-
A Photonic Atom Probe coupling 3D Atomic Scale Analysis with in situ Photoluminescence Spectroscopy
Authors:
Jonathan Houard,
Antoine Normand,
Enrico Di Russo,
Christian Bacchi,
Pradip Dalapati,
Georges Beainy,
Simona Moldovan,
Gerald Da Costa,
Fabien Delaroche,
Charly Vaudolon,
Jean Michel Chauveau,
Maxime Hugues,
Didier Blavette,
Bernard Deconihout,
Angela Vella,
François Vurpillot,
Lorenzo Rigutti
Abstract:
Laser enhanced field evaporation of surface atoms in Laser-assisted Atom Probe Tomography (La-APT) can simultaneously excite phtotoluminescence in semiconductor or insulating specimens. An atom probe equipped with appropriate focalization and collection optics has been coupled with an in-situ micro-Photoluminescence (μPL) bench that can be operated during APT analysis. The Photonic Atom Probe inst…
▽ More
Laser enhanced field evaporation of surface atoms in Laser-assisted Atom Probe Tomography (La-APT) can simultaneously excite phtotoluminescence in semiconductor or insulating specimens. An atom probe equipped with appropriate focalization and collection optics has been coupled with an in-situ micro-Photoluminescence (μPL) bench that can be operated during APT analysis. The Photonic Atom Probe instrument we have developped operates at frequencies up to 500 kHz and is controlled by 150 fs laser pulses tunable in energy in a large spectral range (spanning from deep UV to near IR). Micro-PL spectroscopy is performed using a 320 mm focal length spectrometer equipped with a CCD camera for time-integrated and with a streak camera for time-resolved acquisitions. An exemple of application of this instrument on a multi-quantum well oxide heterostructure sample illustrates the potential of this new generation of tomographic atom probe.
△ Less
Submitted 23 July, 2020;
originally announced July 2020.
-
Intragranular nucleation of tetrahedral precipitates and discontinuous precipitation in Cu-5wt%Ag
Authors:
M. Bonvalet,
X. Sauvage,
D. Blavette
Abstract:
Both continuous and discontinuous precipitation is known to occur in CuAg alloys. The precipitation of Ag-rich phase has been experimentally investigated by atom probe tomography and transmission electron microscopy after ageing treatment of Cu-5%wtAg at 440$^\circ$C during 30'. Both continuously and discontinuously formed precipitates have been observed. The precipitates located inside the grains…
▽ More
Both continuous and discontinuous precipitation is known to occur in CuAg alloys. The precipitation of Ag-rich phase has been experimentally investigated by atom probe tomography and transmission electron microscopy after ageing treatment of Cu-5%wtAg at 440$^\circ$C during 30'. Both continuously and discontinuously formed precipitates have been observed. The precipitates located inside the grains exhibit two different faceted shapes: tetrahedral and platelet-shaped precipitates. Dislocations accommodating the high misfit at the interface between the two phases have also been evidenced. Based on these experimental observations, we examine the thermodynamic effect of these dislocations on the nucleation barrier and show that the peculiar shapes are due to the interfacial anisotropy. The appropriate number of misfit dislocations relaxes the elastic stress and lead to energetically favorable precipitates. However, due to the large misfit between the parent and precipitate phases, discontinuous precipitation that is often reported for CuAg alloys can be a lower energetic path to transform the supersaturated solid solution. We suggest that the presence of vacancy clusters may assist intragranular nucleation and decrease
△ Less
Submitted 7 May, 2020;
originally announced May 2020.
-
Atomic scale investigation of Cr precipitation in copper
Authors:
Abdelahad Chbihi,
Xavier Sauvage,
Didier Blavette
Abstract:
The early stage of the chromium precipitation in copper was analyzed at the atomic scale by Atom Probe Tomography (APT). Quantitative data about the precipitate size, 3D shape, density, composition and volume fraction were obtained in a Cu-1Cr-0.1Zr (wt.%) commercial alloy aged at 713K. Surprisingly, nanoscaled precipitates exhibit various shapes (spherical, plates and ellipsoid) and contain a lar…
▽ More
The early stage of the chromium precipitation in copper was analyzed at the atomic scale by Atom Probe Tomography (APT). Quantitative data about the precipitate size, 3D shape, density, composition and volume fraction were obtained in a Cu-1Cr-0.1Zr (wt.%) commercial alloy aged at 713K. Surprisingly, nanoscaled precipitates exhibit various shapes (spherical, plates and ellipsoid) and contain a large amount of Cu (up to 50%), in contradiction with the equilibrium Cu-Cr phase diagram. APT data also show that some impurities (Fe) may segregate along Cu/Cr interfaces. The concomitant evolution of the precipitate shape and composition as a function of the aging time is discussed. A special emphasis is given on the competition between interfacial and elastic energy and on the role of Fe segregation.
△ Less
Submitted 16 July, 2012;
originally announced July 2012.
-
Optimization of the magnetic properties of FePd alloys by severe plastic deformation
Authors:
Abdelahad Chbihi,
Xavier Sauvage,
Cécile Genevois,
Didier Blavette,
Dmitry Gunderov,
Alexander Popov
Abstract:
A FePd alloy was nanostructured by severe plastic deformation following two different routes: ordered and disordered states were processed by high pressure torsion (HPT). A grain size in a range of 50 to 150 nm is obtained in both cases. Severe plastic deformation induces some significant disordering of the long range ordered L10 phase. However, Transmission Electron Microscopy (TEM) data clearly…
▽ More
A FePd alloy was nanostructured by severe plastic deformation following two different routes: ordered and disordered states were processed by high pressure torsion (HPT). A grain size in a range of 50 to 150 nm is obtained in both cases. Severe plastic deformation induces some significant disordering of the long range ordered L10 phase. However, Transmission Electron Microscopy (TEM) data clearly show that few ordered nanocrystals remain in the deformed state. The deformed materials were annealed to achieve nanostructured long range ordered alloys. The transformation proceeds via a first order transition characterized by the nucleation of numerous ordered domains along grain boundaries. The influence of the annealing conditions (temperature and time) on the coercivity was studied for both routes. It is demonstrated that starting with the disorder state prior to HPT and annealing at low temperature (400\degree C) leads to the highest coercivity (about 1.8 kOe).
△ Less
Submitted 29 March, 2012;
originally announced March 2012.
-
An improved reconstruction procedure for the correction of local magnification effects in three-dimensional atom-probe
Authors:
F. De Geuser,
W. Lefebvre,
F. Danoix,
F. Vurpillot,
B. Forbord,
D. Blavette
Abstract:
A new 3DAP reconstruction procedure is proposed that accounts for the evaporation field of a secondary phase. It applies the existing cluster selection software to identify the atoms of the second phase and, subsequently, an iterative algorithm to homogenise the volume laterally. This Procedure, easily implementable on existing reconstruction software, has been applied successfully on simulated…
▽ More
A new 3DAP reconstruction procedure is proposed that accounts for the evaporation field of a secondary phase. It applies the existing cluster selection software to identify the atoms of the second phase and, subsequently, an iterative algorithm to homogenise the volume laterally. This Procedure, easily implementable on existing reconstruction software, has been applied successfully on simulated and real 3DAP analyses.
△ Less
Submitted 29 July, 2009;
originally announced July 2009.
