-
Filling a gap in materials mechanics: Nanoindentation at high constant strain rates upto $10^5 s^{-1}$
Authors:
Lalith Kumar Bhaskar,
Dipali Sonawane,
Hendrik Holz,
Jeongin Paeng,
Peter Schweizer,
Jing Rao,
Bárbara Bellón,
Damian Frey,
Aloshious Lambai,
Laszlo Petho,
Johann Michler,
Jakob Schwiedrzik,
Gaurav Mohanty,
Gerhard Dehm,
Rajaprakash Ramachandramoorthy
Abstract:
A central focus in high strain rate research is understanding the dynamic behavior of materials at strain rates where a strength upturn is observed. While strength upturns at strain rates of $10^3$ to $10^4~\mathrm{s}^{-1}$ have been widely reported in the literature, their occurrence in certain materials remains controversial, and the underlying physics driving this phenomenon is not yet fully un…
▽ More
A central focus in high strain rate research is understanding the dynamic behavior of materials at strain rates where a strength upturn is observed. While strength upturns at strain rates of $10^3$ to $10^4~\mathrm{s}^{-1}$ have been widely reported in the literature, their occurrence in certain materials remains controversial, and the underlying physics driving this phenomenon is not yet fully understood. Current mechanical testing methods are limited, as no single technique spans the full strain rate range of $10^1$ to $10^5~\mathrm{s}^{-1}$ where this phenomenon is expected, and a unified technique would enable consistent post-deformation characterization with minimal error. To address this, we developed a customized piezoelectric in situ nanomechanical test setup, enabling constant indentation strain rates up to $10^5~\mathrm{s}^{-1}$ for the first time. Using this system, we examined rate-dependent hardness in single-crystalline molybdenum, nanocrystalline nickel, and amorphous fused silica over strain rates from $10^1$ to $10^5~\mathrm{s}^{-1}$, remarkably revealing a hardness upturn in all three materials. Further, post-deformation analysis of single-crystalline molybdenum revealed that the hardness upturn was primarily driven by increased dislocation density, with phonon drag -- traditionally considered a dominant contributor -- playing a minimal role.
△ Less
Submitted 13 June, 2025; v1 submitted 10 February, 2025;
originally announced February 2025.
-
Probing Elastic Isotropy in Entropy Stabilized Transition Metal Oxides: Experimental Estimation of Single Crystal Elastic Constants from Polycrystalline Materials
Authors:
Lalith Kumar Bhaskar,
Niraja Moharana,
Hendrik Holz,
Rajaprakash Ramachandramoorthy,
K. C. Hari Kumar,
Ravi Kumar
Abstract:
Single Crystal Elastic Constants (SECs) are pivotal for understanding material deformation, validating interatomic potentials, and enabling crucial material simulations. The entropy stabilized oxide showcases intriguing properties, underscoring the necessity for the determination of precise SECs to establish reliable interatomic potential and unlock its full potential using simulations. This study…
▽ More
Single Crystal Elastic Constants (SECs) are pivotal for understanding material deformation, validating interatomic potentials, and enabling crucial material simulations. The entropy stabilized oxide showcases intriguing properties, underscoring the necessity for the determination of precise SECs to establish reliable interatomic potential and unlock its full potential using simulations. This study presents an innovative methodology for estimating SECs from polycrystalline materials, requiring only two diffraction elastic constants and isotropic elastic constants for crystals with cubic symmetry. Validation using phase-pure nickel demonstrated good agreement with existing literature values, with a maximum 11.5% deviation for $C_{12}$ values. Extending the methodology to [(MgNiCoCuZn)O], SECs were calculated: 219 GPa for $C_{11}$, 116 GPa for $C_{12}$, and 51 GPa for $C_{44}$. Comparison with literature-reported values from DFT calculations revealed a significant divergence, ranging from 25% to 59% in the bulk and shear modulus calculated using the Voigt-Reuss-Hill average. To comprehend this disparity, we conducted DFT calculations and thoroughly examined the factors influencing these values. This study not only introduces a straightforward and dependable SEC estimation methodology but also provides precise experimental SEC values for [(MgNiCoCuZn)O] entropy stabilized oxides at ambient conditions, crucial for developing accurate interatomic potentials in future research.
△ Less
Submitted 20 September, 2024;
originally announced September 2024.
-
High Strain Rate Compressive Deformation Behavior of Nickel Microparticles
Authors:
Bárbara Bellón,
Lalith Kumar Bhaskar,
Tobias Brink,
Raquel Aymerich-Armengol,
Dipali Sonawane,
Dominique Chatain,
Gerhard Dehm,
Rajaprakash Ramachandramoorthy
Abstract:
Understanding the mechanical properties of metals at extreme conditions is essential for the advancement of miniaturized technologies. As dimensions decrease, materials will experience higher strain rates at the same applied velocities. Moreover, the interplay effects of strain rates and temperatures are often overlooked and could have critical effects in applications. In this study, for the first…
▽ More
Understanding the mechanical properties of metals at extreme conditions is essential for the advancement of miniaturized technologies. As dimensions decrease, materials will experience higher strain rates at the same applied velocities. Moreover, the interplay effects of strain rates and temperatures are often overlooked and could have critical effects in applications. In this study, for the first time, the rate-dependent and temperature-dependent mechanical response of nickel microparticles have been investigated. The microparticles were obtained by solid-state dewetting of nickel thin films deposited on c-sapphire. They exhibit self-similar shapes with identical sets of planes, facilitating straightforward comparison between particles. This research represents the first in-depth analysis of the mechanical properties of nickel single crystal dewetted microparticles across six orders of magnitude at room temperature and three orders of magnitude at 128 K. Molecular dynamic simulations (MD) were conducted in parallel on particles with the same faceting. In this work, the gap between experiments and simulations has been reduced to over one order of magnitude in size and 3 orders of magnitude in the strain rates. The thermal activation parameter analysis and MD simulations were employed to ascertain whether homogeneous or heterogeneous dislocation nucleation was the dominant mechanism controlling deformation in the particles.
△ Less
Submitted 23 August, 2024; v1 submitted 14 August, 2024;
originally announced August 2024.
