-
A nonlinear model of shearable elastic rod from an origami-like microstructure displaying folding and faulting
Authors:
M. Paradiso,
F. Dal Corso,
D. Bigoni
Abstract:
A new continuous model of shearable rod, subject to large elastic deformation, is derived from nonlinear homogenization of a one-dimensional periodic microstructured chain. As particular cases, the governing equations reduce to the Euler elastica and to the shearable elastica known as 'Engesser', that has been scarcely analysed so far. The microstructure that is homogenized is made up of elastic h…
▽ More
A new continuous model of shearable rod, subject to large elastic deformation, is derived from nonlinear homogenization of a one-dimensional periodic microstructured chain. As particular cases, the governing equations reduce to the Euler elastica and to the shearable elastica known as 'Engesser', that has been scarcely analysed so far. The microstructure that is homogenized is made up of elastic hinges and four-bar linkages, which may be realized in practice using origami joints. The equivalent continuous rod is governed by a Differential-Algebraic system of nonlinear Equations (DAE), containing an internal length ratio, and showing a surprisingly rich mechanical landscape, which involves a twin sequence of bifurcation loads, separated by a 'transition' mode. The latter occurs, for simply supported and cantilever rods in a 'bookshelf-like' mode and in a mode involving faulting (formation of a step in displacement), respectively. The postcritical response of the simply supported rod exhibits the emergence of folding, an infinite curvature occurring at a point of the rod axis, developing into a curvature jump at increasing load. Faulting and folding, excluded for both Euler and Reissner models and so far unknown in the rod theory, represent 'signatures' revealing the origami design of the microstructure. These two features are shown to be associated with bifurcations and, in particular folding, with a secondary bifurcation of the corresponding discrete chain when the number of elements is odd. Beside the intrinsic theoretical relevance to the field of structural mechanics, our results can be applied to various technological contexts involving highly compliant mechanisms, such as the achievement of objective trajectories with soft robot arms through folding and localized displacement of origami-inspired or multi-material mechanisms.
△ Less
Submitted 21 March, 2025;
originally announced March 2025.
-
Material instability and subsequent restabilization from homogenization of periodic elastic lattices
Authors:
Davide Bigoni,
Andrea Piccolroaz
Abstract:
Two classes of non-linear elastic materials are derived via two-dimensional homogenization. These materials are equivalent to a periodic grid of axially-deformable and axially-preloaded structural elements, subject to incremental deformations that involve bending, shear, and normal forces. The unit cell of one class is characterized by elements where deformations are lumped within a finite-degrees…
▽ More
Two classes of non-linear elastic materials are derived via two-dimensional homogenization. These materials are equivalent to a periodic grid of axially-deformable and axially-preloaded structural elements, subject to incremental deformations that involve bending, shear, and normal forces. The unit cell of one class is characterized by elements where deformations are lumped within a finite-degrees-of-freedom framework. In contrast, the other class involves smeared deformation, modelled as flexurally deformable rods with sufficiently high axial compliance. Under increasing compressive load, the elasticity tensor of the equivalent material loses positive definiteness and subsequently undergoes an ellipticity loss. Remarkably, in certain conditions, this loss of stability is followed by a subsequent restabilization; that is, the material re-enters the elliptic regime and even the positive definiteness domain and simultaneously, the underlying elastic lattice returns to a stable state. This effect is closely related to the axial compliance of the elements. Our results: (i.) demonstrate new possibilities for exploiting structural elements within the elastic range, characterized by a finite number of degrees of freedom, to create architected materials with tuneable instabilities, (ii.) introduce reconfigurable materials characterized by 'islands' of stability or instability.
△ Less
Submitted 24 March, 2025; v1 submitted 9 January, 2025;
originally announced January 2025.
-
Necking of thin-walled cylinders via bifurcation of incompressible nonlinear elastic solids
Authors:
Roberta Springhetti,
Gabriel Rossetto,
Davide Bigoni
Abstract:
Necking localization under quasi-static uniaxial tension is experimentally observed in ductile thin-walled cylindrical tubes, made of soft polypropylene. Necking nucleates at multiple locations along the tube and spreads throughout, involving higher-order modes, evidencing trefoil and fourthfoiled (but rarely even fifth-foiled) shaped cross-sections. No evidence of such a complicated necking occur…
▽ More
Necking localization under quasi-static uniaxial tension is experimentally observed in ductile thin-walled cylindrical tubes, made of soft polypropylene. Necking nucleates at multiple locations along the tube and spreads throughout, involving higher-order modes, evidencing trefoil and fourthfoiled (but rarely even fifth-foiled) shaped cross-sections. No evidence of such a complicated necking occurrence and growth was found in other ductile materials for thin-walled cylinders under quasi-static loading. With the aim of modelling this phenomenon, as well as all other possible bifurcations, a twodimensional formulation is introduced, in which only the mean surface of the tube is considered, paralleling the celebrated Flügge treatment of axially-compressed cylindrical shells. This treatment is extended to include tension and a broad class of nonlinear-hyperelastic constitutive law for the material, which is also assumed to be incompressible. The theoretical framework leads to a number of new results, not only for tensile axial force (where necking is modelled and, as a particular case, the classic Considère formula is shown to represent the limit of very thin tubes), but also for compressive force, providing closed-form formulae for wrinkling (showing that a direct application of the Flügge equation can be incorrect) and for Euler buckling. It is shown that the J2-deformation theory of plasticity (the simplest constitutive assumption to mimic through nonlinear elasticity the plastic branch of a material) captures multiple necking and occurrence of higher-order modes, so that experiments are explained. The presented results are important for several applications, ranging from aerospace and automotive engineering to the vascular mechanobiology, where a thin-walled tube (for instance an artery, or a catheter, or a stent) may become unstable not only in compression, but also in tension.
△ Less
Submitted 4 September, 2024;
originally announced September 2024.
-
Elastic solids under frictionless rigid contact and configurational force
Authors:
Francesco Dal Corso,
Marco Amato,
Davide Bigoni
Abstract:
A homogeneous elastic solid, bounded by a flat surface in its unstressed configuration, undergoes a finite strain when in frictionless contact against a rigid and rectilinear constraint, ending with a rounded or sharp corner, in a two-dimensional formulation. With a strong analogy to fracture mechanics, it is shown that (i.) a path-independent $J$--integral can be defined for frictionless contact…
▽ More
A homogeneous elastic solid, bounded by a flat surface in its unstressed configuration, undergoes a finite strain when in frictionless contact against a rigid and rectilinear constraint, ending with a rounded or sharp corner, in a two-dimensional formulation. With a strong analogy to fracture mechanics, it is shown that (i.) a path-independent $J$--integral can be defined for frictionless contact problems, (ii.) which is equal to the energy release rate $G$ associated with an infinitesimal growth in the size of the frictionless constraint, and thus gives the value of the configurational force component along the sliding direction. Furthermore, it is found that (iii.) such a configurational sliding force is the Newtonian force component exerted by the elastic solid on the constraint at the frictionless contact. Assuming the kinematics of an Euler-Bernoulli rod for an elastic body of rectangular shape, the results (i.)--(iii.) lead to a new interpretation from a nonlinear solid mechanics perspective of the configurational forces recently disclosed for one-dimensional structures of variable length. Finally, approximate but closed-form solutions (validated with finite element simulations) are exploited to provide further insight into the effect of configurational forces. In particular, two applications are presented which show that a transverse compression can lead to Eulerian buckling or to longitudinal dynamic motion, both realizing novel examples of soft actuation mechanisms. As an application to biology, our results may provide a mechanical explanation for the observed phenomenon of negative durotaxis, where cells migrate from stiffer to softer environments.
△ Less
Submitted 20 May, 2024;
originally announced May 2024.
-
Effects of prestress in the coating of an elastic disk
Authors:
Matteo Gaibotti,
Sofia G. Mogilevskaya,
Andrea Piccolroaz,
Davide Bigoni
Abstract:
An elastic disk is coated with an elastic rod, uniformly prestressed with a tensile or compressive axial force. The prestress state is assumed to be induced by three different models of external radial load or by 'shrink-fit' forcing the coating onto the disk. The prestressed coating/disk system, when loaded with an additional and arbitrary incremental external load, experiences incremental displa…
▽ More
An elastic disk is coated with an elastic rod, uniformly prestressed with a tensile or compressive axial force. The prestress state is assumed to be induced by three different models of external radial load or by 'shrink-fit' forcing the coating onto the disk. The prestressed coating/disk system, when loaded with an additional and arbitrary incremental external load, experiences incremental displacement, strain, and stress, which are solved via complex potentials. The analysis incorporates models for both perfect and imperfect bonding at the coating/disk interface. The derived solution highlights the significant influence not only of the prestress but also of the method employed to generate it. These two factors lead, in different ways, to a loss or an increase in incremental stiffness for compressive or tensile prestress. The first bifurcation load of the structure (which differs for different prestress generations) is determined in a perturbative way. The results emphasize the importance of modelling the load and may find applications in flexible electronics and robot arms subject to pressure or uniformly-distributed radial forces.
△ Less
Submitted 9 April, 2024;
originally announced April 2024.
-
Flutter instability in solids and structures, with a view on biomechanics and metamaterials
Authors:
Davide Bigoni,
Francesco Dal Corso,
Oleg N. Kirillov,
Diego Misseroni,
Giovanni Noselli,
Andrea Piccolroaz
Abstract:
The phenomenon of oscillatory instability called \lq flutter' was observed in aeroelasticity and rotor dynamics about a century ago. Driven by a series of applications involving nonconservative elasticity theory at different physical scales, ranging from nanomechanics to the mechanics of large space structures and including biomechanical problems of motility and growth, research on flutter is expe…
▽ More
The phenomenon of oscillatory instability called \lq flutter' was observed in aeroelasticity and rotor dynamics about a century ago. Driven by a series of applications involving nonconservative elasticity theory at different physical scales, ranging from nanomechanics to the mechanics of large space structures and including biomechanical problems of motility and growth, research on flutter is experiencing a new renaissance. A review is presented of the most notable applications and recent advances in fundamentals, both theoretical and experimental aspects, of flutter instability and Hopf bifurcation. Open problems, research gaps, and new perspectives for investigations are indicated.
△ Less
Submitted 13 January, 2024;
originally announced January 2024.
-
Phase-field modelling of failure in ceramics with multiscale porosity
Authors:
Riccardo Cavuoto,
Pietro Lenarda,
Anna Tampieri,
Davide Bigoni,
Marco Paggi
Abstract:
Many stiff biological materials exhibiting outstanding compressive strength/weight ratio are characterized by high porosity, spanning different size-scales, typical examples being bone and wood. A successful bio-mimicking of these materials is provided by a recently-obtained apatite, directly produced through a biomorphic transformation of natural wood and thus inheriting its highly hierarchical s…
▽ More
Many stiff biological materials exhibiting outstanding compressive strength/weight ratio are characterized by high porosity, spanning different size-scales, typical examples being bone and wood. A successful bio-mimicking of these materials is provided by a recently-obtained apatite, directly produced through a biomorphic transformation of natural wood and thus inheriting its highly hierarchical structure. This unique apatite (but also wood and bone) is characterized by two major distinct populations of differently-sized cylindrical voids, a porosity shown in the present paper to influence failure, both in terms of damage growth and fracture nucleation and propagation. This statement follows from failure analysis, developed through in-silico generation of artificial samples (reproducing the two-scale porosity of the material) and subsequent finite element modelling of damage, implemented with phase-field treatment for fracture growth. It is found that small voids promote damage nucleation and enhance bridging of macro-pores by micro-crack formation, while macro-pores influence the overall material response and drive the propagation of large fractures. Our results explain the important role of multiscale porosity characterizing stiff biological materials and lead to a new design paradigm, by introducing an in-silico tool to implement bio-mimicking in new artificial materials with brittle behaviour, such as carbide or ceramic foams.
△ Less
Submitted 26 May, 2023;
originally announced May 2023.
-
Configurational Forces in Penetration Processes
Authors:
Davide Bigoni,
Marco Amato,
Francesco Dal Corso
Abstract:
With a loose reference to problems of penetration in biomechanics (for instance, a nanoparticle penetrating through a cell's membrane or a cell sucked with a pipette), the role of configurational forces is investigated during the process in which a compliant intruder is inserted into an elastic structure. For insertion into a rigid constraint, a configurational force proportional to the square of…
▽ More
With a loose reference to problems of penetration in biomechanics (for instance, a nanoparticle penetrating through a cell's membrane or a cell sucked with a pipette), the role of configurational forces is investigated during the process in which a compliant intruder is inserted into an elastic structure. For insertion into a rigid constraint, a configurational force proportional to the square of the strain needed to deform the body, which is penetrating, is found. This force has a more complex structure when the compliance of the constraint is kept into account, but in all cases, it tends to expel the penetrating body.
△ Less
Submitted 22 November, 2022;
originally announced December 2022.
-
Configurational forces on elastic structures
Authors:
Davide Bigoni,
Federico Bosi,
Francesco Dal Corso,
Diego Misseroni
Abstract:
The discovery of configurational forces acting on elastic structures and its initial applications are reviewed. Configurational forces are related to the possibility that an elastic structure can change its configuration, thus inducing a variation in the potential energy. This concept has already led to several applications (the elastica arm scale, the dripping of an elastic rod, and the torsional…
▽ More
The discovery of configurational forces acting on elastic structures and its initial applications are reviewed. Configurational forces are related to the possibility that an elastic structure can change its configuration, thus inducing a variation in the potential energy. This concept has already led to several applications (the elastica arm scale, the dripping of an elastic rod, and the torsional actuator), has been shown to strongly affect stability, and to be related to limbless locomotion. It is believed that these results will open a new research territory in mechanics.
△ Less
Submitted 23 November, 2022;
originally announced November 2022.
-
Crack trajectories in materials containing voids via phase-field modelling
Authors:
Riccardo Cavuoto,
Pietro Lenarda,
Diego Misseroni,
Marco Paggi,
Davide Bigoni
Abstract:
Fracture growth in a material is strongly influenced by the presence of inhomogeneities, which deviate crack trajectories from rectilinearity and deeply affect failure. Increasing crack tortuosity is connected to enhancement of fracture toughness, while often a crack may even be stopped when it impinges a void, which releases the stress concentration. Therefore, the determination of crack trajecto…
▽ More
Fracture growth in a material is strongly influenced by the presence of inhomogeneities, which deviate crack trajectories from rectilinearity and deeply affect failure. Increasing crack tortuosity is connected to enhancement of fracture toughness, while often a crack may even be stopped when it impinges a void, which releases the stress concentration. Therefore, the determination of crack trajectories is important in the design against failure of materials and mechanical pieces. The recently developed phase-field approach (AT1 and AT2 models), based on a variational approach to damage localization, is believed to be particularly suited to describe complex crack trajectories. This belief is examined through a comparison between simulations and photoelastic experiments on PMMA plates, which have been designed in a new way, to highlight the effects of notches and circular holes on fracture propagation. The latter is shown to initiate from a notch and to be strongly attracted by voids. When a void is hit, fracture is arrested, unless the void contains a notch on its internal surface, from which a new crack nucleates and propagates. Different mechanical models are tested where fracture initiates and grows (i.) under Mode I compact tension, (ii.) four-point bending and (iii.) a tensile stress indirectly generated during compression of samples containing a circular hole. The experiments show that the fracture propagation may be designed to develop in different tortuous paths, involving multiple arrests and secondary nucleation. Simulations performed with an ad hoc implemented version of the AT1 and AT2 phase-field methods (equipped with spectral decomposition, in which a crack is simulated as a highly localized zone of damage accumulation) are shown to be in close agreement with experiments and therefore confirm the validity of the approach and its potentialities for mechanical design.
△ Less
Submitted 19 July, 2022;
originally announced July 2022.
-
Elastic disk with isoperimetric Cosserat coating
Authors:
Matteo Gaibotti,
Davide Bigoni,
Sofia G. Mogilevskaya
Abstract:
A circular elastic disk is coated with an elastic beam, absorbing shear and normal forces without deformation and linearly reacting to a bending moment with a change in curvature. The inexstensibility of the elastic beam introduces an isoperimetric constraint, so that the length of the initial circumference of the disk is constrained to remain fixed during the loading of the disk/coating system. T…
▽ More
A circular elastic disk is coated with an elastic beam, absorbing shear and normal forces without deformation and linearly reacting to a bending moment with a change in curvature. The inexstensibility of the elastic beam introduces an isoperimetric constraint, so that the length of the initial circumference of the disk is constrained to remain fixed during the loading of the disk/coating system. The mechanical model for this system is formulated, solved for general loading, and particularized to the case of two equal and opposite traction distributions, each applied on a small boundary segment (thus modelling indentation of a coated fiber). The stress fields, obtained via complex potentials, are shown to evidence a nice correspondence with photoelastic experiments, ad hoc designed and performed. The presented results are useful for the design of coated fibers at the micro and nano scales.
△ Less
Submitted 18 July, 2022;
originally announced July 2022.
-
Hierarchical porosity ihnerited by natural sources affects the mechanical and biological behaviour of bone scaffolds
Authors:
Simone Sprio,
Silvia Panseri,
Monica Montesi,
Massimiliano Dapporto,
Andrea Ruffini,
Samuele M. Dozio,
Riccardo Cavuoto,
Diego Misseroni,
Marco Paggi,
Davide Bigoni,
Anna Tampieri
Abstract:
A 3-D porous apatite scaffold (B-HA), recently obtained through biomorphic transformation of a natural wood, is investigated on its multi-scale porous structure determining superior mechanical properties and biological behaviour. B-HA shows hierarchical pore architecture with wide aligned channels interconnected with smaller tubules, thus recapitulating in detail the lymphatic network of the origi…
▽ More
A 3-D porous apatite scaffold (B-HA), recently obtained through biomorphic transformation of a natural wood, is investigated on its multi-scale porous structure determining superior mechanical properties and biological behaviour. B-HA shows hierarchical pore architecture with wide aligned channels interconnected with smaller tubules, thus recapitulating in detail the lymphatic network of the original wood template. As induced by its biomimetic architecture, B-HA displays values of compression and tensile strength and stiffness, higher than the values usually measured in sintered ceramics with isotropic porosity. Furthermore, B-HA shows a ductility not common for a pure ceramic body and a tensile strength higher than its compression strength, thus occupying a zone in the Ashby chart where ceramics are usually not present. Cell co-culture tests in bioreactor report encouraging results in enhancing the complex tissue regeneration process, thus making B-HA very promising as a scaffold able to promote bone regeneration, particularly for large bone defects.
△ Less
Submitted 24 June, 2021;
originally announced June 2021.
-
Nested Bloch waves in elastic structures with configurational forces
Authors:
Francesco Dal Corso,
Domenico Tallarico,
Natalia V. Movchan,
Alexander B. Movchan,
Davide Bigoni
Abstract:
Small axial and flexural oscillations are analyzed for a periodic and infinite structure, constrained by sliding sleeves and composed of elastic beams. A nested Bloch-Floquet technique is introduced to treat the non-linear coupling between longitudinal and transverse displacements induced by the configurational forces generated at the sliding sleeve ends. The action of configurational forces is sh…
▽ More
Small axial and flexural oscillations are analyzed for a periodic and infinite structure, constrained by sliding sleeves and composed of elastic beams. A nested Bloch-Floquet technique is introduced to treat the non-linear coupling between longitudinal and transverse displacements induced by the configurational forces generated at the sliding sleeve ends. The action of configurational forces is shown to play an important role from two perspectives. First, the band gap structure for purely longitudinal vibration is broken so that axial propagation may occur at frequencies that are forbidden in the absence of a transverse oscillation and, second, a flexural oscillation may induce axial resonance, a situation in which the longitudinal vibrations tend to become unbounded. The presented results disclose the possibility of exploiting configurational forces in the design of mechanical devices towards longitudinal actuation from flexural vibrations of small amplitude at given frequency.
△ Less
Submitted 5 August, 2019;
originally announced August 2019.
-
Asymptotic self-restabilization of a continuous elastic structure
Authors:
F. Bosi,
D. Misseroni,
F. Dal Corso,
S. Neukirch,
D. Bigoni
Abstract:
A challenge in soft robotics and soft actuation is the determination of an elastic system which spontaneously recovers its trivial path during postcritical deformation after a bifurcation. The interest in this behaviour is that a displacement component spontaneously cycles around a null value, thus producing a cyclic soft mechanism. An example of such a system is theoretically proven through the s…
▽ More
A challenge in soft robotics and soft actuation is the determination of an elastic system which spontaneously recovers its trivial path during postcritical deformation after a bifurcation. The interest in this behaviour is that a displacement component spontaneously cycles around a null value, thus producing a cyclic soft mechanism. An example of such a system is theoretically proven through the solution of the Elastica and a stability analysis based on dynamic perturbations. It is shown that the asymptotic self-restabilization is driven by the development of a configurational force, of similar nature to the Peach-Koehler interaction between dislocations in crystals, which is derived from the principle of least action. A proof-of-concept prototype of the discovered elastic system is designed, realized, and tested, showing that this innovative behaviour can be obtained in a real mechanical apparatus.
△ Less
Submitted 5 May, 2018;
originally announced May 2018.
-
Identification of higher-order continua equivalent to a Cauchy elastic composite
Authors:
A. Bacigalupo,
M. Paggi,
F. Dal Corso,
D. Bigoni
Abstract:
A heterogeneous Cauchy elastic material may display micromechanical effects that can be modeled in a homogeneous equivalent material through the introduction of higher-order elastic continua. Asymptotic homogenization techniques provide an elegant and rigorous route to the evaluation of equivalent higher-order materials, but are often of difficult and awkward practical implementation. On the other…
▽ More
A heterogeneous Cauchy elastic material may display micromechanical effects that can be modeled in a homogeneous equivalent material through the introduction of higher-order elastic continua. Asymptotic homogenization techniques provide an elegant and rigorous route to the evaluation of equivalent higher-order materials, but are often of difficult and awkward practical implementation. On the other hand, identification techniques, though relying on simplifying assumptions, are of straightforward use. A novel strategy for the identification of equivalent second-gradient Mindlin solids is proposed in an attempt to combine the accuracy of asymptotic techniques with the simplicity of identification approaches. Following the asymptotic homogenization scheme, the overall behaviour is defined via perturbation functions, which (differently from the asymptotic scheme) are evaluated on a finite domain obtained as the periodic repetition of cells and subject to quadratic displacement boundary conditions. As a consequence, the periodicity of the perturbation function is satisfied only in an approximate sense, nevertheless results from the proposed identification algorithm are shown to be reasonably accurate.
△ Less
Submitted 19 April, 2018;
originally announced April 2018.
-
Hypocycloidal Inclusions in Nonuniform Out-of-Plane Elasticity: Stress Singularity vs. Stress Reduction
Authors:
Summer Shahzad,
Francesco Dal Corso,
Davide Bigoni
Abstract:
Stress field solutions and Stress Intensity Factors (SIFs) are found for $n$-cusped hypocycloidal shaped voids and rigid inclusions in an infinite linear elastic plane subject to nonuniform remote antiplane loading, using complex potential and conformal mapping. It is shown that a void with hypocycloidal shape can lead to a higher SIF than that induced by a corresponding star-shaped crack; this is…
▽ More
Stress field solutions and Stress Intensity Factors (SIFs) are found for $n$-cusped hypocycloidal shaped voids and rigid inclusions in an infinite linear elastic plane subject to nonuniform remote antiplane loading, using complex potential and conformal mapping. It is shown that a void with hypocycloidal shape can lead to a higher SIF than that induced by a corresponding star-shaped crack; this is counter intuitive as the latter usually produces a more severe stress field in the material. Moreover, it is observed that when the order $m$ of the polynomial governing the remote loading grows, the stress fields generated by the hypocycloidal-shaped void and the star-shaped crack tend to coincide, so that they become equivalent from the point of view of a failure analysis. Finally, special geometries and loading conditions are discovered for which there is no stress singularity at the inclusion cusps and where the stress is even reduced with respect to the case of the absence of the inclusion. The concept of Stress Reduction Factor (SRF) in the presence of a sharp wedge is therefore introduced, contrasting with the well-known definition of Stress Concentration Factor (SCF) in the presence of inclusions with smooth boundary. The results presented in this paper provide criteria that will help in the design of ultra strong composite materials, where stress singularities always promote failure. Furthermore, they will facilitate finding the special conditions where resistance can be optimized in the presence of inclusions with non-smooth boundary.
△ Less
Submitted 23 January, 2017;
originally announced January 2017.
-
Application of Tomographic Reconstruction Techniques for Density Analysis of Green Bodies
Authors:
M. Scot Swan,
Andrea Piccolroaz,
Davide Bigoni
Abstract:
Progress in the manufacturing of ceramics, but also of sintered metals, strongly relies on the evaluation of the density distribution in green bodies. This evaluation is crucial from many points of view, including the calibration of constitutive models for \textit{in-silico} simulation of densification processes. To this end, X-ray tomography and other techniques are possible but can be unmanageab…
▽ More
Progress in the manufacturing of ceramics, but also of sintered metals, strongly relies on the evaluation of the density distribution in green bodies. This evaluation is crucial from many points of view, including the calibration of constitutive models for \textit{in-silico} simulation of densification processes. To this end, X-ray tomography and other techniques are possible but can be unmanageable for some institutions. Therefore, a destructive method is introduced in the present article to measure the density field of a green body sample using a CNC mill, an analytical balance, and analysis techniques from the field of computational tomography. A virtual experiment is presented where the method is used to reconstruct a simulated green body density field and is found to satisfactorily correspond to the original solution. The green body density field of a truncated cylinder made of alumina powder is evaluated using this method and the reconstructed field is presented.
△ Less
Submitted 10 November, 2016;
originally announced November 2016.
-
Isotoxal star-shaped polygonal voids and rigid inclusions in nonuniform antiplane shear fields. Part II: Singularities, annihilation and invisibility
Authors:
Francesco Dal Corso,
Summer Shahzad,
Davide Bigoni
Abstract:
Notch stress intensity factors and stress intensity factors are obtained analytically for isotoxal star-shaped polygonal voids and rigid inclusions (and also for the corresponding limit cases of star-shaped cracks and stiffeners), when loaded through remote inhomogeneous (self-equilibrated, polynomial) antiplane shear stress in an infinite linear elastic matrix. Usually these solutions show stress…
▽ More
Notch stress intensity factors and stress intensity factors are obtained analytically for isotoxal star-shaped polygonal voids and rigid inclusions (and also for the corresponding limit cases of star-shaped cracks and stiffeners), when loaded through remote inhomogeneous (self-equilibrated, polynomial) antiplane shear stress in an infinite linear elastic matrix. Usually these solutions show stress singularities at the inclusion corners. It is shown that an infinite set of geometries and loading conditions exist for which not only the singularity is absent, but the stress vanishes ('annihilates') at the corners. Thus the material, which even without the inclusion corners would have a finite stress, remains unstressed at these points in spite of the applied remote load. Moreover, similar conditions are determined in which a star-shaped crack or stiffener leaves the ambient stress completely unperturbed, thus reaching a condition of 'quasi-static invisibility'. Stress annihilation and invisibility define optimal loading modes for the overall strength of a composite and are useful for designing ultra-resistant materials.
△ Less
Submitted 24 March, 2016;
originally announced May 2016.
-
Isotoxal star-shaped polygonal voids and rigid inclusions in nonuniform antiplane shear fields. Part I: Formulation and full-field solution
Authors:
Francesco Dal Corso,
Summer Shahzad,
Davide Bigoni
Abstract:
An infinite class of nonuniform antiplane shear fields is considered for a linear elastic isotropic space and (non-intersecting) isotoxal star-shaped polygonal voids and rigid inclusions perturbing these fields are solved. Through the use of the complex potential technique together with the generalized binomial and the multinomial theorems, full-field closed-form solutions are obtained in the conf…
▽ More
An infinite class of nonuniform antiplane shear fields is considered for a linear elastic isotropic space and (non-intersecting) isotoxal star-shaped polygonal voids and rigid inclusions perturbing these fields are solved. Through the use of the complex potential technique together with the generalized binomial and the multinomial theorems, full-field closed-form solutions are obtained in the conformal plane. The particular (and important) cases of star-shaped cracks and rigid-line inclusions (stiffeners) are also derived. Except for special cases (addressed in Part II), the obtained solutions show singularities at the inclusion corners and at the crack and stiffener ends, where the stress blows-up to infinity, and is therefore detrimental to strength. It is for this reason that the closed-form determination of the stress field near a sharp inclusion or void is crucial for the design of ultra-resistant composites.
△ Less
Submitted 24 March, 2016;
originally announced April 2016.
-
Plastically-driven variation of elastic stiffness in green bodies during powder compaction. Part II: Micromechanical modelling
Authors:
L. P. Argani,
D. Misseroni,
A. Piccolroaz,
D. Capuani,
D. Bigoni
Abstract:
A micromechanical approach is set-up to analyse the increase in elastic stiffness related to development of plastic deformation (the elastoplastic coupling concept) occurring during the compaction of a ceramic powder. Numerical simulations on cubic (square for 2D) and hexagonal packings of elastoplastic cylinders and spheres validate both the variation of the elastic modulus with the forming press…
▽ More
A micromechanical approach is set-up to analyse the increase in elastic stiffness related to development of plastic deformation (the elastoplastic coupling concept) occurring during the compaction of a ceramic powder. Numerical simulations on cubic (square for 2D) and hexagonal packings of elastoplastic cylinders and spheres validate both the variation of the elastic modulus with the forming pressure and the linear dependence of it on the relative density as experimentally found in Part~I of this study, while the dependence of the Poisson's ratio on the green's density is only qualitatively explained.
△ Less
Submitted 28 November, 2015;
originally announced November 2015.
-
Plastically-driven variation of elastic stiffness in green bodies during powder compaction: Part I Experiments and elastoplastic coupling
Authors:
L. P. Argani,
D. Misseroni,
A. Piccolroaz,
Z. Vinco,
D. Capuani,
D. Bigoni
Abstract:
Cold compaction of ceramic powders is driven by plastic strain, during which the elastic stiffness of the material progressively increases from values typical of granular matter to those representative of a fully dense solid. This increase of stiffness strongly affects the mechanical behaviour of the green body and is crucial in the modelling of forming processes for ceramics. A protocol for ultra…
▽ More
Cold compaction of ceramic powders is driven by plastic strain, during which the elastic stiffness of the material progressively increases from values typical of granular matter to those representative of a fully dense solid. This increase of stiffness strongly affects the mechanical behaviour of the green body and is crucial in the modelling of forming processes for ceramics. A protocol for ultrasonic experimental investigation (via P and S waves transmission) is proposed to quantify the elastic constants (Young modulus and Poisson's ratio) as functions of the forming pressure. Experimental results performed in uniaxial strain allow for the introduction of laws that describe the variation of the elastic constants during densification. These laws are motivated in terms of elastoplastic coupling through the simulation of an isostatic pressure compaction process of alumina powder. A micromechanical explanation of the stiffening of elastic properties during densification is deferred to Part II of this study.
△ Less
Submitted 28 November, 2015;
originally announced November 2015.
-
Stress channelling in extreme couple-stress materials Part II: Localized folding vs faulting of a continuum in single and cross geometries
Authors:
Panos A. Gourgiotis,
Davide Bigoni
Abstract:
The antiplane strain Green's functions for an applied concentrated force and moment are obtained for Cosserat elastic solids with extreme anisotropy, which can be tailored to bring the material in a state close to an instability threshold such as failure of ellipticity. It is shown that the wave propagation condition (and not ellipticity) governs the behavior of the antiplane strain Green's functi…
▽ More
The antiplane strain Green's functions for an applied concentrated force and moment are obtained for Cosserat elastic solids with extreme anisotropy, which can be tailored to bring the material in a state close to an instability threshold such as failure of ellipticity. It is shown that the wave propagation condition (and not ellipticity) governs the behavior of the antiplane strain Green's functions. These Green's functions are used as perturbing agents to demonstrate in an extreme material the emergence of localized (single and cross) stress channelling and the emergence of antiplane localized folding (or creasing, or weak elastostatic shock) and faulting (or elastostatic shock) of a Cosserat continuum, phenomena which remain excluded for a Cauchy elastic material. During folding some components of the displacement gradient suffer a finite jump, whereas during faulting the displacement itself displays a finite discontinuity.
△ Less
Submitted 23 September, 2015;
originally announced September 2015.
-
An Elastica Arm Scale
Authors:
F. Bosi,
D. Misseroni,
F. Dal Corso,
D. Bigoni
Abstract:
The concept of 'deformable arm scale' (completely different from a traditional rigid arm balance) is theoretically introduced and experimentally validated. The idea is not intuitive, but is the result of nonlinear equilibrium kinematics of rods inducing configurational forces, so that deflection of the arms becomes necessary for the equilibrium, which would be impossible for a rigid system. In par…
▽ More
The concept of 'deformable arm scale' (completely different from a traditional rigid arm balance) is theoretically introduced and experimentally validated. The idea is not intuitive, but is the result of nonlinear equilibrium kinematics of rods inducing configurational forces, so that deflection of the arms becomes necessary for the equilibrium, which would be impossible for a rigid system. In particular, the rigid arms of usual scales are replaced by a flexible elastic lamina, free of sliding in a frictionless and inclined sliding sleeve, which can reach a unique equilibrium configuration when two vertical dead loads are applied. Prototypes realized to demonstrate the feasibility of the system show a high accuracy in the measure of load within a certain range of use. It is finally shown that the presented results are strongly related to snaking of confined beams, with implications on locomotion of serpents, plumbing, and smart oil drilling.
△ Less
Submitted 18 September, 2015;
originally announced September 2015.
-
The deformation of an elastic rod with a clamp sliding along a smooth and curved profile
Authors:
D. Misseroni,
G. Noselli,
D. Zaccaria,
D. Bigoni
Abstract:
The design of compliant mechanisms is crucial in several technologies and relies on the availability of solutions for nonlinear structural problems. One of these solutions is given and experimentally validated in the present article for a compliant mechanism moving along a smooth curved profile. In particular, a deformable elastic rod is held by two clamps, one at each end. The first clamp is cons…
▽ More
The design of compliant mechanisms is crucial in several technologies and relies on the availability of solutions for nonlinear structural problems. One of these solutions is given and experimentally validated in the present article for a compliant mechanism moving along a smooth curved profile. In particular, a deformable elastic rod is held by two clamps, one at each end. The first clamp is constrained to slide without friction along a curved profile, while the second clamp moves in a straight line transmitting its motion through the elastic rod to the first clamp. For this system it is shown that the clamp sliding on the profile imposes nontrivial boundary conditions (derived via a variational and an asymptotic approach), which strongly influence buckling and nonlinear structural behaviour. Investigation of this behaviour shows that a compliant mechanism can be designed, which gives an almost neutral response in compression. This behavior could easily be exploited to make a force limiting device. Finally a proof-of-concept device was constructed and tested showing that the analyzed mechanical system can be realized in practice and it behaves tightly to the model, so that it can now be used in the design of machines that use compliant mechanisms.
△ Less
Submitted 18 September, 2015;
originally announced September 2015.
-
Development of configurational forces during the injection of an elastic rod
Authors:
F. Bosi,
D. Misseroni,
F. Dal Corso,
D. Bigoni
Abstract:
When an inextensible elastic rod is 'injected' through a sliding sleeve against a fixed constraint, configurational forces are developed, deeply influencing the mechanical response. This effect, which is a consequence of the change in length of the portion of the rod included between the sliding sleeve and the fixed constraint, is theoretically demonstrated (via integration of the elastica) and ex…
▽ More
When an inextensible elastic rod is 'injected' through a sliding sleeve against a fixed constraint, configurational forces are developed, deeply influencing the mechanical response. This effect, which is a consequence of the change in length of the portion of the rod included between the sliding sleeve and the fixed constraint, is theoretically demonstrated (via integration of the elastica) and experimentally validated on a proof-of-concept structure (displaying an interesting force reversal in the load/deflection diagram), to provide conclusive evidence to mechanical phenomena relevant in several technologies, including guide wire for artery catheterization, or wellbore insertion of a steel pipe.
△ Less
Submitted 18 September, 2015;
originally announced September 2015.
-
Experimental and analytical insights on fracture trajectories in brittle materials with voids
Authors:
D. Misseroni,
A. B. Movchan,
N. V. Movchan,
D. Bigoni
Abstract:
Analytical models have been developed for fracture propagation over the last several decades and are now considered with renewed interest; the range of their applicability varies for different materials and different loading conditions. Systematic experimental measurements and numerical simulations are presented against an asymptotic prediction for the crack trajectory developing in solids with sm…
▽ More
Analytical models have been developed for fracture propagation over the last several decades and are now considered with renewed interest; the range of their applicability varies for different materials and different loading conditions. Systematic experimental measurements and numerical simulations are presented against an asymptotic prediction for the crack trajectory developing in solids with small voids (of circular and elliptical shape). The experiments also cover the dynamic regime, where new features involving crack kinking and roughness of the fracture surface occur.
△ Less
Submitted 18 September, 2015;
originally announced September 2015.
-
Strain localization and shear banding in ductile materials
Authors:
N. Bordignon,
A. Piccolroaz,
F. Dal Corso,
D. Bigoni
Abstract:
A model of a shear band as a zero-thickness nonlinear interface is proposed and tested using finite element simulations. An imperfection approach is used in this model where a shear band, that is assumed to lie in a ductile matrix material (obeying von Mises plasticity with linear hardening), is present from the beginning of loading and is considered to be a zone in which yielding occurs before th…
▽ More
A model of a shear band as a zero-thickness nonlinear interface is proposed and tested using finite element simulations. An imperfection approach is used in this model where a shear band, that is assumed to lie in a ductile matrix material (obeying von Mises plasticity with linear hardening), is present from the beginning of loading and is considered to be a zone in which yielding occurs before the rest of the matrix. This approach is contrasted with a perturbative approach, developed for a J$_2$-deformation theory material, in which the shear band is modelled to emerge at a certain stage of a uniform deformation. Both approaches concur in showing that the shear bands (differently from cracks) propagate rectilinearly under shear loading and that a strong stress concentration should be expected to be present at the tip of the shear band, two key features in the understanding of failure mechanisms of ductile materials.
△ Less
Submitted 24 January, 2015;
originally announced January 2015.
-
Experimental investigation of the elastoplastic response of aluminum silicate spray dried powder during cold compaction
Authors:
F. Bosi,
A. Piccolroaz,
M. Gei,
F. Dal Corso,
A. Cocquio,
D. Bigoni
Abstract:
Mechanical experiments have been designed and performed to investigate the elasto-plastic behaviour of green bodies formed from an aluminum silicate spray dried powder used for tiles production. Experiments have been executed on samples obtained from cold compaction into a cylindrical mould and include: uniaxial strain, equi-biaxial flexure and high-pressure triaxial compression/extension tests. T…
▽ More
Mechanical experiments have been designed and performed to investigate the elasto-plastic behaviour of green bodies formed from an aluminum silicate spray dried powder used for tiles production. Experiments have been executed on samples obtained from cold compaction into a cylindrical mould and include: uniaxial strain, equi-biaxial flexure and high-pressure triaxial compression/extension tests. Two types of powders have been used to realize the green body samples, differing in the values of water content, which have been taken equal to those usually employed in the industrial forming of traditional ceramics. Yielding of the green body during compaction has been characterized in terms of yield surface shape, failure envelope, and evolution of cohesion and void ratio with the forming pressure, confirming the validity of previously proposed constitutive models for dense materials obtained through cold compaction of granulates.
△ Less
Submitted 5 May, 2014;
originally announced May 2014.
-
Finite-strain formulation and FE implementation of a constitutive model for powder compaction
Authors:
S. Stupkiewicz,
A. Piccolroaz,
D. Bigoni
Abstract:
A finite-strain formulation is developed, implemented and tested for a constitutive model capable of describing the transition from granular to fully dense state during cold forming of ceramic powder. This constitutive model (as well as many others employed for geomaterials) embodies a number of features, such as pressure-sensitive yielding, complex hardening rules and elastoplastic coupling, posi…
▽ More
A finite-strain formulation is developed, implemented and tested for a constitutive model capable of describing the transition from granular to fully dense state during cold forming of ceramic powder. This constitutive model (as well as many others employed for geomaterials) embodies a number of features, such as pressure-sensitive yielding, complex hardening rules and elastoplastic coupling, posing considerable problems in a finite-strain formulation and numerical implementation. A number of strategies are proposed to overcome the related problems, in particular, a neo-Hookean type of modification to the elastic potential and the adoption of the second Piola-Kirchhoff stress referred to the intermediate configuration to describe yielding. An incremental scheme compatible with the formulation for elastoplastic coupling at finite strain is also developed, and the corresponding constitutive update problem is solved by applying a return mapping algorithm.
△ Less
Submitted 1 May, 2014;
originally announced May 2014.
-
Implicit yield function formulation for granular and rock-like materials
Authors:
S. Stupkiewicz,
R. Denzer,
A. Piccolroaz,
D. Bigoni
Abstract:
The constitutive modelling of granular, porous and quasi-brittle materials is based on yield (or damage) functions, which may exhibit features (for instance, lack of convexity, or branches where the values go to infinity, or false elastic domains) preventing the use of efficient return-mapping integration schemes. This problem is solved by proposing a general construction strategy to define an imp…
▽ More
The constitutive modelling of granular, porous and quasi-brittle materials is based on yield (or damage) functions, which may exhibit features (for instance, lack of convexity, or branches where the values go to infinity, or false elastic domains) preventing the use of efficient return-mapping integration schemes. This problem is solved by proposing a general construction strategy to define an implicitly defined convex yield function starting from any convex yield surface. Based on this implicit definition of the yield function, a return-mapping integration scheme is implemented and tested for elastic-plastic (or -damaging) rate equations. The scheme is general and, although it introduces a numerical cost when compared to situations where the scheme is not needed, is demonstrated to perform correctly and accurately.
△ Less
Submitted 23 September, 2014; v1 submitted 1 May, 2014;
originally announced May 2014.
-
Elastoplastic coupling to model cold ceramic powder compaction
Authors:
S. Stupkiewicz,
A. Piccolroaz,
D. Bigoni
Abstract:
The simulation of industrial processes involving cold compaction of powders allows for the optimization of the production of both traditional and advanced ceramics. The capabilities of a constitutive model previously proposed by the authors are explored to simulate simple forming processes, both in the small and in the large strain formulation. The model is based on the concept of elastoplastic co…
▽ More
The simulation of industrial processes involving cold compaction of powders allows for the optimization of the production of both traditional and advanced ceramics. The capabilities of a constitutive model previously proposed by the authors are explored to simulate simple forming processes, both in the small and in the large strain formulation. The model is based on the concept of elastoplastic coupling providing a relation between density changes and variation of elastic properties and has been tailored to describe the transition between a granular ceramic powder and a dense green body. Finite element simulations have been compared with experiments on an alumina ready-to-press powder and an aluminum silicate spray-dried granulate. The simulations show that it is possible to take into account friction at the die wall and to predict the state of residual stress, density distribution and elastic properties in the green body at the end of the forming process.
△ Less
Submitted 29 April, 2014;
originally announced April 2014.
-
Integration algorithms of elastoplasticity for ceramic powder compaction
Authors:
M. Penasa,
A. Piccolroaz,
L. Argani,
D. Bigoni
Abstract:
Inelastic deformation of ceramic powders (and of a broad class of rock-like and granular materials), can be described with the yield function proposed by Bigoni and Piccolroaz (2004, Yield criteria for quasibrittle and frictional materials. Int. J. Solids and Structures, 41, 2855-2878). This yield function is not defined outside the yield locus, so that 'gradient-based' integration algorithms of e…
▽ More
Inelastic deformation of ceramic powders (and of a broad class of rock-like and granular materials), can be described with the yield function proposed by Bigoni and Piccolroaz (2004, Yield criteria for quasibrittle and frictional materials. Int. J. Solids and Structures, 41, 2855-2878). This yield function is not defined outside the yield locus, so that 'gradient-based' integration algorithms of elastoplasticity cannot be directly employed. Therefore, we propose two ad hoc algorithms: (i.) an explicit integration scheme based on a forward Euler technique with a 'centre-of-mass' return correction and (ii.) an implicit integration scheme based on a 'cutoff-substepping' return algorithm. Iso-error maps and comparisons of the results provided by the two algorithms with two exact solutions (the compaction of a ceramic powder against a rigid spherical cup and the expansion of a thick spherical shell made up of a green body), show that both the proposed algorithms perform correctly and accurately.
△ Less
Submitted 24 April, 2014;
originally announced April 2014.
-
A simple and robust elastoplastic constitutive model for concrete
Authors:
F. Poltronieri,
A. Piccolroaz,
D. Bigoni
Abstract:
An elasto-plastic model for concrete, based on a recently-proposed yield surface and simple hardening laws, is formulated, implemented, numerically tested and validated against available test results. The yield surface is smooth and particularly suited to represent the behaviour of rock-like materials, such as concrete, mortar, ceramic and rock. A new class of isotropic hardening laws is proposed,…
▽ More
An elasto-plastic model for concrete, based on a recently-proposed yield surface and simple hardening laws, is formulated, implemented, numerically tested and validated against available test results. The yield surface is smooth and particularly suited to represent the behaviour of rock-like materials, such as concrete, mortar, ceramic and rock. A new class of isotropic hardening laws is proposed, which can be given both an incremental and the corresponding finite form. These laws describe a smooth transition from linear elastic to plastic behaviour, incorporating linear and nonlinear hardening, and may approach the perfectly plastic limit in the latter case. The reliability of the model is demonstrated by its capability of correctly describing the results yielded by a number of well documented triaxial tests on concrete subjected to various confinement levels. Thanks to its simplicity, the model turns out to be very robust and well suited to be used in complex design situations, as those involving dynamic loads.
△ Less
Submitted 24 April, 2014;
originally announced April 2014.
-
Eshelby-like forces acting on elastic structures: theoretical and experimental proof
Authors:
Davide Bigoni,
Francesco Dal Corso,
Federico Bosi,
Diego Misseroni
Abstract:
The Eshelbian (or configurational) force is the main concept of a celebrated theoretical framework associated with the motion of dislocations and, more in general, defects in solids. In a similar vein, in an elastic structure where a (smooth and bilateral) constraint can move and release energy, a force driving the configuration is generated, which therefore is called by analogy 'Eshelby-like' or…
▽ More
The Eshelbian (or configurational) force is the main concept of a celebrated theoretical framework associated with the motion of dislocations and, more in general, defects in solids. In a similar vein, in an elastic structure where a (smooth and bilateral) constraint can move and release energy, a force driving the configuration is generated, which therefore is called by analogy 'Eshelby-like' or 'configurational'. This force (generated by a specific movable constraint) is derived both via variational calculus and, independently, through an asymptotic approach. Its action on the elastic structure is counterintuitive, but is fully substantiated and experimentally measured on a model structure that we have designed, realized and tested. These findings open a totally new perspective in the mechanics of deformable mechanisms, with possible broad applications, even at the nanoscale.
△ Less
Submitted 3 April, 2014; v1 submitted 10 September, 2013;
originally announced September 2013.
-
Stress concentration near stiff inclusions: validation of rigid inclusion model and boundary layers by means of photoelasticity
Authors:
Diego Misseroni,
Francesco Dal Corso,
Summer Shahzad,
Davide Bigoni
Abstract:
Photoelasticity is employed to investigate the stress state near stiff rectangular and rhombohedral inclusions embedded in a 'soft' elastic plate. Results show that the singular stress field predicted by the linear elastic solution for the rigid inclusion model can be generated in reality, with great accuracy, within a material. In particular, experiments: (i.) agree with the fact that the singula…
▽ More
Photoelasticity is employed to investigate the stress state near stiff rectangular and rhombohedral inclusions embedded in a 'soft' elastic plate. Results show that the singular stress field predicted by the linear elastic solution for the rigid inclusion model can be generated in reality, with great accuracy, within a material. In particular, experiments: (i.) agree with the fact that the singularity is lower for obtuse than for acute inclusion angles; (ii.) show that the singularity is stronger in Mode II than in Mode I (differently from a notch); (iii.) validate the model of rigid quadrilateral inclusion; (iv.) for thin inclusions, show the presence of boundary layers deeply influencing the stress field, so that the limit case of rigid line inclusion is obtained in strong dependence on the inclusion's shape. The introduced experimental methodology opens the possibility of enhancing the design of thin reinforcements and of analyzing complex situations involving interaction between inclusions and defects.
△ Less
Submitted 3 April, 2014; v1 submitted 4 September, 2013;
originally announced September 2013.
-
Anisotropic effective higher-order response of heterogeneous Cauchy elastic materials
Authors:
Mattia Bacca,
Francesco Dal Corso,
Daniele Veber,
Davide Bigoni
Abstract:
The homogenization results obtained by Bacca et al. (Homogenization of heterogeneous Cauchy-elastic materials leads to Mindlin second-gradient elasticity. Part I: Closed form expression for the effective higher-order constitutive tensor. arXiv:1305.2365 Submitted, 2013), to define effective second-gradient elastic materials from heterogeneous Cauchy elastic solids, are extended here to the case of…
▽ More
The homogenization results obtained by Bacca et al. (Homogenization of heterogeneous Cauchy-elastic materials leads to Mindlin second-gradient elasticity. Part I: Closed form expression for the effective higher-order constitutive tensor. arXiv:1305.2365 Submitted, 2013), to define effective second-gradient elastic materials from heterogeneous Cauchy elastic solids, are extended here to the case of phases having non-isotropic tensors of inertia. It is shown that the nonlocal constitutive tensor for the homogenized material depends on both the inertia properties of the RVE and the difference between the effective and the matrix local elastic tensors. Results show that: (i.) a composite material can be designed to result locally isotropic but nonlocally orthotropic; (ii.) orthotropic nonlocal effects are introduced when a dilute distribution of aligned elliptical holes and, in the limit case, of cracks is homogenized.
△ Less
Submitted 3 June, 2013;
originally announced June 2013.
