-
Solute hydrogen and deuterium observed at the near atomic scale in high-strength steel
Authors:
Andrew J. Breen,
Leigh T. Stephenson,
Binhan Sun,
Yujiao Li,
Olga Kasian,
Dierk Raabe,
Michael Herbig,
Baptiste Gault
Abstract:
Observing solute hydrogen (H) in matter is a formidable challenge, yet, enabling quantitative imaging of H at the atomic-scale is critical to understand its deleterious influence on the mechanical strength of many metallic alloys that has resulted in many catastrophic failures of engineering parts and structures. Here, we report on the APT analysis of hydrogen (H) and deuterium (D) within the nano…
▽ More
Observing solute hydrogen (H) in matter is a formidable challenge, yet, enabling quantitative imaging of H at the atomic-scale is critical to understand its deleterious influence on the mechanical strength of many metallic alloys that has resulted in many catastrophic failures of engineering parts and structures. Here, we report on the APT analysis of hydrogen (H) and deuterium (D) within the nanostructure of an ultra-high strength steel with high resistance to hydrogen embrittlement. Cold drawn, severely deformed pearlitic steel wires (Fe-0.98C-0.31Mn-0.20Si-0.20Cr-0.01Cu-0.006P-0.007S wt.%, ε=3.1) contains cementite decomposed during the pre-deformation of the alloy and ferrite. We find H and D within the decomposed cementite, and at some interfaces with the surrounding ferrite. To ascertain the origin of the H/D signal obtained in APT, we explored a series of experimental workflows including cryogenic specimen preparation and cryogenic-vacuum transfer from the preparation into a state-of-the-art atom probe. Our study points to the critical role of the preparation, i.e. the possible saturation of H-trapping sites during electrochemical polishing, how these can be alleviated by the use of an outgassing treatment, cryogenic preparation and transfer prior to charging. Accommodation of large amounts of H in the under-stoichiometric carbide likely explains the resistance of pearlite against hydrogen embrittlement.
△ Less
Submitted 3 August, 2020;
originally announced August 2020.
-
Atomic-scale investigation of hydrogen distribution in a Ti-Mo alloy
Authors:
Fengkai Yan,
Isabelle Mouton,
Leigh T. Stephenson,
Andrew J. Breen,
Yanhong Chang,
Dirk Ponge,
Dierk Raabe,
Baptiste Gault
Abstract:
Ingress of hydrogen is often linked to catastrophic failure of Ti-alloys. Here, we quantify the hydrogen distribution in fully \b{eta} and α+\b{eta} Ti-Mo alloys by using atom probe tomography. Hydrogen does not segregate at grain boundaries in the fully \b{eta} sample but segregates at some α/\b{eta} phase boundaries with a composition exceeding 20 at.% in the α+\b{eta} sample. No stable hydrides…
▽ More
Ingress of hydrogen is often linked to catastrophic failure of Ti-alloys. Here, we quantify the hydrogen distribution in fully \b{eta} and α+\b{eta} Ti-Mo alloys by using atom probe tomography. Hydrogen does not segregate at grain boundaries in the fully \b{eta} sample but segregates at some α/\b{eta} phase boundaries with a composition exceeding 20 at.% in the α+\b{eta} sample. No stable hydrides were observed in either sample. The hydrogen concentration in \b{eta} phases linearly decreases from ~13 at. % to ~4 at. % with increasing Mo-content, which is ascribed to the suppression of hydrogen uptake by Mo addition.
△ Less
Submitted 3 December, 2018;
originally announced December 2018.
-
Quantification challenges for atom probe tomography of hydrogen and deuterium in Zircaloy-4
Authors:
Isabelle Mouton,
Andrew J. Breen,
Siyang Wang,
Yanhong Chang,
Agnieszka Szczepaniak,
Paraskevas Kontis,
Leigh T. Stephenson,
Dierk Raabe,
M. Herbig,
T. Ben Britton,
Baptiste Gault
Abstract:
Analysis and understanding of the role of hydrogen in metals is a significant challenge for the future of materials science, and this is a clear objective of recent work in the atom probe tomography (APT) community. Isotopic marking by deuteration has often been proposed as the preferred route to enable quantification of hydrogen by APT. Zircaloy-4 was charged electrochemically with hydrogen and d…
▽ More
Analysis and understanding of the role of hydrogen in metals is a significant challenge for the future of materials science, and this is a clear objective of recent work in the atom probe tomography (APT) community. Isotopic marking by deuteration has often been proposed as the preferred route to enable quantification of hydrogen by APT. Zircaloy-4 was charged electrochemically with hydrogen and deuterium under the same conditions to form large hydrides and deuterides. Our results from a Zr hydride and a Zr deuteride highlight challenges associated to accurate quantification of hydrogen and deuterium, in particular associated to the overlap of peaks at low mass-to-charge ratio and of hydrogen/deuterium containing molecular ions. We discuss possible ways to ensure that appropriate information is extracted from APT analysis of hydrogen in a zirconium alloy systems that is important for nuclear power.
△ Less
Submitted 3 February, 2019; v1 submitted 10 September, 2018;
originally announced September 2018.
-
Atomic scale analysis of grain boundary deuteride growth front in Zircaloy-4
Authors:
A. J. Breen,
I. Mouton,
W. Lu,
S. Wang,
A. Szczepaniak,
P. Kontis,
L. T. Stephenson,
Y. Chang,
A. K. da Silva,
C. Liebscher,
D. Raabe,
T. B. Britton,
M. Herbig,
B. Gault
Abstract:
Zircaloy-4 (Zr-1.5%Sn-0.2%Fe-0.1%Cr wt. %) was electrochemically charged with deuterium to create deuterides and subsequently analysed with atom probe tomography and scanning transmission electron microscopy to understand zirconium hydride formation and embrittlement. At the interface between the hexagonal close packed (HCP) α-Zr matrix and a face centred cubic (FCC) δdeuteride (ZrD1.5-1.65), a HC…
▽ More
Zircaloy-4 (Zr-1.5%Sn-0.2%Fe-0.1%Cr wt. %) was electrochemically charged with deuterium to create deuterides and subsequently analysed with atom probe tomography and scanning transmission electron microscopy to understand zirconium hydride formation and embrittlement. At the interface between the hexagonal close packed (HCP) α-Zr matrix and a face centred cubic (FCC) δdeuteride (ZrD1.5-1.65), a HCP ζphase deuteride (ZrD0.25-0.5) has been observed. Furthermore, Sn is rejected from the deuterides and segregates to the deuteride/α-Zr reaction front.
△ Less
Submitted 28 June, 2018; v1 submitted 26 June, 2018;
originally announced June 2018.
-
The Laplace project: an integrated suite for correlative atom probe tomography and electron microscopy under cryogenic and UHV conditions
Authors:
Leigh T. Stephenson,
Agnieszka Szczepaniak,
Isabelle Mouton,
Kristiane Ann Kathrin Rusitzka,
Andrew J. Breen,
Uwe Tezins,
Andreas Sturm,
Dirk Vogel,
Yanhong Chang,
Paraskevas Kontis,
Alexander Rosenthal,
Jeffrey D. Shepard,
Urs Maier,
Thomas F. Kelly,
Dierk Raabe,
Baptiste Gault
Abstract:
We present sample transfer instrumentation and integrated protocols for the preparation and correlative characterization of environmentally-sensitive materials by both atom probe tomography and electron microscopy. Ultra-high vacuum cryogenic suitcases allow specimen transfer between preparation, processing and several imaging platforms without exposure to atmospheric contamination. For expedient…
▽ More
We present sample transfer instrumentation and integrated protocols for the preparation and correlative characterization of environmentally-sensitive materials by both atom probe tomography and electron microscopy. Ultra-high vacuum cryogenic suitcases allow specimen transfer between preparation, processing and several imaging platforms without exposure to atmospheric contamination. For expedient transfers, we installed a fast-docking station equipped with a cryogenic pump upon three systems; two atom probes, a scanning electron microscope / Xe-plasma focused ion beam and a N$_2$-atmosphere glovebox. We also installed a plasma FIB with a solid-state cooling stage to reduce beam damage and contamination, through reducing chemical activity and with the cryogenic components as passive cryogenic traps. We demonstrate the efficacy of the new laboratory protocols by the successful preparation and transfer of two highly contamination- and temperature-sensitive samples - water and ice. Analysing pure magnesium atom probe data, we show that surface oxidation can be effectively suppressed using an entirely cryogenic protocol (during specimen preparation and during transfer). Starting with the cryogenically-cooled plasma FIB, we also prepared and transferred frozen ice samples while avoiding significant melting or sublimation, suggesting that we may be able to measure the nanostructure of other normally-liquid or soft materials. Isolated cryogenic protocols within the N$_2$ glove box demonstrate the absence of ice condensation suggesting that environmental control can commence from fabrication until atom probe analysis.
△ Less
Submitted 28 May, 2018;
originally announced May 2018.
-
Characterizing solute hydrogen and hydrides in pure and alloyed titanium at the atomic scale
Authors:
Yanhong Chang,
Andrew J. Breen,
Zahra Tarzimoghadam,
Philipp Kürnsteiner,
Hazel Gardner,
Abigail Ackerman,
Anna Radecka,
Paul A. J. Bagot,
Wenjun Lu,
Tong Li,
Eric A. Jägle,
Michael Herbig,
Leigh T. Stephenson,
Michael P. Moody,
David Rugg,
David Dye,
Dirk Ponge,
Dierk Raabe,
Baptiste Gault
Abstract:
Ti has a high affinity for hydrogen and is a typical hydride formers. Ti-hydride are brittle phases which probably cause premature failure of Ti-alloys. Here, we used atom probe tomography and electron microscopy to investigate the hydrogen distribution in a set of specimens of commercially pure Ti, model and commercial Ti-alloys. Although likely partly introduced during specimen preparation with…
▽ More
Ti has a high affinity for hydrogen and is a typical hydride formers. Ti-hydride are brittle phases which probably cause premature failure of Ti-alloys. Here, we used atom probe tomography and electron microscopy to investigate the hydrogen distribution in a set of specimens of commercially pure Ti, model and commercial Ti-alloys. Although likely partly introduced during specimen preparation with the focused-ion beam, we show formation of Ti-hydrides along α grain boundaries and α/\b{eta} phase boundaries in commercial pure Ti and α+\b{eta} binary model alloys. No hydrides are observed in the α phase in alloys with Al addition or quenched-in Mo supersaturation.
△ Less
Submitted 11 March, 2018;
originally announced March 2018.
-
A nexus between 3D atomistic data hybrids derived from atom probe microscopy and computational materials science: a new analysis of solute clustering in Al-alloys
Authors:
Baptiste Gault,
Xiang Yuan Cui,
Michael P. Moody,
Anna V. Ceguerra,
Andrew J. Breen,
Ross K. W. Marceau,
Simon P. Ringer
Abstract:
Solute clusters affect the physical properties of alloys. Knowledge of the atomic structure of solute clusters is a prerequisite for material optimisation. In this study, solute clusters in a rapid-hardening Al-Cu-Mg alloy were characterised by a combination of atom probe tomography and density functional theory, making use of a hybrid data type that combines lattice rectification and data complet…
▽ More
Solute clusters affect the physical properties of alloys. Knowledge of the atomic structure of solute clusters is a prerequisite for material optimisation. In this study, solute clusters in a rapid-hardening Al-Cu-Mg alloy were characterised by a combination of atom probe tomography and density functional theory, making use of a hybrid data type that combines lattice rectification and data completion to directly input experimental data into atomistic simulations. The clusters input to the atomistic simulations are thus observed experimentally, reducing the number of possible configurations. Our results show that spheroidal, compact clusters are more energetically favourable and more abundant.
△ Less
Submitted 9 January, 2017;
originally announced January 2017.
