-
Ballistic File diffusion of Hard-Core particles in One-Dimensional Channels: A Numerical Study
Authors:
P. M. Centres,
S. J. Manzi,
V. D. Pereyra,
S. Bustingorry
Abstract:
One-dimensional movement of interacting particles is a challenging problem where the correlation between particles induces non-trivial collective effects. In contrast to the single-file diffusion case, the pure ballistic single file movement of particles has received less attention. Here, the ballistic file diffusion of hard disks is studied using an addaptative continuum Monte Carlo numerical sch…
▽ More
One-dimensional movement of interacting particles is a challenging problem where the correlation between particles induces non-trivial collective effects. In contrast to the single-file diffusion case, the pure ballistic single file movement of particles has received less attention. Here, the ballistic file diffusion of hard disks is studied using an addaptative continuum Monte Carlo numerical scheme. Dynamics is studied as a function of the size of the particles, the system size and the number of particles. The mean square displacement presents three regimes corresponding to independent motion, collective motion and finite size effects. These regimes and the crossover times between them are analyzed and presented in analogy with the ones observed for the single-file diffusion problem.
△ Less
Submitted 23 February, 2023;
originally announced February 2023.
-
Percolation phase transition by removal of $k^{2}$-mers from fully occupied lattices
Authors:
L. S. Ramirez,
P. M. Centres,
A. J. Ramirez-Pastor
Abstract:
Numerical simulations and finite-size scaling analysis have been carried out to study the problem of inverse site percolation by the removal of $k \times k$ square tiles ($k^{2}$-mers) from square lattices. The process starts with an initial configuration, where all lattice sites are occupied and, obviously, the opposite sides of the lattice are connected by occupied sites. Then, the system is dil…
▽ More
Numerical simulations and finite-size scaling analysis have been carried out to study the problem of inverse site percolation by the removal of $k \times k$ square tiles ($k^{2}$-mers) from square lattices. The process starts with an initial configuration, where all lattice sites are occupied and, obviously, the opposite sides of the lattice are connected by occupied sites. Then, the system is diluted by removing $k^{2}$-mers of occupied sites from the lattice following a random sequential adsorption mechanism. The process finishes when the jamming state is reached and no more objects can be removed due to the absence of occupied sites clusters of appropriate size and shape. The central idea of this paper is based on finding the maximum concentration of occupied sites, $p_{c,k}$, for which the connectivity disappears. This particular value of the concentration is called \textit{inverse percolation threshold}, and determines a well-defined geometrical phase transition in the system. The results obtained for $p_{c,k}$ show that the inverse percolation threshold is a decreasing function of $k$ in the range $1 \leq k \leq 4$. For $k \geq 5$, all jammed configurations are percolating states, and consequently, there is no non-percolating phase. In other words, the lattice remains connected even when the highest allowed concentration of removed sites is reached. The jamming exponent $ν_j$ was measured, being $ν_j = 1$ regardless of the size $k$ considered. In addition, the accurate determination of the critical exponents $ν$, $β$ and $γ$ reveals that the percolation phase transition involved in the system, which occurs for $k$ varying between 1 and 4, has the same universality class as the standard percolation problem.
△ Less
Submitted 29 July, 2019;
originally announced July 2019.
-
Random sequential adsorption on Euclidean, fractal and random lattices
Authors:
Pedro M. Pasinetti,
Lucia S. Ramirez,
Paulo M. Centres,
Antonio J. Ramirez-Pastor,
Gabriel A. Cwilich
Abstract:
Irreversible adsorption of objects of different shapes and sizes on Euclidean, fractal and random lattices is studied. The adsorption process is modeled by using random sequential adsorption (RSA) algorithm. Objects are adsorbed on one-, two-, and three-dimensional Euclidean lattices, on Sierpinski carpets having dimension $d$ between 1 and 2, and on Erdos-Renyi random graphs. The number of sites…
▽ More
Irreversible adsorption of objects of different shapes and sizes on Euclidean, fractal and random lattices is studied. The adsorption process is modeled by using random sequential adsorption (RSA) algorithm. Objects are adsorbed on one-, two-, and three-dimensional Euclidean lattices, on Sierpinski carpets having dimension $d$ between 1 and 2, and on Erdos-Renyi random graphs. The number of sites is $M=L^d$ for Euclidean and fractal lattices, where $L$ is a characteristic length of the system. In the case of random graphs it does not exist such characteristic length, and the substrate can be characterized by a fixed set of $M$ vertices (sites) and an average connectivity (or degree) $g$. The paper concentrates on measuring (1) the probability $W_{L(M)}(θ)$ that a lattice composed of $L^d(M)$ elements reaches a coverage $θ$, and (2) the exponent $ν_j$ characterizing the so-called "jamming transition". The results obtained for Euclidean, fractal and random lattices indicate that the main quantities derived from the jamming probability $W_{L(M)}(θ)$ behave asymptotically as $M^{1/2}$. In the case of Euclidean and fractal lattices, where $L$ and $d$ can be defined, the asymptotic behavior can be written as $M^{1/2} = L^{d/2}=L^{1/ν_j}$, and $ν_j=2/d$.
△ Less
Submitted 4 September, 2019; v1 submitted 4 July, 2019;
originally announced July 2019.
-
Percolation of aligned rigid rods on two-dimensional triangular lattices
Authors:
P. Longone,
P. M. Centres,
A. J. Ramirez-Pastor
Abstract:
The percolation behavior of aligned rigid rods of length $k$ ($k$-mers) on two-dimensional triangular lattices has been studied by numerical simulations and finite-size scaling analysis. The $k$-mers, containing $k$ identical units (each one occupying a lattice site), were irreversibly deposited along one of the directions of the lattice. The connectivity analysis was carried out by following the…
▽ More
The percolation behavior of aligned rigid rods of length $k$ ($k$-mers) on two-dimensional triangular lattices has been studied by numerical simulations and finite-size scaling analysis. The $k$-mers, containing $k$ identical units (each one occupying a lattice site), were irreversibly deposited along one of the directions of the lattice. The connectivity analysis was carried out by following the probability $R_{L,k}(p)$ that a lattice composed of $L \times L$ sites percolates at a concentration $p$ of sites occupied by particles of size $k$. The results, obtained for $k$ ranging from 2 to 80, showed that the percolation threshold $p_c(k)$ exhibits a increasing function when it is plotted as a function of the $k$-mer size. The dependence of $p_c(k)$ was determined, being $p_c(k)=A+B/(C+\sqrt{k})$, where $A = p_c(k \rightarrow \infty)= 0.582(9)$ is the value of the percolation threshold by infinitely long $k$-mers, $B =-0.47(0.21)$ and $C = 5.79(2.18)$. This behavior is completely different to that observed for square lattices, where the percolation threshold decreases with $k$. In addition, the effect of the anisotropy on the properties of the percolating phase was investigated. The results revealed that, while for finite systems the anisotropy of the deposited layer favors the percolation along the parallel direction to the nematic axis, in the thermodynamic limit, the value of the percolation threshold is the same in both parallel and transversal directions. Finally, an exhaustive study of critical exponents and universality was carried out, showing that the phase transition occurring in the system belongs to the standard random percolation universality class regardless of the value of $k$ considered.
△ Less
Submitted 10 June, 2019;
originally announced June 2019.
-
Jamming and percolation of $k^3$-mers on simple cubic lattices
Authors:
A. C. Buchini Labayen,
P. M. Centres,
P. M. Pasinetti,
A. J. Ramirez-Pastor
Abstract:
Jamming and percolation of three-dimensional (3D) $k \times k \times k $ cubic objects ($k^3$-mers) deposited on simple cubic lattices have been studied by numerical simulations complemented with finite-size scaling theory. The $k^3$-mers were irreversibly deposited into the lattice. Jamming coverage $θ_{j,k}$ was determined for a wide range of $k$ ($2 \leq k \leq 40$). $θ_{j,k}$ exhibits a decrea…
▽ More
Jamming and percolation of three-dimensional (3D) $k \times k \times k $ cubic objects ($k^3$-mers) deposited on simple cubic lattices have been studied by numerical simulations complemented with finite-size scaling theory. The $k^3$-mers were irreversibly deposited into the lattice. Jamming coverage $θ_{j,k}$ was determined for a wide range of $k$ ($2 \leq k \leq 40$). $θ_{j,k}$ exhibits a decreasing behavior with increasing $k$, being $θ_{j,k=\infty}=0.4204(9)$ the limit value for large $k^3$-mer sizes. In addition, a finite-size scaling analysis of the jamming transition was carried out, and the corresponding spatial correlation length critical exponent $ν_j$ was measured, being $ν_j \approx 3/2$. On the other hand, the obtained results for the percolation threshold $θ_{p,k}$ showed that $θ_{p,k}$ is an increasing function of $k$ in the range $2 \leq k \leq 16$. For $k \geq 17$, all jammed configurations are non-percolating states, and consequently, the percolation phase transition disappears. The interplay between the percolation and the jamming effects is responsible for the existence of a maximum value of $k$ (in this case, $k = 16$) from which the percolation phase transition no longer occurs. Finally, a complete analysis of critical exponents and universality has been done, showing that the percolation phase transition involved in the system has the same universality class as the 3D random percolation, regardless of the size $k$ considered.
△ Less
Submitted 27 May, 2019;
originally announced May 2019.
-
Jamming and percolation of $k^2$-mers on simple cubic lattices
Authors:
P. M. Pasinetti,
P. M. Centres,
A. J. Ramirez-Pastor
Abstract:
Jamming and percolation of square objects of size $k \times k$ ($k^2$-mers) isotropically deposited on simple cubic lattices have been studied by numerical simulations complemented with finite-size scaling theory. The $k^2$-mers were irreversibly deposited into the lattice. Jamming coverage $θ_{j,k}$ was determined for a wide range of $k$ ($2 \leq k \leq 200$). $θ_{j,k}$ exhibits a decreasing beha…
▽ More
Jamming and percolation of square objects of size $k \times k$ ($k^2$-mers) isotropically deposited on simple cubic lattices have been studied by numerical simulations complemented with finite-size scaling theory. The $k^2$-mers were irreversibly deposited into the lattice. Jamming coverage $θ_{j,k}$ was determined for a wide range of $k$ ($2 \leq k \leq 200$). $θ_{j,k}$ exhibits a decreasing behavior with increasing $k$, being $θ_{j,k\rightarrow\infty}=0.4285(6)$ the limit value for large $k^2$-mer sizes. On the other hand, the obtained results shows that percolation threshold, $θ_{c,k}$, has a strong dependence on $k$. It is a decreasing function in the range $2 \leq k \leq 18$ with a minimum around $k=18$ and, for $k \geq 18$, it increases smoothly towards a saturation value. Finally, a complete analysis of critical exponents and universality has been done, showing that the percolation phase transition involved in the system has the same universality class as the 3D random percolation, regardless of the size $k$ considered.
△ Less
Submitted 27 May, 2019;
originally announced May 2019.
-
Random sequential adsorption of straight rigid rods on a simple cubic lattice
Authors:
G. D. García,
F. O. Sanchez-Varretti,
P. M. Centres,
A. J. Ramirez-Pastor
Abstract:
Random sequential adsorption of straight rigid rods of length $k$ ($k$-mers) on a simple cubic lattice has been studied by numerical simulations and finite-size scaling analysis. The calculations were performed by using a new theoretical scheme, whose accuracy was verified by comparison with rigorous analytical data. The results, obtained for \textit{k} ranging from 2 to 64, revealed that (i) in t…
▽ More
Random sequential adsorption of straight rigid rods of length $k$ ($k$-mers) on a simple cubic lattice has been studied by numerical simulations and finite-size scaling analysis. The calculations were performed by using a new theoretical scheme, whose accuracy was verified by comparison with rigorous analytical data. The results, obtained for \textit{k} ranging from 2 to 64, revealed that (i) in the case of dimers ($k=2$), the jamming coverage is $θ_j=0.918388(16)$. Our estimate of $θ_j$ differs significantly from the previously reported value of $θ_j=0.799(2)$ [Y. Y. Tarasevich and V. A. Cherkasova, Eur. Phys. J. B \textbf{60}, 97 (2007)]; (ii) $θ_j$ exhibits a decreasing function when it is plotted in terms of the $k$-mer size, being $θ_j (\infty)= 0.4045(19)$ the value of the limit coverage for large $k$'s; and (iii) the ratio between percolation threshold and jamming coverage shows a non-universal behavior, monotonically decreasing with increasing $k$.
△ Less
Submitted 25 January, 2015;
originally announced January 2015.
-
Effective Edwards-Wilkinson equation for single-file diffusion
Authors:
P. M. Centres,
S. Bustingorry
Abstract:
In this work, we present an effective discrete Edwards-Wilkinson equation aimed to describe the single-file diffusion process. The key physical properties of the system are captured defining an effective elasticity, which is proportional to the single particle diffusion coefficient and to the inverse squared mean separation between particles. The effective equation gives a description of single-fi…
▽ More
In this work, we present an effective discrete Edwards-Wilkinson equation aimed to describe the single-file diffusion process. The key physical properties of the system are captured defining an effective elasticity, which is proportional to the single particle diffusion coefficient and to the inverse squared mean separation between particles. The effective equation gives a description of single-file diffusion using the global roughness of the system of particles, which presents three characteristic regimes, namely normal diffusion, subdiffusion and saturation, separated by two crossover times. We show how these regimes scale with the parameters of the original system. Additional repulsive interaction terms are also considered and we analyze how the crossover times depend on the intensity of the additional terms. Finally, we show that the roughness distribution can be well characterized by the Edwards-Wilkinson universal form for the different single-file diffusion processes studied here.
△ Less
Submitted 3 June, 2010;
originally announced June 2010.
