-
Determination of spin Hall effect and spin diffusion length of Pt from self-consistent fitting of damping enhancement and inverse spin-orbit torque measurements
Authors:
Andrew J. Berger,
Eric R. J. Edwards,
Hans T. Nembach,
Olof Karis,
Mathias Weiler,
T. J. Silva
Abstract:
Understanding the evolution of spin-orbit torque (SOT) with increasing heavy-metal thickness in ferromagnet/normal metal (FM/NM) bilayers is critical for the development of magnetic memory based on SOT. However, several experiments have revealed an apparent discrepancy between damping enhancement and damping-like SOT regarding their dependence on NM thickness. Here, using linewidth and phase-resol…
▽ More
Understanding the evolution of spin-orbit torque (SOT) with increasing heavy-metal thickness in ferromagnet/normal metal (FM/NM) bilayers is critical for the development of magnetic memory based on SOT. However, several experiments have revealed an apparent discrepancy between damping enhancement and damping-like SOT regarding their dependence on NM thickness. Here, using linewidth and phase-resolved amplitude analysis of vector network analyzer ferromagnetic resonance (VNA-FMR) measurements, we simultaneously extract damping enhancement and both field-like and damping-like inverse SOT in Ni$_{80}$Fe$_{20}$/Pt bilayers as a function of Pt thickness. By enforcing an interpretation of the data which satisfies Onsager reciprocity, we find that both the damping enhancement and damping-like inverse SOT can be described by a single spin diffusion length ($\approx$ 4 nm), and that we can separate the spin pumping and spin memory loss (SML) contributions to the total damping. This analysis indicates that less than 40% of the angular momentum pumped by FMR through the Ni$_{80}$Fe$_{20}$/Pt interface is transported as spin current into the Pt. On account of the SML and corresponding reduction in total spin current available for spin-charge transduction in the Pt, we determine the Pt spin Hall conductivity ($σ_\mathrm{SH} = (2.36 \pm 0.04)\times10^6 Ω^{-1} \mathrm{m}^{-1}$) and bulk spin Hall angle ($θ_\mathrm{SH}=0.387 \pm0.008$) to be larger than commonly-cited values. These results suggest that Pt can be an extremely useful source of SOT if the FM/NM interface can be engineered to minimize SML. Lastly, we find that self-consistent fitting of the damping and SOT data is best achieved by a model with Elliott-Yafet spin relaxation and extrinsic inverse spin Hall effect, such that both the spin diffusion length and spin Hall conductivity are proportional to the Pt charge conductivity.
△ Less
Submitted 21 March, 2018; v1 submitted 21 November, 2017;
originally announced November 2017.
-
Inductive detection of field-like and damping-like AC inverse spin-orbit torques in ferromagnet/normal metal bilayers
Authors:
Andrew J. Berger,
Eric R. J. Edwards,
Hans T. Nembach,
Alexy D. Karenowska,
Mathias Weiler,
Thomas J. Silva
Abstract:
Functional spintronic devices rely on spin-charge interconversion effects, such as the reciprocal processes of electric field-driven spin torque and magnetization dynamics-driven spin and charge flow. Both damping-like and field-like spin-orbit torques have been observed in the forward process of current-driven spin torque and damping-like inverse spin-orbit torque has been well-studied via spin p…
▽ More
Functional spintronic devices rely on spin-charge interconversion effects, such as the reciprocal processes of electric field-driven spin torque and magnetization dynamics-driven spin and charge flow. Both damping-like and field-like spin-orbit torques have been observed in the forward process of current-driven spin torque and damping-like inverse spin-orbit torque has been well-studied via spin pumping into heavy metal layers. Here we demonstrate that established microwave transmission spectroscopy of ferromagnet/normal metal bilayers under ferromagnetic resonance can be used to inductively detect the AC charge currents driven by the inverse spin-charge conversion processes. This technique relies on vector network analyzer ferromagnetic resonance (VNA-FMR) measurements. We show that in addition to the commonly-extracted spectroscopic information, VNA-FMR measurements can be used to quantify the magnitude and phase of all AC charge currents in the sample, including those due to spin pumping and spin-charge conversion. Our findings reveal that Ni$_{80}$Fe$_{20}$/Pt bilayers exhibit both damping-like and field-like inverse spin-orbit torques. While the magnitudes of both the damping-like and field-like inverse spin-orbit torque are of comparable scale to prior reported values for similar material systems, we observed a significant dependence of the damping-like magnitude on the order of deposition. This suggests interface quality plays an important role in the overall strength of the damping-like spin-to-charge conversion.
△ Less
Submitted 26 October, 2017; v1 submitted 17 November, 2016;
originally announced November 2016.
-
Correlating spin transport and electrode magnetization in a graphene spin valve: simultaneous magnetic microscopy and non-local measurements
Authors:
Andrew J. Berger,
Michael R. Page,
Hua Wen,
Kathleen M. McCreary,
Vidya P. Bhallamudi,
Roland K. Kawakami,
P. Chris Hammel
Abstract:
Using simultaneous magnetic force microscopy (MFM) and transport measurements of a graphene spin valve, we correlate the non-local spin signal with the magnetization of the device electrodes. The imaged magnetization states corroborate the influence of each electrode within a one-dimensional spin transport model and provide evidence linking domain wall pinning to additional features in the transpo…
▽ More
Using simultaneous magnetic force microscopy (MFM) and transport measurements of a graphene spin valve, we correlate the non-local spin signal with the magnetization of the device electrodes. The imaged magnetization states corroborate the influence of each electrode within a one-dimensional spin transport model and provide evidence linking domain wall pinning to additional features in the transport signal.
△ Less
Submitted 17 July, 2015;
originally announced July 2015.
-
A versatile LabVIEW and FPGA-based scanned probe microscope for in-operando electronic device characterization
Authors:
Andrew J. Berger,
Michael R. Page,
Jan Jacob,
Justin R. Young,
Jim Lewis,
Lothar Wenzel,
Vidya P. Bhallamudi,
Ezekiel Johnston-Halperin,
Denis V. Pelekhov,
P. Chris Hammel
Abstract:
Understanding the complex properties of electronic and spintronic devices at the micro- and nano-scale is a topic of intense current interest as it becomes increasingly important for scientific progress and technological applications. In-operando characterization of such devices by scanned probe techniques is particularly well-suited for the microscopic study of these properties. We have developed…
▽ More
Understanding the complex properties of electronic and spintronic devices at the micro- and nano-scale is a topic of intense current interest as it becomes increasingly important for scientific progress and technological applications. In-operando characterization of such devices by scanned probe techniques is particularly well-suited for the microscopic study of these properties. We have developed a scanned probe microscope (SPM) which is capable of both standard force imaging (atomic, magnetic, electrostatic) and simultaneous electrical transport measurements. We utilize flexible and inexpensive FPGA (field programmable gate array) hardware and a custom software framework developed in National Instrument's LabVIEW environment to perform the various aspects of microscope operation and device measurement. The FPGA-based approach enables sensitive, real-time cantilever frequency-shift detection. Using this system, we demonstrate electrostatic force microscopy of an electrically-biased graphene FET device. The combination of SPM and electrical transport also enables imaging of the transport response to a localized perturbation provided by the scanned cantilever tip. Facilitated by the broad presence of LabVIEW in the experimental sciences and the openness of our software solution, our system permits a wide variety of combined scanning and transport measurements by providing standardized interfaces and flexible access to all aspects of a measurement (input and output signals, and processed data). Our system also enables precise control of timing (synchronization of scanning and transport operations) and implementation of sophisticated feedback protocols, and thus should be broadly interesting and useful to practitioners in the field.
△ Less
Submitted 1 October, 2014;
originally announced October 2014.
-
Off-Resonant Manipulation of Spins in Diamond via Precessing Magnetization of a Proximal Ferromagnet
Authors:
Chris S. Wolfe,
Vidya P. Bhallamudi,
Hilong L. Wang,
Chunhui H. Du,
Sergei Manuilov,
Andrew J. Berger,
Rohan Adur,
Fengyuan Y. Yang,
P. Chris Hammel
Abstract:
We report the manipulation of nitrogen vacancy (NV) spins in diamond when nearby ferrimagnetic insulator, yttrium iron garnet, is driven into precession. The change in NV spin polarization, as measured by changes in photoluminescence, is comparable in magnitude to that from conventional optically detected magnetic resonance, but relies on a distinct mechanism as it occurs at a microwave frequency…
▽ More
We report the manipulation of nitrogen vacancy (NV) spins in diamond when nearby ferrimagnetic insulator, yttrium iron garnet, is driven into precession. The change in NV spin polarization, as measured by changes in photoluminescence, is comparable in magnitude to that from conventional optically detected magnetic resonance, but relies on a distinct mechanism as it occurs at a microwave frequency far removed from the magnetic resonance frequency of the NV spin. This observation presents a new approach to transferring ferromagnetic spin information into a paramagnet and then transducing the response into a robust optical signal. It also opens new avenues for studying ferromagnetism and spin transport at the nanoscale.
△ Less
Submitted 3 March, 2014;
originally announced March 2014.
-
Magnetization dynamics of cobalt grown on graphene
Authors:
A. J. Berger,
W. Amamou,
S. P. White,
R. Adur,
Y. Pu,
R. K. Kawakami,
P. C. Hammel
Abstract:
Ferromagnetic resonance (FMR) spin pumping is a rapidly growing field which has demonstrated promising results in a variety of material systems. This technique utilizes the resonant precession of magnetization in a ferromagnet to inject spin into an adjacent non-magnetic material. Spin pumping into graphene is attractive on account of its exceptional spin transport properties. This article reports…
▽ More
Ferromagnetic resonance (FMR) spin pumping is a rapidly growing field which has demonstrated promising results in a variety of material systems. This technique utilizes the resonant precession of magnetization in a ferromagnet to inject spin into an adjacent non-magnetic material. Spin pumping into graphene is attractive on account of its exceptional spin transport properties. This article reports on FMR characterization of cobalt grown on CVD graphene and examines the validity of linewidth broadening as an indicator of spin pumping. In comparison to cobalt samples without graphene, direct contact cobalt-on-graphene exhibits increased FMR linewidth--an often used signature of spin pumping. Similar results are obtained in Co/MgO/graphene structures, where a 1nm MgO layer acts as a tunnel barrier. However, SQUID, MFM, and Kerr microscopy measurements demonstrate increased magnetic disorder in cobalt grown on graphene, perhaps due to changes in the growth process and an increase in defects. This magnetic disorder may account for the observed linewidth enhancement due to effects such as two-magnon scattering or mosaicity. As such, it is not possible to conclude successful spin injection into graphene from FMR linewidth measurements alone.
△ Less
Submitted 6 November, 2013;
originally announced November 2013.
-
Observation of Pure Spin Transport in a Diamond Spin Wire
Authors:
J. Cardellino,
N. Scozzaro,
M. R. Herman,
A. J. Berger,
C. Zhang,
K. C. Fong,
C. Jayaprakash,
D. V. Pelekhov,
P. C. Hammel
Abstract:
Spin transport electronics - spintronics - focuses on utilizing electron spin as a state variable for quantum and classical information processing and storage. Some insulating materials, such as diamond, offer defect centers whose associated spins are well-isolated from their environment giving them long coherence times; however, spin interactions are important for transport, entanglement, and rea…
▽ More
Spin transport electronics - spintronics - focuses on utilizing electron spin as a state variable for quantum and classical information processing and storage. Some insulating materials, such as diamond, offer defect centers whose associated spins are well-isolated from their environment giving them long coherence times; however, spin interactions are important for transport, entanglement, and read-out. Here, we report direct measurement of pure spin transport - free of any charge motion - within a nanoscale quasi 1D 'spin wire', and find a spin diffusion length ~ 700 nm. We exploit the statistical fluctuations of a small number of spins ($\sqrt{N}$ < 100 net spins) which are in thermal equilibrium and have no imposed polarization gradient. The spin transport proceeds by means of magnetic dipole interactions that induce flip-flop transitions, a mechanism that can enable highly efficient, even reversible, pure spin currents. To further study the dynamics within the spin wire, we implement a magnetic resonance protocol that improves spatial resolution and provides nanoscale spectroscopic information which confirms the observed spin transport. This spectroscopic tool opens a potential route for spatially encoding spin information in long-lived nuclear spin states. Our measurements probe intrinsic spin dynamics at the nanometre scale, providing detailed insight needed for practical devices which seek to control spin.
△ Less
Submitted 8 January, 2014; v1 submitted 12 September, 2013;
originally announced September 2013.
-
Long-range FMR driven spin pumping through a nonmagnetic insulator
Authors:
Y. Pu,
H. L. Wang,
C. H. Du,
R. Adur,
A. J. Berger,
A. Hauser,
R. E. A. Williams,
D. W. McComb,
E. Johnston-Halperin,
P. C. Hammel,
F. Y. Yang
Abstract:
Ferromagnetic resonance (FMR) driven spin pumping is an emerging technique for injection of a pure spin current from a ferromagnet (FM) into a non-magnetic (NM) material without an accompanying charge current. It is widely believed that this pumping proceeds exclusively via a short-range exchange interaction at the FM/NM interface. Here we report robust, long-range spin pumping from the ferrimagne…
▽ More
Ferromagnetic resonance (FMR) driven spin pumping is an emerging technique for injection of a pure spin current from a ferromagnet (FM) into a non-magnetic (NM) material without an accompanying charge current. It is widely believed that this pumping proceeds exclusively via a short-range exchange interaction at the FM/NM interface. Here we report robust, long-range spin pumping from the ferrimagnetic double perovskite Sr2FeMoO6 (SFMO) into Pt across an insulating barrier up to 200 nm thick, and systematically rule out all known spurious effects. This result demonstrates dynamic spin injection over a distance far beyond the coupling range of the exchange interaction, exposing the need to consider other coupling mechanisms. The characteristic length scale for magnetic textures in Sr2FeMoO6 is approximately 150 nm, resulting from structural antiphase boundaries, thus raising the possibility that magnetic dipole coupling underlies the observed long range spin transfer. This discovery reveals a route to dynamic angular momentum transfer between a FM and a NM in the absence of mediation by itinerant electrons and promises new spin-functional devices employing long-range spin pumping.
△ Less
Submitted 2 April, 2014; v1 submitted 14 May, 2013;
originally announced May 2013.
-
Experimental Demonstration Of Scanned Spin-Precession Microscopy
Authors:
V. P. Bhallamudi,
C. S. Wolfe,
V. P. Amin,
D. E. Labanowski,
A. J. Berger,
D. Stroud,
J. Sinova,
P. C. Hammel
Abstract:
Progress in spintronics has been aided by characterization tools tailored to certain archetypical materials. New device structures and materials will require characterization tools that are material independent, provide sufficient resolution to image locally-varying spin properties and enable subsurface imaging. Here we report the demonstration of a novel spin-microscopy tool based on the variatio…
▽ More
Progress in spintronics has been aided by characterization tools tailored to certain archetypical materials. New device structures and materials will require characterization tools that are material independent, provide sufficient resolution to image locally-varying spin properties and enable subsurface imaging. Here we report the demonstration of a novel spin-microscopy tool based on the variation of a global spin-precession signal in response to the localized magnetic field of a scanned probe. We map the local spin density in optically pumped GaAs from this spatially-averaged signal with a resolution of 5.5 microns. This methodology is also applicable to other spin properties and its resolution can be improved. It can extend spin microscopy to device structures not accessible by other techniques, such as buried interfaces and non-optically active materials, due to the universal nature of magnetic interactions between the spins and the probe.
△ Less
Submitted 29 November, 2012;
originally announced November 2012.
-
Imaging spin properties using spatially varying magnetic fields
Authors:
V. P. Bhallamudi,
A. J. Berger,
D. E. Labanowski,
D. Stroud,
P. C. Hammel
Abstract:
We present a novel method to image spin properties of spintronic systems using the spatially confined field of a scanned micromagnetic probe, in conjunction with existing electrical or optical global spin detection schemes. It is thus applicable to all materials systems susceptible to either of those approaches. The proposed technique relies on numerical solutions to the spin diffusion equation in…
▽ More
We present a novel method to image spin properties of spintronic systems using the spatially confined field of a scanned micromagnetic probe, in conjunction with existing electrical or optical global spin detection schemes. It is thus applicable to all materials systems susceptible to either of those approaches. The proposed technique relies on numerical solutions to the spin diffusion equation in the presence of spatially varying fields to obtain the local spin response to the micromagnetic probe field. These solutions also provide insight into the effects of inhomogeneities on Hanle measurements.
△ Less
Submitted 15 January, 2011; v1 submitted 18 October, 2010;
originally announced October 2010.
