-
Localized quasiparticles in a fluxonium with quasi-two-dimensional amorphous kinetic inductors
Authors:
Trevyn F. Q. Larson,
Sarah Garcia Jones,
Tamás Kalmár,
Pablo Aramburu Sanchez,
Sai Pavan Chitta,
Varun Verma,
Kristen Genter,
Katarina Cicak,
Sae Woo Nam,
Gergő Fülöp,
Jens Koch,
Ray W. Simmonds,
András Gyenis
Abstract:
Disordered superconducting materials with high kinetic inductance are an important resource to generate nonlinearity in quantum circuits and create high-impedance environments. In thin films fabricated from these materials, the combination of disorder and the low effective dimensionality leads to increased order parameter fluctuations and enhanced kinetic inductance values. Among the challenges of…
▽ More
Disordered superconducting materials with high kinetic inductance are an important resource to generate nonlinearity in quantum circuits and create high-impedance environments. In thin films fabricated from these materials, the combination of disorder and the low effective dimensionality leads to increased order parameter fluctuations and enhanced kinetic inductance values. Among the challenges of harnessing these compounds in coherent devices are their proximity to the superconductor-insulator phase transition, the presence of broken Cooper pairs, and the two-level systems located in the disordered structure. In this work, we fabricate tungsten silicide wires from quasi-two-dimensional films with one spatial dimension smaller than the superconducting coherence length and embed them into microwave resonators and fluxonium qubits, where the kinetic inductance provides the inductive part of the circuits. We study the dependence of loss on the frequency, disorder, and geometry of the device, and find that the loss increases with the level of disorder and is dominated by the localized quasiparticles trapped in the spatial variations of the superconducting gap.
△ Less
Submitted 10 April, 2025;
originally announced April 2025.
-
Low-Temperature Collective Transport and Dynamics in Charge Density Wave Conductor Niobium Triselenide
Authors:
Katarina Cicak
Abstract:
We investigated low-temperature dynamics in a charge density wave (CDW) conductor NbSe3, a widely studied representative of a class of systems of driven periodic media with quenched disorder and relevant to a wider group of systems exhibiting collective transport behaviors. To date, theoretical efforts have not converged to produce a consistent description of the rich dynamics observed in these sy…
▽ More
We investigated low-temperature dynamics in a charge density wave (CDW) conductor NbSe3, a widely studied representative of a class of systems of driven periodic media with quenched disorder and relevant to a wider group of systems exhibiting collective transport behaviors. To date, theoretical efforts have not converged to produce a consistent description of the rich dynamics observed in these systems, especially in the low temperature regime. We developed modern sample preparation techniques and used frequency- and time-domain transport measurements below the second characteristic Peierls CDW transition to investigate the regime of temporally-ordered collective creep in NbSe3 samples in the low temperature regime between 15 K and 32 K. By measuring the frequency of coherent oscillations between two characteristic threshold fields, ET and ET*, we show that in nine high-quality samples, pure, Ta-, or Ti-doped, the current-field relation for the collective transport in this regime closely follows a modified Anderson-Kim form across five orders of magnitude with thermally- and field-activated behavior above ET for a range of temperatures. This study, combined with our transport relaxation measurements, provides relevant length, energy, and time scales that set the dynamics in this regime and reveals that the collective dynamics, governed by large length and energy scales, must be reconciled with microscopic local dynamics, with barriers at orders of magnitude smaller scales. The interplay between the collective and local mechanisms set the dynamics that is responsible for extremely slow (creep-like) collective, yet temporally-ordered behavior. Combined with the existing work, our results paint a consistent picture of a transport phase diagram for CDWs, and density-wave systems in general, and provide essential ingredients for a much-needed correct theoretical description of these systems.
△ Less
Submitted 9 February, 2021;
originally announced February 2021.
-
Optical probing of mechanical loss of a Si_{3}N_{4} membrane below 100 mK
Authors:
R. Fischer,
N. S. Kampel,
G. G. T. Assumpção,
P. -L. Yu,
K. Cicak,
R. W. Peterson,
R. W. Simmonds,
C. A. Regal
Abstract:
We report on low mechanical loss in a high-stress silicon nitride (Si_{3}N_{4}) membrane at temperatures below 100 mK. We isolate a membrane via a phononic shield formed within a supporting silicon frame, and measure the mechanical quality factor of a number of high-tension membrane modes as we vary our dilution refrigerator base temperature between 35 mK and 5 K. At the lowest temperatures, we ob…
▽ More
We report on low mechanical loss in a high-stress silicon nitride (Si_{3}N_{4}) membrane at temperatures below 100 mK. We isolate a membrane via a phononic shield formed within a supporting silicon frame, and measure the mechanical quality factor of a number of high-tension membrane modes as we vary our dilution refrigerator base temperature between 35 mK and 5 K. At the lowest temperatures, we obtain a maximum quality factor (Q) of 2.3\times10^{8}, corresponding to a Q-frequency product (QFP) of 3.7\times10^{14} Hz. These measurements complement the recent observation of improved quality factors of Si_{3}N_{4} at ultralow temperatures via electrical detection. We also observe a dependence of the quality factor on optical heating of the device. By combining exceptional material properties, high tension, advanced isolation and clamping techniques, high-stress mechanical objects are poised to explore a new regime of exceptional quality factors. Such quality factors combined with an optical probe at cryogenic temperatures will have a direct impact on resonators as quantum objects, as well as force sensors at mK temperatures.
△ Less
Submitted 3 November, 2016;
originally announced November 2016.
-
A phononic bandgap shield for high-Q membrane microresonators
Authors:
P. -L. Yu,
K. Cicak,
N. S. Kampel,
Y. Tsaturyan,
T. P. Purdy,
R. W. Simmonds,
C. A. Regal
Abstract:
A phononic crystal can control the acoustic coupling between a resonator and its support structure. We micromachine a phononic bandgap shield for high Q silicon nitride membranes and study the driven displacement spectra of the membranes and their support structures. We find that inside observed bandgaps the density and amplitude of non-membrane modes are greatly suppressed, and membrane modes are…
▽ More
A phononic crystal can control the acoustic coupling between a resonator and its support structure. We micromachine a phononic bandgap shield for high Q silicon nitride membranes and study the driven displacement spectra of the membranes and their support structures. We find that inside observed bandgaps the density and amplitude of non-membrane modes are greatly suppressed, and membrane modes are shielded from an external mechanical drive by up to 30 dB.
△ Less
Submitted 3 December, 2013;
originally announced December 2013.
-
Bidirectional and efficient conversion between microwave and optical light
Authors:
R. W. Andrews,
R. W. Peterson,
T. P. Purdy,
K. Cicak,
R. W. Simmonds,
C. A. Regal,
K. W. Lehnert
Abstract:
Converting low-frequency electrical signals into much higher frequency optical signals has enabled modern communications networks to leverage both the strengths of microfabricated electrical circuits and optical fiber transmission, allowing information networks to grow in size and complexity. A microwave-to-optical converter in a quantum information network could provide similar gains by linking q…
▽ More
Converting low-frequency electrical signals into much higher frequency optical signals has enabled modern communications networks to leverage both the strengths of microfabricated electrical circuits and optical fiber transmission, allowing information networks to grow in size and complexity. A microwave-to-optical converter in a quantum information network could provide similar gains by linking quantum processors via low-loss optical fibers and enabling a large-scale quantum network. However, no current technology can convert low-frequency microwave signals into high-frequency optical signals while preserving their fragile quantum state. For this demanding application, a converter must provide a near-unitary transformation between different frequencies; that is, the ideal transformation is reversible, coherent, and lossless. Here we demonstrate a converter that reversibly, coherently, and efficiently links the microwave and optical portions of the electromagnetic spectrum. We use our converter to transfer classical signals between microwave and optical light with conversion efficiencies of ~10%, and achieve performance sufficient to transfer quantum states if the device were further precooled from its current 4 kelvin operating temperature to below 40 millikelvin. The converter uses a mechanically compliant membrane to interface optical light with superconducting microwave circuitry, and this unique combination of technologies may provide a way to link distant nodes of a quantum information network.
△ Less
Submitted 11 August, 2014; v1 submitted 19 October, 2013;
originally announced October 2013.
-
Tunable coupling to a mechanical oscillator circuit using a coherent feedback network
Authors:
Joseph Kerckhoff,
Reed W. Andrews,
H. S. Ku,
William F. Kindel,
Katarina Cicak,
Raymond W. Simmonds,
K. W. Lehnert
Abstract:
We demonstrate a fully cryogenic microwave feedback network composed of modular superconducting devices connected by transmission lines and designed to control a mechanical oscillator coupled to one of the devices. The network features an electromechanical device and a tunable controller that coherently receives, processes and feeds back continuous microwave signals that modify the dynamics and re…
▽ More
We demonstrate a fully cryogenic microwave feedback network composed of modular superconducting devices connected by transmission lines and designed to control a mechanical oscillator coupled to one of the devices. The network features an electromechanical device and a tunable controller that coherently receives, processes and feeds back continuous microwave signals that modify the dynamics and readout of the mechanical state. While previous electromechanical systems represent some compromise between efficient control and efficient readout of the mechanical state, as set by the electromagnetic decay rate, the tunable controller produces a closed-loop network that can be dynamically and continuously tuned between both extremes much faster than the mechanical response time. We demonstrate that the microwave decay rate may be modulated by at least a factor of 10 at a rate greater than $10^4$ times the mechanical response rate. The system is easy to build and suggests that some useful functions may arise most naturally at the network-level of modular, quantum electromagnetic devices.
△ Less
Submitted 7 June, 2013; v1 submitted 8 November, 2012;
originally announced November 2012.
-
Dynamical Autler-Townes control of a phase qubit
Authors:
Jian Li,
G. S. Paraoanu,
Katarina Cicak,
Fabio Altomare,
Jae I. Park,
Raymond W. Simmonds,
Mika A. Sillanpaa,
Pertti J. Hakonen
Abstract:
Routers, switches, and repeaters are essential components of modern information-processing systems. Similar devices will be needed in future superconducting quantum computers. In this work we investigate experimentally the time evolution of Autler-Townes splitting in a superconducting phase qubit under the application of a control tone resonantly coupled to the second transition. A three-level mod…
▽ More
Routers, switches, and repeaters are essential components of modern information-processing systems. Similar devices will be needed in future superconducting quantum computers. In this work we investigate experimentally the time evolution of Autler-Townes splitting in a superconducting phase qubit under the application of a control tone resonantly coupled to the second transition. A three-level model that includes independently determined parameters for relaxation and dephasing gives excellent agreement with the experiment. The results demonstrate that the qubit can be used as a ON/OFF switch with 100 ns operating time-scale for the reflection/transmission of photons coming from an applied probe microwave tone. The ON state is realized when the control tone is sufficiently strong to generate an Autler-Townes doublet, suppressing the absorption of the probe tone photons and resulting in a maximum of transmission.
△ Less
Submitted 11 December, 2012; v1 submitted 14 March, 2011;
originally announced March 2011.
-
Decoherence, Autler-Townes effect, and dark states in two-tone driving of a three-level superconducting system
Authors:
Jian Li,
G. S. Paraoanu,
Katarina Cicak,
Fabio Altomare,
Jae I. Park,
Raymond W. Simmonds,
Mika A. Sillanpaa,
Pertti J. Hakonen
Abstract:
We present a detailed theoretical analysis of a multi-level quantum system coupled to two radiation fields and subject to decoherence. We concentrate on an effect known from quantum optics as the Autler-Townes splitting, which has been recently demonstrated experimentally [M. A. Sillanpaa et al., Phys. Rev. Lett. 103, 193601 (2009)] in a superconducting phase qubit. In the three-level approximatio…
▽ More
We present a detailed theoretical analysis of a multi-level quantum system coupled to two radiation fields and subject to decoherence. We concentrate on an effect known from quantum optics as the Autler-Townes splitting, which has been recently demonstrated experimentally [M. A. Sillanpaa et al., Phys. Rev. Lett. 103, 193601 (2009)] in a superconducting phase qubit. In the three-level approximation, we derive analytical solutions and describe how they can be used to extract the decoherence rates and to account for the measurement data. Better agreement with the experiment can be obtained by extending this model to five levels. Finally, we investigate the stationary states created in the experiment and show that their structure is close to that of dark states.
△ Less
Submitted 13 October, 2011; v1 submitted 11 March, 2011;
originally announced March 2011.
-
Circuit cavity electromechanics in the strong coupling regime
Authors:
J. D. Teufel,
D. Li,
M. S. Allman,
K. Cicak,
A. J. Sirois,
J. D. Whittaker,
R. W. Simmonds
Abstract:
Demonstrating and exploiting the quantum nature of larger, more macroscopic mechanical objects would help us to directly investigate the limitations of quantum-based measurements and quantum information protocols, as well as test long standing questions about macroscopic quantum coherence. The field of cavity opto- and electro-mechanics, in which a mechanical oscillator is parametrically coupled t…
▽ More
Demonstrating and exploiting the quantum nature of larger, more macroscopic mechanical objects would help us to directly investigate the limitations of quantum-based measurements and quantum information protocols, as well as test long standing questions about macroscopic quantum coherence. The field of cavity opto- and electro-mechanics, in which a mechanical oscillator is parametrically coupled to an electromagnetic resonance, provides a practical architecture for the manipulation and detection of motion at the quantum level. Reaching this quantum level requires strong coupling, interaction timescales between the two systems that are faster than the time it takes for energy to be dissipated. By incorporating a free-standing, flexible aluminum membrane into a lumped-element superconducting resonant cavity, we have increased the single photon coupling strength between radio-frequency mechanical motion and resonant microwave photons by more than two orders of magnitude beyond the current state-of-the-art. A parametric drive tone at the difference frequency between the two resonant systems dramatically increases the overall coupling strength. This has allowed us to completely enter the strong coupling regime. This is evidenced by a maximum normal mode splitting of nearly six bare cavity line-widths. Spectroscopic measurements of these 'dressed states' are in excellent quantitative agreement with recent theoretical predictions. The basic architecture presented here provides a feasible path to ground-state cooling and subsequent coherent control and measurement of the quantum states of mechanical motion.
△ Less
Submitted 12 November, 2010;
originally announced November 2010.
-
Time-Domain Detection of Weakly Coupled TLS Fluctuators in Phase Qubits
Authors:
M. S. Allman,
F. Altomare,
J. D. Whittaker,
K. Cicak,
D. Li,
A. Sirois,
J. Strong,
J. D. Teufel,
R. W. Simmonds
Abstract:
We report on a method for detecting weakly coupled spurious two-level system fluctuators (TLSs) in superconducting qubits. This method is more sensitive that standard spectroscopic techniques for locating TLSs with a reduced data acquisition time.
We report on a method for detecting weakly coupled spurious two-level system fluctuators (TLSs) in superconducting qubits. This method is more sensitive that standard spectroscopic techniques for locating TLSs with a reduced data acquisition time.
△ Less
Submitted 15 April, 2010;
originally announced April 2010.
-
Tripartite interactions between two phase qubits and a resonant cavity
Authors:
F. Altomare,
J. I. Park,
K. Cicak,
M. A. Sillanpää,
MS. Allman,
D. Li,
A. Sirois,
J. A. Strong,
J. D. Whittaker,
R. W. Simmonds
Abstract:
The creation and manipulation of multipartite entangled states is important for advancements in quantum computation and communication, and for testing our fundamental understanding of quantum mechanics and precision measurements. Multipartite entanglement has been achieved by use of various forms of quantum bits (qubits), such as trapped ions, photons, and atoms passing through microwave cavities.…
▽ More
The creation and manipulation of multipartite entangled states is important for advancements in quantum computation and communication, and for testing our fundamental understanding of quantum mechanics and precision measurements. Multipartite entanglement has been achieved by use of various forms of quantum bits (qubits), such as trapped ions, photons, and atoms passing through microwave cavities. Quantum systems based on superconducting circuits have been used to control pair-wise interactions of qubits, either directly, through a quantum bus, or via controllable coupling. Here, we describe the first demonstration of coherent interactions of three directly coupled superconducting quantum systems, two phase qubits and a resonant cavity. We introduce a simple Bloch-sphere-like representation to help one visualize the unitary evolution of this tripartite system as it shares a single microwave photon. With careful control and timing of the initial conditions, this leads to a protocol for creating a rich variety of entangled states. Experimentally, we provide evidence for the deterministic evolution from a simple product state, through a tripartite W-state, into a bipartite Bell-state. These experiments are another step towards deterministically generating multipartite entanglement in superconducting systems with more than two qubits.
△ Less
Submitted 31 March, 2010;
originally announced April 2010.
-
Measurement crosstalk between two phase qubits coupled by a coplanar waveguide
Authors:
Fabio Altomare,
Katarina Cicak,
Mika A. Sillanpää,
Michael S. Allman,
Adam J. Sirois,
Dale Li,
Jae I. Park,
Joshua A. Strong,
John D. Teufel,
Jed D. Whittaker,
Raymond W. Simmonds
Abstract:
We analyze the measurement crosstalk between two flux-biased phase qubits coupled by a resonant coplanar waveguide cavity. After the first qubit is measured, the superconducting phase can undergo damped oscillations resulting in an a.c. voltage that produces a frequency chirped noise signal whose frequency crosses that of the cavity. We show experimentally that the coplanar waveguide cavity acts…
▽ More
We analyze the measurement crosstalk between two flux-biased phase qubits coupled by a resonant coplanar waveguide cavity. After the first qubit is measured, the superconducting phase can undergo damped oscillations resulting in an a.c. voltage that produces a frequency chirped noise signal whose frequency crosses that of the cavity. We show experimentally that the coplanar waveguide cavity acts as a bandpass filter that can significantly reduce the crosstalk signal seen by the second qubit when its frequency is far from the cavity's resonant frequency. We present a simple classical description of the qubit behavior that agrees well with the experimental data. These results suggest that measurement crosstalk between superconducting phase qubits can be reduced by use of linear or possibly nonlinear resonant cavities as coupling elements.
△ Less
Submitted 2 February, 2010;
originally announced February 2010.
-
RFSQUID-Mediated Coherent Tunable Coupling Between a Superconducting Phase Qubit and a Lumped Element Resonator
Authors:
M. S. Allman,
F. Altomare,
J. D. Whittaker,
K. Cicak,
D. Li,
A. Sirois,
J. Strong,
J. D. Teufel,
R. W. Simmonds
Abstract:
We demonstrate coherent tunable coupling between a superconducting phase qubit and a lumped element resonator. The coupling strength is mediated by a flux-biased RF SQUID operated in the non-hysteretic regime. By tuning the applied flux bias to the RF SQUID we change the effective mutual inductance, and thus the coupling energy, between the phase qubit and resonator . We verify the modulation of…
▽ More
We demonstrate coherent tunable coupling between a superconducting phase qubit and a lumped element resonator. The coupling strength is mediated by a flux-biased RF SQUID operated in the non-hysteretic regime. By tuning the applied flux bias to the RF SQUID we change the effective mutual inductance, and thus the coupling energy, between the phase qubit and resonator . We verify the modulation of coupling strength from 0 to $100 MHz$ by observing modulation in the size of the splitting in the phase qubit's spectroscopy, as well as coherently by observing modulation in the vacuum Rabi oscillation frequency when on resonance. The measured spectroscopic splittings and vacuum Rabi oscillations agree well with theoretical predictions.
△ Less
Submitted 6 January, 2010;
originally announced January 2010.
-
Low-loss superconducting resonant circuits using vacuum-gap-based microwave components
Authors:
Katarina Cicak,
Dale Li,
Joshua A. Strong,
Michael S. Allman,
Fabio Altomare,
Adam J. Sirois,
Jed D. Whittaker,
John D. Teufel,
Raymond W. Simmonds
Abstract:
We have produced high-quality complex microwave circuits, such as multiplexed resonators and superconducting phase qubits, using a "vacuum-gap" technology that eliminates lossy dielectric materials. We have improved our design and fabrication strategy beyond our earlier work, leading to increased yield, enabling the realization of these complex circuits. We incorporate both novel vacuum-gap wiring…
▽ More
We have produced high-quality complex microwave circuits, such as multiplexed resonators and superconducting phase qubits, using a "vacuum-gap" technology that eliminates lossy dielectric materials. We have improved our design and fabrication strategy beyond our earlier work, leading to increased yield, enabling the realization of these complex circuits. We incorporate both novel vacuum-gap wiring crossovers (VGX) for gradiometric inductors and vacuum-gap capacitors(VGC) on chip to produce resonant circuits that have large internal quality factors (30,000<Q<165,000) at 50 mK, outperforming most dielectric-filled devices. Resonators with VGCs as large as 180 pF confirm single mode behavior of our lumped-element components.
△ Less
Submitted 25 June, 2010; v1 submitted 27 October, 2009;
originally announced October 2009.
-
Autler-Townes effect in a superconducting three-level system
Authors:
Mika A. Sillanpää,
Jian Li,
Katarina Cicak,
Fabio Altomare,
Jae I. Park,
Raymond W. Simmonds,
G. S. Paraoanu,
Pertti J. Hakonen
Abstract:
When a three-level quantum system is irradiated by an intense coupling field resonant with one of the three possible transitions, the absorption peak of an additional probe field involving the remaining level is split. This process is known in quantum optics as the Autler-Townes effect. We observe these phenomena in a superconducting Josephson phase qubit, which can be considered an "artificial at…
▽ More
When a three-level quantum system is irradiated by an intense coupling field resonant with one of the three possible transitions, the absorption peak of an additional probe field involving the remaining level is split. This process is known in quantum optics as the Autler-Townes effect. We observe these phenomena in a superconducting Josephson phase qubit, which can be considered an "artificial atom" with a multilevel quantum structure. The spectroscopy peaks can be explained reasonably well by a simple three-level Hamiltonian model. Simulation of a more complete model (including dissipation, higher levels, and cross-coupling) provides excellent agreement with all the experimental data.
△ Less
Submitted 6 March, 2011; v1 submitted 16 April, 2009;
originally announced April 2009.
-
Vacuum-Gap Capacitors for Low-Loss Superconducting Resonant Circuits
Authors:
Katarina Cicak,
Michael S. Allman,
Joshua A. Strong,
Kevin D. Osborn,
Raymond W. Simmonds
Abstract:
Low-loss microwave components are used in many superconducting resonant circuits from multiplexed readouts of low-temperature detector arrays to quantum bits. Two-level system defects in amorphous dielectric materials cause excess energy loss. In an effort to improve capacitor components, we have used optical lithography and micromachining techniques to develop superconducting parallel-plate cap…
▽ More
Low-loss microwave components are used in many superconducting resonant circuits from multiplexed readouts of low-temperature detector arrays to quantum bits. Two-level system defects in amorphous dielectric materials cause excess energy loss. In an effort to improve capacitor components, we have used optical lithography and micromachining techniques to develop superconducting parallel-plate capacitors in which lossy dielectrics are replaced by vacuum gaps. Resonance measurements at 50 mK on lumped LC circuits that incorporate these vacuum-gap capacitors (VGCs) reveal loss tangents at low powers as low as 4x10^{-5}, significantly lower than with capacitors using amorphous dielectrics. VGCs are structurally robust, small, and easily scaled to capacitance values above 100 pF.
△ Less
Submitted 10 October, 2008;
originally announced October 2008.
-
Decoherence in Josephson Qubits from Dielectric Loss
Authors:
John M. Martinis,
K. B. Cooper,
R. McDermott,
Matthias Steffen,
Markus Ansmann,
K. Osborn,
K. Cicak,
S. Oh,
D. P. Pappas,
R. W. Simmonds,
clare C. Yu
Abstract:
Dielectric loss from two-level states is shown to be a dominant decoherence source in superconducting quantum bits. Depending on the qubit design, dielectric loss from insulating materials or the tunnel junction can lead to short coherence times. We show that a variety of microwave and qubit measurements are well modeled by loss from resonant absorption of two-level defects. Our results demonstr…
▽ More
Dielectric loss from two-level states is shown to be a dominant decoherence source in superconducting quantum bits. Depending on the qubit design, dielectric loss from insulating materials or the tunnel junction can lead to short coherence times. We show that a variety of microwave and qubit measurements are well modeled by loss from resonant absorption of two-level defects. Our results demonstrate that this loss can be significantly reduced by using better dielectrics and fabricating junctions of small area $\lesssim 10 μ\textrm{m}^2$. With a redesigned phase qubit employing low-loss dielectrics, the energy relaxation rate has been improved by a factor of 20, opening up the possibility of multi-qubit gates and algorithms.
△ Less
Submitted 26 July, 2005;
originally announced July 2005.
-
Measurement of the shear strength of a charge-density wave
Authors:
K. O'Neill,
K. Cicak,
R. E. Thorne
Abstract:
We have explored the shear plasticity of charge density waves (CDWs) in niobium triselenide samples with cross-sections having a single micro-fabricated thickness step. Shear stresses along the step result from thickness-dependent CDW pinning. For small thickness differences the CDW depins elastically at the volume average depinning field. For large thickness differences the thicker, more weakly…
▽ More
We have explored the shear plasticity of charge density waves (CDWs) in niobium triselenide samples with cross-sections having a single micro-fabricated thickness step. Shear stresses along the step result from thickness-dependent CDW pinning. For small thickness differences the CDW depins elastically at the volume average depinning field. For large thickness differences the thicker, more weakly pinned side depins first via plastic shear. A simple model describes the qualitative features of our data, and yields a value for the CDW's shear strength of approximately 9.5*10^3 N/m^2 and a lower bound for the elastic shear modulus of 2.1*10^4 N/m^2. These values are orders of magnitude smaller than the CDW's longitudinal modulus but are much larger than corresponding values for flux-line lattices, and may explain the relative coherence of the CDW response.
△ Less
Submitted 3 June, 2004; v1 submitted 10 December, 2003;
originally announced December 2003.
