Showing 1–18 of 18 results for author: Boriskina, S V

Spatiotemporal Mapping of Anisotropic Thermal Transport in GaN Thin Films via Ultrafast X-ray Diffraction

Authors: Thanh Nguyen, Chuliang Fu, Mouyang Cheng, Buxuan Li, Tyra E. Espedal, Zhantao Chen, Kuan Qiao, Kumar Neeraj, Abhijatmedhi Chotrattanapituk, Denisse Cordova Carrizales, Eunbi Rha, Tongtong Liu, Shivam N. Kajale, Deblina Sarkar, Donald A. Walko, Haidan Wen, Svetlana V. Boriskina, Gang Chen, Jeehwan Kim, Mingda Li

Abstract: Efficient thermal management is essential for the reliability of modern power electronics, where increasing device density leads to severe heat dissipation challenges. However, in thin-film systems, thermal transport is often compromised by interfacial resistance and microscale defects introduced during synthesis or transfer, which are difficult to characterize using conventional techniques. Here… ▽ More Efficient thermal management is essential for the reliability of modern power electronics, where increasing device density leads to severe heat dissipation challenges. However, in thin-film systems, thermal transport is often compromised by interfacial resistance and microscale defects introduced during synthesis or transfer, which are difficult to characterize using conventional techniques. Here we present a non-contact, spatiotemporal-resolved ultrafast x-ray diffraction method to extract in-plane thermal conductivity and thermal boundary conductance, using GaN thin films on silicon as a model system. By tracking the pump-induced lattice strain, we reconstruct the lateral heat flow dynamics and quantitatively probe thermal transport near a wrinkle defect. We uncover pronounced asymmetric heat dissipation across the wrinkle, with a four-fold reduction in the local thermal conductivity near the wrinkle and a 25% drop in interfacial conductance. Our work demonstrates that ultrafast x-ray diffraction can serve as a precise thermal metrology tool for characterizing heat transport in multilayered thin-film structures for next-generation microelectronic devices. △ Less

Submitted 3 July, 2025; originally announced July 2025.

Comments: 24 pages, 4 figures

Thermal and dimensional stability of photocatalytic material ZnPS$_3$ under extreme environmental conditions

Authors: Abhishek Mukherjee, Vivian J. Santamaría-García, Damian Wlodarczyk, Ajeesh K. Somakumar, Piotr Sybilski, Ryan Siebenaller, Emmanuel Rowe, Saranya Narayanan, Michael A. Susner, L. Marcelo Lozano-Sanchez, Andrzej Suchocki, Julio L. Palma, Svetlana V. Boriskina

Abstract: Zinc phosphorus trisulfide (ZnPS$_3$), a promising material for photocatalysis and energy storage, is shown in this study to exhibit remarkable stability under extreme conditions. We explore its optical and structural properties under high pressure and cryogenic temperatures using photoluminescence (PL) spectroscopy, Raman scattering, and density functional theory (DFT). Our results identify a pre… ▽ More Zinc phosphorus trisulfide (ZnPS$_3$), a promising material for photocatalysis and energy storage, is shown in this study to exhibit remarkable stability under extreme conditions. We explore its optical and structural properties under high pressure and cryogenic temperatures using photoluminescence (PL) spectroscopy, Raman scattering, and density functional theory (DFT). Our results identify a pressure-induced phase transition starting at 6.75 GPa and stabilizing by 12.5 GPa, after which ZnPS$_3$ demonstrates robust stability across a broad pressure range of 15 to 100 GPa. DFT calculations predict a semiconductor-to-semimetal transition at 100 GPa, while PL measurements reveal defect-assisted emissions that quench under pressure due to enhanced non-radiative recombination. At cryogenic temperatures, PL quenching intensifies as non-radiative processes dominate, driven by a rising Grüneisen parameter and reduced phonon population. Cryogenic X-ray diffraction (XRD) also reveals a high mean thermal expansion coefficient (TEC) of (4.369 $\pm$ 0.393) $\times$ 10$^{-5}$ K$^{-1}$, among the highest reported for 2D materials. This unique combination of tunable electronic properties under low pressure and high thermal sensitivity makes ZnPS$_3$ a strong candidate for sensing applications in extreme environments. △ Less

Submitted 24 January, 2025; originally announced January 2025.

Defect-Induced Strain-Tunable Photoluminescence in AgScP$_2$S$_6$

Authors: Abhishek Mukherjee, Damian Wlodarczyk, Ajeesh K. Somakumar, Piotr Sybilski, Ryan Siebenaller, Michael A. Susner, Andrzej Suchocki, Svetlana V. Boriskina

Abstract: Metal thiophosphates (MTPs) are a large family of 2D materials that exhibit large structural and chemical diversity. They also show promise for applications in energy harvesting and photodetection. Strain and defect engineering have previously been demonstrated as useful mechanisms to tune several properties of MTPs such as resistivity, magnetic state, and electronic band gap. However, the effect… ▽ More Metal thiophosphates (MTPs) are a large family of 2D materials that exhibit large structural and chemical diversity. They also show promise for applications in energy harvesting and photodetection. Strain and defect engineering have previously been demonstrated as useful mechanisms to tune several properties of MTPs such as resistivity, magnetic state, and electronic band gap. However, the effect of these stimuli on engineering tunable light emission in MTPs remains unexplored. Here, we show experimentally that structural defects in metal thiophosphate AgScP$_2$S$_6$ are prominent in exhibiting photoluminescence, which is likely driven by the defect-state-to-conduction-band transitions and can be further tuned by temperature-induced strain gradients. △ Less

Submitted 3 March, 2024; originally announced March 2024.

Comments: 7 pages, 4 figures, 1 table

Plasmon Fizeau drag in 3D Dirac and Weyl semimetals

Authors: Morgan G. Blevins, Svetlana V. Boriskina

Abstract: There is a need for compact, dynamically tunable nonreciprocal optical elements to enable on-chip-compatible optical isolators and more efficient radiative energy transfer systems. Plasmon Fizeau drag, the drag of electrical current on propagating surface plasmon polaritons, has been proposed to induce nonreciprocal surface modes to enable one-way energy transport. However, relativistic electron d… ▽ More There is a need for compact, dynamically tunable nonreciprocal optical elements to enable on-chip-compatible optical isolators and more efficient radiative energy transfer systems. Plasmon Fizeau drag, the drag of electrical current on propagating surface plasmon polaritons, has been proposed to induce nonreciprocal surface modes to enable one-way energy transport. However, relativistic electron drift velocities are required to induce appreciable contrast between the dispersion characteristics of co-propagating and counter-propagating surface plasmon modes. The high electron drift velocity of graphene previously allowed for the experimental demonstration of current-induced nonreciprocity in a two-dimensional (2D) Dirac material. The high electron drift and Fermi velocities in three-dimensional (3D) Dirac materials make them ideal candidates for the effect, however, both the theory of the Fizeau drag effect and its experimental demonstrations in 3D Dirac materials are missing. Here we develop a comprehensive theory of Fizeau drag in DC-biased 3D Weyl semimetals (WSM) or Dirac semimetals (DSM), both under local and non-local approximation and with dissipative losses. We predict that under practical assumptions for loss, Fizeau drag in the DSM Cd$_3$As$_2$ opens windows of pseudo-unidirectional transport. We additionally introduce new figures of merit to rank nonreciprocal plasmonic systems by their potential for directional SPP transport. Further, we propose a new approach for achieving appreciable plasmonic Fizeau drag via optically pumping bulk inversion symmetry breaking WSMs or DSMs. △ Less

Submitted 13 February, 2024; v1 submitted 19 October, 2023; originally announced October 2023.

Journal ref: ACS Photonics (2024)

Sensitive singular-phase optical detection without phase measurements with Tamm plasmons

Authors: Svetlana V Boriskina, Yoichiro Tsurimaki

Abstract: Spectrally-tailored interactions of light with material interfaces offer many exciting applications in sensing, photo-detection, and optical energy conversion. In particular, complete suppression of light reflectance at select frequencies accompanied by sharp phase variations in the reflected signal forms the basis for the development of ultra-sensitive singular-phase optical detection schemes suc… ▽ More Spectrally-tailored interactions of light with material interfaces offer many exciting applications in sensing, photo-detection, and optical energy conversion. In particular, complete suppression of light reflectance at select frequencies accompanied by sharp phase variations in the reflected signal forms the basis for the development of ultra-sensitive singular-phase optical detection schemes such as Brewster and surface plasmon interferometry. However, both the Brewster effect and surface-plasmon-mediated absorption on planar interfaces are limited to one polarization of the incident light and oblique excitation angles, and may have limited bandwidth dictated by the material dielectric index and plasma frequency. To alleviate these limitations, we design narrow-band super-absorbers composed of plasmonic materials embedded into dielectric photonic nanostructures with topologically-protected interfacial Tamm plasmon states. These structures have planar geometry and do not require nanopatterning to achieve perfect absorption of both polarizations of the incident light in a wide range of incident angles, including the normal incidence. Their absorption lines are tunable across a very broad spectral range via engineering of the photon bandstructure of the dielectric photonic nanostructures to achieve reversal of the geometrical phase across the interface with the plasmonic absorber. We outline the design strategy to achieve perfect absorptance in Tamm structures with dissipative losses via conjugate impedance matching. We further demonstrate via modeling how these structures can be engineered to support sharp asymmetric amplitude resonances, which can be used to improve the sensitivity of optical sensors in the amplitude-only detection scheme that does not require use of bulky and expensive ellipsometry equipment. △ Less

Submitted 16 May, 2018; originally announced May 2018.

Comments: 19 pages, 9 figures

Journal ref: J. Phys.: Condens. Matter 30 224003, 2018

Engineering a Full Gamut of Structural Colors in All-Dielectric Mesoporous Network Metamaterials

Authors: Alejandra Ruiz-Clavijo, Yoichiro Tsurimaki, Olga Caballero-Calero, George Ni, Gang Chen, Svetlana V. Boriskina, Marisol Martin-Gonzalez

Abstract: Structural colors are a result of the scattering of certain frequencies of the incident light on micro- or nanoscale features in a material. This is a quite different phenomenon from that of colors produced by absorption of different frequencies of the visible spectrum by pigments or dyes, which is the most common way of coloring used in our daily life. However, structural colors are more robust a… ▽ More Structural colors are a result of the scattering of certain frequencies of the incident light on micro- or nanoscale features in a material. This is a quite different phenomenon from that of colors produced by absorption of different frequencies of the visible spectrum by pigments or dyes, which is the most common way of coloring used in our daily life. However, structural colors are more robust and can be engineered to span most of the visible spectrum without changing the base material, only its internal structure. They are abundant in nature, with examples as colorful as beetle shells and butterfly wings, but there are few ways of preparing them for large-scale commercial applications for real-world uses. In this work, we present a technique to create a full gamut of structural colors based on a low-cost, robust, and scalable fabrication of periodic network structures in porous alumina as well as the strategy to theoretically predict and engineer different colors on demand. We experimentally demonstrate mesoporous network metamaterial structures with engineered colors spanning the whole optical spectrum and discuss their applications in sensing, environmental monitoring, biomimetic tissues engineering, etc. △ Less

Submitted 16 May, 2018; originally announced May 2018.

Comments: 24 pages, 19 figures, manuscript text and supplementary information

Journal ref: ACS Photonics, 2018, DOI: 10.1021/acsphotonics.7b01569

Efficiency Limits of Solar Energy Harvesting via Internal Photoemission in Carbon Materials

Authors: Svetlana V. Boriskina, Jiawei Zhou, Zhiwei Ding, Gang Chen

Abstract: We describe strategies to estimate the upper limits of the efficiency of photon energy harvesting via hot electron extraction from gapless absorbers. Gapless materials such as noble metals can be used for harvesting the whole solar spectrum, including visible and near-infrared light. The energy of photo-generated non-equilibrium or hot charge carriers can be harvested before they thermalize with t… ▽ More We describe strategies to estimate the upper limits of the efficiency of photon energy harvesting via hot electron extraction from gapless absorbers. Gapless materials such as noble metals can be used for harvesting the whole solar spectrum, including visible and near-infrared light. The energy of photo-generated non-equilibrium or hot charge carriers can be harvested before they thermalize with the crystal lattice via the process of their internal photo-emission (IPE) through the rectifying Schottky junction with a semiconductor. However, the low efficiency and the high cost of noble metals necessitates the search for cheaper abundant alternative materials, and we show here that carbon can serve as a promising IPE material candidate. We compare the upper limits of performance of IPE photon energy-harvesting platforms, which incorporate either gold or carbon as the photoactive material where hot electrons are generated. Through a combination of density functional theory, joint electron density of states calculations, and Schottky diode efficiency modeling, we show that the material electron band structure imposes a strict upper limit on the achievable efficiency of the IPE devices. Our calculations reveal that graphite is a good material candidate for the IPE absorber for harvesting visible and near-infrared photons. Graphite electron density of states yields a sizeable population of hot electrons with energies high enough to be collected across the potential barrier. We also discuss the mechanisms that prevent the IPE device efficiency from reaching the upper limits imposed by their material electron band structures. The proposed approach is general and allows for efficient pre-screening of materials for their potential use in IPE energy converters and photodetectors within application-specific spectral windows. △ Less

Submitted 24 February, 2018; originally announced February 2018.

Comments: 17 pages, 6 figures

Journal ref: Photonics 2018, 5(1), 4

Losses in plasmonics: from mitigating energy dissipation to embracing loss-enabled functionalities

Authors: Svetlana V. Boriskina, Thomas Alan Cooper, Lingping Zeng, George Ni, Jonathan K. Tong, Yoichiro Tsurimaki, Yi Huang, Laureen Meroueh, Gerald Mahan, Gang Chen

Abstract: Unlike conventional optics, plasmonics enables unrivalled concentration of optical energy well beyond the diffraction limit of light. However, a significant part of this energy is dissipated as heat. Plasmonic losses present a major hurdle in the development of plasmonic devices and circuits that can compete with other mature technologies. Until recently, they have largely kept the use of plasmoni… ▽ More Unlike conventional optics, plasmonics enables unrivalled concentration of optical energy well beyond the diffraction limit of light. However, a significant part of this energy is dissipated as heat. Plasmonic losses present a major hurdle in the development of plasmonic devices and circuits that can compete with other mature technologies. Until recently, they have largely kept the use of plasmonics to a few niche areas where loss is not a key factor, such as surface enhanced Raman scattering and biochemical sensing. Here, we discuss the origin of plasmonic losses and various approaches to either minimize or mitigate them based on understanding of fundamental processes underlying surface plasmon modes excitation and decay. Along with the ongoing effort to find and synthesize better plasmonic materials, optical designs that modify the optical powerflow through plasmonic nanostructures can help in reducing both radiative damping and dissipative losses of surface plasmons. Another strategy relies on the development of hybrid photonic-plasmonic devices by coupling plasmonic nanostructures to resonant optical elements. Hybrid integration not only helps to reduce dissipative losses and radiative damping of surface plasmons, but also makes possible passive radiative cooling of nano-devices. Finally, we review emerging applications of thermoplasmonics that leverage Ohmic losses to achieve new enhanced functionalities. The most successful commercialized example of a loss-enabled novel application of plasmonics is heat-assisted magnetic recording. Other promising technological directions include thermal emission manipulation, cancer therapy, nanofabrication, nano-manipulation, plasmon-enabled material spectroscopy and thermo-catalysis, and solar water treatment. △ Less

Submitted 5 February, 2018; originally announced February 2018.

Comments: 43 pages, 18 figures

Journal ref: Advances in Optics and Photonics, Vol. 9, Issue 4, pp. 775-827 (2017)

Topological engineering of interfacial optical Tamm states for highly-sensitive near-singular-phase optical detection

Authors: Yoichiro Tsurimaki, Jonathan K. Tong, Victor N. Boriskin, Alexander Semenov, Mykola I. Ayzatsky, Yuri P. Machekhin, Gang Chen, Svetlana V. Boriskina

Abstract: We developed planar multilayered photonic-plasmonic structures, which support topologically protected optical states on the interface between metal and dielectric materials, known as optical Tamm states. Coupling of incident light to the Tamm states can result in perfect absorption within one of several narrow frequency bands, which is accompanied by a singular behavior of the phase of electromagn… ▽ More We developed planar multilayered photonic-plasmonic structures, which support topologically protected optical states on the interface between metal and dielectric materials, known as optical Tamm states. Coupling of incident light to the Tamm states can result in perfect absorption within one of several narrow frequency bands, which is accompanied by a singular behavior of the phase of electromagnetic field. In the case of near-perfect absorptance, very fast local variation of the phase can still be engineered. In this work, we theoretically and experimentally demonstrate how these drastic phase changes can improve sensitivity of optical sensors. A planar Tamm absorber was fabricated and used to demonstrate remote near-singular-phase temperature sensing with an over an order of magnitude improvement in sensor sensitivity and over two orders of magnitude improvement in the figure of merit over the standard approach of measuring shifts of resonant features in the reflectance spectra of the same absorber. Our experimentally demonstrated phase-to-amplitude detection sensitivity improvement nearly doubles that of state-of-the-art nano-patterned plasmonic singular-phase detectors, with further improvements possible via more precise fabrication. Tamm perfect absorbers form the basis for robust planar sensing platforms with tunable spectral characteristics, which do not rely on low-throughput nano-patterning techniques. △ Less

Submitted 10 January, 2018; originally announced January 2018.

Comments: 31 pages; 6 main text figures and 10 supplementary figures

Journal ref: ACS Photonics, 2018

Hybrid optical-thermal antennas for enhanced light focusing and local temperature control

Authors: Svetlana V. Boriskina, Lee A. Weinstein, Jonathan K. Tong, Wei-Chun Hsu, Gang Chen

Abstract: Metal nanoantennas supporting localized surface plasmon resonances have become an indispensable tool in bio(chemical) sensing and nanoscale imaging applications. The high plasmon-enhanced electric field intensity in the visible or near-IR range that enables the above applications may also cause local heating of nanoantennas. We present a design of hybrid optical-thermal antennas that simultaneousl… ▽ More Metal nanoantennas supporting localized surface plasmon resonances have become an indispensable tool in bio(chemical) sensing and nanoscale imaging applications. The high plasmon-enhanced electric field intensity in the visible or near-IR range that enables the above applications may also cause local heating of nanoantennas. We present a design of hybrid optical-thermal antennas that simultaneously enable intensity enhancement at the operating wavelength in the visible and nanoscale local temperature control. We demonstrate a possibility to reduce the hybrid antenna operating temperature via enhanced infrared thermal emission. We predict via rigorous numerical modeling that hybrid optical-thermal antennas that support high-quality-factor photonic-plasmonic modes enable up to two orders of magnitude enhancement of localized electric fields and of the optical power absorbed in the nanoscale metal volume. At the same time, the hybrid antenna temperature can be lowered by several hundred degrees with respect to its all-metal counterpart under continuous irradiance of 104-105 W/m2. The temperature reduction effect is attributed to the enhanced radiative cooling, which is mediated by the thermally-excited localized surface phonon polariton modes. We further show that temperature reduction under even higher irradiances can be achieved by a combination of enhanced radiative and convective cooling in hybrid antennas. Finally, we demonstrate how hybrid optical-thermal antennas can be used to achieve strong localized heating of nanoparticles while keeping the rest of the optical chip at low temperature. △ Less

Submitted 11 August, 2016; originally announced August 2016.

Comments: 24 pages, 11 figures

Journal ref: ACS Photonics, 2016

Entropic and Near-Field Improvements of Thermoradiative Cells

Authors: Wei-Chun Hsu, Jonathan K. Tong, Bolin Liao, Yi Huang, Svetlana V. Boriskina, Gang Chen

Abstract: A p-n junction maintained at above ambient temperature can work as a heat engine, converting some of the supplied heat into electricity and rejecting entropy by interband emission. Such thermoradiative cells have potential to harvest low-grade heat into electricity. By analyzing the entropy content of different spectral components of thermal radiation, we identify an approach to increase the effic… ▽ More A p-n junction maintained at above ambient temperature can work as a heat engine, converting some of the supplied heat into electricity and rejecting entropy by interband emission. Such thermoradiative cells have potential to harvest low-grade heat into electricity. By analyzing the entropy content of different spectral components of thermal radiation, we identify an approach to increase the efficiency of thermoradiative cells via spectrally selecting long-wavelength photons for radiative exchange. Furthermore, we predict that the near-field photon extraction by coupling photons generated from interband electronic transition to phonon polariton modes on the surface of a heat sink can increase the conversion efficiency as well as the power generation density, providing more opportunities to efficiently utilize terrestrial emission for clean energy. An ideal InSb thermoradiative cell can achieve a maximum efficiency and power density up to 20.4 % and 327 Wm-2, respectively, between a hot source at 500K and a cold sink at 300K. However, sub-bandgap and non-radiative losses will significantly degrade the cell performance. △ Less

Submitted 16 September, 2016; v1 submitted 29 June, 2016; originally announced June 2016.

Journal ref: Scientific Reports 6, Article number: 34837 (2016)

Quasicrystals: Making invisible materials

Authors: Svetlana V. Boriskina

Abstract: All-dielectric photonic quasicrystals may act as zero-refractive-index homogeneous materials despite their lack of translational symmetry and periodicity, stretching wavelengths to infinity and offering applications in light wavefront sculpting and optical cloaking. All-dielectric photonic quasicrystals may act as zero-refractive-index homogeneous materials despite their lack of translational symmetry and periodicity, stretching wavelengths to infinity and offering applications in light wavefront sculpting and optical cloaking. △ Less

Submitted 27 April, 2016; originally announced April 2016.

Comments: 5 pages, 2 figures

Journal ref: Nature Photonics 9(7):422-424, June 2015

Heat meets light on the nanoscale

Authors: Svetlana V. Boriskina, Jonathan K. Tong, Wei-Chun Hsu, Bolin Liao, Yi Huang, Vazrik Chiloyan, Gang Chen

Abstract: We discuss the state-of-the-art and remaining challenges in the fundamental understanding and technology development for controlling light-matter interactions in nanophotonic environments in and away from thermal equilibrium. The topics covered range from the basics of the thermodynamics of light emission and absorption, to applications in solar-thermal energy generation, thermophotovoltaics, opti… ▽ More We discuss the state-of-the-art and remaining challenges in the fundamental understanding and technology development for controlling light-matter interactions in nanophotonic environments in and away from thermal equilibrium. The topics covered range from the basics of the thermodynamics of light emission and absorption, to applications in solar-thermal energy generation, thermophotovoltaics, optical refrigeration, personalized cooling technologies, development of coherent incandescent light sources, and spinoptics. △ Less

Submitted 27 April, 2016; originally announced April 2016.

Comments: 46 pages, 11 figures; to appear in the special issue of Nanophotonics on 'Smart nanophotonics for renewable energy and sustainability' 2016

Hybrid optical-thermal devices and materials for light manipulation and radiative cooling

Authors: Svetlana V. Boriskina, Jonathan K. Tong, Wei-Chun Hsu, Lee Weinstein, Xiaopeng Huang, James Loomis, Yanfei Xu, Gang Chen

Abstract: We report on optical design and applications of hybrid meso-scale devices and materials that combine optical and thermal management functionalities owing to their tailored resonant interaction with light in visible and infrared frequency bands. We outline a general approach to designing such materials, and discuss two specific applications in detail. One example is a hybrid optical-thermal antenna… ▽ More We report on optical design and applications of hybrid meso-scale devices and materials that combine optical and thermal management functionalities owing to their tailored resonant interaction with light in visible and infrared frequency bands. We outline a general approach to designing such materials, and discuss two specific applications in detail. One example is a hybrid optical-thermal antenna with sub-wavelength light focusing, which simultaneously enables intensity enhancement at the operating wavelength in the visible and reduction of the operating temperature. The enhancement is achieved via light recycling in the form of whispering-gallery modes trapped in an optical microcavity, while cooling functionality is realized via a combination of reduced optical absorption and radiative cooling. The other example is a fabric that is opaque in the visible range yet highly transparent in the infrared, which allows the human body to efficiently shed energy in the form of thermal emission. Such fabrics can find numerous applications for personal thermal management and for buildings energy efficiency improvement. △ Less

Submitted 8 September, 2015; originally announced September 2015.

Comments: Proc. SPIE 9546, Active Photonic Materials VII, 95461U (September 1, 2015) 7 pages, 4 figures

Limiting efficiencies of solar energy conversion and photo-detection via internal emission of hot electrons and hot holes in gold

Authors: Svetlana V. Boriskina, Jiawei Zhou, Wei-Chun Hsu, Bolin Liao, Gang Chen

Abstract: We evaluate the limiting efficiency of full and partial solar spectrum harvesting via the process of internal photoemission in Au-semiconductor Schottky junctions. Our results based on the ab initio calculations of the electron density of states (e-DOS) reveal that the limiting efficiency of the full-spectrum Au converter based on hot electron injection is below 4%. This value is even lower than p… ▽ More We evaluate the limiting efficiency of full and partial solar spectrum harvesting via the process of internal photoemission in Au-semiconductor Schottky junctions. Our results based on the ab initio calculations of the electron density of states (e-DOS) reveal that the limiting efficiency of the full-spectrum Au converter based on hot electron injection is below 4%. This value is even lower than previously established limit based on the parabolic approximation of the Au electron energy bands. However, we predict limiting efficiency exceeding 10% for the hot holes collection through the Schottky junction between Au and p-type semiconductor. Furthermore, we demonstrate that such converters have more potential if used as a part of the hybrid system for harvesting high- and low-energy photons of the solar spectrum. △ Less

Submitted 8 September, 2015; originally announced September 2015.

Comments: Proc. SPIE 9608, Infrared Remote Sensing and Instrumentation XXIII, 960816 (September 1, 2015) 7 pages, 4 figures

Infrared-Transparent Visible-Opaque Fabrics for Wearable Personal Thermal Management

Authors: Jonathan K. Tong, Xiaopeng Huang, Svetlana V. Boriskina, James Loomis, Yanfei Xu, Gang Chen

Abstract: Personal cooling technologies locally control the temperature of an individual rather than a large space, thus providing personal thermal comfort while supplementing cooling loads in thermally regulated environments. This can lead to significant energy and cost savings. In this study, a new approach to personal cooling was developed using an infrared-transparent visible-opaque fabric (ITVOF), whic… ▽ More Personal cooling technologies locally control the temperature of an individual rather than a large space, thus providing personal thermal comfort while supplementing cooling loads in thermally regulated environments. This can lead to significant energy and cost savings. In this study, a new approach to personal cooling was developed using an infrared-transparent visible-opaque fabric (ITVOF), which provides passive cooling via the transmission of thermal radiation emitted by the human body directly to the environment. Here, we present a conceptual framework to thermally and optically design an ITVOF. Using a heat transfer model, the fabric was found to require a minimum infrared (IR) transmittance of 0.644 and a maximum IR reflectance of 0.2 to ensure thermal comfort at ambient temperatures as high as 26.1oC (79oF). To meet these requirements, an ITVOF design was developed using synthetic polymer fibers with an intrinsically low IR absorptance. These fibers were then structured to minimize IR reflection via weak Rayleigh scattering while maintaining visible opaqueness via strong Mie scattering. For a fabric composed of parallel-aligned polyethylene fibers, numerical finite element simulations predict 1 μm diameter fibers bundled into 30 μm yarns can achieve a total hemispherical IR transmittance of 0.972, which is nearly perfectly transparent to mid- and far-IR radiation. The visible wavelength properties of the ITVOF are comparable to conventional textiles ensuring opaqueness to the human eye. By providing personal cooling in a form amenable to everyday use, ITVOF-based clothing offers a simple, low-cost solution to reduce energy consumption in HVAC systems. △ Less

Submitted 15 July, 2015; originally announced July 2015.

Comments: 21 page; 8 figures

Journal ref: ASC Photonics, vol. 2, no. 6, pp. 769-778, 2015

Local field topology behind light localization and metamaterial topological transitions

Authors: Jonathan Tong, Alvin Mercedes, Gang Chen, Svetlana V. Boriskina

Abstract: We revisit the mechanisms governing the sub-wavelength spatial localization of light in surface plasmon polariton (SPP) modes by investigating both local and global features in optical powerflow at SPP frequencies. Close inspection of the instantaneous Poynting vector reveals formation of optical vortices - localized areas of cyclic powerflow - at the metal-dielectric interface. As a result, optic… ▽ More We revisit the mechanisms governing the sub-wavelength spatial localization of light in surface plasmon polariton (SPP) modes by investigating both local and global features in optical powerflow at SPP frequencies. Close inspection of the instantaneous Poynting vector reveals formation of optical vortices - localized areas of cyclic powerflow - at the metal-dielectric interface. As a result, optical energy circulates through a subwavelength-thick 'conveyor belt' between the metal and dielectric where it creates a high density of optical states (DOS), tight optical energy localization, and low group velocity associated with SPP waves. The formation of bonding and anti-bonding SPP modes in metal-dielectric-metal waveguides can also be conveniently explained in terms of different spatial arrangements of localized powerflow vortices between two metal interfaces. Finally, we investigate the underlying mechanisms of global topological transitions in metamaterials composed of multiple metal and dielectric films, i.e., transitions of their iso-frequency surfaces from ellipsoids to hyperboloids, which are not accompanied by the breaking of lattice symmetry. Our analysis reveals that such global topological transitions are governed by the dynamic local re-arrangement of local topological features of the optical interference field, such as vortices and saddle points, which reconfigures global optical powerflow within the metamaterial. These new insights into plasmonic light localization and DOS manipulation not only help to explain the well-known properties of SPP waves but also provide useful guidelines for the design of plasmonic components and materials for a variety of practical applications. △ Less

Submitted 11 February, 2015; originally announced February 2015.

Comments: 25 pages, 9 figures, Ch. 8 of Singular and Chiral Nanoplasmonics (S.V. Boriskina and N.I. Zheludev Eds.) Pan Stanford, Singapore, 2014

Plasmonic materials for energy: from physics to applications

Authors: Svetlana V. Boriskina, Hadi Ghasemi, Gang Chen

Abstract: Physical mechanisms unique to plasmonic materials, which can be exploited for the existing and emerging applications of plasmonics for renewable energy technologies, are reviewed. The hybrid nature of surface plasmon (SP) modes - propagating surface plasmon polaritons (SPPs) and localized surface plasmons (LSPs) - as collective photon-electron oscillations makes them attractive candidates for ener… ▽ More Physical mechanisms unique to plasmonic materials, which can be exploited for the existing and emerging applications of plasmonics for renewable energy technologies, are reviewed. The hybrid nature of surface plasmon (SP) modes - propagating surface plasmon polaritons (SPPs) and localized surface plasmons (LSPs) - as collective photon-electron oscillations makes them attractive candidates for energy applications. High density of optical states in the vicinity of plasmonic structures enhances light absorption and emission, enables localized heating, and drives near-field heat exchange between hot and cold surfaces. SP modes channel the energy of absorbed photons directly to the free electrons, and the generated hot electrons can be utilized in thermoelectric, photovoltaic and photo-catalytic platforms. Advantages and disadvantages of using plasmonics over conventional technologies for solar energy and waste heat harvesting are discussed, and areas where plasmonics is expected to lead to performance improvements not achievable by other methods are identified. △ Less

Submitted 25 October, 2013; originally announced October 2013.

Comments: 25 pages, 8 figures Materials Today, 2013