-
Structure, magnetic and transport properties of Ti-substituted La0.7Sr0.3MnO3
Authors:
M. S. Kim,
J. B. Yang,
Q. Cai,
X. D. Zhou,
W. J. James,
W. B. Yelon,
P. E. Parris,
D. Buddhikot,
S. K. Malik
Abstract:
Ti-substituted perovskites, La0.7Sr0.3Mn1-xTixO3, with x between 0 to 0.20, were investigated by neutron diffraction, magnetization, electric resistivity, and magnetoresistance (MR) measurements. All samples show a rhombohedral structure (space group R3c) from 10 K to room temperature. At room temperature, the cell parameters a, c and the unit cell volume increase with increasing Ti content. How…
▽ More
Ti-substituted perovskites, La0.7Sr0.3Mn1-xTixO3, with x between 0 to 0.20, were investigated by neutron diffraction, magnetization, electric resistivity, and magnetoresistance (MR) measurements. All samples show a rhombohedral structure (space group R3c) from 10 K to room temperature. At room temperature, the cell parameters a, c and the unit cell volume increase with increasing Ti content. However, at 10 K, the cell parameter a has a maximum value for x = 0.10, and decreases for x greater than 0.10, while the unit cell volume remains nearly constant for x greater than 0.10. The average (Mn,Ti)-O bond length increases up to x=0.15, and the (Mn,Ti)-O-(Mn,Ti) bond angle decreases with increasing Ti content to its minimum value at x=0.15 at room temperature. Below the Curie temperature T_C, the resistance exhibits metallic behavior for the x _ 0.05 samples. A metal (semiconductor) to insulator transition is observed for the x_ 0.10 samples. A peak in resistivity appears below T_C for all samples, and shifts to a lower temperature as x increases. The substitution of Mn by Ti decreases the 2p-3d hybridization between O and Mn ions, reduces the bandwidth W, and increases the electron-phonon coupling. Therefore, the TC shifts to a lower temperature and the resistivity increases with increasing Ti content. A field-induced shift of the resistivity maximum occurs at x less than or equal to 0.10. The maximum MR effect is about 70% for La0.7Sr0.3Mn0.8Ti0.2O3. The separation of TC and the resistivity maximum temperature Tmax enhances the MR effect in these compounds due to the weak coupling between the magnetic ordering and the resistivity as compared with La0.7Sr0.3MnO3.
△ Less
Submitted 9 February, 2005;
originally announced February 2005.
-
The effect of Cu-doping on the magnetic and transport properties of La0.7Sr0.3MnO3
Authors:
M. S. Kim,
J. B. Yang,
Q. Cai,
X. D. Zhou,
W. J. James,
W. B. Yelon,
P. E. Parris,
D. Buddhikot,
S. K. Malik
Abstract:
The effects of Cu-doping on the structural, magnetic, and transport properties of La0.7Sr0.3Mn1-xCuxO3 (0 < x < 0.20) have been studied using neutron diffraction, magnetization and magnetoresistance (MR) measurements. All samples show the rhombohedral structure with the R3c space-group from 10K to room temperature (RT). Neutron diffraction data suggest that some of the Cu ions have a Cu3+ state…
▽ More
The effects of Cu-doping on the structural, magnetic, and transport properties of La0.7Sr0.3Mn1-xCuxO3 (0 < x < 0.20) have been studied using neutron diffraction, magnetization and magnetoresistance (MR) measurements. All samples show the rhombohedral structure with the R3c space-group from 10K to room temperature (RT). Neutron diffraction data suggest that some of the Cu ions have a Cu3+ state in these compounds. The substitution of Mn by Cu affects the Mn-O bond length and Mn-O-Mn bond angle resulting from the minimization of the distortion of the MnO6 octahedron. Resistivity measurements show that a metal to insulator transition occurs for the x more than 0.15 samples. The x = 0.15 sample shows the highest MR(_80%), which might result from the co-existence of Cu3+/Cu2+ and the dilution effect of Cu-doping on the double exchange interaction.
△ Less
Submitted 9 February, 2005;
originally announced February 2005.
-
Resistivity and Thermoelectric power of NaxCoO2 (x =1.0, 0.7 and 0.6) system
Authors:
H. Kishan,
V. P. S. Awana,
M. A. Ansari,
Anurag Gupta,
R. B. Saxena,
V. Ganesan,
A. V. Narlikar,
C. A. Cardoso,
R. Nirmala,
Devendra Buddhikot,
S. K. Malik
Abstract:
Results of thermo-electric power (S) and electrical resistivity (r) measurements are reported on NaxCoO2 compounds with x = 1.0, 0.7 and 0.6. These are single-phase compounds crystallizing in the hexagonal structure (space group P63/mmc) at room temperature. Thermo-electric power values at 300K (S300K) are, 80mV/K, 39mV/K and 37mV/K for x = 1.0, 0.7 and 0.6 samples, respectively. The samples wit…
▽ More
Results of thermo-electric power (S) and electrical resistivity (r) measurements are reported on NaxCoO2 compounds with x = 1.0, 0.7 and 0.6. These are single-phase compounds crystallizing in the hexagonal structure (space group P63/mmc) at room temperature. Thermo-electric power values at 300K (S300K) are, 80mV/K, 39mV/K and 37mV/K for x = 1.0, 0.7 and 0.6 samples, respectively. The samples with x=0.7 and 1.0 are metallic down to 5 K, while the x = 0.6 sample is semiconducting. The value of r300K for x = 1.0 sample is \~0.895 mW-cm and the power factor (S2/r) is = 7.04 x 10-3 W/mK2 which qualifies it as a good thermo-electric material. In x =1.0 sample, S(T) is positive throughout 300-5K temperature range and decreases monotonically to zero as temperature T= 0. In contrast, S(T) of x = 0.7 and 0.6 samples changes sign and shows negative values between 90 K and 16 K before approaching zero as T = 0. Anomalous S(T) behavior of x = 0.6 and 0.7 samples, which are coincidentally the precursor materials to the reported superconductivity in this class of materials, indicates a dramatic change in the electronic structure of these compounds on lowering the Na content.
△ Less
Submitted 6 December, 2004;
originally announced December 2004.
-
Induction of superconductivity in Y0.4Pr0.6Ba2-xSrxCu3O7 system with increasing Sr substitution
Authors:
V. P. S. Awana,
M. A. Ansari,
Anurag Gupta,
R. B. Saxena,
H. Kishan,
Rajeev Rawat,
V. Ganesan,
A. V. Narlikar,
Devendra Buddhikot,
S. K. Malik
Abstract:
Samples of Y0.4Pr0.6Ba2-xSrxCu3O7 have been synthesized by a solid- state reaction route. The samples with x = 0.60 crystallize in an orthorhombic structure (with orthorhombic distortion decreasing with increasing x), while the samples with x=0.80 and 1.0 crystallize in a pseudo tetragonal structure. Resistance (R) measurements as a function of temperature (T) show that x = 0.0 sample is highly…
▽ More
Samples of Y0.4Pr0.6Ba2-xSrxCu3O7 have been synthesized by a solid- state reaction route. The samples with x = 0.60 crystallize in an orthorhombic structure (with orthorhombic distortion decreasing with increasing x), while the samples with x=0.80 and 1.0 crystallize in a pseudo tetragonal structure. Resistance (R) measurements as a function of temperature (T) show that x = 0.0 sample is highly semiconducting with R2K/R300K ratio of ~ 65. This ratio decreases to only ~23 and 5 for x=0.20 and x=0.4 samples, respectively. Further, the x=0.60 sample shows onset of a broad superconducting transition temperature (Tconset) at around 20 K without achieving the TcR=0 state down to 2 K. The TcR=0 state is observed in x = 0.80 and 1.00 samples at around 5 and 14 K, respectively. Thermo-electric power (S), also exhibits TcS~0 state at around 11 K and 16 K, respectively for x = 0.8 and 1.00 samples. Thermo electric power at room temperature is positive and decreases with increasing x, indicating enhanced number of mobile holes. These results demonstrate that substitution of Sr at Ba-site systematically induces metallicity and eventually superconductivity in Y0.4Pr0.6Ba2-xSrxCu3O7 system. The results are explained on the basis of reduced Pr(4f) orbital hybridization with O(2p) in supercondu cting Cu-O2 planes, resulting in delocalization of the mobile carriers. The role of decreased Pr/Ba intermixing disorder is also considered.
△ Less
Submitted 16 August, 2004;
originally announced August 2004.
-
Systematic induction of superconductivity in Y1-xCaxBa2Cu3O6.3 system
Authors:
V. P. S. Awana,
Anurag Gupta,
M. A. Ansari,
S. B. Samanta,
R. B. Saxena,
H. Kishan,
Devendra Buddhikot,
S. K. Malik,
V. Ganesan,
A. V. Narlikar
Abstract:
Compounds of series YBa2Cu3O7-d (d = 0.7), being synthesized by solid-state synthesis route with x = 0.0, 0.10, 0.15 and 0.20, crystallize in single-phase form with tetragonal structure (space group P4/mmm). The c-lattice parameter increases with increasing x, indicating successful substitution of Y3+ by bigger Ca2+ ion. Resistance versus temperature (R vs. T) measurements show that pristine sam…
▽ More
Compounds of series YBa2Cu3O7-d (d = 0.7), being synthesized by solid-state synthesis route with x = 0.0, 0.10, 0.15 and 0.20, crystallize in single-phase form with tetragonal structure (space group P4/mmm). The c-lattice parameter increases with increasing x, indicating successful substitution of Y3+ by bigger Ca2+ ion. Resistance versus temperature (R vs. T) measurements show that pristine sample (x = 0.0) is semiconducting down to 5 K. Induction of superconductivity is seen with an increase in x. The x = 0.10 sample exhibit the onset of superconducting transition (Tconset) at around 42 K without attaining zero resistance superconducting transition temperature (TcR=0) state down to 5 K. For x = 0.15 and 0.20 samples TcR=0 is observed at 25 K and 35 K with Tconset of 52 K and 61 K respectively. Thermo-electric power (S) measurements in temperature range of 5 - 300 K, exhibited TcS=0 at around 25 K and 35 K respectively for x = 0.15 and 0.20 samples. Further a sign change in S from +ve to -ve is observed at low temperatures for x = 0.0 sample.
Room temperature +ve S value decreases with increase in x, indicating enhanced number of mobile holes. The Magneto-transport measurements under applied magnet ic fields of 3 and 6 Tesla show the broadening of superconducting transition for x = 0.15, and 0.20 samples. For x = 0.10 sample the superconducting transition is suppressed in applied fields of 3 and 6 Tesla. Our results will help in constructing the complete phase diagram of Y1-xCaxBa2Cu3O7-d compounds with various x and d.
△ Less
Submitted 9 March, 2004;
originally announced March 2004.
-
Possible Competition between superconductivity and magnetism in RuSr2Gd1.5Ce0.5Cu2O10-d (Ru-1222) Rutheno-cuprate compounds
Authors:
V. P. S. Awana,
M. A. Ansari,
Anurag Gupta,
R. B. Saxena,
H. Kishan,
Devendra Buddhikot,
S. K. Malik
Abstract:
The RuSr2Gd1.5Ce0.5Cu2O10-d (Ru-1222) compounds, with varying oxygen content, crystallize in a tetragonal crystal structure (space group I4/mmm).
Resistance (R) versus temperature (T) measurements show that the air-annealed samples exhibit superconductivity with superconducting transition temperature (Tc) onset at around 32 K and R=0 at 3.5 K. On the other hand, the N2-annealed sample is semic…
▽ More
The RuSr2Gd1.5Ce0.5Cu2O10-d (Ru-1222) compounds, with varying oxygen content, crystallize in a tetragonal crystal structure (space group I4/mmm).
Resistance (R) versus temperature (T) measurements show that the air-annealed samples exhibit superconductivity with superconducting transition temperature (Tc) onset at around 32 K and R=0 at 3.5 K. On the other hand, the N2-annealed sample is semiconducting down to 2 K. Magneto-transport measurements on air-annealed sample in applied magnetic fields of 3 and 6 Tesla show a decrease in both Tc onset and TR=0. Magnetoresistance of up to 20% is observed in N2-annealed sample at 2 K and 3 T applied field. The DC magnetization data (M vs. T) reveal magnetic transitions (Tmag.) at 100 K and 106 K, respectively, for both air- and N2-annealed samples. Ferromagnetic components in the magnetization are observed for both samples at 5K and 20 K. The superconducting transition temperature (Tc) seems to compete with the magnetic transition temperature (Tmag.). Our results suggest that the magnetic ordering temperature (Tmag.) of Ru moments in RuO6 octahedra may have direct influence/connection with the appearance of superconductivity in Cu-O2 planes of Ru-1222 compounds. Key words: Ruthenocuprates, Superconductivity and Magnetism, Magneto transport and Magneto resistance. PACS: 74.25. Ha, 74.72. Jt, 75.25. +z, 75.30. Cr.
△ Less
Submitted 30 June, 2004; v1 submitted 9 March, 2004;
originally announced March 2004.