-
Bessel beam fabrication of graphitic micro electrodes in diamond using laser bursts
Authors:
Akhil Kuriakose,
Francesco P. Mezzapesa,
Caterina Gaudiuso,
Andrea Chiappini,
Federico Picollo,
Antonio Ancona,
Ottavia Jedrkiewicz
Abstract:
We present the fabrication of conductive graphitic microelectrodes in diamond by using pulsed Bessel beams in the burst mode laser writing regime. The graphitic wires are created in the bulk of a 500 μm thick monocrystalline HPHT diamond (with (100) orientation) perpendicular to the sample surface, without beam scanning or sample translation. In particular, the role of different burst features in…
▽ More
We present the fabrication of conductive graphitic microelectrodes in diamond by using pulsed Bessel beams in the burst mode laser writing regime. The graphitic wires are created in the bulk of a 500 μm thick monocrystalline HPHT diamond (with (100) orientation) perpendicular to the sample surface, without beam scanning or sample translation. In particular, the role of different burst features in the resistivity of such electrodes is investigated for two very different sub-pulse durations namely 200 fs and 10 ps, together with the role of thermal annealing. Micro-Raman spectroscopy is implemented to investigate the laser-induced crystalline modification, and the results obtained by using two different laser repetition rates, namely 20 Hz and 200 kHz, are compared. A comparison of the micro-Raman spectra and of the resistivity of the electrodes fabricated respectively with 10 ps single pulses and with bursts (of sub-pulses) of similar total duration has also been made, and we show that the burst mode writing regime allows to fabricate more conductive micro electrodes, thanks to the heat accumulation process leading to stronger graphitization. Moreover, the microfabrication of diamond by means of the longest available bursts (~ 46.7 ps duration) featured by 32 sub-pulses of 200 fs duration, with intra-burst time delay of 1.5 ps (sub-THz bursts), leads to graphitic wires with the lowest resistivity values obtained in this work, especially at low repetition rate such as 20 Hz. Indeed, micro electrodes with resistivity on the order of 0.01 Ω cm can be fabricated by Bessel beams in the burst mode regime even when the bursts are constituted by femtosecond laser sub-pulses, in contrast with the results of the standard writing regime with single fs pulses typically leading to less conductive micro electrodes.
△ Less
Submitted 3 June, 2024;
originally announced June 2024.
-
Effect of Crystallographic Orientation on the Potential Barrier and Conductivity of Bessel Written Graphitic Electrodes in Diamond
Authors:
Akhil Kuriakose,
Andrea Chiappini,
Pietro Apra,
Ottavia Jedrkiewicz
Abstract:
Ultrafast laser micromachining can be used to promote diamond graphitisation, enabling the creation of electrically conductive wires embedded in the diamond matrix. In this context, the presence of a potential barrier in the conductivity of transverse graphitic wires fabricated by pulsed Bessel beams without sample translation across 500 μm thick monocrystalline CVD diamond has been studied. In pa…
▽ More
Ultrafast laser micromachining can be used to promote diamond graphitisation, enabling the creation of electrically conductive wires embedded in the diamond matrix. In this context, the presence of a potential barrier in the conductivity of transverse graphitic wires fabricated by pulsed Bessel beams without sample translation across 500 μm thick monocrystalline CVD diamond has been studied. In particular, the role of the crystallographic orientation has been analysed. The morphology and the conductivity of the obtained electrodes have been studied using optical microscopy and current-voltage measurements, while the structural changes have been investigated by means of micro-Raman spectroscopy. By using different laser writing parameters, we have explored the features of different electrodes in a (100) and a (110) oriented diamond crystal respectively. We show that in addition to the use of specific pulse energies and durations (in the fs and ps regimes), the crystallographic orientation of the sample plays an important role in reducing or eliminating the potential barrier height of the IV electrical characterization curves. In a (110) oriented sample, it is possible to eradicate the potential barrier completely even for graphitic wires fabricated at low pulse energy and in the fs pulse duration regime, in contrast to the (100) oriented-crystal case where the barrier is generally observed.
△ Less
Submitted 4 January, 2024;
originally announced January 2024.
-
Integrated waveguides and deterministically positioned nitrogen vacancy centers in diamond created by femtosecond laser writing
Authors:
J. P. Hadden,
V. Bharadwaj,
B. Sotillo,
S. Rampini,
R. Osellame,
J. Witmer,
H. Jayakumar,
T. T. Fernandez,
A. Chiappini,
C. Armellini,
M. Ferrari,
R. Ramponi,
P. E. Barclay,
S. M. Eaton
Abstract:
Diamond's nitrogen vacancy (NV) center is an optically active defect with long spin coherence times, showing great potential for both efficient nanoscale magnetometry and quantum information processing schemes. Recently, both the formation of buried 3D optical waveguides and high quality single NVs in diamond were demonstrated using the versatile femtosecond laser-writing technique. However, until…
▽ More
Diamond's nitrogen vacancy (NV) center is an optically active defect with long spin coherence times, showing great potential for both efficient nanoscale magnetometry and quantum information processing schemes. Recently, both the formation of buried 3D optical waveguides and high quality single NVs in diamond were demonstrated using the versatile femtosecond laser-writing technique. However, until now, combining these technologies has been an outstanding challenge. In this work, we fabricate laser written photonic waveguides in quantum grade diamond which are aligned to within micron resolution to single laser-written NVs, enabling an integrated platform providing deterministically positioned waveguide-coupled NVs. This fabrication technology opens the way towards on-chip optical routing of single photons between NVs and optically integrated spin-based sensing.
△ Less
Submitted 12 March, 2018; v1 submitted 20 January, 2017;
originally announced January 2017.
-
Photonic glass-ceramics: consolidated outcomes and prospects
Authors:
Brigitte Boulard,
Tran T. T. Van,
Anna Łukowiak,
Adel Bouajaj,
Rogéria Rocha Gonçalves,
Andrea Chiappini,
Alessandro Chiasera,
Wilfried Blanc,
Alicia Duran,
Sylvia Turrell,
Francesco Prudenzano,
Francesco Scotognella,
Roberta Ramponi,
Marian Marciniak,
Giancarlo Righini,
Maurizio Ferrari
Abstract:
Transparent glass-ceramics are nanocomposite materials which offer specific characteristics of capital importance in photonics. This kind of two-phase materials is constituted by nanocrystals embedded in a glass matrix and the respective composition and volume fractions of crystalline and amorphous phase determine the properties of the glass-ceramic. Among these properties transparency is crucial,…
▽ More
Transparent glass-ceramics are nanocomposite materials which offer specific characteristics of capital importance in photonics. This kind of two-phase materials is constituted by nanocrystals embedded in a glass matrix and the respective composition and volume fractions of crystalline and amorphous phase determine the properties of the glass-ceramic. Among these properties transparency is crucial, in particular when confined structures, such as dielectric optical waveguides and optical fibers, are considered, and the number of papers devoted to this topic is continuously increasing. Another important point is the role of the nanocrystals when activated by luminescent species, as rare earth ions, and their effect on the spectroscopic properties of the glass-ceramic. The presence of the crystalline environment around the rare earth ion allows high absorption and emission cross sections, reduction of the non-radiative relaxation thanks to the lower phonon cutoff energy, and tailoring of the ion-ion interaction by the control of the rare earth ion partition. This last point is crucial and still object of intense experimental and theoretical studies. The composition of the glass matrix also impacts the properties of the rare earth ions located in nanoparticles. Moreover, some kinds of nanocrystals can play as effective rare earth sensitizers. Fabrication, assessment and application of glass-ceramic photonic systems, especially waveguides, deserve an appropriate discussion which is the aim of this paper, focused on luminescent glass-ceramics. In this work, a brief historical review, consolidated results and recent advances in this important scientific and technological area will be presented, and some perspectives will be outlined.
△ Less
Submitted 12 November, 2015;
originally announced November 2015.
