Showing 1–50 of 88 results for author: Boukhvalov, D W

Structural, electronic, and optical properties of 6H-SiC layers synthesized by implantation of carbon ions into silicon

Authors: D. W. Boukhvalov, D. A. Zatsepin, D. Yu. Biryukov, Yu. V. Shchapova, N. V. Gavrilov, A. F. Zatsepin

Abstract: Systematic studies of the gradual fabrication by means of carbon ion-implantation of high-quality 6H-SiC layers on silicon surfaces have been carried out. The fluence of carbon ions varied from 5*10^15 cm-2 to 10^17 cm-2. Results of first-principle calculations, X-ray diffraction (XRD), and Raman spectroscopy demonstrate the amorphization of silicon substrate without any tendency to the segregatio… ▽ More Systematic studies of the gradual fabrication by means of carbon ion-implantation of high-quality 6H-SiC layers on silicon surfaces have been carried out. The fluence of carbon ions varied from 5*10^15 cm-2 to 10^17 cm-2. Results of first-principle calculations, X-ray diffraction (XRD), and Raman spectroscopy demonstrate the amorphization of silicon substrate without any tendency to the segregation of carbon in the samples synthesized at low fluencies. The formation of a SiO2-like structure at this stage was also detected. X-ray photoelectron spectroscopy (XPS), XRD, and Raman spectroscopy demonstrate that an increase in carbon content at 10^17 cm-2 fluence leads to the growth of 6H-SiC films on the surface of the amorphous silicon substrate. Atomic force microscopy (AFM) data obtained also demonstrates the decreasing of surface roughens after the formation of SiC film. XPS and Raman spectra suggest that excessive carbon content leaves the SiC matrix via the formation of an insignificant amount of partially oxidized carbon nanostructures. Optical measurements also support the claim of high-quality 6H-SiC film formation in the samples synthesized at 10^17 cm-2 fluence and demonstrate the absence of any detectable contribution of nanostructures formed from excessive carbon on the optical properties of the material under study. △ Less

Submitted 28 May, 2024; originally announced May 2024.

Comments: Accepted to the Appl. Surf. Sci. journal

Formation of yttrium oxalate phase filled by carbon clusters on the surface of yttrium oxide films

Authors: D. W. Boukhvalov, D. A. Zatsepin, D. Yu. Biryukov, Yu. V. Shchapova, N. V. Gavrilov, A. F. Zatsepin

Abstract: In the current paper, we report the results of surface modification of cubic Y2O3 films employing carbon-ion implantation. The characterization results demonstrate the formation of a stable yttrium oxalate-based structure with cavities filled with carbon clusters. Theoretical simulations demonstrate that the incorporation of eighteen-atom carbon clusters into the cavities of Y2(C2O4)3 does not lea… ▽ More In the current paper, we report the results of surface modification of cubic Y2O3 films employing carbon-ion implantation. The characterization results demonstrate the formation of a stable yttrium oxalate-based structure with cavities filled with carbon clusters. Theoretical simulations demonstrate that the incorporation of eighteen-atom carbon clusters into the cavities of Y2(C2O4)3 does not lead to valuable changes in the crystal structure of yttrium oxalate. X-ray diffraction and optical measurements demonstrate that the subsurface bulk area of cubic yttrium oxide remains unperturbed. The oxalate "skin" thickness with embedded carbon clusters is estimated to be approximately 10 nm. The prospective employing the method to manage optical properties and increase the biocompatibility of yttria and lanthanide oxides are discussed. △ Less

Submitted 16 January, 2024; originally announced January 2024.

Comments: 20 pages, 5 figures, accepted to the Materials Chemistry and Physics journal

Uncommon 2D Diamond-like Carbon Nanodots Derived from Nanotubes: Atomic Structure, Electronic States and Photonic Properties

Authors: D. W. Boukhvalov, D. A. Zatsepin, Yu. A. Kuznetsova, V. I. Pryakhina, A. F. Zatsepin

Abstract: In this article, we report the results of relatively facile fabrication of carbon nanodots from single-walled and multi-walled carbon nanotubes (SWCNT and MWCNT). The results of X-ray photoelectron spectroscopy (XPS) and Raman measurements show that the obtained carbon nanodots are quasi-two-dimensional objects with a diamond-like structure. Based on the characterization results, a theoretical mod… ▽ More In this article, we report the results of relatively facile fabrication of carbon nanodots from single-walled and multi-walled carbon nanotubes (SWCNT and MWCNT). The results of X-ray photoelectron spectroscopy (XPS) and Raman measurements show that the obtained carbon nanodots are quasi-two-dimensional objects with a diamond-like structure. Based on the characterization results, a theoretical model of synthesized carbon nanodots was developed. The measured absorption spectra demonstrate the similarity of the local atomic structure of carbon nanodots synthesized from single-walled and multi-walled carbon nanotubes. However, the photoluminescence (PL) spectra of nanodots synthesized from both sources turned out to be completely different. Carbon dots fabricated from MWCNTs exhibit PL spectra similar to nanoscale carbon systems with sp3 hybridization and a valuable edge contribution. At the same time nanodots synthesized from SWCNTs exhibit PL spectra which are typical for quantum dots with an estimated size of ~0.6-1.3 nm. △ Less

Submitted 30 May, 2023; originally announced May 2023.

Comments: 22 pages, 9 figures, to appear in PCCP

On the Nature of Interlayer Bonds in Two-dimensional Materials

Authors: Georgy V. Pushkarev, Vladimir G. Mazurenko, Vladimir V. Mazurenko, Danil W. Boukhvalov

Abstract: The role of interlayer bonds in the two-dimensional (2D) materials "beyond graphene" and so-called van der Waals heterostructures is vital, and understanding the nature of these bonds in terms of strength and type is essential due to a wide range of their prospective technological applications. However, this issue has not yet been properly addressed in the previous investigations devoted to 2D mat… ▽ More The role of interlayer bonds in the two-dimensional (2D) materials "beyond graphene" and so-called van der Waals heterostructures is vital, and understanding the nature of these bonds in terms of strength and type is essential due to a wide range of their prospective technological applications. However, this issue has not yet been properly addressed in the previous investigations devoted to 2D materials. In our work, by using first-principles calculations we perform a systematic study of the interlayer bonds and charge redistribution of several representative 2D materials that are traditionally referred as van der Waals systems. Our results demonstrate that one can distinguish three main types of inter-layer couplings in the considered 2D structures: one atom thick membranes bonded by London dispersion forces (graphene, hBN), systems with leading electrostatic interaction between layers (diselenides, InSe and bilayer silica) and materials with so-called dative or coordination chemical bonds between layers (ditelurides). We also propose a protocol for recognising the leading type of interlayer bonds in a system that includes comparison of interlayer distances, binding energies and redistribution of the charge densities in interlayer space. Such an approach is computationally cheap and can be used to further prediction of chemical and physical properties such as charge density waves (CDW), work function and chemical stability at ambient conditions. △ Less

Submitted 7 April, 2023; originally announced April 2023.

Comments: 35 pages, 6 figures, 3 tables

Journal ref: J. Phys. Chem. C 2023

Comparative Analysis of the Electronic Energy Structure of Nanocrystalline Polymorphs of Y2O3 Thin Layers: Theory and Experiments

Authors: D. W. Boukhvalov, D. A. Zatsepin, Yu. A. Kuznetsova, N. V. Gavrilov, A. F. Zatsepin

Abstract: The results of fabrication and characterization of atomic structure of nanocrystalline thin layers of Y2O3 in cubic and monoclinic phases is reported. Experimental data demonstrate crystalline ordering in nanocrystalline films with average grain size of ~10-14 nm both for cubic and monoclinic studied structures. Density Functional Theory (DFT) based simulations demonstrate insignificant difference… ▽ More The results of fabrication and characterization of atomic structure of nanocrystalline thin layers of Y2O3 in cubic and monoclinic phases is reported. Experimental data demonstrate crystalline ordering in nanocrystalline films with average grain size of ~10-14 nm both for cubic and monoclinic studied structures. Density Functional Theory (DFT) based simulations demonstrate insignificant differences of electronic structure of these phases in the bulk and on the surfaces. Theoretical modeling also pointed out the significant broadening of valence and conductive bands caused by means of energy levels splitting in agreement with experimental data (X-ray photoelectron and photoluminescence spectra). The presence of various intrinsic and extrinsic defects (including surface adsorption of carbon mono- and dioxide) does not promote visible changes in electronic structure of Y2O3 surface for both studied phases. Optical absorption and luminescence measurements indicate insignificant bandgap reduction of Y2O3 nanocrystalline layers and the very little contribution from defect states. Simulation of extrinsic compression and expanding demonstrate stability of the electronic structure of nanocrystalline Y2O3 even under significant strain. Results of comprehensive studies demonstrate that yttrium oxide based nanocrystalline layers are prospective for various optical applications as a stable material. △ Less

Submitted 29 November, 2022; originally announced November 2022.

Comments: 24 pages, 13 figures, accepted to Applied Surface Science

A Comprehensive Model of Nitrogen-Free Ordered Carbon Quantum Dots

Authors: D. W. Boukhvalov, V. Yu. Osipov, B. T. Hogan, A. Baldycheva

Abstract: We propose and demonstrate a novel range of models to accurately determine the optical properties of nitrogen-free carbon quantum dots (CQDs) with ordered graphene layered structures. We confirm the results of our models against the full range of experimental results for CQDs available from an extensive review of the literature. The models can be equally applied to CQDs with varied sizes and with… ▽ More We propose and demonstrate a novel range of models to accurately determine the optical properties of nitrogen-free carbon quantum dots (CQDs) with ordered graphene layered structures. We confirm the results of our models against the full range of experimental results for CQDs available from an extensive review of the literature. The models can be equally applied to CQDs with varied sizes and with different oxygen content in the basal planes of the constituent graphenic sheets. We demonstrate that the experimentally observed blue fluorescent emission of nitrogen-free CQDs can be associated with either small oxidised areas on the periphery of the graphenic sheets, or with sub-nanometre non-functionalised islands of sp2-hybridised carbon with high symmetry confined in the centres of oxidised graphene sheets. Larger and/or less symmetric non-functionalised regions in the centre of functionalised graphene sheet are found to be sources of green and even red fluorescent emission from nitrogen-free CQDs. We also demonstrate an approach to simplify the modelling of the discussed sp2-islands by substitution with equivalent strained polycyclic aromatic hydrocarbons. Additionally, we show that the bandgaps (and photoluminescence) of CQDs are not dependent on either out-of-plane corrugation of the graphene sheet or the spacing between sp2-islands. Advantageously, our proposed models show that there is no need to involve light-emitting polycyclic aromatic molecules (nanographenes) with arbitrary structures grafted to the particle periphery to explain the plethora of optical phenomena observed for CQDs across the full range of experimental works. △ Less

Submitted 28 November, 2022; originally announced November 2022.

Comments: 32 pages, 6 figures, accepted to Nanoscale Research Letters

On the Atomic Structure of Two-Dimensional Materials with Janus Structures

Authors: Danil W. Boukhvalov

Abstract: The discrepancy between the bright theoretical projections for two-dimensional (2D) Janus structures and the lack of experimental realisation of these structures motivated us to study the effect of structural disorder on the stability of MoSSe, SnSSe, PtSSe, In2SSe and GaInSe2. The calculation results demonstrate that the difference between metal-sulfur and metal-selenium bonds makes Janus structu… ▽ More The discrepancy between the bright theoretical projections for two-dimensional (2D) Janus structures and the lack of experimental realisation of these structures motivated us to study the effect of structural disorder on the stability of MoSSe, SnSSe, PtSSe, In2SSe and GaInSe2. The calculation results demonstrate that the difference between metal-sulfur and metal-selenium bonds makes Janus structures frustrated and less energetically favourable than less ordered allotropes of the same compounds. This result explains the difficulties encountered in experimental fabrication of these materials. In the bulk, there is an additional contribution to the total energy from dipole-dipole interactions between layers with a Janus structure that can overcome the energetic cost of structural frustration in layers for compounds with sufficiently large dipole moments. However, the entropic contribution to the free energy decreases the favourability of the ordered Janus structure. The calculation results are used to make recommendations to enable the discovery and synthesis of 2D materials with Janus structures. △ Less

Submitted 5 March, 2022; originally announced March 2022.

Comments: 11 pages, 3 figures, 3 tables, to appear in PCCP as Communication

Uncommon clustering in dilute Ti-Fe alloys

Authors: D. W. Boukhvalov, Yu. N. Gornostyrev, M. I. Katsnelson

Abstract: We present the results of ab initio modeling of structure of dilute Ti-Fe, a typical representative of quenched Ti-based transition-metal alloys. We have demonstrated that beyond the solubility limit this alloy cannot be described in common terms of substitutional and interstitial alloys. Instead, very stable local clusters are formed in both low-temperature hcp and high-temperature bcc phases of… ▽ More We present the results of ab initio modeling of structure of dilute Ti-Fe, a typical representative of quenched Ti-based transition-metal alloys. We have demonstrated that beyond the solubility limit this alloy cannot be described in common terms of substitutional and interstitial alloys. Instead, very stable local clusters are formed in both low-temperature hcp and high-temperature bcc phases of alloys, with almost identical local structures. This gives an example of geometrically frustrated state and explains unusual concentration behavior of Mössbauer spectra discovered long ago for this system. △ Less

Submitted 9 March, 2020; originally announced March 2020.

Comments: 11 pages 5 figures accepted in J. Phys.: Materials

Chemical instability of free-standing boron monolayers and properties of oxidized borophene sheets

Authors: Xue Lei, Anatoly F. Zatsepin, Danil W. Boukhvalov

Abstract: In this work we report results of step-by-step modeling of the oxidation of free-standing boron monolayers of different types. Results of the calculations demonstrate that the process of the oxidation is always exothermic and lead toward the formation of foam-like boron oxide films with incorporated non-oxidized small boron clusters. Some of these boron-oxide films demonstrate the presence of chem… ▽ More In this work we report results of step-by-step modeling of the oxidation of free-standing boron monolayers of different types. Results of the calculations demonstrate that the process of the oxidation is always exothermic and lead toward the formation of foam-like boron oxide films with incorporated non-oxidized small boron clusters. Some of these boron-oxide films demonstrate the presence of chemically stable magnetic centers. Evaluation of the physical properties of oxidized boprophene sheets (OBS) demonstrate it possible application in solar energy, as sensors and coating against leakage of hydrogen. △ Less

Submitted 9 March, 2020; originally announced March 2020.

Comments: 14 pages, 5 figures, accepted in Physica E journal

Structural phase transitions in VSe2: energetics, electronic structure and magnetism

Authors: Georgy V. Pushkarev, Vladimir G. Mazurenko, Vladimir V. Mazurenko, Danil W. Boukhvalov

Abstract: First principles calculations of magnetic and electronic properties of VSe2 describing the transition between two structural phases(H,T) were performed. Results of the calculations evidence rather low energy barrier ( 0.60 eV for monolayer) for transition betweenthe phases. The energy required for the deviation of Se atom or whole layer of selenium atoms on a small angle up to 10 degrees from init… ▽ More First principles calculations of magnetic and electronic properties of VSe2 describing the transition between two structural phases(H,T) were performed. Results of the calculations evidence rather low energy barrier ( 0.60 eV for monolayer) for transition betweenthe phases. The energy required for the deviation of Se atom or whole layer of selenium atoms on a small angle up to 10 degrees from initial positions is also rather low, 0.32 and 0.19 eV/Se, respectively. The changes in band structure of VSe2 caused by these motions of Se atoms should be taken into account for analysis of the experimental data. Simulations of the strain effects suggest that the experimentally observed T phase of VSe2 monolayer is the ground state due a substrate-induced strain. Calculations of the difference in total energies of ferromagnetic and antiferromagnetic configurations evidence that the ferromagnetic configuration is the ground state of the system for all stable and intermediate atomic structures. Calculated phonon dispersions suggest visible influence of magnetic configurations on vibrational properties. △ Less

Submitted 18 October, 2019; v1 submitted 24 September, 2019; originally announced September 2019.

MSC Class: 22647; 22653

Journal ref: Physical Chemistry Chemical Physics, 2019

Fundamental Crystal Field Excitations in Magnetic Semiconductor SnO$_2$:Mn,Fe,Co,Ni

Authors: B. Leedahl, D. J. McCloskey, D. W. Boukhvalov, I. S. Zhidkov, A. I. Kukharenko, E. Z. Kurmaev, S. O. Cholakh, N. V. Gavrilov, V. I. Brinzari, A. Moewes

Abstract: Directly measuring elementary electronic excitations in dopant $3d$ metals is essential to understanding how they function as part of their host material. Through calculated crystal field splittings of the $3d$ electron band it is shown how transition metals Mn, Fe, Co, and Ni are incorporated into SnO$_2$. The crystal field splittings are compared to resonant inelastic x-ray scattering (RIXS) exp… ▽ More Directly measuring elementary electronic excitations in dopant $3d$ metals is essential to understanding how they function as part of their host material. Through calculated crystal field splittings of the $3d$ electron band it is shown how transition metals Mn, Fe, Co, and Ni are incorporated into SnO$_2$. The crystal field splittings are compared to resonant inelastic x-ray scattering (RIXS) experiments, which measure precisely these elementary $dd$ excitations. The origin of spectral features can be determined and identified via this comparison, leading to an increased understanding of how such dopant metals situate themselves in, and modify the host's electronic and magnetic properties; and also how each element differs when incorporated into other semiconducting materials. We found that oxygen vacancy formation must not occur at nearest neighbour sites to metal atoms, but instead must reside at least two coordination spheres beyond. The coordination of the dopants within the host can then be explicitly related to the $d$-electron configurations and energies. This approach facilitates an understanding of the essential link between local crystal coordination and electronic/magnetic properties. △ Less

Submitted 7 August, 2019; originally announced August 2019.

Journal ref: Phys. Chem. Chem. Phys., 2019,21, 11992-11998

Liquid-phase exfoliated indium-selenide flakes and their application in hydrogen evolution reaction

Authors: Elisa Petroni, Emanuele Lago, Sebastiano Bellani, Danil W. Boukhvalov, Antonio Politano, Bekir Gurbulak, Songul Duman, Mirko Prato, Silvia Gentiluomo, Reinier Oropesa-Nunez, Jaya-Kumar Panda, Peter S. Toth, Antonio Esau Del Rio Castillo, Vittorio Pellegrini, Francesco Bonaccorso

Abstract: Single- and few-layered InSe flakes are produced by the liquid-phase exfoliation of beta-InSe single crystals in 2-propanol, obtaining stable dispersions with a concentration as high as 0.11 g/L. Ultracentrifugation is used to tune the morphology, i.e., the lateral size and thickness of the as-produced InSe flakes. We demonstrate that the obtained InSe flakes have maximum lateral sizes ranging fro… ▽ More Single- and few-layered InSe flakes are produced by the liquid-phase exfoliation of beta-InSe single crystals in 2-propanol, obtaining stable dispersions with a concentration as high as 0.11 g/L. Ultracentrifugation is used to tune the morphology, i.e., the lateral size and thickness of the as-produced InSe flakes. We demonstrate that the obtained InSe flakes have maximum lateral sizes ranging from 30 nm to a few um, and thicknesses ranging from 1 to 20 nm, with a max population centred at ~ 5 nm, corresponding to 4 Se-In-In-Se quaternary layers. We also show that no formation of further InSe-based compounds (such as In2Se3) or oxides occurs during the exfoliation process. The potential of these exfoliated-InSe few-layer flakes as a catalyst for hydrogen evolution reaction (HER) is tested in hybrid single-walled carbon nanotubes/InSe heterostructures. We highlight the dependence of the InSe flakes morphologies, i.e., surface area and thickness, on the HER performances achieving best efficiencies with small flakes offering predominant edge effects. Our theoretical model unveils the origin of the catalytic efficiency of InSe flakes, and correlates the catalytic activity to the Se vacancies at the edge of the flakes. △ Less

Submitted 21 March, 2019; originally announced March 2019.

Comments: 39 pages

Journal ref: Small, Volume 14, Issue 26, June 27, 2018 1800749

Atomic and electronic structure of graphene oxide/Cu interface

Authors: Danil W. Boukhvalov, Ernst Z. Kurmaev, Ewelina Urbańczyk, Grzegorz Dercz, Agnieszka Stolarczyk, Wojciech Simka, Andrey I. Kukharenko, Ivan S. Zhidkov, Anatoly I. Slesarev, Anatoly F. Zatsepin, Seif O. Cholakh

Abstract: The results of X-ray photoemission (XPS) and valence bands spectroscopy, optically stimulated electron emission (OSEE) measurements and density functional theory based modeling of graphene oxide (GO) placed on Cu via an electrophoretic deposition (EPD) are reported. The comparison of XPS spectra of EPD prepared GO/Cu composites with those of as prepared GO, strongly reduced GO, pure and oxidized c… ▽ More The results of X-ray photoemission (XPS) and valence bands spectroscopy, optically stimulated electron emission (OSEE) measurements and density functional theory based modeling of graphene oxide (GO) placed on Cu via an electrophoretic deposition (EPD) are reported. The comparison of XPS spectra of EPD prepared GO/Cu composites with those of as prepared GO, strongly reduced GO, pure and oxidized copper demonstrate the partial (until C/O ratio about two) removal of oxygen-containing functional groups from GO simultaneously with the formation of copper oxide-like layers over the metallic substrate. OSEE measurements evidence the presence of copper oxide phase in the systems simultaneously with the absence of contributions from GO with corresponding energy gap. All measurements demonstrate the similarity of the results for different thickness of GO cover of the copper surface. Theoretical modeling demonstrates favorability of migration of oxygen-containing functional groups from GO to the copper substrate only for the case of C/O ratio below two and formation of Cu-O-C bonds between substrate and GO simultaneously with the vanishing of the energy gap in GO layer. Basing on results of experimental measurements and theoretical calculations we suggest the model of atomic structure for Cu/GO interface as Cu/CuO/GO with C/O ratio in gapless GO about two. △ Less

Submitted 3 September, 2018; originally announced September 2018.

Comments: 22 pages, 14 figures, accepted to Thin Solid Films journal

The role of surface chemical reactivity in the stability of electronic nanodevices based on two-dimensional materials "beyond graphene" and topological insulators

Authors: A. Politano, M. S. Vitiello, L. Viti, D. W. Boukhvalov, G. Chiarello

Abstract: Here, we examine the influence of surface chemical reactivity toward ambient gases on the performance of nanodevices based on two-dimensional materials "beyond graphene" and novel topological phases of matter. While surface oxidation in ambient conditions was observed for silicene and phosphorene with subsequent reduction of the mobility of charge carriers, nanodevices with active channels of indi… ▽ More Here, we examine the influence of surface chemical reactivity toward ambient gases on the performance of nanodevices based on two-dimensional materials "beyond graphene" and novel topological phases of matter. While surface oxidation in ambient conditions was observed for silicene and phosphorene with subsequent reduction of the mobility of charge carriers, nanodevices with active channels of indium selenide, bismuth chalcogenides and transition-metal dichalcogenides are stable in air. However, air-exposed indium selenide suffers of p-type doping due to water decomposition on Se vacancies, whereas the low mobility of charge carriers in transition-metal dichalcogenides increases the response time of nanodevices. Conversely, bismuth chalcogenides require a control of crystalline quality, which could represent a serious hurdle for up scaling. △ Less

Submitted 2 May, 2018; originally announced May 2018.

Journal ref: FlatChem 1 (2017) 60-64

Unusually strong lateral interaction in the CO overlayer in phosphorene-based systems

Authors: Antonio Politano, Miriam Serena Vitiello, Leonardo Viti, Jin Hu, Zhiqiang Mao, Jiang Wei, Gennaro Chiarello, Danil W. Boukhvalov

Abstract: By means of vibrational spectroscopy and density functional theory (DFT), we investigate CO adsorption on phosphorene-based systems. We find stable CO adsorption at room temperature on both phosphorene and bulk black phosphorus. The adsorption energy and vibrational spectrum have been calculated for several possible configurations of the CO overlayer. We find that the vibrational spectrum is chara… ▽ More By means of vibrational spectroscopy and density functional theory (DFT), we investigate CO adsorption on phosphorene-based systems. We find stable CO adsorption at room temperature on both phosphorene and bulk black phosphorus. The adsorption energy and vibrational spectrum have been calculated for several possible configurations of the CO overlayer. We find that the vibrational spectrum is characterized by two different C-O stretching energies. The experimental data are in good agreement with the prediction of the DFT model and unveil the unusual C-O vibrational band at 165-180 meV, activated by the lateral interactions in the CO overlayer. △ Less

Submitted 27 April, 2018; originally announced April 2018.

Journal ref: Nano Res. 2016, 9(9): 2598-2605

Stability of boron-doped graphene/copper interface: DFT, XPS and OSEE studies

Authors: D. W. Boukhvalov, I. S. Zhidkov, A. I. Kukharenko, A. I. Slesarev, A. F. Zatsepin, S. O. Cholakh, E. Z. Kurmaev

Abstract: Two different types of boron-doped graphene/copper interfaces synthesized using two different flow rates of Ar through the bubbler containing the boron source were studied. X-ray photoelectron spectra (XPS) and optically stimulated electron emission (OSEE) measurements have demonstrated that boron-doped graphene coating provides a high corrosion resistivity of Cu-substrate with the light traces of… ▽ More Two different types of boron-doped graphene/copper interfaces synthesized using two different flow rates of Ar through the bubbler containing the boron source were studied. X-ray photoelectron spectra (XPS) and optically stimulated electron emission (OSEE) measurements have demonstrated that boron-doped graphene coating provides a high corrosion resistivity of Cu-substrate with the light traces of the oxidation of carbon cover. The density functional theory calculations suggest that for the case of substitutional (graphitic) boron-defect only the oxidation near boron impurity is energetically favorable and creation of the vacancies that can induce the oxidation of copper substrate is energetically unfavorable. In the case of non-graphitic boron defects oxidation of the area, a nearby impurity is metastable that not only prevent oxidation but makes boron-doped graphene. Modeling of oxygen reduction reaction demonstrates high catalytic performance of these materials. △ Less

Submitted 7 February, 2018; originally announced February 2018.

Comments: 15 pages, 8 figures, to appear in Appl. Surf. Sci

Band alignments of electronic energy structure in epitaxially grown \b{eta}-Ga2O3 layers

Authors: D. A. Zatsepin, D. W. Boukhvalov, A. F. Zatsepin, Yu. A. Kuznetsova, D. Gogova, V. Ya. Shur, A. A. Esin

Abstract: Gallium oxide epitaxial layers grown on native substrates and basal plane sapphire were characherized by X-ray phtotelectron and optical reflectance spectroscopies. The XPS electronic structure mapping was coupled to Density functional theory calculations. Gallium oxide epitaxial layers grown on native substrates and basal plane sapphire were characherized by X-ray phtotelectron and optical reflectance spectroscopies. The XPS electronic structure mapping was coupled to Density functional theory calculations. △ Less

Submitted 29 January, 2018; originally announced January 2018.

Electronic structure, charge transfer, and intrinsic luminescence of gadolinium oxide nanoparticles: Experiment and theory

Authors: D. A. Zatsepin, D. W. Boukhvalov, A. F. Zatsepin, Yu. A. Kuznetsova, M. A. Mashkovtsev, V. N. Rychkov, V. Ya. Shur, A. A. Esin, E. Z. Kurmaev

Abstract: The cubic (c) and monoclinic (m) polymorphs of Gd2O3 were studied using the combined analysis of several materials science techniques - X-ray diffraction (XRD), scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS), and photoluminescence (PL) spectroscopy. Density functional theory (DFT) based calculations for the samples under study were performed as well. The cubic phase of… ▽ More The cubic (c) and monoclinic (m) polymorphs of Gd2O3 were studied using the combined analysis of several materials science techniques - X-ray diffraction (XRD), scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS), and photoluminescence (PL) spectroscopy. Density functional theory (DFT) based calculations for the samples under study were performed as well. The cubic phase of gadolinium oxide (c-Gd2O3) synthesized using a precipitation method exhibits spheroidal-like nanoclusters with well-defined edges assembled from primary nanoparticles with an average size of 50 nm, whereas the monoclinic phase of gadolinium oxide (m-Gd2O3) deposited using explosive pyrolysis has a denser structure compared with natural gadolinia. This phase also has a structure composed of three-dimensional complex agglomerates without clear-edged boundaries that are ~21 nm in size plus a cubic phase admixture of only 2 at. % composed of primary edge-boundary nanoparticles ~15 nm in size. These atomic features appear in the electronic structure as different defects ([Gd...O-OH] and [Gd...O-O]) and have dissimilar contributions to the charge-transfer processes among the appropriate electronic states with ambiguous contributions in the Gd 5p - O 2s core-like levels in the valence band structures. The origin of [Gd...O-OH] defects found by XPS was well-supported by PL analysis. The electronic and atomic structures of the synthesized gadolinias calculated using DFT were compared and discussed on the basis of the well-known joint OKT-van der Laan model, and good agreement was established. △ Less

Submitted 11 December, 2017; originally announced December 2017.

Comments: 27 pages, 10 figures, accepted in Appl. Surf. Sci

Atomic and electronic structures of stable linear carbon chains on Ag-nanoparticles

Authors: D. W. Boukhvalov, I. S. Zhidkov, E. Z. Kurmaev, E. Fazio, S. O. Cholakh, L. D'Urso

Abstract: In this work, we report X-ray photoelectron (XPS) and valence band (VB) spectroscopy measurements of surfactant-free silver nanoparticles and silver/linear carbon chains (Ag@LCC) structures prepared by pulse laser ablation (PLA) in water. Our measurements demonstrate significant oxidation only on the surfaces of the silver nanoparticles with many covalent carbon-silver bonds but only negligible tr… ▽ More In this work, we report X-ray photoelectron (XPS) and valence band (VB) spectroscopy measurements of surfactant-free silver nanoparticles and silver/linear carbon chains (Ag@LCC) structures prepared by pulse laser ablation (PLA) in water. Our measurements demonstrate significant oxidation only on the surfaces of the silver nanoparticles with many covalent carbon-silver bonds but only negligible traces of carbon-oxygen bonds. Theoretical modeling also provides evidence of the formation of robust carbon-silver bonds between linear carbon chains and pure and partially oxidized silver surfaces. A comparison of theoretical and experimental electronic structures also provides evidence of the presence of non-oxidized linear carbon chains on silver surfaces. To evaluate the chemical stability, we investigated the energetics of the physical adsorption of oxidative species (water and oxygen) and found that this adsorption is much preferrable on oxidized or pristine silver surfaces than the adsorption of linear carbon chains, which makes the initial step in the oxidation of LCC energetically unfavorable. △ Less

Submitted 19 November, 2017; originally announced November 2017.

Comments: Accepted to the Carbon journal

The MRO-accompanied modes of Re-implantation into SiO2-host matrix: XPS and DFT based scenarios

Authors: A. F. Zatsepin, D. A. Zatsepin, D. W. Boukhvalov, N. V. Gavrilov, V. Ya. Shur, A. A. Esin

Abstract: The following scenarios of Re-embedding into SiO2-host by pulsed Re-implantation were derived and discussed after XPS-and-DFT electronic structure qualification: (i) low Re-impurity concentration mode -> the formation of combined substitutional and interstitial impurities with Re2O7-like atomic and electronic structures in the vicinity of oxygen vacancies; (ii) high Re-impurity concentration mode… ▽ More The following scenarios of Re-embedding into SiO2-host by pulsed Re-implantation were derived and discussed after XPS-and-DFT electronic structure qualification: (i) low Re-impurity concentration mode -> the formation of combined substitutional and interstitial impurities with Re2O7-like atomic and electronic structures in the vicinity of oxygen vacancies; (ii) high Re-impurity concentration mode -> the fabrication of interstitial Re-metal clusters with the accompanied formation of ReO2-like atomic structures and (iii) an intermediate transient mode with Re-impurity concentration increase, when the precursors of interstitial defect clusters are appeared and growing in the host-matrix structure occur. An amplification regime of Re-metal contribution majority to the final Valence Band structure was found as one of the sequences of intermediate transient mode. It was shown that most of the qualified and discussed modes were accompanied by the MRO (middle range ordering) distortions in the initial oxygen subnetwork of the a-SiO2 host-matrix because of the appeared mixed defect configurations. △ Less

Submitted 6 September, 2017; originally announced September 2017.

Comments: 19 pages, 7 figures, accepted to J. Alloys and Compounds

Atomic and electronic structure of a copper/graphene interface as prepared and 1.5 years after

Authors: D. W. Boukhvalov, P. F. Bazylewski, A. I. Kukharenko, I. S. Zhidkov, Yu. S. Ponosov, E. Z. Kurmaev, S. O. Cholakh, Y. H. Lee, G. S. Chang

Abstract: We report the results of X-ray spectroscopy and Raman measurements of as-prepared graphene on a high quality copper surface and the same materials after 1.5 years under different conditions (ambient and low humidity). The obtained results were compared with density functional theory calculations of the formation energies and electronic structures of various structural defects in graphene/Cu interf… ▽ More We report the results of X-ray spectroscopy and Raman measurements of as-prepared graphene on a high quality copper surface and the same materials after 1.5 years under different conditions (ambient and low humidity). The obtained results were compared with density functional theory calculations of the formation energies and electronic structures of various structural defects in graphene/Cu interfaces. For evaluation of the stability of the carbon cover, we propose a two-step model. The first step is oxidation of the graphene, and the second is perforation of graphene with the removal of carbon atoms as part of the carbon dioxide molecule. Results of the modeling and experimental measurements provide evidence that graphene grown on high-quality copper substrate becomes robust and stable in time (1.5 years). However, the stability of this interface depends on the quality of the graphene and the number of native defects in the graphene and substrate. The effect of the presence of a metallic substrate with defects on the stability and electronic structure of graphene is also discussed. △ Less

Submitted 30 July, 2017; originally announced July 2017.

Comments: 18 pages, 6 figures, accepted to Appl. Surf. Sci

Enhanced clustering tendency of Cu-impurities with a number of oxygen vacancies in heavy carbon-loaded TiO2 - the bulk and surface morphologies

Authors: D. A. Zatsepin, D. W. Boukhvalov, E. Z. Kurmaev, A. F. Zatsepin, S. S. Kim, N. V. Gavrilov, I. S. Zhidkov

Abstract: The over threshold carbon-loadings (~50 at.%) of initial TiO2-hosts and posterior Cu-sensitization (~7 at.%) was made using pulsed ion-implantation technique in sequential mode with 1 hour vacuum-idle cycle between sequential stages of embedding. The final Cx-TiO2:Cu samples were qualified using XPS wide-scan elemental analysis, core-levels and valence band mappings. The results obtained were disc… ▽ More The over threshold carbon-loadings (~50 at.%) of initial TiO2-hosts and posterior Cu-sensitization (~7 at.%) was made using pulsed ion-implantation technique in sequential mode with 1 hour vacuum-idle cycle between sequential stages of embedding. The final Cx-TiO2:Cu samples were qualified using XPS wide-scan elemental analysis, core-levels and valence band mappings. The results obtained were discussed on the theoretic background employing DFT-calculations. The combined XPS and DFT analysis allows to establish and prove the final formula of the synthesized samples as Cx-TiO2:[Cu+][Cu2+] for the bulk and Cx-TiO2:[Cu+][Cu0] for thin-films. It was demonstrated the in the mode of heavy carbon-loadings the remaining majority of neutral C-C bonds (sp3-type) is dominating and only a lack of embedded carbon is fabricating the O-C=O clusters. No valence base-band width altering was established after sequential carbon-copper modification of the atomic structure of initial TiO2-hosts except the dominating majority of Cu 3s states after Cu-sensitization. The crucial role of neutral carbon low-dimensional impurities as the precursors for the new phases growth was shown for Cu-sensitized Cx-TiO2 intermediate-state hosts. △ Less

Submitted 19 July, 2017; originally announced July 2017.

Comments: 27 pages, 7 figures, accepted to Solid State Sciences

Development of theoretical descriptors for cytotoxicity evaluation of metallic nanoparticles

Authors: D. W. Boukhvalov, T. H. Yoon

Abstract: Motivated by the recent development of quantitative structure-activity relationship (QSAR) methods in the area of nanotoxicology, we proposed an approach to develop additional descriptors based on results of first principles calculations. For evaluation of the biochemical activity of metallic nanoparticles, we consider two processes: ion extraction from the surface of a specimen to aqueous media a… ▽ More Motivated by the recent development of quantitative structure-activity relationship (QSAR) methods in the area of nanotoxicology, we proposed an approach to develop additional descriptors based on results of first principles calculations. For evaluation of the biochemical activity of metallic nanoparticles, we consider two processes: ion extraction from the surface of a specimen to aqueous media and water dissociation on the surface. We performed calculations for a set of metals (Al, Fe, Cu, Ag, Au, Pt). Taking into account the diversity of atomic structures of real metallic nanoparticles, we performed calculations for different models such as (001) and (111) surfaces, nanorods, and two different cubic nanoparticles of 0.6 and 0.3 nm size. Significant energy dependence of the processes from the selected model of nanoparticle suggests that for the correct description we should combine the calculations for the several representative models. In addition to the descriptors of chemical activity of the metallic nanoparticles for the two studied processes, we propose descriptors for taking into account the dependence of chemical activity from the size and shape of nanoparticles. Routes to minimization of computational costs for these calculations are also discussed. △ Less

Submitted 27 June, 2017; originally announced June 2017.

Comments: 22 pages, 5 figures, accepted to Chem. Res. Toxicol

XPS and DFT study of pulsed Bi-implantation of bulk and thin-films of ZnO - the role of oxygen imperfections

Authors: D. A. Zatsepin, D. W. Boukhvalov, N. V. Gavrilov, E. Z. Kurmaev, I. S. Zhidkov

Abstract: An atomic and electronic structure of the bulk and thin-film morphologies of ZnO were modified using pulsed Bi-ion implantation (1x1017 cm-2 fluence, 70 min exposure under Bi-ion beam, EBi+ = 30 keV, pulsed ion-current density of not more than 0.8 mA/cm2 with a repetition rate of 12.5 Hz). The final samples were qualified by X-ray photoelectron core-level and valence band mapping spectroscopy appl… ▽ More An atomic and electronic structure of the bulk and thin-film morphologies of ZnO were modified using pulsed Bi-ion implantation (1x1017 cm-2 fluence, 70 min exposure under Bi-ion beam, EBi+ = 30 keV, pulsed ion-current density of not more than 0.8 mA/cm2 with a repetition rate of 12.5 Hz). The final samples were qualified by X-ray photoelectron core-level and valence band mapping spectroscopy applying ASTM materials science standard. The spectroscopy data obtained was discussed on the basis of DFT-models for Bi-embedding into ZnO host-matrices. It was established that in the case of direct Bi-impurities insertion into the employed ZnO-host for both studied morphologies neither the only "pure" Bi2O3-like phase nor the only "pure" Bi-metal will be preferable to appear as a secondary phase. An unfavorability of the large cluster agglomeration of Bi-impurities in ZnO-hosts has been shown and an oxygen 2s electronic states pleomorphizm was surely established. △ Less

Submitted 5 July, 2016; originally announced July 2016.

Comments: 20 pages, 8 figures, 2 tables, accepted to Appl. Surf. Sci

Charge transfer and weak bonding between molecular oxygen and graphene zigzag edges at low temperatures

Authors: D. W. Boukhvalov, V. Yu. Osipov, A. I. Shames, K. Takai, T. Hayashi, T. Enoki

Abstract: Electron paramagnetic resonance (EPR) study of air-physisorbed defective carbon nano-onions evidences in favor of microwave assisted formation of weakly-bound paramagnetic complexes comprising negatively-charged O2- ions and edge carbon atoms carrying pi-electronic spins. These complexes being located on the graphene edges are stable at low temperatures but irreversibly dissociate at temperatures… ▽ More Electron paramagnetic resonance (EPR) study of air-physisorbed defective carbon nano-onions evidences in favor of microwave assisted formation of weakly-bound paramagnetic complexes comprising negatively-charged O2- ions and edge carbon atoms carrying pi-electronic spins. These complexes being located on the graphene edges are stable at low temperatures but irreversibly dissociate at temperatures above 50-60 K. These EPR findings are justified by density functional theory (DFT) calculations demonstrating transfer of an electron from the zigzag edge of graphene-like material to oxygen molecule physisorbed on the graphene sheet edge. This charge transfer causes changing the spin state of the adsorbed oxygen molecule from S = 1 to S = 1/2 one. DFT calculations show significant changes of adsorption energy of oxygen molecule and robustness of the charge transfer to variations of the graphene-like substrate morphology (flat and corrugated mono- and bi-layered graphene) as well as edges passivation. The presence of H- and COOH- terminated edge carbon sites with such corrugated substrate morphology allows formation of ZE-O2- paramagnetic complexes characterized by small (<50 meV) binding energies and also explains their irreversible dissociation as revealed by EPR. △ Less

Submitted 9 June, 2016; originally announced June 2016.

Comments: 28 pages, 8 figures, 2 tables, accepted in Carbon journal

Pleomorphic structural imperfections caused by pulsed Bi-implantation in the bulk and thin-film morphologies of TiO2

Authors: D. A. Zatsepin, D. W. Boukhvalov, E. Z. Kurmaev, N. V. Gavrilov, S. S. Kim, I. S. Zhidkov

Abstract: The results of combined experimental and theoretical study of substitutional and clustering effects in Bi-doped TiO2 hosts (bulk and thin-film morphologies) are presented. Bi-doping of the bulk and thin-film titanium dioxide was made with help of pulsed ion-implantation (E(Bi+) = 30 keV, D = 1 * 1017 cm-2) without posterior tempering. The X-ray photoelectron spectroscopy (XPS) qualification (core-… ▽ More The results of combined experimental and theoretical study of substitutional and clustering effects in Bi-doped TiO2 hosts (bulk and thin-film morphologies) are presented. Bi-doping of the bulk and thin-film titanium dioxide was made with help of pulsed ion-implantation (E(Bi+) = 30 keV, D = 1 * 1017 cm-2) without posterior tempering. The X-ray photoelectron spectroscopy (XPS) qualification (core-levels and valence bands) and Density-Functional Theory (DFT) calculations were employed in order to study the electronic structure of Bi-ion implanted TiO2 samples. According to XPS data obtained and DFT calculations, the Bi -> Ti cation substitution occurs in Bi-implanted bulk TiO2, whereas in the thin-film morphology of TiO2:Bi the Bi-atoms have metal-like clusters segregation tendency. Based on the combined XPS and DFT considerations the possible reasons and mechanism for the observed effects are discussed. It is believed that established peculiarities of bismuth embedding into employed TiO2 hosts are mostly the sequence of pleomorphic origin for the formed "bismuth-oxygen" chemical bonding. △ Less

Submitted 18 April, 2016; originally announced April 2016.

Comments: 19 pages, 6 figures, accepted in Appl. Surf. Sci

Absence of stable atomic structure in fluorinated graphene

Authors: Danil W. Boukhvalov

Abstract: Based on the results of first-principles calculations we demonstrate that significant distortion of graphene sheets caused by adsorption of fluorine atoms leads to the formation of metastable patterns for which the next step of fluorination is considerably less energetically favorable. Existence of these stable patterns oriented along the armchair direction makes possible the synthesis of various… ▽ More Based on the results of first-principles calculations we demonstrate that significant distortion of graphene sheets caused by adsorption of fluorine atoms leads to the formation of metastable patterns for which the next step of fluorination is considerably less energetically favorable. Existence of these stable patterns oriented along the armchair direction makes possible the synthesis of various CFx structures. The combination of strong distortion of the nonfluorinated graphene sheet with the doping caused by the polar nature of C-F bonds reduces the energy cost of migration and the energy of migration barriers, making possible the migration of fluorine atoms on the graphene surface as well as transformation of the shapes of fluorinated areas. The decreasing energy cost of migration with increasing fluorine content also leads to increasing numbers of single fluorine adatoms, which could be the source of magnetic moments. △ Less

Submitted 18 April, 2016; v1 submitted 10 March, 2016; originally announced March 2016.

Comments: 16 pages, 6 figures (one figure added), accepted in PCCP

Sn-loss effect in a Sn-implanted a-SiO2 host-matrix after thermal annealing: A combined XPS, PL, and DFT study

Authors: D. A. Zatsepin, A. F. Zatsepin, D. W. Boukhvalov, E. Z. Kurmaev, N. V. Gavrilov

Abstract: Amorphous a-SiO2 host-matrices were implanted with Sn-ions with and without posterior thermal tempering at 900 °C for 1 hour in ambient air. X-ray photoelectron spectroscopy analysis (XPS core-levels, XPS valence band mapping), photoluminescence (PL) probing, and density functional calculations (DFT) were employed to enable a detailed electronic structure characterization of these samples. It was… ▽ More Amorphous a-SiO2 host-matrices were implanted with Sn-ions with and without posterior thermal tempering at 900 °C for 1 hour in ambient air. X-ray photoelectron spectroscopy analysis (XPS core-levels, XPS valence band mapping), photoluminescence (PL) probing, and density functional calculations (DFT) were employed to enable a detailed electronic structure characterization of these samples. It was experimentally established that the process of Sn-embedding into the a-SiO2 host occurs following two dissimilar trends: the Sn4+ -> Si4+ substitution in a-SiO2:Sn (without tempering), and Sn-metal clustering as interstitials in a-SiO2:Sn (900 °C, 1 hour). Both trends were modeled using calculated formation energies and partial densities of states (PDOS) as well as valence band (VB) simulations, which yielded evidence that substitutional defect generation occurs with the help of ion-implantation stimulated translocation of the host-atoms from their stoichiometric positions to the interstitial void. Experimental and theoretical data obtained coincide in terms of the reported Sn-loss effect in a-SiO2:Sn (900 °C, 1 hour) due to thermally-induced electronic host-structure re-arraignment, which manifests as backward host-atoms translocation into stoichiometric positions and the posterior formation of Sn-metal clusters. △ Less

Submitted 14 January, 2016; originally announced January 2016.

Comments: 21 pages, 7 figures, accepted to Appl. Surf. Sci

Electronic structure and photoluminescence properties of Zn-ion implanted silica glass before and after thermal annealing

Authors: D. A. Zatsepin, A. F. Zatsepin, D. W. Boukhvalov, E. Z. Kurmaev, Z. V. Pchelkina, N. V. Gavrilov

Abstract: The results of XPS core-level and valence band measurements, photoluminescence spectra of a-SiO2 implanted by Zn-ions (E=30 keV, D=1*1017 cm^-2) and Density Functional Theory calculations of electronic structure as well as formation energies of structural defects in silica glass induced by Zn-ion implantation are presented. Both theory and experiment show that it is energetically more favorable fo… ▽ More The results of XPS core-level and valence band measurements, photoluminescence spectra of a-SiO2 implanted by Zn-ions (E=30 keV, D=1*1017 cm^-2) and Density Functional Theory calculations of electronic structure as well as formation energies of structural defects in silica glass induced by Zn-ion implantation are presented. Both theory and experiment show that it is energetically more favorable for implanted zinc ions to occupy the interstitial positions instead of cation substitution. As a result, the Zn-ions embedded to interstitials, form chemical bonds with the surrounding oxygen atoms, formation ZnO-like nanoparticles and oxygen-deficient SiOx matrix. The subsequent thermal annealing at 900 0C (1 hr) strongly reduces the amount of ZnO nanoparticles and induces the formation of α-Zn2SiO4 phase which markedly enhances the green emission. △ Less

Submitted 1 October, 2015; originally announced October 2015.

Comments: 17 pages, 6 figures, accepted to J. Non-Crystalline Solids

Atomic and electronic structure of nitrogen- and boron-doped phosphorene

Authors: Danil W. Boukhvalov

Abstract: First principle modeling of nitrogen- and boron-doped phosphorene demonstrates the tendency toward formation of highly ordered structures. Nitrogen doping leads to the formation of -N-P-P-P-N- lines. Further transformation to -P-N-P-N- lines across the chains of phosphorene occurs with increasing band gap and increasing nitrogen concentration, which coincides with the decreasing chemical activity… ▽ More First principle modeling of nitrogen- and boron-doped phosphorene demonstrates the tendency toward formation of highly ordered structures. Nitrogen doping leads to the formation of -N-P-P-P-N- lines. Further transformation to -P-N-P-N- lines across the chains of phosphorene occurs with increasing band gap and increasing nitrogen concentration, which coincides with the decreasing chemical activity of N-doped phosphorene. In contrast to the case of nitrogen, boron atoms prefer to form -B-B- pairs with the further formation of -P-P-B-B-P-P- patterns along the phosphorene chains. The low concentration of boron dopants converts the phosphorene from a semiconductor into a semimetal with the simultaneous enhancement of its chemical activity. Co-doping of phosphorene by both boron and nitrogen starts from the formation of -B-N- pairs, which provide flat bands and the further transformation of these pairs to hexagonal BN lines and ribbons across the phosphorene chains. △ Less

Submitted 21 September, 2015; originally announced September 2015.

Comments: 21 pages, 8 figures, 2 tables, to appear at PCCP

The characterization of Co-nanoparticles supported on graphene

Authors: P. Bazylewski, D. W. Boukhvalov, A. I. Kukharenko, E. Z. Kurmaev, A. Hunt, A. Moewes, Y. H. Lee, S. O. Cholakh, G. S. Chang

Abstract: The results of density functional theory calculations and measurements using X-ray photoelectron spectroscopy of Co-nanoparticles dispersed on graphene/Cu are presented. It is found that for low cobalt thickness (0.02 nm - 0.06 nm) the Co forms islands distributed non-homogeneously which are strongly oxidized under exposure to air to form cobalt oxides. At greater thicknesses up to 2 nm the upper… ▽ More The results of density functional theory calculations and measurements using X-ray photoelectron spectroscopy of Co-nanoparticles dispersed on graphene/Cu are presented. It is found that for low cobalt thickness (0.02 nm - 0.06 nm) the Co forms islands distributed non-homogeneously which are strongly oxidized under exposure to air to form cobalt oxides. At greater thicknesses up to 2 nm the upper Co-layers are similarly oxidized whereas the lower layers contacting the graphene remain metallic. The measurements indicate a Co2+ oxidation state with no evidence of a 3+ state appearing at any Co thickness, consistent with CoO and Co[OH]2. The results show that thicker Co (2nm) coverage induces the formation of a protective oxide layer while providing the magnetic properties of Co nanoparticles. △ Less

Submitted 2 September, 2015; originally announced September 2015.

Comments: 20 pages, 8 figures, accepted to RSC Advances. arXiv admin note: text overlap with arXiv:1411.3611

Charge Transfer Induced Molecular Hole Doping into Thin Film of Metal-Organic-Frameworks

Authors: Deok Yeon Lee, Eun-Kyung Kim, Nabeen K. Shrestha, Danil W. Boukhvalov, Joong Kee Lee, Sung-Hwan Han

Abstract: Despite the highly porous nature with significantly large surface area, metal organic frameworks (MOFs) can be hardly used in electronic, and optoelectronic devices due to their extremely poor electrical conductivity. Therefore, the study of MOF thin films that require electron transport or conductivity in combination with the everlasting porosity is highly desirable. In the present work, thin fil… ▽ More Despite the highly porous nature with significantly large surface area, metal organic frameworks (MOFs) can be hardly used in electronic, and optoelectronic devices due to their extremely poor electrical conductivity. Therefore, the study of MOF thin films that require electron transport or conductivity in combination with the everlasting porosity is highly desirable. In the present work, thin films of Co3(NDC)3DMF4 MOFs with improved electronic conductivity are synthesized using layer-by-layer and doctor blade coating techniques followed by iodine doping. The as-prepared and doped films are characterized using FE-SEM, EDX, UV/Visible spectroscopy, XPS, current-voltage measurement, photoluminescence spectroscopy, cyclic voltammetry, and incident photon to current efficiency measurements. In addition, the electronic and semiconductor property of the MOF films are characterized using Hall Effect measurement, which reveals that in contrast to the insulator behavior of the as-prepared MOFs, the iodine doped MOFs behave as a p-type semiconductor. This is caused by charge transfer induced hole doping into the frameworks. The observed charge transfer induced hole doping phenomenon is also confirmed by calculating the densities of states of the as-prepared and iodine doped MOFs based on density functional theory. Photoluminescence spectroscopy demonstrate an efficient interfacial charge transfer between TiO2 and iodine doped MOFs, which can be applied to harvest solar radiations. △ Less

Submitted 10 August, 2015; originally announced August 2015.

Comments: Main paper (19 pages, 6 figures) and supplementary information (15 pages, 10 figures), accepted in ACS Appl. Materials & Interfaces

Structural defects and electronic structure of N-ion implanted TiO2: bulk versus thin film

Authors: D. A. Zatsepin, D. W. Boukhvalov, E. Z. Kurmaev, I. S. Zhidkov, N. V. Gavrilov, M. A. Korotin, S. S. Kim

Abstract: Systematic investigation of atomic structure of N-ion implanted TiO2 (thin films and bulk ceramics) was performed by XPS measurements (core levels and valence bands) and first-principles density functional theory (DFT) calculations. In bulk samples experiment and theory demonstrate anion N->O substitution. For the thin films case experiments evidence valuable contributions from N2 and NO molecule-… ▽ More Systematic investigation of atomic structure of N-ion implanted TiO2 (thin films and bulk ceramics) was performed by XPS measurements (core levels and valence bands) and first-principles density functional theory (DFT) calculations. In bulk samples experiment and theory demonstrate anion N->O substitution. For the thin films case experiments evidence valuable contributions from N2 and NO molecule-like structures and theoretical modeling reveals a possibility of formation of these species as result of the appearance of interstitial nitrogen defects on the various surfaces of TiO2. Energetics of formation of oxygen vacancies and its key role for band gap reduction is also discussed. △ Less

Submitted 28 July, 2015; originally announced July 2015.

Comments: 19 pages, 6 figures, 3 tables, accepted in Appl. Surf. Sci

Journal ref: Appl. Surf. Sci. 984-988, 355 (2015)

Octahedral conversion of a-SiO2-host matrix by pulsed ion implantation

Authors: D. A. Zatsepin, A. F. Zatsepin, D. W. Boukhvalov, E. Z. Kurmaev, N. V. Gavrilov, N. A. Skorikov, A. von Czarnowski, H. -J. Fitting

Abstract: This is the abstract. The results of measurements of X-ray photoelectron spectra (XPS) of a-SiO2-host material after pulsed implantation with [Mn+] and [Co+, Mn+]-ions as well as DFT-calculations are presented. The low-energy shift is found in XPS Si 2p and O 1s core-levels of single [Mn+] and dual [Co+, Mn+] pulsed ion-implanted a-SiO2 (E = 30 keV, D = 2*10^17 cm^-2) with respect to those of untr… ▽ More This is the abstract. The results of measurements of X-ray photoelectron spectra (XPS) of a-SiO2-host material after pulsed implantation with [Mn+] and [Co+, Mn+]-ions as well as DFT-calculations are presented. The low-energy shift is found in XPS Si 2p and O 1s core-levels of single [Mn+] and dual [Co+, Mn+] pulsed ion-implanted a-SiO2 (E = 30 keV, D = 2*10^17 cm^-2) with respect to those of untreated a-SiO2.The similar changes are found in XPS Si 2p and O 1s of stishovite compared to those of quartz. This means that the pulsed ion-implantation induces the local high pressure effect which leads to an appearance of SiO6-structural units in alpha-SiO2 host, forming "stishovite-like" local atomic structure. This process can be described within electronic bonding transition from the four-fold "quartz-like" to six-fold "stishovite-like" high-pressure phase in SiO2 host-matrix. It is found that such octahedral conversion depends on the fluence and starts with doses higher than D = 3*10^16 cm^-2. △ Less

Submitted 26 May, 2015; originally announced May 2015.

Comments: 15 pages, 6 figures, 1 table, accepted in phys. stat. solidi (b)

XPS and DFT study of Sn incorporation into ZnO and TiO2 host matrices by pulsed ion implantation

Authors: D. A. Zatsepin, D. W. Boukhvalov, E. Z. Kurmaev, I. S. Zhidkov, S. S. Kim, L. Cui, N. V. Gavrilov, S. O. Cholakh

Abstract: Bulk and thin films ZnO and TiO2 samples were doped with Sn by pulsed ion implantation and studied by means of X-ray photoelectron core-level and valence band spectroscopy as well as density functional theory calculations for comprehensive study of the incorporation of Sn. XPS spectral analysis showed that isovalent Sn cation substitution occurs in both zinc oxide (Sn2+ -> Zn2+) and titanium dioxi… ▽ More Bulk and thin films ZnO and TiO2 samples were doped with Sn by pulsed ion implantation and studied by means of X-ray photoelectron core-level and valence band spectroscopy as well as density functional theory calculations for comprehensive study of the incorporation of Sn. XPS spectral analysis showed that isovalent Sn cation substitution occurs in both zinc oxide (Sn2+ -> Zn2+) and titanium dioxide (Sn4+ -> Ti4+) for bulk and film morphologies. For TiO2 films, the implantation also led to occupation of interstitials by doped ions, which induced the clustering of substituted and embedded Sn atoms; this did not occur in ZnO:Sn film samples. Density functional theory (DFT) formation energies were calculated of various incorporation processes, explaining the prevalence of substitutional defects in both matrices. Possible mechanisms and reasons for the observed trends in Sn incorporation into the ZnO and TiO2 matrices are discussed. △ Less

Submitted 5 May, 2015; originally announced May 2015.

Comments: 17 pages, 7 figures, accepted to phys. stat. solidi (b)

Report number: Phys. Status Solidi B 252, No. 8, 1890--1896 (2015)

Chemical modifications and stability of phosphorene with impurities: A first principles study

Authors: D. W. Boukhvalov, A. N. Rudenko, D. A. Prishchenko, V. G. Mazurenko, M. I. Katsnelson

Abstract: We perform a systematic first-principles study of phosphorene in the presence of typical monovalent (hydrogen, fluorine) and divalent (oxygen) impurities. The results of our modeling suggest a decomposition of phosphorene into weakly bonded one-dimensional (1D) chains upon single- and double-side hydrogenation and fluorination. In spite of a sizable quasiparticle band gap (2.29 eV), fully hydrogen… ▽ More We perform a systematic first-principles study of phosphorene in the presence of typical monovalent (hydrogen, fluorine) and divalent (oxygen) impurities. The results of our modeling suggest a decomposition of phosphorene into weakly bonded one-dimensional (1D) chains upon single- and double-side hydrogenation and fluorination. In spite of a sizable quasiparticle band gap (2.29 eV), fully hydrogenated phosphorene found to be dynamically unstable. In contrast, full fluorination of phosphorene gives rise to a stable structure, being an indirect gap semiconductor with the band gap of 2.27 eV. We also show that fluorination of phosphorene from the gas phase is significantly more likely than hydrogenation due to the relatively low energy barrier for the dissociative adsorption of F2 (0.19 eV) compared to H2 (2.54 eV). At low concentrations, monovalent impurities tend to form regular atomic rows phosphorene, though such patterns do not seem to be easily achievable due to high migration barriers (1.09 and 2.81 eV for H2 and F2, respectively). Oxidation of phosphorene is shown to be a qualitatively different process. Particularly, we observe instability of phosphorene upon oxidation, leading to the formation of disordered amorphous-like structures at high concentrations of impurities. △ Less

Submitted 30 April, 2015; v1 submitted 1 April, 2015; originally announced April 2015.

Comments: 20 pages, 1 table, 6 figures (minor correction, one figure added), to appear in Phys. Chem. Chem. Phys

Atomic, electronic and magnetic structure of graphene/iron and nickel interfaces: theory and experiment

Authors: D. W. Boukhvalov, Yu. N. Gornostyrev, M. A. Uimin, A. V. Korolev, A. Ye Yermakov

Abstract: First-principles calculations of the effect of carbon coverage on the atomic, electronic and magnetic structure of nickel and iron substrates demonstrate insignificant changes in the interatomic distances and magnetic moments on the atoms of the metallic substrates. The coverage of the iron surface by mono- and few-layer graphene induces significant changes in the orbital occupancies and exchange… ▽ More First-principles calculations of the effect of carbon coverage on the atomic, electronic and magnetic structure of nickel and iron substrates demonstrate insignificant changes in the interatomic distances and magnetic moments on the atoms of the metallic substrates. The coverage of the iron surface by mono- and few-layer graphene induces significant changes in the orbital occupancies and exchange interactions between the layers in contrast to the case of a nickel substrate for which changes in the orbital ordering and exchange interactions are much smaller. Experimental measurements demonstrate the presence of ferromagnetic fcc-iron in Fe@C nanoparticles and the superparamagnetic behavior of Ni@C nanoparticles. △ Less

Submitted 23 December, 2014; originally announced December 2014.

Comments: 19 pages, 7 figures, accepted to RSC Advances

The characterization of Co-nanoparticles supported on graphene

Authors: Paul Bazylewski, Danil W. Boukhvalov, Andrey I. Kukharenko, Ernst. Z. Kurmaev, Nikolay A. Skorikov, Adrian Hunt, Alexander Moewes, Young Hee Lee, Seif O. Cholakh, Gap Soo Chang

Abstract: The results of density functional theory (DFT) calculations and measurements of X-ray photoelectron (XPS) and X-ray emission (XES) spectra of Co-nanoparticles dispersed on graphene/Cu composites are presented. It is found that for 0.02nm and 0.06nm Co coverage the Co atoms form islands which are strongly oxidized under exposure at the air. For Co (2nm) coverage the upper Co-layers is oxidized wher… ▽ More The results of density functional theory (DFT) calculations and measurements of X-ray photoelectron (XPS) and X-ray emission (XES) spectra of Co-nanoparticles dispersed on graphene/Cu composites are presented. It is found that for 0.02nm and 0.06nm Co coverage the Co atoms form islands which are strongly oxidized under exposure at the air. For Co (2nm) coverage the upper Co-layers is oxidized whereas the lower layers contacting with graphene is in metallic state. Therefore Co (2 nm) coverage induces the formation of protective oxide layer providing the ferromagnetic properties of Co nanoparticles which can be used as spin filters in spintronics devices. △ Less

Submitted 17 November, 2014; v1 submitted 13 November, 2014; originally announced November 2014.

Comments: 14 pages, 9 figures

Modification of titanium and titanium dioxide surfaces by ion implantation: combined XPS and DFT study

Authors: D. W. Boukhvalov, D. M. Korotin, A. I. Efremov, E. Z. Kurmaev, Ch. Borchers, I. S. Zhidkov, D. V. Gunderov, R. Z. Valiev, N. V. Gavrilov, S. O. Cholakh

Abstract: The results of XPS measurements (core levels and valence bands) of P+, Ca+, P+Ca+ and Ca+P+ ion implanted (E=30 keV, D=1x1017 cm-2) commercially pure titanium (cp-Ti) and first-principles density functional theory (DFT) calculations demonstrates formation of various structural defects in titanium dioxide films formed on the surface of implanted materials. We have found that for double implantation… ▽ More The results of XPS measurements (core levels and valence bands) of P+, Ca+, P+Ca+ and Ca+P+ ion implanted (E=30 keV, D=1x1017 cm-2) commercially pure titanium (cp-Ti) and first-principles density functional theory (DFT) calculations demonstrates formation of various structural defects in titanium dioxide films formed on the surface of implanted materials. We have found that for double implantation (Ti:P+,Ca+ and Ti:Ca+,P+) the outermost surface layer formed mainly by Ca and P, respectively, i.e. the implantation sequence is very important. The DFT calculations show that under P+ and Ca+P+ ion implantation the formation energies for both cation (P-Ti) and anion (P-O) substitutions are comparable which can induce the creation of [PO4]3- and Ti-P species. For Ca+ and P+Ca+-ion implantation the calculated formation energies correspond to Ca2+-Ti4+ cation substitution. This conclusion is in agreement with XPS Ca 2p and Ti 2p core levels and valence band measurements and DFT calculations of electronic structure of related compounds. The conversion of implanted ions to Ca2+ and [PO4]3- species provides a good biocompatibility of cp-Ti for further formation of hydroxyapatite. △ Less

Submitted 5 November, 2014; originally announced November 2014.

Comments: 18 pages, 6 figures, 3 tables, accepted phys. stat. solidi (b)

Oxidation of graphite surface: the role of water

Authors: D. W. Boukhvalov

Abstract: Based on density functional calculations, we demonstrate a significant difference in oxidation patterns between graphene and graphite and the formation of defects after oxidation. Step-by-step modeling demonstrates that oxidation of 80% of the graphite surface is favorable. Oxidation above half of the graphite surface significantly decreases the energy costs of vacancy formation with CO2 productio… ▽ More Based on density functional calculations, we demonstrate a significant difference in oxidation patterns between graphene and graphite and the formation of defects after oxidation. Step-by-step modeling demonstrates that oxidation of 80% of the graphite surface is favorable. Oxidation above half of the graphite surface significantly decreases the energy costs of vacancy formation with CO2 production. The presence of water is crucial in the transformation of epoxy groups to hydroxyl, the intercalation with further bundle and exfoliation. In water-rich conditions, water intercalates graphite at the initial stages of oxidation and oxidation, which is similar to the oxidation process of free-standing graphene; in contrast, in water-free conditions, large molecules intercalate graphite only after oxidation occurs on more than half of the surface. △ Less

Submitted 4 November, 2014; originally announced November 2014.

Comments: 10 pages, 3 figures, accepted to J. Phys. Chem. C

Proton transport through one atom thick crystals

Authors: S. Hu, M. Lozada-Hidalgo, F. C. Wang, A. Mishchenko, F. Schedin, R. R. Nair, E. W. Hill, D. W. Boukhvalov, M. I. Katsnelson, R. A. W. Dryfe, I. V. Grigorieva, H. A. Wu, A. K. Geim

Abstract: Graphene is impermeable to all gases and liquids, and even such a small atom as hydrogen is not expected to penetrate through graphene's dense electronic cloud within billions of years. Here we show that monolayers of graphene and hexagonal boron nitride (hBN) are unexpectedly permeable to thermal protons, hydrogen ions under ambient conditions. As a reference, no proton transport could be detecte… ▽ More Graphene is impermeable to all gases and liquids, and even such a small atom as hydrogen is not expected to penetrate through graphene's dense electronic cloud within billions of years. Here we show that monolayers of graphene and hexagonal boron nitride (hBN) are unexpectedly permeable to thermal protons, hydrogen ions under ambient conditions. As a reference, no proton transport could be detected for a monolayer of molybdenum disulfide, bilayer graphene or multilayer hBN. At room temperature, monolayer hBN exhibits the highest proton conductivity with a low activation energy of about 0.3 eV but graphene becomes a better conductor at elevated temperatures such that its resistivity to proton flow is estimated to fall below 10^-3 Ohm per cm2 above 250 C. The proton barriers can be further reduced by decorating monolayers with catalytic nanoparticles. These atomically thin proton conductors could be of interest for many hydrogen-based technologies. △ Less

Submitted 31 October, 2014; originally announced October 2014.

Comments: submitted, pre-edited version

Journal ref: Nature 516, 227-230 (2014)

Local structure of Fe impurity atoms in ZnO: bulk versus surface

Authors: J. A. McLeod, D. W. Boukhvalov, D. A. Zatsepin, R. J. Green, B. Leedahl, L. Cui, E. Z. Kurmaev, I. S. Zhidkov, L. D. Finkelstein, N. V. Gavrilov, S. O. Cholakh, A. Moewes

Abstract: By studying Fe-doped ZnO pellets and thin films with various x-ray spectroscopic techniques, and complementing this with density functional theory calculations, we find that Fe-doping in bulk ZnO induces isovalent (and isostructural) cation substitution (Fe2+ -> Zn2+). In contrast to this, Fe-doping near the surface produces both isovalent and heterovalent substitution (Fe3+ -> Zn2+). The calculat… ▽ More By studying Fe-doped ZnO pellets and thin films with various x-ray spectroscopic techniques, and complementing this with density functional theory calculations, we find that Fe-doping in bulk ZnO induces isovalent (and isostructural) cation substitution (Fe2+ -> Zn2+). In contrast to this, Fe-doping near the surface produces both isovalent and heterovalent substitution (Fe3+ -> Zn2+). The calculations performed herein suggest that the most likely defect structure is the single or double substitution of Zn with Fe, although, if additional oxygen is available, then Fe substitution with interstitial oxygen is even more energetically favourable. Furthermore, it is found that ferromagnetic states are energetically unfavourable, and ferromagnetic ordering is likely to be realized only through the formation of a secondary phase (i.e. ZnFe2O4), or codoping with Cu. △ Less

Submitted 16 February, 2014; originally announced February 2014.

Comments: 29+ pages, 8 figures, 1 table. Accepted to J. Phys. Chem. C

Structural defects induced by Fe-ion implantation in TiO2

Authors: B. Leedahl, D. A. Zatsepin, D. W. Boukhvalov, R. J. Green, J. A. McLeod, S. S. Kim, E. Z. Kurmaev, I. S. Zhidkov, N. V. Gavrilov, S. O. Cholakh, A. Moewes

Abstract: X-ray photoelectron spectroscopy (XPS) and resonant x-ray emission spectroscopy (RXES) measurements of pellet and thin film forms of TiO$_2$ with implanted Fe ions are presented and discussed. The findings indicate that Fe-implantation in a TiO$_2$ pellet sample induces heterovalent cation substitution (Fe$^{2+}\rightarrow$ Ti$^{4+}$) beneath the surface region. But in thin film samples, the clust… ▽ More X-ray photoelectron spectroscopy (XPS) and resonant x-ray emission spectroscopy (RXES) measurements of pellet and thin film forms of TiO$_2$ with implanted Fe ions are presented and discussed. The findings indicate that Fe-implantation in a TiO$_2$ pellet sample induces heterovalent cation substitution (Fe$^{2+}\rightarrow$ Ti$^{4+}$) beneath the surface region. But in thin film samples, the clustering of Fe atoms is primarily detected. In addition to this, significant amounts of secondary phases of Fe$^{3+}$ are detected on the surface of all doped samples due to oxygen exposure. These experimental findings are compared with density functional theory (DFT) calculations of formation energies for different configurations of structural defects in the implanted TiO$_2$:Fe system. According to our calculations, the clustering of Fe-atoms in TiO$_2$:Fe thin films can be attributed to the formation of combined substitutional and interstitial defects. Further, the differences due to Fe doping in pellet and thin film samples can ultimately be attributed to different surface to volume ratios. △ Less

Submitted 1 February, 2014; originally announced February 2014.

Comments: 7+ pages, 3 Figure, to appear in J. Appl. Phys

Journal ref: J. Appl. Phys. 115, 053711 (2014)

Origin of Anomalous Water Permeation through Graphene Oxide Membrane

Authors: Danil W. Boukhvalov, Mikhail I. Katsnelson, Young-Woo Son

Abstract: Water inside the low dimensional carbon structures has been considered seriously owing to fundamental interest in its flow and structures as well as its practical impact. Recently, the anomalous perfect penetration of water through graphene oxide membrane was demonstrated although the membrane was impenetrable for other liquids and even gases. The unusual auxetic behavior of graphene oxide in the… ▽ More Water inside the low dimensional carbon structures has been considered seriously owing to fundamental interest in its flow and structures as well as its practical impact. Recently, the anomalous perfect penetration of water through graphene oxide membrane was demonstrated although the membrane was impenetrable for other liquids and even gases. The unusual auxetic behavior of graphene oxide in the presence of water was also reported. Here, based on first-principles calculations, we establish atomistic models for hybrid systems composed of water and graphene oxides revealing the anomalous water behavior inside the stacked graphene oxides. We show that formation of hexagonal ice bilayer in between the flakes as well as melting transition of ice at the edges of flakes are crucial to realize the perfect water permeation across the whole stacked structures. The distance between adjacent layers that can be controlled either by oxygen reduction process or pressure is shown to determine the water flow thus highlighting a unique water dynamics in randomly connected two-dimensional spaces. △ Less

Submitted 24 July, 2013; originally announced July 2013.

Comments: 5 pages, 4 figures, to appear in Nano Letters

Reduction of conductivity and ferromagnetism induced by Ag doping in ZnO:Co

Authors: H. Bieber, S. Colis, G. Schmerber, V. Pierron-Bohnes, D. W. Boukhvalov, E. Z. Kurmaev, L. D. Finkelstein, P. Bazylewski, A. Moewes, G. S. Chang, A. Dinia

Abstract: Cobalt and silver co-doping has been undertaken in ZnO thin films grown by pulsed laser deposition in order to investigate the ferromagnetic properties in ZnO-based diluted magnetic materials and to understand the eventual relation between ferromagnetism and charge carriers. Hall transport measurements reveal that Ag doping up to 5% leads to a progressive compensation of the native n-type carriers… ▽ More Cobalt and silver co-doping has been undertaken in ZnO thin films grown by pulsed laser deposition in order to investigate the ferromagnetic properties in ZnO-based diluted magnetic materials and to understand the eventual relation between ferromagnetism and charge carriers. Hall transport measurements reveal that Ag doping up to 5% leads to a progressive compensation of the native n-type carriers. The magnetization curves show ferromagnetic contributions for all samples at both 5 K and room temperature, decreasing with increasing the Ag concentration. First principles modeling of the possible configurations of Co-Ag defects suggest the formation of nano-clusters around interstitial Co impurity as the origin of the ferromagnetism. The Ag co-doping results in a decrease of the total spin of these clusters and of the Curie temperature. △ Less

Submitted 17 July, 2013; originally announced July 2013.

Comments: 28 pages, 8 figures, 4 tables, accepted to Thin Solid Films

Carbon mono and dioxide hydrogenation over pure and metal oxide decorated graphene oxide substrates: insight from DFT

Authors: Danil W. Boukhvalov

Abstract: Based on first principles density functional theory calculations we explore the energetics of the conversion of carbon mono and dioxide to methane over graphene oxide surfaces. Similar to the recently discovered hydration of various organic species over this catalyst, the transfer of hydrogen atoms from hydroxyl groups of graphene oxide provide a step by step transformation hydrogenation of carbon… ▽ More Based on first principles density functional theory calculations we explore the energetics of the conversion of carbon mono and dioxide to methane over graphene oxide surfaces. Similar to the recently discovered hydration of various organic species over this catalyst, the transfer of hydrogen atoms from hydroxyl groups of graphene oxide provide a step by step transformation hydrogenation of carbon oxides. Estimated yields of modeled reactions at room temperature are about 0.01% for the carbon mono and dioxide. For the modeling of graphene oxide/metal oxide composites, calculations in the presence of MO_2 (where M = V, Cr, Mn, Fe) have been performed. Results of these calculations demonstrate significant decreases of the energy costs and increases of reaction yields to 0.07%, which is comparable to the efficiency of these reactions over platinum and ruthenium-based photocatalysts. Increasing the temperature to the value 100C should provide the total conversion of carbon mono and dioxides. △ Less

Submitted 30 April, 2013; originally announced April 2013.

Comments: 10 pages, 2 figures, accepted to Graphene

Journal ref: Graphene 2(3) 109-114 (2013)

Electronic Structure and Resonant X-ray Emission Spectra of Carbon Shells of Iron Nanoparticles

Authors: V. R. Galakhov, S. N. Shamin, E. M. Mironova, M. A. Uimin, A. Ye. Yermakov, D. W. Boukhvalov

Abstract: The electronic structure of carbon shells of carbon encapsulated iron nanoparticles carbon encapsulated Fe@C has been studied by X-ray resonant emission and X-ray absorption spectroscopy. The recorded spectra have been compared to the density functional calculations of the electronic structure of graphene. It has been shown that an Fe@C carbon shell can be represented in the form of several graphe… ▽ More The electronic structure of carbon shells of carbon encapsulated iron nanoparticles carbon encapsulated Fe@C has been studied by X-ray resonant emission and X-ray absorption spectroscopy. The recorded spectra have been compared to the density functional calculations of the electronic structure of graphene. It has been shown that an Fe@C carbon shell can be represented in the form of several graphene layers with Stone-Wales defects. The dispersion of energy bands of Fe@C has been examined using the measured C Ka resonant X-ray emission spectra. △ Less

Submitted 19 March, 2013; originally announced March 2013.

Comments: 8 pages, 2 figures

Journal ref: JETP Letters 96, 710-713 (2013)

DFT modeling of the covalent functionalization of graphene: from ideal to realistic models

Authors: D. W. Boukhvalov

Abstract: The production of multiple types of graphene, such as free standing, epitaxial graphene on silicon carbide and metals, graphene in solution, chemically grown graphene-like molecules, various graphene nanoribbons, and graphene oxide with different levels of reduction and various chemical composition, demonstrate the need for additional investigation beyond the basic principles of graphene functiona… ▽ More The production of multiple types of graphene, such as free standing, epitaxial graphene on silicon carbide and metals, graphene in solution, chemically grown graphene-like molecules, various graphene nanoribbons, and graphene oxide with different levels of reduction and various chemical composition, demonstrate the need for additional investigation beyond the basic principles of graphene functionalization for avoidance of occasionally contradictions between the predictions from first-principles simulations and experimental results. Herein, we discuss the current state of modeling of the different types of graphene using density functional theory (DFT) methods. We focus on the static (substrate, shape, curvature, strain and doping) and dynamic (starting point of functionalization, migration barriers and stability of configurations) aspects that provide a more correct and selective modeling of the chemisorption of various chemical species on the graphene scaffold. Based on the recent modeling of experimentally realized functionalization of different types of graphene we can conclude that the formation of uniform one- or two-sided functionalized graphene discussed in earlier studies is an exception to the typical scenarios of graphene chemistry. The presence of different substrates, defects and lattice distortions, such as ripples and strain, results in the formation of clusters or lines from the functional groups. Several configurations of the chemical species on the graphene substrate have been found to exist with ideal models but are only stable for graphene functionalized under special conditions. The role of the technical parameters, such as the functionals and computational methods employed, and the important guidelines for the modeling of the chemical properties of various types of graphene are also discussed. △ Less

Submitted 11 January, 2013; originally announced January 2013.

Comments: 23 pages, 5 figures, mini-review to appear in RSC Advances

Selective surface functionalization at regions of high local curvature in graphene

Authors: Q. Wu, Y. Wu, Y. Hao, J. Geng, M. Charlton, S. Chen, Y. Ren, H. Ji, H. Li, D. W. Boukhvalov, R. D. Piner, C. W. Bielawski, R. S. Ruoff

Abstract: Monolayer graphene was deposited on a Si wafer substrate decorated with SiO2 nanoparticles (NPs) and then exposed to aryl radicals that were generated in situ from their diazonium precursors. Using micro-Raman mapping, the aryl radicals were found to selectively react with the regions of graphene that covered the NPs. The enhanced chemical reactivity was attributed to the increased strain energy i… ▽ More Monolayer graphene was deposited on a Si wafer substrate decorated with SiO2 nanoparticles (NPs) and then exposed to aryl radicals that were generated in situ from their diazonium precursors. Using micro-Raman mapping, the aryl radicals were found to selectively react with the regions of graphene that covered the NPs. The enhanced chemical reactivity was attributed to the increased strain energy induced by the local mechanical deformation of the graphene. △ Less

Submitted 26 November, 2012; originally announced November 2012.

Comments: 7 pages (including supplementary information), 5+3 figures. Accepted to Chemical Communications

Hydrogen dissociation catalyzed by carbon coated nickel nanoparticles: experiment and theory

Authors: A. Ye. Yermakov, D. W. Boukhvalov, M. A. Uimin, E. S. Lokteva, A. V. Erokhin, N. N. Schegoleva

Abstract: Based on combination of experimental measurements and first-principles calculations we report a novel carbon-based catalytic material and describe significant acceleration of the hydrogenation of magnesium at room temperature in presence of nickel nanoparticles wrapped in multilayer graphene. Increase of the rate of magnesium hydrogenation in contrast to the mix of graphite and nickel nanoparticle… ▽ More Based on combination of experimental measurements and first-principles calculations we report a novel carbon-based catalytic material and describe significant acceleration of the hydrogenation of magnesium at room temperature in presence of nickel nanoparticles wrapped in multilayer graphene. Increase of the rate of magnesium hydrogenation in contrast to the mix of graphite and nickel nanoparticles evidences intrinsic catalytic properties of explored nanocomposites. Results of simulations demonstrate that the doping from metal substrate and the presence of Stone-Wales defects turn multilayer graphene from chemically inert to chemically active mode. The role of the size of nanoparticles and temperature are also discussed. △ Less

Submitted 11 November, 2012; originally announced November 2012.

Comments: 4+ two column pages, 6 figures, accepted in ChemPhysChem