-
Single-crystalline gold nanodisks on WS$_2$ mono- and multilayers: Strong coupling at room temperature
Authors:
Mathias Geisler,
Ximin Cui,
Jianfang Wang,
Tomas Rindzevicius,
Lene Gammelgaard,
Bjarke S. Jessen,
P. A. D. Gonçalves,
Francesco Todisco,
Peter Bøggild,
Anja Boisen,
Martijn Wubs,
N. Asger Mortensen,
Sanshui Xiao,
Nicolas Stenger
Abstract:
Engineering light-matter interactions up to the strong-coupling regime at room temperature is one of the cornerstones of modern nanophotonics. Achieving this goal will enable new platforms for potential applications such as quantum information processing, quantum light sources and even quantum metrology. Materials like transition metal dichalcogenides (TMDC) and in particular tungsten disulfide (W…
▽ More
Engineering light-matter interactions up to the strong-coupling regime at room temperature is one of the cornerstones of modern nanophotonics. Achieving this goal will enable new platforms for potential applications such as quantum information processing, quantum light sources and even quantum metrology. Materials like transition metal dichalcogenides (TMDC) and in particular tungsten disulfide (WS$_2$) possess large transition dipole moments comparable to semiconductor-based quantum dots, and strong exciton binding energies allowing the detailed exploration of light-matter interactions at room temperature. Additionally, recent works have shown that coupling TMDCs to plasmonic nanocavities with light tightly focused on the nanometer scale can reach the strong-coupling regime at ambient conditions. Here, we use ultra-thin single-crystalline gold nanodisks featuring large in-plane electromagnetic dipole moments aligned with the exciton transition-dipole moments located in monolayer WS$_2$. Through scattering and reflection spectroscopy we demonstrate strong coupling at room temperature with a Rabi splitting of $\sim$108 meV. In order to go further into the strong-coupling regime and inspired by recent experimental work by Stührenberg et al., we couple these nanodisks to multilayer WS$_2$. Due to an increase in the number of excitons coupled to our nanodisks, we achieve a Rabi splitting of $\sim$175 meV, a major increase of 62%. To our knowledge, this is the highest Rabi splitting reported for TMDCs coupled to open plasmonic cavities. Our results suggest that ultra-thin single-crystalline gold nanodisks coupled to WS$_2$ represent an exquisite platform to explore light-matter interactions.
△ Less
Submitted 22 December, 2018;
originally announced December 2018.
-
Position and Mode Dependent Optical Detection Back-Action in Cantilever Beam Resonators
Authors:
T. Larsen. S. Schmid,
S. Dohn,
J. E. Sader,
A. Boisen,
L. G. Villanueva
Abstract:
Optical detection back-action in cantilever resonant or static detection presents a challenge when striving for state-of-the-art performance. The origin and possible routes for minimizing optical back-action have received little attention in literature. Here, we investigate the position and mode dependent optical back-action on cantilever beam resonators. A high power heating laser (100 μW) is sca…
▽ More
Optical detection back-action in cantilever resonant or static detection presents a challenge when striving for state-of-the-art performance. The origin and possible routes for minimizing optical back-action have received little attention in literature. Here, we investigate the position and mode dependent optical back-action on cantilever beam resonators. A high power heating laser (100 μW) is scanned across a silicon nitride cantilever while its effect on the first three resonance modes is detected via a low-power readout laser (1 μW) positioned at the cantilever tip. We find that the measured effect of back-action is not only dependent on position but also the shape of the resonance mode. Relevant silicon nitride material parameters are extracted by fitting the temperature-dependent frequency response of the first three modes to finite element (FE) simulations. In a second round of simulations, using the extracted parameters, we successfully fit the FEM results with the measured mode and position dependent back-action. Finally, different routes for minimizing the effect of this optical detection back-action are described, allowing further improvements of cantilever-based sensing in general.
△ Less
Submitted 23 February, 2017;
originally announced February 2017.
-
Non-linear optomechanical measurement of mechanical motion
Authors:
G. A. Brawley,
M. R. Vanner,
P. E. Larsen,
S. Schmid,
A. Boisen,
W. P. Bowen
Abstract:
Precision measurement of non-linear observables is an important goal in all facets of quantum optics. This allows measurement-based non-classical state preparation, which has been applied to great success in various physical systems, and provides a route for quantum information processing with otherwise linear interactions. In cavity optomechanics much progress has been made using linear interacti…
▽ More
Precision measurement of non-linear observables is an important goal in all facets of quantum optics. This allows measurement-based non-classical state preparation, which has been applied to great success in various physical systems, and provides a route for quantum information processing with otherwise linear interactions. In cavity optomechanics much progress has been made using linear interactions and measurement, but observation of non-linear mechanical degrees-of-freedom remains outstanding. Here we report the observation of displacement-squared thermal motion of a micro-mechanical resonator by exploiting the intrinsic non-linearity of the radiation pressure interaction. Using this measurement we generate bimodal mechanical states of motion with separations and feature sizes well below 100~pm. Future improvements to this approach will allow the preparation of quantum superposition states, which can be used to experimentally explore collapse models of the wavefunction and the potential for mechanical-resonator-based quantum information and metrology applications.
△ Less
Submitted 19 October, 2017; v1 submitted 23 April, 2014;
originally announced April 2014.
-
Low-power photothermal probing of single plasmonic nanostructures with nanomechanical string resonators
Authors:
Silvan Schmid,
Kaiyu Wu,
Peter Emil Larsen,
Tomas Rindzevicius,
Anja Boisen
Abstract:
We demonstrate the direct photothermal probing and mapping of single plasmonic nanostructures via the temperature induced detuning of nanomechanical string resonators. Single Au nanoslits are illuminated with a low-power polarized focused laser beam (λ = 633 nm). Polarization dependent heat generation in gold nanoslits is then imaged with high sensitivity. A sensitivity of -4.1 ppm/nW with respect…
▽ More
We demonstrate the direct photothermal probing and mapping of single plasmonic nanostructures via the temperature induced detuning of nanomechanical string resonators. Single Au nanoslits are illuminated with a low-power polarized focused laser beam (λ = 633 nm). Polarization dependent heat generation in gold nanoslits is then imaged with high sensitivity. A sensitivity of -4.1 ppm/nW with respect to the illuminated light (beam diameter 5.0pm0.8 μm) is determined for a single nanoslit (1 μm long and 53 nm wide), which equals to a total light absorption of 16%. This results in a heating of 0.5 K for an illuminance of 8 nW/μm2. Our results show that nanomechanical resonators are a unique and robust analysis tool for the low-power investigation of thermoplasmonic effects in plasmonic hot spots.
△ Less
Submitted 17 December, 2013;
originally announced December 2013.
-
Enhanced light-matter interaction in graphene-covered gold nanovoid arrays
Authors:
Xiaolong Zhu,
Lei Shi,
Michael S. Schmidt,
Anja Boisen,
Ole Hansen,
Jian Zi,
Sanshui Xiao,
N. Asger Mortensen
Abstract:
The combination of graphene with noble-metal nanostructures is currently being explored for strong light-graphene interaction enhanced by plasmons. We introduce a novel hybrid graphene-metal system for studying light-matter interactions with gold-void nanostructures exhibiting resonances in the visible range. Strong coupling of graphene layers to the plasmon modes of the nanovoid arrays results in…
▽ More
The combination of graphene with noble-metal nanostructures is currently being explored for strong light-graphene interaction enhanced by plasmons. We introduce a novel hybrid graphene-metal system for studying light-matter interactions with gold-void nanostructures exhibiting resonances in the visible range. Strong coupling of graphene layers to the plasmon modes of the nanovoid arrays results in significant frequency shifts of the underlying plasmon resonances, enabling more than 30% absolute light absorption in a single layer of graphene and up to 700-fold enhancement of the Raman response of the graphene. These new perspectives enable us to verify the presence of graphene on gold-void arrays and the enhancement even allows us to accurately quantify the number of layers. Experimental observations are further supported by numerical simulations and perturbation-theory analysis. The graphene gold-void platform is beneficial for sensing of molecules and placing R6G dye molecules on top of the graphene, we observe a strong enhancement of the R6G Raman fingerprints. These results pave the way toward advanced substrates for surface-enhanced Raman scattering (SERS) with potential for unambiguous single-molecule detection on the atomically well-defined layer of graphene.
△ Less
Submitted 6 June, 2013;
originally announced June 2013.
-
Graphene on silicon nitride for optoelectromechanical micromembrane resonators
Authors:
Silvan Schmid,
Tolga Bagci,
Emil Zeuthen,
Jacob M. Taylor,
Patrick K. Herring,
Maja C. Cassidy,
Charles M. Marcus,
Luis Guillermo Villanueva,
Bartolo Amato,
Anja Boisen,
Yong Cheol Shin,
Jing Kong,
Anders S. Sørensen,
Koji Usami,
Eugene S. Polzik
Abstract:
Due to their exceptional mechanical and optical properties, dielectric silicon nitride (SiN) micromembrane resonators have become the centerpiece of many optomechanical experiments. Efficient capacitive coupling of the membrane to an electrical system would facilitate exciting hybrid optoelectromechanical devices. However, capacitive coupling of such dielectric membranes is rather weak. Here we ad…
▽ More
Due to their exceptional mechanical and optical properties, dielectric silicon nitride (SiN) micromembrane resonators have become the centerpiece of many optomechanical experiments. Efficient capacitive coupling of the membrane to an electrical system would facilitate exciting hybrid optoelectromechanical devices. However, capacitive coupling of such dielectric membranes is rather weak. Here we add a single layer of graphene on SiN micromembranes and compare electromechanical coupling and mechanical properties to bare dielectric membranes and to membranes metallized with an aluminium layer. The electrostatic coupling of graphene coated membranes is found to be equal to a perfectly conductive membrane. Our results show that a single layer of graphene substantially enhances the electromechanical capacitive coupling without significantly adding mass, decreasing the superior mechanical quality factor or affecting the optical properties of SiN micromembrane resonators.
△ Less
Submitted 17 July, 2013; v1 submitted 25 May, 2013;
originally announced May 2013.
