-
Laser-Induced Gas-Phase Transfer and Direct Stamping of Nanomaterials: Comparison of Nanosecond and Femtosecond Pulses
Authors:
Nathan T. Goodfriend,
Inam Mirza,
Alexander V. Bulgakov,
Eleanor E. B. Campbell,
Nadezhda M. Bulgakova
Abstract:
The two-dimensional nanomaterial, hexagonal boron nitride (hBN) was cleanly transferred via a blister-based laser-induced forward-transfer method. The transfer was performed utilizing femtosecond and nanosecond laser pulses for separation distances of ~16 and ~200 micrometers between a titanium donor film deposited on a glass substrate and a silicon/silicon dioxide receiver. Transfer efficiency wa…
▽ More
The two-dimensional nanomaterial, hexagonal boron nitride (hBN) was cleanly transferred via a blister-based laser-induced forward-transfer method. The transfer was performed utilizing femtosecond and nanosecond laser pulses for separation distances of ~16 and ~200 micrometers between a titanium donor film deposited on a glass substrate and a silicon/silicon dioxide receiver. Transfer efficiency was examined for isolated laser pulses as well as for series of overlapping pulses and single layer transfer was confirmed. It was found that hBN is transferable for all tested combinations of pulse duration and transfer distances. The results indicate that transfer proceeds via direct stamping for short donor-to-receiver distances while, for the larger distance, the material is ejected from the donor and lands on the receiver. Furthermore, with overlapping pulses, nanosecond laser pulses enable a successful printing of hBN lines while, for fs laser pulses, the Ti film can be locally disrupted by multiple pulses and molten titanium may be transferred along with the hBN flakes. For reproducibility, and to avoid contamination with metal deposits, low laser fluence transfer with ns pulses and transfer distances smaller than the blister height provide the most favourable and reproducible condition.
△ Less
Submitted 26 December, 2024; v1 submitted 12 December, 2024;
originally announced December 2024.
-
Dynamic phase transition into a mixed-CDW state in 1$T$-TaS$_2$ via a thermal quench
Authors:
A. de la Torre,
Q. Wang,
Y. Masoumi,
B. Campbell,
J. V. Riffle,
D. Balasundaram,
P. M. Vora,
J. P. C. Ruff,
G. A. Fiete,
S. M. Hollen,
K. W. Plumb
Abstract:
Ultrafast light-matter interaction has emerged as a new mechanism to exert control over the macroscopic properties of quantum materials toward novel functionality. To date, technological applications of these non-thermal phases are limited by their ultrashort lifetimes and low-ordering temperatures. Among the most studied photoinduced metastable phases for their technological promise is the hidden…
▽ More
Ultrafast light-matter interaction has emerged as a new mechanism to exert control over the macroscopic properties of quantum materials toward novel functionality. To date, technological applications of these non-thermal phases are limited by their ultrashort lifetimes and low-ordering temperatures. Among the most studied photoinduced metastable phases for their technological promise is the hidden metallic charge density wave (H-CDW) in the model correlated CDW compound 1$T$-TaS$_2$. Despite active study and engineering, the nature of the photoinduced H-CDW remains the subject of debate and is only accessible at cryogenic temperatures. Here, we stabilize the H-CDW phase at thermal equilibrium up to near-room temperature by accessing an intermediate mixed CDW order regime via thermal quenching. Using x-ray high dynamic range reciprocal space mapping (HDRM) and scanning tunneling spectroscopy (STS), we reveal the coexistence of commensurate (C) CDW and H-CDW domains below 180 K during cooling and below 210 K during warming. Our findings show that each order parameter breaks basal plane mirror symmetry with different chiral orientations and induces out-of-plane unit cell tripling in the H-CDW phase. Despite metallic domain walls and a finite density of states at zero bias observed via STS, bulk resistance remains insulating due to CDW stacking disorder. This study establishes the H-CDW as a thermally stable phase and introduces a new mechanism for switchable metallic behavior in thin flakes of 1$T$-TaS$_2$ and similar materials with competing order phases.
△ Less
Submitted 8 January, 2025; v1 submitted 10 July, 2024;
originally announced July 2024.
-
Nanoscale electronic inhomogeneities in 1T-TaS$_2$
Authors:
B. Campbell,
J. V. Riffle,
A. de la Torre,
Q. Wang,
K. W. Plumb,
S. M. Hollen
Abstract:
We report a set of scanning tunneling microscopy (STM) and spectroscopy (STS) experiments studying native defects in CVT grown 1T-TaS$_2$. Six different sample surfaces from four bulk crystals were investigated. Wide area imaging reveals a prevalence of nanometer-scale electronic inhomogeneities due to native defects, with pristine regions interspersed. These inhomogeneities appear in typical as-g…
▽ More
We report a set of scanning tunneling microscopy (STM) and spectroscopy (STS) experiments studying native defects in CVT grown 1T-TaS$_2$. Six different sample surfaces from four bulk crystals were investigated. Wide area imaging reveals a prevalence of nanometer-scale electronic inhomogeneities due to native defects, with pristine regions interspersed. These inhomogeneities appear in typical as-grown crystals and coexist with a well-formed commensurate charge density wave of 1T-TaS$_2$ at low temperatures. Electronic inhomogeneities show up both as variations in the apparent height in STM and in the local density of states in STS; the bands can shift by 60 meV and the gap varies by more than 100 meV across inhomogeneities. These inhomogeneities are present in similar concentration across large-scale areas of all samples studied, but do not influence the charge density wave formation on local or global scales. The commensurate charge density wave exhibits long-range order and remains locally intact in the presence of these inhomogeneities.
△ Less
Submitted 30 October, 2023;
originally announced October 2023.
-
Giant spontaneous magnetostriction in MnTe driven by a novel magnetostructural coupling mechanism
Authors:
Raju Baral,
Milinda Abeykoon,
Branton J. Campbell,
Benjamin A. Frandsen
Abstract:
We present a comprehensive x-ray scattering study of spontaneous magnetostriction in hexagonal MnTe, an antiferromagnetic semiconductor with a Neel temperature of $T_{\mathrm{N}} = 307$ K. We observe the largest spontaneous magnetovolume effect known for an antiferromagnet, reaching a volume contraction of $|ΔV/V| > 7 \times 10^{-3}$. This can be justified semiquantitatively by considering bulk ma…
▽ More
We present a comprehensive x-ray scattering study of spontaneous magnetostriction in hexagonal MnTe, an antiferromagnetic semiconductor with a Neel temperature of $T_{\mathrm{N}} = 307$ K. We observe the largest spontaneous magnetovolume effect known for an antiferromagnet, reaching a volume contraction of $|ΔV/V| > 7 \times 10^{-3}$. This can be justified semiquantitatively by considering bulk material properties, the spatial dependence of the superexchange interaction, and the geometrical arrangement of magnetic moments in MnTe. The highly unusual linear scaling of the magnetovolume effect with the short-range magnetic correlations, beginning in the paramagnetic state well above $T_{\mathrm{N}}$, points to a novel physical mechanism, which we explain in terms of a trilinear coupling of the elastic strain with superposed distinct domains of the antiferromagnetic order parameter. This novel mechanism for coupling lattice strain to robust short-range magnetic order casts new light on magnetostrictive phenomena and also provides a template by which the exceptional magnetostrictive properties of MnTe might be realized in a wide range of other functional materials.
△ Less
Submitted 27 May, 2023;
originally announced May 2023.
-
Melting of gold by ultrashort laser pulses: Advanced two-temperature modeling and comparison with surface damage experiments
Authors:
Sergey A. Lizunov,
Alexander V. Bulgakov,
Eleanor E. B. Campbell,
Nadezhda M. Bulgakova
Abstract:
The ultrafast laser-induced solid-liquid phase transition in metals is still not clearly understood and its accurate quantitative description remains a challenge. Here we systematically investigated, both experimentally and theoretically, the melting of gold by single femto- and picosecond near-infrared laser pulses. Two laser systems with wavelengths of 800 and 1030 nm and pulse durations ranging…
▽ More
The ultrafast laser-induced solid-liquid phase transition in metals is still not clearly understood and its accurate quantitative description remains a challenge. Here we systematically investigated, both experimentally and theoretically, the melting of gold by single femto- and picosecond near-infrared laser pulses. Two laser systems with wavelengths of 800 and 1030 nm and pulse durations ranging from 124 fs to 7 ps were used and the damage and ablation thresholds were determined for each irradiation condition. The theoretical analysis was based on two-temperature modeling. Different expressions for the electron-lattice coupling rate and contribution of ballistic electrons were examined. In addition, the number of free electrons involved in the optical response is suggested to be dependent on the laser intensity and the influence of the fraction of involved electrons on the damage threshold was investigated. Only one combination of modelling parameters was able to describe consistently all the measured damage thresholds. Physical arguments are presented to explain the modeling results.
△ Less
Submitted 1 May, 2022;
originally announced May 2022.
-
Direct observation of enhanced electron-phonon coupling in copper nanoparticles in the warm-dense matter regime
Authors:
Quynh L. D. Nguyen,
Jacopo Simoni,
Kevin M. Dorney,
Xun Shi,
Jennifer L. Ellis,
Nathan J. Brooks,
Daniel D. Hickstein,
Amanda G. Grennell,
Sadegh Yazdi,
Eleanor E. B. Campbell,
Liang Z. Tan,
David Prendergast,
Jerome Daligault,
Henry C. Kapteyn,
Margaret M. Murnane
Abstract:
Warm-dense matter (WDM) is a highly-excited state that lies at the confluence of solids, plasmas, and liquids and that cannot be described by equilibrium theories. The transient nature of this state when created in a laboratory, as well as the difficulties in probing the strongly-coupled interactions between the electrons and the ions, make it challenging to develop a complete understanding of mat…
▽ More
Warm-dense matter (WDM) is a highly-excited state that lies at the confluence of solids, plasmas, and liquids and that cannot be described by equilibrium theories. The transient nature of this state when created in a laboratory, as well as the difficulties in probing the strongly-coupled interactions between the electrons and the ions, make it challenging to develop a complete understanding of matter in this regime. In this work, by exciting isolated ~8 nm nanoparticles with a femtosecond laser below the ablation threshold, we create uniformly-excited WDM. We then use photoelectron spectroscopy to track the instantaneous electron temperature and directly extract the strongest electron-ion coupling observed experimentally to date. By directly comparing with state-of-the-art theories, we confirm that the superheated nanoparticles lie at the boundary between hot solids and plasmas, with associated strong electron-ion coupling. This is evidenced both by the fast energy loss of electrons to ions, as well as a strong modulation of the electron temperature by acoustic oscillations in the nanoparticle. This work demonstrates a new route for experimental exploration and theoretical validation of the exotic properties of WDM.
△ Less
Submitted 28 June, 2022; v1 submitted 27 October, 2021;
originally announced October 2021.
-
Switchable Rashba Anisotropy in Two-dimensional Hybrid Organic-Inorganic Perovskite by Hybrid Improper Ferroelectricity
Authors:
Fei Wang,
Heng Gao,
Coen de Graaf,
Josep M. Poblet,
Branton J. Campbell,
Alessandro Stroppa
Abstract:
Two-dimensional (2D) hybrid organic-inorganic perovskites (HOIPs) are introducing new directions in the 2D materials landscape. The coexistence of ferroelectricity and spin-orbit interactions play a key role in their optoelectronic properties. We perform a detailed study on a recently synthesized ferroelectric 2D-HOIP, (AMP)PbI$_4$ (AMP = 4-aminomethyl-piperidinium). The calculated polarization an…
▽ More
Two-dimensional (2D) hybrid organic-inorganic perovskites (HOIPs) are introducing new directions in the 2D materials landscape. The coexistence of ferroelectricity and spin-orbit interactions play a key role in their optoelectronic properties. We perform a detailed study on a recently synthesized ferroelectric 2D-HOIP, (AMP)PbI$_4$ (AMP = 4-aminomethyl-piperidinium). The calculated polarization and Rashba parameter are in excellent agreement with experimental values. We report a striking new effect, i.e., an extraordinarily large Rashba anisotropy that is tunable by ferroelectric polarization: as polarization is reversed, not only the spin texture chirality is inverted, but also the major and minor axes of the Rashba anisotropy ellipse in k-space are interchanged - a pseudo rotation. A $k \cdot p$ model Hamiltonian and symmetry-mode analysis reveal a quadrilinear coupling between the cation-rotation modes responsible for the Rashba ellipse pseudo-rotation, the framework rotation, and the polarization. These findings may provide new avenues for spin-optoelectronic devices such as spin valves or spin FETs.
△ Less
Submitted 7 April, 2021;
originally announced April 2021.
-
Role of remote interfacial phonons in the resistivity of graphene
Authors:
Y. G. You,
J. H. Ahn,
B. H. Park,
Y. Kwon,
E. E. B. Campbell,
S. H. Jhang
Abstract:
The temperature ($\it T$) dependence of electrical resistivity in graphene has been experimentally investigated between 10 and 400 K for samples prepared on various substrates; HfO$_2$, SiO$_2$ and h-BN. The resistivity of graphene shows a linear $\it T$-dependence at low $\it T$ and becomes superlinear above a substrate-dependent transition temperature. The results are explained by remote interfa…
▽ More
The temperature ($\it T$) dependence of electrical resistivity in graphene has been experimentally investigated between 10 and 400 K for samples prepared on various substrates; HfO$_2$, SiO$_2$ and h-BN. The resistivity of graphene shows a linear $\it T$-dependence at low $\it T$ and becomes superlinear above a substrate-dependent transition temperature. The results are explained by remote interfacial phonon scattering by surface optical phonons at the substrates. The use of an appropriate substrate can lead to a significant improvement in the charge transport of graphene.
△ Less
Submitted 22 March, 2019;
originally announced March 2019.
-
Generalized Regular k-point Grid Generation On The Fly
Authors:
Wiley S. Morgan,
John E. Christensen,
Parker K. Hamilton,
Jeremy J. Jorgensen,
Branton J. Campbell,
Gus L. W. Hart,
Rodney W. Forcade
Abstract:
In the DFT community, it is common practice to use regular k-point grids (Monkhorst-Pack, MP) for Brillioun zone integration. Recently Wisesa et. al.\cite{wisesa2016efficient} and Morgan et. al.\cite{MORGAN2018424} demonstrated that generalized regular (GR) grids offer advantages over traditional MP grids. GR grids have not been widely adopted because one must search through a large number of cand…
▽ More
In the DFT community, it is common practice to use regular k-point grids (Monkhorst-Pack, MP) for Brillioun zone integration. Recently Wisesa et. al.\cite{wisesa2016efficient} and Morgan et. al.\cite{MORGAN2018424} demonstrated that generalized regular (GR) grids offer advantages over traditional MP grids. GR grids have not been widely adopted because one must search through a large number of candidate grids. This work describes an algorithm that can quickly search over GR grids for those that have the most uniform distribution of points and the best symmetry reduction. The grids are ~60% more efficient, on average, than MP grids and can now be generated on the fly in seconds.
△ Less
Submitted 8 February, 2019;
originally announced February 2019.
-
Observation of classical-quantum crossover of 1/f flux noise and its paramagnetic temperature dependence
Authors:
C. M. Quintana,
Yu Chen,
D. Sank,
A. G. Petukhov,
T. C. White,
Dvir Kafri,
B. Chiaro,
A. Megrant,
R. Barends,
B. Campbell,
Z. Chen,
A. Dunsworth,
A. G. Fowler,
R. Graff,
E. Jeffrey,
J. Kelly,
E. Lucero,
J. Y. Mutus,
M. Neeley,
C. Neill,
P. J. J. O'Malley,
P. Roushan,
A. Shabani,
V. N. Smelyanskiy,
A. Vainsencher
, et al. (3 additional authors not shown)
Abstract:
By analyzing the dissipative dynamics of a tunable gap flux qubit, we extract both sides of its two-sided environmental flux noise spectral density over a range of frequencies around $2k_BT/h \approx 1\,\rm{GHz}$, allowing for the observation of a classical-quantum crossover. Below the crossover point, the symmetric noise component follows a $1/f$ power law that matches the magnitude of the $1/f$…
▽ More
By analyzing the dissipative dynamics of a tunable gap flux qubit, we extract both sides of its two-sided environmental flux noise spectral density over a range of frequencies around $2k_BT/h \approx 1\,\rm{GHz}$, allowing for the observation of a classical-quantum crossover. Below the crossover point, the symmetric noise component follows a $1/f$ power law that matches the magnitude of the $1/f$ noise near $1\,{\rm{Hz}}$. The antisymmetric component displays a 1/T dependence below $100\,\rm{mK}$, providing dynamical evidence for a paramagnetic environment. Extrapolating the two-sided spectrum predicts the linewidth and reorganization energy of incoherent resonant tunneling between flux qubit wells.
△ Less
Submitted 5 September, 2016; v1 submitted 31 August, 2016;
originally announced August 2016.
-
Dielectric surface loss in superconducting resonators with flux-trapping holes
Authors:
B. Chiaro,
A. Megrant,
A. Dunsworth,
Z. Chen,
R. Barends,
B. Campbell,
Y. Chen,
A. Fowler,
I. C. Hoi,
E. Jeffrey,
J. Kelly,
J. Mutus,
C. Neill,
P. J. J. O'Malley,
C. Quintana,
P. Roushan,
D. Sank,
A. Vainsencher,
J. Wenner,
T. C. White,
John M. Martinis
Abstract:
Surface distributions of two level system (TLS) defects and magnetic vortices are limiting dissipation sources in superconducting quantum circuits. Arrays of flux-trapping holes are commonly used to eliminate loss due to magnetic vortices, but may increase dielectric TLS loss. We find that dielectric TLS loss increases by approximately 25% for resonators with a hole array beginning 2 $μ\text{m}$ f…
▽ More
Surface distributions of two level system (TLS) defects and magnetic vortices are limiting dissipation sources in superconducting quantum circuits. Arrays of flux-trapping holes are commonly used to eliminate loss due to magnetic vortices, but may increase dielectric TLS loss. We find that dielectric TLS loss increases by approximately 25% for resonators with a hole array beginning 2 $μ\text{m}$ from the resonator edge, while the dielectric loss added by holes further away was below measurement sensitivity. Other forms of loss were not affected by the holes. Additionally, we estimate the loss due to residual magnetic effects to be $9\times 10^{-10} /μ\text{T} $ for resonators patterned with flux-traps and operated in magnetic fields up to $5$ $μ\text{T}$. This is orders of magnitude below the total loss of the best superconducting coplanar waveguide resonators.
△ Less
Submitted 29 December, 2016; v1 submitted 20 July, 2016;
originally announced July 2016.
-
Digitized adiabatic quantum computing with a superconducting circuit
Authors:
R. Barends,
A. Shabani,
L. Lamata,
J. Kelly,
A. Mezzacapo,
U. Las Heras,
R. Babbush,
A. G. Fowler,
B. Campbell,
Yu Chen,
Z. Chen,
B. Chiaro,
A. Dunsworth,
E. Jeffrey,
E. Lucero,
A. Megrant,
J. Y. Mutus,
M. Neeley,
C. Neill,
P. J. J. O'Malley,
C. Quintana,
P. Roushan,
D. Sank,
A. Vainsencher,
J. Wenner
, et al. (4 additional authors not shown)
Abstract:
A major challenge in quantum computing is to solve general problems with limited physical hardware. Here, we implement digitized adiabatic quantum computing, combining the generality of the adiabatic algorithm with the universality of the digital approach, using a superconducting circuit with nine qubits. We probe the adiabatic evolutions, and quantify the success of the algorithm for random spin…
▽ More
A major challenge in quantum computing is to solve general problems with limited physical hardware. Here, we implement digitized adiabatic quantum computing, combining the generality of the adiabatic algorithm with the universality of the digital approach, using a superconducting circuit with nine qubits. We probe the adiabatic evolutions, and quantify the success of the algorithm for random spin problems. We find that the system can approximate the solutions to both frustrated Ising problems and problems with more complex interactions, with a performance that is comparable. The presented approach is compatible with small-scale systems as well as future error-corrected quantum computers.
△ Less
Submitted 10 November, 2015;
originally announced November 2015.
-
Measuring and Suppressing Quantum State Leakage in a Superconducting Qubit
Authors:
Zijun Chen,
Julian Kelly,
Chris Quintana,
R. Barends,
B. Campbell,
Yu Chen,
B. Chiaro,
A. Dunsworth,
A. Fowler,
E. Lucero,
E. Jeffrey,
A. Megrant,
J. Mutus,
M. Neeley,
C. Neill,
P. J. J. O'Malley,
P. Roushan,
D. Sank,
A. Vainsencher,
J. Wenner,
T. C. White,
A. N. Korotkov,
John M. Martinis
Abstract:
Leakage errors occur when a quantum system leaves the two-level qubit subspace. Reducing these errors is critically important for quantum error correction to be viable. To quantify leakage errors, we use randomized benchmarking in conjunction with measurement of the leakage population. We characterize single qubit gates in a superconducting qubit, and by refining our use of Derivative Reduction by…
▽ More
Leakage errors occur when a quantum system leaves the two-level qubit subspace. Reducing these errors is critically important for quantum error correction to be viable. To quantify leakage errors, we use randomized benchmarking in conjunction with measurement of the leakage population. We characterize single qubit gates in a superconducting qubit, and by refining our use of Derivative Reduction by Adiabatic Gate (DRAG) pulse shaping along with detuning of the pulses, we obtain gate errors consistently below $10^{-3}$ and leakage rates at the $10^{-5}$ level. With the control optimized, we find that a significant portion of the remaining leakage is due to incoherent heating of the qubit.
△ Less
Submitted 20 September, 2015; v1 submitted 17 September, 2015;
originally announced September 2015.
-
Preserving entanglement during weak measurement demonstrated with a violation of the Bell-Leggett-Garg inequality
Authors:
T. C. White,
J. Y. Mutus,
J. Dressel,
J. Kelly,
R. Barends,
E. Jeffrey,
D. Sank,
A. Megrant,
B. Campbell,
Yu Chen,
Z. Chen,
B. Chiaro,
A. Dunsworth,
I. -C. Hoi,
C. Neill,
P. J. J. O'Malley,
P. Roushan,
A. Vainsencher,
J. Wenner,
A. N. Korotkov,
John M. Martinis
Abstract:
Weak measurement has provided new insight into the nature of quantum measurement, by demonstrating the ability to extract average state information without fully projecting the system. For single qubit measurements, this partial projection has been demonstrated with violations of the Leggett-Garg inequality. Here we investigate the effects of weak measurement on a maximally entangled Bell state th…
▽ More
Weak measurement has provided new insight into the nature of quantum measurement, by demonstrating the ability to extract average state information without fully projecting the system. For single qubit measurements, this partial projection has been demonstrated with violations of the Leggett-Garg inequality. Here we investigate the effects of weak measurement on a maximally entangled Bell state through application of the Hybrid Bell-Leggett-Garg inequality (BLGI) on a linear chain of four transmon qubits. By correlating the results of weak ancilla measurements with subsequent projective readout, we achieve a violation of the BLGI with 27 standard deviations of certainty.
△ Less
Submitted 2 December, 2015; v1 submitted 7 April, 2015;
originally announced April 2015.
-
Traveling wave parametric amplifier with Josephson junctions using minimal resonator phase matching
Authors:
T. C. White,
J. Y. Mutus,
I. -C. Hoi,
R. Barends,
B. Campbell,
Yu Chen,
Z. Chen,
B. Chiaro,
A. Dunsworth,
E. Jeffrey,
J. Kelly,
A. Megrant,
C. Neill,
P. J. J. O'Malley,
P. Roushan,
D. Sank,
A. Vainsencher,
J. Wenner,
S. Chaudhuri,
J. Gao,
John M. Martinis
Abstract:
Josephson parametric amplifiers have become a critical tool in superconducting device physics due to their high gain and quantum-limited noise. Traveling wave parametric amplifiers (TWPAs) promise similar noise performance while allowing for significant increases in both bandwidth and dynamic range. We present a TWPA device based on an LC-ladder transmission line of Josephson junctions and paralle…
▽ More
Josephson parametric amplifiers have become a critical tool in superconducting device physics due to their high gain and quantum-limited noise. Traveling wave parametric amplifiers (TWPAs) promise similar noise performance while allowing for significant increases in both bandwidth and dynamic range. We present a TWPA device based on an LC-ladder transmission line of Josephson junctions and parallel plate capacitors using low-loss amorphous silicon dielectric. Crucially, we have inserted $λ/4$ resonators at regular intervals along the transmission line in order to maintain the phase matching condition between pump, signal, and idler and increase gain. We achieve an average gain of 12\,dB across a 4\,GHz span, along with an average saturation power of -92\,dBm with noise approaching the quantum limit.
△ Less
Submitted 14 March, 2015;
originally announced March 2015.
-
Digital quantum simulation of fermionic models with a superconducting circuit
Authors:
R. Barends,
L. Lamata,
J. Kelly,
L. García-Álvarez,
A. G. Fowler,
A. Megrant,
E. Jeffrey,
T. C. White,
D. Sank,
J. Y. Mutus,
B. Campbell,
Yu Chen,
Z. Chen,
B. Chiaro,
A. Dunsworth,
I. -C. Hoi,
C. Neill,
P. J. J. O'Malley,
C. Quintana,
P. Roushan,
A. Vainsencher,
J. Wenner,
E. Solano,
John M. Martinis
Abstract:
Simulating quantum physics with a device which itself is quantum mechanical, a notion Richard Feynman originated, would be an unparallelled computational resource. However, the universal quantum simulation of fermionic systems is daunting due to their particle statistics, and Feynman left as an open question whether it could be done, because of the need for non-local control. Here, we implement fe…
▽ More
Simulating quantum physics with a device which itself is quantum mechanical, a notion Richard Feynman originated, would be an unparallelled computational resource. However, the universal quantum simulation of fermionic systems is daunting due to their particle statistics, and Feynman left as an open question whether it could be done, because of the need for non-local control. Here, we implement fermionic interactions with digital techniques in a superconducting circuit. Focusing on the Hubbard model, we perform time evolution with constant interactions as well as a dynamic phase transition with up to four fermionic modes encoded in four qubits. The implemented digital approach is universal and allows for the efficient simulation of fermions in arbitrary spatial dimensions. We use in excess of 300 single-qubit and two-qubit gates, and reach global fidelities which are limited by gate errors. This demonstration highlights the feasibility of the digital approach and opens a viable route towards analog-digital quantum simulation of interacting fermions and bosons in large-scale solid state systems.
△ Less
Submitted 30 January, 2015;
originally announced January 2015.
-
State preservation by repetitive error detection in a superconducting quantum circuit
Authors:
J. Kelly,
R. Barends,
A. G. Fowler,
A. Megrant,
E. Jeffrey,
T. C. White,
D. Sank,
J. Y. Mutus,
B. Campbell,
Yu Chen,
Z. Chen,
B. Chiaro,
A. Dunsworth,
I. -C. Hoi,
C. Neill,
P. J. J. O'Malley,
C. Quintana,
P. Roushan,
A. Vainsencher,
J. Wenner,
A. N. Cleland,
John M. Martinis
Abstract:
Quantum computing becomes viable when a quantum state can be preserved from environmentally-induced error. If quantum bits (qubits) are sufficiently reliable, errors are sparse and quantum error correction (QEC) is capable of identifying and correcting them. Adding more qubits improves the preservation by guaranteeing increasingly larger clusters of errors will not cause logical failure - a key re…
▽ More
Quantum computing becomes viable when a quantum state can be preserved from environmentally-induced error. If quantum bits (qubits) are sufficiently reliable, errors are sparse and quantum error correction (QEC) is capable of identifying and correcting them. Adding more qubits improves the preservation by guaranteeing increasingly larger clusters of errors will not cause logical failure - a key requirement for large-scale systems. Using QEC to extend the qubit lifetime remains one of the outstanding experimental challenges in quantum computing. Here, we report the protection of classical states from environmental bit-flip errors and demonstrate the suppression of these errors with increasing system size. We use a linear array of nine qubits, which is a natural precursor of the two-dimensional surface code QEC scheme, and track errors as they occur by repeatedly performing projective quantum non-demolition (QND) parity measurements. Relative to a single physical qubit, we reduce the failure rate in retrieving an input state by a factor of 2.7 for five qubits and a factor of 8.5 for nine qubits after eight cycles. Additionally, we tomographically verify preservation of the non-classical Greenberger-Horne-Zeilinger (GHZ) state. The successful suppression of environmentally-induced errors strongly motivates further research into the many exciting challenges associated with building a large-scale superconducting quantum computer.
△ Less
Submitted 26 November, 2014;
originally announced November 2014.
-
Qubit metrology of ultralow phase noise using randomized benchmarking
Authors:
P. J. J. O'Malley,
J. Kelly,
R. Barends,
B. Campbell,
Y. Chen,
Z. Chen,
B. Chiaro,
A. Dunsworth,
A. G. Fowler,
I. -C. Hoi,
E. Jeffrey,
A. Megrant,
J. Mutus,
C. Neill,
C. Quintana,
P. Roushan,
D. Sank,
A. Vainsencher,
J. Wenner,
T. C. White,
A. N. Korotkov,
A. N. Cleland,
John M. Martinis
Abstract:
A precise measurement of dephasing over a range of timescales is critical for improving quantum gates beyond the error correction threshold. We present a metrological tool, based on randomized benchmarking, capable of greatly increasing the precision of Ramsey and spin echo sequences by the repeated but incoherent addition of phase noise. We find our SQUID-based qubit is not limited by $1/f$ flux…
▽ More
A precise measurement of dephasing over a range of timescales is critical for improving quantum gates beyond the error correction threshold. We present a metrological tool, based on randomized benchmarking, capable of greatly increasing the precision of Ramsey and spin echo sequences by the repeated but incoherent addition of phase noise. We find our SQUID-based qubit is not limited by $1/f$ flux noise at short timescales, but instead observe a telegraph noise mechanism that is not amenable to study with standard measurement techniques.
△ Less
Submitted 16 April, 2015; v1 submitted 10 November, 2014;
originally announced November 2014.
-
Characterization and reduction of microfabrication-induced decoherence in superconducting quantum circuits
Authors:
C. M. Quintana,
A. Megrant,
Z. Chen,
A. Dunsworth,
B. Chiaro,
R. Barends,
B. Campbell,
Yu Chen,
I. -C. Hoi,
E. Jeffrey,
J. Kelly,
J. Y. Mutus,
P. J. J. O'Malley,
C. Neill,
P. Roushan,
D. Sank,
A. Vainsencher,
J. Wenner,
T. C. White,
A. N. Cleland,
John M. Martinis
Abstract:
Many superconducting qubits are highly sensitive to dielectric loss, making the fabrication of coherent quantum circuits challenging. To elucidate this issue, we characterize the interfaces and surfaces of superconducting coplanar waveguide resonators and study the associated microwave loss. We show that contamination induced by traditional qubit lift-off processing is particularly detrimental to…
▽ More
Many superconducting qubits are highly sensitive to dielectric loss, making the fabrication of coherent quantum circuits challenging. To elucidate this issue, we characterize the interfaces and surfaces of superconducting coplanar waveguide resonators and study the associated microwave loss. We show that contamination induced by traditional qubit lift-off processing is particularly detrimental to quality factors without proper substrate cleaning, while roughness plays at most a small role. Aggressive surface treatment is shown to damage the crystalline substrate and degrade resonator quality. We also introduce methods to characterize and remove ultra-thin resist residue, providing a way to quantify and minimize remnant sources of loss on device surfaces.
△ Less
Submitted 17 July, 2014;
originally announced July 2014.
-
Rolling quantum dice with a superconducting qubit
Authors:
R. Barends,
J. Kelly,
A. Veitia,
A. Megrant,
A. G. Fowler,
B. Campbell,
Y. Chen,
Z. Chen,
B. Chiaro,
A. Dunsworth,
I. -C. Hoi,
E. Jeffrey,
C. Neill,
P. J. J. O'Malley,
J. Mutus,
C. Quintana,
P. Roushan,
D. Sank,
J. Wenner,
T. C. White,
A. N. Korotkov,
A. N. Cleland,
John M. Martinis
Abstract:
One of the key challenges in quantum information is coherently manipulating the quantum state. However, it is an outstanding question whether control can be realized with low error. Only gates from the Clifford group -- containing $π$, $π/2$, and Hadamard gates -- have been characterized with high accuracy. Here, we show how the Platonic solids enable implementing and characterizing larger gate se…
▽ More
One of the key challenges in quantum information is coherently manipulating the quantum state. However, it is an outstanding question whether control can be realized with low error. Only gates from the Clifford group -- containing $π$, $π/2$, and Hadamard gates -- have been characterized with high accuracy. Here, we show how the Platonic solids enable implementing and characterizing larger gate sets. We find that all gates can be implemented with low error. The results fundamentally imply arbitrary manipulation of the quantum state can be realized with high precision, providing new practical possibilities for designing efficient quantum algorithms.
△ Less
Submitted 12 June, 2014;
originally announced June 2014.
-
Random telegraph noise in metallic single-walled carbon nanotubes
Authors:
Hyun-Jong Chung,
Tae Woo Uhm,
Sung Won Kim,
Young Gyu You,
Sang Wook Lee,
Sung Ho Jhang,
Eleanor E. B. Campbell,
Yung Woo Park
Abstract:
We have investigated random telegraph noise (RTN) observed in individual metallic carbon nanotubes (CNTs). Mean lifetimes in high- and low-current states, shigh and slow, have been studied as a function of bias-voltage and gate-voltage as well as temperature. By analyzing the statistics and features of the RTN, we suggest that this noise is due to the random transition of defects between two metas…
▽ More
We have investigated random telegraph noise (RTN) observed in individual metallic carbon nanotubes (CNTs). Mean lifetimes in high- and low-current states, shigh and slow, have been studied as a function of bias-voltage and gate-voltage as well as temperature. By analyzing the statistics and features of the RTN, we suggest that this noise is due to the random transition of defects between two metastable states, activated by inelastic scattering with conduction electrons. Our results indicate an important role of defect motions in the 1=f noise in CNTs.
△ Less
Submitted 14 May, 2014;
originally announced May 2014.
-
Optimal quantum control using randomized benchmarking
Authors:
J. Kelly,
R. Barends,
B. Campbell,
Y. Chen,
Z. Chen,
B. Chiaro,
A. Dunsworth,
A. G. Fowler,
I. -C. Hoi,
E. Jeffrey,
A. Megrant,
J. Mutus,
C. Neill,
P. J. J. O`Malley,
C. Quintana,
P. Roushan,
D. Sank,
A. Vainsencher,
J. Wenner,
T. C. White,
A. N. Cleland,
John M. Martinis
Abstract:
We present a method for optimizing quantum control in experimental systems, using a subset of randomized benchmarking measurements to rapidly infer error. This is demonstrated to improve single- and two-qubit gates, minimize gate bleedthrough, where a gate mechanism can cause errors on subsequent gates, and identify control crosstalk in superconducting qubits. This method is able to correct parame…
▽ More
We present a method for optimizing quantum control in experimental systems, using a subset of randomized benchmarking measurements to rapidly infer error. This is demonstrated to improve single- and two-qubit gates, minimize gate bleedthrough, where a gate mechanism can cause errors on subsequent gates, and identify control crosstalk in superconducting qubits. This method is able to correct parameters to where control errors no longer dominate, and is suitable for automated and closed-loop optimization of experimental systems.
△ Less
Submitted 28 February, 2014;
originally announced March 2014.
-
Qubit architecture with high coherence and fast tunable coupling
Authors:
Yu Chen,
C. Neill,
P. Roushan,
N. Leung,
M. Fang,
R. Barends,
J. Kelly,
B. Campbell,
Z. Chen,
B. Chiaro,
A. Dunsworth,
E. Jeffrey,
A. Megrant,
J. Y. Mutus,
P. J. J. O'Malley,
C. M. Quintana,
D. Sank,
A. Vainsencher,
J. Wenner,
T. C. White,
Michael R. Geller,
A. N. Cleland,
John M. Martinis
Abstract:
We introduce a superconducting qubit architecture that combines high-coherence qubits and tunable qubit-qubit coupling. With the ability to set the coupling to zero, we demonstrate that this architecture is protected from the frequency crowding problems that arise from fixed coupling. More importantly, the coupling can be tuned dynamically with nanosecond resolution, making this architecture a ver…
▽ More
We introduce a superconducting qubit architecture that combines high-coherence qubits and tunable qubit-qubit coupling. With the ability to set the coupling to zero, we demonstrate that this architecture is protected from the frequency crowding problems that arise from fixed coupling. More importantly, the coupling can be tuned dynamically with nanosecond resolution, making this architecture a versatile platform with applications ranging from quantum logic gates to quantum simulation. We illustrate the advantages of dynamic coupling by implementing a novel adiabatic controlled-Z gate, at a speed approaching that of single-qubit gates. Integrating coherence and scalable control, our "gmon" architecture is a promising path towards large-scale quantum computation and simulation.
△ Less
Submitted 28 February, 2014;
originally announced February 2014.
-
Logic gates at the surface code threshold: Superconducting qubits poised for fault-tolerant quantum computing
Authors:
R. Barends,
J. Kelly,
A. Megrant,
A. Veitia,
D. Sank,
E. Jeffrey,
T. C. White,
J. Mutus,
A. G. Fowler,
B. Campbell,
Y. Chen,
Z. Chen,
B. Chiaro,
A. Dunsworth,
C. Neill,
P. O`Malley,
P. Roushan,
A. Vainsencher,
J. Wenner,
A. N. Korotkov,
A. N. Cleland,
John M. Martinis
Abstract:
A quantum computer can solve hard problems - such as prime factoring, database searching, and quantum simulation - at the cost of needing to protect fragile quantum states from error. Quantum error correction provides this protection, by distributing a logical state among many physical qubits via quantum entanglement. Superconductivity is an appealing platform, as it allows for constructing large…
▽ More
A quantum computer can solve hard problems - such as prime factoring, database searching, and quantum simulation - at the cost of needing to protect fragile quantum states from error. Quantum error correction provides this protection, by distributing a logical state among many physical qubits via quantum entanglement. Superconductivity is an appealing platform, as it allows for constructing large quantum circuits, and is compatible with microfabrication. For superconducting qubits the surface code is a natural choice for error correction, as it uses only nearest-neighbour coupling and rapidly-cycled entangling gates. The gate fidelity requirements are modest: The per-step fidelity threshold is only about 99%. Here, we demonstrate a universal set of logic gates in a superconducting multi-qubit processor, achieving an average single-qubit gate fidelity of 99.92% and a two-qubit gate fidelity up to 99.4%. This places Josephson quantum computing at the fault-tolerant threshold for surface code error correction. Our quantum processor is a first step towards the surface code, using five qubits arranged in a linear array with nearest-neighbour coupling. As a further demonstration, we construct a five-qubit Greenberger-Horne-Zeilinger (GHZ) state using the complete circuit and full set of gates. The results demonstrate that Josephson quantum computing is a high-fidelity technology, with a clear path to scaling up to large-scale, fault-tolerant quantum circuits.
△ Less
Submitted 19 February, 2014;
originally announced February 2014.
-
Determination of the Bending Rigidity of Graphene via Electrostatic Actuation of Buckled Membranes
Authors:
Niklas Lindahl,
Daniel Midtvedt,
Johannes Svensson,
Oleg A. Nerushev,
Niclas Lindvall,
Andreas Isacsson,
Eleanor E. B. Campbell
Abstract:
The small mass and atomic-scale thickness of graphene membranes make them highly suitable for nanoelectromechanical devices such as e.g. mass sensors, high frequency resonators or memory elements. Although only atomically thick, many of the mechanical properties of graphene membranes can be described by classical continuum mechanics. An important parameter for predicting the performance and linear…
▽ More
The small mass and atomic-scale thickness of graphene membranes make them highly suitable for nanoelectromechanical devices such as e.g. mass sensors, high frequency resonators or memory elements. Although only atomically thick, many of the mechanical properties of graphene membranes can be described by classical continuum mechanics. An important parameter for predicting the performance and linearity of graphene nanoelectromechanical devices as well as for describing ripple formation and other properties such as electron scattering mechanisms, is the bending rigidity, κ. In spite of the importance of this parameter it has so far only been estimated indirectly for monolayer graphene from the phonon spectrum of graphite, estimated from AFM measurements or predicted from ab initio calculations or bond-order potential models. Here, we employ a new approach to the experimental determination of κ by exploiting the snap-through instability in pre-buckled graphene membranes. We demonstrate the reproducible fabrication of convex buckled graphene membranes by controlling the thermal stress during the fabrication procedure and show the abrupt switching from convex to concave geometry that occurs when electrostatic pressure is applied via an underlying gate electrode. The bending rigidity of bilayer graphene membranes under ambient conditions was determined to be $35.5^{+20}_{-15}$ eV. Monolayers have significantly lower κ than bilayers.
△ Less
Submitted 20 March, 2012;
originally announced March 2012.
-
Microscopic annealing process and its impact on superconductivity in T'-structure electron-doped copper oxides
Authors:
Hye Jung Kang,
Pengcheng Dai,
Branton J. Campbell,
Peter J. Chupas,
Stephan Rosenkranz,
Peter L. Lee,
Qingzhen Huang,
Shiliang Li,
Seiki Komiya,
Yoichi Ando
Abstract:
High-transition-temperature superconductivity arises in copper oxides when holes or electrons are doped into the CuO2 planes of their insulating parent compounds. While hole-doping quickly induces metallic behavior and superconductivity in many cuprates, electron-doping alone is insufficient in materials such as R2CuO4 (R is Nd, Pr, La, Ce, etc.), where it is necessary to anneal an as-grown samp…
▽ More
High-transition-temperature superconductivity arises in copper oxides when holes or electrons are doped into the CuO2 planes of their insulating parent compounds. While hole-doping quickly induces metallic behavior and superconductivity in many cuprates, electron-doping alone is insufficient in materials such as R2CuO4 (R is Nd, Pr, La, Ce, etc.), where it is necessary to anneal an as-grown sample in a low-oxygen environment to remove a tiny amount of oxygen in order to induce superconductivity. Here we show that the microscopic process of oxygen reduction repairs Cu deficiencies in the as-grown materials and creates oxygen vacancies in the stoichiometric CuO2 planes, effectively reducing disorder and providing itinerant carriers for superconductivity. The resolution of this long-standing materials issue suggests that the fundamental mechanism for superconductivity is the same for electron- and hole-doped copper oxides.
△ Less
Submitted 15 January, 2007;
originally announced January 2007.
-
Phosphorus cluster production by laser ablation
Authors:
A. V. Bulgakov,
O. F. Bobrenok,
Igor Ozerov,
W. Marine,
S. Giorgio,
A. Lassesson,
E. E. B. Campbell
Abstract:
Neutral and charged phosphorus clusters of a wide size range have been produced by pulsed laser ablation (PLA) in vacuum at 532, 337, and 193 nm ablating wavelengths and investigated by time-of-flight mass spectrometry. The neutral P_n clusters are even-numbered with local abundance maxima at n = 10 and 14, while the cationic and anionic clusters are preferentially odd-numbered with (P_7)+, (P_2…
▽ More
Neutral and charged phosphorus clusters of a wide size range have been produced by pulsed laser ablation (PLA) in vacuum at 532, 337, and 193 nm ablating wavelengths and investigated by time-of-flight mass spectrometry. The neutral P_n clusters are even-numbered with local abundance maxima at n = 10 and 14, while the cationic and anionic clusters are preferentially odd-numbered with (P_7)+, (P_21)+, and (P_17)- being the most abundant ions. The dominance of the magic clusters is more pronounced at 337-nm ablation that is explained by efficient direct ejection of their building blocks under these conditions. Nanocrystalline phosphorus films have been produced by PLA in ambient helium gas.
△ Less
Submitted 5 April, 2004;
originally announced April 2004.
-
Glass Transition in the Polaron Dynamics of CMR Manganites
Authors:
D. N. Argyriou,
J. W. Lynn,
R. Osborn,
B. Campbell,
J. F. Mitchell,
U. Ruett,
H. N. Bordallo,
A. Wildes,
C. D. Ling
Abstract:
Neutron scattering measurements on a bilayer manganite near optimal doping show that the short-range polarons correlations are completely dynamic at high T, but then freeze upon cooling to a temperature T* 310 K. This glass transition suggests that the paramagnetic/insulating state arises from an inherent orbital frustration that inhibits the formation of a long range orbital- and charge-ordered…
▽ More
Neutron scattering measurements on a bilayer manganite near optimal doping show that the short-range polarons correlations are completely dynamic at high T, but then freeze upon cooling to a temperature T* 310 K. This glass transition suggests that the paramagnetic/insulating state arises from an inherent orbital frustration that inhibits the formation of a long range orbital- and charge-ordered state. Upon further cooling into the ferromagnetic-metallic state (Tc=114 K), where the polarons melt, the diffuse scattering quickly develops into a propagating, transverse optic phonon.
△ Less
Submitted 8 May, 2002;
originally announced May 2002.
-
The Structure of Nanoscale Polaron Correlations in La1.2Sr1.8Mn2O7
Authors:
B. J. Campbell,
R. Osborn,
D. N. Argyriou,
L. Vasiliu-Doloc,
J. F. Mitchell,
S. K. Sinha,
U. Ruett,
C. D. Ling,
Z. Islam,
J. W. Lynn
Abstract:
A system of strongly-interacting electron-lattice polarons can exhibit charge and orbital order at sufficiently high polaron concentrations. In this study, the structure of short-range polaron correlations in the layered colossal magnetoresistive perovskite manganite, La1.2Sr1.8Mn2O7, has been determined by a crystallographic analysis of broad satellite maxima observed in diffuse X-ray and neutr…
▽ More
A system of strongly-interacting electron-lattice polarons can exhibit charge and orbital order at sufficiently high polaron concentrations. In this study, the structure of short-range polaron correlations in the layered colossal magnetoresistive perovskite manganite, La1.2Sr1.8Mn2O7, has been determined by a crystallographic analysis of broad satellite maxima observed in diffuse X-ray and neutron scattering data. The resulting q=(0.3,0,1) modulation is a longitudinal octahedral-stretch mode, consistent with an incommensurate Jahn-Teller-coupled charge-density-wave fluctuations, that implies an unusual orbital-stripe pattern parallel to the <100> directions.
△ Less
Submitted 9 July, 2001; v1 submitted 22 June, 2001;
originally announced June 2001.
-
Charge Ordering and Phase Competition in the Layered Perovskite Lasr2mn2o7
Authors:
D. N Argyriou,
H. N. Bordallo1,
B. J. Campbell,
A. K. Cheetham,
D. E. Cox,
J. S. Gardner,
K. Hanif,
A. dos Santos,
G. F. Strouse
Abstract:
Charge-lattice fluctuations are observed in the layered perovskite manganite LaSr2Mn2O7 by Raman spectroscopy as high as 340 K and with decreasing temperature they become static and form a charge ordered (CO) phase below TCO=210 K. In the static regime, superlattice reflections are observed through neutron and x-ray diffraction with a propagation vector (h+1/4,k-1/4,l). Crystallographic analysis…
▽ More
Charge-lattice fluctuations are observed in the layered perovskite manganite LaSr2Mn2O7 by Raman spectroscopy as high as 340 K and with decreasing temperature they become static and form a charge ordered (CO) phase below TCO=210 K. In the static regime, superlattice reflections are observed through neutron and x-ray diffraction with a propagation vector (h+1/4,k-1/4,l). Crystallographic analysis of the CO state demonstrates that the degree of charge and orbital ordering in this manganite is weaker than the charge ordering in three dimensional perovskite manganites. A TN=170K a type-A antiferromagnetism (AF) develops and competes with the charge ordering, that eventually melts below T*=100K. High resolution diffraction measurements suggest that that CO- and AF-states do not coincide within the same region in the material but rather co-exist as separate phases. The transition to type-A antiferromagnetism at lower temperatures is characterized by the competition between these two phases.
△ Less
Submitted 1 December, 1999;
originally announced December 1999.