-
Strong Fiber from Uniaxial Fullerene Supramolecules Aligned with Carbon Nanotubes
Authors:
John Bulmer,
Michelle Durán-Chaves,
Daniel M. Long,
Jeremiah Lipp,
Steven Williams,
Mitchell Trafford,
Anthony Pelton,
Jared Shank,
Benji Maruyama,
Larry Drummy,
Matteo Pasquali,
Hilmar Koerner,
Timothy Haugan
Abstract:
Carbon nanotube (CNT) wires approach copper's specific conductivity and surpass carbon fiber's strength, with further improvement anticipated with greater aspect ratios and incorporation of dopants with long-range structural order. Fullerenes assemble into multitudes of process-dependent supramolecular crystals and, while initially insulating, they become marginally conductive (up to 0.05 MSm…
▽ More
Carbon nanotube (CNT) wires approach copper's specific conductivity and surpass carbon fiber's strength, with further improvement anticipated with greater aspect ratios and incorporation of dopants with long-range structural order. Fullerenes assemble into multitudes of process-dependent supramolecular crystals and, while initially insulating, they become marginally conductive (up to 0.05 MSm$^{-1}$) and superconductive ($T_c=18^\circ$K with K and 28$^\circ$K with Rb) after doping. These were small (100's $μ$m long), soft (hardness comparable to indium), and typically unaligned, which hindered development of fullerene based wires. Individual fullerenes were previously incorporated into CNT fibers, although randomly without self-assembly into supramolecules. Here, a simple variation in established CNT acid extrusion creates a fiber composed of uniaxial chains of aligned fullerene supramolecules, self-assembled between aligned few-walled CNT bundles. This will provide a testbed for novel fullerene wire transport and prospects in CNT wire advancement.
△ Less
Submitted 20 February, 2023;
originally announced February 2023.
-
Quantum simulation of thermodynamics in an integrated quantum photonic processor
Authors:
F. H. B. Somhorst,
R. van der Meer,
M. Correa Anguita,
R. Schadow,
H. J. Snijders,
M. de Goede,
B. Kassenberg,
P. Venderbosch,
C. Taballione,
J. P. Epping,
H. H. van den Vlekkert,
J. Timmerhuis,
J. F. F. Bulmer,
J. Lugani,
I. A. Walmsley,
P. W. H. Pinkse,
J. Eisert,
N. Walk,
J. J. Renema
Abstract:
One of the core questions of quantum physics is how to reconcile the unitary evolution of quantum states, which is information-preserving and time-reversible, with evolution following the second law of thermodynamics, which, in general, is neither. The resolution to this paradox is to recognize that global unitary evolution of a multi-partite quantum state causes the state of local subsystems to e…
▽ More
One of the core questions of quantum physics is how to reconcile the unitary evolution of quantum states, which is information-preserving and time-reversible, with evolution following the second law of thermodynamics, which, in general, is neither. The resolution to this paradox is to recognize that global unitary evolution of a multi-partite quantum state causes the state of local subsystems to evolve towards maximum-entropy states. In this work, we experimentally demonstrate this effect in linear quantum optics by simultaneously showing the convergence of local quantum states to a generalized Gibbs ensemble constituting a maximum-entropy state under precisely controlled conditions, while introducing an efficient certification method to demonstrate that the state retains global purity. Our quantum states are manipulated by a programmable integrated quantum photonic processor, which simulates arbitrary non-interacting Hamiltonians, demonstrating the universality of this phenomenon. Our results show the potential of photonic devices for quantum simulations involving non-Gaussian states.
△ Less
Submitted 31 August, 2023; v1 submitted 31 December, 2021;
originally announced January 2022.
-
MOCVD growth of N-polar GaN on on-axis sapphire substrate: impact of AlN nucleation layer on GaN surface hillock density
Authors:
Jonathan Marini,
Jeffrey Leathersich,
Isra Mahaboob,
John Bulmer,
Neil Newman,
F.,
Shahedipour-Sandvik
Abstract:
We report on the impact of growth conditions on surface hillock density of N-polar GaN grown on nominally on-axis (0001) sapphire substrate by metal organic chemical vapor deposition (MOCVD). Large reduction in hillock density was achieved by implementation of an optimized high temperature AlN nucleation layer and use of indium surfactant in GaN overgrowth. A reduction by more than a factor of fiv…
▽ More
We report on the impact of growth conditions on surface hillock density of N-polar GaN grown on nominally on-axis (0001) sapphire substrate by metal organic chemical vapor deposition (MOCVD). Large reduction in hillock density was achieved by implementation of an optimized high temperature AlN nucleation layer and use of indium surfactant in GaN overgrowth. A reduction by more than a factor of five in hillock density from 1000 to 170 hillocks/cm$^{-2}$ was achieved as a result. Crystal quality and surface morphology of the resultant GaN films were characterized by high resolution x-ray diffraction and atomic force microscopy and found to be relatively unaffected by the buffer conditions. It is also shown that the density of smaller surface features is unaffected by AlN buffer conditions.
△ Less
Submitted 11 May, 2017;
originally announced May 2017.
-
Emergence of dissipative structures in current-carrying superconducting wires
Authors:
G. A. Levin,
P. N. Barnes,
J. P. Rodriguez,
J. A. Connors,
J. S. Bulmer
Abstract:
We discuss the emergence of a spontaneous temperature and critical current spatial modulation in current-carrying high temperature superconducting wire. The modulation of the critical current along the wire on a scale of 3 - 10 mm forces a fraction of the transport current to crisscross the resistive interface between the superconducting film and normal metal stabilizer attached to it. This gene…
▽ More
We discuss the emergence of a spontaneous temperature and critical current spatial modulation in current-carrying high temperature superconducting wire. The modulation of the critical current along the wire on a scale of 3 - 10 mm forces a fraction of the transport current to crisscross the resistive interface between the superconducting film and normal metal stabilizer attached to it. This generates additional heat that allows such a structure to be self sustainable. Stability and the conditions for experimental observation of this phenomenon are also discussed.
△ Less
Submitted 22 April, 2009;
originally announced April 2009.
-
Stability and normal zone propagation speed in YBCO coated conductors with increased interfacial resistance
Authors:
George A. Levin,
Paul N. Barnes,
Jose P. Rodriguez,
Jake A. Connors,
John S. Bulmer
Abstract:
We will discuss how stability and speed of normal zone propagation in YBCO-coated conductors is affected by interfacial resistance between the superconducting film and the stabilizer. Our numerical simulation has shown that the increased interfacial resistance substantially increases speed of normal zone propagation and decreases the stability margins. Optimization of the value of the resistance…
▽ More
We will discuss how stability and speed of normal zone propagation in YBCO-coated conductors is affected by interfacial resistance between the superconducting film and the stabilizer. Our numerical simulation has shown that the increased interfacial resistance substantially increases speed of normal zone propagation and decreases the stability margins. Optimization of the value of the resistance may lead to a better compromise between stability and quench protection requirements than what is found in currently manufactured coated conductors.
△ Less
Submitted 4 November, 2008; v1 submitted 25 August, 2008;
originally announced August 2008.
-
Current sharing between superconducting film and normal metal
Authors:
George A. Levin,
Paul N. Barnes,
John S. Bulmer
Abstract:
A two-dimensional model is introduced that describes current sharing between the superconducting and normal metal layers in configuration typical of YBCO-coated conductors. The model is used to compare the effectiveness of surround stabilizer and more conventional one-sided stabilizer. When the resistance of the interface between the superconductor and stabilizer is low enough, the surround stab…
▽ More
A two-dimensional model is introduced that describes current sharing between the superconducting and normal metal layers in configuration typical of YBCO-coated conductors. The model is used to compare the effectiveness of surround stabilizer and more conventional one-sided stabilizer. When the resistance of the interface between the superconductor and stabilizer is low enough, the surround stabilizer is less effective than the one-sided stabilizer in stabilizing a hairline crack in the superconducting film.
△ Less
Submitted 7 March, 2007;
originally announced March 2007.
