-
Surface Sensitive Raman Response of Metal-Supported Monolayer MoS$_2$
Authors:
Francesco Tumino,
Sergio Tosoni,
Paolo D'Agosta,
Valeria Russo,
Carlo Enrico Bottani,
Andrea Li Bassi,
Carlo Spartaco Casari
Abstract:
The Raman spectrum of monolayer (ML) MoS$_2$ is remarkably affected by the interaction with metals. In this work we studied ML-MoS$_2$ supported by the Ag(111) and Ag(110) surfaces by using a combined experimental and theoretical approach. The MoS$_2$ layer was directly grown on atomically clean Ag(111) and Ag(110) surfaces by pulsed laser deposition, followed by in-situ thermal annealing under ul…
▽ More
The Raman spectrum of monolayer (ML) MoS$_2$ is remarkably affected by the interaction with metals. In this work we studied ML-MoS$_2$ supported by the Ag(111) and Ag(110) surfaces by using a combined experimental and theoretical approach. The MoS$_2$ layer was directly grown on atomically clean Ag(111) and Ag(110) surfaces by pulsed laser deposition, followed by in-situ thermal annealing under ultra-high vacuum conditions. The morphology and structure of the two systems were characterized in-situ by scanning tunneling microscopy, providing atomic-scale information on the relation between the MoS$_2$ lattice and the underlying surface. Raman spectroscopy revealed differences between the two MoS$_2$-metal interfaces, especially concerning the behavior of the out-of-plane $A'_1$ vibrational mode, which splits into two contributions on Ag(110). The metal-induced effects on MoS$_2$ vibrational modes are further evidenced by transferring MoS$_2$ onto a more inert substrate (SiO$_2$/Si), where the MoS$_2$ Raman response displays a more ``freestanding-like'' behavior. The experimental data were interpreted with the support of ab-initio calculations of the vibrational modes, which provided insight into the effect of interface properties, such as strain and out-of-plane distortion. Our results highlight the influence of the interaction with metals on MoS$_2$ vibrational properties, and show the high sensitivity of MoS$_2$ Raman modes to the surface structure of the supporting metal.
△ Less
Submitted 11 April, 2025; v1 submitted 31 March, 2025;
originally announced April 2025.
-
Vibrational properties of graphdiynes as 2D carbon materials beyond graphene
Authors:
P. Serafini,
A. Milani,
M. Tommasini,
C. Castiglioni,
D. M. Proserpio,
C. E. Bottani,
C. S. Casari
Abstract:
Two-dimensional (2D) hybrid sp-sp2 carbon systems are an appealing subject for science and technology. For these materials, topology and structure significantly affect electronic and vibrational properties. We investigate here by periodic density-functional theory (DFT) calculations we here investigate the Raman and IR spectra of 2D carbon crystals belonging to the family of graphdiynes (GDYs) and…
▽ More
Two-dimensional (2D) hybrid sp-sp2 carbon systems are an appealing subject for science and technology. For these materials, topology and structure significantly affect electronic and vibrational properties. We investigate here by periodic density-functional theory (DFT) calculations we here investigate the Raman and IR spectra of 2D carbon crystals belonging to the family of graphdiynes (GDYs) and having different structures and topologies. By joining DFT calculations with symmetry analysis, we assign the IR and Raman modes in the spectra of all the investigated systems. On this basis, we discuss how the modulation of the Raman and IR active bands depends on the different interactions between sp and sp2 domains. The symmetry-based classification allows identifying the marker bands sensitive to the different peculiar topologies. These results show the effectiveness of vibrational spectroscopy for the characterization of new nanostructures, deepening the knowledge of the subtle interactions that take place in these 2D materials.
△ Less
Submitted 6 May, 2022; v1 submitted 16 March, 2022;
originally announced March 2022.
-
Topology-dependent conjugation effects in graphdiyne molecular fragments
Authors:
Patrick Serafini,
Alberto Milani,
Matteo Tommasini,
Carlo E. Bottani,
Carlo S. Casari
Abstract:
Graphdiynes (GDYs) as two-dimensional carbon structures based on sp2 hybridized aromatic rings connected by sp-hybridized acetylenic linear links are gathering an increasing popularity, both for their peculiar properties and for the promising applications. In these materials, structural features affect the degree of pi-electron conjugation resulting in different electronic, optical and vibrational…
▽ More
Graphdiynes (GDYs) as two-dimensional carbon structures based on sp2 hybridized aromatic rings connected by sp-hybridized acetylenic linear links are gathering an increasing popularity, both for their peculiar properties and for the promising applications. In these materials, structural features affect the degree of pi-electron conjugation resulting in different electronic, optical and vibrational properties. In particular, how topology, connectivity between sp and sp2 domains and system size are related with the final properties is fundamental to understand structure-property relationships and to tailor the properties by proper structure design. By using a computational approach based on density functional theory calculations, we here investigate structure-property relations in a class of 1D and 2D GDY molecular fragments as building block models of extended structures. By analysing how the structure can modulate the pi-electron conjugation in these systems, HOMO-LUMO gap is found to depend on the peculiar topology and connections between linear sp domains and aromatic units. A topological indicator is computed, showing a trend with the gap and with the frequency of the main vibrational mode occurring in Raman spectra. Our findings can contribute to guide the molecular design of new GDY-based sp-sp2 carbon materials, aiming at tuning their properties by precise control of the structure.
△ Less
Submitted 2 August, 2021; v1 submitted 9 January, 2021;
originally announced January 2021.
-
Boron films produced by high energy Pulsed Laser Deposition
Authors:
David Dellasega,
Valeria Russo,
Andrea Pezzoli,
Claudia Conti,
Nora Lecis,
Edoardo Besozzi,
Marco Beghi,
Carlo E. Bottani,
Matteo Passoni
Abstract:
Micron-thick boron films have been deposited by Pulsed Laser Deposition in vacuum on several substrates at room temperature. The use of high energy pulses (>700 mJ) results in the deposition of smooth coatings with low oxygen uptake even at base pressures of 10$^{-4}$ - 10$^{-3}$ Pa. A detailed structural analysis, by X-Ray Diffraction and Raman, allowed to assess the amorphous nature of the depos…
▽ More
Micron-thick boron films have been deposited by Pulsed Laser Deposition in vacuum on several substrates at room temperature. The use of high energy pulses (>700 mJ) results in the deposition of smooth coatings with low oxygen uptake even at base pressures of 10$^{-4}$ - 10$^{-3}$ Pa. A detailed structural analysis, by X-Ray Diffraction and Raman, allowed to assess the amorphous nature of the deposited films as well as to determine the base pressure that prevents boron oxide formation. In addition the crystallization dynamics has been characterized showing that film crystallinity already improves at relatively low temperatures (800 °C). Elastic properties of the boron films have been determined by Brillouin spectroscopy. Finally, micro-hardness tests have been used to explore cohesion and hardness of B films deposited on aluminum, silicon and alumina. The reported deposition strategy allows the growth of reliable boron coatings paving the way for their use in many technology fields.
△ Less
Submitted 20 October, 2017; v1 submitted 19 October, 2017;
originally announced October 2017.
-
Anisotropic Effects of Oxygen Vacancies on Electrochromic Properties and Conductivity of $γ$-Monoclinic WO$_3$
Authors:
Matteo Gerosa,
Cristiana Di Valentin,
Giovanni Onida,
Carlo Enrico Bottani,
Gianfranco Pacchioni
Abstract:
Tungsten trioxide (WO$_3$) is a paradigmatic electrochromic material, whose peculiar optical properties in the presence of oxygen vacancies or intercalated alkali atoms have been observed and investigated for a long time. In this paper we propose a rationalization of experiments based on first-principles calculations of optical and electrical properties of oxygen deficient (reduced) WO$_3$. Our ap…
▽ More
Tungsten trioxide (WO$_3$) is a paradigmatic electrochromic material, whose peculiar optical properties in the presence of oxygen vacancies or intercalated alkali atoms have been observed and investigated for a long time. In this paper we propose a rationalization of experiments based on first-principles calculations of optical and electrical properties of oxygen deficient (reduced) WO$_3$. Our approach is based on a parameter-free dielectric-dependent hybrid density functional methodology, used in combination with the charge transition levels formalism, for studying excitation mechanisms in the presence of defects. Our results indicate that oxygen vacancies lead to a different physics in $γ$-monoclinic WO$_3$, depending on the orientation of the W-O-W chain where the vacancy is created, thus evidencing strong anisotropic effects rooted in the peculiar structural properties of the original nondefective monoclinic cell. Different types of oxygen vacancies can hence be classified on the basis of the calculated ground state properties, electronic structure, and excitation/emission energies, giving a satisfactory explanation to a range of experimental observations made on oxygen deficient WO$_3$.
△ Less
Submitted 5 May, 2016;
originally announced May 2016.
-
Defect calculations in semiconductors through a dielectric-dependent hybrid DFT functional: the case of oxygen vacancies in metal oxides
Authors:
Matteo Gerosa,
Carlo Enrico Bottani,
Lucia Caramella,
Giovanni Onida,
Cristiana Di Valentin,
Gianfranco Pacchioni
Abstract:
We investigate the behavior of oxygen vacancies in three different metal-oxide semiconductors (rutile and anatase TiO2, monoclinic WO3, and tetragonal ZrO2) using a recently proposed hybrid density-functional method in which the fraction of exact exchange is material-dependent but obtained ab initio in a self-consistent scheme. In particular, we calculate charge-transition levels relative to the o…
▽ More
We investigate the behavior of oxygen vacancies in three different metal-oxide semiconductors (rutile and anatase TiO2, monoclinic WO3, and tetragonal ZrO2) using a recently proposed hybrid density-functional method in which the fraction of exact exchange is material-dependent but obtained ab initio in a self-consistent scheme. In particular, we calculate charge-transition levels relative to the oxygen-vacancy defect and compare computed optical and thermal excitation/emission energies with the available experimental results, shedding light on the underlying excitation mechanisms and related materials properties. We find that this novel approach is able to reproduce not only ground-state properties and band structures of perfect bulk oxide materials, but also provides results consistent with the optical and electrical behavior observed in the corresponding substoichiometric defective systems.
△ Less
Submitted 13 September, 2015;
originally announced September 2015.
-
Communication: Hole localization in Al-doped quartz SiO2 within ab initio hybrid-functional DFT
Authors:
Matteo Gerosa,
Cristiana Di Valentin,
Carlo Enrico Bottani,
Giovanni Onida,
Gianfranco Pacchioni
Abstract:
We investigate the long-standing problem of the hole localization at the Al impurity in quartz SiO$_2$, using a relatively recent DFT hybrid-functional method in which the exchange fraction is obtained \emph{ab initio}, based on an analogy with the static many-body COHSEX approximation to the electron self-energy. As the amount of the admixed exact exchange in hybrid functionals has been shown to…
▽ More
We investigate the long-standing problem of the hole localization at the Al impurity in quartz SiO$_2$, using a relatively recent DFT hybrid-functional method in which the exchange fraction is obtained \emph{ab initio}, based on an analogy with the static many-body COHSEX approximation to the electron self-energy. As the amount of the admixed exact exchange in hybrid functionals has been shown to be determinant for properly capturing the hole localization, this problem constitutes a prototypical benchmark for the accuracy of the method, allowing one to assess to what extent self-interaction effects are avoided. We obtain good results in terms of description of the charge localization and structural distortion around the Al center, improving with respect to the more popular B3LYP hybrid-functional approach. We also discuss the accuracy of computed hyperfine parameters, by comparison with previous calculations based on other self-interaction-free methods, as well as experimental values. We discuss and rationalize the limitations of our approach in computing defect-related excitation energies in low-dielectric-constant insulators.
△ Less
Submitted 7 October, 2015; v1 submitted 9 September, 2015;
originally announced September 2015.
-
Two-dimensional TiOx nanostructures on Au(111): a Scanning Tunneling Microscopy and Spectroscopy investigation
Authors:
F. Tumino,
P. Carrozzo,
L. Mascaretti,
C. S. Casari,
M. Passoni,
S. Tosoni,
C. E. Bottani,
A. Li Bassi
Abstract:
We investigated the growth of titanium oxide two-dimensional (2D) nanostructures on Au(111), produced by Ti evaporation and post-deposition oxidation. Scanning tunneling microscopy and spectroscopy (STM and STS) and low-energy electron diffraction (LEED) measurements characterized the morphological, structural and electronic properties of the observed structures. Five distinct TiO\sub{x} phases we…
▽ More
We investigated the growth of titanium oxide two-dimensional (2D) nanostructures on Au(111), produced by Ti evaporation and post-deposition oxidation. Scanning tunneling microscopy and spectroscopy (STM and STS) and low-energy electron diffraction (LEED) measurements characterized the morphological, structural and electronic properties of the observed structures. Five distinct TiO\sub{x} phases were identified: the \emph{honeycomb} and \emph{pinwheel} phases appear as monolayer films wetting the gold surface, while nanocrystallites of the \emph{triangular}, \emph{row} and \emph{needle} phases grow mainly over the honeycomb or pinwheel layers. Density Functional Theory (DFT) investigation of the honeycomb structure supports a $(2\times 2)$ structural model based on a Ti-O bilayer having $\text{Ti}_2\text{O}_3$ stoichiometry. The pinwheel phase was observed to evolve, for increasing coverage, from single triangular crystallites to a well-ordered film forming a $(4\sqrt{7}\times 4\sqrt{7})R19.1^\circ$ superstructure, which can be interpreted within a moirÃ\c{opyright}-like model. Structural characteristics of the other three phases were disclosed from the analysis of high-resolution STM measurements. STS measurements revealed a partial metallization of honeycomb and pinwheel and a semiconducting character of row and triangular phases.
△ Less
Submitted 8 September, 2015;
originally announced September 2015.
-
Electronic structure and phase stability of oxide semiconductors: Performance of dielectric-dependent hybrid functional DFT, benchmarked against $GW$ band structure calculations and experiments
Authors:
Matteo Gerosa,
Carlo Enrico Bottani,
Lucia Caramella,
Giovanni Onida,
Cristiana Di Valentin,
Gianfranco Pacchioni
Abstract:
We investigate band gaps, equilibrium structures, and phase stabilities of several bulk polymorphs of wide-gap oxide semiconductors ZnO, TiO2,ZrO2, and WO3. We are particularly concerned with assessing the performance of hybrid functionals built with the fraction of Hartree-Fock exact exchange obtained from the computed electronic dielectric constant of the material. We provide comparison with mor…
▽ More
We investigate band gaps, equilibrium structures, and phase stabilities of several bulk polymorphs of wide-gap oxide semiconductors ZnO, TiO2,ZrO2, and WO3. We are particularly concerned with assessing the performance of hybrid functionals built with the fraction of Hartree-Fock exact exchange obtained from the computed electronic dielectric constant of the material. We provide comparison with more standard density-functional theory and GW methods. We finally analyze the chemical reduction of TiO2 into Ti2O3, involving a change in oxide stoichiometry. We show that the dielectric-dependent hybrid functional is generally good at reproducing both ground-state (lattice constants, phase stability sequences, and reaction energies) and excited-state (photoemission gaps) properties within a single, fully ab initio framework.
△ Less
Submitted 11 August, 2015; v1 submitted 10 August, 2015;
originally announced August 2015.
-
Multiple light scattering and near-field effects in a fractal tree-like ensamble of dielectric nanoparticles
Authors:
Matteo Gerosa,
Carlo Enrico Bottani
Abstract:
We numerically study light scattering and absorption in self-similar aggregates of dielectric nanoparticles, as generated by simulated ballistic deposition upon a surface starting from a single seed particle. The resulting structure exhibits a complex tree-like shape, intended to mimic the morphologic properties of building blocks of real nanostructured thin films produced by means of fine control…
▽ More
We numerically study light scattering and absorption in self-similar aggregates of dielectric nanoparticles, as generated by simulated ballistic deposition upon a surface starting from a single seed particle. The resulting structure exhibits a complex tree-like shape, intended to mimic the morphologic properties of building blocks of real nanostructured thin films produced by means of fine controlled physical deposition processes employed in nanotechnology. The relationship of scattering and absorption cross sections to morphology is investigated within a computational scheme which thoroughly takes into account both multiple scattering and near-field effects. Numerical results are compared with a pre-existing single scattering limited analytical treatment of light scattering in fractal aggregates of small dielectric particles.
△ Less
Submitted 14 May, 2013;
originally announced May 2013.
-
Direct observation of the basic mechanisms of Pd island nucleation on Au(111)
Authors:
C. S. Casari,
S. Foglio,
F. Siviero,
A. Li Bassi,
M. Passoni,
C. E. Bottani
Abstract:
The formation mechanisms of evaporated Pd islands on the reconstructed Au(111) $22 /times /sqrt{3}$ herringbone surface have been here studied by Scanning Tunneling Microscopy (STM) at room temperature. Atomically resolved STM images at the very early stages of growth provide a direct observation of the mechanisms involved in preferential Pd islands nucleation at the elbows of the herringbone st…
▽ More
The formation mechanisms of evaporated Pd islands on the reconstructed Au(111) $22 /times /sqrt{3}$ herringbone surface have been here studied by Scanning Tunneling Microscopy (STM) at room temperature. Atomically resolved STM images at the very early stages of growth provide a direct observation of the mechanisms involved in preferential Pd islands nucleation at the elbows of the herringbone structure. At low Pd coverage the Au(111) herringbone structure remains substantially unperturbed and isolated Pd atoms settled in hollow sites between Au atoms are found nearby the elbows and the distortions of the reconstructed surface. In the same regions, at extremely low coverage (0.003 ML), substituted Pd atoms in lattice sites of the Au(111) surface are also observed, revealing the occurrence of a place exchange mechanism. Substitution seems to play a fundamental role in the nucleation process, forming aggregation centers for incoming atoms and thus leading to the ordered growth of Pd islands on Au(111). Atomically resolved STM images of Pd islands reveal a close-packed arrangement with lattice parameter close to the interatomic distance between gold atoms in the fcc regions of the Au(111) surface. Distortion of the herringbone structure for Pd coverages higher than 0.25 ML indicates strong interaction between the growing islands and the topmost Au(111) layer.
△ Less
Submitted 22 September, 2009; v1 submitted 19 November, 2008;
originally announced November 2008.
-
Hierarchically organized nanostructured TiO2 for photocatalysis applications
Authors:
F. Di Fonzo,
C. S. Casari,
V. Russo,
M. F. Brunella,
A. Li Bassi,
C. E. Bottani
Abstract:
A template-free process for the synthesis of nanocrystalline TiO2 hierarchical microstructures by reactive Pulsed Laser Deposition (PLD) is here presented. By a proper choice of deposition parameters a fine control over the morphology of TiO2 microstructures is demonstrated, going from classical compact/columnar films to a dense forest of distinct hierarchical assemblies of ultrafine nanoparticl…
▽ More
A template-free process for the synthesis of nanocrystalline TiO2 hierarchical microstructures by reactive Pulsed Laser Deposition (PLD) is here presented. By a proper choice of deposition parameters a fine control over the morphology of TiO2 microstructures is demonstrated, going from classical compact/columnar films to a dense forest of distinct hierarchical assemblies of ultrafine nanoparticles (<10 nm), up to a more disordered, aerogel-type structure. Correspondingly, film density varies with respect to bulk TiO2 anatase, with a degree of porosity going from 48% to over 90%. These structures are stable with respect to heat treatment at 400 centigrade degrees, which results in crystalline ordering but not in morphological changes down to the nanoscale. Both as deposited and annealed films exhibit very promising photocatalytic properties, even superior to standard Degussa P25 powder, as demonstrated by the degradation of stearic acid as a model molecule. The observed kinetics are correlated to the peculiar morphology of the PLD grown material. We show that the 3D multi-scale hierarchical morphology enhances reaction kinetics and creates an ideal environment for mass transport and photon absorption, maximizing the surface area-to-volume ratio while at the same time providing readily accessible porosity through the large inter-tree spaces that act as distributing channels. The reported strategy provides a versatile technique to fabricate high aspect ratio 3D titania microstuctures through a hierarchical assembly of ultrafine nanoparticles. Beyond photocatalytic and catalytic applications, this kind of material could be of interest for those applications where high surface-to-volume and efficient mass transport are required at the same time.
△ Less
Submitted 4 November, 2008;
originally announced November 2008.
-
Au-Ag template stripped pattern for scanning probe investigations of DNA arrays produced by Dip Pen Nanolithography
Authors:
Andrea Baserga,
Marco Vigano',
Carlo S. Casari,
Stefano Turri,
Andrea Li Bassi,
Marinella Levi,
Carlo E. Bottani
Abstract:
We report on DNA arrays produced by Dip Pen Nanolithography (DPN) on a novel Au-Ag micro patterned template stripped surface. DNA arrays have been investigated by atomic force microscopy (AFM) and scanning tunnelling microscopy (STM) showing that the patterned template stripped substrate enables easy retrieval of the DPN-functionalized zone with a standard optical microscope permitting a multi-i…
▽ More
We report on DNA arrays produced by Dip Pen Nanolithography (DPN) on a novel Au-Ag micro patterned template stripped surface. DNA arrays have been investigated by atomic force microscopy (AFM) and scanning tunnelling microscopy (STM) showing that the patterned template stripped substrate enables easy retrieval of the DPN-functionalized zone with a standard optical microscope permitting a multi-instrument and multi-technique local detection and analysis. Moreover the smooth surface of the Au squares (abput 5-10 angstrom roughness) allows to be sensitive to the hybridization of the oligonucleotide array with label-free target DNA. Our Au-Ag substrates, combining the retrieving capabilities of the patterned surface with the smoothness of the template stripped technique, are candidates for the investigation of DPN nanostructures and for the development of label free detection methods for DNA nanoarrays based on the use of scanning probes.
△ Less
Submitted 15 September, 2008;
originally announced September 2008.
-
Investigation of sp carbon chain interaction with silver nanoparticles by Surface Enhanced Raman Scattering
Authors:
A. Lucotti,
C. S. Casari,
M. Tommasini,
A. Li Bassi,
D. Fazzi,
V. Russo,
M. Del Zoppo,
C. Castiglioni,
F. Cataldo,
C. E. Bottani,
G. Zerbi
Abstract:
Surface Enhanced Raman Spectroscopy (SERS) is exploited here to investigate the interaction of isolated sp carbon chains (polyynes) in a methanol solution with silver nanoparticles. Hydrogen-terminated polyynes show a strong interaction with silver colloids used as the SERS active medium revealing a chemical SERS effect. SERS spectra after mixing polyynes with silver colloids show a noticeable t…
▽ More
Surface Enhanced Raman Spectroscopy (SERS) is exploited here to investigate the interaction of isolated sp carbon chains (polyynes) in a methanol solution with silver nanoparticles. Hydrogen-terminated polyynes show a strong interaction with silver colloids used as the SERS active medium revealing a chemical SERS effect. SERS spectra after mixing polyynes with silver colloids show a noticeable time evolution. Experimental results, supported by density functional theory (DFT) calculations of the Raman modes, allow us to investigate the behavior and stability of polyynes of different lengths and the overall sp conversion towards sp2 phase.
△ Less
Submitted 22 September, 2009; v1 submitted 28 March, 2008;
originally announced March 2008.
-
Low-frequency modes in the Raman spectrum of sp-sp2 nanostructured carbon
Authors:
C. S. Casari,
A. Li Bassi,
A. Baserga,
L. Ravagnan,
P. Piseri,
C. Lenardi,
M. Tommasini,
A. Milani,
D. Fazzi,
C. E. Bottani,
P. Milani
Abstract:
A novel form of amorphous carbon with sp-sp2 hybridization has been recently produced by supersonic cluster beam deposition showing the presence in the film of both polyynic and cumulenic species [L. Ravagnan et al. Phys. Rev. Lett. 98, 216103 (2007)]. Here we present a in situ Raman characterization of the low frequency vibrational region (400-800 cm-1) of sp-sp2 films at different temperatures…
▽ More
A novel form of amorphous carbon with sp-sp2 hybridization has been recently produced by supersonic cluster beam deposition showing the presence in the film of both polyynic and cumulenic species [L. Ravagnan et al. Phys. Rev. Lett. 98, 216103 (2007)]. Here we present a in situ Raman characterization of the low frequency vibrational region (400-800 cm-1) of sp-sp2 films at different temperatures. We report the presence of two peaks at 450 cm-1 and 720 cm-1. The lower frequency peak shows an evolution with the variation of the sp content and it can be attributed, with the support of density functional theory (DFT) simulations, to bending modes of sp linear structures. The peak at 720 cm-1 does not vary with the sp content and it can be attributed to a feature in the vibrational density of states activated by the disorder of the sp2 phase.
△ Less
Submitted 27 March, 2008;
originally announced March 2008.
-
Bulk Cr tips for scanning tunneling microscopy and spin-polarized scanning tunneling microscopy
Authors:
A. Li Bassi,
C. S. Casari,
D. Cattaneo,
F. Donati,
S. Foglio,
M. Passoni,
C. E. Bottani,
P. Biagioni,
A. Brambilla,
M. Finazzi,
F. Ciccacci,
L. Duo'
Abstract:
A simple, reliable method for preparation of bulk Cr tips for Scanning Tunneling Microscopy (STM) is proposed and its potentialities in performing high-quality and high-resolution STM and Spin Polarized-STM (SP-STM) are investigated. Cr tips show atomic resolution on ordered surfaces. Contrary to what happens with conventional W tips, rest atoms of the Si(111)-7x7 reconstruction can be routinely…
▽ More
A simple, reliable method for preparation of bulk Cr tips for Scanning Tunneling Microscopy (STM) is proposed and its potentialities in performing high-quality and high-resolution STM and Spin Polarized-STM (SP-STM) are investigated. Cr tips show atomic resolution on ordered surfaces. Contrary to what happens with conventional W tips, rest atoms of the Si(111)-7x7 reconstruction can be routinely observed, probably due to a different electronic structure of the tip apex. SP-STM measurements of the Cr(001) surface showing magnetic contrast are reported. Our results reveal that the peculiar properties of these tips can be suited in a number of STM experimental situations.
△ Less
Submitted 29 October, 2007; v1 submitted 17 September, 2007;
originally announced September 2007.
-
Influence of cumulenic chains on the vibrational and electronic properties of sp/sp2 amorphous carbon
Authors:
L. Ravagnan,
P. Piseri,
M. Bruzzi,
S. Miglio,
G. Bongiorno,
A. Baserga,
C. S. Casari,
A. Li Bassi,
C. Lenardi,
Y. Yamaguchi,
T. Wakabayashi,
C. E. Bottani,
P. Milani
Abstract:
We report the production and characterization of a form of amorphous carbon films with sp/sp2 hybridization (atomic fraction of sp hybridized species > 20%) where the predominant sp bonding appears to be (=C=C=)n cumulene. Vibrational and electronic properties have been studied by in situ Raman spectroscopy and electrical conductivity measurements. Cumulenic chains are substantially stable for t…
▽ More
We report the production and characterization of a form of amorphous carbon films with sp/sp2 hybridization (atomic fraction of sp hybridized species > 20%) where the predominant sp bonding appears to be (=C=C=)n cumulene. Vibrational and electronic properties have been studied by in situ Raman spectroscopy and electrical conductivity measurements. Cumulenic chains are substantially stable for temperatures lower than 250 K and they influence the electrical transport properties of the sp/sp2 carbon through a self-doping mechanism by pinning the Fermi level closer to one of the mobility gap edges. Upon heating above 250 K the cumulenic species decay to form graphitic nanodomains embedded in the sp2 amorphous matrix thus reducing the activation energy of the material. This is the first example of a pure carbon system where the sp hybridization influences bulk properties.
△ Less
Submitted 27 March, 2007;
originally announced March 2007.
-
Different W cluster deposition regimes in pulsed laser ablation observed by in situ Scanning Tunneling Microscopy
Authors:
D. Cattaneo,
S. Foglio,
C. S. Casari,
A. Li Bassi,
M. Passoni,
C. E. Bottani
Abstract:
We report on how different cluster deposition regimes can be obtained and observed by in situ Scanning Tunneling Microscopy (STM) by exploiting deposition parameters in a pulsed laser deposition (PLD) process. Tungsten clusters were produced by nanosecond Pulsed Laser Ablation in Ar atmosphere at different pressures and deposited on Au(111) and HOPG surfaces. Deposition regimes including cluster…
▽ More
We report on how different cluster deposition regimes can be obtained and observed by in situ Scanning Tunneling Microscopy (STM) by exploiting deposition parameters in a pulsed laser deposition (PLD) process. Tungsten clusters were produced by nanosecond Pulsed Laser Ablation in Ar atmosphere at different pressures and deposited on Au(111) and HOPG surfaces. Deposition regimes including cluster deposition-diffusion-aggregation (DDA), cluster melting and coalescence and cluster implantation were observed, depending on background gas pressure and target-to-substrate distance which influence the kinetic energy of the ablated species. These parameters can thus be easily employed for surface modification by cluster bombardment, deposition of supported clusters and growth of films with different morphologies. The variation in cluster mobility on different substrates and its influence on aggregation and growth mechanisms has also been investigated.
△ Less
Submitted 20 February, 2007;
originally announced February 2007.
-
Stabilization of linear carbon structures in a solid Ag nanoparticle assembly
Authors:
C. S. Casari,
V. Russo,
A. Li Bassi,
C. E. Bottani,
F. Cataldo,
A. Lucotti,
M. Tommasini,
M. Del Zoppo,
C. Castiglioni,
G. Zerbi
Abstract:
Linear sp carbon nanostructures are gathering interest for the physical properties of one-dimensional (1D) systems. At present, the main obstacle to the synthesis and study of these systems is their instability. Here we present a simple method to obtain a solid system where linear sp chains (i.e. polyynes) in a silver nanoparticle assembly display a long term stability at ambient conditions. The…
▽ More
Linear sp carbon nanostructures are gathering interest for the physical properties of one-dimensional (1D) systems. At present, the main obstacle to the synthesis and study of these systems is their instability. Here we present a simple method to obtain a solid system where linear sp chains (i.e. polyynes) in a silver nanoparticle assembly display a long term stability at ambient conditions. The presence and the behavior of linear carbon is investigated by Surface Enhanced Raman Scattering (SERS) exploiting the plasmon resonance of the silver nanoparticles assembly. This model system opens the possibility to investigate an intriguing form of carbon nanostructures.
△ Less
Submitted 3 October, 2006;
originally announced October 2006.
-
Leaving the Fullerene Road: Presence and Stability of sp Chains in sp2 Carbon Clusters and Cluster-Assembled Solids
Authors:
M. Bogana,
L. Ravagnan,
C. S. Casari,
A. Zivelonghi,
A. Baserga,
A. Li Bassi,
C. E. Bottani,
S. Vinati,
E. Salis,
P. Piseri,
E. Barborini,
L. Colombo,
P. Milani
Abstract:
We report the experimental and theoretical investigation of the growth and of the structure of large carbon clusters produced in a supersonic expansion by a pulsed microplasma source. The absence of a significant thermal annealing during the cluster growth causes the formation of disordered structures where sp2 and sp hybridizations coexist for particles larger than roughly 90 atoms. Among diffe…
▽ More
We report the experimental and theoretical investigation of the growth and of the structure of large carbon clusters produced in a supersonic expansion by a pulsed microplasma source. The absence of a significant thermal annealing during the cluster growth causes the formation of disordered structures where sp2 and sp hybridizations coexist for particles larger than roughly 90 atoms. Among different structures we recognize sp2 closed networks encaging sp chains. This "nutshell" configuration can prevent the fragmentation of sp species upon deposition of the clusters thus allowing the formation of nanostructured films containing carbynoid species, as shown by Raman spectroscopy. Atomistic simulations confirm that the observed Raman spectra are the signature of the sp/sp2 hybridization characteristic of the isolated clusters and surviving in the film and provide information about the structure of the sp chains. Endohedral sp chains in sp2 cages represent a novel way in which carbon nanostructures may be organized with potential interesting functional properties.
△ Less
Submitted 14 January, 2005;
originally announced January 2005.
-
Cluster Beam Deposition and in situ Characterization of Carbyne-rich Carbon Films
Authors:
L. Ravagnan,
F. Siviero,
C. Lenardi,
P. Piseri,
E. Barborini,
P. Milani,
C. Casari,
A. Li Bassi,
C. E. Bottani
Abstract:
Nanostructured carbon films produced by supersonic cluster beam deposition have been studied by in situ Raman spectroscopy. Raman spectra show the formation of a sp2 solid with a very large fraction of sp-coordinated carbyne species showing a long-term stability under ultra high vacuum. Distinct Raman contribution from polyyne and cumulene species have been observed. The long-term stability and…
▽ More
Nanostructured carbon films produced by supersonic cluster beam deposition have been studied by in situ Raman spectroscopy. Raman spectra show the formation of a sp2 solid with a very large fraction of sp-coordinated carbyne species showing a long-term stability under ultra high vacuum. Distinct Raman contribution from polyyne and cumulene species have been observed. The long-term stability and the behavior of carbyne-rich films under different gas exposure have been characterized showing different evolution for different sp configurations. Our experiments confirm theoretical predictions and demonstrate the possibility of easily producing a stable carbyne-rich pure carbon solid. The stability of the sp2-sp network has important implications for astrophysics and for the production of novel carbon-based systems.
△ Less
Submitted 13 September, 2002;
originally announced September 2002.
