-
Patterning edge-like defects and tuning defective areas on the basal plane of ultra-large MoS$_{2}$ monolayers toward hydrogen evolution reaction
Authors:
Bianca Rocha Florindo,
Leonardo H. Hasimoto,
Nicolli de Freitas,
Graziâni Candiotto,
Erika Nascimento Lima,
Cláudia de Lourenço,
Ana B. S. de Araujo,
Carlos Ospina,
Jefferson Bettini,
Edson R. Leite,
Renato S. Lima,
Adalberto Fazzio,
Rodrigo B. Capaz,
Murilo Santhiago
Abstract:
The catalytic sites of MoS$_{2}$ monolayers towards hydrogen evolution are well known to be vacancies and edge-like defects. However, it is still very challenging to control the position, size, and defective areas on the basal plane of Mo$S_{2}$ monolayers by most of defect-engineering routes. In this work, the fabrication of etched arrays on ultra-large supported and free-standing MoS$_{2}$ monol…
▽ More
The catalytic sites of MoS$_{2}$ monolayers towards hydrogen evolution are well known to be vacancies and edge-like defects. However, it is still very challenging to control the position, size, and defective areas on the basal plane of Mo$S_{2}$ monolayers by most of defect-engineering routes. In this work, the fabrication of etched arrays on ultra-large supported and free-standing MoS$_{2}$ monolayers using focused ion beam (FIB) is reported for the first time. By tuning the Ga+ ion dose, it is possible to confine defects near the etched edges or spread them over ultra-large areas on the basal plane. The electrocatalytic activity of the arrays toward hydrogen evolution reaction (HER) was measured by fabricating microelectrodes using a new method that preserves the catalytic sites. We demonstrate that the overpotential can be decreased up to 290 mV by assessing electrochemical activity only at the basal plane. High-resolution transmission electron microscopy images obtained on FIB patterned freestanding MoS$_{2}$ monolayers reveal the presence of amorphous regions and X-ray photoelectron spectroscopy indicates sulfur excess in these regions. Density-functional theory calculations provide identification of catalytic defect sites. Our results demonstrate a new rational control of amorphous-crystalline surface boundaries and future insight for defect optimization in MoS$_{2}$ monolayers.
△ Less
Submitted 7 November, 2023;
originally announced November 2023.
-
Size-dependent bandgap and particle size distribution of colloidal semiconductor nanocrystals
Authors:
Diego Lourençoni Ferreira,
J. C. L. Sousa,
R. N. Maronesi,
J. Bettini,
M. A. Schiavon,
Alvaro V. N. C. Teixeira,
Andreza G. Silva
Abstract:
A new analytical expression for the size-dependent bandgap of colloidal semiconductor nanocrystals is proposed within the framework of the finite-depth square-well effective mass approximation in order to provide a quantitative description of the quantum confinement effect. This allows one to convert optical spectroscopic data (photoluminescence spectrum and absorbance edge) into accurate estimate…
▽ More
A new analytical expression for the size-dependent bandgap of colloidal semiconductor nanocrystals is proposed within the framework of the finite-depth square-well effective mass approximation in order to provide a quantitative description of the quantum confinement effect. This allows one to convert optical spectroscopic data (photoluminescence spectrum and absorbance edge) into accurate estimates for the particle size distributions of colloidal systems even if the traditional effective mass model is expected to fail, which occurs typically for very small particles belonging to the so-called strong confinement limit. By applying the reported theoretical methodologies to CdTe nanocrystals synthesized through wet chemical routes, size distributions are inferred and compared directly to those obtained from atomic force microscopy and transmission electron microscopy. This analysis can be used as a complementary tool for the characterization of nanocrystal samples of many other systems such as the II-VI and III-V semiconductor materials.
△ Less
Submitted 18 October, 2017; v1 submitted 3 October, 2017;
originally announced October 2017.
-
Surface Effects on the Mechanical Elongation of AuCu Nanowires: De-alloying and the Formation of Mixed Suspended Atomic Chains
Authors:
M. J. Lagos,
P. A. S. Autreto,
J. Bettini,
F. Sato,
S. O. Dantas,
D. S. Galvao,
D. Ugarte
Abstract:
We report here an atomistic study of the mechanical deformation of AuxCu(1-x) atomic-size wires (NWs) by means of high resolution transmission electron microscopy (HRTEM) experiments. Molecular dynamics simulations were also carried out in order to obtain deeper insights on the dynamical properties of stretched NWs. The mechanical properties are significantly dependent on the chemical composition…
▽ More
We report here an atomistic study of the mechanical deformation of AuxCu(1-x) atomic-size wires (NWs) by means of high resolution transmission electron microscopy (HRTEM) experiments. Molecular dynamics simulations were also carried out in order to obtain deeper insights on the dynamical properties of stretched NWs. The mechanical properties are significantly dependent on the chemical composition that evolves in time at the junction; some structures exhibit a remarkable de-alloying behavior. Also, our results represent the first experimental realization of mixed linear atomic chains (LACs) among transition and noble metals; in particular, surface energies induce chemical gradients on NW surfaces that can be exploited to control the relative LAC compositions (different number of gold and copper atoms). The implications of these results for nanocatalysis and spin transport of one-atom-thick metal wires are addressed.
△ Less
Submitted 23 February, 2015;
originally announced February 2015.
-
Thermal effect on magnetic parameters of high-coercivity cobalt ferrite
Authors:
E. F. Chagas,
A. S. Ponce,
R. J. Prado,
G. M. Silva,
J. Bettini,
E. Baggio-Saitovitch
Abstract:
We prepared very high-coercivity cobalt ferrite nanoparticles using short-time high-energy mechanical milling. After the milling process, the coercivity of the nanoparticles reached 3.75 kOe - a value almost five times higher than that obtained for the non-milled sample. We performed a thermal treatment on the milled sample at 300, 400, and 600 oC for 30 and 180 mins, and studied the changes in th…
▽ More
We prepared very high-coercivity cobalt ferrite nanoparticles using short-time high-energy mechanical milling. After the milling process, the coercivity of the nanoparticles reached 3.75 kOe - a value almost five times higher than that obtained for the non-milled sample. We performed a thermal treatment on the milled sample at 300, 400, and 600 oC for 30 and 180 mins, and studied the changes in the magnetic parameters due to the thermal treatment using the hysteresis curves, Williamson-Hall analysis, and transmission electron microscopy. The thermal treatment at 600 oC causes a decrease in the microstructural strain and density of structural defects resulting in a significant decrease in coercivity. Furthermore, this thermal treatment increases the size of the nanoparticles and, as a consequence, there is a substantial increase in the saturation magnetization. The coercivity and the saturation magnetization are less affected by the thermal treatment at 300 and 400 oC.
△ Less
Submitted 10 April, 2014;
originally announced April 2014.
-
Nanosized precipitates in H13 tool steel low temperature plasma nitriding
Authors:
L. F. Zagonel,
J. Bettini,
R. L. O. Basso,
P. Paredez,
H. Pinto,
C. M. Lepienski,
F. Alvarez
Abstract:
A comprehensive study of pulsed nitriding in AISI H13 tool steel at low temperature (400°C) is reported for several durations. X-ray diffraction results reveal that a nitrogen enriched compound (Epsilon-Fe2-3N, iron nitride) builds up on the surface within the first process hour despite the low process temperature. Beneath the surface, X-ray Wavelength Dispersive Spectroscopy (WDS) in a Scanning E…
▽ More
A comprehensive study of pulsed nitriding in AISI H13 tool steel at low temperature (400°C) is reported for several durations. X-ray diffraction results reveal that a nitrogen enriched compound (Epsilon-Fe2-3N, iron nitride) builds up on the surface within the first process hour despite the low process temperature. Beneath the surface, X-ray Wavelength Dispersive Spectroscopy (WDS) in a Scanning Electron Microscope (SEM) indicates relatively higher nitrogen concentrations (up to 12 at.%) within the diffusion layer while microscopic nitrides are not formed and existing carbides are not dissolved. Moreover, in the diffusion layer, nitrogen is found to be dispersed in the matrix and forming nanosized precipitates. The small coherent precipitates are observed by High-Resolution Transmission Electron Microscopy (HR-TEM) while the presence of nitrogen is confirmed by electron energy loss spectroscopy (EELS). Hardness tests show that the material hardness increases linearly with the nitrogen concentration, reaching up to 14.5 GPa in the surface while the Young Modulus remains essentially unaffected. Indeed, the original steel microstructure is well preserved even in the nitrogen diffusion layer. Nitrogen profiles show a case depth of about ~43 microns after nine hours of nitriding process. These results indicate that pulsed plasma nitriding is highly efficient even at such low temperatures and that at this process temperature it is possible to form thick and hard nitrided layers with satisfactory mechanical properties. This process can be particularly interesting to enhance the surface hardness of tool steels without exposing the workpiece to high temperatures and altering its bulk microstructure.
△ Less
Submitted 28 August, 2012;
originally announced August 2012.
-
Observation of the Smallest Metal Nanotube with Square-cross-section
Authors:
Maureen Lagos,
Fernando Sato,
Jeferson Bettini,
Varlei Rodrigues,
Douglas S. Galvao,
Daniel Ugarte
Abstract:
Understanding the mechanical properties of nanoscale systems requires a range of measurement techniques and theoretical approaches to gather the relevant physical and chemical information. The arrangements of atoms in nanostructures and macroscopic matter can be different, principally due to the role of surface energy, but the interplay between atomic and electronic structure in association with…
▽ More
Understanding the mechanical properties of nanoscale systems requires a range of measurement techniques and theoretical approaches to gather the relevant physical and chemical information. The arrangements of atoms in nanostructures and macroscopic matter can be different, principally due to the role of surface energy, but the interplay between atomic and electronic structure in association with applied mechanical stress can also lead to surprising differences. For example, metastable structures such as suspended chains of atoms and helical wires have been produced by the stretching of metal junctions. Here we report the spontaneous formation of the smallest possible metal nanotube with a square cross-section during the elongation of silver nanocontacts. Ab initio calculations and molecular simulations indicate that the hollow wire forms because this configuration allows the surface energy to be minimized, and also generates a soft structure capable of absorbing a huge tensile deformation.
△ Less
Submitted 10 March, 2009;
originally announced March 2009.
-
On the Formation of Copper Linear Atomic Suspended Chains
Authors:
F. Sato,
A. S. Moreira,
J. Bettini,
P. Z. Coura,
S. O. Dantas,
D. Ugarte,
D. S. Galvao
Abstract:
We report high resolution transmission electron microscopy and classical molecular dynamics simulation results of mechanically stretching copper nanowires conducting to linear atomic suspended chains (LACs) formation. In contrast with some previous experimental and theoretical work in literature that stated that the formation of LACs for copper should not exist our results showed the existence o…
▽ More
We report high resolution transmission electron microscopy and classical molecular dynamics simulation results of mechanically stretching copper nanowires conducting to linear atomic suspended chains (LACs) formation. In contrast with some previous experimental and theoretical work in literature that stated that the formation of LACs for copper should not exist our results showed the existence of LAC for the [111], [110], and [100] crystallographic directions, being thus the sequence of most probable occurence.
△ Less
Submitted 3 February, 2006;
originally announced February 2006.
-
Nanowires and Suspended Atom Chains from Metal alloys
Authors:
J. Bettini,
F. Sato,
P. Z. Coura,
S. O. Dantas,
D. S. Galvao,
D. Ugarte
Abstract:
We present a study of the elongation and rupture of gold-silver alloy nanowires. Atomistic details of the evolution were derived from time-resolved atomic resolution transmission electron microscopy and molecular dynamics simulations. The results show the occurrence of gold enrichment at the nanojunction region, leading to a gold-like structural behavior even for alloys with minor gold content.…
▽ More
We present a study of the elongation and rupture of gold-silver alloy nanowires. Atomistic details of the evolution were derived from time-resolved atomic resolution transmission electron microscopy and molecular dynamics simulations. The results show the occurrence of gold enrichment at the nanojunction region, leading to a gold-like structural behavior even for alloys with minor gold content. Our observations have also revealed the formation of mixed (Au and Ag) linear atomic chains.
△ Less
Submitted 26 January, 2006;
originally announced January 2006.
-
Evidence of spontaneous spin polarized transport in magnetic nanowires
Authors:
Varlei Rodrigues,
Jefferson Bettini,
Paulo C. Silva,
Daniel Ugarte
Abstract:
The exploitation of the spin in charge-based systems is opening revolutionary opportunities for device architecture. Surprisingly, room temperature electrical transport through magnetic nanowires is still an unresolved issue. Here, we show that ferromagnetic (Co) suspended atom chains spontaneously display an electron transport of half a conductance quantum, as expected for a fully polarized con…
▽ More
The exploitation of the spin in charge-based systems is opening revolutionary opportunities for device architecture. Surprisingly, room temperature electrical transport through magnetic nanowires is still an unresolved issue. Here, we show that ferromagnetic (Co) suspended atom chains spontaneously display an electron transport of half a conductance quantum, as expected for a fully polarized conduction channel. Similar behavior has been observed for Pd (a quasi-magnetic 4d metal) and Pt (a non-magnetic 5d metal). These results suggest that the nanowire low dimensionality reinforces or induces magnetic behavior, lifting off spin degeneracy even at room temperature and zero external magnetic field.
△ Less
Submitted 11 July, 2003;
originally announced July 2003.
-
Quantum Conductance in Silver Nanowires: correlation between atomic structure and transport properties
Authors:
V. Rodrigues,
J. Bettini,
A. R. Rocha,
L. G. C. Rego,
D. Ugarte
Abstract:
We have analyzed the atomic arrangements and quantum conductance of silver nanowires generated by mechanical elongation. The surface properties of Ag induce unexpected structural properties, as for example, predominance of high aspect ratio rod-like wires. The structural behavior was used to understand the Ag quantum conductance data and the proposed correlation was confirmed by means of theoret…
▽ More
We have analyzed the atomic arrangements and quantum conductance of silver nanowires generated by mechanical elongation. The surface properties of Ag induce unexpected structural properties, as for example, predominance of high aspect ratio rod-like wires. The structural behavior was used to understand the Ag quantum conductance data and the proposed correlation was confirmed by means of theoretical calculations. These results emphasize that the conductance of metal point contacts is determined by the preferred atomic structures and, that atomistic descriptions are essential to interpret the quantum transport behavior of metal nanostructures.
△ Less
Submitted 10 January, 2002;
originally announced January 2002.
