-
Thermally-induced microstructural evolution in nanoparticle-based CuO, WO$_3$ and CuO-WO$_3$ thin films for hydrogen gas sensing
Authors:
Kalyani Shaji,
Stanislav Haviar,
Petr Zeman,
Michal Procházka,
Radomír Čerstvý,
Nirmal Kumar,
Jiří Čapek
Abstract:
This study systematically investigates the microstructural evolution of nanoparticle-based CuO, WO$_3$, and composite 'CuO-WO$_3$' thin films induced by their post-deposition annealing. The films were reactively deposited using a magnetron-based gas aggregation technique, with the composite films consisting of alternating monolayers of CuO and WO$_3$ nanoparticles. After deposition, the films were…
▽ More
This study systematically investigates the microstructural evolution of nanoparticle-based CuO, WO$_3$, and composite 'CuO-WO$_3$' thin films induced by their post-deposition annealing. The films were reactively deposited using a magnetron-based gas aggregation technique, with the composite films consisting of alternating monolayers of CuO and WO$_3$ nanoparticles. After deposition, the films were annealed in synthetic air at temperatures ranging from 200 to 400$^\circ$C and characterized using scanning electron microscopy, X-ray diffraction, Raman spectroscopy, and X-ray photoelectron spectroscopy. Annealing of the CuO films led to the most pronounced changes associated with a gradual enhancement of crystallinity accompanied by significant particle growth with increasing annealing temperature, while the WO$_3$ and CuO-WO$_3$ films were more thermally stable to crystallization and particle growth. Notably, at 400$^\circ$C, the CuO--WO$_3$ films crystallized into a novel $γ$-CuWO$_4$ phase. The annealed films were further evaluated for their gas-sensing performance upon H$_2$ exposure and the obtained results were analyzed in relation to film properties and the microstructural evolution induced by annealing.
△ Less
Submitted 21 February, 2025;
originally announced February 2025.
-
New polymorph γ-CuWO4 inspired by γ-CuMoO4: experimental identification and theoretical verification
Authors:
Jiri Houska,
Stanislav Haviar,
Jiri Capek,
Radomir Cerstvy,
Kalyani Shaji,
Nirmal Kumar,
Petr Zeman
Abstract:
In the context of our efforts to develop hydrogen gas sensors, two samples of ternary CuWO4 with the same crystalline structure have been prepared by two different non-equilibrium techniques. We show that the materials' structure is significantly different from the known stable one, and we identify that it is very similar to that of previously reported γ-CuMoO4. We use ab initio calculations to co…
▽ More
In the context of our efforts to develop hydrogen gas sensors, two samples of ternary CuWO4 with the same crystalline structure have been prepared by two different non-equilibrium techniques. We show that the materials' structure is significantly different from the known stable one, and we identify that it is very similar to that of previously reported γ-CuMoO4. We use ab initio calculations to confirm that the newly identified phase, γ-CuWO4, represents a local energy minimum. We present very similar calculated and measured lattice constants and X-ray diffractograms. We make a case that the low-temperature formation of the metastable γ-CuWO4 phase is facilitated by easier kinetics and/or by Cu-rich composition of our samples, and we show that it converts to the stable phase after annealing to 600 °C.
△ Less
Submitted 6 January, 2025;
originally announced January 2025.
-
The influence of nitrogen ion implantation on the microstructure and chemical composition of a thin layer on the biodegradable Zn-0.8Mg-0.2Sr substrate
Authors:
Jan Pinc,
Petr Vlcak,
Miroslav Lebeda,
Vilem Bartunek,
Vojtech Smola,
Marek Vronka,
Jan Drahokoupil,
Zdenek Weiss,
Petr Svora,
Hana Lesakova,
Katerina Sindelarova,
Orsolya Molnarova,
Tomas Horazdovsky,
Tomas Studecky,
Pavel Salvetr,
Jiri Kubasek,
Jaroslav Capek,
Andrea Skolakova
Abstract:
In this research, the influence of the N+ ion implantation process on the microstructure of a biodegradable Zn-0.8Mg-0.2Sr alloy was investigated using various experimental techniques. Microscopic analysis revealed that a fluence of 17x10^17 ions/cm^2 resulted in the oversaturation of pure Zn and Mg2Zn11 surfaces, leading to the formation of nano/micro-porous layers up to 400 nm thick. The behavio…
▽ More
In this research, the influence of the N+ ion implantation process on the microstructure of a biodegradable Zn-0.8Mg-0.2Sr alloy was investigated using various experimental techniques. Microscopic analysis revealed that a fluence of 17x10^17 ions/cm^2 resulted in the oversaturation of pure Zn and Mg2Zn11 surfaces, leading to the formation of nano/micro-porous layers up to 400 nm thick. The behavior of the Zn-0.8Mg-0.2Sr alloy was observed to be similar to that of the individual pure phases, albeit without the creation of pore structures. A limited formation of MgO and Mg3N2 was observed on the alloy surface, although the overall presence of Mg significantly increased from 0.8 to 15 wt.%. This increase was caused by the decomposition of the Mg2Zn11 phase during the process and subsequent diffusion of Mg toward the surface. The absence of Zn3N2 within the samples could be explained by the thermodynamic instability and low Zn-N affinity. Despite the absence of zinc nitride, GD-OES confirmed 10 at. % of nitrogen in the pure zinc, suggesting a possible accommodation of N atoms in the interstitial positions. This study points out to the complex nature of the process and highlights other promising directions for future research.
△ Less
Submitted 9 July, 2024;
originally announced July 2024.
-
High Ductility and Transformation-Induced-Plasticity in Metastable Stainless Steel Processed by Selective Laser Melting with Low Power
Authors:
E. Polatidis,
J. Capek,
A. Arabi-Hashemi,
C. Leinenbach,
M. Strobl
Abstract:
A metastable austenitic Fe-Cr-Ni steel was processed by selective laser melting with low power, resulting in nearly random crystallographic texture. In-situ tensile loading and neutron diffraction experiments were undertaken and the results indicate high ductility, despite the presence of porosity, and pronounced strain-induced martensitic transformation. A secondary hardening is observed in the m…
▽ More
A metastable austenitic Fe-Cr-Ni steel was processed by selective laser melting with low power, resulting in nearly random crystallographic texture. In-situ tensile loading and neutron diffraction experiments were undertaken and the results indicate high ductility, despite the presence of porosity, and pronounced strain-induced martensitic transformation. A secondary hardening is observed in the mechanical data due to the martensite carrying significant load, upon its formation. The pronounced martensitic transformation is discussed with respect to the initial and the evolving deformation texture and its affinity for forming martensite under uniaxial tensile loading.
△ Less
Submitted 3 October, 2019; v1 submitted 2 October, 2019;
originally announced October 2019.
