-
Reconciling the theoretical and experimental electronic structure of NbO2
Authors:
Samuel Berman,
Ainur Zhussupbekova,
Jos E. Boschker,
Jutta Schwarzkopf,
David D. O'Regan,
Igor V. Shvets,
Kuanysh Zhussupbekov
Abstract:
Metal-insulator transition materials such as NbO2 have generated much excitement in recent years for their potential applications in computing and sensing. NbO2 has generated considerable debate over the nature of the phase transition, and the values for the band gap/band widths in the insulating phase. We present a combined theoretical and experimental study of the band gap and electronic structu…
▽ More
Metal-insulator transition materials such as NbO2 have generated much excitement in recent years for their potential applications in computing and sensing. NbO2 has generated considerable debate over the nature of the phase transition, and the values for the band gap/band widths in the insulating phase. We present a combined theoretical and experimental study of the band gap and electronic structure of the insulating phase of NbO2. We carry out ab-initio density functional theory plus U calculations, directly determining U and J parameters for both the Nb 4d and O 2p subspaces through the recently introduced minimum-tracking linear response method. We find a fundamental bulk band gap of 0.80 eV for the full DFT+U+J theory. We also perform calculations and measurements for a (100) oriented thin film. Scanning tunnelling spectroscopy measurements show that the surface band gap varies from 0.75 eV to 1.35 eV due to an excess of oxygen in and near the surface region of the film. Slab calculations indicate metallicity localised at the surface region caused by an energy level shift consistent with a reduction in Coulomb repulsion. We demonstrate that this effect in combination with the simple, low cost DFT+U+J method can account for the band widths and p-d gap observed in X-ray photoelectron spectroscopy experiments. Overall, our results indicate the possible presence of a 2D anisotropic metallic layer at the (100) surface of NbO2.
△ Less
Submitted 2 November, 2023;
originally announced November 2023.
-
Cooperative Effects of Strain and Electron Correlation in Epitaxial VO2 and NbO2
Authors:
Wei-Cheng Lee,
Matthew J. Wahila,
Shantanu Mukherjee,
Christopher N. Singh,
Tyler Eustance,
Anna Regoutz,
H. Paik,
Jos E. Boschker,
Fanny Rodolakis,
Tien-Lin Lee,
D. G. Schlom,
Louis F. J. Piper
Abstract:
We investigate the electronic structure of the epitaxial VO$_2$ films in the rutile phase using the density functional theory combined with the slave spin method (DFT+SS). In DFT-SS, the multiorbital Hubbard interactions are added to a DFT-fit tight-binding model, and we employ the slave-spin method to treat the electron correlation. We find that while stretching the system along the rutile $c$-ax…
▽ More
We investigate the electronic structure of the epitaxial VO$_2$ films in the rutile phase using the density functional theory combined with the slave spin method (DFT+SS). In DFT-SS, the multiorbital Hubbard interactions are added to a DFT-fit tight-binding model, and we employ the slave-spin method to treat the electron correlation. We find that while stretching the system along the rutile $c$-axis results in a band structure favoring an anisotropic orbital fillings, the electron correlation favors an equal electron filling among $t_{2g}$ orbitals. These two distinct effects cooperatively induce interesting orbital-dependent redistributions of the electron occupations and the spectral weights, which pushes the strained VO$_2$ toward an orbital selective Mott transition (OSMT). The simulated single-particle spectral functions are directly compared to V L-edge resonant X-ray photoemission spectroscopy of epitaxial 10 nm VO$_2$/TiO$_2$ (001) and (100) strain orientations. Excellent agreement is observed between the simulations and experimental data regarding the strain-induced evolution of the lower Hubbard band. Simulations of rutile NbO$_2$ under similar strain conditions as VO$_2$ are performed, and we predict that OSMT will not occur in rutile NbO$_2$. Our results indicates that the electron correlation in VO$_2$ is important and can be modulated even in the rutile phase before the Peierls instability sets in.
△ Less
Submitted 27 February, 2019; v1 submitted 21 August, 2018;
originally announced August 2018.
-
Exploring the subsurface atomic structure of the epitaxially grown phase change material Ge$_2$Sb$_2$Te$_5$
Authors:
J. Kellner,
G. Bihlmayer,
V. L. Deringer,
M. Liebmann,
C. Pauly,
A. Giussani,
J. E. Boschker,
R. Calarco,
R. Dronskowski,
M. Morgenstern
Abstract:
Scanning tunneling microscopy (STM) and spectroscopy (STS) in combination with density functional theory (DFT) calculations are employed to study the surface and subsurface properties of the metastable phase of the phase change material Ge$_{2}$Sb$_{2}$Te$_{5}$ as grown by molecular beam epitaxy. The (111) surface is covered by an intact Te layer, which nevertheless allows to detect the more disor…
▽ More
Scanning tunneling microscopy (STM) and spectroscopy (STS) in combination with density functional theory (DFT) calculations are employed to study the surface and subsurface properties of the metastable phase of the phase change material Ge$_{2}$Sb$_{2}$Te$_{5}$ as grown by molecular beam epitaxy. The (111) surface is covered by an intact Te layer, which nevertheless allows to detect the more disordered subsurface layer made of Ge and Sb atoms. Centrally, we find that the subsurface layer is significantly more ordered than expected for metastable Ge$_{2}$Sb$_{2}$Te$_{5}$. Firstly, we show that vacancies are nearly absent within the subsurface layer. Secondly, the potential fluctuation, tracked by the spatial variation of the valence band onset, is significantly less than expected for a random distribution of atoms and vacancies in the subsurface layer. The strength of the fluctuation is compatible with the potential distribution of charged acceptors without being influenced by other types of defects. Thirdly, DFT calculations predict a partially tetrahedral Ge bonding within a disordered subsurface layer, exhibiting a clear fingerprint in the local density of states as a peak close to the conduction band onset. This peak is absent in the STS data implying the absence of tetrahedral Ge, which is likely due to the missing vacancies required for structural relaxation around the shorter tetrahedral Ge bonds. Finally, isolated defect configurations with a low density of $~10^{-4}$/nm$^2$ are identified by comparison of STM and DFT data, which corroborates the significantly improved order in the epitaxial films driven by the build-up of vacancy layers.
△ Less
Submitted 27 September, 2017;
originally announced September 2017.
-
Mapping the band structure of GeSbTe phase change alloys around the Fermi level
Authors:
Jens Kellner,
Gustav Bihlmayer,
Marcus Liebmann,
Sebastian Otto,
Christian Pauly,
Jos Emiel Boschker,
Valeria Bragaglia,
Stefano Cecchi,
Rui Ning Wang,
Volker L. Deringer,
Philipp Küppers,
Priyamvada Bhaskar,
Evangelos Golias,
Jaime Sánchez-Barriga,
Richard Dronskowski,
Thomas Fauster,
Oliver Rader,
Raffaella Calarco,
Markus Morgenstern
Abstract:
Phase change alloys are used for non-volatile random access memories exploiting the conductivity contrast between amorphous and metastable, crystalline phase. However, this contrast has never been directly related to the electronic band structure. Here, we employ photoelectron spectroscopy to map the relevant bands for metastable, epitaxial GeSbTe films. The constant energy surfaces of the valence…
▽ More
Phase change alloys are used for non-volatile random access memories exploiting the conductivity contrast between amorphous and metastable, crystalline phase. However, this contrast has never been directly related to the electronic band structure. Here, we employ photoelectron spectroscopy to map the relevant bands for metastable, epitaxial GeSbTe films. The constant energy surfaces of the valence band close to the Fermi level are hexagonal tubes with little dispersion perpendicular to the (111) surface. The electron density responsible for transport belongs to the tails of this bulk valence band, which is broadened by disorder, i.e., the Fermi level is 100 meV above the valence band maximum. This result is consistent with transport data of such films in terms of charge carrier density and scattering time. In addition, we find a state in the bulk band gap with linear dispersion, which might be of topological origin.
△ Less
Submitted 17 January, 2018; v1 submitted 29 August, 2017;
originally announced August 2017.
-
Spin Mapping of Surface and Bulk Rashba States in Ferroelectric a-GeTe(111) Films
Authors:
H. J. Elmers,
R. Wallauer,
M. Liebmann,
J. Kellner,
M. Morgenstern,
R. N. Wang,
J. E. Boschker,
R. Calarco,
O. Rader,
D. Kutnyakhov,
S. V. Chernov,
K. Medjanik,
C. Tusche,
M. Ellguth,
H. Volfova,
J. Braun,
J. Minar,
H. Ebert,
G. Schonhense
Abstract:
A comprehensive mapping of the spin polarization of the electronic bands in ferroelectric a-GeTe(111) films has been performed using a time-of-flight momentum microscope equipped with an imaging spin filter that enables a simultaneous measurement of more than 10.000 data points (voxels). A Rashba type splitting of both surface and bulk bands with opposite spin helicity of the inner and outer Rashb…
▽ More
A comprehensive mapping of the spin polarization of the electronic bands in ferroelectric a-GeTe(111) films has been performed using a time-of-flight momentum microscope equipped with an imaging spin filter that enables a simultaneous measurement of more than 10.000 data points (voxels). A Rashba type splitting of both surface and bulk bands with opposite spin helicity of the inner and outer Rashba bands is found revealing a complex spin texture at the Fermi energy. The switchable inner electric field of GeTe implies new functionalities for spintronic devices.
△ Less
Submitted 4 December, 2015;
originally announced December 2015.
-
Point contact investigations of film and interface magnetoresistance of La$_{0.7}$Sr$_{0.3}$MnO$_3$ heterostructures on Nb:SrTiO$_{3}$
Authors:
Asmund Monsen,
Jos E. Boschker,
Per Nordblad,
Roland Mathieu,
Thomas Tybell,
Erik Wahlström
Abstract:
STM based magnetotransport measurements of epitaxial La$_{0.7}$Sr$_{0.3}$MnO$_3$ 32 nm thick films with and without an internal LaMnO$_3$ layer (0-8 nm thick) grown on Nb doped SrTiO$_3$ are presented. The measurements reveal two types of low field magnetoresistance (LFMR) with a magnitude of $\sim 0.1-1.5\%$. One LFMR contribution is identified as a conventional grain boundary/domain wall scatter…
▽ More
STM based magnetotransport measurements of epitaxial La$_{0.7}$Sr$_{0.3}$MnO$_3$ 32 nm thick films with and without an internal LaMnO$_3$ layer (0-8 nm thick) grown on Nb doped SrTiO$_3$ are presented. The measurements reveal two types of low field magnetoresistance (LFMR) with a magnitude of $\sim 0.1-1.5\%$. One LFMR contribution is identified as a conventional grain boundary/domain wall scattering through the symmetric I-V characteristics, high dependence on tip placements and insensitivity to introduction of LaMnO$_3$ layers. The other contribution originates from the reverse biased Nb doped SrTiO$_3$ interface and the interface layer of La$_{0.7}$Sr$_{0.3}$MnO$_3$. Both LFMR contributions display a field dependence indicative of a higher coercivity ($\sim$200 Oe) than the bulk film. LaMnO$_3$ layers are found to reduce the rectifying properties of the junctions, and sub micron lateral patterning by electron beam lithography enhances the diodic properties, in accordance with a proposed transport model based on the locality of the injected current.
△ Less
Submitted 24 August, 2014;
originally announced August 2014.
-
Thickness dependence of dynamic and static magnetic properties of pulsed laser deposited La$_{0.7}$Sr$_{0.3}$MnO$_3$ films on SrTiO$_3$(001)
Authors:
Åsmund Monsen,
Jos E. Boschker,
Ferran Macià,
Justin W. Wells,
Per Nordblad,
Andrew D. Kent,
Roland Mathieu,
Thomas Tybell,
Erik Wahlström
Abstract:
We present a comprehensive study of the thickness dependence of static and magneto-dynamic magnetic properties of La$_{0.7}$Sr$_{0.3}$MnO$_3$. Epitaxial pulsed laser deposited La$_{0.7}$Sr$_{0.3}$MnO$_3$ / SrTiO$_3$(001) thin films in the range from 3 unit cells (uc) to 40 uc (1.2 - 16 nm) have been investigated through ferromagnetic resonance spectroscopy (FMR) and SQUID magnetometry at variable…
▽ More
We present a comprehensive study of the thickness dependence of static and magneto-dynamic magnetic properties of La$_{0.7}$Sr$_{0.3}$MnO$_3$. Epitaxial pulsed laser deposited La$_{0.7}$Sr$_{0.3}$MnO$_3$ / SrTiO$_3$(001) thin films in the range from 3 unit cells (uc) to 40 uc (1.2 - 16 nm) have been investigated through ferromagnetic resonance spectroscopy (FMR) and SQUID magnetometry at variable temperature. Magnetodynamically, three different thickness, $d$, regimes are identified: 20 uc $\lesssim d$ uc where the system is bulk like, a transition region 8 uc $\le d \lesssim 20$ uc where the FMR line width and position depend on thickness and $d=6$ uc which displays significantly altered magnetodynamic properties, while still displaying bulk magnetization. Magnetization and FMR measurements are consistent with a nonmagnetic volume corresponding to $\sim$ 4 uc. We observe a reduction of Curie temperature ($T_C$) with decreasing thickness, which is coherent with a mean field model description. The reduced ordering temperature also accounts for the thickness dependence of the magnetic anisotropy constants and resonance fields. The damping of the system is strongly thickness dependent, and is for thin films dominated by thickness dependent anisotropies, yielding both a strong 2-magnon scattering close to $T_c$ and a low temperature broadening. For the bulk like samples a large part of the broadening can be linked to spread in magnetic anisotropies attributed to crystal imperfections/domain boundaries of the bulk like film.
△ Less
Submitted 24 August, 2014;
originally announced August 2014.
-
3D nanostructuring of La0.7Sr0.3MnO3 thin film surfaces by scanning tunnelling microscopy
Authors:
Yun Liu,
Å. F. Monsen,
J. E. Boschker,
E. Wahlström,
A. Borg,
T. Tybell
Abstract:
Nanoscale 3D surface modifications, by scanning tunneling microscopy under ambient conditions, of La0.7Sr0.3MnO3 thin films have been performed. It was demonstrated that there are well defined combinations of bias voltages and scan speeds which allow for controlled surface structuring. Lateral structures with sizes down to 1.5 nm are possible to obtain. Moreover, it is possible to reproducibly c…
▽ More
Nanoscale 3D surface modifications, by scanning tunneling microscopy under ambient conditions, of La0.7Sr0.3MnO3 thin films have been performed. It was demonstrated that there are well defined combinations of bias voltages and scan speeds which allow for controlled surface structuring. Lateral structures with sizes down to 1.5 nm are possible to obtain. Moreover, it is possible to reproducibly control the depth of etching with half a unit cell precision, enabling design of 3D surface structures and control of the surface termination of La0.7Sr0.3MnO3 through etching.
△ Less
Submitted 1 June, 2010; v1 submitted 22 April, 2009;
originally announced April 2009.
