-
Pulsed Electron Spin Resonance of an Organic Microcrystal by Dispersive Readout
Authors:
Ailsa Keyser,
Jonathan Burnett,
Sergey Kubatkin,
Andrey Danilov,
Mark Oxborrow,
Sebastian de Graaf,
Tobias Lindström
Abstract:
We establish a testbed system for the development of high-sensitivity Electron Spin Resonance (ESR) techniques for small samples at cryogenic temperatures. Our system consists of a Niobium Nitride thin-film planar superconducting microresonator designed to have a concentrated mode volume to couple to a small amount of paramagnetic material, and to be resilient to magnetic fields of up to 400 mT. A…
▽ More
We establish a testbed system for the development of high-sensitivity Electron Spin Resonance (ESR) techniques for small samples at cryogenic temperatures. Our system consists of a Niobium Nitride thin-film planar superconducting microresonator designed to have a concentrated mode volume to couple to a small amount of paramagnetic material, and to be resilient to magnetic fields of up to 400 mT. At 65 mK we measure high-cooperativity coupling ($C \approx 19$) to an organic radical microcrystal containing $10^{12}$ spins in a pico-litre volume. We detect the spin-lattice decoherence rate via the dispersive frequency shift of the resonator. Techniques such as these could be suitable for applications in quantum information as well as for pulsed ESR interrogation of very few spins and could provide insights into the surface chemistry of, for example, the material defects in superconducting quantum processors.
△ Less
Submitted 22 October, 2020; v1 submitted 15 September, 2020;
originally announced September 2020.
-
Stability of superconducting resonators: motional narrowing and the role of Landau-Zener driving of two-level defects
Authors:
David Niepce,
Jonathan J. Burnett,
Marina Kudra,
Jared H. Cole,
Jonas Bylander
Abstract:
Frequency instability of superconducting resonators and qubits leads to dephasing and time-varying energy-loss and hinders quantum-processor tune-up. Its main source is dielectric noise originating in surface oxides. Thorough noise studies are needed in order to develop a comprehensive understanding and mitigation strategy of these fluctuations. Here we use a frequency-locked loop to track the res…
▽ More
Frequency instability of superconducting resonators and qubits leads to dephasing and time-varying energy-loss and hinders quantum-processor tune-up. Its main source is dielectric noise originating in surface oxides. Thorough noise studies are needed in order to develop a comprehensive understanding and mitigation strategy of these fluctuations. Here we use a frequency-locked loop to track the resonant-frequency jitter of three different resonator types---one niobium-nitride superinductor, one aluminium coplanar waveguide, and one aluminium cavity---and we observe strikingly similar random-telegraph-signal fluctuations. At low microwave drive power, the resonators exhibit multiple, unstable frequency positions, which for increasing power coalesce into one frequency due to motional narrowing caused by sympathetic driving of individual two-level-system defects by the resonator. In all three devices we probe a dominant fluctuator, finding that its amplitude saturates with increasing drive power, but its characteristic switching rate follows the power-law dependence of quasiclassical Landau-Zener transitions.
△ Less
Submitted 16 August, 2020;
originally announced August 2020.
-
High Quality 3-Dimensional Aluminum Microwave Cavities
Authors:
M. Kudra,
J. Biznárová,
F. Roudsari,
J. J. Burnett,
D. Niepce,
S. Gasparinetti,
B. Wickman,
P. Delsing
Abstract:
We present a comprehensive study of internal quality factors in superconducting stub-geometry 3-dimensional cavities made of aluminum. We use wet etching, annealing and electrochemichal polishing to improve the as machined quality factor. We find that the dominant loss channel is split between two-level system loss and an unknown source with 60:40 proportion. A total of 17 cavities of different pu…
▽ More
We present a comprehensive study of internal quality factors in superconducting stub-geometry 3-dimensional cavities made of aluminum. We use wet etching, annealing and electrochemichal polishing to improve the as machined quality factor. We find that the dominant loss channel is split between two-level system loss and an unknown source with 60:40 proportion. A total of 17 cavities of different purity, resonance frequency and size were studied. Our treatment results in reproducible cavities, with ten of them showing internal quality factors above 80 million at a power corresponding to an average of a single photon in the cavity. The best cavity has an internal quality factor of 115 million at single photon level.
△ Less
Submitted 3 June, 2020;
originally announced June 2020.
-
Two-level systems in superconducting quantum devices due to trapped quasiparticles
Authors:
S. E. de Graaf,
L. Faoro,
L. B. Ioffe,
S. Mahashabde,
J. J. Burnett,
T. Lindström,
S. E. Kubatkin,
A. V. Danilov,
A. Ya. Tzalenchuk
Abstract:
A major issue for the implementation of large scale superconducting quantum circuits is the interaction with interfacial two-level system defects (TLS) that leads to qubit relaxation and impedes qubit operation in certain frequency ranges that also drift in time. Another major challenge comes from non-equilibrium quasiparticles (QPs) that result in qubit dephasing and relaxation. In this work we s…
▽ More
A major issue for the implementation of large scale superconducting quantum circuits is the interaction with interfacial two-level system defects (TLS) that leads to qubit relaxation and impedes qubit operation in certain frequency ranges that also drift in time. Another major challenge comes from non-equilibrium quasiparticles (QPs) that result in qubit dephasing and relaxation. In this work we show that such QPs can also serve as a source of TLS. Using spectral and temporal mapping of TLS-induced fluctuations in frequency tunable resonators, we identify a subset of the general TLS population that are highly coherent TLS with a low reconfiguration temperature $\sim$ 300 mK, and a non-uniform density of states. These properties can be understood if these TLS are formed by QPs trapped in shallow subgap states formed by spatial fluctutations of the superconducting order parameter $Δ$. Magnetic field measurements of one such TLS reveals a link to superconductivity. Our results imply that trapped QPs can induce qubit relaxation.
△ Less
Submitted 6 April, 2020;
originally announced April 2020.
-
Phononic loss in superconducting resonators on piezoelectric substrates
Authors:
Marco Scigliuzzo,
Laure E. Bruhat,
Andreas Bengtsson,
Jonathan J. Burnett,
Anita Fadavi Roudsari,
Per Delsing
Abstract:
We numerically and experimentally investigate the phononic loss for superconducting resonators fabricated on a piezoelectric substrate. With the help of finite element method simulations, we calculate the energy loss due to electromechanical conversion into bulk and surface acoustic waves. This sets an upper limit for the resonator internal quality factor $Q_i$. To validate the simulation, we fabr…
▽ More
We numerically and experimentally investigate the phononic loss for superconducting resonators fabricated on a piezoelectric substrate. With the help of finite element method simulations, we calculate the energy loss due to electromechanical conversion into bulk and surface acoustic waves. This sets an upper limit for the resonator internal quality factor $Q_i$. To validate the simulation, we fabricate quarter wavelength coplanar waveguide resonators on GaAs and measure $Q_i$ as function of frequency, power and temperature. We observe a linear increase of $Q_i$ with frequency, as predicted by the simulations for a constant electromechanical coupling. Additionally, $Q_i$ shows a weak power dependence and a negligible temperature dependence around 10$\,$mK, excluding two level systems and non-equilibrium quasiparticles as the main source of losses at that temperature.
△ Less
Submitted 19 December, 2019;
originally announced December 2019.
-
Characterizing decoherence rates of a superconducting qubit by direct microwave scattering
Authors:
Yong Lu,
Andreas Bengtsson,
Jonathan J. Burnett,
Emely Wiegand,
Baladitya Suri,
Philip Krantz,
Anita Fadavi Roudsari,
Anton Frisk Kockum,
Simone Gasparinetti,
Göran Johansson,
Per Delsing
Abstract:
We experimentally investigate a superconducting qubit coupled to the end of an open transmission line, in a regime where the qubit decay rates to the transmission line and to its own environment are comparable. We perform measurements of coherent and incoherent scattering, on- and off-resonant fluorescence, and time-resolved dynamics to determine the decay and decoherence rates of the qubit. In pa…
▽ More
We experimentally investigate a superconducting qubit coupled to the end of an open transmission line, in a regime where the qubit decay rates to the transmission line and to its own environment are comparable. We perform measurements of coherent and incoherent scattering, on- and off-resonant fluorescence, and time-resolved dynamics to determine the decay and decoherence rates of the qubit. In particular, these measurements let us discriminate between non-radiative decay and pure dephasing. We combine and contrast results across all methods and find consistent values for the extracted rates. The results show that the pure dephasing rate is one order of magnitude smaller than the non-radiative decay rate for our qubit. Our results indicate a pathway to benchmark decoherence rates of superconducting qubits in a resonator-free setting.
△ Less
Submitted 4 December, 2019;
originally announced December 2019.
-
Geometric Scaling of Two-Level-System Loss in Superconducting Resonators
Authors:
David Niepce,
Jonathan Burnett,
Martí Gutierrez Latorre,
Jonas Bylander
Abstract:
We perform an experimental and numerical study of dielectric loss in superconducting microwave resonators at low temperature. Dielectric loss, due to two-level systems, is a limiting factor in several applications, e.g. superconducting qubits, Josephson parametric amplifiers, microwave kinetic-inductance detectors, and superconducting single-photon detectors. Our devices are made of disordered NbN…
▽ More
We perform an experimental and numerical study of dielectric loss in superconducting microwave resonators at low temperature. Dielectric loss, due to two-level systems, is a limiting factor in several applications, e.g. superconducting qubits, Josephson parametric amplifiers, microwave kinetic-inductance detectors, and superconducting single-photon detectors. Our devices are made of disordered NbN, which, due to magnetic-field penetration, necessitates 3D finite-element simulation of the Maxwell--London equations at microwave frequencies to accurately model the current density and electric field distribution. From the field distribution, we compute the geometric filling factors of the lossy regions in our resonator structures and fit the experimental data to determine the intrinsic loss tangents of its interfaces and dielectrics. We emphasise that the loss caused by a spin-on-glass resist such as hydrogen silsesquioxane (HSQ), used for ultrahigh lithographic resolution relevant to the fabrication of nanowires, and find that, when used, HSQ is the dominant source of loss, with a loss tangent of $δ^i_{HSQ} = 8 \times 10^{-3}$.
△ Less
Submitted 7 August, 2019;
originally announced August 2019.
-
Decoherence benchmarking of superconducting qubits
Authors:
Jonathan Burnett,
Andreas Bengtsson,
Marco Scigliuzzo,
David Niepce,
Marina Kudra,
Per Delsing,
Jonas Bylander
Abstract:
We benchmark the decoherence of superconducting qubits to examine the temporal stability of energy-relaxation and dephasing. By collecting statistics during measurements spanning multiple days, we find the mean parameters $\overline{T_{1}}$ = 49 $μ$s and $\overline{T_{2}^{*}}$ = 95 $μ$s, however, both of these quantities fluctuate explaining the need for frequent re-calibration in qubit setups. Ou…
▽ More
We benchmark the decoherence of superconducting qubits to examine the temporal stability of energy-relaxation and dephasing. By collecting statistics during measurements spanning multiple days, we find the mean parameters $\overline{T_{1}}$ = 49 $μ$s and $\overline{T_{2}^{*}}$ = 95 $μ$s, however, both of these quantities fluctuate explaining the need for frequent re-calibration in qubit setups. Our main finding is that fluctuations in qubit relaxation are local to the qubit and are caused by instabilities of near-resonant two-level-systems (TLS). Through statistical analysis, we determine switching rates of these TLS and observe the coherent coupling between an individual TLS and a transmon qubit. Finally, we find evidence that the qubit's frequency stability is limited by capacitance noise. Importantly, this produces a 0.8 ms limit on the pure dephasing which we also observe. Collectively, these findings raise the need for performing qubit metrology to examine the reproducibility of qubit parameters, where these fluctuations could affect qubit gate fidelity.
△ Less
Submitted 13 May, 2019; v1 submitted 14 January, 2019;
originally announced January 2019.
-
Tunable Nb superconducting resonators based upon a Ne-FIB-fabricated constriction nanoSQUID
Authors:
Oscar W. Kennedy,
Jonathan Burnett,
Jonathan C. Fenton,
Nicolas G. N. Constantino,
Paul A. Warburton,
John J. L. Morton,
Eva Dupont-Ferrier
Abstract:
Hybrid superconducting--spin systems offer the potential to combine highly coherent atomic quantum systems with the scalability of superconducting circuits. To fully exploit this potential requires a high quality-factor microwave resonator, tunable in frequency and able to operate at magnetic fields optimal for the spin system. Such magnetic fields typically rule out conventional Al-based Josephso…
▽ More
Hybrid superconducting--spin systems offer the potential to combine highly coherent atomic quantum systems with the scalability of superconducting circuits. To fully exploit this potential requires a high quality-factor microwave resonator, tunable in frequency and able to operate at magnetic fields optimal for the spin system. Such magnetic fields typically rule out conventional Al-based Josephson junction devices that have previously been used for tunable high-$Q$ microwave resonators. The larger critical field of niobium (Nb) allows microwave resonators with large field resilience to be fabricated. Here, we demonstrate how constriction-type weak links, patterned in parallel into the central conductor of a Nb coplanar resonator using a neon focused ion beam (FIB), can be used to implement a frequency-tunable resonator. We study transmission through two such devices and show how they realise high quality factor, tunable, field resilient devices which hold promise for future applications coupling to spin systems.
△ Less
Submitted 7 January, 2019; v1 submitted 2 July, 2018;
originally announced July 2018.
-
High Kinetic Inductance NbN Nanowire Superinductors
Authors:
David Niepce,
Jonathan Burnett,
Jonas Bylander
Abstract:
We demonstrate that a high kinetic inductance disordered superconductor can realize a low microwave loss, non-dissipative circuit element with an impedance greater than the quantum resistance ($R_Q = h/4e^2 \simeq 6.5kΩ$). This element, known as a superinductor, can produce a quantum circuit where charge fluctuations are suppressed. The superinductor consists of a 40 nm wide niobium nitride nanowi…
▽ More
We demonstrate that a high kinetic inductance disordered superconductor can realize a low microwave loss, non-dissipative circuit element with an impedance greater than the quantum resistance ($R_Q = h/4e^2 \simeq 6.5kΩ$). This element, known as a superinductor, can produce a quantum circuit where charge fluctuations are suppressed. The superinductor consists of a 40 nm wide niobium nitride nanowire and exhibits a single photon quality factor of $2.5 \times 10^4$. Furthermore, by examining loss rates, we demonstrate that the dissipation of our nanowire devices can be fully understood in the framework of two-level system loss.
△ Less
Submitted 5 February, 2018;
originally announced February 2018.
-
Noise and loss of superconducting aluminium resonators at single photon energies
Authors:
Jonathan Burnett,
Andreas Bengtsson,
David Niepce,
Jonas Bylander
Abstract:
The loss and noise mechanisms of superconducting resonators are useful tools for understanding decoherence in superconducting circuits. While the loss mechanisms have been heavily studied, noise in superconducting resonators has only recently been investigated. In particular, there is an absence of literature on noise in the single photon limit. Here, we measure the loss and noise of an aluminium…
▽ More
The loss and noise mechanisms of superconducting resonators are useful tools for understanding decoherence in superconducting circuits. While the loss mechanisms have been heavily studied, noise in superconducting resonators has only recently been investigated. In particular, there is an absence of literature on noise in the single photon limit. Here, we measure the loss and noise of an aluminium on silicon quarter-wavelength ($λ/4$) resonator in the single photon regime.
△ Less
Submitted 30 January, 2018;
originally announced January 2018.
-
Low-Loss Superconducting Nanowire Circuits Using a Neon Focused Ion Beam
Authors:
Jonathan Burnett,
James Sagar,
Oscar W. Kennedy,
Paul A. Warburton,
Jonathan C. Fenton
Abstract:
We present low-temperature measurements of low-loss superconducting nanowire-embedded resonators in the low-power limit relevant for quantum circuits. The superconducting resonators are embedded with superconducting nanowires with widths down to 20nm using a neon focused ion beam. In the low-power limit, we demonstrate an internal quality factor up to 3.9x10^5 at 300mK [implying a two-level-system…
▽ More
We present low-temperature measurements of low-loss superconducting nanowire-embedded resonators in the low-power limit relevant for quantum circuits. The superconducting resonators are embedded with superconducting nanowires with widths down to 20nm using a neon focused ion beam. In the low-power limit, we demonstrate an internal quality factor up to 3.9x10^5 at 300mK [implying a two-level-system-limited quality factor up to 2x10^5 at 10 mK], not only significantly higher than in similar devices but also matching the state of the art of conventional Josephson-junction-embedded resonators. We also show a high sensitivity of the nanowire to stray infrared photons, which is controllable by suitable precautions to minimize stray photons in the sample environment. Our results suggest that there are excellent prospects for superconducting-nanowire-based quantum circuits.
△ Less
Submitted 8 August, 2017;
originally announced August 2017.
-
Suppression of 1/f noise in solid state quantum devices by surface spin desorption
Authors:
S. E. de Graaf,
L. Faoro,
J. Burnett,
A. A. Adamyan,
A. Ya. Tzalenchuk,
S. E. Kubatkin,
T. Lindström,
A. V. Danilov
Abstract:
Noise and decoherence due to spurious two-level systems (TLS) located at material interfaces is a long-standing issue in solid state quantum technologies. Efforts to mitigate the effects of TLS have been hampered by a lack of surface analysis tools sensitive enough to identify their chemical and physical nature. Here we measure the dielectric loss, frequency noise and electron spin resonance (ESR)…
▽ More
Noise and decoherence due to spurious two-level systems (TLS) located at material interfaces is a long-standing issue in solid state quantum technologies. Efforts to mitigate the effects of TLS have been hampered by a lack of surface analysis tools sensitive enough to identify their chemical and physical nature. Here we measure the dielectric loss, frequency noise and electron spin resonance (ESR) spectrum in superconducting resonators and demonstrate that desorption of surface spins is accompanied by an almost tenfold reduction in the frequency noise. We provide experimental evidence that simultaneously reveals the chemical signatures of adsorbed magnetic moments and demonstrates their coupling via the electric-field degree of freedom to the resonator, causing dielectric (charge) noise in solid state quantum devices.
△ Less
Submitted 25 May, 2017;
originally announced May 2017.
-
Analysis of high quality superconducting resonators: consequences for TLS properties in amorphous oxides
Authors:
Jonathan Burnett,
Lara Faoro,
Tobias Lindstrom
Abstract:
$1/f$ noise caused by microscopic Two-Level Systems (TLS) is known to be very detrimental to the performance of superconducting quantum devices but the nature of these TLS is still poorly understood. Recent experiments with superconducting resonators indicates that interaction between TLS in the oxide at the film-substrate interface is not negligible. Here we present data on the loss and $1/f$ fre…
▽ More
$1/f$ noise caused by microscopic Two-Level Systems (TLS) is known to be very detrimental to the performance of superconducting quantum devices but the nature of these TLS is still poorly understood. Recent experiments with superconducting resonators indicates that interaction between TLS in the oxide at the film-substrate interface is not negligible. Here we present data on the loss and $1/f$ frequency noise from two different Nb resonators with and without Pt capping and discuss what conclusions can be drawn regarding the properties of TLS in amorphous oxides. We also estimate the concentration and dipole moment of the TLS.
△ Less
Submitted 8 December, 2015;
originally announced December 2015.
-
Evidence for interacting two-level systems from the 1/f noise of a superconducting resonator
Authors:
J. Burnett,
L. Faoro,
I. Wisby,
V. L. Gurtovoi,
A. V. Chernykh,
G. M. Mikhailov,
V. A. Tulin,
R. Shaikhaidarov,
V. Antonov,
P. J. Meeson,
A. Ya. Tzalenchuk,
T. Lindstrom
Abstract:
Here we find the increase in 1/f noise of superconducting resonators at low temperatures to be completely incompatible with the standard tunneling model (STM) of Two Level Systems (TLS), which has been used to describe low-frequency noise for over three decades. We revise the STM to include a significant TLS - TLS interaction. The new model is able to explain the temperature and power dependence o…
▽ More
Here we find the increase in 1/f noise of superconducting resonators at low temperatures to be completely incompatible with the standard tunneling model (STM) of Two Level Systems (TLS), which has been used to describe low-frequency noise for over three decades. We revise the STM to include a significant TLS - TLS interaction. The new model is able to explain the temperature and power dependence of noise in our measurements, as well as recent studies of individual TLS lifetimes using superconducting qubits. The measurements were made possible by implementing an ultra-stable frequency-tracking technique used in atomic clocks and by producing a superconducting resonator insensitive to temperature fluctuations. The latter required an epitaxially grown Nb film with a Pt capping layer to minimize detrimental oxides at all interfaces.
△ Less
Submitted 7 November, 2013;
originally announced November 2013.
-
Coagulation kinetics beyond mean field theory using an optimised Poisson representation
Authors:
James Burnett,
Ian J. Ford
Abstract:
Binary particle coagulation can be modelled as the repeated random process of the combination of two particles to form a third. The kinetics can be represented by population rate equations based on a mean field assumption, according to which the rate of aggregation is taken to be proportional to the product of the mean populations of the two participants. This can be a poor approximation when the…
▽ More
Binary particle coagulation can be modelled as the repeated random process of the combination of two particles to form a third. The kinetics can be represented by population rate equations based on a mean field assumption, according to which the rate of aggregation is taken to be proportional to the product of the mean populations of the two participants. This can be a poor approximation when the mean populations are small. However, using the Poisson representation it is possible to derive a set of rate equations that go beyond mean field theory, describing pseudo-populations that are continuous, noisy and complex, but where averaging over the noise and initial conditions gives the mean of the physical population. Such an approach is explored for the simple case of a size-independent rate of coagulation between particles. Analytical results are compared with numerical computations and with results derived by other means. In the numerical work we encounter instabilities that can be eliminated using a suitable 'gauge' transformation of the problem [P. D. Drummond, Eur. Phys. J. B38, 617 (2004)] which we show to be equivalent to the application of the Cameron-Martin-Girsanov formula describing a shift in a probability measure. The cost of such a procedure is to introduce additional statistical noise into the numerical results, but we identify an optimised gauge transformation where this difficulty is minimal for the main properties of interest. For more complicated systems, such an approach is likely to be computationally cheaper than Monte Carlo simulation.
△ Less
Submitted 22 May, 2015; v1 submitted 10 December, 2012;
originally announced December 2012.
-
Slow noise processes in superconducting resonators
Authors:
Jonathan Burnett,
Tobias Lindström,
Mark Oxborrow,
Yuichi Harada,
Yoshiaki Sekine,
Phil Meeson,
Alexander Ya. Tzalenchuk
Abstract:
Slow noise processes, with characteristic timescales ~1s, have been studied in planar superconducting resonators. A frequency locked loop is employed to track deviations of the resonator centre frequency with high precision and bandwidth. Comparative measurements are made in varying microwave drive, temperature and between bare resonators and those with an additional dielectric layer. All resonato…
▽ More
Slow noise processes, with characteristic timescales ~1s, have been studied in planar superconducting resonators. A frequency locked loop is employed to track deviations of the resonator centre frequency with high precision and bandwidth. Comparative measurements are made in varying microwave drive, temperature and between bare resonators and those with an additional dielectric layer. All resonators are found to exhibit flicker frequency noise which increases with decreasing microwave drive. We also show that an increase in temperature results in a saturation of flicker noise in resonators with an additional dielectric layer, while bare resonators stop exhibiting flicker noise instead showing a random frequency walk process.
△ Less
Submitted 9 April, 2013; v1 submitted 8 October, 2012;
originally announced October 2012.
-
Stochastic Gene Expression in a Lentiviral Positive Feedback Loop: HIV-1 Tat Fluctuations Drive Phenotypic Diversity
Authors:
Leor S. Weinberger,
John C. Burnett,
Jared E. Toettcher,
Adam P. Arkin,
David V. Schaffer
Abstract:
Stochastic gene expression has been implicated in a variety of cellular processes, including cell differentiation and disease. In this issue of Cell, Weinberger et al. (2005) take an integrated computational-experimental approach to study the Tat transactivation feedback loop in HIV-1 and show that fluctuations in a key regulator, Tat, can result in a phenotypic bifurcation. This phenomenon is o…
▽ More
Stochastic gene expression has been implicated in a variety of cellular processes, including cell differentiation and disease. In this issue of Cell, Weinberger et al. (2005) take an integrated computational-experimental approach to study the Tat transactivation feedback loop in HIV-1 and show that fluctuations in a key regulator, Tat, can result in a phenotypic bifurcation. This phenomenon is observed in an isogenic population where individual cells display two distinct expression states corresponding to latent and productive infection by HIV-1. These findings demonstrate the importance of stochastic gene expression in molecular "decision-making."
△ Less
Submitted 1 August, 2006;
originally announced August 2006.