Showing 1–8 of 8 results for author: Bohnen, K P

Pressure dependence of phonon modes across the tetragonal to collapsed tetragonal phase transition in CaFe2As2

Authors: R. Mittal, R. Heid, A. Bosak, T. R. Forrest, S. L. Chaplot, D. Lamago, D. Reznik, K. P. Bohnen, Y. Su, N. Kumar, S. K. Dhar, A. Thamizhavel, Ch. Ruegg, M. Krisch, D. F. McMorrow, Th. Brueckel, L. Pintschovius

Abstract: The pressure dependence of a large number of phonon modes in CaFe2As2 with energies covering the full range of the phonon spectrum has been studied using inelastic x-ray and neutron scattering. The observed phonon frequency changes are in general rather small despite the sizable changes of the lattice parameters at the phase transition. This indicates that the bonding properties are not profound… ▽ More The pressure dependence of a large number of phonon modes in CaFe2As2 with energies covering the full range of the phonon spectrum has been studied using inelastic x-ray and neutron scattering. The observed phonon frequency changes are in general rather small despite the sizable changes of the lattice parameters at the phase transition. This indicates that the bonding properties are not profoundly altered by the phase transition. The transverse acoustic phonons propagating along the c-direction are an exception because they stiffen very significantly in response to the large contraction of the c-axis. The lattice parameters are found to change significantly as a function of pressure before, during and after the first-order phase transition. However, the frequencies change nearly uniformly with the change in the lattice parameters due to pressure, with no regard specifically to the first-order phase transition. Density functional theory describes the frequencies in both the zero pressure and in the collapsed phase in a satisfactory way if based on the respective crystal structures. △ Less

Submitted 9 November, 2009; originally announced November 2009.

Journal ref: Phys. Rev. B 81, 144502 (2010)

Anomalous Phonons in CaFe2As2

Authors: R. Mittal, L. Pintschovius, D. Lamago, R. Heid, K. P. Bohnen, D. Reznik, S. L. Chaplot, Y. Su, N. Kumar, S. K. Dhar, A. Thamizhavel, Th. Brueckel

Abstract: Extensive inelastic neutron scattering measurements of phonons on a single crystal of CaFe2As2 allowed us to establish a fairly complete picture of phonon dispersions in the main symmetry directions. The phonon spectra were also calculated by density functional theory (DFT) in the local density approximation (LDA). There are serious discrepancies between calculations done for the optimized struc… ▽ More Extensive inelastic neutron scattering measurements of phonons on a single crystal of CaFe2As2 allowed us to establish a fairly complete picture of phonon dispersions in the main symmetry directions. The phonon spectra were also calculated by density functional theory (DFT) in the local density approximation (LDA). There are serious discrepancies between calculations done for the optimized structure and experiment, because the optimised structure is not the ambient pressure structure but is very close to the collapsed structure reached at p = 3.5 kbar. However, if the experimental crystal structure is used the calculation gives correct frequencies of most phonons. The most important new result is that linewidths/frequencies of certain modes are larger/softer than predicted by DFT-LDA. We also observed strong temperature dependence of some phonons near the structural phase transition near 173K. This behavior may indicate anomalously strong electron phonon coupling and/or anharmonicity, which may be important to the mechanism of superconductivity. △ Less

Submitted 8 May, 2009; v1 submitted 18 February, 2009; originally announced February 2009.

Comments: 12 pages, 3 figues Revised version, Final version, Accepted for publication in Physical Review Letters

Journal ref: Physical Review Letters 102, 217001 (2009)

A comparative study of the energetics of CO on stepped and kinked Cu surfaces using density functional theory

Authors: Faisal Mehmood, Abdelkader Kara, Talat S. Rahman, Klaus Peter Bohnen

Abstract: Our ab initio calculations of CO adsorption on several low and high miller index surfaces of Cu show that the adsorption energy increases as the coordination of the adsorption site decreases from 11 to 6, in qualitative agreement with experimental observations. On each surface the adsorption energy is also found to decrease with increase in coverage, although the decrement is not uniform. Calcul… ▽ More Our ab initio calculations of CO adsorption on several low and high miller index surfaces of Cu show that the adsorption energy increases as the coordination of the adsorption site decreases from 11 to 6, in qualitative agreement with experimental observations. On each surface the adsorption energy is also found to decrease with increase in coverage, although the decrement is not uniform. Calculated vibrational properties show an increase in the frequency of the metal-C mode with decrease in coordination whereas no such effect is found in the frequency of the CO stretch mode. Examination of the surface electronic structure shows a strong local effect of CO adsorption on the local density of state of the substrate atoms. We also provide some energetics of CO diffusion on Cu(111) and Cu(211). △ Less

Submitted 12 December, 2005; v1 submitted 29 November, 2005; originally announced November 2005.

Comments: 18 pages, 7 figures, separate pdf file for figure

First-principles calculations of the dispersion of surface phonons of the unreconstructed and reconstructed Pt(110)

Authors: Sampyo Hong, Talat S. Rahman, Rolf Heid, Klaus Peter Bohnen

Abstract: We present result of calculations of the surface phonon dispersion curves for Pt(110) using density functional theory in the local density approximation and norm conserving pseudopotentials in a mixed-basis approach. Linear response theory is invoked and both the unreconstructed, and the missing row (1x2) reconstructed surfaces are considered. We find that the reconstruction is not driven by a p… ▽ More We present result of calculations of the surface phonon dispersion curves for Pt(110) using density functional theory in the local density approximation and norm conserving pseudopotentials in a mixed-basis approach. Linear response theory is invoked and both the unreconstructed, and the missing row (1x2) reconstructed surfaces are considered. We find that the reconstruction is not driven by a phonon instability. Most of the observed phonon modes for the (1x2) structure can be understood in terms of simple folding of the (1x1) Brillouin zone onto that for the (1x2) surface. Largest changes in the phonon frequencies on surface reconstruction occur close to the zone boundary in the (001) direction. Detailed comparison of atomic force constants for the (1x1) and the (1x2) surfaces and their bulk counterparts show that the bulk value is attained after three layers. Our calculations reproduce nicely the Kohn anomaly observed along the (110) direction in the bulk. We do not find a corresponding effect on the surface. △ Less

Submitted 15 July, 2005; originally announced July 2005.

Insights from calculated phonon dispersion curves for an overlayer of H on Pt(111)

Authors: Sampyo Hong, Talat S. Rahman, Rolf Heid, Klaus Peter Bohnen

Abstract: We have calculated the dispersion curves of H vibrational modes on Pt(111), using first-principles, total energy calculations based on a mixed-basis set and norm-conserving pseudopotentials. Linear response theory and the harmonic approximation are invoked. For 1 ML coverage, H atoms are assumed to occupy the fcc hollow sites. At the Gamma point of the surface Brillouin zone, we find modes, resp… ▽ More We have calculated the dispersion curves of H vibrational modes on Pt(111), using first-principles, total energy calculations based on a mixed-basis set and norm-conserving pseudopotentials. Linear response theory and the harmonic approximation are invoked. For 1 ML coverage, H atoms are assumed to occupy the fcc hollow sites. At the Gamma point of the surface Brillouin zone, we find modes, respectively, polarized parallel and perpendicular to the surface at 73.5 meV and 142.6 meV. The degeneracy of the parallel mode is lifted at the zone boundaries, yielding modes at 69.6 meV and 86.3 meV, at the M point, and at 79.4 meV and 80.8 meV, at the K point. The substrate surface modes are also found to shift in frequencies from their calculated values for clean Pt(111). We discuss the details of the changes in surface force constant on H adsorption on Pt(111). We also consider the case of subsurface adsorption for 2 ML of H and present vibrational frequencies of H atoms adsorbed in several subsurface sites. The appearance of new vertically polarized modes in the range of 98 . 106 meV (octahedral site) and 124 . 162 meV (tetrahedral site) is discussed in the context of experimental data. △ Less

Submitted 14 July, 2005; originally announced July 2005.

First-principles calculations of the phonon dispersion curves of H on Pt(111)

Authors: Sampyo Hong, Talat S. Rahman, Rolf Heid, Klaus Peter Bohnen

Abstract: We have calculated the surface phonon dispersion curves for H on Pt(111), using first-principles, total energy calculations based on a mixed-basis set and norm-conserving pseudopotentials. Linear response theory and the harmonic approximation are invoked. For one monolayer of H in the preferred adsorption site (fcc hollow) vibrational modes polarized parallel and perpendicular to the surface are… ▽ More We have calculated the surface phonon dispersion curves for H on Pt(111), using first-principles, total energy calculations based on a mixed-basis set and norm-conserving pseudopotentials. Linear response theory and the harmonic approximation are invoked. For one monolayer of H in the preferred adsorption site (fcc hollow) vibrational modes polarized parallel and perpendicular to the surface are found, respectively, at 73.5 meV and 142.6 meV, at the Γ point of the surface Brillouin zone. The degeneracy of the parallel mode is lifted at the zone boundaries, yielding energies of 69.6 meV and 86.3 meV at the M point and 79.4 meV and 80.8 meV at the K point. The dispersion curves for H adsorption at the hcp hollow site differ only slightly from the above. In either case, H adsorption has considerable impact on the substrate modes; in particular the surface mode in the gap in the bulk phonon spectrum (around M point) is pushed into the bulk band. For on-top H adsorption, modes polarized parallel and perpendicular to the surface have respective energies of 47.4 meV and 277.2 meV, at the Γ point. The former disperses to 49.1 meV and 59.5 meV at the M point and to 56 meV and 56.7 meV at the K point. The H vibrational mode polarized perpendicular to the surface shows little dispersion, in all three cases considered. Insights are obtained from the hybridization of the H and Pt electronic states. △ Less

Submitted 5 January, 2005; originally announced January 2005.

Comments: 26 pages, 6 figures

Ab initio calculations of adsorbate-induced stress on Ni(100)

Authors: Sampyo Hong, Abdelkader Kara, Talat S. Rahman, Rolf Heid, Klaus Peter Bohnen

Abstract: We have calculated the surface stress induced on adsorption of c(2x2) overlayers of O and C, using first principles electronic structure calculations based on density functional theory within the local density approximation(LDA) and non-local pseudopotentials. Most remarkable result is found in the case of the C overlayer which introduces a large compressive stress, while that on clean Ni(100) a… ▽ More We have calculated the surface stress induced on adsorption of c(2x2) overlayers of O and C, using first principles electronic structure calculations based on density functional theory within the local density approximation(LDA) and non-local pseudopotentials. Most remarkable result is found in the case of the C overlayer which introduces a large compressive stress, while that on clean Ni(100) and that in the presence of the O overlayer are found to be tensile and smaller in comparison. We find a correlation between the height of the C overlayer and the resulting clock reconstruction of Ni(100) but no specific relationship between surface stress and surface reconstruction. We discuss our results in the context of experimental data, and insights from electronic structure calculations. △ Less

Submitted 20 May, 2004; originally announced May 2004.

Journal ref: Phys. Rev. B 69 (2004) 195403

Ab initio Calculations of Multilayer Relaxations of Stepped Cu Surfaces

Authors: Rolf Heid, Klaus Peter Bohnen, Abdelkader Kara, Talat S. Rahman

Abstract: We present trends in the multilayer relaxations of several vicinals of Cu(100) and Cu(111) of varying terrace widths and geometry. The electronic structure calculations are based on density functional theory in the local density approximation with norm-conserving, non-local pseudopotentials in the mixed basis representation. While relaxations continue for several layers, the major effect concent… ▽ More We present trends in the multilayer relaxations of several vicinals of Cu(100) and Cu(111) of varying terrace widths and geometry. The electronic structure calculations are based on density functional theory in the local density approximation with norm-conserving, non-local pseudopotentials in the mixed basis representation. While relaxations continue for several layers, the major effect concentrates near the step and corner atoms. On all surfaces the step atoms contract inwards, in agreement with experimental findings. Additionally, the corner atoms move outwards and the atoms in the adjacent chain undergo large inward relaxation. Correspondingly, the largest contraction (4%) is in the bond length between the step atom and its bulk nearest neighbor (BNN), while that between the corner atom and BNN is somewhat enlarged. The surface atoms also display changes in registry of upto 1.5%. Our results are in general in good agreement with LEED data including the controversial case of Cu(511). Subtle differences are found with results obtained from semi-empirical potentials. △ Less

Submitted 8 October, 2001; originally announced October 2001.

Comments: 21 pages and 3 figures