Showing 1–20 of 20 results for author: Bonfanti, S

Growth and prediction of plastic strain in metallic glasses

Authors: Tero Mäkinen, Anshul D. S. Parmar, Silvia Bonfanti, Mikko Alava

Abstract: Predicting the failure and plasticity of solids remains a longstanding challenge, with broad implications for materials design and functional reliability. Disordered solids like metallic glasses can fail either abruptly or gradually without clear precursors, and the mechanical response depends strongly on composition, thermal history and deformation protocol -- impeding generalizable modeling. Whi… ▽ More Predicting the failure and plasticity of solids remains a longstanding challenge, with broad implications for materials design and functional reliability. Disordered solids like metallic glasses can fail either abruptly or gradually without clear precursors, and the mechanical response depends strongly on composition, thermal history and deformation protocol -- impeding generalizable modeling. While deep learning methods offer predictive power, they often rely on numerous input parameters, hindering interpretability, methodology advancement and practical deployment. Here, we propose a macroscopic, physically grounded approach that uses plastic strain accumulation in the elastic regime to robustly predict deformation and yield. This method reduces complexity and improves interpretability, offering a practical alternative for disordered materials. For the Cu-Zr-(Al) metallic glasses prepared with varied annealing, we identify two limiting regimes of plastic strain growth: power-law in poorly annealed and exponential in well-annealed samples. A physics-informed framework with Bayesian inference extracts growth parameters from stress-strain data within $\sim$5\% strain, enabling early prediction of bulk response and yield point, well before the failure. The predictive performance improves with annealing, and bulk plasticity correlates with the microscopic plastic activity from scattered to growth near yielding. This work presents a physically interpretable and experimentally relevant framework for predicting plasticity and failure in metallic glasses from early mechanical response, offering both theoretical insights and practical tools for material characterization and design. △ Less

Submitted 6 July, 2025; originally announced July 2025.

Exploring the impact of Ti/Al on L12 nanoprecipitation and deformation behavior in CoNiFeAlTi multi-principal element alloys through atomistic simulations

Authors: Amin Esfandiarpour, Anshul D. S. Parmar, Silvia Bonfanti, Pawel Sobkowicz, Byeong-Joo Lee, Mikko Alava

Abstract: Recent studies on CoNi-based multi-principal element alloys (MPEAs) have demonstrated high strength and ductility, attributed to the formation of stable L12 nanoscale precipitates. However, the fundamental mechanisms behind such impressive properties in these complex alloys are not well understood. In this work, we investigate the effects of Ti and Al concentrations on the formation of L12 precipi… ▽ More Recent studies on CoNi-based multi-principal element alloys (MPEAs) have demonstrated high strength and ductility, attributed to the formation of stable L12 nanoscale precipitates. However, the fundamental mechanisms behind such impressive properties in these complex alloys are not well understood. In this work, we investigate the effects of Ti and Al concentrations on the formation of L12 precipitates in (CoNiFe)84(Al8Ti8), (CoNiFe)86(Al7Ti7), (CoNiFe)88(Al6Ti6), and (CoNiFe)94(Al4Ti2) MPEAs using hybrid molecular dynamics/Monte Carlo (MD/MC) simulations and a MEAM interatomic potential for the CoNiFeTiAl system. Additionally, we study the effect of L12 precipitation on the mechanical properties and stacking fault energy (SFE) of these MPEAs using MD. Our hybrid MD/MC simulations show that the (CoNiFe)86(Al7Ti7) alloy exhibits the highest amount of L12 nanoprecipitates. We find that L12 precipitation increases the SFE, with higher Al and Ti contents leading to greater increases. Tensile simulations reveal that L12 precipitates enhance yield strength, with alloys exhibiting higher precipitation showing increased flow stress. We also investigate dislocation-nanoprecipitate interactions with different precipitate sizes in the (CoNiFe)86(Al7Ti7) alloy. Larger nanoprecipitate sizes result in stronger dislocation pinning. Dislocations predominantly shear through 4-8 nm precipitates instead of looping around them (Orowan mechanism), enhancing strength while maintaining good ductility. Although the lattice mismatch between the L12 nanoprecipitate and the matrix is low (0.139%), the significant difference in SFE between the L12 nanoprecipitate and the matrix results in stronger dislocation pinning. This understanding can guide the design of MPEAs with tailored properties by controlling nanoscale precipitation. △ Less

Submitted 22 June, 2025; originally announced June 2025.

Comments: 20 pages, 8 figures

Journal ref: J. Alloys Compd. 1035 (2025) 181580 J. Alloys Compd. 1035 (2025) 181580 J. Alloys Compd. 1035 (2025) 181580

Efficient training of machine learning potentials for metallic glasses: CuZrAl validation

Authors: Antoni Wadowski, Anshul D. S. Parmar, Jesper Byggmästar, Jan S. Wróbel, Mikko J. Alava, Silvia Bonfanti

Abstract: Interatomic potentials play a vital role in revealing microscopic details and structure-property relations, which are fundamental for multiscale simulations and to assist high-throughput experiments. For metallic glasses, developing these potentials is challenging due to the complexity of their unique disordered structure. As a result, chemistry-specific interaction potentials for this important c… ▽ More Interatomic potentials play a vital role in revealing microscopic details and structure-property relations, which are fundamental for multiscale simulations and to assist high-throughput experiments. For metallic glasses, developing these potentials is challenging due to the complexity of their unique disordered structure. As a result, chemistry-specific interaction potentials for this important class of materials are often missing. Here, we solve this gap by implementing an efficient methodology for designing machine learning interatomic potentials (MLIPs) for metallic glasses, and we benchmark it with the widely studied CuZrAl system. By combining a Lennard-Jones surrogate model with swap-Monte Carlo sampling and Density Functional Theory (DFT) corrections, we capture diverse amorphous structures from 14 decades of supercooling. These distinct structures provide robust and efficient training of the model and applicability to the wider spectrum of energies. This approach reduces the need for extensive DFT and ab initio optimization datasets, while maintaining high accuracy. Our MLIP shows results comparable to the classical Embedded Atom Method (EAM) available for CuZrAl, in predicting structural, energetic, and mechanical properties. This work paves the way for the development of new MLIPs for complex metallic glasses, including emerging multicomponent and high entropy metallic glasses. △ Less

Submitted 31 December, 2024; originally announced January 2025.

Comments: 9 pages, 5 figures

Bayesian exploration of the composition space of CuZrAl metallic glasses for mechanical properties

Authors: Tero Mäkinen, Anshul D. S. Parmar, Silvia Bonfanti, Mikko J. Alava

Abstract: Designing metallic glasses in silico is a major challenge in materials science given their disordered atomic structure and the vast compositional space to explore. Here, we tackle this challenge by finding optimal compositions for target mechanical properties. We apply Bayesian exploration for the CuZrAl composition, a paradigmatic metallic glass known for its good glass forming ability. We exploi… ▽ More Designing metallic glasses in silico is a major challenge in materials science given their disordered atomic structure and the vast compositional space to explore. Here, we tackle this challenge by finding optimal compositions for target mechanical properties. We apply Bayesian exploration for the CuZrAl composition, a paradigmatic metallic glass known for its good glass forming ability. We exploit an automated loop with an online database, a Bayesian optimization algorithm, and molecular dynamics simulations. From the ubiquitous 50/50 CuZr starting point, we map the composition landscape changing the ratio of elements and adding aluminium to characterize the yield stress and the shear modulus. This approach demonstrates with relatively modest effort that the system has an optimal composition window for the yield stress around aluminium concentration $c_{\rm Al} = 15$ \% and zirconium concentration $c_{\rm Zr} = 30$ %. We also explore several cooling rates ("process parameters") and find that the best mechanical properties for a composition result from being most affected by the cooling procedure. Our Bayesian approach paves the novel way for the design of metallic glasses with "small data", with an eye toward both future in silico design and experimental applications exploiting this toolbox. △ Less

Submitted 8 November, 2024; originally announced November 2024.

Avalanches in CuZrAl metallic glasses

Authors: Tero Mäkinen, Anshul D. S. Parmar, Silvia Bonfanti, Mikko J. Alava

Abstract: Metallic glasses have mechanical properties, which exhibit avalanches in the disguise of stress drops. We study these phenomena in a classical metallic glass system CuZrAl by athermal quasistatic shear and varying the element concentrations and for pure CuZr 50/50 case the cooling rate. The resulting mechanical properties are close to the behaviour found experimentally. At small strains, the prist… ▽ More Metallic glasses have mechanical properties, which exhibit avalanches in the disguise of stress drops. We study these phenomena in a classical metallic glass system CuZrAl by athermal quasistatic shear and varying the element concentrations and for pure CuZr 50/50 case the cooling rate. The resulting mechanical properties are close to the behaviour found experimentally. At small strains, the pristine systems are akin to other glassy systems with a so-called gap distribution with a small positive exponent. Critical avalanching behaviour is found only approaching the yield point. The post-yield stress drops are universal, and the gap distribution becomes flat. △ Less

Submitted 23 September, 2024; originally announced September 2024.

Simulated multi-component CuZr(Al) metallic glasses akin to experiments

Authors: Rene Alvarez-Donado, Silvia Bonfanti, Mikko Alava

Abstract: We study a three-component CuZrAl metallic glass system by means of a combined Monte Carlo and Molecular Dynamics simulations scheme. This hybrid method allows us to generate equilibrated samples at temperatures below the conventional glass transition for the first time, achieving a more stable glassy regime. By using a realistic potential for the interactions of metallic species, we explore the k… ▽ More We study a three-component CuZrAl metallic glass system by means of a combined Monte Carlo and Molecular Dynamics simulations scheme. This hybrid method allows us to generate equilibrated samples at temperatures below the conventional glass transition for the first time, achieving a more stable glassy regime. By using a realistic potential for the interactions of metallic species, we explore the kinetics, thermodynamics, and rheology of a CuZrAl glass, and then compare these findings with those of the ubiquitous CuZr. Remarkably, the resulting sheared glassy configurations show an abrupt stress drop corresponding to the shear band, akin to experimental observations. Our results pave the way for theoretical studies of complex metallic glasses and offer comparisons with experiments. △ Less

Submitted 9 January, 2024; v1 submitted 11 September, 2023; originally announced September 2023.

Comments: 5 pages, supplementary information added to the end of the manuscript

Plastic deformation mechanisms during nanoindentation of W, Mo, V body-centered cubic single crystals and their corresponding W-Mo, W-V equiatomic random solid solutions

Authors: F. J. Dominguez-Gutierrez, S. Papanikolaou, S. Bonfanti, M. J. Alava

Abstract: Deformation plasticity mechanisms in alloys and compounds may unveil the material capacity towards optimal mechanical properties. We conduct a series of molecular dynamics (MD) simulations to investigate plasticity mechanisms due to nanoindentation in pure tungsten, molybdenum and vanadium body-centered cubic single crystals, as well as the also body-centered cubic, equiatomic, random solid soluti… ▽ More Deformation plasticity mechanisms in alloys and compounds may unveil the material capacity towards optimal mechanical properties. We conduct a series of molecular dynamics (MD) simulations to investigate plasticity mechanisms due to nanoindentation in pure tungsten, molybdenum and vanadium body-centered cubic single crystals, as well as the also body-centered cubic, equiatomic, random solid solutions (RSS) of tungsten--molybdenum and tungsten--vanadium alloys. Our analysis focuses on a thorough, side-by-side comparison of dynamic deformation processes, defect nucleation, and evolution, along with corresponding stress--strain curves. We also check the surface morphology of indented samples through atomic shear strain mapping. As expected, the presence of Mo and V atoms in W matrices introduces lattice strain and distortion, increasing material resistance to deformation and slowing down dislocation mobility of dislocation loops with a Burgers vector of 1/2 $\langle 111 \rangle$. Our side-by-side comparison displays a remarkable suppression of the plastic zone size in equiatomic W--V RSS, but not in equiatomic W--Mo RSS alloys, displaying a clear prediction for optimal hardening response equiatomic W--V RSS alloys. If the small-depth nanoindentation plastic response is indicative of overall mechanical performance, it is possible to conceive a novel MD-based pathway towards material design for mechanical applications in complex, multi-component alloys. △ Less

Submitted 23 August, 2023; originally announced August 2023.

Quasi-localized modes in crystalline high entropy alloys

Authors: Silvia Bonfanti, Roberto Guerra, Rene Alvarez-Donado, Pawel Sobkowicz, Stefano Zapperi, Mikko Alava

Abstract: High Entropy Alloys (HEAs) are designed by mixing multiple metallic species in nearly the same amount to obtain crystalline or amorphous materials with exceptional mechanical properties. Here we use molecular dynamics simulations to investigate the role of positional and compositional disorder in determining the low-frequency vibrational properties of CrMnFeCoNi HEAs. Our results show that the exp… ▽ More High Entropy Alloys (HEAs) are designed by mixing multiple metallic species in nearly the same amount to obtain crystalline or amorphous materials with exceptional mechanical properties. Here we use molecular dynamics simulations to investigate the role of positional and compositional disorder in determining the low-frequency vibrational properties of CrMnFeCoNi HEAs. Our results show that the expected dependence of the density of states on the frequency as $D(ω)\simω^4$ is recovered for amorphous HEAs and is also observed for partially crystallized alloys with deviations that depend on the degree of crystallization. We find that the quasi-localized vibrations are still visible in crystalline HEAs, albeit suppressed compared to the corresponding amorphous alloys. Our work offers a unified perspective to describe HEA mechanical properties in terms of their vibrational density of states. △ Less

Submitted 16 March, 2023; originally announced March 2023.

Comments: 8 pages, 7 figures

Predicting the failure of two-dimensional silica glasses

Authors: Francesc Font-Clos, Marco Zanchi, Stefan Hiemer, Silvia Bonfanti, Roberto Guerra, Michael Zaiser, Stefano Zapperi

Abstract: Being able to predict the failure of materials based on structural information is a fundamental issue with enormous practical and industrial relevance for the monitoring of devices and components. Thanks to recent advances in deep learning, accurate failure predictions are becoming possible even for strongly disordered solids, but the sheer number of parameters used in the process renders a physic… ▽ More Being able to predict the failure of materials based on structural information is a fundamental issue with enormous practical and industrial relevance for the monitoring of devices and components. Thanks to recent advances in deep learning, accurate failure predictions are becoming possible even for strongly disordered solids, but the sheer number of parameters used in the process renders a physical interpretation of the results impossible. Here we address this issue and use machine learning methods to predict the failure of simulated two dimensional silica glasses from their initial undeformed structure. We then exploit Gradient-weighted Class Activation Mapping (Grad-CAM) to build attention maps associated with the predictions, and we demonstrate that these maps are amenable to physical interpretation in terms of topological defects and local potential energies. We show that our predictions can be transferred to samples with different shape or size than those used in training, as well as to experimental images. Our strategy illustrates how artificial neural networks trained with numerical simulation results can provide interpretable predictions of the behavior of experimentally measured structures. △ Less

Submitted 24 January, 2022; originally announced January 2022.

Comments: 41 pages 13 figures

Universal Density of Low Frequency States in Silica Glass at Finite Temperatures

Authors: Roberto Guerra, Silvia Bonfanti, Itamar Procaccia, Stefano Zapperi

Abstract: The theoretical understanding of the low-frequency modes in amorphous solids at finite temperature is still incomplete. The study of the relevant modes is obscured by the dressing of inter-particle forces by collision-induced momentum transfer that is unavoidable at finite temperatures. Recently, it was proposed that low frequency modes of vibrations around the {\em thermally averaged} configurati… ▽ More The theoretical understanding of the low-frequency modes in amorphous solids at finite temperature is still incomplete. The study of the relevant modes is obscured by the dressing of inter-particle forces by collision-induced momentum transfer that is unavoidable at finite temperatures. Recently, it was proposed that low frequency modes of vibrations around the {\em thermally averaged} configurations deserve special attention. In simple model glasses with bare binary interactions, these included quasi-localized modes whose density of states appears to be universal, depending on the frequencies as $D(ω) \sim ω^4$, in agreement with the similar law that is obtained with bare forces at zero temperature. In this work, we report investigations of a model of silica glass at finite temperature; here the bare forces include binary and ternary interactions. Nevertheless we can establish the validity of the universal law of the density of quasi-localized modes also in this richer and more realistic model glass. △ Less

Submitted 3 May, 2022; v1 submitted 20 September, 2021; originally announced September 2021.

Journal ref: Physical Review E 105, 054104 (2022)

Universal low-frequency vibrational modes in silica glasses

Authors: Silvia Bonfanti, Roberto Guerra, Chandana Mondal, Itamar Procaccia, Stefano Zapperi

Abstract: It was recently shown that different simple models of glass formers with binary interactions define a universality class in terms of the density of states of their quasi-localized low-frequency modes. Explicitly, once the hybridization with standard Debye (extended) modes is avoided, a number of such models exhibit a universal density of state, depending on the mode frequencies as $D(ω) \sim ω^4$.… ▽ More It was recently shown that different simple models of glass formers with binary interactions define a universality class in terms of the density of states of their quasi-localized low-frequency modes. Explicitly, once the hybridization with standard Debye (extended) modes is avoided, a number of such models exhibit a universal density of state, depending on the mode frequencies as $D(ω) \sim ω^4$. It is unknown however how wide is this universality class, and whether it also pertains to more realistic models of glass formers. To address this issue we present analysis of the quasi-localized modes in silica, a network glass which has both binary and ternary interactions. We conclude that in 3-dimensions silica exhibits the very same frequency dependence at low frequencies, suggesting that this universal form is a generic consequence of amorphous glassiness. △ Less

Submitted 17 March, 2020; originally announced March 2020.

Comments: 4 pages, 5 figures, Submitted in parallel to "Universality of the nonphononic vibrational spectrum across different classes of computer glasses" to arXiv on March 17th, 2020

Journal ref: Phys. Rev. Lett. 125, 085501 (2020)

Unjamming of active rotators

Authors: Linda Ravazzano, Maria Chiara Lionetti, Maria Rita Fumagalli, Silvia Bonfanti, Roberto Guerra, Oleksandr Chepizhko, Caterina A. M. La Porta, Stefano Zapperi

Abstract: Active particle assemblies can exhibit a wide range of interesting dynamical phases depending on internal parameters such as density, adhesion strength or self-propulsion. Active self-rotations are rarely studied in this context, although they can be relevant for active matter systems, as we illustrate by analyzing the motion of Chlamydomonas reinhardtii algae under different experimental conditio… ▽ More Active particle assemblies can exhibit a wide range of interesting dynamical phases depending on internal parameters such as density, adhesion strength or self-propulsion. Active self-rotations are rarely studied in this context, although they can be relevant for active matter systems, as we illustrate by analyzing the motion of Chlamydomonas reinhardtii algae under different experimental conditions. Inspired by this example, we simulate the dynamics of a system of interacting active disks endowed with active torques. At low packing fractions, adhesion causes the formation of small rotating clusters, resembling those observed when algae are stressed. At higher densities, the model shows a jamming to unjamming transition promoted by active torques and hindered by adhesion. Our results yield a comprehensive picture of the dynamics of active rotators, providing useful guidance to interpret experimental results in cellular systems where rotations might play a role. △ Less

Submitted 13 March, 2020; originally announced March 2020.

Comments: 18 pages, 5 figures

Automatic Design of Mechanical Metamaterial Actuators

Authors: Silvia Bonfanti, Roberto Guerra, Francesc Font Clos, Daniel Rayneau-Kirkhope, Stefano Zapperi

Abstract: Mechanical metamaterials actuators achieve pre-determined input--output operations exploiting architectural features encoded within a single 3D printed element, thus removing the need of assembling different structural components. Despite the rapid progress in the field, there is still a need for efficient strategies to optimize metamaterial design for a variety of functions. We present a computat… ▽ More Mechanical metamaterials actuators achieve pre-determined input--output operations exploiting architectural features encoded within a single 3D printed element, thus removing the need of assembling different structural components. Despite the rapid progress in the field, there is still a need for efficient strategies to optimize metamaterial design for a variety of functions. We present a computational method for the automatic design of mechanical metamaterial actuators that combines a reinforced Monte Carlo method with discrete element simulations. 3D printing of selected mechanical metamaterial actuators shows that the machine-generated structures can reach high efficiency, exceeding human-designed structures. We also show that it is possible to design efficient actuators by training a deep neural network, eliminating the need for lengthy mechanical simulations. The elementary actuators devised here can be combined to produce metamaterial machines of arbitrary complexity for countless engineering applications. △ Less

Submitted 6 February, 2020; originally announced February 2020.

Elementary plastic events in amorphous silica

Authors: Silvia Bonfanti, Roberto Guerra, Chandana Mondal, Itamar Procaccia, Stefano Zapperi

Abstract: Plastic instabilities in amorphous materials are often studied using idealized models of binary mixtures that do not capture accurately molecular interactions and bonding present in real glasses. Here we study atomic scale plastic instabilities in a three dimensional molecular dynamics model of silica glass under quasi-static shear. We identify two distinct types of elementary plastic events, one… ▽ More Plastic instabilities in amorphous materials are often studied using idealized models of binary mixtures that do not capture accurately molecular interactions and bonding present in real glasses. Here we study atomic scale plastic instabilities in a three dimensional molecular dynamics model of silica glass under quasi-static shear. We identify two distinct types of elementary plastic events, one is a standard quasi-localized atomic rearrangement while the second is a bond breaking event that is absent in simplified models of fragile glass formers. Our results show that both plastic events can be predicted by a drop of the lowest non-zero eigenvalue of the Hessian matrix that vanishes at a critical strain. Remarkably, we find very high correlation between the associated eigenvectors and the non-affine displacement fields accompanying the bond breaking event, predicting the locus of structural failure. Both eigenvectors and non-affine displacement fields display an Eshelby-like quadrupolar structure for both failure modes, rearrangement or bond-breaking. Our results thus clarify the nature of atomic scale plastic instabilities in silica glasses providing useful information for the development of mesoscale models of amorphous plasticity. △ Less

Submitted 23 October, 2019; originally announced October 2019.

Journal ref: Phys. Rev. E 100, 060602 (2019)

Protein driven lipid domain nucleation in biological membranes

Authors: Moritz Hoferer, Silvia Bonfanti, Alessandro Taloni, Caterina A. M. La Porta, Stefano Zapperi

Abstract: Lipid rafts are heterogeneous dynamic lipid domains of the cell membranes that are involved in several biological processes, like protein and lipids specific transport and signaling. Our understanding of lipid raft formation is still limited, due to the transient and elusive nature of these domains {\it in vivo}, in contrast to the stable phase-separated domains observed in artificial membranes. I… ▽ More Lipid rafts are heterogeneous dynamic lipid domains of the cell membranes that are involved in several biological processes, like protein and lipids specific transport and signaling. Our understanding of lipid raft formation is still limited, due to the transient and elusive nature of these domains {\it in vivo}, in contrast to the stable phase-separated domains observed in artificial membranes. Inspired by experimental findings highlighting the relevance of transmembrane proteins for lipid rafts, we investigate lipid domain nucleation by coarse-grained molecular dynamics and Ising model simulations. We find that the presence of a transmembrane protein can trigger lipid domain nucleation in a flat membrane from an otherwise mixed lipid phase. Furthermore, we study the role of the lipid domain in the diffusion of the protein showing that its mobility is hindered by the presence of the raft. The results of our coarse-grained molecular dynamics and Ising model simulations thus coherently support the important role played by transmembrane proteins in lipid domain formation and stability. △ Less

Submitted 4 February, 2020; v1 submitted 18 September, 2019; originally announced September 2019.

Comments: 9 pages, 7 figures, revision of typos und punctuation, replacement of media links to freely accessible platforms

Journal ref: Phys. Rev. E 100, 042410 (2019)

Oscillatory Instabilities in 3-Dimensional Frictional Granular Matter

Authors: Silvia Bonfanti, Joyjit Chattoraj, Roberto Guerra, Itamar Procaccia, Stefano Zapperi

Abstract: The dynamics of amorphous granular matter with frictional interactions cannot be derived in general from a Hamiltonian and therefore displays oscillatory instabilities stemming from the onset of complex eigenvalues in the stability matrix. These instabilities were discovered in the context of one and two dimensional systems, while the three dimensional case was never studied in detail. Here we fil… ▽ More The dynamics of amorphous granular matter with frictional interactions cannot be derived in general from a Hamiltonian and therefore displays oscillatory instabilities stemming from the onset of complex eigenvalues in the stability matrix. These instabilities were discovered in the context of one and two dimensional systems, while the three dimensional case was never studied in detail. Here we fill this gap by deriving and demonstrating the presence of oscillatory instabilities in a three dimensional granular packing. We study binary assemblies of spheres of two sizes interacting via classical Hertz and Mindlin force laws for the longitudinal and tangent interactions, respectively. We formulate analytically the stability matrix in 3D and observe that a couple of complex eigenvalues emerges at the onset of the instability as in the case of frictional disks in two-dimensions. The dynamics then shows oscillatory exponential growth in the Mean-Square-Displacement, followed by a catastrophic event. The generality of these results for any choice of forces that break the symplectic Hamiltonian symmetry is discussed. △ Less

Submitted 10 September, 2019; originally announced September 2019.

Comments: arXiv admin note: substantial text overlap with arXiv:1903.10887, arXiv:1901.02376

Journal ref: Phys. Rev. E 101, 052902 (2020)

Density scaling in the mechanics of a disordered mechanical meta-material

Authors: Daniel Rayneau-Kirkhope, Silvia Bonfanti, Stefano Zapperi

Abstract: Nature provides examples of self-assemble lightweight disordered network structures with remarkable mechanical properties which are desirable for many applications purposes but challenging to reproduce artificially. Previous experimental and computational studies investigated the mechanical responses of random network structures focusing on topological and geometrical aspects in terms of variable… ▽ More Nature provides examples of self-assemble lightweight disordered network structures with remarkable mechanical properties which are desirable for many applications purposes but challenging to reproduce artificially. Previous experimental and computational studies investigated the mechanical responses of random network structures focusing on topological and geometrical aspects in terms of variable connectivity or probability to place beam elements. However for practical purposes an ambitious challenge is to design new materials with the possibility to taylor their mechanical features such as stiffness. Here, we design a two dimensional disordered mechanical meta-material exhibiting unconventional stiffness-density scaling in the regime where both bending and stretching are relevant for deformation. In this regime, the mechanical meta-material covers a wide interval of the Young modulus - density plane, simultaneously exhibiting high critical stress and critical strain. Our results, supported by finite element simulations, provides the guiding principles to design on demand disordered metamaterials, bridging the gap between artificial and naturally occurring materials. △ Less

Submitted 27 November, 2018; originally announced November 2018.

Comments: 6 pages, 4 figures

Methods to locate Saddle Points in Complex Landscapes

Authors: Silvia Bonfanti, Walter Kob

Abstract: We present a class of simple algorithms that allows to find the reaction path in systems with a complex potential energy landscape. The approach does not need any knowledge on the product state and does not require the calculation of any second derivatives. The underlying idea is to use two nearby points in configuration space to locate the path of slowest ascent. By introducing a weak noise term,… ▽ More We present a class of simple algorithms that allows to find the reaction path in systems with a complex potential energy landscape. The approach does not need any knowledge on the product state and does not require the calculation of any second derivatives. The underlying idea is to use two nearby points in configuration space to locate the path of slowest ascent. By introducing a weak noise term, the algorithm is able to find even low-lying saddle points that are not reachable by means of a slowest ascent path. Since the algorithm makes only use of the value of the potential and its gradient, the computational effort to find saddles is linear in the number of degrees of freedom, if the potential is short-ranged. We test the performance of the algorithm for two potential energy landscapes. For the Müller-Brown surface we find that the algorithm always finds the correct saddle point. For the modified Müller-Brown surface, which has a saddle point that is not reachable by means of a slowest ascent path, the algorithm is still able to find this saddle point with high probability. △ Less

Submitted 5 January, 2017; originally announced January 2017.

Comments: 10 pages, 8 figures

Journal ref: J. Chem. Phys. 147, 204104 (2017)

Realistic Tunneling States for the Magnetic Effects in Non-Metallic Real Glasses

Authors: Giancarlo Jug, Silvia Bonfanti, Walter Kob

Abstract: The discovery of magnetic and compositional effects in the low temperature properties of multi-component glasses has prompted the need to extend the standard two-level systems (2LSs) tunneling model. A possible extension \cite{Jug2004} assumes that a subset of tunneling quasi-particles is moving in a three-welled potential (TWP) associated with the ubiquitous inhomogeneities of the disordered atom… ▽ More The discovery of magnetic and compositional effects in the low temperature properties of multi-component glasses has prompted the need to extend the standard two-level systems (2LSs) tunneling model. A possible extension \cite{Jug2004} assumes that a subset of tunneling quasi-particles is moving in a three-welled potential (TWP) associated with the ubiquitous inhomogeneities of the disordered atomic structure of the glass. We show that within an alternative, cellular description of the intermediate-range atomic structure of glasses the tunneling TWP can be fully justified. We then review how the experimentally discovered magnetic effects can be explained within the approach where only localized atomistic tunneling 2LSs and quasi-particles tunneling in TWPs are allowed. We discuss the origin of the magnetic effects in the heat capacity, dielectric constant (real and imaginary parts), polarization echo and SQUID magnetization in several glassy systems. We conclude by commenting on a strategy to reveal the mentioned tunneling states (2LSs and TWPs) by means of atomistic computer simulations and discuss the microscopic nature of the tunneling states in the context of the potential energy landscape of glass-forming systems. △ Less

Submitted 10 August, 2015; originally announced August 2015.

Comments: 48 pages, 27 figures; mini-review for the Proceedings of the XIV International Workshop on Complex Systems (Fai della Paganella, Trento, March 2015) (submitted to Phil.Mag.). arXiv admin note: text overlap with arXiv:cond-mat/0210221 by other authors

On the Paramagnetic Impurity Concentration of Silicate Glasses from Low-Temperature Physics

Authors: Silvia Bonfanti, Giancarlo Jug

Abstract: The concentration of paramagnetic trace impurities in glasses can be determined via precise SQUID measurements of the sample's magnetization in a magnetic field. However the existence of quasi-ordered structural inhomogeneities in the disordered solid causes correlated tunneling currents that can contribute to the magnetization, surprisingly, also at the higher temperatures. We show that taking in… ▽ More The concentration of paramagnetic trace impurities in glasses can be determined via precise SQUID measurements of the sample's magnetization in a magnetic field. However the existence of quasi-ordered structural inhomogeneities in the disordered solid causes correlated tunneling currents that can contribute to the magnetization, surprisingly, also at the higher temperatures. We show that taking into account such tunneling systems gives rise to a good agreement between the concentrations extracted from SQUID magnetization and those extracted from low-temperature heat capacity measurements. Without suitable inclusion of such magnetization contribution from the tunneling currents we find that the concentration of paramagnetic impurities gets considerably over-estimated. This analysis represents a further positive test for the structural inhomogeneity theory of the magnetic effects in the cold glasses. △ Less

Submitted 22 April, 2015; originally announced April 2015.

Comments: 27 pages, 11 figures, 10 tables, 41 references: submitted to Journal of Low Temperature Physics