Showing 1–50 of 58 results for author: Chapman, J

Response to recent comments on Phys. Rev. B 107, 245423 (2023) and Subsection S4.3 of the Supp. Info. for Nature 638, 651-655 (2025)

Authors: Morteza Aghaee, Zulfi Alam, Mariusz Andrzejczuk, Andrey E. Antipov, Mikhail Astafev, Amin Barzegar, Bela Bauer, Jonathan Becker, Umesh Kumar Bhaskar, Alex Bocharov, Srini Boddapati, David Bohn, Jouri Bommer, Leo Bourdet, Samuel Boutin, Benjamin J. Chapman, Sohail Chatoor, Anna Wulff Christensen, Patrick Codd, William S. Cole, Paul Cooper, Fabiano Corsetti, Ajuan Cui, Andreas Ekefjärd, Saeed Fallahi , et al. (105 additional authors not shown)

Abstract: The topological gap protocol (TGP) is a statistical test designed to identify a topological phase with high confidence and without human bias. It is used to determine a promising parameter regime for operating topological qubits. The protocol's key metric is the probability of incorrectly identifying a trivial region as topological, referred to as the false discovery rate (FDR). Two recent manuscr… ▽ More The topological gap protocol (TGP) is a statistical test designed to identify a topological phase with high confidence and without human bias. It is used to determine a promising parameter regime for operating topological qubits. The protocol's key metric is the probability of incorrectly identifying a trivial region as topological, referred to as the false discovery rate (FDR). Two recent manuscripts [arXiv:2502.19560, arXiv:2503.08944] engage with the topological gap protocol and its use in Phys. Rev. B 107, 245423 (2023) and Subsection S4.3 of the Supplementary Information for Nature 638, 651-655 (2025), although they do not explicitly dispute the main results of either one. We demonstrate that the objections in arXiv:2502.19560 and arXiv:2503.08944 are unfounded, and we uphold the conclusions of Phys. Rev. B 107, 245423 (2023) and Nature 638, 651-655 (2025). Specifically, we show that no flaws have been identified in our estimate of the false discovery rate (FDR). We provide a point-by-point rebuttal of the comments in arXiv:2502.19560 and arXiv:2503.08944. △ Less

Submitted 17 April, 2025; originally announced April 2025.

Comments: Response to arXiv:2502.19560 and arXiv:2503.08944. 11 pages, 5 figures, 2 tables, code for reproduction

Roadmap to fault tolerant quantum computation using topological qubit arrays

Authors: David Aasen, Morteza Aghaee, Zulfi Alam, Mariusz Andrzejczuk, Andrey Antipov, Mikhail Astafev, Lukas Avilovas, Amin Barzegar, Bela Bauer, Jonathan Becker, Juan M. Bello-Rivas, Umesh Bhaskar, Alex Bocharov, Srini Boddapati, David Bohn, Jouri Bommer, Parsa Bonderson, Jan Borovsky, Leo Bourdet, Samuel Boutin, Tom Brown, Gary Campbell, Lucas Casparis, Srivatsa Chakravarthi, Rui Chao , et al. (157 additional authors not shown)

Abstract: We describe a concrete device roadmap towards a fault-tolerant quantum computing architecture based on noise-resilient, topologically protected Majorana-based qubits. Our roadmap encompasses four generations of devices: a single-qubit device that enables a measurement-based qubit benchmarking protocol; a two-qubit device that uses measurement-based braiding to perform single-qubit Clifford operati… ▽ More We describe a concrete device roadmap towards a fault-tolerant quantum computing architecture based on noise-resilient, topologically protected Majorana-based qubits. Our roadmap encompasses four generations of devices: a single-qubit device that enables a measurement-based qubit benchmarking protocol; a two-qubit device that uses measurement-based braiding to perform single-qubit Clifford operations; an eight-qubit device that can be used to show an improvement of a two-qubit operation when performed on logical qubits rather than directly on physical qubits; and a topological qubit array supporting lattice surgery demonstrations on two logical qubits. Devices that enable this path require a superconductor-semiconductor heterostructure that supports a topological phase, quantum dots and coupling between those quantum dots that can create the appropriate loops for interferometric measurements, and a microwave readout system that can perform fast, low-error single-shot measurements. We describe the key design components of these qubit devices, along with the associated protocols for demonstrations of single-qubit benchmarking, Clifford gate execution, quantum error detection, and quantum error correction, which differ greatly from those in more conventional qubits. Finally, we comment on implications and advantages of this architecture for utility-scale quantum computation. △ Less

Submitted 7 April, 2025; v1 submitted 17 February, 2025; originally announced February 2025.

Comments: v2: 12+8 pages, 9+5 figures, significant main text revisions, added appendices discussing idle coherence times and non-Clifford operations v1:11+6 pages, 8+5 figures

First-principles Spin and Optical Properties of Vacancy Clusters in Lithium Fluoride

Authors: Mariano Guerrero Perez, Keegan Walkup, Jordan Chapman, Pranshu Bhaumik, Giti A. Khodaparast, Brenden A. Magill, Patrick Huber, Vsevolod Ivanov

Abstract: Vacancy-cluster color centers in lithium fluoride have been studied in detail both theoretically and experimentally for over a century, giving rise to various applications in solid-state lasers, broadband photonic devices, and radiation dosimeters. These color centers are also attractive candidate platforms for applications in quantum information science, due to their spin properties and strong co… ▽ More Vacancy-cluster color centers in lithium fluoride have been studied in detail both theoretically and experimentally for over a century, giving rise to various applications in solid-state lasers, broadband photonic devices, and radiation dosimeters. These color centers are also attractive candidate platforms for applications in quantum information science, due to their spin properties and strong coupling to the crystal lattice, which allows their properties to be easily tuned. Here we present hybrid functional calculations of common vacancy defects in lithium fluoride, including their energetic, spin, and optical properties. We show that for a wide range of hybrid functional parameters tuned to match the experimental band gap, certain defects have little variation in their predicted optical properties. We further demonstrate that the parameters needed to satisfy the generalized Koopman's theorem and correctly position defect levels within the gap, can vary dramatically, even for different charge states of the same defect. Our work establishes the accuracy of the computationally lightweight hybrid-functional approach for predicting the optical and energetic properties of color centers in polar materials. △ Less

Submitted 30 December, 2024; v1 submitted 30 December, 2024; originally announced December 2024.

Comments: 10 pages, 5 figures

Physics-based battery model parametrisation from impedance data

Authors: Noël Hallemans, Nicola E. Courtier, Colin P. Please, Brady Planden, Rishit Dhoot, Robert Timms, S. Jon chapman, David Howey, Stephen R. Duncan

Abstract: Non-invasive parametrisation of physics-based battery models can be performed by fitting the model to electrochemical impedance spectroscopy (EIS) data containing features related to the different physical processes. However, this requires an impedance model to be derived, which may be complex to obtain analytically. We have developed the open-source software PyBaMM-EIS that provides a fast method… ▽ More Non-invasive parametrisation of physics-based battery models can be performed by fitting the model to electrochemical impedance spectroscopy (EIS) data containing features related to the different physical processes. However, this requires an impedance model to be derived, which may be complex to obtain analytically. We have developed the open-source software PyBaMM-EIS that provides a fast method to compute the impedance of any PyBaMM model at any operating point using automatic differentiation. Using PyBaMM-EIS, we investigate the impedance of the single particle model, single particle model with electrolyte (SPMe), and Doyle-Fuller-Newman model, and identify the SPMe as a parsimonious option that shows the typical features of measured lithium-ion cell impedance data. We provide a grouped parameter SPMe and analyse the features in the impedance related to each parameter. Using the open-source software PyBOP, we estimate 18 grouped parameters both from simulated impedance data and from measured impedance data from a LG M50LT lithium-ion battery. The parameters that directly affect the response of the SPMe can be accurately determined and assigned to the correct electrode. Crucially, parameter fitting must be done simultaneously to data across a wide range of states-of-charge. Overall, this work presents a practical way to find the parameters of physics-based models. △ Less

Submitted 23 April, 2025; v1 submitted 14 December, 2024; originally announced December 2024.

Journal ref: Journal of the Electrochemical Society 172 (2025) 060507

Gas-induced bulging in pouch-cell batteries: a mechanical model

Authors: Andrea Giudici, Colin Please, Jon Chapman

Abstract: Over the long timescale of many charge/discharge cycles, gas formation can result in large bulging deformations of a Lithium-ion pouch cell, which is a key failure mechanism in batteries. Guided by recent experimental X-ray tomography data of a bulging cell, we propose a homogenised mechanical model to predict the shape of the deformation and the stress distribution analytically. Our model can be… ▽ More Over the long timescale of many charge/discharge cycles, gas formation can result in large bulging deformations of a Lithium-ion pouch cell, which is a key failure mechanism in batteries. Guided by recent experimental X-ray tomography data of a bulging cell, we propose a homogenised mechanical model to predict the shape of the deformation and the stress distribution analytically. Our model can be included in battery simulation models to capture the effects of mechanical degradation. Furthermore, with knowledge of the bending stiffness of the cathode electrodes and current collectors, and by fitting our model to experimental data, we can predict the internal pressure and the amount of gas in the battery, thus assisting in monitoring the state of health (SOH) of the cell without breaking the sealed case. △ Less

Submitted 20 November, 2024; originally announced November 2024.

Multiple scales homogenisation of a porous viscoelastic material with rigid inclusions: application to lithium-ion battery electrodes

Authors: J. M. Foster, A. F. Galvis, B. Protas, S. J. Chapman

Abstract: This paper explores the mechanical behaviour of the composite materials used in modern lithium-ion battery electrodes. These contain relatively high modulus active particle inclusions within a two-component matrix of liquid electrolyte which penetrates the pore space within a viscoelastic polymer binder. Deformations are driven by a combination of (i) swelling/contraction of the electrode particle… ▽ More This paper explores the mechanical behaviour of the composite materials used in modern lithium-ion battery electrodes. These contain relatively high modulus active particle inclusions within a two-component matrix of liquid electrolyte which penetrates the pore space within a viscoelastic polymer binder. Deformations are driven by a combination of (i) swelling/contraction of the electrode particles in response to lithium insertion/extraction, (ii) swelling of the binder as it absorbs electrolyte, (iii) external loading and (iv) flow of the electrolyte within the pores. We derive the macroscale response of the composite using systematic multiple scales homomgenisation by exploiting the disparity in lengthscales associated with the size of an electrode particle and the electrode as a whole. The resulting effective model accurately replicates the behaviour of the original model (as is demonstrated by a series of relevant case studies) but, crucially, is markedly {simpler and hence} cheaper to solve. This is significant practical value because it facilitates low-cost, realistic computations of the mechanical states of battery electrodes, thereby allowing model-assisted development of battery designs that are better able to withstand the mechanical abuse encountered in practice and ultimately paving the way for longer-lasting batteries. △ Less

Submitted 15 October, 2024; originally announced October 2024.

Comments: 46 pages, 19 figures

Bifurcation in correlation length of the Ising model on a "Toblerone" lattice

Authors: Joseph Chapman, Bruno Tomasello, Sam T. Carr

Abstract: The classical Ising chain is the paradigm for the non-existence of phase transitions in 1D systems and was solved by Ernst Ising one hundred years ago. More recently, a decorated two leg Ising ladder has received interest for the curious thermodynamics that resemble a phase transition; a sharp peak in the specific heat at low, but finite temperature. We use this model to reveal a bifurcation in th… ▽ More The classical Ising chain is the paradigm for the non-existence of phase transitions in 1D systems and was solved by Ernst Ising one hundred years ago. More recently, a decorated two leg Ising ladder has received interest for the curious thermodynamics that resemble a phase transition; a sharp peak in the specific heat at low, but finite temperature. We use this model to reveal a bifurcation in the correlation lengths due to a crossing of the sub-leading eigenvalues of the transfer matrix, which results in two distinct length scales necessary to describe to the decay of correlations. We discuss this phenomenon in the context of the geometric frustration in the model. We also provide additional results to aid in the understanding of the curious thermodynamics of the model through a study of the magnetic susceptibilities. △ Less

Submitted 2 September, 2024; v1 submitted 31 May, 2024; originally announced May 2024.

Comments: 24 pages, 16 figures. Further references added, misprints corrected, additional points added to conclusions, some ambiguities clarified

Interferometric Single-Shot Parity Measurement in an InAs-Al Hybrid Device

Authors: Morteza Aghaee, Alejandro Alcaraz Ramirez, Zulfi Alam, Rizwan Ali, Mariusz Andrzejczuk, Andrey Antipov, Mikhail Astafev, Amin Barzegar, Bela Bauer, Jonathan Becker, Umesh Kumar Bhaskar, Alex Bocharov, Srini Boddapati, David Bohn, Jouri Bommer, Leo Bourdet, Arnaud Bousquet, Samuel Boutin, Lucas Casparis, Benjamin James Chapman, Sohail Chatoor, Anna Wulff Christensen, Cassandra Chua, Patrick Codd, William Cole , et al. (137 additional authors not shown)

Abstract: The fusion of non-Abelian anyons or topological defects is a fundamental operation in measurement-only topological quantum computation. In topological superconductors, this operation amounts to a determination of the shared fermion parity of Majorana zero modes. As a step towards this, we implement a single-shot interferometric measurement of fermion parity in indium arsenide-aluminum heterostruct… ▽ More The fusion of non-Abelian anyons or topological defects is a fundamental operation in measurement-only topological quantum computation. In topological superconductors, this operation amounts to a determination of the shared fermion parity of Majorana zero modes. As a step towards this, we implement a single-shot interferometric measurement of fermion parity in indium arsenide-aluminum heterostructures with a gate-defined nanowire. The interferometer is formed by tunnel-coupling the proximitized nanowire to quantum dots. The nanowire causes a state-dependent shift of these quantum dots' quantum capacitance of up to 1 fF. Our quantum capacitance measurements show flux h/2e-periodic bimodality with a signal-to-noise ratio of 1 in 3.7 $μ$s at optimal flux values. From the time traces of the quantum capacitance measurements, we extract a dwell time in the two associated states that is longer than 1 ms at in-plane magnetic fields of approximately 2 T. These results are consistent with a measurement of the fermion parity encoded in a pair of Majorana zero modes that are separated by approximately 3 $μ$m and subjected to a low rate of poisoning by non-equilibrium quasiparticles. The large capacitance shift and long poisoning time enable a parity measurement error probability of 1%. △ Less

Submitted 2 April, 2024; v1 submitted 17 January, 2024; originally announced January 2024.

Comments: Added data on a second measurement of device A and a measurement of device B, expanded discussion of a trivial scenario. Refs added, author list updated

Spectroscopy-Guided Discovery of Three-Dimensional Structures of Disordered Materials with Diffusion Models

Authors: Hyuna Kwon, Tim Hsu, Wenyu Sun, Wonseok Jeong, Fikret Aydin, James Chapman, Xiao Chen, Matthew R. Carbone, Deyu Lu, Fei Zhou, Tuan Anh Pham

Abstract: The ability to rapidly develop materials with desired properties has a transformative impact on a broad range of emerging technologies. In this work, we introduce a new framework based on the diffusion model, a recent generative machine learning method to predict 3D structures of disordered materials from a target property. For demonstration, we apply the model to identify the atomic structures of… ▽ More The ability to rapidly develop materials with desired properties has a transformative impact on a broad range of emerging technologies. In this work, we introduce a new framework based on the diffusion model, a recent generative machine learning method to predict 3D structures of disordered materials from a target property. For demonstration, we apply the model to identify the atomic structures of amorphous carbons ($a$-C) as a representative material system from the target X-ray absorption near edge structure (XANES) spectra--a common experimental technique to probe atomic structures of materials. We show that conditional generation guided by XANES spectra reproduces key features of the target structures. Furthermore, we show that our model can steer the generative process to tailor atomic arrangements for a specific XANES spectrum. Finally, our generative model exhibits a remarkable scale-agnostic property, thereby enabling generation of realistic, large-scale structures through learning from a small-scale dataset (i.e., with small unit cells). Our work represents a significant stride in bridging the gap between materials characterization and atomic structure determination; in addition, it can be leveraged for materials discovery in exploring various material properties as targeted. △ Less

Submitted 9 December, 2023; originally announced December 2023.

Polarization dynamics of solid-state quantum emitters

Authors: Anand Kumar, Çağlar Samaner, Chanaprom Cholsuk, Tjorben Matthes, Serkan Paçal, Yağız Oyun, Ashkan Zand, Robert J. Chapman, Grégoire Saerens, Rachel Grange, Sujin Suwanna, Serkan Ateş, Tobias Vogl

Abstract: Quantum emitters in solid-state crystals have recently attracted a lot of attention due to their simple applicability in optical quantum technologies. The polarization of single photons generated by quantum emitters is one of the key parameters that play a crucial role in the applications, such as quantum computation that uses the indistinguishability of photons. However, the degree of single phot… ▽ More Quantum emitters in solid-state crystals have recently attracted a lot of attention due to their simple applicability in optical quantum technologies. The polarization of single photons generated by quantum emitters is one of the key parameters that play a crucial role in the applications, such as quantum computation that uses the indistinguishability of photons. However, the degree of single photon polarization is typically quantified using time-averaged photoluminescence intensity of single emitters, which provides limited information about the dipole properties in solids. In this work, we use single defects in hexagonal boron nitride and nanodiamond as efficient room-temperature single photon sources to reveal the origin and the temporal evolution of dipole orientation in solid-state quantum emitters. The angle of excitation and emission dipoles relative to the crystal axes are determined experimentally and then calculated using density functional theory, which results in characteristic angles for every specific defect that can be used as an efficient tool for defect identification and understanding their atomic structure. Moreover, the temporal polarization dynamics reveal a strongly modified linear polarization visibility that depends on the excited state decay time of individual excitation. This effect can be traced back potentially to the excitation of excess charges in the local crystal environment. Understanding such hidden time-dependent mechanisms can further be used to improve the performance of polarization-sensitive experiments, in particular that of quantum communication with single photon emitters. △ Less

Submitted 26 February, 2024; v1 submitted 8 March, 2023; originally announced March 2023.

Journal ref: ACS Nano 18 (7), 5270-5281 (2024)

Score-based denoising for atomic structure identification

Authors: Tim Hsu, Babak Sadigh, Nicolas Bertin, Cheol Woo Park, James Chapman, Vasily Bulatov, Fei Zhou

Abstract: We propose an effective method for removing thermal vibrations that complicate the task of analyzing complex dynamics in atomistic simulation of condensed matter. Our method iteratively subtracts thermal noises or perturbations in atomic positions using a denoising score function trained on synthetically noised but otherwise perfect crystal lattices. The resulting denoised structures clearly revea… ▽ More We propose an effective method for removing thermal vibrations that complicate the task of analyzing complex dynamics in atomistic simulation of condensed matter. Our method iteratively subtracts thermal noises or perturbations in atomic positions using a denoising score function trained on synthetically noised but otherwise perfect crystal lattices. The resulting denoised structures clearly reveal underlying crystal order while retaining disorder associated with crystal defects. Purely geometric, agnostic to interatomic potentials, and trained without inputs from explicit simulations, our denoiser can be applied to simulation data generated from vastly different interatomic interactions. The denoiser is shown to improve existing classification methods such as common neighbor analysis and polyhedral template matching, reaching perfect classification accuracy on a recent benchmark dataset of thermally perturbed structures up to the melting point. Demonstrated here in a wide variety of atomistic simulation contexts, the denoiser is general, robust, and readily extendable to delineate order from disorder in structurally and chemically complex materials. △ Less

Submitted 3 May, 2023; v1 submitted 5 December, 2022; originally announced December 2022.

Hydrogen in Disordered Titania: Connecting Local Chemistry, Structure, and Stoichiometry through Accelerated Exploration

Authors: James Chapman, Kyoung E. Kweon, Yakun Zhu, Kyle Bushick, Leonardus Bimo Bayu Aji, Christopher Colla, Nir Goldman, Nathan Keilbart, Roger Qui, Tae Wook Heo, Brandon C. Wood

Abstract: Hydrogen incorporation in native surface oxides of metal alloys often controls the onset of metal hydriding, with implications for materials corrosion and hydrogen storage. A key representative example is titania, which forms as a passivating layer on a variety of titanium alloys for structural and functional applications. These oxides tend to be structurally diverse, featuring polymorphic phases,… ▽ More Hydrogen incorporation in native surface oxides of metal alloys often controls the onset of metal hydriding, with implications for materials corrosion and hydrogen storage. A key representative example is titania, which forms as a passivating layer on a variety of titanium alloys for structural and functional applications. These oxides tend to be structurally diverse, featuring polymorphic phases, grain boundaries, and amorphous regions that generate a disparate set of unique local environments for hydrogen. Here, we introduce a workflow that can efficiently and accurately navigate this complexity. First, a machine learning force field, trained on ab initio molecular dynamics simulations, was used to generate amorphous configurations. Density functional theory calculations were then performed on these structures to identify local oxygen environments, which were compared against experimental observations. Second, to classify subtle differences across the disordered configuration space, we employ a graph-based sampling procedure. Finally, local hydrogen binding energies are computed using exhaustive density functional theory calculations on representative configurations. We leverage this methodology to show that hydrogen binding energetics are described by local oxygen coordination, which in turn is affected by stoichiometry. Together these results imply that hydrogen incorporation and transport in TiO$_x$ can be tailored through compositional engineering, with implications for improving performance and durability of titanium-derived alloys in hydrogen environments. △ Less

Submitted 23 August, 2022; originally announced August 2022.

Precision measurement of the microwave dielectric loss of sapphire in the quantum regime with parts-per-billion sensitivity

Authors: Alexander P. Read, Benjamin J. Chapman, Chan U Lei, Jacob C. Curtis, Suhas Ganjam, Lev Krayzman, Luigi Frunzio, Robert J. Schoelkopf

Abstract: Dielectric loss is known to limit state-of-the-art superconducting qubit lifetimes. Recent experiments imply upper bounds on bulk dielectric loss tangents on the order of $100$ parts-per-billion, but because these inferences are drawn from fully fabricated devices with many loss channels, they do not definitively implicate or exonerate the dielectric. To resolve this ambiguity, we have devised a m… ▽ More Dielectric loss is known to limit state-of-the-art superconducting qubit lifetimes. Recent experiments imply upper bounds on bulk dielectric loss tangents on the order of $100$ parts-per-billion, but because these inferences are drawn from fully fabricated devices with many loss channels, they do not definitively implicate or exonerate the dielectric. To resolve this ambiguity, we have devised a measurement method capable of separating and resolving bulk dielectric loss with a sensitivity at the level of $5$ parts per billion. The method, which we call the dielectric dipper, involves the in-situ insertion of a dielectric sample into a high-quality microwave cavity mode. Smoothly varying the sample's participation in the cavity mode enables a differential measurement of the sample's dielectric loss tangent. The dielectric dipper can probe the low-power behavior of dielectrics at cryogenic temperatures, and does so without the need for any lithographic process, enabling controlled comparisons of substrate materials and processing techniques. We demonstrate the method with measurements of EFG sapphire, from which we infer a bulk loss tangent of $62(7) \times 10^{-9}$ and a substrate-air interface loss tangent of $12(2) \times 10^{-4}$. For a typical transmon, this bulk loss tangent would limit device quality factors to less than $20$ million, suggesting that bulk loss is likely the dominant loss mechanism in the longest-lived transmons on sapphire. We also demonstrate this method on HEMEX sapphire and bound its bulk loss tangent to be less than $15(5) \times 10^{-9}$. As this bound is about 3 times smaller than the bulk loss tangent of EFG sapphire, use of HEMEX sapphire as a substrate would lift the bulk dielectric coherence limit of a typical transmon qubit to several milliseconds. △ Less

Submitted 30 April, 2023; v1 submitted 28 June, 2022; originally announced June 2022.

Comments: 8 pages, 5 figures, and 13 page appendix. Submitted revision synchronizes content with associated journal article, including the addition of figure 7 (methods of cavity measurement) and Appendix H (bounding magnetic bulk loss)

Journal ref: Phys. Rev. Applied 19, 034064 (2023)

A Machine-Learned Spin-Lattice Potential for Dynamic Simulations of Defective Magnetic Iron

Authors: Jacob Bernard John Chapman, Pui-Wai Ma

Abstract: A machine-learned spin-lattice interatomic potential (MSLP) for magnetic iron is developed and applied to mesoscopic scale defects. It is achieved by augmenting a spin-lattice Hamiltonian with a neural network term trained to descriptors representing a mix of local atomic configuration and magnetic environments. It reproduces the cohesive energy of BCC and FCC phases with various magnetic states.… ▽ More A machine-learned spin-lattice interatomic potential (MSLP) for magnetic iron is developed and applied to mesoscopic scale defects. It is achieved by augmenting a spin-lattice Hamiltonian with a neural network term trained to descriptors representing a mix of local atomic configuration and magnetic environments. It reproduces the cohesive energy of BCC and FCC phases with various magnetic states. It predicts the formation energy and complex magnetic structure of point defects in quantitative agreement with density functional theory (DFT) including the reversal and quenching of magnetic moments near the core of defects. The Curie temperature is calculated through spin-lattice dynamics showing good computational stability at high temperature. The potential is applied to study magnetic fluctuations near sizable dislocation loops. The MSLP transcends current treatments using DFT and molecular dynamics, and surpasses other spin-lattice potentials that only treat near-perfect crystal cases. △ Less

Submitted 10 May, 2022; originally announced May 2022.

Quantifying Disorder One Atom at a Time Using an Interpretable Graph Neural Network Paradigm

Authors: James Chapman, Tim Hsu, Xiao Chen, Tae Wook Heo, Brandon C. Wood

Abstract: Quantifying the level of atomic disorder within materials is critical to understanding how evolving local structural environments dictate performance and durability. Here, we leverage graph neural networks to define a physically interpretable metric for local disorder. This metric encodes the diversity of the local atomic configurations as a continuous spectrum between the solid and liquid phases,… ▽ More Quantifying the level of atomic disorder within materials is critical to understanding how evolving local structural environments dictate performance and durability. Here, we leverage graph neural networks to define a physically interpretable metric for local disorder. This metric encodes the diversity of the local atomic configurations as a continuous spectrum between the solid and liquid phases, quantified against a distribution of thermal perturbations. We apply this novel methodology to three prototypical examples with varying levels of disorder: (1) solid-liquid interfaces, (2) polycrystalline microstructures, and (3) grain boundaries. Using elemental aluminum as a case study, we show how our paradigm can track the spatio-temporal evolution of interfaces, incorporating a mathematically defined description of the spatial boundary between order and disorder. We further show how to extract physics-preserved gradients from our continuous disorder fields, which may be used to understand and predict materials performance and failure. Overall, our framework provides an intuitive and generalizable pathway to quantify the relationship between complex local atomic structure and coarse-grained materials phenomena. △ Less

Submitted 16 June, 2022; v1 submitted 18 March, 2022; originally announced March 2022.

Quantifying Free-volume Topology in Atomistic Structures Through a Combination of Voxelization and Graph Theory

Authors: James Chapman, Nir Goldman

Abstract: We introduce a new computational methodology for the identification and characterization of free volume within/around atomistic configurations. This scheme employs a three-stage workflow, by which spheres are iteratively grown inside of voxels, and ultimately converted to planar graphs, which are then characterized via a graph-based order parameter. Our approach is computationally efficient, physi… ▽ More We introduce a new computational methodology for the identification and characterization of free volume within/around atomistic configurations. This scheme employs a three-stage workflow, by which spheres are iteratively grown inside of voxels, and ultimately converted to planar graphs, which are then characterized via a graph-based order parameter. Our approach is computationally efficient, physically intuitive, and universally transferable to any material system. Validation of our methodology is performed on several sets of materials problems: (1) classification of unique free volumes in various crystal phases, (2) characterization of free volume defects in metals/alloys, and (3) autonomous detection and classification of complex surface defects during epitaxial growth simulations. Our method accurately identifies and characterizes unique free volumes over a multitude of systems and length scales, indicating its potential for future use in understanding the relationship between free volume morphology and material properties under both static and dynamic conditions. △ Less

Submitted 16 June, 2022; v1 submitted 10 November, 2021; originally announced November 2021.

A Physically-informed Graph-based Order Parameter for the Universal Characterization of Atomic Structures

Authors: James Chapman, Nir Goldman, Brandon Wood

Abstract: A new graph-based order parameter is introduced for the characterization of atomistic structures. The order parameter is universal to any material/chemical system, and is transferable to all structural geometries. Three sets of data are used to validate both the generalizability and accuracy of the algorithm: (1) liquid lithium configurations spanning up to 300 GPa, (2) condensed phases of carbon… ▽ More A new graph-based order parameter is introduced for the characterization of atomistic structures. The order parameter is universal to any material/chemical system, and is transferable to all structural geometries. Three sets of data are used to validate both the generalizability and accuracy of the algorithm: (1) liquid lithium configurations spanning up to 300 GPa, (2) condensed phases of carbon along with nanotubes and buckyballs at ambient and high temperature, and (3) a diverse set of aluminum configurations including surfaces, compressed and expanded lattices, point defects, grain boundaries, liquids, nanoparticles, all at non-zero temperatures. The aluminum configurations are also compared to existing characterization methods for both speed and accuracy. Our order parameter uniquely classifies every configuration and outperforms all crystalline order parameters studied here, opening the door for its use in a multitude of complex application spaces that can require fine configurational characterization of materials. △ Less

Submitted 15 June, 2021; originally announced June 2021.

Effect of Non-Heisenberg Magnetic Interactions on Defects in Ferromagnetic Iron

Authors: Jacob B. J. Chapman, Pui-Wai Ma, Sergei L. Dudarev

Abstract: Fundamental flaws in the Heisenberg Hamiltonian are highlighted in the context of its application to BCC Fe, including the particular issues arising when modelling lattice defects. Exchange integrals are evaluated using the magnetic force theorem. The bilinear exchange coupling constants are calculated for all the interacting pairs of atomic magnetic moments in large simulation cells containing de… ▽ More Fundamental flaws in the Heisenberg Hamiltonian are highlighted in the context of its application to BCC Fe, including the particular issues arising when modelling lattice defects. Exchange integrals are evaluated using the magnetic force theorem. The bilinear exchange coupling constants are calculated for all the interacting pairs of atomic magnetic moments in large simulation cells containing defects, enabling a direct mapping of the magnetic energy onto the Heisenberg Hamiltonian and revealing its limitations. We provide a simple procedure for extracting the Landau parameters from DFT calculations, to construct a Heisenberg-Landau Hamiltonian. We quantitatively show how the Landau terms correct the exchange-energy hypersurface, which is essential for the accurate evaluation of energies and migration barriers of defects. △ Less

Submitted 2 April, 2020; originally announced April 2020.

Journal ref: Phys. Rev. B 102, 224106 (2020)

The effect of mechanical stress on lithium distribution and geometry optimisation for multi-material lithium-ion anodes

Authors: Ian P. E. Roper, S. Jon Chapman, Colin P. Please

Abstract: A model is presented for predicting the open-circuit voltage (OCV) and lithium distribution within lithium-ion anodes containing multiple materials, coupling linear elasticity with a stress-dependent chemical potential. The model is applied to a spherical radially-symmetric nano-particle with a silicon core and a graphite shell, highlighting the large effect on lithium distribution and OCV caused… ▽ More A model is presented for predicting the open-circuit voltage (OCV) and lithium distribution within lithium-ion anodes containing multiple materials, coupling linear elasticity with a stress-dependent chemical potential. The model is applied to a spherical radially-symmetric nano-particle with a silicon core and a graphite shell, highlighting the large effect on lithium distribution and OCV caused by the stress-coupling. Various performance measures based on the expanded volume, the amount of lithium intercalated and the maximum stress induced, are calculated for a silicon core with a graphite shell to enable optimisation of the volume of the silicon core. △ Less

Submitted 4 July, 2019; originally announced August 2019.

Comments: 21 pages, 13 figures

The Dynamics of Magnetism in Fe-Cr Alloys with Cr Clustering

Authors: J. B. J. Chapman, S. L. Dudarev, P. -W. Ma

Abstract: The dynamics of magnetic moments in iron-chromium alloys with different levels of Cr clustering show unusual features resulting from the fact that even in a perfect body-centred cubic structure, magnetic moments experience geometric magnetic frustration resembling that of a spin glass. Due to the long range exchange coupling and configuration randomness, magnetic moments of Cr solutes remain non-c… ▽ More The dynamics of magnetic moments in iron-chromium alloys with different levels of Cr clustering show unusual features resulting from the fact that even in a perfect body-centred cubic structure, magnetic moments experience geometric magnetic frustration resembling that of a spin glass. Due to the long range exchange coupling and configuration randomness, magnetic moments of Cr solutes remain non-collinear at all temperatures. To characterise magnetic properties of Fe-Cr alloys, we explore the temperature dependence of magnetisation, susceptibility, Curie temperature and spin-spin correlations with spatial resolution. The static and dynamic magnetic properties are correlated with the microstructure of Fe-Cr, where magnetisation and susceptibility are determined by the size of Cr precipitates at nominal Cr concentrations. The Curie temperature is always maximised when the solute concentration of Cr in the $α$ phase is close to 5 to 6 at.\%, and the susceptibility of Fe atoms is always enhanced at the boundary between a precipitate and solid solution. Interaction between Cr and Fe stimulates magnetic disorder, lowering the effective Curie temperature. Dynamic simulation of evolution of magnetic correlations shows that the spin-spin relaxation time in Fe-Cr alloys is in the 20 to 40 ps range. △ Less

Submitted 5 February, 2019; originally announced February 2019.

Comments: article consists of 16 pages with 9 figures. There is an additional Supplementary Material document

Journal ref: Phys. Rev. B 99, 184413 (2019)

The Role of Grain Boundaries under Long-Time Radiation

Authors: Yichao Zhu, Jing Luo, Xu Guo, Yang Xiang, Stephen Jonathan Chapman

Abstract: Materials containing a high proportion of grain boundaries offer significant potential for the development of radiation-resistent structural materials. However, a proper understanding of the connection between the radiation-induced microstructural behaviour of grain boundary and its impact at long natural time scales is still missing. In this letter, point defect absorption at interfaces is summar… ▽ More Materials containing a high proportion of grain boundaries offer significant potential for the development of radiation-resistent structural materials. However, a proper understanding of the connection between the radiation-induced microstructural behaviour of grain boundary and its impact at long natural time scales is still missing. In this letter, point defect absorption at interfaces is summarised by a jump Robin-type condition at a coarse-grained level, wherein the role of interface microstructure is effectively taken into account. Then a concise formula linking the sink strength of a polycrystalline aggregate with its grain size is introduced, and is well compared with experimental observation. Based on the derived model, a coarse-grained formulation incorporating the coupled evolution of grain boundaries and point defects is proposed, so as to underpin the study of long-time morphological evolution of grains induced by irradiation. Our simulation results suggest that the presence of point defect sources within a grain further accelerates its shrinking process, and radiation tends to trigger the extension of twin boundary sections. △ Less

Submitted 7 May, 2018; originally announced May 2018.

Topological data analysis of continuum percolation with disks

Authors: Leo Speidel, Heather A. Harrington, S. Jonathan Chapman, Mason A. Porter

Abstract: We study continuum percolation with disks, a variant of continuum percolation in two-dimensional Euclidean space, by applying tools from topological data analysis. We interpret each realization of continuum percolation with disks as a topological subspace of $[0,1]^2$ and investigate its topological features across many realizations. We apply persistent homology to investigate topological changes… ▽ More We study continuum percolation with disks, a variant of continuum percolation in two-dimensional Euclidean space, by applying tools from topological data analysis. We interpret each realization of continuum percolation with disks as a topological subspace of $[0,1]^2$ and investigate its topological features across many realizations. We apply persistent homology to investigate topological changes as we vary the number and radius of disks. We observe evidence that the longest persisting invariant is born at or near the percolation transition. △ Less

Submitted 20 April, 2018; originally announced April 2018.

Journal ref: Phys. Rev. E 98, 012318 (2018)

Widely tunable on-chip microwave circulator for superconducting quantum circuits

Authors: Benjamin J. Chapman, Eric I. Rosenthal, Joseph Kerckhoff, Bradley A. Moores, Leila R. Vale, Gene C. Hilton, Kevin Lalumière, Alexandre Blais, K. W. Lehnert

Abstract: We report on the design and performance of an on-chip microwave circulator with a widely (GHz) tunable operation frequency. Non-reciprocity is created with a combination of frequency conversion and delay, and requires neither permanent magnets nor microwave bias tones, allowing on-chip integration with other superconducting circuits without the need for high-bandwidth control lines. Isolation in t… ▽ More We report on the design and performance of an on-chip microwave circulator with a widely (GHz) tunable operation frequency. Non-reciprocity is created with a combination of frequency conversion and delay, and requires neither permanent magnets nor microwave bias tones, allowing on-chip integration with other superconducting circuits without the need for high-bandwidth control lines. Isolation in the device exceeds 20 dB over a bandwidth of tens of MHz, and its insertion loss is small, reaching as low as 0.9 dB at select operation frequencies. Furthermore, the device is linear with respect to input power for signal powers up to hundreds of fW ($\approx 10^3$ circulating photons), and the direction of circulation can be dynamically reconfigured. We demonstrate its operation at a selection of frequencies between 4 and 6 GHz. △ Less

Submitted 6 November, 2017; v1 submitted 14 July, 2017; originally announced July 2017.

Comments: 8 pages with 8 page appendix

Journal ref: Phys. Rev. X 7, 041043 (2017)

Improving the Functional Control of Aged Ferroelectrics using Insights from Atomistic Modelling

Authors: J. B. J. Chapman, R. E. Cohen, A. V. Kimmel, D. M. Duffy

Abstract: We provide a fundamental insight into the microscopic mechanisms of the ageing processes. Using large scale molecular dynamics simulations of the prototypical ferroelectric material PbTiO3, we demonstrate that the experimentally observed ageing phenomena can be reproduced from intrinsic interactions of defect-dipoles related to dopant-vacancy associates, even in the absence of extrinsic effects. W… ▽ More We provide a fundamental insight into the microscopic mechanisms of the ageing processes. Using large scale molecular dynamics simulations of the prototypical ferroelectric material PbTiO3, we demonstrate that the experimentally observed ageing phenomena can be reproduced from intrinsic interactions of defect-dipoles related to dopant-vacancy associates, even in the absence of extrinsic effects. We show that variation of the dopant concentration modifies the material's hysteretic response. We identify a universal method to reduce loss and tune the electromechanical properties of inexpensive ceramics for efficient technologies. △ Less

Submitted 26 May, 2017; originally announced May 2017.

Comments: 6 pages, 3 figures

Journal ref: Phys. Rev. Lett. 119, 177602 (2017)

Diffusion of particles with short-range interactions

Authors: Maria Bruna, S. Jonathan Chapman, Martin Robinson

Abstract: A system of interacting Brownian particles subject to short-range repulsive potentials is considered. A continuum description in the form of a nonlinear diffusion equation is derived systematically in the dilute limit using the method of matched asymptotic expansions. Numerical simulations are performed to compare the results of the model with those of the commonly used mean-field and Kirkwood-sup… ▽ More A system of interacting Brownian particles subject to short-range repulsive potentials is considered. A continuum description in the form of a nonlinear diffusion equation is derived systematically in the dilute limit using the method of matched asymptotic expansions. Numerical simulations are performed to compare the results of the model with those of the commonly used mean-field and Kirkwood-superposition approximations, as well as with Monte Carlo simulation of the stochastic particle system, for various interaction potentials. Our approach works best for very repulsive short-range potentials, while the mean-field approximation is suitable for long-range interactions. The Kirkwood superposition approximation provides an accurate description for both short- and long-range potentials, but is considerably more computationally intensive. △ Less

Submitted 10 October, 2017; v1 submitted 27 February, 2017; originally announced March 2017.

Single-sideband modulator for frequency domain multiplexing of superconducting qubit readout

Authors: Benjamin J. Chapman, Eric I. Rosenthal, Joseph Kerckhoff, Leila R. Vale, Gene C. Hilton, K. W. Lehnert

Abstract: We introduce and experimentally characterize a superconducting single-sideband modulator compatible with cryogenic microwave circuits, and propose its use for frequency domain multiplexing of superconducting qubit readout. The monolithic single-quadrature modulators that comprise the device are formed with purely reactive elements (capacitors and Josephson junction inductors) and require no microw… ▽ More We introduce and experimentally characterize a superconducting single-sideband modulator compatible with cryogenic microwave circuits, and propose its use for frequency domain multiplexing of superconducting qubit readout. The monolithic single-quadrature modulators that comprise the device are formed with purely reactive elements (capacitors and Josephson junction inductors) and require no microwave-frequency control tones. Microwave signals in the 4 to 8 GHz band, with power up to -85 dBm, are converted up or down in frequency by as much as 120 MHz. Spurious harmonics in the device can be suppressed by up to 25 dB for select probe and modulation frequencies. △ Less

Submitted 24 May, 2017; v1 submitted 5 March, 2017; originally announced March 2017.

Comments: 5 page main text, 6 page supplementary information

Journal ref: Chapman, B. J., Rosenthal, E. I., Kerckhoff, J., Vale, L. R., Hilton, G. C., & Lehnert, K. W. (2017). Single-sideband modulator for frequency domain multiplexing of superconducting qubit readout. Applied Physics Letters, 110(16), 162601

A Mean-Field Approach to Evolving Spatial Networks, with an Application to Osteocyte Network Formation

Authors: Jake P. Taylor-King, David Basanta, S. Jonathan Chapman, Mason A. Porter

Abstract: We consider evolving networks in which each node can have various associated properties (a state) in addition to those that arise from network structure. For example, each node can have a spatial location and a velocity, or some more abstract internal property that describes something like social trait. Edges between nodes are created and destroyed, and new nodes enter the system. We introduce a "… ▽ More We consider evolving networks in which each node can have various associated properties (a state) in addition to those that arise from network structure. For example, each node can have a spatial location and a velocity, or some more abstract internal property that describes something like social trait. Edges between nodes are created and destroyed, and new nodes enter the system. We introduce a "local state degree distribution" (LSDD) as the degree distribution at a particular point in state space. We then make a mean-field assumption and thereby derive an integro-partial differential equation that is satisfied by the LSDD. We perform numerical experiments and find good agreement between solutions of the integro-differential equation and the LSDD from stochastic simulations of the full model. To illustrate our theory, we apply it to a simple continuum model for osteocyte network formation within bones, with a view to understanding changes that may take place during cancer. Our results suggest that increased rates of differentiation lead to higher densities of osteocytes but with a lower number of dendrites. To help provide biological context, we also include an introduction to osteocytes, the formation of osteocyte networks, and the role of osteocytes in bona metastasis. △ Less

Submitted 31 January, 2017; originally announced February 2017.

Journal ref: Phys. Rev. E 96, 012301 (2017)

A study of adatom ripening on an Al (111) surface with machine learning force fields

Authors: Venkatesh Botu, James Chapman, Rampi Ramprasad

Abstract: Surface phenomena are increasingly becoming important in exploring nanoscale materials growth and characterization. Consequently, the need for atomistic based simulations is increasing. Nevertheless, relying entirely on quantum mechanical methods limits the length and time scales one can consider, resulting in an ever increasing dependence on alternative machine learning based force fields. Recent… ▽ More Surface phenomena are increasingly becoming important in exploring nanoscale materials growth and characterization. Consequently, the need for atomistic based simulations is increasing. Nevertheless, relying entirely on quantum mechanical methods limits the length and time scales one can consider, resulting in an ever increasing dependence on alternative machine learning based force fields. Recently, we proposed a machine learning approach, known as AGNI, that allows fast and accurate atomic force predictions given the atom's neighborhood environment. Here, we make use of such force fields to study and characterize the nanoscale diffusion and growth processes occurring on an Al (111) surface. In particular we focus on the adatom ripening phenomena, confirming past experimental findings, wherein a low and high temperature growth regime were observed, using entirely molecular dynamics simulations. △ Less

Submitted 14 October, 2016; originally announced October 2016.

Machine learning force fields: Construction, validation, and outlook

Authors: Venkatesh Botu, Rohit Batra, James Chapman, Rampi Ramprasad

Abstract: Force fields developed with machine learning methods in tandem with quantum mechanics are beginning to find merit, given their (i) low cost, (ii) accuracy, and (iii) versatility. Recently, we proposed one such approach, wherein, the vectorial force on an atom is computed directly from its environment. Here, we discuss the multi-step workflow required for their construction, which begins with gener… ▽ More Force fields developed with machine learning methods in tandem with quantum mechanics are beginning to find merit, given their (i) low cost, (ii) accuracy, and (iii) versatility. Recently, we proposed one such approach, wherein, the vectorial force on an atom is computed directly from its environment. Here, we discuss the multi-step workflow required for their construction, which begins with generating diverse reference atomic environments and force data, choosing a numerical representation for the atomic environments, down selecting a representative training set, and lastly the learning method itself, for the case of Al. The constructed force field is then validated by simulating complex materials phenomena such as surface melting and stress-strain behavior - that truly go beyond the realm of $ab\ initio$ methods both in length and time scales. To make such force fields truly versatile an attempt to estimate the uncertainty in force predictions is put forth, allowing one to identify areas of poor performance and paving the way for their continual improvement. △ Less

Submitted 30 October, 2016; v1 submitted 6 October, 2016; originally announced October 2016.

A mathematical model for mechanically-induced deterioration of the binder in lithium-ion electrodes

Authors: Jamie M. Foster, S. Jon Chapman, Giles Richardson, Bartosz Protas

Abstract: This study is concerned with modeling detrimental deformations of the binder phase within lithium-ion batteries that occur during cell assembly and usage. A two-dimensional poroviscoelastic model for the mechanical behavior of porous electrodes is formulated and posed on a geometry corresponding to a thin rectangular electrode, with a regular square array of microscopic circular electrode particle… ▽ More This study is concerned with modeling detrimental deformations of the binder phase within lithium-ion batteries that occur during cell assembly and usage. A two-dimensional poroviscoelastic model for the mechanical behavior of porous electrodes is formulated and posed on a geometry corresponding to a thin rectangular electrode, with a regular square array of microscopic circular electrode particles, stuck to a rigid base formed by the current collector. Deformation is forced both by (i) electrolyte absorption driven binder swelling, and; (ii) cyclic growth and shrinkage of electrode particles as the battery is charged and discharged. The governing equations are upscaled in order to obtain macroscopic effective-medium equations. A solution to these equations is obtained, in the asymptotic limit that the height of the rectangular electrode is much smaller than its width, that shows the macroscopic deformation is one-dimensional. The confinement of macroscopic deformations to one dimension is used to obtain boundary conditions on the microscopic problem for the deformations in a 'unit cell' centered on a single electrode particle. The resulting microscale problem is solved using numerical (finite element) techniques. The two different forcing mechanisms are found to cause distinctly different patterns of deformation within the microstructure. Swelling of the binder induces stresses that tend to lead to binder delamination from the electrode particle surfaces in a direction parallel to the current collector, whilst cycling causes stresses that tend to lead to delamination orthogonal to that caused by swelling. The differences between the cycling-induced damage in both: (i) anodes and cathodes, and; (ii) fast and slow cycling are discussed. Finally, the model predictions are compared to microscopy images of nickel manganese cobalt oxide cathodes and a qualitative agreement is found. △ Less

Submitted 16 January, 2018; v1 submitted 16 August, 2016; originally announced August 2016.

Comments: 25 pages, 11 figures

Journal ref: SIAM Journal on Applied Mathematics 77, 2172-2198, 2017

General purpose multiplexing device for cryogenic microwave systems

Authors: Benjamin J. Chapman, Bradley A. Moores, Eric I. Rosenthal, Joseph Kerckhoff, K. W. Lehnert

Abstract: We introduce and experimentally characterize a general purpose device for signal processing in circuit quantum electrodynamics systems. The device is a broadband two-port microwave circuit element with three modes of operation: it can transmit, reflect, or invert incident signals between 4 and 8 GHz. This property makes it a versatile tool for lossless signal processing at cryogenic temperatures.… ▽ More We introduce and experimentally characterize a general purpose device for signal processing in circuit quantum electrodynamics systems. The device is a broadband two-port microwave circuit element with three modes of operation: it can transmit, reflect, or invert incident signals between 4 and 8 GHz. This property makes it a versatile tool for lossless signal processing at cryogenic temperatures. In particular, rapid switching (less than or equal to 15 ns) between these operation modes enables several multiplexing readout protocols for superconducting qubits. We report the device's performance in a two-channel code domain multiplexing demonstration. The multiplexed data are recovered with fast readout times (up to 400 ns) and infidelities less than 0.01 for probe powers greater than 7 fW, in agreement with the expectation for binary signaling with Gaussian noise. △ Less

Submitted 31 May, 2016; v1 submitted 8 March, 2016; originally announced March 2016.

Comments: 4 pages main text, 4 pages supplementary information, 2 pages references

Journal ref: Appl. Phys. Lett. 108, 222602 (2016)

Superconductivity in potassium-doped metallic polymorphs of MoS2

Authors: Renyan Zhang, I-Ling Tsai, James Chapman, Ekaterina Khestanova, John Waters, Irina V. Grigorieva

Abstract: Superconducting layered transition metal dichalcogenides (TMDs) stand out among other superconductors due to the tunable nature of the superconducting transition, coexistence with other collective electronic excitations (charge density waves) and strong intrinsic spin-orbit coupling. Molybdenum disulphide (MoS2) is the most studied representative of this family of materials, especially since the r… ▽ More Superconducting layered transition metal dichalcogenides (TMDs) stand out among other superconductors due to the tunable nature of the superconducting transition, coexistence with other collective electronic excitations (charge density waves) and strong intrinsic spin-orbit coupling. Molybdenum disulphide (MoS2) is the most studied representative of this family of materials, especially since the recent demonstration of the possibility to tune its critical temperature, Tc, by electric-field doping. However, just one of its polymorphs, band-insulator 2H-MoS2, has so far been explored for its potential to host superconductivity. We have investigated the possibility to induce superconductivity in metallic polytypes, 1T- and 1T'-MoS2, by potassium (K) intercalation. We demonstrate that at doping levels significantly higher than that required to induce superconductivity in 2H-MoS2, both 1T and 1T' phases become superconducting, with Tc = 2.8 and 4.6K, respectively. Unusually, K intercalation in this case is responsible both for the structural and superconducting phase transitions. By adding new members to the family of superconducting TMDs our findings open the way to further manipulate and enhance the electronic properties of these technologically important materials. △ Less

Submitted 10 December, 2015; originally announced December 2015.

Comments: 13 pages, 5 figures plus 7 supplementary figures in Nano Letters, November 27, 2015

Journal ref: Nano Lett. 16, 629-636 (2016)

Superconductivity in Ca-doped graphene

Authors: J. Chapman, Y. Su, C. A. Howard, D. Kundys, A. Grigorenko, F. Guinea, A. K. Geim, I. V. Grigorieva, R. R. Nair

Abstract: Graphene, a zero-gap semimetal, can be transformed into a metallic, semiconducting or insulating state by either physical or chemical modification. Superconductivity is conspicuously missing among these states despite considerable experimental efforts as well as many theoretical proposals. Here, we report superconductivity in calcium-decorated graphene achieved by intercalation of graphene laminat… ▽ More Graphene, a zero-gap semimetal, can be transformed into a metallic, semiconducting or insulating state by either physical or chemical modification. Superconductivity is conspicuously missing among these states despite considerable experimental efforts as well as many theoretical proposals. Here, we report superconductivity in calcium-decorated graphene achieved by intercalation of graphene laminates that consist of well separated and electronically decoupled graphene crystals. In contrast to intercalated graphite, we find that Ca is the only dopant that induces superconductivity in graphene laminates above 1.8 K among intercalants used in our experiments such as potassium, caesium and lithium. Ca-decorated graphene becomes superconducting at ~ 6 K and the transition temperature is found to be strongly dependent on the confinement of the Ca layer and the induced charge carrier concentration. In addition to the first evidence for superconducting graphene, our work shows a possibility of inducing and studying superconductivity in other 2D materials using their laminates. △ Less

Submitted 27 August, 2015; originally announced August 2015.

Journal ref: Scientific Reports 6, 23254 (2016)

Direct comparison of domain wall behavior in Permalloy nanowires patterned by electron beam lithography and focused ion beam milling

Authors: M. A. Basith, S. McVitie, D. McGrouther, J. N. Chapman, J. M. R. Weaver

Abstract: Nominally identical permalloy nanowires, with widths down to 150 nm, were fabricated onto a single electron transparent Si$_{3}$N$_{4}$ membrane using electron beam lithography (EBL) and focused ion beam (FIB) milling. Transmission electron microscopy (TEM) experiments were performed to compare the nanostructures produced by these two techniques in what we believe is the first direct comparison of… ▽ More Nominally identical permalloy nanowires, with widths down to 150 nm, were fabricated onto a single electron transparent Si$_{3}$N$_{4}$ membrane using electron beam lithography (EBL) and focused ion beam (FIB) milling. Transmission electron microscopy (TEM) experiments were performed to compare the nanostructures produced by these two techniques in what we believe is the first direct comparison of fabrication techniques for nominally identical nanowires. Both EBL and FIB methods produced high quality structures with edge roughness being of the order of the mean grain size 5 -10 nm observed in the continuous films. However, significant grain growth was observed along the edges of the FIB patterned nanowires. Lorentz TEM \emph{in situ} imaging was carried out to compare the magnetic behavior of the domain walls in the patterned nanowires with anti-notches present to pin domain walls. The overall process of domain wall pinning and depinning at the anti-notches showed consistent behaviour between nanowires fabricated by the two methods with the FIB structures having slightly lower characteristic fields compared to the EBL wires. However, a significant difference was observed in the formation of a vortex structure inside the anti-notches of the EBL nanowires after depinning of the domain walls. No vortex structure was seen inside the anti-notches of the FIB patterned nanowires. Results from micromagnetic simulations suggest that the vortex structure inside the anti-notch can be suppressed if the saturation magnetization (M$_{s}$) is reduced along the nanowires edges. Whilst the two fabrication methods show that well defined structures can be produced for the dimensions considered here, the differences in the magnetic behavior for nominally identical structures may be an issue if such structures are to be used as conduits for domain walls in potential memory and logic applications. △ Less

Submitted 8 August, 2015; originally announced August 2015.

Comments: 9 pages, 8 figures

Journal ref: JOURNAL OF APPLIED PHYSICS 110, 083904 (2011)

Reproducible domain wall pinning by linear non-topographic features in a ferromagnetic nanowire

Authors: M. A. Basith, S. McVitie, D. McGrouther, J. N. Chapman

Abstract: We demonstrate that for multilayered magnetic nanowires, where the thickness and composition of the individual layers has been carefully chosen, domain walls can be pinned at non-topographic sites created purely by ion irradiation in a focused ion beam system. The pinning results from irradiation induced alloying leading to magnetic property modification only in the affected regions. Using Lorentz… ▽ More We demonstrate that for multilayered magnetic nanowires, where the thickness and composition of the individual layers has been carefully chosen, domain walls can be pinned at non-topographic sites created purely by ion irradiation in a focused ion beam system. The pinning results from irradiation induced alloying leading to magnetic property modification only in the affected regions. Using Lorentz transmission electron microscopy, we have studied the pinning behavior of domain walls at the irradiation sites. Depending on the irradiation dose, a single line feature not only pinned the domain walls but also acted to control their structure and the strength of their pinning. △ Less

Submitted 28 July, 2015; originally announced July 2015.

Comments: 5 pages, 4 figures

Journal ref: Applied Physics Letters 100, 232402 (2012)

Out-of-Plane Spin-Orientation Dependent Magnetotransport Properties in the Anisotropic Helimagnet Cr$_{1/3}$NbS$_2$

Authors: Alexander C. Bornstein, Benjamin J. Chapman, Nirmal J. Ghimire, David G. Mandrus, David S. Parker, Minhyea Lee

Abstract: Understanding the role of spin-orbit coupling (SOC) has been crucial to controlling magnetic anisotropy in magnetic multilayer films. It has been shown that electronic structure can be altered via interface SOC by varying the superlattice structure, resulting in spontaneous magnetization perpendicular or parallel to the plane. In lieu of magnetic thin films, we study the similarly anisotropic heli… ▽ More Understanding the role of spin-orbit coupling (SOC) has been crucial to controlling magnetic anisotropy in magnetic multilayer films. It has been shown that electronic structure can be altered via interface SOC by varying the superlattice structure, resulting in spontaneous magnetization perpendicular or parallel to the plane. In lieu of magnetic thin films, we study the similarly anisotropic helimagnet Cr$_{1/3}$NbS$_2$, where the spin polarization direction, controlled by the applied magnetic field, can modify the electronic structure. As a result, the direction of spin polarization can modulate the density of states, and in turn affect the in-plane electrical conductivity. In Cr$_{1/3}$NbS$_2$, we found an enhancement of in-plane conductivity when the spin polarization is out-of-plane, as compared to in-plane spin polarization. This is consistent with the increase of density of states near the Fermi energy at the same spin configuration, found from first principles calculations. We also observe unusual field dependence of the Hall signal in the same temperature range. This is unlikely to originate from the non-collinear spin texture, but rather further indicates strong dependence of electronic structure on spin orientation relative to the plane. △ Less

Submitted 3 April, 2015; originally announced April 2015.

Comments: 7 pages, 6 figures

Journal ref: Phys. Rev. B 91, 184401 (2015)

On-chip superconducting microwave circulator from synthetic rotation

Authors: Joseph Kerckhoff, Kevin Lalumière, Benjamin J. Chapman, Alexandre Blais, K. W. Lehnert

Abstract: We analyze the design of a potential replacement technology for the commercial ferrite circulators that are ubiquitous in contemporary quantum superconducting microwave experiments. The lossless, lumped element design is capable of being integrated on chip with other superconducting microwave devices, thus circumventing the many performance-limiting aspects of ferrite circulators. The design is ba… ▽ More We analyze the design of a potential replacement technology for the commercial ferrite circulators that are ubiquitous in contemporary quantum superconducting microwave experiments. The lossless, lumped element design is capable of being integrated on chip with other superconducting microwave devices, thus circumventing the many performance-limiting aspects of ferrite circulators. The design is based on the dynamic modulation of DC superconducting microwave quantum interference devices (SQUIDs) that function as nearly linear, tunable inductors. The connection to familiar ferrite-based circulators is a simple frame boost in the internal dynamics' equation of motion. In addition to the general, schematic analysis, we also give an overview of many considerations necessary to achieve a practical design with a tunable center frequency in the 4-8 GHz frequency band, a bandwidth of 240 MHz, reflections at the -20 dB level, and a maximum signal power of approximately order 100 microwave photons per inverse bandwidth. △ Less

Submitted 20 February, 2015; originally announced February 2015.

Comments: 14 pages, 7 figures

Journal ref: Phys. Rev. Applied 4, 034002 (2015)

Homogenisation of a Row of Dislocation Dipoles from Discrete Dislocation Dynamics

Authors: Stephen Jonathan Chapman, Yang Xiang, Yichao Zhu

Abstract: Conventional discrete-to-continuum approaches have seen their limitation in describing the collective behaviour of the multi-polar configurations of dislocations, which are widely observed in crystalline materials. The reason is that dislocation dipoles, which play an important role in determining the mechanical properties of crystals, often get smeared out when traditional homogenisation methods… ▽ More Conventional discrete-to-continuum approaches have seen their limitation in describing the collective behaviour of the multi-polar configurations of dislocations, which are widely observed in crystalline materials. The reason is that dislocation dipoles, which play an important role in determining the mechanical properties of crystals, often get smeared out when traditional homogenisation methods are applied. To address such difficulties, the collective behaviour of a row of dislocation dipoles is studied by using matched asymptotic techniques. The discrete-to-continuum transition is facilitated by introducing two field variables respectively describing the dislocation pair density potential and the dislocation pair width. It is found that the dislocation pair width evolves much faster than the pair density. Such hierarchy in evolution time scales enables us to describe the dislocation dynamics at the coarse-grained level by an evolution equation for the slowly varying variable (the pair density) coupled with an equilibrium equation for the fast varying variable (the pair width). The time-scale separation method adopted here paves a way for properly incorporating dipole-like (zero net Burgers vector but non-vanishing) dislocation structures, known as the statistically stored dislocations (SSDs) into macroscopic models of crystal plasticity in three dimensions. Moreover, the natural transition between different equilibrium patterns found here may also shed light on understanding the emergence of the persistent slip bands (PSBs) in fatigue metals induced by cyclic loads. △ Less

Submitted 22 January, 2016; v1 submitted 28 January, 2015; originally announced January 2015.

MSC Class: 74A60; 74N15; 41A60

Diffusion in spatially varying porous media

Authors: Maria Bruna, S. Jonathan Chapman

Abstract: The problem of diffusion in a porous medium with a spatially varying porosity is considered. The particular microstructure analyzed comprises a collection of impenetrable spheres, though the methods developed are general. Two different approaches for calculating the effective diffusion coefficient as a function of the microstructure are presented. The first is a deterministic approach based on the… ▽ More The problem of diffusion in a porous medium with a spatially varying porosity is considered. The particular microstructure analyzed comprises a collection of impenetrable spheres, though the methods developed are general. Two different approaches for calculating the effective diffusion coefficient as a function of the microstructure are presented. The first is a deterministic approach based on the method of multiple scales; the second is a stochastic approach for small volume fraction of spheres based on matched asymptotic expansions. We compare the two approaches, and we show good agreement between them in a number of example configurations. △ Less

Submitted 5 June, 2015; v1 submitted 23 January, 2015; originally announced January 2015.

Journal ref: SIAM J. APPL. MATH. Vol. 75, No. 4 (2015)

Influence of constraints on axial growth reduction of cylindrical Li-ion battery electrode particles

Authors: Jeevanjyoti Chakraborty, Colin P. Please, Alain Goriely, S. Jonathan Chapman

Abstract: Volumetric expansion of silicon anode particles in a lithium-ion battery during charging may lead to the generation of undesirable internal stresses. For a cylindrical particle such growth may also lead to failure by buckling if the expansion is constrained in the axial direction due to other particles or supporting structures. To mitigate this problem, the possibility of reducing axial growth is… ▽ More Volumetric expansion of silicon anode particles in a lithium-ion battery during charging may lead to the generation of undesirable internal stresses. For a cylindrical particle such growth may also lead to failure by buckling if the expansion is constrained in the axial direction due to other particles or supporting structures. To mitigate this problem, the possibility of reducing axial growth is investigated theoretically by studying simple modifications of the solid cylinder geometry. First, an annular cylinder is considered with lithiation either from the inside or from the outside. In both cases, the reduction of axial growth is not found to be significant. Next, explicit physical constraints are studied by addition of a non-growing elasto-plastic material: first, an outer annular constraint on a solid silicon cylinder, and second a rod-like inner constraint for an annular silicon cylinder. In both cases, it is found that axial growth can be reduced if the yield stress of the constraining material is significantly higher than that of silicon and/or the thickness of the constraint is relatively high. Phase diagrams are presented for both the outer and the inner constraint cases to identify desirable operating zones. Finally, to interpret the phase diagrams and isolate the key physical principles two different simplified models are presented and are shown to recover important qualitative trends of the numerical simulation results. △ Less

Submitted 24 November, 2014; originally announced November 2014.

Comments: 21 pages, 10 figures

Journal ref: Journal of Power Sources, 279, 746-758 (2015)

Spin Structure of the Anisotropic Helimagnet Cr$_{1/3}$NbS$_2$ in a Magnetic Field

Authors: Benjamin J. Chapman, Alexander C. Bornstein, Nirmal J. Ghimire, David Mandrus, Minhyea Lee

Abstract: In this letter we describe the ground-state magnetic structure of the highly anisotropic helimagnet Cr$_{1/3}$NbS$_2$ in a magnetic field. A Heisenberg spin model with Dyzaloshinkii-Moriya interactions and magne- tocrystalline anisotropy allows the ground state spin structure to be calculated for magnetic fields of arbitrary strength and direction. Comparison with magnetization measurements shows… ▽ More In this letter we describe the ground-state magnetic structure of the highly anisotropic helimagnet Cr$_{1/3}$NbS$_2$ in a magnetic field. A Heisenberg spin model with Dyzaloshinkii-Moriya interactions and magne- tocrystalline anisotropy allows the ground state spin structure to be calculated for magnetic fields of arbitrary strength and direction. Comparison with magnetization measurements shows excellent agreement with the predicted spin structure. △ Less

Submitted 19 August, 2014; originally announced August 2014.

Comments: accepted in Appl.Phys.Lett

Journal ref: App. Phys. Lett. 105, 072405 (2014)

Combining mechanical and chemical effects in the deformation and failure of a cylindrical electrode particle in a Li-ion battery

Authors: Jeevanjyoti Chakraborty, Colin P. Please, Alain Goriely, S. Jonathan Chapman

Abstract: A general framework to study the mechanical behaviour of a cylindrical silicon anode particle in a lithium ion battery as it undergoes lithiation is presented. The two-way coupling between stress and concentration of lithium in silicon, including the possibility of plastic deformation, is taken into account and two particular cases are considered. First, the cylindrical particle is assumed to be f… ▽ More A general framework to study the mechanical behaviour of a cylindrical silicon anode particle in a lithium ion battery as it undergoes lithiation is presented. The two-way coupling between stress and concentration of lithium in silicon, including the possibility of plastic deformation, is taken into account and two particular cases are considered. First, the cylindrical particle is assumed to be free of surface traction and second, the axial deformation of the cylinder is prevented. In both cases plastic stretches develop through the entire cylinder and not just near the surface as is commonly found in spherical anode particles. It is shown that the stress evolution depends both on the lithiation rate and the external constraints. Furthermore, as the cylinder expands during lithiation it can develop a compressive axial stress large enough to induce buckling, which in turn may lead to mechanical failure. An explicit criterion for swelling-induced buckling obtained as a modification of the classical Euler buckling criterion shows the competition between the stabilising effect of radius increase and the destabilising effect of axial stress. △ Less

Submitted 31 July, 2014; v1 submitted 30 May, 2014; originally announced May 2014.

Comments: 24 pages, 8 figures

Journal ref: Interantional Journal of Solids and Structures, 54, 66-81 (2015)

Large enhancement of emergent magnetic fields in MnSi with impurities and pressure

Authors: Benjamin J. Chapman, Maxwell G. Grossnickle, Thomas Wolf, Minhyea Lee

Abstract: We report a study of the topological Hall effect (THE) in Fe-doped MnSi and compare with results from pure MnSi under pressure. We find that Fe doping increases the THE, indicating an enhancement of the magnitude of the emergent gauge field. This is consistent with the concurrent reduction in the length scale of the skyrmion lattice. For both pressurized and doped samples, we calculate the emergen… ▽ More We report a study of the topological Hall effect (THE) in Fe-doped MnSi and compare with results from pure MnSi under pressure. We find that Fe doping increases the THE, indicating an enhancement of the magnitude of the emergent gauge field. This is consistent with the concurrent reduction in the length scale of the skyrmion lattice. For both pressurized and doped samples, we calculate the emergent magnetic field based on the size of the measured THE, and compare it with a theoretical upper-bound. We find that the ratio of these two remains more or less constant with pressure or Fe doping, but differs greatly from that of pure MnSi at ambient pressure. We discuss the implications of this ratio with respect to trends in the saturated magnetic moment and helical pitch length as T_C \rightarrow 0 via doping and pressure, respectively. △ Less

Submitted 15 January, 2014; originally announced January 2014.

Comments: 5 pages, 3 figures

Journal ref: Phys.Rev.B 88 214406 (2013)

IR-stimulated visible fluorescence in pink and brown diamond

Authors: K S Byrne, J G Chapman, A N Luiten

Abstract: Irradiation of natural pink and brown diamond by middle-ultraviolet light (photon energy > 4.1 eV) is seen to induce anomalous fluorescence phenomena at N3 defect centres (structure N3-V). When diamonds primed in this fashion are subsequently exposed to infrared light (even with a delay of many hours), a transient burst of blue N3 fluorescence is observed. The dependence of this IR-triggered fluor… ▽ More Irradiation of natural pink and brown diamond by middle-ultraviolet light (photon energy > 4.1 eV) is seen to induce anomalous fluorescence phenomena at N3 defect centres (structure N3-V). When diamonds primed in this fashion are subsequently exposed to infrared light (even with a delay of many hours), a transient burst of blue N3 fluorescence is observed. The dependence of this IR-triggered fluorescence on pump wavelength and intensity suggest that this fluorescence phenomena is intrinsically related to pink diamond photochromism. An energy transfer process between N3 defects and other defect species can account for both the UV-induced fluorescence intensity changes, and the apparent optical upconversion of IR light. From this standpoint, we consider the implications of this N3 fluorescence behaviour for the current understanding of pink diamond photochromism kinetics. △ Less

Submitted 19 December, 2013; originally announced December 2013.

Comments: 6 pages, 6 figures

Journal ref: J. Phys.: Condens. Matter 26(11) (2014) 115504

Exact time-dependent density-functional potentials for strongly correlated tunneling electrons

Authors: Matthew J. P. Hodgson, James D. Ramsden, Jacob B. J. Chapman, Piers Lillystone, Rex W Godby

Abstract: By propagating the many-body Schrödinger equation, we determine the exact time-dependent Kohn-Sham potential for a system of strongly correlated electrons which undergo field-induced tunneling. Numerous features are entirely absent from the approximations commonly used in time-dependent density-functional theory. The self-interaction correction is strong and time dependent, owing to electron local… ▽ More By propagating the many-body Schrödinger equation, we determine the exact time-dependent Kohn-Sham potential for a system of strongly correlated electrons which undergo field-induced tunneling. Numerous features are entirely absent from the approximations commonly used in time-dependent density-functional theory. The self-interaction correction is strong and time dependent, owing to electron localization, and prominent dynamic spatial potential steps arise from minima in the charge density, as modified by the Coulomb interaction experienced by the partially tunneled electron. △ Less

Submitted 9 December, 2013; originally announced December 2013.

Comments: 5 figures

Journal ref: Phys. Rev. B 88, 241102(R) (2013)

Excluded-volume effects in the diffusion of hard spheres

Authors: Maria Bruna, S. Jonathan Chapman

Abstract: Excluded-volume effects can play an important role in determining transport properties in diffusion of particles. Here, the diffusion of finite-sized hard-core interacting particles in two or three dimensions is considered systematically using the method of matched asymptotic expansions. The result is a nonlinear diffusion equation for the one-particle distribution function, with excluded-volume e… ▽ More Excluded-volume effects can play an important role in determining transport properties in diffusion of particles. Here, the diffusion of finite-sized hard-core interacting particles in two or three dimensions is considered systematically using the method of matched asymptotic expansions. The result is a nonlinear diffusion equation for the one-particle distribution function, with excluded-volume effects enhancing the overall collective diffusion rate. An expression for the effective (collective) diffusion coefficient is obtained. Stochastic simulations of the full particle system are shown to compare well with the solution of this equation for two examples. △ Less

Submitted 4 January, 2012; v1 submitted 13 December, 2010; originally announced December 2010.

Journal ref: Phys. Rev. E 85, 011103 (2012)

Microstructure of precipitates and magnetic domain structure in an annealed Co38Ni33Al29 shape memory alloy

Authors: B. Bartova, N. Wiese, D. Schryvers, J. N. Chapman, S. Ignacova

Abstract: The microstructure of a CoNiAl FSMA was determined by conventional transmission electron microscopy, electron diffraction studies together with advanced microscopy techniques and in-situ Lorentz microscopy. 10 to 60 nm sized rod-like precipitates of hcp $ε$-Co were confirmed to be present by HRTEM. The orientation relationship between the precipitates and B2 matrix is described by the Burgers or… ▽ More The microstructure of a CoNiAl FSMA was determined by conventional transmission electron microscopy, electron diffraction studies together with advanced microscopy techniques and in-situ Lorentz microscopy. 10 to 60 nm sized rod-like precipitates of hcp $ε$-Co were confirmed to be present by HRTEM. The orientation relationship between the precipitates and B2 matrix is described by the Burgers orientation relationship. The crystal structure of the martensite obtained after cooling is tetragonal L10 with a (1-11) twinning plane. The magnetic domain structure was determined during an in-situ cooling experiment using the Fresnel mode of Lorentz microscopy. While transformation proceeds from B2 austenite to L10 martensite, new domains are nucleated leading to a decrease in domain width, with the magnetization lying predominantly along a single direction. It was possible to completely describe the relationship between magnetic domains and crystallographic directions in the austenite phase though complications existed for the martensite phase. △ Less

Submitted 15 May, 2008; originally announced May 2008.

Comments: 7 pages, 11 figures, 2 tables. Manuscript accpeted for publication in Acta Materialia

Direct observation of domain wall structures in curved permalloy wires containing an anti-notch

Authors: C. W. Sandweg, N. Wiese, D. McGrouther, S. J. Hermsdoerfer, H. Schultheiss, B. Leven, S. McVitie, B. Hillebrands, J. N. Chapman

Abstract: The formation and field response of head-to-head domain walls in curved permalloy wires, fabricated to contain a single anti-notch, have been investigated using Lorentz microscopy. High spatial resolution maps of the vector induction distribution in domain walls close to the anti-notch have been derived and compared with micromagnetic simulations. In wires of 10 nm thickness the walls are typica… ▽ More The formation and field response of head-to-head domain walls in curved permalloy wires, fabricated to contain a single anti-notch, have been investigated using Lorentz microscopy. High spatial resolution maps of the vector induction distribution in domain walls close to the anti-notch have been derived and compared with micromagnetic simulations. In wires of 10 nm thickness the walls are typically of a modified asymmetric transverse wall type. Their response to applied fields tangential to the wire at the anti-notch location was studied. The way the wall structure changes depends on whether the field moves the wall away from or further into the notch. Higher fields are needed and much more distorted wall structures are observed in the latter case, indicating that the anti-notch acts as an energy barrier for the domain wall. △ Less

Submitted 13 February, 2008; originally announced February 2008.

Comments: submitted for publication in J. Appl. Phys. (5 pages, 5 figure)

Journal ref: published in J. Appl. Phys. 103, 093906 (2008)

On the scaling behaviour of cross-tie domain wall structures in patterned NiFe elements

Authors: N. Wiese, S. McVitie, J. N. Chapman, A. Capella-Kort, F. Otto

Abstract: The cross-tie domain wall structure in micrometre and sub-micrometre wide patterned elements of NiFe, and a thickness range of 30 to 70nm, has been studied by Lorentz microscopy. Whilst the basic geometry of the cross-tie repeat units remains unchanged, their density increases when the cross-tie length is constrained to be smaller than the value associated with a continuous film. This occurs whe… ▽ More The cross-tie domain wall structure in micrometre and sub-micrometre wide patterned elements of NiFe, and a thickness range of 30 to 70nm, has been studied by Lorentz microscopy. Whilst the basic geometry of the cross-tie repeat units remains unchanged, their density increases when the cross-tie length is constrained to be smaller than the value associated with a continuous film. This occurs when element widths are sufficiently narrow or when the wall is forced to move close to an edge under the action of an applied field. To a very good approximation the cross-tie density scales with the inverse of the distance between the main wall and the element edge. The experiments show that in confined structures, the wall constantly modifies its form and that the need to generate, and subsequently annihilate, extra vortex/anti-vortex pairs constitutes an additional source of hysteresis. △ Less

Submitted 10 October, 2007; originally announced October 2007.

Comments: 4 pages, 5 figures, accepted for publication in Europhysics Letters (EPL)

Journal ref: Europhys. Lett., vol. 80, p. 57003 (2007)

Diffusive and ballistic current spin-polarization in magnetron-sputtered L1o-ordered epitaxial FePt

Authors: K. M. Seemann, V. Baltz, M. MacKenzie, J. N. Chapman, B. J. Hickey, C. H. Marrows

Abstract: We report on the structural, magnetic, and electron transport properties of a L1o-ordered epitaxial iron-platinum alloy layer fabricated by magnetron-sputtering on a MgO(001) substrate. The film studied displayed a long range chemical order parameter of S~0.90, and hence has a very strong perpendicular magnetic anisotropy. In the diffusive electron transport regime, for temperatures ranging from… ▽ More We report on the structural, magnetic, and electron transport properties of a L1o-ordered epitaxial iron-platinum alloy layer fabricated by magnetron-sputtering on a MgO(001) substrate. The film studied displayed a long range chemical order parameter of S~0.90, and hence has a very strong perpendicular magnetic anisotropy. In the diffusive electron transport regime, for temperatures ranging from 2 K to 258 K, we found hysteresis in the magnetoresistance mainly due to electron scattering from magnetic domain walls. At 2 K, we observed an overall domain wall magnetoresistance of about 0.5 %. By evaluating the spin current asymmetry alpha = sigma_up / sigma_down, we were able to estimate the diffusive spin current polarization. At all temperatures ranging from 2 K to 258 K, we found a diffusive spin current polarization of > 80%. To study the ballistic transport regime, we have performed point-contact Andreev-reflection measurements at 4.2 K. We obtained a value for the ballistic current spin polarization of ~42% (which compares very well with that of a polycrystalline thin film of elemental Fe). We attribute the discrepancy to a difference in the characteristic scattering times for oppositely spin-polarized electrons, such scattering times influencing the diffusive but not the ballistic current spin polarization. △ Less

Submitted 19 July, 2007; originally announced July 2007.

Comments: 22 pages, 13 figures