-
Decoupling elasticity and electrical conductivity of carbon black gels filled with insulating non-Brownian grains
Authors:
Thomas Larsen,
John R. Royer,
Fraser H. J. Laidlaw,
Wilson C. K. Poon,
Tom Larsen,
Søren J. Andreasen,
Jesper de C. Christiansen
Abstract:
A unique bistable transition has been identified in granular/colloidal gel-composites, resulting from shear-induced phase separation of the gel phase into dense blobs. In energy applications, it is critical to understand how this transition influences electrical performance. Mixing conductive colloids with conductive inclusions, we find the conductivity and elasticity move in concert, both decreas…
▽ More
A unique bistable transition has been identified in granular/colloidal gel-composites, resulting from shear-induced phase separation of the gel phase into dense blobs. In energy applications, it is critical to understand how this transition influences electrical performance. Mixing conductive colloids with conductive inclusions, we find the conductivity and elasticity move in concert, both decreasing in the collapsed phase-separated state. Surprisingly, with insulating inclusions these properties can become decoupled, with the conductivity instead increasing despite the collapse of the gel structure.
△ Less
Submitted 13 August, 2024; v1 submitted 11 May, 2024;
originally announced May 2024.
-
Lifetime predictions for virgin and recycled high-density polyethylene under creep conditions
Authors:
A. D. Drozdov,
R. Hoj Jermiin,
J. deClaville Christiansen
Abstract:
Recycling has become a predominant subject in industry and science due to a rising concern for the environment driven by high production volume of plastics. Replacement of virgin polymers with their recycled analogs is not always possible because recycled polymers cannot met the same property profiles as their virgin counterparts. To avoid deterioration of the mechanical properties, it is proposed…
▽ More
Recycling has become a predominant subject in industry and science due to a rising concern for the environment driven by high production volume of plastics. Replacement of virgin polymers with their recycled analogs is not always possible because recycled polymers cannot met the same property profiles as their virgin counterparts. To avoid deterioration of the mechanical properties, it is proposed to replace a virgin polymer with a recycled polymer of another grade whose characteristics (measured in tensile tests) are close to those of the virgin material. This approach opens a way for the use of recycled polymers in short-term application, but its suitability for long-term applications has not yet been assessed. A thorough experimental investigation is conducted of the mechanical response of virgin high-density polyethylene (HDPE) used for insulation of pipes and recycled HDPE manufactured from post-consumer plastic waste (their stiffness, strength and elongation to break adopt similar values). A model is presented in viscoelastoplasticity of semicrystalline polymers. Its parameters are determined by matching experimental data in short-term relaxation and creep tests. The lifetime of virgin and recycled HDPE under creep conditions is evaluated by means of numerical simulation. It is shown that the stress-time to failure diagrams for virgin and recycled HDPE practically coincide.
△ Less
Submitted 16 April, 2024;
originally announced April 2024.
-
Controlling the rheo-electric properties of graphite/carbon black suspensions by 'flow-switching'
Authors:
Thomas Larsen,
John R. Royer,
Fraser H. J. Laidlaw,
Wilson C. K. Poon,
Tom Larsen,
Søren J. Andreasen,
Jesper de C. Christiansen
Abstract:
The ability to manipulate rheological and electrical properties of colloidal carbon black gels makes them attractive in composites for energy applications such as batteries and fuel cells, where they conduct electricity and prevent sedimentation of `granular' active components. While it is commonly assumed that granular fillers have a simple additive effect on the composite properties, new phenome…
▽ More
The ability to manipulate rheological and electrical properties of colloidal carbon black gels makes them attractive in composites for energy applications such as batteries and fuel cells, where they conduct electricity and prevent sedimentation of `granular' active components. While it is commonly assumed that granular fillers have a simple additive effect on the composite properties, new phenomena can emerge unexpectedly, with some composites exhibiting a unique rheological bi-stability between solid-like and liquid-like states. Here we report such bi-stability in suspensions of non-Brownian graphite and colloidal carbon black in oil, a model system to mimic composite suspensions for energy applications. Steady shear below a critical stress elicits a transition to a persistent mechanically weak and poorly conducting state, which must be `rejuvenated' using high-stress shear to recover a stronger, high-conductivity state. Our findings highlight the highly tunable nature of binary granular/gel composite suspensions, and present new possibilities for optimizing mixing and processing conditions for Li-ion battery slurries.
△ Less
Submitted 9 November, 2023;
originally announced November 2023.
-
Pressure-Independent Through-Plane Electrical Conductivity Measurements of Highly Filled Conductive Polymer Composites
Authors:
Thomas Larsen,
Tom Larsen,
Søren J. Andreasen,
Jesper D. C. Christiansen
Abstract:
Highly filled conductive polymer composites (CPCs) are widely used in applications such as bipolar plate materials for polymer electrolyte membrane fuel cells and redox flow batteries, electromagnetic interference shielding and sensors due to their useful electrical properties. A common method for determining through-plane electrical conductivities $\left(σ_{\rm tp} \right)$ of such highly filled…
▽ More
Highly filled conductive polymer composites (CPCs) are widely used in applications such as bipolar plate materials for polymer electrolyte membrane fuel cells and redox flow batteries, electromagnetic interference shielding and sensors due to their useful electrical properties. A common method for determining through-plane electrical conductivities $\left(σ_{\rm tp} \right)$ of such highly filled CPCs applies a conductive carbon paper between electrodes and sample with application of external pressure to improve electrical contact. We show the pressure-dependence of the measured $σ_{\rm tp}$ can be eliminated by using a liquid metal such as the gallium-indium eutectic alloy (EGaIn) as contact material. Results indicate that EGaIn reduces contact resistances and cause three to five times larger $σ_{\rm tp}$ compared to measurements with carbon paper contacts and pressures up to 20 bar.
△ Less
Submitted 9 August, 2022;
originally announced August 2022.
-
Rheology of Polydisperse non-Spherical Graphite Particles Suspended in Mineral Oil
Authors:
Th. Larsen,
A. L. Søbye,
J. R. Royer,
W. C. K. Poon,
T. Larsen,
S. J. Andreasen,
A. D. Drozdov,
J. D. C. Christiansen
Abstract:
We study the role of filler concentration and microphysics on the rheology of polydisperse flake-graphite particles suspended in Newtonian mineral oil. Under steady shear, our samples exhibit shear thinning and yielding behaviour is observed for volume fractions $φ> 0.18$. Time-temperature superposition was observed using an Arrhenius-type horizontal shift factor, giving a flow activation energy t…
▽ More
We study the role of filler concentration and microphysics on the rheology of polydisperse flake-graphite particles suspended in Newtonian mineral oil. Under steady shear, our samples exhibit shear thinning and yielding behaviour is observed for volume fractions $φ> 0.18$. Time-temperature superposition was observed using an Arrhenius-type horizontal shift factor, giving a flow activation energy that is dependent on the graphite volume fraction, suggesting concentration-dependent contributions to relaxation processes in the suspensions. The flow curves are fitted by a constraint-based model, indicating that the flow behaviour is controlled by frictional and adhesive contacts, with the model suggesting that the adhesive stress is temperature dependent.
△ Less
Submitted 26 October, 2022; v1 submitted 6 July, 2022;
originally announced July 2022.
-
Viscosity models for silicate melts
Authors:
Jesper deClaville Christiansen
Abstract:
Rheology of silicates (melts or super cooled as glasses) is one of the most important fields to mankind, as geological activity largely influences life. In this paper, unifying empirical models for the Non-Newtonian shear viscosity and the extensional viscosity are proposed. The models have only one parameter, the zero shear viscosity (the Newtonian plateau), and are valid for a vide range of ch…
▽ More
Rheology of silicates (melts or super cooled as glasses) is one of the most important fields to mankind, as geological activity largely influences life. In this paper, unifying empirical models for the Non-Newtonian shear viscosity and the extensional viscosity are proposed. The models have only one parameter, the zero shear viscosity (the Newtonian plateau), and are valid for a vide range of chemical compositions
△ Less
Submitted 19 June, 2003; v1 submitted 18 June, 2003;
originally announced June 2003.
-
The effect of strain rate on the viscoplastic behavior of isotactic polypropylene at finite strains
Authors:
A. D. Drozdov,
J. deC. Christiansen
Abstract:
Two series of uniaxial tensile tests are performed on isotactic polypropylene with the strain rates ranging from 5 to 200 mm/min. In the first series, injection-molded specimens are used without thermal pre-treatment, whereas in the other series, the samples are annealed for 51 h at 160C prior to testing.
A constitutive model is developed for the viscoplastic behavior of isotactic polypropylen…
▽ More
Two series of uniaxial tensile tests are performed on isotactic polypropylene with the strain rates ranging from 5 to 200 mm/min. In the first series, injection-molded specimens are used without thermal pre-treatment, whereas in the other series, the samples are annealed for 51 h at 160C prior to testing.
A constitutive model is developed for the viscoplastic behavior of isotactic polypropylene at finite strains. A semicrystalline polymer is treated as an equivalent heterogeneous network of chains bridged by permanent junctions (physical cross-links and entanglements). The network is thought of as an ensemble of meso-regions connected with each other by links (lamellar blocks). In the sub-yield region of deformations, junctions between chains in meso-domains slide with respect to their reference positions (which reflects sliding of nodes in the amorphous phase and fine slip of lamellar blocks). Above the yield point, sliding of nodes is accompanied by displacements of meso-domains in the ensemble with respect to each other (which reflects coarse slip and fragmentation of lamellar blocks).
Stress-strain relations for a semicrystalline polymer are derived by using the laws of thermodynamics. The constitutive equations are determined by 5 adjustable parameters that are found by matching observations. Fair agreement is demonstrated between the experimental data and the results of numerical simulation.
△ Less
Submitted 31 July, 2002;
originally announced July 2002.
-
A model for anomalous moisture diffusion through a polymer-clay nanocomposite
Authors:
A. D. Drozdov,
J. deC. Christiansen,
R. K. Gupta,
A. P. Shah
Abstract:
Experimental data are reported on moisture diffusion and the elastoplastic response of an intercalated nanocomposite with vinyl ester resin matrix and montmorillonite clay filler at room temperature. Observations in diffusion tests show that water transport in the neat resin is Fickian, whereas it becomes anomalous (non-Fickian) with the growth of the clay content. This transition is attributed…
▽ More
Experimental data are reported on moisture diffusion and the elastoplastic response of an intercalated nanocomposite with vinyl ester resin matrix and montmorillonite clay filler at room temperature. Observations in diffusion tests show that water transport in the neat resin is Fickian, whereas it becomes anomalous (non-Fickian) with the growth of the clay content. This transition is attributed to immobilization of penetrant molecules on the surfaces of hydrophilic clay layers. Observations in uniaxial tensile tests demonstrate that the response of vinyl ester resin is strongly elastoplastic, whereas an increase in the clay content results in a severe decrease of plastic strains observed as a noticeable reduction of curvatures of the stress--strain diagrams. This is explained by slowing down of molecular mobility in the host matrix driven by confinement of chains in galleries between platelets. Constitutive equations are developed for the anomalous moisture diffusion through and the elastoplastic behavior of a nanocomposite. Adjustable parameters in these relations are found by fitting the experimental data. Fair agreement is demonstrated between the observations and the results of numerical simulation. A striking similarity is revealed between changes in diffusivity, ultimate water uptake and the rate of plastic flow with an increase in the clay content.
△ Less
Submitted 16 June, 2002; v1 submitted 14 June, 2002;
originally announced June 2002.
-
The elastoplastic response of and moisture diffusion through a vinyl ester resin-clay nanocomposite
Authors:
A. D. Drozdov,
J. deC. Christiansen,
R. K. Gupta,
A. P. Shah
Abstract:
Experimental data are reported on the elastoplastic response of and moisture diffusion through a vinyl ester resin-montmorillonite clay nanocomposite with various amounts of filler. Two simple models are developed for the elastoplastic behavior of a nanocomposite and for the anomalous diffusion of penetrant molecules. Adjustable parameters in the constitutive equations are found by fitting the o…
▽ More
Experimental data are reported on the elastoplastic response of and moisture diffusion through a vinyl ester resin-montmorillonite clay nanocomposite with various amounts of filler. Two simple models are developed for the elastoplastic behavior of a nanocomposite and for the anomalous diffusion of penetrant molecules. Adjustable parameters in the constitutive equations are found by fitting the observations. It is revealed that some critical concentration of filler exists (about 1 wt.-%): in the sub-critical region of concentrations, molecular mobility of the host polymer strongly decreases with the clay content, whereas in the post-critical domain, the filler fraction weakly affects mobility of chains.
△ Less
Submitted 23 May, 2002;
originally announced May 2002.
-
Modelling the linear viscoelastic behavior of silicate glasses near the glass transition point
Authors:
A. D. Drozdov,
J. deC. Christiansen
Abstract:
A model is derived for the viscoelastic response of glasses at isothermal uniaxial deformation with small strains. A glass is treated as an ensemble of relaxing units with various activation energies for rearrangement. With reference to the energy-landscape concept, the rearrangement process is thought of as a series of hops of relaxing units (trapped in their potential wells on the energy lands…
▽ More
A model is derived for the viscoelastic response of glasses at isothermal uniaxial deformation with small strains. A glass is treated as an ensemble of relaxing units with various activation energies for rearrangement. With reference to the energy-landscape concept, the rearrangement process is thought of as a series of hops of relaxing units (trapped in their potential wells on the energy landscape) to higher energy levels. Stress-strain relations are developed by using the laws of thermodynamics. Adjustable parameters are found by fitting experimental data in torsional dynamic tests on a multicomponent silicate glass at several temperatures near the glass transition point.
△ Less
Submitted 17 May, 2002;
originally announced May 2002.
-
The effect of annealing on the elastoplastic response of isotactic polypropylene
Authors:
A. D. Drozdov,
J. deC. Christiansen
Abstract:
Four series of tensile loading-unloading tests are performed on isotactic polypropylene in the sub-yield domain of deformations at room temperature. In the first series, injection-molded specimens are used as produced, whereas in the other series the samples are annealed for 24 h at 120, 140 and 160 C, which covers the low-temperature region and an initial part of the high-temperature region of…
▽ More
Four series of tensile loading-unloading tests are performed on isotactic polypropylene in the sub-yield domain of deformations at room temperature. In the first series, injection-molded specimens are used as produced, whereas in the other series the samples are annealed for 24 h at 120, 140 and 160 C, which covers the low-temperature region and an initial part of the high-temperature region of annealing temperatures. A constitutive model is developed for the elastoplastic behavior of a semicrystalline polymer. The stress-strain relations are determined by five adjustable parameters that are found by fitting the experimental data. The effect of annealing is analyzed on the material constants.
△ Less
Submitted 17 May, 2002;
originally announced May 2002.
-
The effect of annealing on the elastoplastic and viscoelastic responses of isotactic polypropylene
Authors:
A. D. Drozdov,
J. deC. Christiansen
Abstract:
Observations are reported on isotactic polypropylene (i) in a series of tensile tests with a constant strain rate on specimens annealed for 24 h at various temperatures in the range from 110 to 150 C and (ii) in two series of creep tests in the sub-yield region of deformation on samples not subjected to thermal treatment and on specimens annealed at 140 C. A model is developed for the elastoplas…
▽ More
Observations are reported on isotactic polypropylene (i) in a series of tensile tests with a constant strain rate on specimens annealed for 24 h at various temperatures in the range from 110 to 150 C and (ii) in two series of creep tests in the sub-yield region of deformation on samples not subjected to thermal treatment and on specimens annealed at 140 C. A model is developed for the elastoplastic and nonlinear viscoelastic responses of semicrystalline polymers. A polymer is treated an equivalent transient network of macromolecules bridged by junctions (physical cross-links, entanglements and lamellar blocks). The network is assumed to be highly heterogeneous, and it is thought of as an ensemble of meso-regions with different activation energies for separation of strands from temporary nodes. The elastoplastic behavior is modelled as sliding of meso-domains with respect to each other driven by mechanical factors. The viscoelastic response is attributed to detachment of active strands from temporary junctions and attachment of dangling chains to the network. Constitutive equations for isothermal uniaxial deformation are derived by using the laws of thermodynamics. Adjustable parameters in the stress-strain relations are found by fitting the experimental data.
△ Less
Submitted 6 March, 2002;
originally announced March 2002.
-
The nonlinear time-dependent response of isotactic polypropylene
Authors:
A. D. Drozdov,
J. deC. Christiansen
Abstract:
Tensile creep tests, tensile relaxation tests and a tensile test with a constant rate of strain are performed on injection-molded isotactic polypropylene at room temperature in the vicinity of the yield point. A constitutive model is derived for the time-dependent behavior of semi-crystalline polymers. A polymer is treated as an equivalent network of chains bridged by permanent junctions. The ne…
▽ More
Tensile creep tests, tensile relaxation tests and a tensile test with a constant rate of strain are performed on injection-molded isotactic polypropylene at room temperature in the vicinity of the yield point. A constitutive model is derived for the time-dependent behavior of semi-crystalline polymers. A polymer is treated as an equivalent network of chains bridged by permanent junctions. The network is modelled as an ensemble of passive meso-regions (with affine nodes) and active meso-domains (where junctions slip with respect to their positions in the bulk medium with various rates). The distribution of activation energies for sliding in active meso-regions is described by a random energy model. Adjustable parameters in the stress--strain relations are found by fitting experimental data. It is demonstrated that the concentration of active meso-domains monotonically grows with strain, whereas the average potential energy for sliding of junctions and the standard deviation of activation energies suffer substantial drops at the yield point. With reference to the concept of dual population of crystalline lamellae, these changes in material parameters are attributed to transition from breakage of subsidiary (thin) lamellae in the sub-yield region to fragmentation of primary (thick) lamellae in the post-yield region of deformation.
△ Less
Submitted 28 February, 2002;
originally announced February 2002.
-
The effect of annealing on the nonlinear viscoelastic response of isotactic polypropylene
Authors:
A. D. Drozdov,
J. deC. Christiansen
Abstract:
Three series of tensile relaxation tests are performed on isotactic polypropylene at room temperature in the vicinity of the yield point. In the first series of experiments, injection-molded samples are used without thermal pre-treatment. In the second and third series, prior to testing the specimens are annealed at 130 C for 4 and 24 hours, respectively. Constitutive equations are derived for t…
▽ More
Three series of tensile relaxation tests are performed on isotactic polypropylene at room temperature in the vicinity of the yield point. In the first series of experiments, injection-molded samples are used without thermal pre-treatment. In the second and third series, prior to testing the specimens are annealed at 130 C for 4 and 24 hours, respectively. Constitutive equations are derived for the time-dependent response of semicrystalline polymers at isothermal loading. A polymer is treated as an equivalent temporary network of macromolecules bridged by junctions (physical cross-links, entanglements and crystalline lamellae). Under loading, junctions slip with respect to their positions in the bulk material (which reflects the viscoplastic behavior), whereas chains separate from their junctions and merge with new ones at random times (which reflects the viscoelastic response). The network is thought of as an ensemble of meso-regions (MR) with various activation energies for detachment of chains from temporary nodes. Adjustable parameters in the stress-strain relations are found by fitting observations. Experimental data demonstrate that the shape of the relaxation spectrum (characterized by the distribution of MRs with various potential energies) is independent of mechanical factors, but is altered at annealing. For specimens not subjected to thermal treatment, the growth of longitudinal strain does not affect the volume fraction of active MRs and the attempt rate for detachment of chains from their junctons. For annealed samples, the concentration of active MRs increases and the attempt rate decreases with strain. These changes in the time-dependent response are attributed to broadening of the distribution of strengths of crystalline lamellae at annealing.
△ Less
Submitted 25 January, 2002;
originally announced January 2002.
-
The nonlinear viscoelastic behavior of polypropylene
Authors:
A. D. Drozdov,
J. deC. Christiansen
Abstract:
A series of tensile relaxation tests is performed on isotactic polypropylene in the sub-yield and post-yield regions at room temperature. Constitutive equations are derived for the time-dependent response of a semicrystalline polymer at isothermal loading with small strains. Adjustable parameters in the stress-strain relations are found by fitting experimental data. It is demonstrated that the g…
▽ More
A series of tensile relaxation tests is performed on isotactic polypropylene in the sub-yield and post-yield regions at room temperature. Constitutive equations are derived for the time-dependent response of a semicrystalline polymer at isothermal loading with small strains. Adjustable parameters in the stress-strain relations are found by fitting experimental data. It is demonstrated that the growth of the longitudinal strain results in an increase in the relaxation rate in a small interval of strains in the sub-yield domain. When the strain exceeds some critical value which is substantially less than the apparent yield strain, the relaxation process becomes strain-independent.
△ Less
Submitted 11 January, 2002;
originally announced January 2002.
