-
Oxyfluoride glasses obtained through incorporation of CaF$_2$ into photovoltaic cover glass melts
Authors:
Rafaela Valcarenghi,
Brenno Greatti Silva,
Robson Ferrari Muniz,
Vitor Santaella Zanuto,
Anna Paulla Simon,
Ricardo Schneider,
Raquel Dosciatti Bini,
Márcio Antônio Fiori,
Maxence Vigier,
Emmanuel Veron,
Mathieu Allix,
Marcelo Sandrini,
Marcos Paulo Belançon
Abstract:
The glass industry has limited options to mitigate its environmental footprint, and the demand for cover glass to produce photovoltaic panels is increasing. Currently, the majority of this special type of glass is not being recycled, and in this work, we propose to reuse it as raw material to obtain oxyfluoride glasses. The incorporation of CaF$_2$ and the increasing Na$_2$CO$_3$ content resulted…
▽ More
The glass industry has limited options to mitigate its environmental footprint, and the demand for cover glass to produce photovoltaic panels is increasing. Currently, the majority of this special type of glass is not being recycled, and in this work, we propose to reuse it as raw material to obtain oxyfluoride glasses. The incorporation of CaF$_2$ and the increasing Na$_2$CO$_3$ content resulted in a melting temperature of about 1200$^o$C, significantly lower than in soda-lime glasses, which adds up to the environmental benefits of reusing end-of-life cover glass. The obtained samples show high transparency and thermal stability, allowing the cover glass to make up to 80\% of its weight. XRF analysis was employed to determine the elemental composition of the samples, while XRD and Raman indicated that by adding CaF$_2$, the glass network was depolymerized. In situ XRD as a function of temperature showed the formation of a few crystalline phases in these oxyfluoride samples, evidencing that it can be explored as a matrix to obtain different glass-ceramics. The combination of the glass properties indicates that this method and the resulting material can contribute to reducing the environmental impact of the glass industry, by creating new glass or glass-ceramic materials that can be obtained at a reduced temperature compared to the soda-lime glass, while cover glass being the primary raw material could reduce the need to extract minerals from nature.
△ Less
Submitted 20 May, 2025; v1 submitted 12 May, 2025;
originally announced May 2025.
-
Glassy materials for Silicon-based solar panels: present and future
Authors:
Marcos Paulo Belançon,
Marcelo Sandrini,
Vitor Santaella Zanuto,
Robson Ferrari Muniz
Abstract:
Glass provides mechanical, chemical, and UV protection to solar panels, enabling these devices to withstand weathering for several decades. The increasing demand for solar electricity and the need to reduce anthropogenic carbon emissions require researchers to develop new materials and processes to make solar even more sustainable. Here, we review the current research to create environmentally fri…
▽ More
Glass provides mechanical, chemical, and UV protection to solar panels, enabling these devices to withstand weathering for several decades. The increasing demand for solar electricity and the need to reduce anthropogenic carbon emissions require researchers to develop new materials and processes to make solar even more sustainable. Here, we review the current research to create environmentally friendly glasses and to add new features to the cover glass used in silicon solar panels, such as anti-reflection, self-cleaning, and spectral conversion properties. While several studies have proposed spectral converter designs and reported information regarding their light-conversion efficiency, there is still a need for a standardized protocol to investigate and compare the impact of these modified materials on the electrical output of photovoltaic systems. In light of these issues, we propose a framework for quantifying parameters that can serve as benchmarks for comparing different cover glasses, which is especially important in the search for a viable spectral converter.
△ Less
Submitted 10 August, 2023; v1 submitted 14 March, 2023;
originally announced March 2023.
-
Towards long term sustainability of c-Si solar panels: the environmental benefits of glass sheet recovery
Authors:
Marcos Paulo Belançon,
Marcelo Sandrini,
Francisnara Tonholi,
Leandro Silva Herculano,
Gustavo Sanguino Dias
Abstract:
The cover glass in a silicon solar panel accounts for about 2/3 of the device's weight. Recycling these devices at their end-of-life is fundamental to reducing the industry's environmental impact. Here we investigate the recovery of these glass sheets by a heat-assisted mechanical process. A panel was delaminated, and we have utilized Fourier-transform infrared, Raman, and energy-dispersive spectr…
▽ More
The cover glass in a silicon solar panel accounts for about 2/3 of the device's weight. Recycling these devices at their end-of-life is fundamental to reducing the industry's environmental impact. Here we investigate the recovery of these glass sheets by a heat-assisted mechanical process. A panel was delaminated, and we have utilized Fourier-transform infrared, Raman, and energy-dispersive spectroscopies to confirm the composition of the remaining components and identify aging signals. The results demonstrate that the panel's design was similar to most Silicon solar panels in the market, and we concluded that it would be feasible to recover the glass in most of these devices. Due to its chemical and mechanical strength, this glass would be ready to be reused without the need to melt it again, bringing substantial savings in its energy content and carbon emission related to its production. The glass sheet would be ready to be used as cover glass in another solar panel or architecture material. Our estimates showed that this could be a pathway to reducing the photovoltaic industry's carbon emissions by more than 2 million tonnes per year.
△ Less
Submitted 13 July, 2022; v1 submitted 18 November, 2021;
originally announced November 2021.
-
Float, borosilicate and tellurites as cover glasses in Si photovoltaics: optical properties and performances under sunlight
Authors:
Marcos Paulo Belançon,
Marcelo Sandrini,
Henrique Silva Muniz,
Leandro Silva Herculano,
Gustavo Vinicius Bassi Lukasievicz,
Elton Lima Savi,
Otávio Augusto Capeloto,
Luis Carlos Malacarne,
Nelson Guilherme Castelli Astrath,
Mauro Luciano Baesso,
Gilson Junior Schiavon,
Adriano Aparecido da Silva Junior,
Jorge Diego Marconi
Abstract:
One of the most significant materials in a solar panel is the glass, which provides transparency, UV protection as well as mechanical and chemical resistance. In this work, we describe the production of prototypes of four solar modules made using borosilicate, zinc-tellurite, Pr$^{3+}$ doped zinc-tellurite, and float glass as cover materials. The performance of these prototypes was evaluated under…
▽ More
One of the most significant materials in a solar panel is the glass, which provides transparency, UV protection as well as mechanical and chemical resistance. In this work, we describe the production of prototypes of four solar modules made using borosilicate, zinc-tellurite, Pr$^{3+}$ doped zinc-tellurite, and float glass as cover materials. The performance of these prototypes was evaluated under a solar simulator, and a device was developed to monitor all prototypes under real conditions. A comparison between indoor and outdoor measurements shows that outdoor results are fundamental to evaluate the performance of modified solar modules as the ones considered in this study. In addition, we demonstrate the fundamental role played by the refractive index of cover glasses in the performance of the prototypes, and discuss how this feature could be explored to achieve enhanced devices, as well as other benefits that may arise from this field of research.
△ Less
Submitted 1 October, 2021; v1 submitted 19 September, 2021;
originally announced September 2021.
-
Glass engineering to enhance Si solar cells: a case study of Pr$^{3+}$-Yb$^{3+}$ codoped tellurite-tungstate as spectral converter
Authors:
Maiara Mitiko Taniguchi,
Vitor Santaella Zanuto,
Pablo Portes,
Luis Carlos Malacarne,
Nelson Guilherme Astrath,
Jorge Diego Marconi,
Marcos Paulo Belançon
Abstract:
Spectral converters are known to increase photovoltaic energy conversion by minimizing losses due to fundamental non-absorption and thermalization processes, and have been suggested to surpass the Shockley-Queisser efficiency limit in single junction solar cells. Here we present a detailed spectroscopic study of photoluminescence in tellurite-tungstate glasses doped and codoped with…
▽ More
Spectral converters are known to increase photovoltaic energy conversion by minimizing losses due to fundamental non-absorption and thermalization processes, and have been suggested to surpass the Shockley-Queisser efficiency limit in single junction solar cells. Here we present a detailed spectroscopic study of photoluminescence in tellurite-tungstate glasses doped and codoped with $Pr^{3+}-Yb^{3+}$ and $Ag$ nanoparticles. The energy transfer mechanisms between $Pr^{3+}$ and $Yb^{3+}$ are discussed based on the near infrared emission under excitation at $442$ nm and on the upconversion emission under excitation at $980$ nm. Fluorescence quenching of $^2 F_{5/2}$ level of $Yb^{3+}$ is observed by increasing the concentration of $Pr^{3+}$, as well as by the addition of $Ag$ nanoparticles. In addition, a discussion on the potential of this glass to increase energy production in spectral converters is presented. The results suggest that the few undesirable energy transfer processes occurring in this material are difficult to be controlled or eliminated properly, resulting in intrinsic losses. This discussion is extended to the potential of glass science to enhance energy production in solar cells, showing that newer designs such as bifacial cells may facilitate the exploration of glasses other than soda-lime for mass production of solar cells. The focus on extending the lifespan by reducing UV induced degradation seems to be a more effective approach than the development of spectral converters for Si solar cells.
△ Less
Submitted 14 April, 2020; v1 submitted 27 September, 2019;
originally announced September 2019.
-
The role of Ce$^{3+}$/Ce$^{4+}$ in the spectroscopic properties of cerium oxide doped zinc-tellurite glasses prepared under air
Authors:
Maiara Mitiko Taniguchi,
Edenilson da Silva,
Marco Aurélio Toledo da Silva,
Leandro Herculano,
Robson Ferrari Muniz,
Marcelo Sandrini,
Marcos Paulo Belançon
Abstract:
Emerging technologies are demanding innovative properties of glasses. In this work, Cerium Oxide is used as a dopant in Zinc-Tellurite samples and its effects on the properties of the glass are investigated. Thermal analysis and x-ray diffraction confirmed the amorphous nature of all samples. The bivalent nature of Cerium is investigated spectroscopically and a strong redshift induced by the dopan…
▽ More
Emerging technologies are demanding innovative properties of glasses. In this work, Cerium Oxide is used as a dopant in Zinc-Tellurite samples and its effects on the properties of the glass are investigated. Thermal analysis and x-ray diffraction confirmed the amorphous nature of all samples. The bivalent nature of Cerium is investigated spectroscopically and a strong redshift induced by the dopant is attributed to charge transfers O$^{2-}{\rightarrow}$Ce$^{4+}$, while the 4f-5d transition of Ce$^{3+}$ could not be identified in absorption or luminescence measurements. Yellow/red (570/650 nm) emission under 405/450 nm pumping were observed and are originated from Te$^{4+}$ ions, which absorbs light in the UV/blue region of the spectrum. The incorporation of some Cerium Oxide enhanced the visible luminescence, though we found no evidence that Cerium ions play some role in the radiative process. The luminescence is enhanced though due changes in the glass network induced by the dopant.
△ Less
Submitted 3 July, 2020; v1 submitted 16 April, 2019;
originally announced April 2019.
-
Could spectral converters really enhance photovoltaics?
Authors:
Marcos Paulo Belançon
Abstract:
Spectral converters have been proposed as a tool to achieve high efficiencies from Silicon photovoltaics(PV). Even though from the scientifical point of view it could be interesting to acomplish that, scientists should concentrate effort to invest in materials that can provide more return: in the case of spectral converters, they are very unlikely to have a place in flat-panel PV's. However, conce…
▽ More
Spectral converters have been proposed as a tool to achieve high efficiencies from Silicon photovoltaics(PV). Even though from the scientifical point of view it could be interesting to acomplish that, scientists should concentrate effort to invest in materials that can provide more return: in the case of spectral converters, they are very unlikely to have a place in flat-panel PV's. However, concentrated photovoltaics (CPV) technology may get a boost from such devices, an more attention should be driven to this goal.
△ Less
Submitted 20 August, 2018;
originally announced August 2018.
-
On the prospects of enhance glass based devices with silver nanoparticles: the case of Pr3+ doped tellurite-tungstate glasses
Authors:
Maiara Mitiko Taniguchi,
Jorge Diego Marconi,
Leandro Silva Herculano,
Marcos Paulo Belançon
Abstract:
The development of enhanced optical devices relies on key materials properties. In this context, researchers have investigated the effects of metal nanoparticles incorporation in active rare-earth materials. Here, we discuss the effects of Silver nitrate addition 0.5%, 1.0% and 2.0% mol%) into a Pr3+ doped tellurite-tungstate glasses (TWNN) formed by the conventional melt-quenching technique. The…
▽ More
The development of enhanced optical devices relies on key materials properties. In this context, researchers have investigated the effects of metal nanoparticles incorporation in active rare-earth materials. Here, we discuss the effects of Silver nitrate addition 0.5%, 1.0% and 2.0% mol%) into a Pr3+ doped tellurite-tungstate glasses (TWNN) formed by the conventional melt-quenching technique. The XRD curves confirmed the amorphous structural nature of TWNN glasses. The FTIR spectra identified the presence of different vibrational groups. DSC curves verified the increase around 70 oC for thermal stability with silver addition. Absorption spectra observed surface plasmon resonance (SPR) band around 500 nm. Luminescence measures shows enhanced and quenching for Pr3+ transitions under the 473 nm excitation. The band around 480-520 nm are more affected by SPR band by quenching, and the bands around 575-675 nm are luminescence emission increased due to the presence of silver nanoparticles. In addition, lifetime decays as a function of heat treatment time, has also been verified. The Ag enhances the lifetime regarding the samples annealed by 20 hours and as the Ag concentration increases, the lifetime stretches as well. The present results shows that Pr3+-Ag codoped TWNN glass lead to some remarkable improvement, verified in properties such as lifetime constants or emissions intensities and is a promising candidate for photonic devices.
△ Less
Submitted 17 January, 2018;
originally announced January 2018.
-
Low frequency Raman study of the Boson peak in a Tellurite-tungstate glass over temperature
Authors:
Marcos Paulo Belançon,
Guilhem Simon
Abstract:
In this work we present our findings performing low frequency Raman measurements over temperature in a tellurite-tungstate glass sample. The spectra could be fitted by using only two log-Gaussians, which suggests that quasi-elastic light scattering is negligible. The positions of the peaks have the same temperature behavior, being the higher frequency one refered as Boson Peak in literature. The s…
▽ More
In this work we present our findings performing low frequency Raman measurements over temperature in a tellurite-tungstate glass sample. The spectra could be fitted by using only two log-Gaussians, which suggests that quasi-elastic light scattering is negligible. The positions of the peaks have the same temperature behavior, being the higher frequency one refered as Boson Peak in literature. The similar temperature behavior and depolarization ratio indicates that the peaks may have the same origin, being linked to the tranversal and longitudinal vibrations of some unit.
△ Less
Submitted 31 March, 2017;
originally announced March 2017.
