Showing 1–50 of 95 results for author: Cole, J H

Tuning of Josephson junctions -- the effects of depinning physics

Authors: Oscar W. Kennedy, Jared H. Cole, Connor D. Shelly

Abstract: Building more powerful quantum computers requires manufacturing processes with tight tolerances. To improve the tolerances on Josephson junctions, techniques to fine tune their properties after fabrication have been developed. Understanding how tuning techniques may physically modify the tunnel barrier of a Josephson junction is important and will enable these techniques to be optimised. We develo… ▽ More Building more powerful quantum computers requires manufacturing processes with tight tolerances. To improve the tolerances on Josephson junctions, techniques to fine tune their properties after fabrication have been developed. Understanding how tuning techniques may physically modify the tunnel barrier of a Josephson junction is important and will enable these techniques to be optimised. We develop a model of junction tuning based on depinning theory to interpret a phase diagram of tuning rate. We extract the dependence on temperature, time varying voltages and oscillation frequency. Using depinning theory we are able to show both why time varying annealing potentials result in controlled junction tuning and how such protocols can be optimised. We examine how tuning changes the electrical breakdown of barriers and discrepancies between modeled and measured higher energy levels of transmon qubits. △ Less

Submitted 25 February, 2025; originally announced February 2025.

Comments: 5 pages 3 figures

The $N_2V$ color center: a ubiquitous visible and near-infrared-II quantum emitter in nitrogen-doped diamond

Authors: Brett C. Johnson, Mitchell O. de Vries, Alexander J. Healey, Marco Capelli, Anjay Manian, Giannis Thalassinos, Amanda N. Abraham, Harini Hapuarachchi, Tingpeng Luo, Vadym Mochalin, Jan Jeske, Jared H. Cole, Salvy Russo, Brant C. Gibson, Alastair Stacey, Philipp Reineck

Abstract: Photoluminescent defects in diamond, like the nitrogen-vacancy (NV) color center, are at the forefront of emerging optical quantum technologies. Most emit in the visible and near-infrared spectral region below 1000 nm (NIR-I), limiting their applications in photonics, fiber communications, and biology. Here, we show that the nitrogen-vacancy-nitrogen ($N_2V$) center, which emits in the visible and… ▽ More Photoluminescent defects in diamond, like the nitrogen-vacancy (NV) color center, are at the forefront of emerging optical quantum technologies. Most emit in the visible and near-infrared spectral region below 1000 nm (NIR-I), limiting their applications in photonics, fiber communications, and biology. Here, we show that the nitrogen-vacancy-nitrogen ($N_2V$) center, which emits in the visible and near-infrared-II (NIR-II, 1000-1700 nm), is ubiquitous in as-synthesized and processed nitrogen-doped diamond from bulk samples to nanoparticles. We demonstrate that $N_2V$ is also present in commercially available state-of-the-art NV diamond sensing chips made via chemical vapor deposition (CVD). In high-pressure high-temperature (HPHT) diamonds, the photoluminescence (PL) intensity of both $N_2V$ charge states, $N_2V^0$ in the visible and $N_2V^-$ in the NIR-II, increases with increasing substitutional nitrogen concentration. We determine the PL lifetime of $N_2V^-$ to be 0.3 ns and compare a quantum optical and density functional theory model of the $N_2V^-$ with experimental PL spectra. Finally, we show that detonation nanodiamonds (DND) show stable PL in the NIR-II, which we attribute to the $N_2V$ color center, and use this NIR-II PL to image DNDs inside skin cells. Our results will contribute to the scientific and technological exploration and development of the $N_2V$ color center and inspire more research into its effect on other color centers in diamond. △ Less

Submitted 18 December, 2024; v1 submitted 15 December, 2024; originally announced December 2024.

Quantum emitter in a plasmonic field: an orientation generalised model

Authors: Harini Hapuarachchi, Jesse A. Vaitkus, Jared H. Cole

Abstract: When a quantum emitter (QE) is placed in close proximity to a plasmonic metal nanoparticle (MNP) within an external optical field, a dipole-dipole coupling arises, resulting in a highly tunable hybrid nanosystem that surpasses the optical manipulation capabilities of the individual components. These hybrid systems enable the exploration and manipulation of optical fields at the intersection betwee… ▽ More When a quantum emitter (QE) is placed in close proximity to a plasmonic metal nanoparticle (MNP) within an external optical field, a dipole-dipole coupling arises, resulting in a highly tunable hybrid nanosystem that surpasses the optical manipulation capabilities of the individual components. These hybrid systems enable the exploration and manipulation of optical fields at the intersection between classical and quantum phenomena. Theoretical models of this interaction have typically been limited to the extreme orientations, where the QE and plasmonic dipoles are polarised either along or perpendicular to the inter-particle axis, for analytical tractability. In this work, we generalise the semi-classical optical dipole-dipole interaction model for a two-level quantum emitter in a plasmonic field for arbitrary polarisation angles. We show that the total field experienced by the quantum emitter at intermediate angles does not necessarily align with the external input field and discuss the implications of varying the polarisation angle of the external input field. △ Less

Submitted 9 December, 2024; originally announced December 2024.

Comments: Comprises 9 pages and 4 figures. The code for result generation can be found at https://github.com/Harini-P-H/MNP-QE/

Transverse magnetic focusing in two-dimensional hole gases

Authors: Yik K. Lee, Jackson S. Smith, Hong Liu, Dimitrie Culcer, Oleg P. Sushkov, Alexander R. Hamilton, Jared H. Cole

Abstract: Two-dimensional hole gases (2DHGs) have strong intrinsic spin-orbit coupling and could be used to build spin filters by utilising transverse magnetic focusing (TMF). However, with an increase in the spin degree of freedom, holes demonstrate significantly different behaviour to electrons in TMF experiments, making it difficult to interpret the results of these experiments. In this paper, we numeric… ▽ More Two-dimensional hole gases (2DHGs) have strong intrinsic spin-orbit coupling and could be used to build spin filters by utilising transverse magnetic focusing (TMF). However, with an increase in the spin degree of freedom, holes demonstrate significantly different behaviour to electrons in TMF experiments, making it difficult to interpret the results of these experiments. In this paper, we numerically model TMF in a 2DHG within a GaAs/Al$_{\mathrm{x}}$Ga$_{\mathrm{1-x}}$As heterostructure. Our band structure calculations show that the heavy $(\langle J_{z} \rangle = \pm\frac{3}{2})$ and light $(\langle J_{z} \rangle = \pm\frac{1}{2})$ hole states in the valence band mix at finite $k$, and the heavy hole subbands which are spin-split due to the Rashba effect are not spin-polarised. This lack of spin polarisation casts doubt on the viability of spin filtering using TMF in 2DHGs within conventional GaAs/Al$_{\mathrm{x}}$Ga$_{\mathrm{1-x}}$As heterostructures. We then calculate transport properties of the 2DHG with spin projection and offer a new perspective on interpreting and designing TMF experiments in 2DHGs. △ Less

Submitted 2 December, 2024; originally announced December 2024.

Modal decomposition of localized plasmon on gold nanoparticles

Authors: Gangcheng Yuan, Jared H. Cole, Alison M. Funston

Abstract: Localized surface plasmons (LSPs) are collective oscillations of free electrons in metal nanoparticles that confine electromagnetic waves into subwavelength regions, making them an ideal platform for light-matter coupling. To design and understand plasmonic structures, numerical computations of Maxwell's equations are commonly used. However, obtaining physical insight from these numerical solution… ▽ More Localized surface plasmons (LSPs) are collective oscillations of free electrons in metal nanoparticles that confine electromagnetic waves into subwavelength regions, making them an ideal platform for light-matter coupling. To design and understand plasmonic structures, numerical computations of Maxwell's equations are commonly used. However, obtaining physical insight from these numerical solutions can be challenging, especially for complex-shaped nanoparticles. To circumvent this, we introduce mode decomposition strategies within the boundary element method (BEM). By employing singular value decomposition (SVD) and quasi-normal mode (QNM) decomposition, we break down optical responses into elementary modes. QNMs offer deeper insights into frequency and damping, while SVD modes allow for more accurate spectral reconstruction with fast computation. These techniques provide a deeper understanding of LSPs and facilitates the design of metal nanoparticles for efficient light-matter interaction. △ Less

Submitted 21 October, 2024; originally announced October 2024.

Electronic Structure at the Perovskite Rubrene Interface: The Effect of Surface Termination

Authors: Nicholas P. Sloane, Christopher G. Bailey, Jared H. Cole, Timothy W. Schmidt, Dane R. McCamey, Mykhailo V. Klymenko

Abstract: Perovskite films have rapidly emerged as leading active materials in optoelectronic devices due to their strong optical absorption, high carrier mobility and ease of fabrication. Whilst proving to be promising materials for solar cells and light-emitting diodes, another application of perovskites which makes effective use of their unique properties is sensitisation for photon upconversion. Consist… ▽ More Perovskite films have rapidly emerged as leading active materials in optoelectronic devices due to their strong optical absorption, high carrier mobility and ease of fabrication. Whilst proving to be promising materials for solar cells and light-emitting diodes, another application of perovskites which makes effective use of their unique properties is sensitisation for photon upconversion. Consisting of a bulk perovskite sensitiser alongside an adjacent organic semiconductor film, the upconverting system can absorb multiple low-energy photons to emit high-energy photons. In this work, density functional theory, in conjunction with GW theory, is utilised to investigate the electronic structure at the MAPbI$_3$/rubrene interface for different surface terminations of MAPbI$_3$. From this investigation, we reveal that the surface termination of the perovskite layer greatly affects the charge density at the interface and within the rubrene layer driven by the formation of interfacial dipole layers. The formation of a strong interfacial dipole for the lead-iodide terminated perovskite alters the band alignment of the heterojunction and is expected to facilitate more efficient hole transfer. For the perovskite surface terminated with the methylammonium iodide layer, the highest occupied molecular orbital of the adjacent rubrene layer lies deep within the perovskite band gap. This termination type is further characterized by a lower density of states near the band edges thereby acting as a spacer which is anticipated to decrease the probability of charge transfer across the interface. Thus based on our results, PbI$_2$-terminated perovskite surfaces are predicted to be favourable for applications where hole transfer to a rubrene layer is ideal, highlighting the significance of surface termination for all systems where the electronic environment at the interface is crucial to performance. △ Less

Submitted 10 October, 2024; originally announced October 2024.

The influence of pinholes and weak-points in aluminium-oxide Josephson junctions

Authors: K. Bayros, M. J. Cyster, J. S. Smith, J. H. Cole

Abstract: Josephson junctions are the key components used in superconducting qubits for quantum computing. The advancement of quantum computing is limited by a lack of stability and reproducibility of qubits which ultimately originates in the amorphous tunnel barrier of the Josephson junctions and other material imperfections. Pinholes in the junction have been suggested as one of the possible contributors… ▽ More Josephson junctions are the key components used in superconducting qubits for quantum computing. The advancement of quantum computing is limited by a lack of stability and reproducibility of qubits which ultimately originates in the amorphous tunnel barrier of the Josephson junctions and other material imperfections. Pinholes in the junction have been suggested as one of the possible contributors to these instabilities, but evidence of their existence and the effect they might have on transport is unclear. We use molecular dynamics to create three-dimensional atomistic models to describe Al-AlOx-Al tunnel junctions, showing that pinholes form when oxidation of the barrier is incomplete. Following this we use the atomistic model and simulate the electronic transport properties for tunnel junctions with different barrier thicknesses using the non-equilibrium Green's function formalism. We observe that pinholes may contribute to excess quasiparticle current flow in Al-AlOx-Al tunnel junctions with thinner barriers, and in thicker barriers we observe weak-points which facilitate leakage currents even when the oxide is continuous. We find that the disordered nature of the amorphous barrier results in significant variations in the transport properties. Additionally, we determine the current-phase relationship for our atomistic structures, confirming that devices with pinholes and weak-points cause a deviation from the ideal sinusoidal Josephson relationship. △ Less

Submitted 29 February, 2024; v1 submitted 27 November, 2023; originally announced November 2023.

Comments: 17 pages, 15 figures

Journal ref: Phys. Rev. Materials 8, 046202 (2024)

Plasmonically engineered nitrogen-vacancy spin readout

Authors: Harini Hapuarachchi, Francesco Campaioli, Fedor Jelezko, Jared H. Cole

Abstract: Ultra-precise readout of single nitrogen-vacancy (NV) spins hold promise for major advancements in quantum sensing and computing technologies. We predict significant brightness and contrast enhancements in NV spin qubit readout and optically detected magnetic resonance (ODMR) arising from plasmonic interaction. We present a rigorous theory verified using existing measurements in the literature for… ▽ More Ultra-precise readout of single nitrogen-vacancy (NV) spins hold promise for major advancements in quantum sensing and computing technologies. We predict significant brightness and contrast enhancements in NV spin qubit readout and optically detected magnetic resonance (ODMR) arising from plasmonic interaction. We present a rigorous theory verified using existing measurements in the literature for such predictions. Plasmonic spin readout enhancements selectively manifest in carefully engineered parameter regions, necessitating rigorous modelling prior to experimentation. △ Less

Submitted 23 November, 2023; originally announced November 2023.

Comments: 13 pages, 6 figures including supplementary material

Excitons and singlet fission at hybrid inorganic-organic semiconductor interfaces

Authors: M. V. Klymenko, L. Z. Tan, S. P. Russo, J. H. Cole

Abstract: Excitons in organic crystalline semiconductors play a crucial role in the operation of optoelectronic devices such as organic solar cells, light-emitting diodes, and photodetectors. The excitonic properties of materials are dramatically affected by the presence of surfaces and interfaces. In this work, we investigate the influence of a neutral hydrogen-passivated 1x2 reconstructed (100) silicon su… ▽ More Excitons in organic crystalline semiconductors play a crucial role in the operation of optoelectronic devices such as organic solar cells, light-emitting diodes, and photodetectors. The excitonic properties of materials are dramatically affected by the presence of surfaces and interfaces. In this work, we investigate the influence of a neutral hydrogen-passivated 1x2 reconstructed (100) silicon substrate on excitons within the crystalline tetracene layer deposited on the top of it. Our findings reveal that singlet excitons in the contact tetracene layer are situated within the continuum of unbound Wannier-Mott excitonic states in silicon, with noteworthy hybridization between these states. Consequently, in the contact tetracene layer, all singlet excitons exhibit a pronounced interlayer charge transfer character, while the triplet exciton remains confined to the tetracene layer. This makes the singlet fission effect highly improbable for the contact tetracene layer. Additionally, the presence of the silicon substrate results in a modification of the singlet-triplet gap by 144 meV. This change is solely attributed to the hybridization with excitons in silicon, which influences the exchange energy. Our results show that the dynamic dielectric screening caused by the substrate does not impact the singlet-triplet gap but alters the exciton binding energies. △ Less

Submitted 24 October, 2023; originally announced October 2023.

Comments: 26 pages, 7 figures

Non-Drude THz conductivity of graphene due to structural distortions

Authors: Tan-Phat Nguyen, Mykhailo Klymenko, Gary Beane, Mitko Oldfield, Kaijian Xing, Matthew Gebert, Semonti Bhattacharyya, Michael S. Fuhrer, Jared H. Cole, Agustin Schiffrin

Abstract: The remarkable electrical, optical and mechanical properties of graphene make it a desirable material for electronics, optoelectronics and quantum applications. A fundamental understanding of the electrical conductivity of graphene across a wide frequency range is required for the development of such technologies. In this study, we use terahertz (THz) time-domain spectroscopy to measure the comple… ▽ More The remarkable electrical, optical and mechanical properties of graphene make it a desirable material for electronics, optoelectronics and quantum applications. A fundamental understanding of the electrical conductivity of graphene across a wide frequency range is required for the development of such technologies. In this study, we use terahertz (THz) time-domain spectroscopy to measure the complex dynamic conductivity of electrostatically gated graphene, in a broad $\sim$0.1 - 7 THz frequency range. The conductivity of doped graphene follows the conventional Drude model, and is predominantly governed by intraband processes. In contrast, undoped charge-neutral graphene exhibits a THz conductivity that significantly deviates from Drude-type models. Via quantum kinetic equations and density matrix theory, we show that this discrepancy can be explained by additional interband processes, that can be exacerbated by electron backscattering. We propose a mechanism where such backscattering -- which involves flipping of the electron pseudo-spin -- is mediated by the substantial vector scattering potentials that are associated with structural deformations of graphene. Our findings highlight the significant impact that structural distortions and resulting electrostatic vector scattering potentials can have on the THz conductivity of charge-neutral graphene. Our results emphasise the importance of the planar morphology of graphene for its broadband THz electronic response. △ Less

Submitted 9 October, 2023; originally announced October 2023.

Comments: 74 pages, 21 figures

Phase transformation-induced superconducting aluminium-silicon alloy rings

Authors: B. C. Johnson, M. Stuiber, D. L. Creedon, A. Berhane, L. H. Willems van Beveren, S. Rubanov, J. H. Cole, V. Mourik, A. R. Hamilton, T. L. Duty, J. C. McCallum

Abstract: The development of a materials platform that exhibits both superconducting and semiconducting properties is an important endeavour for a range of emerging quantum technologies. We investigate the formation of superconductivity in nanowires fabricated with silicon-on-insulator (SOI). Aluminium from deposited contact electrodes is found to interdiffuses with the Si nanowire structures to form an Al-… ▽ More The development of a materials platform that exhibits both superconducting and semiconducting properties is an important endeavour for a range of emerging quantum technologies. We investigate the formation of superconductivity in nanowires fabricated with silicon-on-insulator (SOI). Aluminium from deposited contact electrodes is found to interdiffuses with the Si nanowire structures to form an Al-Si alloy along the entire length of the predefined nanowire device over micron length scales at temperatures well below that of the Al-Si eutectic. The resultant transformed nanowire structures are layered in geometry with a continuous Al-Si alloy wire sitting on the buried oxide of the SOI and a residual Si cap sitting on top of the wire. The phase transformed material is conformal with any predefined device patterns and the resultant structures are exceptionally smooth-walled compared to similar nanowire devices formed by silicidation processes. The superconducting properties of a mesoscopic AlSi ring formed on a SOI platform are investigated. Low temperature magnetoresistance oscillations, quantized in units of the fluxoid, h/2e, are observed. △ Less

Submitted 12 July, 2022; originally announced July 2022.

Comments: 11 pages, 9 figures

Exciton-polaron interactions in monolayer WS$_2$

Authors: Jack B. Muir, Jesper Levinsen, Stuart K. Earl, Mitchell A. Conway, Jared H. Cole, Matthias Wurdack, Rishabh Mishra, David J. Ing, Eliezer Estrecho, Yuerui Lu, Dmitry K. Efimkin, Jonathan O. Tollerud, Elena A. Ostrovskaya, Meera M. Parish, Jeffrey A. Davis

Abstract: Interactions between quasiparticles are of fundamental importance and ultimately determine the macroscopic properties of quantum matter. A famous example is the phenomenon of superconductivity, which arises from attractive electron-electron interactions that are mediated by phonons or even other more exotic fluctuations in the material. Here we introduce mobile exciton impurities into a two-dimens… ▽ More Interactions between quasiparticles are of fundamental importance and ultimately determine the macroscopic properties of quantum matter. A famous example is the phenomenon of superconductivity, which arises from attractive electron-electron interactions that are mediated by phonons or even other more exotic fluctuations in the material. Here we introduce mobile exciton impurities into a two-dimensional electron gas and investigate the interactions between the resulting Fermi polaron quasiparticles. We employ multi-dimensional coherent spectroscopy on monolayer WS$_2$, which provides an ideal platform for determining the nature of polaron-polaron interactions due to the underlying trion fine structure and the valley specific optical selection rules. At low electron doping densities, we find that the dominant interactions are between polaron states that are dressed by the same Fermi sea. In the absence of bound polaron pairs (bipolarons), we show using a minimal microscopic model that these interactions originate from a phase-space filling effect, where excitons compete for the same electrons. We furthermore reveal the existence of a bipolaron bound state with remarkably large binding energy, involving excitons in different valleys cooperatively bound to the same electron. Our work lays the foundation for probing and understanding strong electron correlation effects in two-dimensional layered structures such as moiré superlattices. △ Less

Submitted 23 June, 2022; originally announced June 2022.

Journal ref: Nature Communications 13, 6164 (2022)

Quintet formation and exchange fluctuations: The role of stochastic resonance in singlet fission

Authors: Miles I. Collins, Francesco Campaioli, Murad J. Y. Tayebjee, Jared H. Cole, Dane R. McCamey

Abstract: Singlet fission describes the spin-conserving production of two triplet excitons from one singlet exciton. The existence of a spin-2 (quintet) triplet-pair state as a product of singlet fission is well established in the literature, and control of quintet formation is an important step towards applying singlet fission in photovoltaics and quantum information. However, a definitive mechanism for qu… ▽ More Singlet fission describes the spin-conserving production of two triplet excitons from one singlet exciton. The existence of a spin-2 (quintet) triplet-pair state as a product of singlet fission is well established in the literature, and control of quintet formation is an important step towards applying singlet fission in photovoltaics and quantum information. However, a definitive mechanism for quintet formation is yet to be established, which makes it difficult to design materials for optimal quintet formation. Here we outline a mechanism in which inter-triplet exchange coupling fluctuations drive fast and efficient quintet formation. In contrast with conventional wisdom, we show that quintet population can arise despite strong exchange coupling. We evaluate the performance of this quintet formation mechanism in two regimes of conformational freedom, and relate quintet dynamics to material properties of singlet fission molecules. △ Less

Submitted 1 June, 2022; originally announced June 2022.

Comments: 10 pages, 5 figures

Optical interaction of the NV- centre in diamond with a plasmonic metal nanoparticle

Authors: Harini Hapuarachchi, Francesco Campaioli, Jared H. Cole

Abstract: We present a rigorous theoretical model for the optical interaction between a nitrogen-vacancy (NV) centre in diamond and a plasmonic metal nanoparticle (MNP), accompanied by a computationally efficient procedure to solve the evolution. The proposed model enables us to successfully explain existing optical emission measurements of NV centres both in the presence and absence of a metal nanoparticle… ▽ More We present a rigorous theoretical model for the optical interaction between a nitrogen-vacancy (NV) centre in diamond and a plasmonic metal nanoparticle (MNP), accompanied by a computationally efficient procedure to solve the evolution. The proposed model enables us to successfully explain existing optical emission measurements of NV centres both in the presence and absence of a metal nanoparticle. We show that the NV-plasmon interaction provides a versatile new avenue to enhance and control the optical emission of an NV centre. Changes to the MNP type and size, NV-MNP centre separation, submerging medium permittivity, and NV orientation with respect to the MNP surface can be exploited to improve a plethora of NV centre based nanodevices. △ Less

Submitted 10 February, 2022; originally announced February 2022.

Comments: 8 pages, 4 figures with attached supplementary material of 8 pages and 1 figure

Proposal for a Negative Capacitance Topological Quantum Field-Effect Transistor

Authors: Michael S. Fuhrer, Mark T. Edmonds, Dimitrie Culcer, Muhammad Nadeem, Xiaolin Wang, Nikhil Medhekar, Yuefeng Yin, Jared H Cole

Abstract: A topological quantum field effect transistor (TQFET) uses electric field to switch a material from topological insulator ("on", with conducting edge states) to a conventional insulator ("off"), and can have low subthreshold swing due to strong Rashba spin-orbit interaction. Numerous materials have been proposed, and electric field switching has been demonstrated in ultrathin Na${_3}$Bi. Here we p… ▽ More A topological quantum field effect transistor (TQFET) uses electric field to switch a material from topological insulator ("on", with conducting edge states) to a conventional insulator ("off"), and can have low subthreshold swing due to strong Rashba spin-orbit interaction. Numerous materials have been proposed, and electric field switching has been demonstrated in ultrathin Na${_3}$Bi. Here we propose a negative capacitance (NC) TQFET which uses a ferroelectric to amplify the electric field and potentially achieve very low switching voltages and energies. Materials challenges for realizing the NC-TQFET are discussed. △ Less

Submitted 13 January, 2022; originally announced January 2022.

Comments: Accepted version of paper number 38-2 presented at the 67th Annual IEEE International Electron Devices Meeting (IEDM) on 15 December 2021

A many-body perturbation theory approach to energy band alignment at the crystalline tetracene-silicon interface

Authors: M. V. Klymenko, L. Z. Tan, S. P. Russo, J. H. Cole

Abstract: Hybrid inorganic-organic semiconductor interfaces are of interest for new photovoltaic devices operating above the Shockley-Queisser limit. Predicting energy band alignment at the interfaces is crucial for their design, but represents a challenging problem due to the large scales of the system, the energy precision required and a wide range of physical phenomena that occur at the interface. To tac… ▽ More Hybrid inorganic-organic semiconductor interfaces are of interest for new photovoltaic devices operating above the Shockley-Queisser limit. Predicting energy band alignment at the interfaces is crucial for their design, but represents a challenging problem due to the large scales of the system, the energy precision required and a wide range of physical phenomena that occur at the interface. To tackle this problem, we use many-body perturbation theory in the non-self-consistent GW approximation, orbital relaxation corrections for organic semiconductors, and line-up potential method for inorganic semiconductors which allows for tractable and accurate computing of energy band alignment in crystalline van-der-Waals hybrid inorganic-organic semiconductor interfaces. In this work, we study crystalline tetracene physisorbed on the clean hydrogen-passivated 1x2 reconstructed (100) silicon surface. Using this computational approach, we find that the energy band alignment is determined by an interplay of the mutual dynamic dielectric screening of two materials and the formation of a dipole layer due to a weak hybridization of atomic/molecular orbitals at the interface. We also emphasize the significant role of the exchange-correlation effects in predicting band offsets for the hybrid inorganic-organic semiconductor interfaces. △ Less

Submitted 10 June, 2022; v1 submitted 22 December, 2021; originally announced December 2021.

Journal ref: Adv. Theory Simul. 2022, 5, 2200413

Microscopic quantum point contact formation as the electromigration mechanism in granular superconductor nanowires

Authors: T. C. Bartolo, J. S. Smith, Yannick Schön, Jan Nicolas Voss, M. J. Cyster, A. V. Ustinov, H. Rotzinger, J. H. Cole

Abstract: Granular aluminium is a high kinetic inductance thin film superconductor which, when formed into nanowires can undergo an intrinsic electromigration process. We use a combination of experimental and computational approaches to investigate the role of grain morphology and distribution in granular aluminium thin films, when formed into nanowire constrictions. Treating the granular aluminium film as… ▽ More Granular aluminium is a high kinetic inductance thin film superconductor which, when formed into nanowires can undergo an intrinsic electromigration process. We use a combination of experimental and computational approaches to investigate the role of grain morphology and distribution in granular aluminium thin films, when formed into nanowire constrictions. Treating the granular aluminium film as a network of randomly distributed resistors with parameters motivated by the film microstructure allows us to model the electrical characteristics of the nanowires. This model provides estimates of the dependence of sheet resistance on grain size and distribution, and the resulting device to device variation for superconducting nanowires. By fabricating a series of different length nanowires, we study the electromigration process as a function of applied current, and then compare directly to the results of our computational model. In doing so we show that the electromigration is driven by the formation of quantum point contacts between metallic aluminium grains. △ Less

Submitted 24 November, 2021; originally announced November 2021.

Comments: 11 pages, 11 figures

The effect of magnetic impurity scattering on transport in topological insulators

Authors: Jesse A. Vaitkus, Cong Son Ho, Jared H. Cole

Abstract: Charge transport in topological insulators is primarily characterised by so-called topologically projected helical edge states, where charge carriers are correlated in spin and momentum. In principle, dissipation-less current can be carried by these edge states as backscattering from impurities and defects is suppressed as long as time-reversal symmetry is not broken. However, applied magnetic fie… ▽ More Charge transport in topological insulators is primarily characterised by so-called topologically projected helical edge states, where charge carriers are correlated in spin and momentum. In principle, dissipation-less current can be carried by these edge states as backscattering from impurities and defects is suppressed as long as time-reversal symmetry is not broken. However, applied magnetic fields or underlying nuclear spin-defects in the substrate can break this time reversal symmetry. In particular, magnetic impurities lead to back-scattering by spin-flip processes. We have investigated the effects of point-wise magnetic impurities on the transport properties of helical edge states in the BHZ model using the Non-Equilibrium Green's Function formalism and compared the results to a semi-analytic approach. Using these techniques we study the influence of impurity strength and spin impurity polarization. We observe a secondary effect of defect-defect interaction that depends on the underlying material parameters which introduces a non-monotonic response of the conductance to defect density. This in turn suggests a qualitative difference in magneto-transport signatures in the dilute and high density spin impurity limits. △ Less

Submitted 21 October, 2021; originally announced October 2021.

Comments: 14 pages, 7 figures + appendices

Singlet exciton dynamics of perylene diimide and tetracene based hetero/homogeneous substrates via an \textit{ab initio} kinetic Monte Carlo model

Authors: Anjay Manian, Francesco Campaioli, Igor Lyskov, Jared H. Cole, Salvy P. Russo

Abstract: Luminescent solar concentrators (LSCs) are devices that trap a portion of the solar spectrum and funnel it towards photon harvesting devices. The modelling of LSCs at a quantum chemical level however, remains a challenge due to the complexity of exciton and photon dynamic modelling. This study examines singlet exciton dynamics occurring within a typical LSC device. To do this, we use a rejection-f… ▽ More Luminescent solar concentrators (LSCs) are devices that trap a portion of the solar spectrum and funnel it towards photon harvesting devices. The modelling of LSCs at a quantum chemical level however, remains a challenge due to the complexity of exciton and photon dynamic modelling. This study examines singlet exciton dynamics occurring within a typical LSC device. To do this, we use a rejection-free kinetic Monte Carlo method to predict diffusion lengths, diffusion coefficients, substrate anisotropy, and average exciton lifetimes of perylene diimide (PDI) and tetracene based substrates in the low concentration scheme. \textit{Ab initio} rate constants are computed using time-dependant density functional theory based methods. PDI type substrates are observed to display enhanced singlet exciton transport properties when compared to tetracene. Simulations show that substrates with dipole-aligned chromophores are characterised by anisotropic exciton diffusion, with slightly improved transport properties. Finally, a PDI-tetracene substrate is simulated for both disordered and dipole-aligned chromophore configurations. In this multi-dopant substrate transport is predominantly mediated by PDI due to the asymmetry in the transport rates between the two dyes considered. We conclude discussing the properties of multi-dopant substrates and how they can impact the design of next generation LSCs. △ Less

Submitted 27 September, 2021; originally announced October 2021.

Comments: 12 pages, 6 figures, 3 tables, Submitted to The Journal of Physical Chemistry

Enhanced Control of Quantum Dot Photoluminescence in Hybrid Assemblies

Authors: Anum Nisar, Harini Hapuarachchi, Laurent Lermusiaux, Jared H. Cole, Alison M. Funston

Abstract: The distance-dependent interaction of an emitter with a plasmonic nanoparticle or surface forms the basis of the field of plexitonics. Semiconductor quantum dots (QDs) are robust emitters due to their photostability, and offer the possibility of understanding the fundamental photophysics between one emitter and one metal nanoparticle. A key enabling challenge is the formation of systems containing… ▽ More The distance-dependent interaction of an emitter with a plasmonic nanoparticle or surface forms the basis of the field of plexitonics. Semiconductor quantum dots (QDs) are robust emitters due to their photostability, and offer the possibility of understanding the fundamental photophysics between one emitter and one metal nanoparticle. A key enabling challenge is the formation of systems containing both QDs and plasmonic nanoparticles in high purity. We present the translation of DNA-based self-assembly techniques to assemble metal and semiconductor nanocrystals into discrete hybrid structures, including dimers, of high purity. This method gives control over the interparticle separation, geometry, and ratio of QD:metal nanoparticle, as well as the spectral properties of the metal/QD components in the assembly to allow investigation of plasmon-exciton interaction. The hybrid assemblies show the expected enhancement in steady-state photoluminescence accompanied by an increase in the QD emission rate for assemblies with a strong overlap between the QD emission and localised surface plasmon resonance. In contrast, lengthening of the QD emission lifetime (a reduction of the emission rate) of up to 1.7-fold, along with an enhancement in steady-state PL of 15-75% is observed upon detuning of the QD and metal nanoparticle spectral properties. This understood in terms of the Purcell effect, where the gold nanoparticle acts as a damped, nanoscale cavity. Considering the metal nanoparticle using generalised nonlocal optical response theory (GNOR) and the QD as an open quantum system, the response is driven by the interference experienced by the emitter for parallel and perpendicular field orientations. This provides a mechanism for control of the emission rate of a QD by a metal nanoparticle across a much wider range of lifetimes than previously understood. △ Less

Submitted 17 September, 2021; originally announced September 2021.

Comments: 51 pages, 8 figures

Influence of device geometry and imperfections on the interpretation of transverse magnetic focusing experiments

Authors: Yik K. Lee, Jackson S. Smith, Jared H. Cole

Abstract: Spatially separating electrons of different spins and efficiently generating spin currents are crucial steps towards building practical spintronics devices. Transverse magnetic focusing is a potential technique to accomplish both those tasks. In a material where there is significant Rashba spin--orbit interaction, electrons of different spins will traverse different paths in the presence of an ext… ▽ More Spatially separating electrons of different spins and efficiently generating spin currents are crucial steps towards building practical spintronics devices. Transverse magnetic focusing is a potential technique to accomplish both those tasks. In a material where there is significant Rashba spin--orbit interaction, electrons of different spins will traverse different paths in the presence of an external magnetic field. Experiments have demonstrated the viability of this technique by measuring conductance spectra that indicate the separation of spin-up and spin-down electrons. However the effect that the geometry of the leads has on these measurements is not well understood. We show that the resolution of features in the conductance spectra is affected by the shape, separation and width of the leads. Furthermore, the number of subbands occupied by the electrons in the leads affects the ratio between the amplitudes of the spin-split peaks in the spectra. We simulated devices with random onsite potentials and observed that transverse magnetic focusing devices are sensitive to disorder. Ultimately we show that careful choice and characterisation of device geometry is crucial for correctly interpreting the results of transverse magnetic focusing experiments. △ Less

Submitted 18 March, 2022; v1 submitted 26 April, 2021; originally announced April 2021.

Comments: 13 pages, 13 figures. Final version with minor revisions from previous version

Accurate calculation of excitonic signatures in the absorption spectrum of BiSBr using semiconductor Bloch equations

Authors: Jamie M. Booth, Mike V. Klymenko, Jared H. Cole, Salvy P. Russo

Abstract: In order to realize the significant potential of optical materials such as metal halides, computational techniques which give accurate optical properties are needed, which can work hand-in-hand with experiments to generate high efficiency devices. In this work a computationally efficient technique based on semiconductor Bloch equations (SBEs) is developed and applied to the material BiSBr. This ap… ▽ More In order to realize the significant potential of optical materials such as metal halides, computational techniques which give accurate optical properties are needed, which can work hand-in-hand with experiments to generate high efficiency devices. In this work a computationally efficient technique based on semiconductor Bloch equations (SBEs) is developed and applied to the material BiSBr. This approach gives excellent agreement with the experimental optical gap, and also agrees closely with the excitonic stabilisation energy and the absorption spectrum computed using the far more computationally demanding \textit{ab initio} Bethe-Salpeter approach. The SBE method is a good candidate for theoretical spectroscopy on large- or low dimensional systems which are too computationally expensive for an \textit{ab initio} treatment. △ Less

Submitted 2 March, 2021; originally announced March 2021.

Comments: 8 pages, 3 figures

Localized Wannier function based tight-binding models for two-dimensional allotropes of bismuth

Authors: Qile Li, Jackson S. Smith, Yuefeng Yin, Chutian Wang, Mykhailo V. Klymenko, Jared H. Cole, Nikhil V. Medhekar

Abstract: With its monoelemental composition, various crystalline forms and an inherently strong spin-orbit coupling, bismuth has been regarded as an ideal prototype material to expand our understanding of topological electronic structures. In particular, two-dimensional bismuth thin films have attracted a growing interest due to potential applications in topological transistors and spintronics. This calls… ▽ More With its monoelemental composition, various crystalline forms and an inherently strong spin-orbit coupling, bismuth has been regarded as an ideal prototype material to expand our understanding of topological electronic structures. In particular, two-dimensional bismuth thin films have attracted a growing interest due to potential applications in topological transistors and spintronics. This calls for an effective physical model to give an accurate interpretation of the novel topological phenomena shown by two-dimensional bismuth. However, the conventional semi-empirical approach of adapting bulk bismuth hoppings fails to capture the topological features of two-dimensional bismuth allotropes because the electronic band topology is heavily influenced by crystalline symmetries as well as atom spacings. Here we provide a new parameterization using localized Wannier functions derived from the Bloch states in first-principles calculations. We construct new tight-binding models for three types of two-dimensional bismuth allotropes: a Bi (111) bilayer, bismuthene and a Bi(110) bilayer. We demonstrate that our tight-binding models can successfully reproduce the band structures, symmetries and topological features of these two-dimensional allotropes. We anticipate that these models can be extended to other similar two-dimensional topological structures such as antimonene and arsenene. Moreover, these models can serve as a starting point for investigating the electron/spin transport and electromagnetic response in low-dimensional topological devices. △ Less

Submitted 22 February, 2021; originally announced February 2021.

Comments: 20 pages, 6 figures

Journal ref: New J. Phys. 23, 063042 (2021)

Exciton transport in amorphous polymers and the role of morphology and thermalisation

Authors: Francesco Campaioli, Jared H. Cole

Abstract: Understanding the transport mechanism of electronic excitations in conjugated polymers is key to advancing organic optoelectronic applications, such as solar cells, OLEDs and flexible electronics. While crystalline polymers can be studied using solid-state techniques based on lattice periodicity, the characterisation of amorphous polymers is hindered by an intermediate regime of disorder and the a… ▽ More Understanding the transport mechanism of electronic excitations in conjugated polymers is key to advancing organic optoelectronic applications, such as solar cells, OLEDs and flexible electronics. While crystalline polymers can be studied using solid-state techniques based on lattice periodicity, the characterisation of amorphous polymers is hindered by an intermediate regime of disorder and the associated lack of symmetries. To overcome these hurdles we use a reduced state quantum master equation approach based on the Merrifield exciton formalism. Using this model we study exciton transport in conjugated polymers and its dependence on morphology and temperature. Exciton dynamics consists of a thermalisation process, whose features depend on the relative strength of thermal energy, electronic couplings and disorder, resulting in remarkably different transport regimes. By applying this method to representative systems based on poly(p-phenylene vinylene) (PPV) we obtain insight into the role of temperature and disorder on localisation, charge separation, non-equilibrium dynamics, and experimental accessibility of thermal equilibrium states of excitons in amorphous polymers. △ Less

Submitted 8 February, 2021; originally announced February 2021.

Comments: 11 pages, 4 figures, 2 tables

Stability of superconducting resonators: motional narrowing and the role of Landau-Zener driving of two-level defects

Authors: David Niepce, Jonathan J. Burnett, Marina Kudra, Jared H. Cole, Jonas Bylander

Abstract: Frequency instability of superconducting resonators and qubits leads to dephasing and time-varying energy-loss and hinders quantum-processor tune-up. Its main source is dielectric noise originating in surface oxides. Thorough noise studies are needed in order to develop a comprehensive understanding and mitigation strategy of these fluctuations. Here we use a frequency-locked loop to track the res… ▽ More Frequency instability of superconducting resonators and qubits leads to dephasing and time-varying energy-loss and hinders quantum-processor tune-up. Its main source is dielectric noise originating in surface oxides. Thorough noise studies are needed in order to develop a comprehensive understanding and mitigation strategy of these fluctuations. Here we use a frequency-locked loop to track the resonant-frequency jitter of three different resonator types---one niobium-nitride superinductor, one aluminium coplanar waveguide, and one aluminium cavity---and we observe strikingly similar random-telegraph-signal fluctuations. At low microwave drive power, the resonators exhibit multiple, unstable frequency positions, which for increasing power coalesce into one frequency due to motional narrowing caused by sympathetic driving of individual two-level-system defects by the resonator. In all three devices we probe a dominant fluctuator, finding that its amplitude saturates with increasing drive power, but its characteristic switching rate follows the power-law dependence of quasiclassical Landau-Zener transitions. △ Less

Submitted 16 August, 2020; originally announced August 2020.

Aharonov-Bohm interference as a probe of Majorana fermions

Authors: T. C. Bartolo, J. S. Smith, B. Muralidharan, C. Müller, T. M. Stace, J. H. Cole

Abstract: Majorana fermions act as their own antiparticle, and they have long been thought to be confined to the realm of pure theory. However, interest in them has recently resurfaced, as it was realized through the work of Kitaev that some experimentally accessible condensed matter systems can host these exotic excitations as bound states on the boundaries of 1D chains, and that their topological and non-… ▽ More Majorana fermions act as their own antiparticle, and they have long been thought to be confined to the realm of pure theory. However, interest in them has recently resurfaced, as it was realized through the work of Kitaev that some experimentally accessible condensed matter systems can host these exotic excitations as bound states on the boundaries of 1D chains, and that their topological and non-abelian nature holds promise for quantum computation. Unambiguously detecting the experimental signatures of Majorana bound states has turned out to be challenging, as many other phenomena lead to similar experimental behaviour. Here, we computationally study a ring comprised of two Kitaev model chains with tunnel coupling between them, where an applied magnetic field allows for Aharonov-Bohm interference in transport through the resulting ring structure. We use a non-equilibrium Green's function technique to analyse the transport properties of the ring in both the presence and absence of Majorana zero modes. Further, we show that these results are robust against weak disorder in the presence of an applied magnetic field. This computational model suggests another signature for the presence of these topologically protected bound states can be found in the magnetic field dependence of devices with loop geometries. △ Less

Submitted 13 August, 2021; v1 submitted 28 June, 2020; originally announced June 2020.

Comments: 12 pages, 10 figures. Included new section about disorder in the nanowires and the effect of this on our results

Journal ref: Phys. Rev. Research 2, 043430 (2020)

Insulating, metallic and superconducting behavior in a single nanowire

Authors: Jan Nicolas Voss, Yannick Schön, Micha Wildermuth, Dominik Dorer, Jared H. Cole, Hannes Rotzinger, Alexey V. Ustinov

Abstract: In systems with reduced dimensions quantum fluctuations have a strong influence on the electronic conduction, even at very low temperature. In superconductors this is especially interesting, since the coherent state of the superconducting electrons is strongly interacting with these fluctuations and therefore is a sensitive tool to study them. In this paper, we report on comprehensive measurements… ▽ More In systems with reduced dimensions quantum fluctuations have a strong influence on the electronic conduction, even at very low temperature. In superconductors this is especially interesting, since the coherent state of the superconducting electrons is strongly interacting with these fluctuations and therefore is a sensitive tool to study them. In this paper, we report on comprehensive measurements of superconducting nanowires in the quantum phase slip regime. Using an intrinsic electromigration process, we have developed a method to lower the resistance of lithographically fabricated highly resistive nanowires in situ and in small consecutive steps. At low temperature we observe critical (Coulomb) blockade voltages and superconducting critical currents, depending on the nanowire's normal-state resistance, in good agreement with theoretical models. Between these two regimes, we find a continuous transition displaying a nonlinear metallic-like behavior. The reported intrinsic electromigration technique is not limited to low temperatures as we find a similar change in resistance that spans over three orders of magnitude also at room temperature. Aside from superconducting quantum circuits, such a technique to reduce the resistance may also have applications in modern electronic circuits. △ Less

Submitted 11 June, 2020; originally announced June 2020.

The influence of a planar metal nanoparticle assembly on the optical response of a quantum emitter

Authors: Harini Hapuarachchi, Jared H. Cole

Abstract: We develop an analytical framework to study the influence of a weakly intercoupled inplane spherical metal nanoparticle (MNP) assembly on a coherently illuminated quantum emitter (QE). We reduce the analytical expressions derived for the aforementioned generic planar setup into simple and concise expressions representing a QE mediated by a symmetric MNP constellation, by exploiting the symmetry. W… ▽ More We develop an analytical framework to study the influence of a weakly intercoupled inplane spherical metal nanoparticle (MNP) assembly on a coherently illuminated quantum emitter (QE). We reduce the analytical expressions derived for the aforementioned generic planar setup into simple and concise expressions representing a QE mediated by a symmetric MNP constellation, by exploiting the symmetry. We use the recently introduced generalized nonlocal optical response (GNOR) theory that has successfully explained plasmonic experiments to model the MNPs in our system. Due to the use of GNOR theory, and our analytical approach, the procedure we suggest is extremely computationally efficient. Using the derived model, we analyse the absorption rate, resultant Rabi frequency, effective excitonic energy shift and dephasing rate shift spectra of an exciton bearing QE at the centre of a symmetric MNP setup. We observe that the QE experiences plasmon induced absorption rate spectral linewidth variations that increase in magnitude with decreasing MNP-QE centre separation and increasing number of MNPs. Our results also suggest that, parameter regions where the QE exhibits trends of decreasing linewidth against decreasing MNP-QE centre separation are likely to be associated with plasmon induced excitonic energy redshifts. Similarly, regions where the QE absorption rate linewidth tends to increase against decreasing MNP QE centre separation are likely to be accompanied by plasmon induced excitonic energy blueshifts. In both these cases, the magnitude of the observed red/blueshift was seen to increase with the number of MNPs in the constellation, due to enhancement of the plasmonic influence. △ Less

Submitted 3 June, 2020; originally announced June 2020.

Journal ref: Phys. Rev. Research 2, 043092 (2020)

Simulating the fabrication of aluminium oxide tunnel junctions

Authors: M. J. Cyster, J. S. Smith, N. Vogt, G. Opletal, S. P. Russo, J. H. Cole

Abstract: Aluminium oxide (AlO$_\mathrm{x}$) tunnel junctions are important components in a range of nanoelectric devices including superconducting qubits where they can be used as Josephson junctions. While many improvements in the reproducibility and reliability of qubits have been made possible through new circuit designs, there are still knowledge gaps in the relevant materials science. A better underst… ▽ More Aluminium oxide (AlO$_\mathrm{x}$) tunnel junctions are important components in a range of nanoelectric devices including superconducting qubits where they can be used as Josephson junctions. While many improvements in the reproducibility and reliability of qubits have been made possible through new circuit designs, there are still knowledge gaps in the relevant materials science. A better understanding of how fabrication conditions affect the density, uniformity, and elemental composition of the oxide barrier may lead to the development of lower noise and more reliable nanoelectronics and quantum computers. In this paper we use molecular dynamics to develop models of Al-AlO$_\mathrm{x}$-Al junctions by iteratively growing the structures with sequential calculations. With this approach we can see how the surface oxide grows and changes during the oxidation simulation. Dynamic processes such as the evolution of a charge gradient across the oxide, the formation of holes in the oxide layer, and changes between amorphous and semi-crystalline phases are observed. Our results are widely in agreement with previous work including reported oxide densities, self-limiting of the oxidation, and increased crystallinity as the simulation temperature is raised. The encapsulation of the oxide with metal evaporation is also studied atom by atom. Low density regions at the metal-oxide interfaces are a common feature in the final junction structures which persists for different oxidation parameters, empirical potentials, and crystal orientations of the aluminium substrate. △ Less

Submitted 14 May, 2020; v1 submitted 13 May, 2020; originally announced May 2020.

Comments: 14 pages, 16 figures

Journal ref: npj Quantum Inf 7, 12 (2021)

Acoustic spectral hole-burning in a two-level system ensemble

Authors: Gustav Andersson, André Luiz Oliveira Bilobran, Marco Scigliuzzo, Mauricio M. de Lima, Jared H. Cole, Per Delsing

Abstract: Microscopic two-level system (TLS) defects at dielectric surfaces and interfaces are among the dominant sources of loss in superconducting quantum circuits, and their properties have been extensively probed using superconducting resonators and qubits. We report on spectroscopy of TLSs coupling to the strain field in a surface acoustic wave (SAW) resonator. The narrow free spectral range of the res… ▽ More Microscopic two-level system (TLS) defects at dielectric surfaces and interfaces are among the dominant sources of loss in superconducting quantum circuits, and their properties have been extensively probed using superconducting resonators and qubits. We report on spectroscopy of TLSs coupling to the strain field in a surface acoustic wave (SAW) resonator. The narrow free spectral range of the resonator allows for two-tone spectroscopy where a strong pump is applied at one resonance while a weak signal is used to probe a different mode. We map the spectral hole burnt by the pump tone as a function of frequency and extract parameters of the TLS ensemble. Our results suggest that detuned acoustic pumping can be used to enhance the coherence of superconducting devices by saturating TLSs. △ Less

Submitted 6 December, 2021; v1 submitted 21 February, 2020; originally announced February 2020.

Does the boson peak survive in an ultrathin oxide glass?

Authors: D. L. Cortie, M. J. Cyster, J. S. Smith, G. N. Iles, X. L. Wang, D. R. G. Mitchell, R. A. Mole, N. de Souza, D. Yu, J. H. Cole

Abstract: Bulk glasses exhibit extra vibrational modes at low energies, known as the boson peak. The microscopic dynamics in nanoscale alumina impact the performance of qubits and other superconducting devices, however the existence of the boson peak in these glasses has not been previously measured. Here we report neutron spectroscopy on Al/Al$_2$O$_{3-x}$ nanoparticles consisting of spherical metallic cor… ▽ More Bulk glasses exhibit extra vibrational modes at low energies, known as the boson peak. The microscopic dynamics in nanoscale alumina impact the performance of qubits and other superconducting devices, however the existence of the boson peak in these glasses has not been previously measured. Here we report neutron spectroscopy on Al/Al$_2$O$_{3-x}$ nanoparticles consisting of spherical metallic cores from 20 to 1000 nm surrounded by a 3.5 nm thick alumina glass. An intense low-energy peak is observed at $ω_{BP}$ = 2.8 $\pm$ 0.6 meV for highly oxidised particles, concurrent with an excess in the density of states. The intensity of the peak scales inversely with particle size and oxide fraction indicating a surface origin, and is red-shifted by 3 meV with respect to the van-Hove singularity of $γ$-phase Al$_2$O$_{3-x}$ nanocrystals. Molecular dynamics simulations of $α$-Al$_2$O$_{3-x}$, $γ$-Al$_2$O$_{3-x}$ and a-Al$_2$O$_{3-x}$ show that the observed boson peak is a signature of the ultrathin glass surface, and the frequency is softened compared to that of the hypothetical bulk glass. △ Less

Submitted 28 July, 2019; originally announced July 2019.

Comments: 5 pages, 3 figures [main manuscript] + supplemental

Journal ref: Phys. Rev. Research 2, 023320 (2020)

First-Principles Calculation of Triplet Exciton Diffusion in Crystalline Poly($p$-phenylene vinylene)

Authors: Igor Lyskov, Egor Trushin, Ben Q. Baragiola, Timothy W. Schmidt, Jared H. Cole, Salvy P. Russo

Abstract: Understanding and controlling exciton transport is a strategic way to enhance the optoelectronic properties of high-performance organic devices. In this article we study triplet exciton migration in crystalline poly($p$-phenylene vinylene) polymer (PPV) using comprehensive electronic structure and quantum dynamical methods. We solve the coupled electron-nuclear dynamics for the triplet energy migr… ▽ More Understanding and controlling exciton transport is a strategic way to enhance the optoelectronic properties of high-performance organic devices. In this article we study triplet exciton migration in crystalline poly($p$-phenylene vinylene) polymer (PPV) using comprehensive electronic structure and quantum dynamical methods. We solve the coupled electron-nuclear dynamics for the triplet energy migrating between two neighboring Frenkel sites in J- and H-aggregate arrangements. From the two-site model we extract key parameters for use with a master-equation approach that allows us to treat nanosize systems where time-dependent Schrödinger equation becomes intractable. We calculate the transient exciton density evolution and determine the diffusion constants along the principal crystal axes of the PPV. The triplet diffusion is characterized by two distinctive components: fast intrachain, and slow interchain. At room temperature the interchain diffusion coefficients are found to be $D_a=0.89\cdot10^{-2}$ cm$^2$s$^{-1}$ and $D_b=1.49\cdot10^{-2}$ cm$^2$s$^{-1}$ along the respective $\bar{a}$- and $\bar{b}$-axes, and the intrachain is $D_c=3.03$ cm$^2$s$^{-1}$ along the fast $\bar{c}$-axis. The exceptionally high exciton mobility along the $π$-conjugated backbone facilitates rapid triplet migration over long distances. Our results can be utilized in the design of efficient energy conversion and light-emitting devices with desired solid-state properties. △ Less

Submitted 28 October, 2019; v1 submitted 16 July, 2019; originally announced July 2019.

Comments: Final version after corrections and improvements

Journal ref: J. Phys. Chem. C 123, 44, 26831-26841 (2019)

Rabi oscillations in a superconducting nanowire circuit

Authors: Yannick Schön, Jan Nicolas Voss, Micha Wildermuth, Andre Schneider, Sebastian T. Skacel, Martin P. Weides, Jared H. Cole, Hannes Rotzinger, Alexey V. Ustinov

Abstract: We investigate the circuit quantum electrodynamics of anharmonic superconducting nanowire oscillators. The sample circuit consists of a capacitively shunted nanowire with a width of about 20 nm and a varying length up to 350 nm, capacitively coupled to an on-chip resonator. By applying microwave pulses we observe Rabi oscillations, measure coherence times and the anharmonicity of the circuit. Desp… ▽ More We investigate the circuit quantum electrodynamics of anharmonic superconducting nanowire oscillators. The sample circuit consists of a capacitively shunted nanowire with a width of about 20 nm and a varying length up to 350 nm, capacitively coupled to an on-chip resonator. By applying microwave pulses we observe Rabi oscillations, measure coherence times and the anharmonicity of the circuit. Despite the very compact design, simple top-down fabrication and high degree of disorder in the oxidized (granular) aluminum material used, we observe lifetimes in the microsecond range. △ Less

Submitted 16 March, 2020; v1 submitted 9 July, 2019; originally announced July 2019.

The effect of atomic structure on the electrical response of aluminium oxide tunnel junctions

Authors: M. J. Cyster, J. S. Smith, J. A. Vaitkus, N. Vogt, S. P. Russo, J. H. Cole

Abstract: Many nanoelectronic devices rely on thin dielectric barriers through which electrons tunnel. For instance, aluminium oxide barriers are used as Josephson junctions in superconducting electronics. The reproducibility and drift of circuit parameters in these junctions are affected by the uniformity, morphology, and composition of the oxide barriers. To improve these circuits the effect of the atomic… ▽ More Many nanoelectronic devices rely on thin dielectric barriers through which electrons tunnel. For instance, aluminium oxide barriers are used as Josephson junctions in superconducting electronics. The reproducibility and drift of circuit parameters in these junctions are affected by the uniformity, morphology, and composition of the oxide barriers. To improve these circuits the effect of the atomic structure on the electrical response of aluminium oxide barriers must be understood. We create three-dimensional atomistic models of aluminium oxide tunnel junctions and simulate their electronic transport properties with the non-equilibrium Green's function formalism. Increasing the oxide density is found to produce an exponential increase in the junction resistance. In highly oxygen-deficient junctions we observe metallic channels which decrease the resistance significantly. Computing the charge and current density within the junction shows how variation in the local potential landscape can create channels which dominate conduction. An atomistic approach provides a better understanding of these transport processes and guides the design of junctions for nanoelectronics applications. △ Less

Submitted 29 May, 2019; originally announced May 2019.

Comments: 10 pages, 9 figures

Journal ref: Phys. Rev. Research 2, 013110 (2020)

Probing charge carrier movement in organic semiconductor thin films via nanowire conductance spectroscopy

Authors: M. V. Klymenko, J. A. Vaitkus, J. H. Cole

Abstract: Understanding the movement of charge within organic semiconducting films is crucial for applications in photo-voltaics and flexible electronics. We study the sensitivity of the electrical conductance of a silicon nanowire to changes of charge states within an organic semiconductor physisorbed on the surface of the nanowire. Elastic scattering caused by motion of charge carriers near the nanowire m… ▽ More Understanding the movement of charge within organic semiconducting films is crucial for applications in photo-voltaics and flexible electronics. We study the sensitivity of the electrical conductance of a silicon nanowire to changes of charge states within an organic semiconductor physisorbed on the surface of the nanowire. Elastic scattering caused by motion of charge carriers near the nanowire modifies the mean-free path for backscattering of electrons propagating within it, which we have mathematically expressed in terms of the causal Green's functions. The scattering potential has been computed using a combination of the polarizable continuum model and density functional theory with the range-separated exchange-correlation functional for organic molecules and the semi-empirical tight-binding model for silicon. As an example, the sensitivity to charge state changes in tetracene is computed as a function of operating temperature and geometrical parameters of a nanowire. For a single molecule, ultra-thin silicon nanowires with characteristic sizes of the cross-section below 2 nm produce a detectable conductance change at room temperature. For larger nanowires the sensitivity is reduced, however the conductance change grows with the number of charged molecules: with sub-4 nm nanowires being sensitive enough to detect several tens of charge carriers. We propose using noise spectroscopy to access the temporal evolution of the charge states. Information regarding the spatial distribution of charge carries in organic thin films can be obtained using a grid of nanowire resistors and electric impedance tomography. △ Less

Submitted 17 May, 2019; originally announced May 2019.

Spin coherent quantum transport of electrons between defects in diamond

Authors: Lachlan M Oberg, Eric Huang, Prithvi M Reddy, Audrius Alkauskas, Andrew D Greentree, Jared H Cole, Neil B Manson, Carlos A Meriles, Marcus W Doherty

Abstract: The nitrogen-vacancy color center in diamond has rapidly emerged as an important solid-state system for quantum information processing. While individual spin registers have been used to implement small-scale diamond quantum computing, the realization of a large-scale device requires development of an on-chip quantum bus for transporting information between distant qubits. Here we propose a method… ▽ More The nitrogen-vacancy color center in diamond has rapidly emerged as an important solid-state system for quantum information processing. While individual spin registers have been used to implement small-scale diamond quantum computing, the realization of a large-scale device requires development of an on-chip quantum bus for transporting information between distant qubits. Here we propose a method for coherent quantum transport of an electron and its spin state between distant NV centers. Transport is achieved by the implementation of spatial stimulated adiabatic Raman passage through the optical control of the NV center charge states and the confined conduction states of a diamond nanostructure. Our models show that for two NV centers in a diamond nanowire, high fidelity transport can be achieved over distances of order hundreds of nanometres in timescales of order hundreds of nanoseconds. Spatial adiabatic passage is therefore a promising option for realizing an on-chip spin quantum bus. △ Less

Submitted 16 May, 2019; originally announced May 2019.

Linear response theory of Josephson junction arrays in a microwave cavity

Authors: Samuel A. Wilkinson, Jared H. Cole

Abstract: Recent experiments on Josephson junction arrays (JJAs) in microwave cavities have opened up a new avenue for investigating the properties of these devices while minimising the amount of external noise coming from the measurement apparatus itself. These experiments have already shown promise for probing many-body quantum effects in JJAs. In this work, we develop a general theoretical description of… ▽ More Recent experiments on Josephson junction arrays (JJAs) in microwave cavities have opened up a new avenue for investigating the properties of these devices while minimising the amount of external noise coming from the measurement apparatus itself. These experiments have already shown promise for probing many-body quantum effects in JJAs. In this work, we develop a general theoretical description of such experiments by deriving a quantum phase model for planar JJAs containing quantized vortices. The dynamical susceptibility of this model is calculated for some simple circuits, and signatures of the injection of additional vortices are identified. The effects of decoherence are considered via a Lindblad master equation. △ Less

Submitted 3 April, 2019; v1 submitted 2 November, 2018; originally announced November 2018.

Comments: 15 pages, 10 figures

Journal ref: Phys. Rev. B 99, 134502 (2019)

Magnetic-field-induced parity effect in insulating Josephson junction chains

Authors: Timothy Duty, Karin Cedergren, Sergey Kafanov, Roger Ackroyd, Jared H. Cole

Abstract: We report the experimental manifestation of even-odd parity effects in the transport characteristics of insulating Josephson junction chains which occur as the superconducting gap is suppressed by applied magnetic fields at millikelvin temperatures. The primary signature is a non-monotonic dependence of the critical voltage, $V_c$, for the onset of charge transport through the chain, with the pari… ▽ More We report the experimental manifestation of even-odd parity effects in the transport characteristics of insulating Josephson junction chains which occur as the superconducting gap is suppressed by applied magnetic fields at millikelvin temperatures. The primary signature is a non-monotonic dependence of the critical voltage, $V_c$, for the onset of charge transport through the chain, with the parity crossover indicated by a maximum of $V_c$ at the parity field $B^*$. We also observe a distinctive change in the transport characteristics across the parity transition, indicative of Cooper-pair dominated transport below $B^*$, giving way to single-electron dominated transport above $B^*$. For fields applied in the plane of the superconducting aluminum films, the parity effect is found to occur at the field, $B^*_{||}$, such that the superconducting gap equals the single-electron charging energy, $Δ(B^*_{||})=E_C$. On the contrary, the parity effect for perpendicularly applied fields can occur at relatively lower fields, $B^*_\perp\simeq 2Φ_0/A_I$, depending only on island area, $A_I$. Our results suggest a novel explanation for the insulating peak observed in disordered superconducting films and one-dimensional strips patterned from such films. △ Less

Submitted 1 September, 2018; v1 submitted 26 August, 2018; originally announced August 2018.

Comments: 10 pages including figures and supplemental material

The effects of thermal and correlated noise on magnons in a quantum ferromagnet

Authors: Jan Jeske, Ángel Rivas, Muhammad H. Ahmed, Miguel A. Martin-Delgado, Jared H. Cole

Abstract: The dynamics and thermal equilibrium of spin waves (magnons) in a quantum ferromagnet as well as the macroscopic magnetisation are investigated. Thermal noise due to an interaction with lattice phonons and the effects of spatial correlations in the noise are considered. We first present a Markovian master equation approach with analytical solutions for any homogeneous spatial correlation function… ▽ More The dynamics and thermal equilibrium of spin waves (magnons) in a quantum ferromagnet as well as the macroscopic magnetisation are investigated. Thermal noise due to an interaction with lattice phonons and the effects of spatial correlations in the noise are considered. We first present a Markovian master equation approach with analytical solutions for any homogeneous spatial correlation function of the noise. We find that spatially correlated noise increases the decay rate of magnons with low wave vectors to their thermal equilibrium, which also leads to a faster decay of the ferromagnet's magnetisation to its steady-state value. For long correlation lengths and higher temperature we find that additionally there is a component of the magnetisation which decays very slowly, due to a reduced decay rate of fast magnons. This effect could be useful for fast and noise-protected quantum or classical information transfer and magnonics. We further compare ferromagnetic and antiferromagnetic behaviour in noisy environments and find qualitatively similar behaviour in Ohmic but fundamentally different behaviour in super-Ohmic environments. △ Less

Submitted 5 November, 2018; v1 submitted 27 February, 2018; originally announced February 2018.

Journal ref: New J. Phys. 20 093017 (2018)

Optical vector network analysis of ultra-narrow transitions in $^{166}$Er$^{3+}$:$^7$LiYF$_4$

Authors: N. Kukharchyk, D. Sholokhov, O. Morozov, S. L. Korableva, J. H. Cole, A. A. Kalachev, P. A. Bushev

Abstract: We present optical vector network analysis (OVNA) of an isotopically purified $^{166}$Er$^{3+}$:$^7$LiYF$_4$ crystal. The OVNA method is based on generation and detection of modulated optical sideband by using a radio-frequency vector network analyzer. This technique is widely used in the field of microwave photonics for the characterization of optical responses of optical devices such as filters… ▽ More We present optical vector network analysis (OVNA) of an isotopically purified $^{166}$Er$^{3+}$:$^7$LiYF$_4$ crystal. The OVNA method is based on generation and detection of modulated optical sideband by using a radio-frequency vector network analyzer. This technique is widely used in the field of microwave photonics for the characterization of optical responses of optical devices such as filters and high-Q resonators. However, dense solid-state atomic ensembles induce a large phase shift on one of the optical sidebands which results in the appearance of extra features on the measured transmission response. We present a simple theoretical model which accurately describes the observed spectra and helps to reconstruct the absorption profile of a solid-state atomic ensemble as well as corresponding change of the refractive index in the vicinity of atomic resonances. △ Less

Submitted 1 January, 2018; originally announced January 2018.

Comments: 4 pages, 5 figures

Journal ref: Optics Lett. 43, 935 (2018)

Büttiker probes and the Recursive Green's Function; an efficient approach to include dissipation in general configurations

Authors: Jesse A. Vaitkus, Jared H. Cole

Abstract: An efficient and compact approach to the inclusion of dissipative effects in Non-Equilibrium Green's Function (NEGF) simulations of electronic systems is introduced. The algorithm is based on two well known methods in the literature, firstly that of the so-called Recursive Green's Function (RGF) and secondly that of Büttiker probes. Numerical methods for exact evaluation of the Jacobian are presen… ▽ More An efficient and compact approach to the inclusion of dissipative effects in Non-Equilibrium Green's Function (NEGF) simulations of electronic systems is introduced. The algorithm is based on two well known methods in the literature, firstly that of the so-called Recursive Green's Function (RGF) and secondly that of Büttiker probes. Numerical methods for exact evaluation of the Jacobian are presented by a direct extension to RGF which can be modularly included in any codebase that uses it presently. Then using both physical observations and numerical methods, the computation time of the Büttiker probe Jacobian is improved significantly. An improvement to existing phonon models within Büttiker probes is then demonstrated in the simulation of fully atomistic graphene nanoribbon based field effect transistors in n-i-n and p-i-n operation. △ Less

Submitted 19 December, 2017; originally announced December 2017.

Comments: 13 pages, 7 figures

Journal ref: Phys. Rev. B 97, 085149 (2018)

Breaking time-reversal symmetry with a superconducting flux capacitor

Authors: Clemens Müller, Shengwei Guan, Nicolas Vogt, Jared H. Cole, Thomas M. Stace

Abstract: We present the design of a passive, on-chip microwave circulator based on a ring of superconducting tunnel junctions. We investigate two distinct physical realisations, based on either Josephson junctions (JJ) or quantum phase slip elements (QPS), with microwave ports coupled either capacitively (JJ) or inductively (QPS) to the ring structure. A constant bias applied to the center of the ring prov… ▽ More We present the design of a passive, on-chip microwave circulator based on a ring of superconducting tunnel junctions. We investigate two distinct physical realisations, based on either Josephson junctions (JJ) or quantum phase slip elements (QPS), with microwave ports coupled either capacitively (JJ) or inductively (QPS) to the ring structure. A constant bias applied to the center of the ring provides the symmetry breaking (effective) magnetic field, and no microwave or rf bias is required. We find that this design offers high isolation even when taking into account fabrication imperfections and environmentally induced bias perturbations and find a bandwidth in excess of 500 MHz for realistic device parameters. △ Less

Submitted 25 May, 2018; v1 submitted 28 September, 2017; originally announced September 2017.

Comments: 10 pages, 11 figures, including supplementary material - published as "Passive on-chip, superconducting circulator using rings of tunnel junctions"

Journal ref: Phys. Rev. Lett. 120, 213602 (2018)

Towards understanding two-level-systems in amorphous solids -- Insights from quantum circuits

Authors: Clemens Müller, Jared H. Cole, Jürgen Lisenfeld

Abstract: Amorphous solids show surprisingly universal behaviour at low temperatures. The prevailing wisdom is that this can be explained by the existence of two-state defects within the material. The so-called standard tunneling model has become the established framework to explain these results, yet it still leaves the central question essentially unanswered -- what are these two-level defects? This quest… ▽ More Amorphous solids show surprisingly universal behaviour at low temperatures. The prevailing wisdom is that this can be explained by the existence of two-state defects within the material. The so-called standard tunneling model has become the established framework to explain these results, yet it still leaves the central question essentially unanswered -- what are these two-level defects? This question has recently taken on a new urgency with the rise of superconducting circuits in quantum computing, circuit quantum electrodynamics, magnetometry, electrometry and metrology. Superconducting circuits made from aluminium or niobium are fundamentally limited by losses due to two-level defects within the amorphous oxide layers encasing them. On the other hand, these circuits also provide a novel and effective method for studying the very defects which limit their operation. We can now go beyond ensemble measurements and probe individual defects -- observing the quantum nature of their dynamics and studying their formation, their behaviour as a function of applied field, strain, temperature and other properties. This article reviews the plethora of recent experimental results in this area and discusses the various theoretical models which have been used to describe the observations. In doing so, it summarises the current approaches to solving this fundamentally important problem in solid-state physics. △ Less

Submitted 10 October, 2019; v1 submitted 2 May, 2017; originally announced May 2017.

Comments: 34 pages, 7 figures, 1 table

Journal ref: Rep. Prog. Phys. 82, 124501 (2019)

Coulomb drag and depinning in bilinear Josephson junction arrays

Authors: Samuel A. Wilkinson, Nicolas Vogt, Jared H. Cole

Abstract: Coulomb drag and depinning are electronic transport phenomena that occur in low-dimensional nanostructures. Recently, both phenomena have been reported in bilinear Josephson junction arrays. These devices provide a unique opportunity to study the interplay of Coulomb drag and depinning in a system where all relevant parameters can be controlled experimentally. We explain the Coulomb drag and depin… ▽ More Coulomb drag and depinning are electronic transport phenomena that occur in low-dimensional nanostructures. Recently, both phenomena have been reported in bilinear Josephson junction arrays. These devices provide a unique opportunity to study the interplay of Coulomb drag and depinning in a system where all relevant parameters can be controlled experimentally. We explain the Coulomb drag and depinning characteristics in the I-V curve of the bilinear Josephson junction array by adopting a quasicharge model which has previously proven useful in describing threshold phenomena in linear Josephson junction arrays. Simulations are performed for a range of coupling strengths, where numerically obtained I-V curves match well with what has been previously observed experimentally. Analytic expressions for the ratio between the active and passive currents are derived from depinning arguments. Novel phenomena are predicted at voltages higher than those for which experimental results have been reported to date. △ Less

Submitted 1 June, 2017; v1 submitted 6 February, 2017; originally announced February 2017.

Comments: 6 pages, 4 figures

Ab initio calculation of energy levels for phosphorus donors in silicon

Authors: J. S. Smith, A. Budi, M. C. Per, N. Vogt, D. W. Drumm, L. C. L. Hollenberg, J. H. Cole, S. P. Russo

Abstract: The s manifold energy levels for phosphorus donors in silicon are important input parameters for the design and modelling of electronic devices on the nanoscale. In this paper we calculate these energy levels from first principles using density functional theory. The wavefunction of the donor electron's ground state is found to have a form that is similar to an atomic s orbital, with an effective… ▽ More The s manifold energy levels for phosphorus donors in silicon are important input parameters for the design and modelling of electronic devices on the nanoscale. In this paper we calculate these energy levels from first principles using density functional theory. The wavefunction of the donor electron's ground state is found to have a form that is similar to an atomic s orbital, with an effective Bohr radius of 1.8 nm. The corresponding binding energy of this state is found to be 41 meV, which is in good agreement with the currently accepted value of 45.59 meV. We also calculate the energies of the excited 1s(T) and 1s(E) states, finding them to be 32 and 31 meV respectively. These results constitute the first ab initio confirmation of the s manifold energy levels for phosphorus donors in silicon. △ Less

Submitted 2 December, 2016; originally announced December 2016.

Comments: 9 pages, 6 figures

Stimulated emission from NV centres in diamond

Authors: Jan Jeske, Desmond W. M. Lau, Liam P. McGuinness, Philip Reineck, Brett C. Johnson, Jeffrey C. McCallum, Fedor Jelezko, Thomas Volz, Jared H. Cole, Brant C. Gibson, Andrew D. Greentree

Abstract: Stimulated emission is the process fundamental to laser operation, thereby producing coherent photon output. Despite negatively-charged nitrogen-vacancy (NV$^-$) centres being discussed as a potential laser medium since the 1980's, there have been no definitive observations of stimulated emission from ensembles of NV$^-$ to date. Reasons for this lack of demonstration include the short excited sta… ▽ More Stimulated emission is the process fundamental to laser operation, thereby producing coherent photon output. Despite negatively-charged nitrogen-vacancy (NV$^-$) centres being discussed as a potential laser medium since the 1980's, there have been no definitive observations of stimulated emission from ensembles of NV$^-$ to date. Reasons for this lack of demonstration include the short excited state lifetime and the occurrence of photo-ionisation to the neutral charge state by light around the zero-phonon line. Here we show both theoretical and experimental evidence for stimulated emission from NV$^-$ states using light in the phonon-sidebands. Our system uses a continuous wave pump laser at 532 nm and a pulsed stimulating laser that is swept across the phononic sidebands of the NV$^-$. Optimal stimulated emission is demonstrated in the vicinity of the three-phonon line at 700 nm. Furthermore, we show the transition from stimulated emission to photoionisation as the stimulating laser wavelength is reduced from 700nm to 620 nm. While lasing at the zero-phonon line is suppressed by ionisation, our results open the possibility of diamond lasers based on NV centres, tuneable over the phonon-sideband. This broadens the applications of NV magnetometers from single centre nanoscale sensors to a new generation of ultra-precise ensemble laser sensors, which exploit the contrast and signal amplification of a lasing system. △ Less

Submitted 24 February, 2016; originally announced February 2016.

Depinning of disordered bosonic chains

Authors: Nicolas Vogt, Jared H. Cole, Alexander Shnirman

Abstract: We consider one-dimensional bosonic chains with a repulsive boson-boson interaction that decays exponentially on large length-scales. This model describes transport of Cooper-pairs in a Josepshon junction array, or transport of magnetic flux quanta in quantum-phase-slip ladders, i.e. arrays of superconducting wires in a ladder-configuration that allow for the coherent tunnelling of flux quanta. In… ▽ More We consider one-dimensional bosonic chains with a repulsive boson-boson interaction that decays exponentially on large length-scales. This model describes transport of Cooper-pairs in a Josepshon junction array, or transport of magnetic flux quanta in quantum-phase-slip ladders, i.e. arrays of superconducting wires in a ladder-configuration that allow for the coherent tunnelling of flux quanta. In the low-frequency, long wave-length regime these chains can be mapped to an effective model of a one-dimensional elastic field in a disordered potential. The onset of transport in these systems, when biased by external voltage, is described by the standard depinning theory of elastic media in disordered pinning potentials. We numerically study the regimes that are of relevance for quantum-phase-slip ladders. These are (i) very short chains and (ii) the regime of weak disorder. For chains shorter than the typical pinning length, i.e., the Larkin length, the chains reach a saturation regime where the depinning voltage does not depend on the decay length of the repulsive interaction. In the regime of weak disorder we find an emergent correlation length-scale that depends on the disorder strength. For arrays shorter than this length the onset of transport is similar to the clean arrays, i.e., is due to the penetration of solitons into the array. We discuss the depinning scenarios for longer arrays in this regime. △ Less

Submitted 5 October, 2015; originally announced October 2015.

Comments: 11 pages, 6 figures

A 3D investigation of delocalised oxygen two-level defects in Josephson junctions

Authors: Timothy C. DuBois, Salvy P. Russo, Jared H. Cole

Abstract: Environmental two-level systems (TLS) have been identified as significant decoherence sources in Josephson junction (JJ) based circuits. For such quantum devices to be functional, the removal or control of the TLS is a necessity. Understanding the microscopic origins of the 'strongly coupled' TLS type is one current path of investigation to that end. The delocalized oxygen model suggests the atomi… ▽ More Environmental two-level systems (TLS) have been identified as significant decoherence sources in Josephson junction (JJ) based circuits. For such quantum devices to be functional, the removal or control of the TLS is a necessity. Understanding the microscopic origins of the 'strongly coupled' TLS type is one current path of investigation to that end. The delocalized oxygen model suggests the atomic position of an oxygen atom is spatially delocalized in the oxide forming the JJ barrier. In this report we extend this model from its previous 2+1D construction to a complete 3D description using a Wick-rotated time-dependent Schrodinger equation to solve for time-independent solutions in three dimensions. We compute experimentally observable parameters for phase qubits and compare the results to the 2+1D framework. We devise a Voronoi classification scheme to investigate oxygen atoms delocalizing within strained and non-strained crystalline lattices, as well as realistic atomic positions a JJ amorphous tunnel barrier constructed in previous density functional studies. △ Less

Submitted 21 August, 2015; originally announced August 2015.

Comments: 9 Pages, 8 Figures

Microwave quantum optics as a direct probe of the Overhauser field in a quantum-dot CQED device

Authors: Pei-Qing Jin, Jan Jeske, Andrew D. Greentree, Jared H. Cole

Abstract: We show theoretically that a quantum-dot circuit quantum electrodynamics (CQED) device can be used as a probe of the Overhauser field in quantum dots. By coupling a transmission line to the interdot tunneling gate, an electromagnetically-induced-transparency (EIT) scheme can be established, whose Fano-type interference leads to a sharp curvature in the reflection spectrum around resonance. This sh… ▽ More We show theoretically that a quantum-dot circuit quantum electrodynamics (CQED) device can be used as a probe of the Overhauser field in quantum dots. By coupling a transmission line to the interdot tunneling gate, an electromagnetically-induced-transparency (EIT) scheme can be established, whose Fano-type interference leads to a sharp curvature in the reflection spectrum around resonance. This sharp feature persists even in the presence of the fluctuating spin bath, rendering a high-resolution method to extract the bath's statistical information. For strong nuclear spin fields, the reflection spectrum exhibits an Autler-Townes splitting, where the peak locations indicate the strengths of the Overhauser field gradient (OFG). △ Less

Submitted 26 July, 2015; originally announced July 2015.

Comments: 5 pages, 3 figures

Journal ref: Phys. Rev. B 103, 045301 (2021)

Charge filling factors in clean and disordered arrays of tunnel junctions

Authors: Kelly A. Walker, Nicolas Vogt, Jared H. Cole

Abstract: We simulate one-dimensional arrays of tunnel junctions using the kinetic Monte Carlo method to study charge filling behaviour in the large charging energy limit. By applying a small fixed voltage bias and varying the offset voltage, we investigate this behaviour in clean and disordered arrays (both weak and strong disorder effects). The offset voltage dependent modulation of the current is highly… ▽ More We simulate one-dimensional arrays of tunnel junctions using the kinetic Monte Carlo method to study charge filling behaviour in the large charging energy limit. By applying a small fixed voltage bias and varying the offset voltage, we investigate this behaviour in clean and disordered arrays (both weak and strong disorder effects). The offset voltage dependent modulation of the current is highly sensitive to background charge disorder and exhibits substantial variation depending on the strength of the disorder. We show that while small fractional charge filling factors are likely to be washed out in experimental devices due to strong background charge disorder, larger factors may be observable. △ Less

Submitted 13 January, 2016; v1 submitted 16 July, 2015; originally announced July 2015.

Comments: 9 pages, 7 figures

Journal ref: Sci. Rep. 5, 17572 (2015)