analysis of the angular distributions and radial distribution functions suggested that it could be due to the higher ability of the networks to suppress the elongations of the bonds in the zigzag direction by deforming the bond angles. The structural interpretations provided in this work not only improve the general understanding of a 2D material's strength but also enables us to rationally design them for higher qualities. △ Less

Submitted 24 March, 2017; originally announced March 2017.

Metamorphosis in Carbon Network: From Penta-Graphene to Biphenylene under Uniaxial Tension

Authors: Obaidur Rahaman, Bohayra Mortazavi, Arezoo Dianat, Gianaurelio Cuniberti, Timon Rabczuk

Abstract: The power of polymorphism in carbon is vividly manifested by the numerous applications of carbon-based nano-materials. Ranging from environmental issues to biomedical applications, it has the potential to address many of today's dire problems. However, an understanding of the mechanism of transformation between carbon allotropes at a microscopic level is crucial for its development into highly des… ▽ More The power of polymorphism in carbon is vividly manifested by the numerous applications of carbon-based nano-materials. Ranging from environmental issues to biomedical applications, it has the potential to address many of today's dire problems. However, an understanding of the mechanism of transformation between carbon allotropes at a microscopic level is crucial for its development into highly desirable materials. In this work we report such a phase transformation between two carbon allotropes, from penta-graphene (a semiconductor) into biphenylene (a metal) under uniaxial loading. Using density functional theory we demonstrated that the phase transformation occurs through a synchronized reorganization of the carbon atoms with a simultaneous drop in energy. The results of this work confirms that penta-graphene is a meta-stable structure. On the other hand, a rigorous analysis of biphenylene suggests that it is an energetically, mechanically, dynamically and thermally stable structure, both in the form of a sheet and a tube. Its electronic structure suggests that it is metallic in both these forms. Therefore, this work unravels the possibility of phase transition in 2-D carbon systems and thereby designing nano-materials capable of altering their properties in an instant. Furthermore, heating biphenylene sheet at a high temperature (5000K) revealed another phase transformation into a more stable hexa-graphene like structure. This proposes thermal annealing as a possible method of synthesizing one 2-D carbon allotrope from another. △ Less

Submitted 24 March, 2017; originally announced March 2017.

Borophene as an anode material for Ca, Mg, Na or Li ion storage: A first-principle study

Authors: B Mortazavi, A Dianat, O Rahaman, G Cuniberti, T Rabczuk

Abstract: Borophene, the boron atom analogue to graphene, being atomic thick have been just recently experimentally fabricated. In this work, we employ first-principles density functional theory calculations to investigate the interaction of Ca, Mg, Na or Li atoms with single-layer and free-standing borophene. We first identified the most stable binding sites and their corresponding binding energies as well… ▽ More Borophene, the boron atom analogue to graphene, being atomic thick have been just recently experimentally fabricated. In this work, we employ first-principles density functional theory calculations to investigate the interaction of Ca, Mg, Na or Li atoms with single-layer and free-standing borophene. We first identified the most stable binding sites and their corresponding binding energies as well and then we gradually increased the ions concentration. Our calculations predict strong binding energies of around 4.03 eV, 2.09 eV, 2.92 eV and 3.28 eV between the borophene substrate and Ca, Mg, Na or Li ions, respectively. We found that the binding energy generally decreases by increasing the ions content. Using the Bader charge analysis, we evaluate the charge transfer between the adatoms and the borophene sheet. Our investigation proposes the borophene as a 2D material with a remarkably high capacity of around 800 mAh/g, 1960 mAh/g, 1380 mAh/g and 1720 mAh/g for Ca, Mg, Na or Li ions storage, respectively. This study can be useful for the possible application of borophene for the rechargeable ion batteries. △ Less

Submitted 17 March, 2017; originally announced March 2017.

Journal ref: Journal of Power Sources 2016, 329, 456-461

Mechanical properties and thermal conductivity of graphitic carbon nitride: A molecular dynamics study

Authors: B Mortazavi, G Cuniberti, T Rabczuk

Abstract: Graphitic carbon nitride nanosheets are among 2D attractive materials due to presenting unusual physicochemical properties.Nevertheless, no adequate information exists about their mechanical and thermal properties. Therefore, we used classical molecular dynamics simulations to explore the thermal conductivity and mechanical response of two main structures of single-layer triazine-basedg-C3N4 films… ▽ More Graphitic carbon nitride nanosheets are among 2D attractive materials due to presenting unusual physicochemical properties.Nevertheless, no adequate information exists about their mechanical and thermal properties. Therefore, we used classical molecular dynamics simulations to explore the thermal conductivity and mechanical response of two main structures of single-layer triazine-basedg-C3N4 films.By performing uniaxial tensile modeling, we found remarkable elastic modulus of 320 and 210 GPa, and tensile strength of 47 GPa and 30 GPa for two different structures of g-C3N4sheets. Using equilibrium molecular dynamics simulations, the thermal conductivity of free-standing g-C3N4 structures were also predicted to be around 7.6 W/mK and 3.5 W/mK. Our study suggests the g-C3N4films as exciting candidate for reinforcement of polymeric materials mechanical properties. △ Less

Submitted 17 March, 2017; originally announced March 2017.

Journal ref: Computational Materials Science 2015, 99, 285-289

Application of silicene, germanene and stanene for Na or Li ion storage: A theoretical investigation

Authors: B Mortazavi, A Dianat, G Cuniberti, T Rabczuk

Abstract: Silicene, germanene and stanene likely to graphene are atomic thick material with interesting properties. We employed first-principles density functional theory (DFT) calculations to investigate and compare the interaction of Na or Li ions on these films. We first identified the most stable binding sites and their corresponding binding energies for a single Na or Li adatom on the considered membra… ▽ More Silicene, germanene and stanene likely to graphene are atomic thick material with interesting properties. We employed first-principles density functional theory (DFT) calculations to investigate and compare the interaction of Na or Li ions on these films. We first identified the most stable binding sites and their corresponding binding energies for a single Na or Li adatom on the considered membranes. Then we gradually increased the ions concentration until the full saturation of the surfaces is achieved. Our Bader charge analysis confirmed complete charge transfer between Li or Na ions with the studied 2D sheets. We then utilized nudged elastic band method to analyze and compare the energy barriers for Li or Na ions diffusions along the surface and through the films thicknesses. Our investigation findings can be useful for the potential application of silicene, germanene and stanene for Na or Li ion batteries. △ Less

Submitted 17 March, 2017; originally announced March 2017.

Journal ref: Electrochimica Acta 2016, 213, 865-870

First-principles investigation of mechanical properties of silicene, germanene and stanene

Authors: B Mortazavi, O Rahaman, M Makaremi, A Dianat, G Cuniberti, T Rabczuk

Abstract: Two dimensional allotropes of group IV substrates including silicene, germanene and stanene have recently attracted considerable attention in nanodevice fabrication industry. These materials involving the buckled structure have been experimentally fabricated lately. In this study, first principles density functional theory calculations were utilized to investigate the mechanical properties of sing… ▽ More Two dimensional allotropes of group IV substrates including silicene, germanene and stanene have recently attracted considerable attention in nanodevice fabrication industry. These materials involving the buckled structure have been experimentally fabricated lately. In this study, first principles density functional theory calculations were utilized to investigate the mechanical properties of single layer and free standing silicene, germanene and stanene. Uniaxial tensile and compressive simulations were carried out to probe and compare stress strain properties; such as the Young modulus, Poisson ratio and ultimate strength. We evaluated the chirality effect on the mechanical response and bond structure of the 2D substrates. Our first principles simulations suggest that in all studied samples application of uniaxial loading can alter the electronic nature of the buckled structures into the metallic character. Our investigation provides a general but also useful viewpoint with respect to the mechanical properties of silicene, germanene and stanene. △ Less

Submitted 17 March, 2017; originally announced March 2017.

Journal ref: Physica E: Low-dimensional Systems and Nanostructures 2017, 87, 228-232

Diameter-Selective Dispersion of Carbon Nanotubes via Polymers: A Competition between Adsorption and Bundling

Authors: Hongliu Yang, Viktor Bezugly, Jens Kunstmann, Arianna Filoramo, Gianaurelio Cuniberti

Abstract: The mechanism of the selective dispersion of single-walled carbon nanotubes (CNTs) by polyfluorene polymers is studied in this paper. Using extensive molecular dynamics simulations, it is demonstrated that diameter selectivity is the result of a competition between bundling of CNTs and adsorption of polymers on CNT surfaces. The preference for certain diameters corresponds to local minima of the b… ▽ More The mechanism of the selective dispersion of single-walled carbon nanotubes (CNTs) by polyfluorene polymers is studied in this paper. Using extensive molecular dynamics simulations, it is demonstrated that diameter selectivity is the result of a competition between bundling of CNTs and adsorption of polymers on CNT surfaces. The preference for certain diameters corresponds to local minima of the binding energy difference between these two processes. Such minima in the diameter dependence occur due to abrupt changes in the CNT's coverage with polymers and their calculated positions are in quantitative agreement with preferred diameters, reported experimentally. The presented approach defines a theoretical framework for the further understanding and improvement of dispersion/extraction processes. △ Less

Submitted 1 September, 2015; originally announced September 2015.

Comments: 22 pages, 5 figures, ACS Nano (2015)

Enhanced thermoelectric figure of merit in polycrystalline carbon nanostructures

Authors: Thomas Lehmann, Dmitry A. Ryndyk, Gianaurelio Cuniberti

Abstract: Grain boundaries are commonly observed in carbon nanostructures, but their influence on thermal and electric properties are still not completely understood. Using a combined approach of density functional tight-binding theory and non-equilibrium Green functions we investigate electron and phonon transport in carbon based systems. In this work, quantum transport and thermoelectric properties are su… ▽ More Grain boundaries are commonly observed in carbon nanostructures, but their influence on thermal and electric properties are still not completely understood. Using a combined approach of density functional tight-binding theory and non-equilibrium Green functions we investigate electron and phonon transport in carbon based systems. In this work, quantum transport and thermoelectric properties are summarized for graphene sheets, graphene nanoribbons and carbon nanotubes with a variety of grain boundary types in a wide temperature range. Motivated by previous findings that disorder scatters phonons more effectively than electrons, a significant improvement in the thermoelectric performance for polycrystalline systems is expected. As the effect is marginally sensitive to the grain boundary type, we demonstrate that grain boundaries are a viable tool to greatly enhance the figure of merit, paving the way for the design of new thermoelectric materials. △ Less

Submitted 29 June, 2015; originally announced June 2015.

Comments: 6 pages, 4 figures

Quantum interference and contact effects in dangling bond loops on H-Si(100) surfaces

Authors: Andrii Kleshchonok, Rafael Gutierrez, Gianaurelio Cuniberti

Abstract: We perform electronic structure and quantum transport studies of dangling bond loops created on H-passivated Si(100) surfaces and connected to carbon nanoribbon leads. We model loops with straight and zigzag topologies as well as with varying lenght with an efficient density-functional based tight-binding electronic structure approach (DFTB) . Varying the length of the loop or the lead coupling po… ▽ More We perform electronic structure and quantum transport studies of dangling bond loops created on H-passivated Si(100) surfaces and connected to carbon nanoribbon leads. We model loops with straight and zigzag topologies as well as with varying lenght with an efficient density-functional based tight-binding electronic structure approach (DFTB) . Varying the length of the loop or the lead coupling position we induce the drastic change in the transmission due to the electron interference. Depending if the constructive or destructive interference within the loop takes place we can noticeably change transport properties by few orders of magnitude. These results propose a way to engineer the closed electronically driven nanocircuits with high transport properties and exploit the interference effects in order to control them. △ Less

Submitted 23 June, 2015; originally announced June 2015.

Contact effects in spin transport along double-helical molecules

Authors: Ai-Min Guo, E. Díaz, C. Gaul, R. Gutierrez, F. Domínguez-Adame, G. Cuniberti, Qing-feng Sun

Abstract: We report on spin transport along double-helical molecular systems by considering various contact configurations and asymmetries between the two helical strands in the regime of completely coherent charge transport. Our results reveal that no spin polarization appears in two-terminal molecular devices when coupled to one-dimensional electrodes. The same holds in the case of finite-width electrodes… ▽ More We report on spin transport along double-helical molecular systems by considering various contact configurations and asymmetries between the two helical strands in the regime of completely coherent charge transport. Our results reveal that no spin polarization appears in two-terminal molecular devices when coupled to one-dimensional electrodes. The same holds in the case of finite-width electrodes if there is a \emph{bottleneck} of one single site in the system electrode--molecule--electrode. Then, additional dephasing is necessary to induce spin-filtering effects. In contrast, nonzero spin polarization is found in molecular devices with multiple terminals or with two finite-width electrodes, each of them connected to more than one site of the molecule. Then, the magnitude of spin polarization can be enhanced by increasing the asymmetry between the two strands. We point out that the spin-filtering effects could emerge in double-helical molecular devices at low temperature without dephasing by a proper choice of the electrode number and the connection between the molecule and the electrodes. △ Less

Submitted 18 May, 2014; originally announced May 2014.

Comments: 7 pages, 5 figures

Journal ref: Phys. Rev. B 89, 205434 (2014)

Unveiling the atomic structure of single-wall boron nanotubes

Authors: Jens Kunstmann, Viktor Bezugly, Hauke Rabbel, Mark H. Rümmeli, Gianaurelio Cuniberti

Abstract: Despite recent successes in the synthesis of boron nanotubes (BNTs), the atomic arrangement of their walls has not yet been determined and many questions about their basic properties do remain. Here, we unveil the dynamical stability of BNTs by means of first-principles molecular dynamics simulations. We find that free-standing, single-wall BNTs with diameters larger than 0.6 nm are thermally stab… ▽ More Despite recent successes in the synthesis of boron nanotubes (BNTs), the atomic arrangement of their walls has not yet been determined and many questions about their basic properties do remain. Here, we unveil the dynamical stability of BNTs by means of first-principles molecular dynamics simulations. We find that free-standing, single-wall BNTs with diameters larger than 0.6 nm are thermally stable at the experimentally reported synthesis temperature of 870$^\circ$C and higher. The walls of thermally stable BNTs are found to have a variety of different mixed triangular-hexagonal morphologies. Our results substantiate the importance of mixed triangular-hexagonal morphologies as a structural paradigm for atomically thin boron. △ Less

Submitted 17 April, 2014; originally announced April 2014.

Comments: 13 pages, 5 figures. Advanced Functional Materials (2014)

Combined effect of strain and defects on the conductance of graphene nanoribbons

Authors: Thomas Lehmann, Dmitry A. Ryndyk, Gianaurelio Cuniberti

Abstract: We investigate the combined influence of structural defects and uniaxial longitudinal strain on the electronic transport properties of armchair graphene nanoribbons using the numerical approach based on the semiempirical tight-binding model, the Landauer formalism, and the recursion method for Green functions. We calculate the conductance of graphene nanoribbons in the quantum coherent regime with… ▽ More We investigate the combined influence of structural defects and uniaxial longitudinal strain on the electronic transport properties of armchair graphene nanoribbons using the numerical approach based on the semiempirical tight-binding model, the Landauer formalism, and the recursion method for Green functions. We calculate the conductance of graphene nanoribbons in the quantum coherent regime with different types and concentrations of defects. Further, we apply uniform planar tension to the nonideal graphene ribbons with randomly distributed and oriented single and double vacancies and Stone-Wales defects. Since transport characteristics of graphene nanoribbons are found to be very sensitive to edge termination and aspect ratio, and it has been shown that energy gaps can emerge under critical strain; the interplay of both effects needs to be studied. We show that band gap engineering using strain is still possible for nonideal armchair ribbons with a small defect concentration, as the oscillatory behavior of the gap is preserved. △ Less

Submitted 27 September, 2013; originally announced September 2013.

Journal ref: Phys. Rev. B 88, 125420 (2013)

Disorder and dephasing effect on electron transport through conjugated molecular wires in molecular junctions

Authors: Daijiro Nozaki, Claudia Gomes da Rocha, Horacio M. Pastawski, Gianaurelio Cuniberti

Abstract: Understanding electron transport processes in molecular wires connected between contacts is a central focus in the field of molecular electronics. Especially, the dephasing effect causing tunneling-to-hopping transition has great importance from both applicational and fundamental points of view. We analyzed coherent and incoherent electron transmission through conjugated molecular wires by means o… ▽ More Understanding electron transport processes in molecular wires connected between contacts is a central focus in the field of molecular electronics. Especially, the dephasing effect causing tunneling-to-hopping transition has great importance from both applicational and fundamental points of view. We analyzed coherent and incoherent electron transmission through conjugated molecular wires by means of density-functional tight-binding theory within the D'Amato-Pastawski model. Our approach can study explicitly the structure/transport relationship in molecular junctions in a dephasing environmental condition using only single dephasing parameter. We investigated the length dependence and the influence of thermal fluctuations on transport and reproduced the well-known tunneling-to-hopping transition. This approach will be a powerful tool for the interpretation of recent conductance measurements of molecular wires. △ Less

Submitted 31 March, 2012; originally announced April 2012.

Comments: 6 pages, 7 figures, accepted for publication in Phys. Rev. B

Journal ref: Phys. Rev. B 85, 155327 (2012)

Control of quantum interference in molecular junctions: Understanding the origin of Fano and anti- resonances

Authors: Daijiro Nozaki, Haldun Sevincli, Stanislav M. Avdoshenko, Rafael Gutierrez, Gianaurelio Cuniberti

Abstract: We investigate within a coarse-grained model the conditions leading to the appearance of Fano resonances or anti-resonances in the conductance spectrum of a generic molecular junction with a side group (T-junction). By introducing a simple graphical representation (parabolic diagram), we can easily visualize the relation between the different electronic parameters determining the regimes where Fan… ▽ More We investigate within a coarse-grained model the conditions leading to the appearance of Fano resonances or anti-resonances in the conductance spectrum of a generic molecular junction with a side group (T-junction). By introducing a simple graphical representation (parabolic diagram), we can easily visualize the relation between the different electronic parameters determining the regimes where Fano resonances or anti-resonances in the low-energy conductance spectrum can be expected. The results obtained within the coarse-grained model are validated using density-functional based quantum transport calculations in realistic T-shaped molecular junctions. △ Less

Submitted 17 July, 2013; v1 submitted 23 March, 2012; originally announced March 2012.

Comments: 5 pages, 5 figures