-
Nucleation of frictional slip: A yielding or a fracture process?
Authors:
Miguel Castellano,
Flavio Lorez,
David Kammer
Abstract:
The onset of frictional sliding between contacting bodies under shear load is nucleated by the quasi-static growth of localized slip patches. After reaching a certain critical size, these patches become unstable and continue growing dynamically, eventually causing the sliding of the entire interface. Two different theories have been used to compute the nucleation length of such patches depending o…
▽ More
The onset of frictional sliding between contacting bodies under shear load is nucleated by the quasi-static growth of localized slip patches. After reaching a certain critical size, these patches become unstable and continue growing dynamically, eventually causing the sliding of the entire interface. Two different theories have been used to compute the nucleation length of such patches depending on the dominant process driving their growth. If it is only the yielding of contact asperities (large-scale yielding), a stress criterion is applied, based on linear stability analysis, whereas if fracture dominates, an energy criterion is applied, based on fracture mechanics and classical nucleation theory. Both approaches contain important underlying assumptions that are well-suited to describe either one situation or the other. However, what happens in-between is not captured by any of them. In this work, we use numerical simulations to study what is the dominant underlying process driving nucleation for different conditions of heterogeneity and what are the implications for nucleation dynamics and the onset of frictional sliding. We show that large frictional heterogeneities enable a transition from a yielding-driven nucleation phase to a fracture-driven one. This transition occurs only above a certain level of heterogeneity and can either be quasi-static (stable) or dynamic (unstable), depending on the correlation length of frictional strength along the interface and the difference in strength between the strongest and the weakest point (the amplitude). Unstable transitions generate localized dynamic slip events, whose magnitude increases with higher correlation length and decreases with larger amplitude. Our work sheds new light on the role of heterogeneity and fracture in the nucleation of frictional slip, bridging the gap between the two main governing theories for nucleation.
△ Less
Submitted 16 September, 2022;
originally announced September 2022.
-
Kinetic Inductance Detectors and readout electronics for the OLIMPO experiment
Authors:
A. Paiella,
E. S. Battistelli,
M. G. Castellano,
I. Colantoni,
F. Columbro,
A. Coppolecchia,
G. D'Alessandro,
P. de Bernardis,
S. Gordon,
L. Lamagna,
H. Mani,
S. Masi,
P. Mauskopf,
G. Pettinari,
F. Piacentini,
G. Presta
Abstract:
Kinetic Inductance Detectors (KIDs) are superconductive low$-$temperature detectors useful for astrophysics and particle physics. We have developed arrays of lumped elements KIDs (LEKIDs) sensitive to microwave photons, optimized for the four horn-coupled focal planes of the OLIMPO balloon-borne telescope, working in the spectral bands centered at 150 GHz, 250 GHz, 350 GHz, and 460 GHz. This is ai…
▽ More
Kinetic Inductance Detectors (KIDs) are superconductive low$-$temperature detectors useful for astrophysics and particle physics. We have developed arrays of lumped elements KIDs (LEKIDs) sensitive to microwave photons, optimized for the four horn-coupled focal planes of the OLIMPO balloon-borne telescope, working in the spectral bands centered at 150 GHz, 250 GHz, 350 GHz, and 460 GHz. This is aimed at measuring the spectrum of the Sunyaev-Zel'dovich effect for a number of galaxy clusters, and will validate LEKIDs technology in a space-like environment. Our detectors are optimized for an intermediate background level, due to the presence of residual atmosphere and room--temperature optical system and they operate at a temperature of 0.3 K. The LEKID planar superconducting circuits are designed to resonate between 100 and 600 MHz, and to match the impedance of the feeding waveguides; the measured quality factors of the resonators are in the $10^{4}-10^{5}$ range, and they have been tuned to obtain the needed dynamic range. The readout electronics is composed of a $cold$ $part$, which includes a low noise amplifier, a dc$-$block, coaxial cables, and power attenuators; and a $room-temperature$ $part$, FPGA$-$based, including up and down-conversion microwave components (IQ modulator, IQ demodulator, amplifiers, bias tees, attenuators). In this contribution, we describe the optimization, fabrication, characterization and validation of the OLIMPO detector system.
△ Less
Submitted 3 April, 2019;
originally announced April 2019.
-
Strong nonlinear terahertz response induced by Dirac surface states in Bi2Se3 Topological Insulator
Authors:
Flavio Giorgianni,
Enrica Chiadroni,
Andrea Rovere,
Mariangela Cestelli-Guidi,
Andrea Perucchi,
Marco Bellaveglia,
Michele Castellano,
Domenico Di Giovenale,
Giampiero Di Pirro,
Massimo Ferrario,
Riccardo Pompili,
Cristina Vaccarezza,
Fabio Villa,
Alessandro Cianchi,
Andrea Mostacci,
Massimo Petrarca,
Matthew Brahlek,
Nikesh Koirala,
Sean Oh,
Stefano Lupi
Abstract:
Electrons with a linear energy/momentum dispersion are called massless Dirac electrons and represent the low-energy excitations in exotic materials like Graphene and Topological Insulators (TIs). Dirac electrons are characterized by notable properties like a high mobility, a tunable density and, in TIs, a protection against backscattering through the spin-momentum looking mechanism. All those prop…
▽ More
Electrons with a linear energy/momentum dispersion are called massless Dirac electrons and represent the low-energy excitations in exotic materials like Graphene and Topological Insulators (TIs). Dirac electrons are characterized by notable properties like a high mobility, a tunable density and, in TIs, a protection against backscattering through the spin-momentum looking mechanism. All those properties make Graphene and TIs appealling for plasmonics applications. However, Dirac electrons are expected to present also a strong nonlinear optical behavior. This should mirror in phenomena like electromagnetic induced transparency (EIT) and harmonic generation. Here, we demonstrate that in Bi2Se3 Topological Insulator, an EIT is achieved under the application of a strong terahertz (THz) electric field. This effect, concomitant determined by harmonic generation and charge-mobility reduction, is exclusively related to the presence of Dirac electron at the surface of Bi2Se_3, and opens the road towards tunable THz nonlinear optical devices based on Topological Insulator materials.
△ Less
Submitted 8 May, 2018;
originally announced May 2018.
-
Development of Lumped Element Kinetic Inductance Detectors for the W-Band
Authors:
A. Paiella,
A. Coppolecchia,
M. G. Castellano,
I. Colantoni,
A. Cruciani,
A. D'Addabbo,
P. de Bernardis,
S. Masi,
G. Presta
Abstract:
We are developing a Lumped Element Kinetic Inductance Detector (LEKID) array able to operate in the W-band (75-110 GHz) in order to perform ground-based Cosmic Microwave Background (CMB) and mm-wave astronomical observations. The W-band is close to optimal in terms of contamination of the CMB from Galactic synchrotron, free-free, and thermal interstellar dust. In this band, the atmosphere has very…
▽ More
We are developing a Lumped Element Kinetic Inductance Detector (LEKID) array able to operate in the W-band (75-110 GHz) in order to perform ground-based Cosmic Microwave Background (CMB) and mm-wave astronomical observations. The W-band is close to optimal in terms of contamination of the CMB from Galactic synchrotron, free-free, and thermal interstellar dust. In this band, the atmosphere has very good transparency, allowing interesting ground-based observations with large (>30 m) telescopes, achieving high angular resolution (<0.4 arcmin). In this work we describe the startup measurements devoted to the optimization of a W-band camera/spectrometer prototype for large aperture telescopes like the 64 m SRT (Sardinia Radio Telescope). In the process of selecting the best superconducting film for the LEKID, we characterized a 40 nm thick Aluminum 2-pixel array. We measured the minimum frequency able to break CPs (i.e. $hν=2Δ\left(T_{c}\right)=3.5k_{B}T_{c}$) obtaining $ν=95.5$ GHz, that corresponds to a critical temperature of 1.31 K. This is not suitable to cover the entire W-band. For an 80 nm layer the minimum frequency decreases to 93.2 GHz, which corresponds to a critical temperature of 1.28 K; this value is still suboptimal for W-band operation. Further increase of the Al film thickness results in bad performance of the detector. We have thus considered a Titanium-Aluminum bi-layer (10 nm thick Ti + 25 nm thick Al, already tested in other laboratories), for which we measured a critical temperature of 820 mK and a cut-on frequency of 65 GHz: so this solution allows operation in the entire W-band.
△ Less
Submitted 7 January, 2016;
originally announced January 2016.
-
Resonant effects in a SQUID qubit subjected to non adiabatic changes
Authors:
F. Chiarello,
S. Spilla,
M. G. Castellano,
C. Cosmelli,
A. Messina,
R. Migliore,
A. Napoli,
G. Torrioli
Abstract:
By quickly modifying the shape of the effective potential of a double SQUID flux qubit from a single-well to a double-well condition, we experimentally observe an anomalous behavior, namely an alternance of resonance peaks, in the probability to find the qubit in a given flux state. The occurrence of Landau-Zener transitions as well as resonant tunneling between degenerate levels in the two wells…
▽ More
By quickly modifying the shape of the effective potential of a double SQUID flux qubit from a single-well to a double-well condition, we experimentally observe an anomalous behavior, namely an alternance of resonance peaks, in the probability to find the qubit in a given flux state. The occurrence of Landau-Zener transitions as well as resonant tunneling between degenerate levels in the two wells may be invoked to partially justify the experimental results. A quantum simulation of the time evolution of the system indeed suggests that the observed anomalous behavior can be imputable to quantum coherence effects. The interplay among all these mechanisms has a practical implication for quantum computing purposes, giving a direct measurement of the limits on the sweeping rates possible for a correct manipulation of the qubit state by means of fast flux pulses, avoiding transitions to non-computational states.
△ Less
Submitted 12 March, 2014; v1 submitted 21 October, 2013;
originally announced October 2013.
-
Characterization of Anomalous Pair Currents in Josephson Junction Networks
Authors:
I. Ottaviani,
M. Lucci,
R. Menditto,
V. Merlo,
M. Salvato,
M. Cirillo F. Mueller,
T. Weimann,
M. G. Castellano,
F. Chiarello,
G. Torrioli,
R. Russo
Abstract:
Measurements performed on superconductive networks shaped in the form of planar graphs display anomalously large currents when specific branches are biased. The temperature dependencies of these currents evidence that their origin is due to Cooper pair hopping through the Josephson junctions connecting the superconductive islands of the array. The experimental data are discussed in terms of a theo…
▽ More
Measurements performed on superconductive networks shaped in the form of planar graphs display anomalously large currents when specific branches are biased. The temperature dependencies of these currents evidence that their origin is due to Cooper pair hopping through the Josephson junctions connecting the superconductive islands of the array. The experimental data are discussed in terms of a theoretical model which predicts, for the system under consideration, an inhomogeneous Cooper pair distribution on the superconductive islands of the network.
△ Less
Submitted 11 September, 2013;
originally announced September 2013.
-
Artificial Neural Network based on SQUIDs: demonstration of network training and operation
Authors:
F. Chiarello,
P. Carelli,
M. G. Castellano,
G. Torrioli
Abstract:
We propose a scheme for the realization of artificial neural networks based on Superconducting Quantum Interference Devices (SQUIDs). In order to demonstrate the operation of this scheme we designed and successfully tested a small network that implements a XOR gate and is trained by means of examples. The proposed scheme can be particularly convenient as support for superconducting applications su…
▽ More
We propose a scheme for the realization of artificial neural networks based on Superconducting Quantum Interference Devices (SQUIDs). In order to demonstrate the operation of this scheme we designed and successfully tested a small network that implements a XOR gate and is trained by means of examples. The proposed scheme can be particularly convenient as support for superconducting applications such as detectors for astrophysics, high energy experiments, medicine imaging and so on.
△ Less
Submitted 30 September, 2013; v1 submitted 7 May, 2012;
originally announced May 2012.
-
Superconducting qubit manipulated by fast pulses: experimental observation of distinct decoherence regimes
Authors:
F. Chiarello,
E. Paladino,
M. G. Castellano,
C. Cosmelli,
A. D'Arrigo,
G. Torrioli,
G. Falci
Abstract:
A particular superconducting quantum interference device (SQUID)qubit, indicated as double SQUID qubit, can be manipulated by rapidly modifying its potential with the application of fast flux pulses. In this system we observe coherent oscillations exhibiting non-exponential decay, indicating a non trivial decoherence mechanism. Moreover, by tuning the qubit in different conditions (different oscil…
▽ More
A particular superconducting quantum interference device (SQUID)qubit, indicated as double SQUID qubit, can be manipulated by rapidly modifying its potential with the application of fast flux pulses. In this system we observe coherent oscillations exhibiting non-exponential decay, indicating a non trivial decoherence mechanism. Moreover, by tuning the qubit in different conditions (different oscillation frequencies) by changing the pulse height, we observe a crossover between two distinct decoherence regimes and the existence of an "optimal" point where the qubit is only weakly sensitive to intrinsic noise. We find that this behaviour is in agreement with a model considering the decoherence caused essentially by low frequency noise contributions, and discuss the experimental results and possible issues.
△ Less
Submitted 7 October, 2011;
originally announced October 2011.
-
A tunable rf SQUID manipulated as flux and phase qubit
Authors:
S Poletto,
F Chiarello,
M G Castellano,
J Lisenfeld,
A Lukashenko,
P Carelli,
A V Ustinov
Abstract:
We report on two different manipulation procedures of a tunable rf SQUID. First, we operate this system as a flux qubit, where the coherent evolution between the two flux states is induced by a rapid change of the energy potential, turning it from a double well into a single well. The measured coherent Larmor-like oscillation of the retrapping probability in one of the wells has a frequency rang…
▽ More
We report on two different manipulation procedures of a tunable rf SQUID. First, we operate this system as a flux qubit, where the coherent evolution between the two flux states is induced by a rapid change of the energy potential, turning it from a double well into a single well. The measured coherent Larmor-like oscillation of the retrapping probability in one of the wells has a frequency ranging from 6 to 20 GHz, with a theoretically expected upper limit of 40 GHz. Furthermore, here we also report a manipulation of the same device as a phase qubit. In the phase regime, the manipulation of the energy states is realized by applying a resonant microwave drive. In spite of the conceptual difference between these two manipulation procedures, the measured decay times of Larmor oscillation and microwave-driven Rabi oscillation are rather similar. Due to the higher frequency of the Larmor oscillations, the microwave-free qubit manipulation allows for much faster coherent operations.
△ Less
Submitted 23 October, 2009;
originally announced October 2009.
-
Deep-well ultrafast manipulation of a SQUID flux qubit
Authors:
M G Castellano,
F Chiarello,
P Carelli,
C Cosmelli,
F Mattioli,
G Torrioli
Abstract:
Superconducting devices based on the Josephson effect are effectively used for the implementation of qubits and quantum gates. The manipulation of superconducting qubits is generally performed by using microwave pulses with frequencies from 5 to 15 GHz, obtaining a typical operating clock from 100MHz to 1GHz. A manipulation based on simple pulses in the absence of microwaves is also possible. In…
▽ More
Superconducting devices based on the Josephson effect are effectively used for the implementation of qubits and quantum gates. The manipulation of superconducting qubits is generally performed by using microwave pulses with frequencies from 5 to 15 GHz, obtaining a typical operating clock from 100MHz to 1GHz. A manipulation based on simple pulses in the absence of microwaves is also possible. In our system a magnetic flux pulse modifies the potential of a double SQUID qubit from a symmetric double well to a single deep well condition. By using this scheme with a Nb/AlOx/Nb system we obtained coherent oscillations with sub-nanosecond period (tunable from 50ps to 200ps), very fast with respect to other manipulating procedures, and with a coherence time up to 10ns, of the order of what obtained with similar devices and technologies but using microwave manipulation. We introduce the ultrafast manipulation presenting experimental results, new issues related to this approach (such as the use of a feedback procedure for cancelling the effect of "slow" fluctuations), and open perspectives, such as the possible use of RSFQ logic for the qubit control.
△ Less
Submitted 19 March, 2010; v1 submitted 14 September, 2009;
originally announced September 2009.
-
Coherent Activation of Zero-Field Fiske Modes in Arrays of Josephson Junctions
Authors:
I. Ottaviani,
M. Cirillo,
M. Lucci,
V. Merlo,
M. Salvato,
M. G. Castellano,
G. Torrioli,
F. Mueller,
T. Weimann
Abstract:
Series arrays of Josephson junctions show evidence of a mode in which all the junctions oscillate in synchronism on voltage resonances appearing, in zero external magnetic field, at multiples of the fundamental Fiske step spacing. The measurements show that the current amplitude of the resonances increases linearly as their voltages are summed. Investigation of the nature of the coherent mode by…
▽ More
Series arrays of Josephson junctions show evidence of a mode in which all the junctions oscillate in synchronism on voltage resonances appearing, in zero external magnetic field, at multiples of the fundamental Fiske step spacing. The measurements show that the current amplitude of the resonances increases linearly as their voltages are summed. Investigation of the nature of the coherent mode by magnetic field responses of arrays and isolated juctions reveals that the oscillations take place in a parameter plane region where dc magnetic fields only activate boundary current and flux-quanta dynamics can take place.
△ Less
Submitted 26 November, 2008;
originally announced November 2008.
-
Coherent oscillations in a superconducting tunable flux qubit manipulated without microwaves
Authors:
S. Poletto,
F. Chiarello,
M. G. Castellano,
J. Lisenfeld,
A. Lukashenko,
C. Cosmelli,
G. Torrioli,
P. Carelli,
A. V. Ustinov
Abstract:
We experimentally demonstrate the coherent oscillations of a tunable superconducting flux qubit by manipulating its energy potential with a nanosecond-long pulse of magnetic flux. The occupation probabilities of two persistent current states oscillate at a frequency ranging from 6 GHz to 21 GHz, tunable via the amplitude of the flux pulse. The demonstrated operation mode allows to realize quantu…
▽ More
We experimentally demonstrate the coherent oscillations of a tunable superconducting flux qubit by manipulating its energy potential with a nanosecond-long pulse of magnetic flux. The occupation probabilities of two persistent current states oscillate at a frequency ranging from 6 GHz to 21 GHz, tunable via the amplitude of the flux pulse. The demonstrated operation mode allows to realize quantum gates which take less than 100 ps time and are thus much faster compared to other superconducting qubits. An other advantage of this type of qubit is its insensitivity to both thermal and magnetic field fluctuations.
△ Less
Submitted 8 September, 2008;
originally announced September 2008.
-
Catastrophe observation in a Josephson junction system
Authors:
M. G. Castellano,
F. Chiarello,
R. Leoni,
F. Mattioli,
G. Torrioli,
P. Carelli,
M. Cirillo,
C. Cosmelli,
A. de Waard,
G. Frossati,
N. Grønbech-Jensen,
S. Poletto
Abstract:
We report on a direct quantitative comparison between Thom's general catastrophe theory for systems presenting discontinuous behavior and experimental reality. It is demonstrated that the model provides a striking quantitative description of the measured experimental features of the complex nonlinear system generating the most appealing class of sensors and devices nowadays used in experiments,…
▽ More
We report on a direct quantitative comparison between Thom's general catastrophe theory for systems presenting discontinuous behavior and experimental reality. It is demonstrated that the model provides a striking quantitative description of the measured experimental features of the complex nonlinear system generating the most appealing class of sensors and devices nowadays used in experiments, namely the Superconducting Quantum Interference Devices (SQUIDs). The parameter space of the SQUID system that we investigate displays all the features associated with a butterfly catastrophe, namely a catastrophe expected for a system having four control parameters and one state variable.
△ Less
Submitted 5 May, 2009; v1 submitted 2 September, 2006;
originally announced September 2006.
-
Static flux bias of a flux qubit using persistent current trapping
Authors:
Maria Gabriella Castellano,
Fabio Chiarello,
Guido Torrioli,
Pasquale Carelli
Abstract:
Qubits based on the magnetic flux degree of freedom require a flux bias, whose stability and precision strongly affect the qubit performance, up to a point of forbidding the qubit operation. Moreover, in the perspective of multiqubit systems, it must be possible to flux-bias each qubit independently, hence avoiding the traditional use of externally generated magnetic fields in favour of on-chip…
▽ More
Qubits based on the magnetic flux degree of freedom require a flux bias, whose stability and precision strongly affect the qubit performance, up to a point of forbidding the qubit operation. Moreover, in the perspective of multiqubit systems, it must be possible to flux-bias each qubit independently, hence avoiding the traditional use of externally generated magnetic fields in favour of on-chip techniques that minimize cross-couplings. The solution discussed in this paper exploits a persistent current, trapped in a superconducting circuit integrated on chip that can be inductively coupled with an individual qubit. The circuit does not make use of resistive elements that can be detrimental for the qubit coherence. The trapping procedure allows to control and change stepwise the amount of stored current; after that, the circuit can be completely disconnected from the external sources. We show in a practical case how this works and how to drive the bias circuit at the required value.
△ Less
Submitted 1 September, 2006; v1 submitted 4 August, 2006;
originally announced August 2006.
-
Characterization of a fabrication process for the integration of superconducting qubits and RSFQ circuits
Authors:
Maria Gabriella Castellano,
Leif Gronberg,
Pasquale Carelli,
Fabio Chiarello,
Carlo Cosmelli,
Roberto Leoni,
Stefano Poletto,
Guido Torrioli,
Juha Hassel,
Panu Helisto
Abstract:
In order to integrate superconducting qubits with rapid-single-flux-quantum (RSFQ) control circuitry, it is necessary to develop a fabrication process that fulfills at the same time the requirements of both elements: low critical current density, very low operating temperature (tens of milliKelvin) and reduced dissipation on the qubit side; high operation frequency, large stability margins, low…
▽ More
In order to integrate superconducting qubits with rapid-single-flux-quantum (RSFQ) control circuitry, it is necessary to develop a fabrication process that fulfills at the same time the requirements of both elements: low critical current density, very low operating temperature (tens of milliKelvin) and reduced dissipation on the qubit side; high operation frequency, large stability margins, low dissipated power on the RSFQ side. For this purpose, VTT has developed a fabrication process based on Nb trilayer technology, which allows the on-chip integration of superconducting qubits and RSFQ circuits even at very low temperature. Here we present the characterization (at 4.2 K) of the process from the point of view of the Josephson devices and show that they are suitable to build integrated superconducting qubits.
△ Less
Submitted 24 April, 2006;
originally announced April 2006.
-
Superconducting tunable flux qubit with direct readout scheme
Authors:
Fabio Chiarello,
Pasquale Carelli,
Maria Gabriella Castellano,
Carlo Cosmelli,
Lorenzo Gangemi,
Roberto Leoni,
Stefano Poletto,
Daniela Simeone,
Guido Torrioli
Abstract:
We describe a simple and efficient scheme for the readout of a tunable flux qubit, and present preliminary experimental tests for the preparation, manipulation and final readout of the qubit state, performed in incoherent regime at liquid Helium temperature. The tunable flux qubit is realized by a double SQUID with an extra Josephson junction inserted in the large superconducting loop, and the r…
▽ More
We describe a simple and efficient scheme for the readout of a tunable flux qubit, and present preliminary experimental tests for the preparation, manipulation and final readout of the qubit state, performed in incoherent regime at liquid Helium temperature. The tunable flux qubit is realized by a double SQUID with an extra Josephson junction inserted in the large superconducting loop, and the readout is performed by applying a current ramp to the junction and recording the value for which there is a voltage response, depending on the qubit state. This preliminary work indicates the feasibility and efficiency of the scheme.
△ Less
Submitted 24 June, 2005;
originally announced June 2005.
-
Anomalous thermal escape in Josephson systems perturbed by microwaves
Authors:
N. Grønbech-Jensen,
M. G. Castellano,
F. Chiarello,
M. Cirillo,
C. Cosmelli,
V. Merlo,
R. Russo,
G. Torrioli
Abstract:
We investigate, by experiments and numerical simulations, thermal activation processes of Josephson tunnel junctions in the presence of microwave radiation. When the applied signal resonates with the Josephson plasma frequency oscillations, the switching current may become multi-valued temperature ranges both below and above the the classical to quantum crossover temperature. Switching current d…
▽ More
We investigate, by experiments and numerical simulations, thermal activation processes of Josephson tunnel junctions in the presence of microwave radiation. When the applied signal resonates with the Josephson plasma frequency oscillations, the switching current may become multi-valued temperature ranges both below and above the the classical to quantum crossover temperature. Switching current distributions are obtained both experimentally and numerically at temperatures both near and far above the quantum crossover temperature. Plots of the switching currents traced as a function of the applied signal frequency show very good agreement with a simple anharmonic theory for Josephson resonance frequency as a function of bias current. Throughout, experimental results and direct numerical simulations of the corresponding thermally driven classical Josephson junction model show very good agreement.
△ Less
Submitted 26 December, 2004;
originally announced December 2004.
-
Controllable Flux Coupling for the Integration of Flux Qubits
Authors:
C. Cosmelli,
M. G. Castellano,
F. Chiarello,
R. Leoni,
D. Simeone,
G. Torrioli,
P. Carelli
Abstract:
We show a novel method for controlling the coupling of flux-based qubits by means of a superconducting transformer with variable flux transfer function. The device is realized by inserting a small hysteretic dc SQUID with unshunted junctions, working as a Josephson junction with flux controlled critical current, in parallel to a superconducting transformer; by varying the magnetic flux coupled t…
▽ More
We show a novel method for controlling the coupling of flux-based qubits by means of a superconducting transformer with variable flux transfer function. The device is realized by inserting a small hysteretic dc SQUID with unshunted junctions, working as a Josephson junction with flux controlled critical current, in parallel to a superconducting transformer; by varying the magnetic flux coupled to the dc-SQUID, the transfer function for the flux coupled to the transformer can be varied. Measurements carried out on a prototype at 4.2 K show a reduction factor of about 30 between the 'on' and the 'off' states. We discuss the system characteristics and the experimental results.
△ Less
Submitted 29 March, 2004;
originally announced March 2004.
-
Microwave-induced thermal escape in Josephson junctions
Authors:
N. Gronbech-Jensen,
M. G. Castellano,
F. Chiarello,
G. Torrioli,
M. Cirillo,
L. Filippenko,
R. Russo,
C. Cosmelli
Abstract:
We investigate, by experiments and numerical simulations, thermal activation processes of Josephson tunnel junctions in the presence of microwave radiation. When the applied signal resonates with the Josephson plasma frequency oscillations, the switching current may become multi-valued in a temperature range far exceeding the classical to quantum crossover temperature. Plots of the switching cur…
▽ More
We investigate, by experiments and numerical simulations, thermal activation processes of Josephson tunnel junctions in the presence of microwave radiation. When the applied signal resonates with the Josephson plasma frequency oscillations, the switching current may become multi-valued in a temperature range far exceeding the classical to quantum crossover temperature. Plots of the switching currents traced as a function of the applied signal frequency show very good agreement with the functional forms expected from Josephson plasma frequency dependencies on the bias current. Throughout, numerical simulations of the corresponding thermally driven classical Josephson junction model show very good agreement with the experimental data.
△ Less
Submitted 9 March, 2004;
originally announced March 2004.
-
Dissipative Dynamics of an Open Bose Einstein Condensate
Authors:
F. T. Arecchi,
J. Bragard,
L. M. Castellano
Abstract:
As an atomic Bose Einstein condensate (BEC) is coupled to a source of uncondensed atoms at the same temperature and to a sink (extraction towards an atom laser) the idealized description in terms of a Gross-Pitaevsky equation (GP) no longer holds. Under suitable physical assumptions we show that the dissipative BEC obeys a Complex Ginzburg Landau equation (CGL) and for some parameter range it un…
▽ More
As an atomic Bose Einstein condensate (BEC) is coupled to a source of uncondensed atoms at the same temperature and to a sink (extraction towards an atom laser) the idealized description in terms of a Gross-Pitaevsky equation (GP) no longer holds. Under suitable physical assumptions we show that the dissipative BEC obeys a Complex Ginzburg Landau equation (CGL) and for some parameter range it undergoes a space time patterning. As a consequence, the density of BEC atoms within the trap displays non trivial space time correlations, which can be detected by monitoring the density profile of the outgoing atom laser. The patterning condition requires a negative scattering length, as e.g. in $^7$Li. In such a case we expect a many domain collapsed regime, rather than a single one as reported for a closed BEC.
△ Less
Submitted 31 August, 1999;
originally announced August 1999.
