-
Increasing the Resistance of Magnetic Flux Concentrator during Generation of Strong Pulsed Magnetic Fields
Authors:
P. A. Russkikh,
G. Sh. Boltachev
Abstract:
The possibility of significant increase of generated pulsed magnetic fields by the inductor system of a single-turn solenoid and magnetic flux concentrator without initialization of low-cycle fatigue mechanism is theoretically studied by varying the size of the inductor system, the material of the concentrator and the parameters of the discharge circuit. The analysis is carried out on the basis of…
▽ More
The possibility of significant increase of generated pulsed magnetic fields by the inductor system of a single-turn solenoid and magnetic flux concentrator without initialization of low-cycle fatigue mechanism is theoretically studied by varying the size of the inductor system, the material of the concentrator and the parameters of the discharge circuit. The analysis is carried out on the basis of self-consistent solution of the equation, which describes dynamics of the discharge electric circuit, with equations describing spatial distributions of magnetic and temperature fields, mechanical stresses and deformations in the inductor and concentrator. It is shown that for traditionally used steel concentrators by varying the electrical resistance of the circuit it is possible to increase the amplitude of generated pulsed magnetic fields without the threat of concentrator destruction by about 25~\%, from 32 to 40~T.
△ Less
Submitted 23 May, 2025;
originally announced May 2025.
-
Elastic Properties, Yield Surface and Flow Rule of Nanopowder Compacts
Authors:
G. Sh. Boltachev,
E. A. Chingina,
N. B. Volkov,
K. E. Lukyashin
Abstract:
Different compaction processes of the nanosized granular system, which is a prototype of an alumina nanopowder, are studied by the granular dynamics method. For all processes: compaction curves ''density vs. pressure'' of the powder compact are calculated, the elastic and the plastic parts are extracted from the total deformation, the body elastic moduli are determined within the isotropic solid a…
▽ More
Different compaction processes of the nanosized granular system, which is a prototype of an alumina nanopowder, are studied by the granular dynamics method. For all processes: compaction curves ''density vs. pressure'' of the powder compact are calculated, the elastic and the plastic parts are extracted from the total deformation, the body elastic moduli are determined within the isotropic solid approximation. The inadequacy of the isotropy approximation is established. The nanopowder yield surface is constructed in the space of stress tensor invariants. The inapplicability of the traditional associated flow rule for description of oxide nanopowders compaction processes is revealed. An alternative flow rule is suggested.
△ Less
Submitted 31 January, 2020;
originally announced January 2020.
-
Simulation of nanopowder high-speed compaction by 2d granular dynamics method
Authors:
G. Sh. Boltachev,
N. B. Volkov,
A. V. Spirin,
E. A. Chingina
Abstract:
The paper concerns the nanopowder high-speed, $10^4$ - $10^9$ s${}^{-1}$, compaction processes modeling by a two-dimensional granular dynamics method. Nanoparticles interaction, in addition to known contact laws, included dispersive attraction, formation of a strong interparticle bonding (powder agglomeration) as well as the forces caused by viscous stresses in the contact region. For different de…
▽ More
The paper concerns the nanopowder high-speed, $10^4$ - $10^9$ s${}^{-1}$, compaction processes modeling by a two-dimensional granular dynamics method. Nanoparticles interaction, in addition to known contact laws, included dispersive attraction, formation of a strong interparticle bonding (powder agglomeration) as well as the forces caused by viscous stresses in the contact region. For different densification rates, the "pressure vs. density" curves (densification curves) were calculated. Relaxation of the stresses after the compression stage was analyzed as well. The densification curves analysis allowed us to suggest the dependence of compaction pressure as a function of strain rate. It was found that in contrast to the plastic flow of metals, where the yield strength is proportional to the logarithm of the strain rate, the power-law dependence of applied pressure on the strain rate as $p\propto v^{1/4}$ was established for the modeled nanosized powders.
△ Less
Submitted 13 September, 2017;
originally announced September 2017.
-
Compaction and flow rule of oxide nanopowders
Authors:
G. Sh. Boltachev,
K. E. Lukyashin,
A. L. Maximenko,
R. N. Maksimov,
V. A. Shitov,
M. B. Shtern
Abstract:
Transparent Al2O3 ceramics have attracted considerable interest for use in a wide range of optical, electronic and structural applications. The fabrication of these ceramics using powder metallurgy processes requires the development of theoretical approaches to the compaction of nanopowders. In this work, we investigate the compaction processes of two model granular systems imitating Al2O3 nanosiz…
▽ More
Transparent Al2O3 ceramics have attracted considerable interest for use in a wide range of optical, electronic and structural applications. The fabrication of these ceramics using powder metallurgy processes requires the development of theoretical approaches to the compaction of nanopowders. In this work, we investigate the compaction processes of two model granular systems imitating Al2O3 nanosized powders. System I is a loosely aggregated powder, and system II is a powder strongly inclined to agglomeration (for instance, calcined powder). The processes of isostatical (uniform), biaxial, and uniaxial compaction as well as uniaxial compaction with simultaneous shear deformation are studied. The energy parameters of compaction such as the energy change of elastic interparticle interactions and dispersion interactions, dissipative energy losses related to the processes of interparticle friction, and the total work of compaction are calculated for all the processes. The nonapplicability of the associated flow rule to the description of deformation processes of oxide nanopowders is shown and an alternative plastic flow rule is suggested. A complete system of determining the relationship of the flow including analytical approximations of yield surfaces is obtained.
△ Less
Submitted 20 September, 2016;
originally announced September 2016.
-
Macromechanical behavior of oxide nanopowders during compaction processes
Authors:
Grey Sh. Boltachev,
Nikolay B. Volkov,
Evgeny A. Kochurin,
Andrey L. Maximenko,
Mikhail B. Shtern,
Elena G. Kirkova
Abstract:
Two granular systems (I and II) corresponding oxide nanopowders having different agglomeration tendency are simulated by the granular dynamics method. The particle size is 10 nanometer. The interaction of particles involves the elastic forces of repulsion, the tangential forces of "friction", the dispersion forces of attraction, and in the case of II system the opportunity of creation/destruction…
▽ More
Two granular systems (I and II) corresponding oxide nanopowders having different agglomeration tendency are simulated by the granular dynamics method. The particle size is 10 nanometer. The interaction of particles involves the elastic forces of repulsion, the tangential forces of "friction", the dispersion forces of attraction, and in the case of II system the opportunity of creation/destruction of hard bonds of chemical nature. The processes of the uniaxial compaction, the biaxial (radial) one, the isotropic one, the compaction combined with shear deformation as well as the simple shear deformation are studied. The effect of the positive dilatancy is found out in the processes of shear deformation. The loading surfaces of nanopowders are constructed in the space of stress tensor invariants, i.e., the hydrostatic pressure and the deviator intensity. It is revealed that the form of the loading surfaces is similar to an ellipse, which is shifted along the hydrostatic axis to compressive pressures. The associated flow rule is analyzed. The nonorthogonality of the deformation vectors to the loading surface is established in the both systems modeled.
△ Less
Submitted 22 September, 2014;
originally announced September 2014.
