-
Calibrating a Finite-strain Phase-field Model of Fracture for Bonded Granular Materials with Uncertainty Quantification
Authors:
Abigail C. Schmid,
Erik Jensen,
Fabio Di Gioacchino,
Pooyan B. Javadzadeh,
Nate E. Peterson,
C. Gus Becker,
Hongbing Lu,
Fatemeh Pourahmadian,
Amy J. Clarke,
Alireza Doostan,
Richard A. Regueiro
Abstract:
To study the mechanical behavior of mock high explosives, an experimental and simulation program was developed to calibrate, with quantified uncertainty, a material model of the bonded granular material Idoxuridine and nitroplasticized Estane-5703. This paper reports on the efficacy of such a framework as a generalizable methodology for calibrating material models against experimental data with un…
▽ More
To study the mechanical behavior of mock high explosives, an experimental and simulation program was developed to calibrate, with quantified uncertainty, a material model of the bonded granular material Idoxuridine and nitroplasticized Estane-5703. This paper reports on the efficacy of such a framework as a generalizable methodology for calibrating material models against experimental data with uncertainty quantification. Additionally, this paper studies the effect of two manufacturing temperatures and three initial granular configurations on the unconfined compressive behavior of the resulting bonded granular materials. In each of these cases, the same calibration framework was used; in that, hundreds of high-fidelity direct numerical simulations using a new, GPU-enabled, high-performance finite element method software, Ratel, were run to calibrate a finite-strain phase-field fracture model against experimental data. It was found that manufacturing temperature influenced the elastic response of the mock high explosives, with higher temperatures yielding a stiffer response. By contrast, it was found that the initial configuration of the grains had a negligible impact on the overall behavior of the mock high explosives, though it remains possible that local damage accumulation within the specimens could be altered by the initial configurations. Overall, the calibration framework was successful at creating well-calibrated models, showing its usefulness as an engineering and scientific tool.
△ Less
Submitted 29 August, 2025;
originally announced September 2025.
-
Deep learning of phase transitions with minimal examples
Authors:
Ahmed Abuali,
David A. Clarke,
Morten Hjorth-Jensen,
Ioannis Konstantinidis,
Claudia Ratti,
Jianyi Yang
Abstract:
Over the past several years, there have been many studies demonstrating the ability of deep neural networks to identify phase transitions in many physical systems, notably in classical statistical physics systems. One often finds that the prediction of deep learning methods trained on many ensembles below and above the critical temperature $T_{\rm c}$ behaves similarly to an order parameter, and t…
▽ More
Over the past several years, there have been many studies demonstrating the ability of deep neural networks to identify phase transitions in many physical systems, notably in classical statistical physics systems. One often finds that the prediction of deep learning methods trained on many ensembles below and above the critical temperature $T_{\rm c}$ behaves similarly to an order parameter, and this analogy has been successfully used to locate $T_{\rm c}$ and estimate universal critical exponents. In this work, we pay particular attention to the ability of a convolutional neural network to capture these critical parameters for the 2-$d$ Ising model when the network is trained on configurations at $T=0$ and $T=\infty$ only. We directly compare its output to the same network trained at multiple temperatures below and above $T_{\rm c}$ to gain understanding of how this extreme restriction of training data can impact a neural network's ability to classify phases. We find that the network trained on two temperatures is still able to identify $T_{\rm c}$ and $ν$, while the extraction of $γ$ becomes more challenging.
△ Less
Submitted 22 August, 2025; v1 submitted 9 January, 2025;
originally announced January 2025.
-
Tuning the mechanical properties of organophilic clay dispersions: particle composition and preshear history effects
Authors:
Nikolaos A. Burger,
Benoit Loppinet,
Andrew Clarke,
George Petekidis
Abstract:
Clay minerals are abundant natural materials used widely in coatings, construction materials, ceramics, as well as being a component of drilling fluids. Here, we present the effect of steady and oscillatory preshear on organophilic modified clay gels in synthetic oil. Both platelet and needle-like particles are used as viscosifiers in drilling fluid formulations. For both particles the plateau mod…
▽ More
Clay minerals are abundant natural materials used widely in coatings, construction materials, ceramics, as well as being a component of drilling fluids. Here, we present the effect of steady and oscillatory preshear on organophilic modified clay gels in synthetic oil. Both platelet and needle-like particles are used as viscosifiers in drilling fluid formulations. For both particles the plateau modulus exhibits a similar concentration dependence, G_P ~ c^3.9, whereas the yield strain is γ_y ~ c^(-1) for the platelets and γ_y ~ c^-1.7 for the needles. Mixtures of the two follow an intermediate behavior: at low concentrations their elasticity and yield strain follows that of needle particles while at higher concentrations it exhibits a weaker power law dependence. Furthermore, upon varying the preshear history, the gel viscoelastic properties can be significantly tuned. At lower (higher) clay concentrations, preshear at specific oscillatory strain amplitudes or steady shear rates, may induce a hardening (softening) of the dispersions and, at all concentrations, a lowering of the shear strain. Hence, in needle dispersions preshear resulted in changes in the volume fraction dependence of the elastic modulus from G_P ~ c^3.9 to G_P ~ c^2.5 and of the yield strain from γ_y ~ c^-1.7 to γ_y ~ c^-1. However, small angle X-ray scattering showed not much structural changes, within the q-range covered. Our findings indicate ways to design colloidal organoclay dispersions with a mechanical response that can be tuned at will.
△ Less
Submitted 17 August, 2024;
originally announced August 2024.
-
The role of elastic instability on the self-assembly of particle chains in simple shear flow
Authors:
Matthew G. Smith,
Graham M. Gibson,
Andreas Link,
Anand Raghavan,
Andrew Clarke,
Thomas Franke,
Manlio Tassieri
Abstract:
Flow-Induced Self-Assembly (FISA) is the phenomena of particle chaining in viscoelastic fluids while experiencing shear flow. FISA has a large number of applications across many fields including material science, food processing and biomedical engineering. Nonetheless, this phenomena is currently not fully understood and little has been done in literature so far to investigate the possible effects…
▽ More
Flow-Induced Self-Assembly (FISA) is the phenomena of particle chaining in viscoelastic fluids while experiencing shear flow. FISA has a large number of applications across many fields including material science, food processing and biomedical engineering. Nonetheless, this phenomena is currently not fully understood and little has been done in literature so far to investigate the possible effects of the shear-induced elastic instability. In this work, a bespoke cone and plate shear cell is used to provide new insights on the FISA dynamics. In particular, we have fine tuned the applied shear rates to investigate the chaining phenomenon of micron-sized spherical particles suspended into a viscoelastic fluid characterised by a distinct onset of elastic instability. This has allowed us to reveal three phenomena never reported in literature before, i.e.: (I) the onset of the elastic instability is strongly correlated with an enhancement of FISA; (II) particle chains break apart when a constant shear is applied for `sufficiently' long-time (i.e. much longer than the fluids' longest relaxation time). This latter point correlates well with the outcomes of parallel superposition shear measurements, which (III) reveal a fading of the elastic component of the suspending fluid during continuous shear flows.
△ Less
Submitted 8 December, 2023; v1 submitted 17 March, 2023;
originally announced March 2023.
-
Morphological stability of solid-liquid interfaces under additive manufacturing conditions
Authors:
D. Tourret,
J. Klemm-Toole,
A. Eres Castellanos,
B. Rodgers,
G. Becker,
A. Saville,
B. Ellyson,
C. Johnson,
B. Milligan,
J. Copley,
R. Ochoa,
A. Polonsky,
K. Pusch,
M. P. Haines,
K. Fezzaa,
T. Sun,
K. Clarke,
S. Babu,
T. Pollock,
A. Karma,
A. Clarke
Abstract:
Understanding rapid solidification behavior at velocities relevant to additive manufacturing (AM) is critical to controlling microstructure selection. Although in-situ visualization of solidification dynamics is now possible, systematic studies under AM conditions with microstructural outcomes compared to solidification theory remain lacking. Here we measure solid-liquid interface velocities of Ni…
▽ More
Understanding rapid solidification behavior at velocities relevant to additive manufacturing (AM) is critical to controlling microstructure selection. Although in-situ visualization of solidification dynamics is now possible, systematic studies under AM conditions with microstructural outcomes compared to solidification theory remain lacking. Here we measure solid-liquid interface velocities of Ni-Mo-Al alloy single crystals under AM conditions with synchrotron X-ray imaging, characterize the microstructures, and show discrepancies with classical theories regarding the onset velocity for absolute stability of a planar solid-liquid interface. Experimental observations reveal cellular/dendritic microstructures can persist at velocities larger than the expected absolute stability limit, where banded structure formation should theoretically appear. We show that theory and experimental observations can be reconciled by properly accounting for the effect of solute trapping and kinetic undercooling on the velocity-dependent solidus and liquidus temperatures of the alloy. Further theoretical developments and accurate assessments of key thermophysical parameters - like liquid diffusivities, solid-liquid interface excess free energies, and kinetic coefficients - remain needed to quantitatively investigate such discrepancies and pave the way for the prediction and control of microstructure selection under rapid solidification conditions.
△ Less
Submitted 16 March, 2023;
originally announced March 2023.
-
The $μ(I)$ model and extensions applied to granular material in silo with inserts
Authors:
Samuel K Irvine,
Luke A Fullard,
Daniel J Holland,
Daniel A Clarke,
Thomasin A Lynch,
Pierre-Yves Lagrée
Abstract:
Granular material is often handled using silos with inserts in industrial processes to prevent "rat-holing" and similar behaviour, optimise mixing behaviour, and prevent segregation. We study the mass flow rate and the static zones of granular silos using the $μ(I)$ rheology in the incompressible Navier-Stokes equations. We also extend the $μ(I)$ model to incorporate pseudo-dilatancy and nonlocal…
▽ More
Granular material is often handled using silos with inserts in industrial processes to prevent "rat-holing" and similar behaviour, optimise mixing behaviour, and prevent segregation. We study the mass flow rate and the static zones of granular silos using the $μ(I)$ rheology in the incompressible Navier-Stokes equations. We also extend the $μ(I)$ model to incorporate pseudo-dilatancy and nonlocal fluidity. We find that insert shape has a significant effect on flow rate and static material. We also find that the effect of inserts on flow rate is not strongly affected by the extensions, while the amount of static material is highly dependent on the interactions between insert shape and extensions. Finally, we find that the effect on flow rate varies with insert size, while the amount of static material is not significantly affected by increasing insert size. These results could provide important insights for optimising silo design.
△ Less
Submitted 24 February, 2023;
originally announced February 2023.
-
Capturing the dynamics of a two orifice silo with the μ(I) model and extensions
Authors:
Samuel K Irvine,
Luke A Fullard,
Daniel J Holland,
Daniel A Clarke,
Thomasin A Lynch,
Pierre-Yves Lagrée
Abstract:
Granular material in a silo with two openings can display a `flow rate dip', where a non-monotonic relationship between flow rate and orifice separation occurs. In this paper we study continuum modelling of the silo with two openings. We find that the $μ(I)$ rheology can capture the flow rate dip if physically relevant friction parameters are used. We also extend the model by accounting for wall f…
▽ More
Granular material in a silo with two openings can display a `flow rate dip', where a non-monotonic relationship between flow rate and orifice separation occurs. In this paper we study continuum modelling of the silo with two openings. We find that the $μ(I)$ rheology can capture the flow rate dip if physically relevant friction parameters are used. We also extend the model by accounting for wall friction, dilatancy, and non-local effects. We find that accounting for the wall friction using a Hele-Shaw model better replicates the qualitative characteristics of the flow rate dip seen in experimental data, while dilatancy and non-local effects have very little effect on the qualitative characteristics of the mass flow rate dip. However, we find that all three of these factors have a significant impact on the mass flow rate, indicating that a continuum model which accurately predicts flow rate will need to account for these effects.
△ Less
Submitted 24 February, 2023; v1 submitted 4 October, 2022;
originally announced October 2022.
-
Microstructural Pattern Formation during Far-from-Equilibrium Alloy Solidification
Authors:
Kaihua Ji,
Elaheh Dorari,
Amy J. Clarke,
Alain Karma
Abstract:
We introduce a new phase-field formulation of rapid alloy solidification that quantitatively incorporates nonequilibrium effects at the solid-liquid interface over a very wide range of interface velocities. Simulations identify a new dynamical instability of dendrite tip growth driven by solute trapping at velocities approaching the absolute stability limit. They also reproduce the formation of th…
▽ More
We introduce a new phase-field formulation of rapid alloy solidification that quantitatively incorporates nonequilibrium effects at the solid-liquid interface over a very wide range of interface velocities. Simulations identify a new dynamical instability of dendrite tip growth driven by solute trapping at velocities approaching the absolute stability limit. They also reproduce the formation of the widely observed banded microstructures, revealing how this instability triggers transitions between dendritic and microsegregation-free solidification. Predicted band spacings agree quantitatively with observations in rapidly solidified Al-Cu thin films.
△ Less
Submitted 7 January, 2023; v1 submitted 22 September, 2022;
originally announced September 2022.
-
Spectrally-modified frequency-swept pulses for optically-driven quantum light sources
Authors:
G. R. Wilbur,
A. Binai-Motlagh,
A. Clarke,
A. Ramachandran,
N. Milson,
J. P. Healey,
S. O'Neal,
D. G. Deppe,
K. C. Hall
Abstract:
We present a driving scheme for solid-state quantum emitters using frequency-swept pulses containing a spectral hole resonant with the optical transition in the emitter. Our scheme enables high-fidelity state inversion, exhibits robustness to variations in the laser pulse parameters and is immune to phonon-mediated excitation-induced dephasing, benefits that derive from the the insensitivity of th…
▽ More
We present a driving scheme for solid-state quantum emitters using frequency-swept pulses containing a spectral hole resonant with the optical transition in the emitter. Our scheme enables high-fidelity state inversion, exhibits robustness to variations in the laser pulse parameters and is immune to phonon-mediated excitation-induced dephasing, benefits that derive from the the insensitivity of the adiabaticity condition to variations in the experimental parameters. Our resonant driving approach could be combined with spectral filtering of the scattered pump light and photonic devices for enhanced collection efficiency to realize simultaneous high indistinguishability and brightness in single photon source applications.
△ Less
Submitted 2 March, 2022;
originally announced March 2022.
-
Linear instability of shear thinning pressure driven channel flow
Authors:
Hugh J. Barlow,
Ewan J. Hemingway,
Andrew Clarke,
Suzanne M. Fielding
Abstract:
We study theoretically pressure driven planar channel flow of shear thinning viscoelastic fluids. Combining linear stability analysis and full nonlinear simulation, we study the instability of an initially one-dimensional base state to the growth of two-dimensional perturbations with wavevector in the flow direction. We do so within three widely used constitutive models: the microscopically motiva…
▽ More
We study theoretically pressure driven planar channel flow of shear thinning viscoelastic fluids. Combining linear stability analysis and full nonlinear simulation, we study the instability of an initially one-dimensional base state to the growth of two-dimensional perturbations with wavevector in the flow direction. We do so within three widely used constitutive models: the microscopically motivated Rolie-Poly model, and the phenomenological Johnson-Segalman and White-Metzner models. In each model, we find instability when the degree of shear thinning exceeds some level characterised by the logarithmic slope of the flow curve at its shallowest point. Specifically, we find instability for $n<n^*$, with $n^*\approx 0.21, 0.11$ and $0.30$ in the Rolie-Poly, Johnson-Segalman and White-Metzner models respectively. Within each model, we show that the critical pressure drop for the onset of instability obeys a criterion expressed in terms of this degree of shear thinning, $n$, together with the derivative of the first normal stress with respect to shear stress. Both shear thinning and rapid variations in first normal stress across the channel are therefore key ingredients driving the instability. In the Rolie-Poly and Johnson-Segalman models, the underlying mechanism appears to involve the destabilisation of a quasi-interface that exists in each half of the channel, across which the normal stress varies rapidly. In the White-Metzner model, no such quasi-interface exists, but the criterion for instability nonetheless appears to follow the same form as in the Rolie-Poly and Johnson-Segalman models. This presents an outstanding puzzle concerning any possibly generic nature of the instability mechanism. We finally make some briefly comments on the Giesekus model, which is rather different in its predictions from the other three.
△ Less
Submitted 7 August, 2019; v1 submitted 5 March, 2019;
originally announced March 2019.
-
Multiscale dendritic needle network model of alloy solidification with fluid flow
Authors:
D. Tourret,
M. M. Francois,
A. J. Clarke
Abstract:
We present a mathematical formulation of a multiscale model for solidification with convective flow in the liquid phase. The model is an extension of the dendritic needle network approach for crystal growth in a binary alloy. We propose a simple numerical implementation based on finite differences and step-wise approximations of parabolic dendritic branches of arbitrary orientation. Results of the…
▽ More
We present a mathematical formulation of a multiscale model for solidification with convective flow in the liquid phase. The model is an extension of the dendritic needle network approach for crystal growth in a binary alloy. We propose a simple numerical implementation based on finite differences and step-wise approximations of parabolic dendritic branches of arbitrary orientation. Results of the two-dimensional model are verified against reference benchmark solutions for steady, unsteady, and buoyant flow, as well as steady-state dendritic growth in the diffusive regime. Simulations of equiaxed growth under forced flow yield dendrite tip velocities within 10% of quantitative phase-field results from the literature. Finally, we perform illustrative simulations of polycrystalline solidification using physical parameters for an aluminum-10wt%copper alloy. Resulting microstructures show notable differences when taking into account natural buoyancy in comparison to a purely diffusive transport regime. The resulting model opens new avenues for computationally and quantitatively investigating the influence of fluid flow and gravity-induced buoyancy upon the selection of dendritic microstructures. Further ongoing developments include an equivalent formulation for directional solidification conditions and the implementation of the model in three dimensions, which is critical for quantitative comparison to experimental measurements.
△ Less
Submitted 16 April, 2019; v1 submitted 23 February, 2019;
originally announced February 2019.
-
Thickening of viscoelastic flow in a model porous medium
Authors:
E. J. Hemingway,
A. Clarke,
J. R. A. Pearson,
S. M. Fielding
Abstract:
We study numerically two-dimensional creeping viscoelastic flow past a biperiodic square array of cylinders within the Oldroyd B, FENE-CR and FENE-P constitutive models of dilute polymer solutions. Our results capture the initial mild decrease then dramatic upturn ('thickening') seen experimentally in the drag coefficient as a function of increasing Weissenberg number. By systematically varying th…
▽ More
We study numerically two-dimensional creeping viscoelastic flow past a biperiodic square array of cylinders within the Oldroyd B, FENE-CR and FENE-P constitutive models of dilute polymer solutions. Our results capture the initial mild decrease then dramatic upturn ('thickening') seen experimentally in the drag coefficient as a function of increasing Weissenberg number. By systematically varying the porosity of the flow geometry, we demonstrate two qualitatively different mechanisms underpinning this thickening effect: one that operates in the highly porous case of widely spaced obstacles, and another for more densely packed obstacles, with a crossover between these two mechanisms at intermediate porosities. We also briefly consider 2D creeping viscoelastic flow past a linear array of cylinders confined to a channel, where we find that the flow is steady for all Weissenberg numbers explored.
△ Less
Submitted 29 November, 2017; v1 submitted 16 January, 2017;
originally announced January 2017.
