-
Crystallographic control of hydrogen ingress in bcc-Iron: Insights from ab initio simulations
Authors:
Lukas Meier,
Asif I. Bhatti,
Leo Kestens,
Stefaan Cottenier
Abstract:
Hydrogen uptake into body-centered cubic (bcc) iron as a root cause for subsequent hydrogen embrittlement, is initiated at the surface. In this paper, we quantify how readily H diffuses from the surface into the bulk. We consider a set of low-index, vicinal and general Fe surfaces and treat H-permeation as a two-step process. First, density-functional calculations determine the adsorption energy o…
▽ More
Hydrogen uptake into body-centered cubic (bcc) iron as a root cause for subsequent hydrogen embrittlement, is initiated at the surface. In this paper, we quantify how readily H diffuses from the surface into the bulk. We consider a set of low-index, vicinal and general Fe surfaces and treat H-permeation as a two-step process. First, density-functional calculations determine the adsorption energy of an isolated H atom at every crystallographically distinct surface site. Second, for each adsorption site we map the minimum-energy pathway that carries the atom beneath the surface and into the lattice. Across all ten orientations studied, a clear trend emerges: sites that bind hydrogen most weakly (highest adsorption energy) are the starting point of the lowest-barrier diffusion channels into the metal interior. Thus, the least-favorable adsorption pockets act as gateways for efficient subsurface penetration. These insights provide a practical design rule: suppressing or minimizing exposure of such high-energy adsorption motifs - through appropriate surface texturing or orientation control - should make bcc-iron components less susceptible to hydrogen uptake and the associated embrittlement.
△ Less
Submitted 26 May, 2025;
originally announced May 2025.
-
How to verify the precision of density-functional-theory implementations via reproducible and universal workflows
Authors:
Emanuele Bosoni,
Louis Beal,
Marnik Bercx,
Peter Blaha,
Stefan Blügel,
Jens Bröder,
Martin Callsen,
Stefaan Cottenier,
Augustin Degomme,
Vladimir Dikan,
Kristjan Eimre,
Espen Flage-Larsen,
Marco Fornari,
Alberto Garcia,
Luigi Genovese,
Matteo Giantomassi,
Sebastiaan P. Huber,
Henning Janssen,
Georg Kastlunger,
Matthias Krack,
Georg Kresse,
Thomas D. Kühne,
Kurt Lejaeghere,
Georg K. H. Madsen,
Martijn Marsman
, et al. (20 additional authors not shown)
Abstract:
In the past decades many density-functional theory methods and codes adopting periodic boundary conditions have been developed and are now extensively used in condensed matter physics and materials science research. Only in 2016, however, their precision (i.e., to which extent properties computed with different codes agree among each other) was systematically assessed on elemental crystals: a firs…
▽ More
In the past decades many density-functional theory methods and codes adopting periodic boundary conditions have been developed and are now extensively used in condensed matter physics and materials science research. Only in 2016, however, their precision (i.e., to which extent properties computed with different codes agree among each other) was systematically assessed on elemental crystals: a first crucial step to evaluate the reliability of such computations. We discuss here general recommendations for verification studies aiming at further testing precision and transferability of density-functional-theory computational approaches and codes. We illustrate such recommendations using a greatly expanded protocol covering the whole periodic table from Z=1 to 96 and characterizing 10 prototypical cubic compounds for each element: 4 unaries and 6 oxides, spanning a wide range of coordination numbers and oxidation states. The primary outcome is a reference dataset of 960 equations of state cross-checked between two all-electron codes, then used to verify and improve nine pseudopotential-based approaches. Such effort is facilitated by deploying AiiDA common workflows that perform automatic input parameter selection, provide identical input/output interfaces across codes, and ensure full reproducibility. Finally, we discuss the extent to which the current results for total energies can be reused for different goals (e.g., obtaining formation energies).
△ Less
Submitted 26 May, 2023;
originally announced May 2023.
-
The road to accuracy: machine-learning-accelerated silicon ab initio simulations
Authors:
Michael Sluydts,
Michiel Larmuseau,
Johan Lauwaert,
Stefaan Cottenier
Abstract:
Ab initio simulations are capable of providing detailed information of material behavior at the nanoscale. Simulating experimentally relevant situations is, however, often computationally intense. Using hybrid approaches between ab initio methods such as density functional theory (DFT) and machine learning, new models can be constructed which retain quantum accuracy while being computationally fas…
▽ More
Ab initio simulations are capable of providing detailed information of material behavior at the nanoscale. Simulating experimentally relevant situations is, however, often computationally intense. Using hybrid approaches between ab initio methods such as density functional theory (DFT) and machine learning, new models can be constructed which retain quantum accuracy while being computationally faster by several orders of magnitude. Two examples are discussed in this paper. The first is the computational search for low energy substitutional defect complexes in silicon. The second is the construction of deep learning potentials for ab initio-level molecular dynamics simulations. The latter is applied to reproduce the 0 K equation of state and high temperature thermal expansion of Si using the same model.
△ Less
Submitted 25 March, 2019;
originally announced March 2019.
-
Aliovalent Doping of CeO$_2$: DFT-study of Oxidation State and Vacancy Effects
Authors:
Danny E. P. Vanpoucke,
Patrick Bultinck,
Stefaan Cottenier,
Veronique Van Speybroeck,
Isabel Van Driessche
Abstract:
The modification of the properties of CeO$_2$ through aliovalent doping are investigated within the \emph{ab-initio} density functional theory framework. Lattice parameters, dopant atomic radii, bulk moduli and thermal expansion coefficients of fluorite type Ce$_{1-x}$M$_{x}$O$_{2-y}$ (with M$ = $ Mg, V, Co, Cu, Zn, Nb, Ba, La, Sm, Gd, Yb, and Bi)are presented for dopant concentrations in the rang…
▽ More
The modification of the properties of CeO$_2$ through aliovalent doping are investigated within the \emph{ab-initio} density functional theory framework. Lattice parameters, dopant atomic radii, bulk moduli and thermal expansion coefficients of fluorite type Ce$_{1-x}$M$_{x}$O$_{2-y}$ (with M$ = $ Mg, V, Co, Cu, Zn, Nb, Ba, La, Sm, Gd, Yb, and Bi)are presented for dopant concentrations in the range $0.00 \leq x \leq 0.25$. The stability of the dopants is compared and discussed, and the influence of oxygen vacancies is investigated. It is shown that oxygen vacancies tend to increase the lattice parameter, and strongly decrease the bulk modulus. Defect formation energies are correlated with calculated crystal radii and covalent radii of the dopants, but are shown to present no simple trend. The previously observed inverse relation between the thermal expansion coefficient and the bulk modulus is shown to persist independent of the inclusion of charge compensating vacancies.
△ Less
Submitted 14 November, 2013;
originally announced November 2013.
-
Tetravalent doping of CeO$_2$: The impact of valence electron character on group IV dopant influence
Authors:
D. E. P. Vanpoucke,
S. Cottenier,
V. Van Speybroeck,
I. Van Driessche,
P. Bultinck
Abstract:
Fluorite CeO$_2$ doped with group IV elements is studied within the DFT and DFT+U framework. Concentration dependent formation energies are calculated for Ce$_{1-x}$Z$_x$O$_2$ (Z= C, Si, Ge, Sn, Pb, Ti, Zr, Hf) with $0\leq x \leq 0.25$ and a roughly decreasing trend with ionic radius is observed. The influence of the valence and near valence electronic configuration is discussed, indicating the im…
▽ More
Fluorite CeO$_2$ doped with group IV elements is studied within the DFT and DFT+U framework. Concentration dependent formation energies are calculated for Ce$_{1-x}$Z$_x$O$_2$ (Z= C, Si, Ge, Sn, Pb, Ti, Zr, Hf) with $0\leq x \leq 0.25$ and a roughly decreasing trend with ionic radius is observed. The influence of the valence and near valence electronic configuration is discussed, indicating the importance of filled $d$ and $f$ shells near the Fermi level for all properties investigated. A clearly different behavior of group IVa and IVb dopants is observed: the former are more suitable for surface modifications, the latter are more suitable for bulk modifications.\\ \indent For the entire set of group IV dopants, there exists an inverse relation between the change, due to doping, of the bulk modulus and the thermal expansion coefficients. Hirshfeld-I atomic charges show that charge transfer effects due to doping are limited to the nearest neighbor oxygen atoms.
△ Less
Submitted 14 November, 2013;
originally announced November 2013.
-
Tuning of CeO$_2$ buffer layers for coated superconductors through doping
Authors:
Danny E. P. Vanpoucke,
Stefaan Cottenier,
Veronique Van Speybroeck,
Patrick Bultinck,
Isabel Van Driessche
Abstract:
The appearance of microcracks in CeO$_2$ buffer layers, as used in buffer layer architectures for coated superconductors, indicates the presence of stress between this buffer layer and the substrate. This stress can originate from the differences in thermal expansion or differences in lattice parameters between the CeO$_2$ buffer layer and the substrate. In this article, we study, by means of \tex…
▽ More
The appearance of microcracks in CeO$_2$ buffer layers, as used in buffer layer architectures for coated superconductors, indicates the presence of stress between this buffer layer and the substrate. This stress can originate from the differences in thermal expansion or differences in lattice parameters between the CeO$_2$ buffer layer and the substrate. In this article, we study, by means of \textit{ab initio} density functional theory calculations, the influence of group IV doping elements on the lattice parameter and bulk modulus of CeO$_2$. Vegard's law behavior is found for the lattice parameter in systems without oxygen vacancies, and the Shannon crystal radii for the doping elements are retrieved from the lattice expansions. We show that the lattice parameter of the doped CeO$_2$ can be matched to that of the La$_2$Zr$_2$O$_7$ coated NiW substrate substrate for dopant concentrations of about $5\%$, and that bulk modulus matching is either not possible or would require extreme doping concentrations.
△ Less
Submitted 14 November, 2013;
originally announced November 2013.
-
DFT study of La$_2$Ce$_2$O$_7$: disordered fluorite vs pyrochlore structure
Authors:
D. E. P. Vanpoucke,
P. Bultinck,
S. Cottenier,
V. Van Speybroeck,
I. Van Driessche
Abstract:
The crystal structure of Lanthanum Cerium Oxide (La$_2$Ce$_2$O$_7$) is investigated using \textit{ab initio} density functional theory (DFT) calculations. The relative stability of fluorite- and pyrochlore-like structures is studied through comparison of their formation energies. These formation energies show the pyrochlore structure to be favored over the fluorite structure, apparently contradict…
▽ More
The crystal structure of Lanthanum Cerium Oxide (La$_2$Ce$_2$O$_7$) is investigated using \textit{ab initio} density functional theory (DFT) calculations. The relative stability of fluorite- and pyrochlore-like structures is studied through comparison of their formation energies. These formation energies show the pyrochlore structure to be favored over the fluorite structure, apparently contradicting the conclusions based on experimental neutron and X-ray diffraction (XRD). By calculating and comparing XRD spectra for a set of differently ordered and random structures, we show that the pyrochlore structure is consistent with diffraction experiments. For these reasons, we suggest the pyrochlore structure as the ground state crystal structure for La$_2$Ce$_2$O$_7$. %we show that among the structures considered in this work, the pyrochlore geometry is clearly favorable over the disordered fluorite geometry.
△ Less
Submitted 14 November, 2013;
originally announced November 2013.
-
Error estimates for solid-state density-functional theory predictions: an overview by means of the ground-state elemental crystals
Authors:
Kurt Lejaeghere,
Veronique Van Speybroeck,
Guido Van Oost,
Stefaan Cottenier
Abstract:
Predictions of observable properties by density-functional theory calculations (DFT) are used increasingly often in experimental condensed-matter physics and materials engineering as data. These predictions are used to analyze recent measurements, or to plan future experiments. Increasingly more experimental scientists in these fields therefore face the natural question: what is the expected error…
▽ More
Predictions of observable properties by density-functional theory calculations (DFT) are used increasingly often in experimental condensed-matter physics and materials engineering as data. These predictions are used to analyze recent measurements, or to plan future experiments. Increasingly more experimental scientists in these fields therefore face the natural question: what is the expected error for such an ab initio prediction? Information and experience about this question is scattered over two decades of literature. The present review aims to summarize and quantify this implicit knowledge. This leads to a practical protocol that allows any scientist - experimental or theoretical - to determine justifiable error estimates for many basic property predictions, without having to perform additional DFT calculations. A central role is played by a large and diverse test set of crystalline solids, containing all ground-state elemental crystals (except most lanthanides). For several properties of each crystal, the difference between DFT results and experimental values is assessed. We discuss trends in these deviations and review explanations suggested in the literature. A prerequisite for such an error analysis is that different implementations of the same first-principles formalism provide the same predictions. Therefore, the reproducibility of predictions across several mainstream methods and codes is discussed too. A quality factor Delta expresses the spread in predictions from two distinct DFT implementations by a single number. To compare the PAW method to the highly accurate APW+lo approach, a code assessment of VASP and GPAW with respect to WIEN2k yields Delta values of 1.9 and 3.3 meV/atom, respectively. These differences are an order of magnitude smaller than the typical difference with experiment, and therefore predictions by APW+lo and PAW are for practical purposes identical.
△ Less
Submitted 5 August, 2013; v1 submitted 12 April, 2012;
originally announced April 2012.
-
Thermodynamic consistency and fast dynamics in phase field crystal modeling
Authors:
Mowei Cheng,
Stefaan Cottenier,
Heike Emmerich
Abstract:
A general formulation is presented to derive the equation of motion and to demonstrate thermodynamic consistency for several classes of phase field models at once. It applies to models with a conserved phase field, describing either uniform or periodic stable states, and containing slow as well as fast thermodynamic variables. The approach is based on an entropy functional formalism previously d…
▽ More
A general formulation is presented to derive the equation of motion and to demonstrate thermodynamic consistency for several classes of phase field models at once. It applies to models with a conserved phase field, describing either uniform or periodic stable states, and containing slow as well as fast thermodynamic variables. The approach is based on an entropy functional formalism previously developed in the context of phase field models for uniform states [P. Galenko and D. Jou, Phys. Rev. E {\bf 71}, 046125 (2005)] and thus allows to extend several properties of the latter to phase field models for periodic states (phase field crystal models). In particular, it allows to demonstrate the concept of thermodynamic consistency for phase field crystal models with fast dynamics.
△ Less
Submitted 5 May, 2011; v1 submitted 22 July, 2008;
originally announced July 2008.
-
Dynamic Lattice Distortions in Sr$_2$RuO$_4$: A microscopic study by perturbed angular correlation (TDPAC) spectroscopy
Authors:
S. N. Mishra,
M. Rots,
S. Cottenier
Abstract:
Applying time differential perturbed angular correlation (TDPAC) spectroscopy and \emph{ab initio} calculations, we have investigated possible lattice instabilities in Sr$_{2}$RuO$_{4}$ by studying the electric quadrupole interaction of a $^{111}$Cd probe at the Ru site. We find evidence for a dynamic lattice distortion, revealed from the observations of: (i) a rapidly fluctuating electric-field…
▽ More
Applying time differential perturbed angular correlation (TDPAC) spectroscopy and \emph{ab initio} calculations, we have investigated possible lattice instabilities in Sr$_{2}$RuO$_{4}$ by studying the electric quadrupole interaction of a $^{111}$Cd probe at the Ru site. We find evidence for a dynamic lattice distortion, revealed from the observations of: (i) a rapidly fluctuating electric-field gradient (EFG) tensor of which the main component decreases with decreasing temperature, and (ii) a monotonic increase of the EFG asymmetry ($η$) below 300 K. We argue that the observed dynamic lattice distortion is caused by strong spin fluctuations associated with the inherent magnetic instability of Sr$_{2}$RuO$_{4}$.
△ Less
Submitted 4 January, 2007;
originally announced January 2007.
-
Hyperfine interactions at lanthanide impurities in Fe
Authors:
Doru Torumba,
Stefaan Cottenier,
Veerle Vanhoof,
Michel Rots
Abstract:
The magnetic hyperfine field and electric-field gradient at isolated lanthanide impurities in an Fe host lattice are calculated from first principles, allowing for the first time a qualitative and quantitative understanding of an experimental data set collected over the past 40 years. It is demonstrated that the common Local Density Approximation leads to quantitatively and qualitatively wrong r…
▽ More
The magnetic hyperfine field and electric-field gradient at isolated lanthanide impurities in an Fe host lattice are calculated from first principles, allowing for the first time a qualitative and quantitative understanding of an experimental data set collected over the past 40 years. It is demonstrated that the common Local Density Approximation leads to quantitatively and qualitatively wrong results, while the LDA+U method performs much better. In order to avoid pitfalls inherent to the LDA+U method, a careful strategy had to be used, which will be described in detail. The lanthanide 4f spin moment is found to couple antiferromagnetically to the magnetization of the Fe lattice, in agreement with the model of Campbell and Brooks. There is strong evidence for a delocalization/localization transition that is shifted from Ce to at least Pr and maybe further up to Sm. This shift is interpreted in terms of the effective pressure felt by lanthanides in Fe. Implications for resolving ambiguities in the determination of delocalization in pure lanthanide metals under pressure are discussed. For the localized lanthanides, Yb is shown to be divalent in this host lattice, while all others are trivalent (including Eu, the case of Tm is undecided). The completely filled and well-bound 5p shell of the lanthanides is shown to have a major and unexpected influence on the dipolar hyperfine field and on the electric-field gradient, a feature that can be explained by their 1/r^3 dependence. An extrapolation to actinides suggests that the same is true for the actinide 6p shell. The case of free lanthanide atoms is discussed as well.
△ Less
Submitted 4 January, 2005;
originally announced January 2005.
-
The coordination dependence of electric-field gradients and hyperfine fields at 5sp impurities on fcc metal surfaces
Authors:
S. Cottenier,
V. Bellini,
M. Cakmak,
F. Manghi,
M. Rots
Abstract:
We present a comparison between accurate \textit{ab initio} calculations and a high-quality experimental data set (1986-2002) of electric-field gradients and magnetic hyperfine fields of Cd at different sites on Ni, Cu, Pd and Ag surfaces. Experiments found a systematic rule to assign surface sites on (100) and (111) surfaces based on the main component of the electric-field gradient, a rule tha…
▽ More
We present a comparison between accurate \textit{ab initio} calculations and a high-quality experimental data set (1986-2002) of electric-field gradients and magnetic hyperfine fields of Cd at different sites on Ni, Cu, Pd and Ag surfaces. Experiments found a systematic rule to assign surface sites on (100) and (111) surfaces based on the main component of the electric-field gradient, a rule that does not work for (110) surfaces. Our calculations show that this particular rule is a manifestation of a more general underlying systematic behavior. When looked upon from this point of view, (100), (111) \emph{and} (110) surfaces behave in precisely the same way. The experimentally observed parabolic coordination number dependence of the Cd magnetic hyperfine field at Ni surfaces is verified as a general trend, but we demonstrate that individual cases can significantly deviate from it. It is shown that the hyperfine fields of other 5sp impurities at Ni surfaces have their own, typical coordination number dependence. A microscopic explanation for the different dependencies is given in terms of the details of the s-DOS near the Fermi level.
△ Less
Submitted 12 December, 2003;
originally announced December 2003.
-
Valency of rare earths in RIn3 and RSn3: Ab initio analysis of electric-field gradients
Authors:
S. Jalali Asadabadi,
S. Cottenier,
H. Akbarzadeh,
R. Saki,
M. Rots
Abstract:
In RIn3 and RSn3 the rare earth (R) is trivalent, except for Eu and Yb, which are divalent. This was experimentally determined in 1977 by perturbed angular correlation measurements of the electric-field gradient on a 111Cd impurity. At that time, the data were interpreted using a point charge model, which is now known to be unphysical and unreliable. This makes the valency determination potentia…
▽ More
In RIn3 and RSn3 the rare earth (R) is trivalent, except for Eu and Yb, which are divalent. This was experimentally determined in 1977 by perturbed angular correlation measurements of the electric-field gradient on a 111Cd impurity. At that time, the data were interpreted using a point charge model, which is now known to be unphysical and unreliable. This makes the valency determination potentially questionable. We revisit these data, and analyze them using ab initio calculations of the electric-field gradient. From these calculations, the physical mechanism that is responsible for the influence of the valency on the electric-field gradient is derived. A generally applicable scheme to interpret electric-field gradients is used, which in a transparent way correlates the size of the field gradient with chemical properties of the system.
△ Less
Submitted 4 December, 2002; v1 submitted 1 December, 2002;
originally announced December 2002.
-
Local magnetism of isolated Mo atoms at substitutional and interstitial sites in Yb metal : Experiment and Theory
Authors:
A. A. Tulapurkar,
S. N. Mishra,
R. G. Pillay,
H. G. Salunke,
G. P. Das,
S. Cottenier
Abstract:
Using TDPAD experiment and local spin density calculations, we have observed large 4d moments on isolated Mo atoms at substitutional and octahedral interstitial lattice sites in Yb metal, showing Curie-Weiss local susceptibility and Korringa like spin relaxation rate. As a surprising feature, despite strong hybridization with the Yb neighbours, interstitial Mo atoms show high moment stability wi…
▽ More
Using TDPAD experiment and local spin density calculations, we have observed large 4d moments on isolated Mo atoms at substitutional and octahedral interstitial lattice sites in Yb metal, showing Curie-Weiss local susceptibility and Korringa like spin relaxation rate. As a surprising feature, despite strong hybridization with the Yb neighbours, interstitial Mo atoms show high moment stability with small Kondo temperature. While, magnetism of Mo, at substitutional site is consistent with Kondo type antiferromagnetic d-sp exchange interaction, we suggest that moment stability at the interstitial site is strongly influenced by ferromagnetic polarization of Yb-4f5d band electrons.
△ Less
Submitted 4 May, 2000;
originally announced May 2000.
