-
$3d$ flat bands and coupled $4f$ moments in the kagome-honeycomb permanent magnet Sm$_{2}$Co$_{17}$
Authors:
Hao Zheng,
Zhiguang Xiao,
Ze Pan,
Guowei Yang,
Yonghao Liu,
Jianzhou Bian,
Yi Wu,
Teng Hua,
Jiawen Zhang,
Jiayi Lu,
Jiong Li,
Tulai Sun,
Yu Song,
Ruihua He,
J. Larrea Jiménez,
Guanghan Cao,
Huiqiu Yuan,
Yuanfeng Xu,
Yi Yin,
Ming Shi,
Chao Cao,
Yang Liu
Abstract:
Rare earth permanent magnets (REPMs) with both localized moments and itinerant conduction bands are not only important for fundamental research but also have significant technological applications. In particular, Sm$_{\rm 2}$Co$_{\rm 17}$ is a prototypical high-temperture REPM, where the Co atoms form a kagome-honeycomb stacked lattice. Here we report synthesis of epitaxial Sm$_{\rm 2}$Co…
▽ More
Rare earth permanent magnets (REPMs) with both localized moments and itinerant conduction bands are not only important for fundamental research but also have significant technological applications. In particular, Sm$_{\rm 2}$Co$_{\rm 17}$ is a prototypical high-temperture REPM, where the Co atoms form a kagome-honeycomb stacked lattice. Here we report synthesis of epitaxial Sm$_{\rm 2}$Co$_{\rm 17}$ films using molecular beam epitaxy and measurements of their momentum-resolved electronic structure from \textit{in-situ} angle-resolved photoemission spectroscopy. Our results unveil two flat bands from Co $3d$ orbitals near the Fermi level ($E_F$), one at $\sim$\,--300\,meV and another right at $E_F$, which arise from orbital-selective destructive interference and strong electron correlations, respectively. In addition, our results reveal that Sm $4f$ states are far away from $E_F$ (hence mostly localized) and exhibit an anomalous temperature dependence, caused by the $3d$-$4f$ magnetic coupling. Our findings provide direct spectroscopic insights to understand the strong uniaxial ferromagnetism in Sm$_{\rm 2}$Co$_{\rm 17}$ (and REPMs alike). Our work also opens avenues to explore flat-band physics near $E_F$ and emergent phenomena in correlated kagome-honeycomb lattices.
△ Less
Submitted 19 May, 2025; v1 submitted 17 March, 2025;
originally announced March 2025.
-
Electrified Fracture of Nanotube Films
Authors:
Jinbo Bian,
Shijun Wang,
Zhaokuan Yu,
Zhong Zhang,
Zhiping Xu
Abstract:
Strong and conductive carbon nanotube films are ideal candidates for lightning-strike protection. Understanding their failure mechanisms by considering the anisotropic and single-fiber nature is essential to improve performance. Our experimental studies show that the single-layer, nanometer-thick films fail under electrification by crack nucleation and propagation, reminiscent of brittle and ducti…
▽ More
Strong and conductive carbon nanotube films are ideal candidates for lightning-strike protection. Understanding their failure mechanisms by considering the anisotropic and single-fiber nature is essential to improve performance. Our experimental studies show that the single-layer, nanometer-thick films fail under electrification by crack nucleation and propagation, reminiscent of brittle and ductile fracture of materials under mechanical loads. Sharp and diffuse patterns of fracture are identified in aligned and non-woven films, respectively, signaling the strong effect of material anisotropy that is absent in common engineering materials. The fracture is driven by local Joule heating concentrated at the crack fronts instead of force-induced breakage, which is validated by experimental characterization and simulation results at both continuum and atomistic levels.
△ Less
Submitted 22 November, 2023;
originally announced November 2023.
-
A semi-analytical model for the scale-dependent friction of nanosized asperity
Authors:
Jian Wang,
Weike Yuan,
Jianjun Bian,
Gangfeng Wang
Abstract:
The friction of a nanosized sphere in commensurate contact with a flat substrate is investigated by performing molecular dynamics simulations. Particular focus is on the distribution of shear stress within the contact region. It is noticed that within the slip zone, the local friction coefficient defined by the ratio of shear stress to normal pressure declines monotonically as the distance to cont…
▽ More
The friction of a nanosized sphere in commensurate contact with a flat substrate is investigated by performing molecular dynamics simulations. Particular focus is on the distribution of shear stress within the contact region. It is noticed that within the slip zone, the local friction coefficient defined by the ratio of shear stress to normal pressure declines monotonically as the distance to contact center increases. With the lateral force increasing, the slip zone expands inwards from the contact edge. At the same time, the local friction coefficient at the contact edge decreases continuously, while at the dividing between the slip and stick zones keeps nearly invariant. These characteristics are distinctly different from the prediction of the conventional Cattaneo-Mindlin model assuming a constant local friction coefficient within the slip zone. An analytical model is advanced in view of such new features and generalized based on numerous atomic simulations. This model not only accurately characterizes the interfacial shear stress, but also explains the size-dependence of static friction of single nanosized asperity.
△ Less
Submitted 28 June, 2020;
originally announced July 2020.
-
Statistical characterization of the yield stress of nanoparticles
Authors:
Liang Yang,
Jianjun Bian,
Weike Yuan,
Gangfeng Wang
Abstract:
Atomistic simulations are performed to study the statistical mechanical property of gold nanoparticles. It is demonstrated that the yielding behavior of gold nanoparticles is governed by dislocation nucleation around surface steps. Since the nucleation of dislocations is an activated process with the aid of thermal fluctuation, the yield stress at a specific temperature should exhibit a statistica…
▽ More
Atomistic simulations are performed to study the statistical mechanical property of gold nanoparticles. It is demonstrated that the yielding behavior of gold nanoparticles is governed by dislocation nucleation around surface steps. Since the nucleation of dislocations is an activated process with the aid of thermal fluctuation, the yield stress at a specific temperature should exhibit a statistical distribution rather than a definite constant value. Molecular dynamics simulations reveal that the yield stress follows a Gaussian distribution at a specific temperature. As the temperature increases, the mean value of yield stress decreases while the width of distribution becomes larger. Based on numerical analysis, the dependence of the mean yield stress on temperature can be well described by a parabolic function. Present study illuminates the statistical features of the yielding behavior of nanostructured elements.
△ Less
Submitted 20 December, 2019;
originally announced December 2019.
-
Coherence induced work in quantum heat engines with Larmor precession
Authors:
Shanhe Su,
Wei Shen,
Jincan Chen,
Ran Liu,
Min Jiang,
Ji Bian,
Xinhua Peng
Abstract:
The impacts of quantum coherence on nonequilibrium thermodynamics become observable by dividing the heat and work into the conventional diagonal part and the other part relaying on the superpositions and the time derivative of Hamiltonian. Specializing to exactly-solvable dynamics of Larmor precession, we build a quantum Otto heat engine employing magnetic-driven atomic rotations. The coherence in…
▽ More
The impacts of quantum coherence on nonequilibrium thermodynamics become observable by dividing the heat and work into the conventional diagonal part and the other part relaying on the superpositions and the time derivative of Hamiltonian. Specializing to exactly-solvable dynamics of Larmor precession, we build a quantum Otto heat engine employing magnetic-driven atomic rotations. The coherence induced by the population transition guarantees the positive work output when the control protocol is time dependent. The time-dependent control of a quantum heat engine implements the correspondence between the classical and quantum adiabatic theorems for microscopic heat machines.
△ Less
Submitted 7 April, 2020; v1 submitted 18 August, 2019;
originally announced August 2019.
-
Plate-like precipitate effects on plasticity of Al-Cu micro-pillar: {100}-interfacial slip
Authors:
Peng Zhang,
Jian-Jun Bian,
Chong Yang,
Jin-Yu Zhang,
Gang Liu,
Jérôme Weiss,
Jun Sun
Abstract:
In this paper, we study the effects of $θ^\prime$-Al$_2$Cu plate-like precipitates on the plasticity of Al-Cu micro-pillars, with a sample size allowing the precipitates to cross the entire micro-pillar. {100}-slip traces are identified for the first time in Al and Al alloys at room temperature. We investigate the underlying mechanisms of this unusual {100}-slip, and show that it operates along th…
▽ More
In this paper, we study the effects of $θ^\prime$-Al$_2$Cu plate-like precipitates on the plasticity of Al-Cu micro-pillars, with a sample size allowing the precipitates to cross the entire micro-pillar. {100}-slip traces are identified for the first time in Al and Al alloys at room temperature. We investigate the underlying mechanisms of this unusual {100}-slip, and show that it operates along the coherent $θ^\prime$-Al$_2$Cu precipitate/$α$-Al matrix interface. A combination of molecular dynamics simulations and stress analysis indicates that screw dislocations can cross-slip from the {111} plane onto the {100} $θ^\prime$-Al$_2$Cu/$α$-Al interface, then move on it through a kink-pair mechanism, providing a reasonable explanation to the observed {100}-slips. The roles of the $θ^\prime$-Al$_2$Cu/$α$-Al matrix interface on the properties of interfacial dislocations are studied within the Peierls-Nabarro framework, showing that the interface can stabilize the {100} screw dislocations from the spreading of the core, and increases the Peierls stress. These results improve our understanding of the mechanical behavior of Al-Cu micro-pillars at room temperature, and imply an enhanced role of interfacial slip in Al-Cu based alloys at elevated temperature in consideration of the underlying kink-pair mechanism.
△ Less
Submitted 26 July, 2019;
originally announced July 2019.
-
Plate-like precipitate effects on plasticity of Al-Cu alloys at micrometer to submicrometer scales
Authors:
Peng Zhang,
Jian-Jun Bian,
Chong Yang,
Jin-Yu Zhang,
Gang Liu,
Jérôme Weiss,
Jun Sun
Abstract:
The continuous miniaturization of modern electromechanical systems calls for a comprehensive understanding of the mechanical properties of metallic materials specific to micrometer and sub-micrometer scales. At these scales, the nature of dislocation-mediated plasticity changes radically: sub-micrometer metallic samples exhibit high yield strengths, however accompanied by detrimental intermittent…
▽ More
The continuous miniaturization of modern electromechanical systems calls for a comprehensive understanding of the mechanical properties of metallic materials specific to micrometer and sub-micrometer scales. At these scales, the nature of dislocation-mediated plasticity changes radically: sub-micrometer metallic samples exhibit high yield strengths, however accompanied by detrimental intermittent strain fluctuations compromising forming processes and endangering structural stability. In this paper, we studied the effects of plate-like $θ^\prime$-Al$_2$Cu precipitates on the strength, plastic fluctuations and deformation mechanisms of Al-Cu alloys from micro-pillar compression testing. The plate-like precipitates have diameters commensurate with the external size of the Al-Cu micro-pillars. Our results show that these plate-like precipitates can strengthen the materials and suppress plastic fluctuations efficiently at large sample sizes ($\geq 3 μm$). However, the breakdown of the mean-field pinning landscape at smaller scales weakens its taming effect on intermittency. Over an intermediate range of sample sizes allowing the precipitates to cross the entire pillar, an enhanced apparent strain hardening and a sharp decrease of jerkiness are observed, in association with the presence of {100}-slip traces along the coherent $θ^\prime$-Al$_2$Cu precipitate/$α$-Al matrix interface and precipitate shearing. These complex effects of plate-like precipitates on plasticity are analyzed, experimentally and theoretically, in view of the interferences between external and internal sizes, and the related modifications of the underlying plastic mechanisms.
△ Less
Submitted 25 July, 2019; v1 submitted 23 July, 2019;
originally announced July 2019.
-
Anisotropic Deformation in the Compressions of Single Crystalline Copper Nanoparticles
Authors:
Jianjun Bian,
Hao Zhang,
Xinrui Niu,
Gangfeng Wang
Abstract:
Atomistic simulations are performed to probe the anisotropic deformation in the compressions of face-centred-cubic metallic nanoparticles. In the elastic regime, the compressive load-depth behaviors can be characterized by the classical Hertzian model or flat punch model, depending on the surface configuration beneath indenter. On the onset of plasticity, atomic-scale surface steps serve as the so…
▽ More
Atomistic simulations are performed to probe the anisotropic deformation in the compressions of face-centred-cubic metallic nanoparticles. In the elastic regime, the compressive load-depth behaviors can be characterized by the classical Hertzian model or flat punch model, depending on the surface configuration beneath indenter. On the onset of plasticity, atomic-scale surface steps serve as the source of heterogeneous dislocation in nanoparticle, which is distinct from indenting bulk materials. Under [111] compression, the gliding of jogged dislocation takes over the dominant plastic deformation. The plasticity is governed by nucleation and exhaustion of extended dislocation ribbons in [110] compression. Twin boundary migration mainly sustain the plastic deformation under [112] compression. This study is helpful to extract the mechanical properties of metallic nanoparticles and understand their anisotropic deformation behaviors.
△ Less
Submitted 24 December, 2017;
originally announced December 2017.
-
Orientation-dependent deformation mechanisms of bcc niobium nanoparticles
Authors:
J. J. Bian,
L. Yang,
X. R. Niu,
G. F. Wang
Abstract:
Nanoparticles usually exhibit pronounced anisotropic properties, and a close insight into the atomic-scale deformation mechanisms is of great interest. In present study, atomic simulations are conducted to analyze the compression of bcc nanoparticles, and orientation-dependent features are addressed. It is revealed that surface morphology under indenter predominantly governs the initial elastic re…
▽ More
Nanoparticles usually exhibit pronounced anisotropic properties, and a close insight into the atomic-scale deformation mechanisms is of great interest. In present study, atomic simulations are conducted to analyze the compression of bcc nanoparticles, and orientation-dependent features are addressed. It is revealed that surface morphology under indenter predominantly governs the initial elastic response. The loading curve follows the flat punch contact model in [110] compression, while it obeys the Hertzian contact model in [111] and [001] compressions. In plastic deformation regime, full dislocation gliding is dominated in [110] compression, while deformation twinning is prominent in [111] compression, and these two mechanisms coexist in [001] compression. Such deformation mechanisms are distinct from those in bulk crystals under nanoindentation and nanopillars under compression, and the major differences are also illuminated. Our results provide an atomic perspective on the mechanical behaviors of bcc nanoparticles and are helpful for the design of nanoparticle-based components and systems.
△ Less
Submitted 16 September, 2017;
originally announced September 2017.
-
Critical dynamics and universality of the random-bond Potts ferromagnet with tri-distributed quenched disorders
Authors:
H. P. Ying,
B. J. Bian,
D. R. Ji,
H. J. Luo,
L. Schuelke
Abstract:
Critical behavior in short-time dynamics is investigated by a Monte Carlo study for the random-bond Potts ferromagnet with a trinary distribution of quenched disorders on two-dimensional triangular lattices. The dynamic scaling is verified and applied to estimate critical exponents $θ$, $z$ and $β/ν$ for several realizations of the trinary distribution. Our critical scaling analysis strongly ind…
▽ More
Critical behavior in short-time dynamics is investigated by a Monte Carlo study for the random-bond Potts ferromagnet with a trinary distribution of quenched disorders on two-dimensional triangular lattices. The dynamic scaling is verified and applied to estimate critical exponents $θ$, $z$ and $β/ν$ for several realizations of the trinary distribution. Our critical scaling analysis strongly indicates that the bond randomness influences the critical universality.
△ Less
Submitted 17 March, 2001; v1 submitted 16 March, 2001;
originally announced March 2001.
