-
Quantum-centric Supercomputing for Materials Science: A Perspective on Challenges and Future Directions
Authors:
Yuri Alexeev,
Maximilian Amsler,
Paul Baity,
Marco Antonio Barroca,
Sanzio Bassini,
Torey Battelle,
Daan Camps,
David Casanova,
Young Jai Choi,
Frederic T. Chong,
Charles Chung,
Chris Codella,
Antonio D. Corcoles,
James Cruise,
Alberto Di Meglio,
Jonathan Dubois,
Ivan Duran,
Thomas Eckl,
Sophia Economou,
Stephan Eidenbenz,
Bruce Elmegreen,
Clyde Fare,
Ismael Faro,
Cristina Sanz Fernández,
Rodrigo Neumann Barros Ferreira
, et al. (102 additional authors not shown)
Abstract:
Computational models are an essential tool for the design, characterization, and discovery of novel materials. Hard computational tasks in materials science stretch the limits of existing high-performance supercomputing centers, consuming much of their simulation, analysis, and data resources. Quantum computing, on the other hand, is an emerging technology with the potential to accelerate many of…
▽ More
Computational models are an essential tool for the design, characterization, and discovery of novel materials. Hard computational tasks in materials science stretch the limits of existing high-performance supercomputing centers, consuming much of their simulation, analysis, and data resources. Quantum computing, on the other hand, is an emerging technology with the potential to accelerate many of the computational tasks needed for materials science. In order to do that, the quantum technology must interact with conventional high-performance computing in several ways: approximate results validation, identification of hard problems, and synergies in quantum-centric supercomputing. In this paper, we provide a perspective on how quantum-centric supercomputing can help address critical computational problems in materials science, the challenges to face in order to solve representative use cases, and new suggested directions.
△ Less
Submitted 19 September, 2024; v1 submitted 14 December, 2023;
originally announced December 2023.
-
Cooling low-dimensional electron systems into the microkelvin regime
Authors:
Lev V. Levitin,
Harriet van der Vliet,
Terje Theisen,
Stefanos Dimitriadis,
Marijn Lucas,
Antonio D. Corcoles,
Ján Nyéki,
Andrew J. Casey,
Graham Creeth,
Ian Farrer,
David A. Ritchie,
James T. Nicholls,
John Saunders
Abstract:
Two-dimensional electron gases (2DEGs) with high mobility, engineered in semiconductor heterostructures host a variety of ordered phases arising from strong correlations, which emerge at sufficiently low temperatures. The 2DEG can be further controlled by surface gates to create quasi-one dimensional systems, with potential spintronic applications. Here we address the long-standing challenge of co…
▽ More
Two-dimensional electron gases (2DEGs) with high mobility, engineered in semiconductor heterostructures host a variety of ordered phases arising from strong correlations, which emerge at sufficiently low temperatures. The 2DEG can be further controlled by surface gates to create quasi-one dimensional systems, with potential spintronic applications. Here we address the long-standing challenge of cooling such electrons to below 1$\,$mK, potentially important for identification of topological phases and spin correlated states. The 2DEG device was immersed in liquid $^3$He, cooled by the nuclear adiabatic demagnetization of copper. The temperature of the 2D electrons was inferred from the electronic noise in a gold wire, connected to the 2DEG by a metallic ohmic contact. With effective screening and filtering, we demonstrate a temperature of 0.9$\,\pm\,$0.1$\,$mK, with scope for significant further improvement. This platform is a key technological step, paving the way to observing new quantum phenomena, and developing new generations of nanoelectronic devices exploiting correlated electron states.
△ Less
Submitted 17 February, 2022; v1 submitted 5 October, 2021;
originally announced October 2021.
-
Circuit quantum electrodynamics (cQED) with modular quasi-lumped models
Authors:
Zlatko K. Minev,
Thomas G. McConkey,
Maika Takita,
Antonio D. Corcoles,
Jay M. Gambetta
Abstract:
Extracting the Hamiltonian of interacting quantum-information processing systems is a keystone problem in the realization of complex phenomena and large-scale quantum computers. The remarkable growth of the field increasingly requires precise, widely-applicable, and modular methods that can model the quantum electrodynamics of the physical circuits, and even of their more-subtle renormalization ef…
▽ More
Extracting the Hamiltonian of interacting quantum-information processing systems is a keystone problem in the realization of complex phenomena and large-scale quantum computers. The remarkable growth of the field increasingly requires precise, widely-applicable, and modular methods that can model the quantum electrodynamics of the physical circuits, and even of their more-subtle renormalization effects. Here, we present a computationally-efficient method satisfying these criteria. The method partitions a quantum device into compact lumped or quasi-distributed cells. Each is first simulated individually. The composite system is then reduced and mapped to a set of simple subsystem building blocks and their pairwise interactions. The method operates within the quasi-lumped approximation and, with no further approximation, systematically accounts for constraints, couplings, parameter renormalizations, and non-perturbative loading effects. We experimentally validate the method on large-scale, state-of-the-art superconducting quantum processors. We find that the full method improves the experimental agreement by a factor of two over taking standard coupling approximations when tested on the most sensitive and dressed Hamiltonian parameters of the measured devices.
△ Less
Submitted 18 March, 2021;
originally announced March 2021.
-
Active protection of a superconducting qubit with an interferometric Josephson isolator
Authors:
Baleegh Abdo,
Nicholas T. Bronn,
Oblesh Jinka,
Salvatore Olivadese,
Antonio D. Corcoles,
Vivekananda P. Adiga,
Markus Brink,
Russell E. Lake,
Xian Wu,
David P. Pappas,
Jerry M. Chow
Abstract:
Nonreciprocal microwave devices play several critical roles in high-fidelity, quantum-nondemolition (QND) measurement schemes. They separate input from output, impose unidirectional routing of readout signals, and protect the quantum systems from unwanted noise originated by the output chain. However, state-of-the-art, cryogenic circulators and isolators are disadvantageous in scalable superconduc…
▽ More
Nonreciprocal microwave devices play several critical roles in high-fidelity, quantum-nondemolition (QND) measurement schemes. They separate input from output, impose unidirectional routing of readout signals, and protect the quantum systems from unwanted noise originated by the output chain. However, state-of-the-art, cryogenic circulators and isolators are disadvantageous in scalable superconducting quantum processors because they use magnetic materials and strong magnetic fields. Here, we realize an active isolator formed by coupling two nondegenerate Josephson mixers in an interferometric scheme. Nonreciprocity is generated by applying a phase gradient between the same-frequency pumps feeding the Josephson mixers, which play the role of the magnetic field in a Faraday medium. To demonstrate the applicability of this Josephson-based isolator for quantum measurements, we incorporate it into the output line of a superconducting qubit, coupled to a fast resonator and a Purcell filter. We also utilize a wideband, superconducting directional coupler for coupling the readout signals into and out of the qubit-resonator system and a quantum-limited Josephson amplifier for boosting the readout fidelity. By using this novel quantum setup, we demonstrate fast, high-fidelity, QND measurements of the qubit while providing more than 20 dB of protection against amplified noise reflected off the Josephson amplifier.
△ Less
Submitted 16 October, 2018;
originally announced October 2018.
-
Improved superconducting qubit coherence using titanium nitride
Authors:
J. Chang,
M. R. Vissers,
A. D. Corcoles,
M. Sandberg,
J. Gao,
David W. Abraham,
Jerry M. Chow,
Jay M. Gambetta,
M. B. Rothwell,
G. A. Keefe,
Matthias Steffen,
D. P. Pappas
Abstract:
We demonstrate enhanced relaxation and dephasing times of transmon qubits, up to ~ 60 μs by fabricating the interdigitated shunting capacitors using titanium nitride (TiN). Compared to lift-off aluminum deposited simultaneously with the Josephson junction, this represents as much as a six-fold improvement and provides evidence that previous planar transmon coherence times are limited by surface lo…
▽ More
We demonstrate enhanced relaxation and dephasing times of transmon qubits, up to ~ 60 μs by fabricating the interdigitated shunting capacitors using titanium nitride (TiN). Compared to lift-off aluminum deposited simultaneously with the Josephson junction, this represents as much as a six-fold improvement and provides evidence that previous planar transmon coherence times are limited by surface losses from two-level system (TLS) defects residing at or near interfaces. Concurrently, we observe an anomalous temperature dependent frequency shift of TiN resonators which is inconsistent with the predicted TLS model.
△ Less
Submitted 17 March, 2013;
originally announced March 2013.
-
Process verification of two-qubit quantum gates by randomized benchmarking
Authors:
A. D. Córcoles,
Jay M. Gambetta,
Jerry M. Chow,
John A. Smolin,
Matthew Ware,
J. D. Strand,
B. L. T. Plourde,
M. Steffen
Abstract:
We implement a complete randomized benchmarking protocol on a system of two superconducting qubits. The protocol consists of randomizing over gates in the Clifford group, which experimentally are generated via an improved two-qubit cross-resonance gate implementation and single-qubit unitaries. From this we extract an optimal average error per Clifford of 0.0936. We also perform an interleaved exp…
▽ More
We implement a complete randomized benchmarking protocol on a system of two superconducting qubits. The protocol consists of randomizing over gates in the Clifford group, which experimentally are generated via an improved two-qubit cross-resonance gate implementation and single-qubit unitaries. From this we extract an optimal average error per Clifford of 0.0936. We also perform an interleaved experiment, alternating our optimal two-qubit gate with random two-qubit Clifford gates, to obtain a two-qubit gate error of 0.0653. We compare these values with a two-qubit gate error of ~0.12 obtained from quantum process tomography, which is likely limited by state preparation and measurement errors.
△ Less
Submitted 2 November, 2012; v1 submitted 25 October, 2012;
originally announced October 2012.
-
Entanglement of two superconducting qubits in a waveguide cavity via monochromatic two-photon excitation
Authors:
S. Poletto,
Jay M. Gambetta,
Seth T. Merkel,
John A. Smolin,
Jerry M. Chow,
A. D. Corcoles,
George A. Keefe,
Mary B. Rothwell,
J. R. Rozen,
D. W. Abraham,
Chad Rigetti,
M. Steffen
Abstract:
We report a system where fixed interactions between non-computational levels make bright the otherwise forbidden two-photon 00 --> 11 transition. The system is formed by hand selection and assembly of two discrete component transmon-style superconducting qubits inside a rectangular microwave cavity. The application of a monochromatic drive tuned to this transition induces two-photon Rabi-like osci…
▽ More
We report a system where fixed interactions between non-computational levels make bright the otherwise forbidden two-photon 00 --> 11 transition. The system is formed by hand selection and assembly of two discrete component transmon-style superconducting qubits inside a rectangular microwave cavity. The application of a monochromatic drive tuned to this transition induces two-photon Rabi-like oscillations between the ground and doubly-excited states via the Bell basis. The system therefore allows all-microwave two-qubit universal control with the same techniques and hardware required for single qubit control. We report Ramsey-like and spin echo sequences with the generated Bell states, and measure a two-qubit gate fidelity of 90% (unconstrained) and 86% (maximum likelihood estimator).
△ Less
Submitted 12 November, 2012; v1 submitted 6 August, 2012;
originally announced August 2012.
-
Characterization of addressability by simultaneous randomized benchmarking
Authors:
Jay M. Gambetta,
A. D. Corcoles,
S. T. Merkel,
B. R. Johnson,
John A. Smolin,
Jerry M. Chow,
Colm A. Ryan,
Chad Rigetti,
S. Poletto,
Thomas A. Ohki,
Mark B. Ketchen,
M. Steffen
Abstract:
The control and handling of errors arising from cross-talk and unwanted interactions in multi-qubit systems is an important issue in quantum information processing architectures. We introduce a benchmarking protocol that provides information about the amount of addressability present in the system and implement it on coupled superconducting qubits. The protocol consists of randomized benchmarking…
▽ More
The control and handling of errors arising from cross-talk and unwanted interactions in multi-qubit systems is an important issue in quantum information processing architectures. We introduce a benchmarking protocol that provides information about the amount of addressability present in the system and implement it on coupled superconducting qubits. The protocol consists of randomized benchmarking each qubit individually and then simultaneously, and the amount of addressability is related to the difference of the average gate fidelities of those experiments. We present the results on two similar samples with different amounts of cross-talk and unwanted interactions, which agree with predictions based on simple models for the amount of residual coupling.
△ Less
Submitted 2 January, 2013; v1 submitted 27 April, 2012;
originally announced April 2012.
-
Complete universal quantum gate set approaching fault-tolerant thresholds with superconducting qubits
Authors:
Jerry M. Chow,
Jay M. Gambetta,
A. D. Corcoles,
Seth T. Merkel,
John A. Smolin,
Chad Rigetti,
S. Poletto,
George A. Keefe,
Mary B. Rothwell,
J. R. Rozen,
Mark B. Ketchen,
M. Steffen
Abstract:
We use quantum process tomography to characterize a full universal set of all-microwave gates on two superconducting single-frequency single-junction transmon qubits. All extracted gate fidelities, including those for Clifford group generators, single-qubit pi/4 and pi/8 rotations, and a two-qubit controlled-NOT, exceed 95% (98%), without (with) accounting for state preparation and measurement err…
▽ More
We use quantum process tomography to characterize a full universal set of all-microwave gates on two superconducting single-frequency single-junction transmon qubits. All extracted gate fidelities, including those for Clifford group generators, single-qubit pi/4 and pi/8 rotations, and a two-qubit controlled-NOT, exceed 95% (98%), without (with) accounting for state preparation and measurement errors. Furthermore, we introduce a process map representation in the Pauli basis which is visually efficient and informative. This high-fidelity gate set serves as another critical building block towards scalable architectures of superconducting qubits for error correction schemes.
△ Less
Submitted 23 February, 2012;
originally announced February 2012.
-
Protecting superconducting qubits from external sources of loss and heat
Authors:
Antonio D. Córcoles,
Jerry M. Chow,
Jay M. Gambetta,
Chad Rigetti,
J. R. Rozen,
George A. Keefe,
Mary Beth Rothwell,
Mark B. Ketchen,
M. Steffen
Abstract:
We characterize a superconducting qubit before and after embedding it along with its package in an absorptive medium. We observe a drastic improvement in the effective qubit temperature and over a tenfold improvement in the relaxation time up to 5.7 $μ$s. Our results suggest the presence of external radiation inside the cryogenic apparatus can be a limiting factor for both qubit initialization and…
▽ More
We characterize a superconducting qubit before and after embedding it along with its package in an absorptive medium. We observe a drastic improvement in the effective qubit temperature and over a tenfold improvement in the relaxation time up to 5.7 $μ$s. Our results suggest the presence of external radiation inside the cryogenic apparatus can be a limiting factor for both qubit initialization and coherence. We infer from simple calculations that relaxation is not limited by thermal photons in the sample prior to embedding, but by dissipation arising from quasiparticle generation.
△ Less
Submitted 5 August, 2011;
originally announced August 2011.
-
A simple all-microwave entangling gate for fixed-frequency superconducting qubits
Authors:
Jerry M. Chow,
A. D. Corcoles,
Jay M. Gambetta,
Chad Rigetti,
B. R. Johnson,
John A. Smolin,
J. R. Rozen,
George A. Keefe,
Mary B. Rothwell,
Mark B. Ketchen,
M. Steffen
Abstract:
We demonstrate an all-microwave two-qubit gate on superconducting qubits which are fixed in frequency at optimal bias points. The gate requires no additional subcircuitry and is tunable via the amplitude of microwave irradiation on one qubit at the transition frequency of the other. We use the gate to generate entangled states with a maximal extracted concurrence of 0.88 and quantum process tomogr…
▽ More
We demonstrate an all-microwave two-qubit gate on superconducting qubits which are fixed in frequency at optimal bias points. The gate requires no additional subcircuitry and is tunable via the amplitude of microwave irradiation on one qubit at the transition frequency of the other. We use the gate to generate entangled states with a maximal extracted concurrence of 0.88 and quantum process tomography reveals a gate fidelity of 81%.
△ Less
Submitted 2 June, 2011;
originally announced June 2011.
-
Low Loss Superconducting Titanium Nitride Coplanar Waveguide Resonators
Authors:
Michael R. Vissers,
Jiansong Gao,
David S. Wisbey,
Dustin A. Hite,
Chang C. Tsuei,
Antonio D. Corcoles,
Matthias Steffen,
David P. Pappas
Abstract:
Thin films of TiN were sputter-deposited onto Si and sapphire wafers with and without SiN buffer layers. The films were fabricated into RF coplanar waveguide resonators, and internal quality factor measurements were taken at millikelvin temperatures in both the many photon and single photon limits, i.e. high and low power regimes, respectively. At high power, internal quality factors ($Q_i$'s) hig…
▽ More
Thin films of TiN were sputter-deposited onto Si and sapphire wafers with and without SiN buffer layers. The films were fabricated into RF coplanar waveguide resonators, and internal quality factor measurements were taken at millikelvin temperatures in both the many photon and single photon limits, i.e. high and low power regimes, respectively. At high power, internal quality factors ($Q_i$'s) higher than $10^7$ were measured for TiN with predominantly a (200)-TiN orientation. Films that showed significant (111)-TiN texture invariably had much lower $Q_i$'s, on the order of $10^5$. Our studies show that the (200)-TiN is favored for growth at high temperature on either bare Si or SiN buffer layers. However, growth on bare sapphire or Si(100) at low temperature resulted in primarily a (111)-TiN orientation. Ellipsometry and Auger measurements indicate that the (200)-TiN growth on the bare Si substrates is correlated with the formation of a thin, $\approx 2$ nm, layer of SiN during the pre-deposition procedure. In the single photon regime, $Q_i$ of these films exceeded $8\times10^5$, while thicker SiN buffer layers led to reduced $Q_i$'s at low power.
△ Less
Submitted 28 July, 2010;
originally announced July 2010.
