-
Consequences of the failure of equipartition for the p-V behavior of liquid water and the hydration free energy components of a small protein
Authors:
Dilipkumar N. Asthagiri,
Arjun Valiya Parambathu,
Thomas L. Beck
Abstract:
Earlier we showed that in the molecular dynamics simulation of a rigid model of water it is necessary to use an integration time-step $δt \leq 0.5$ fs to ensure equipartition between translational and rotational modes. Here we extend that study in the $NVT$ ensemble to $NpT$ conditions and to an aqueous protein. We study neat liquid water with the rigid, SPC/E model and the protein BBA (PDB ID: 1F…
▽ More
Earlier we showed that in the molecular dynamics simulation of a rigid model of water it is necessary to use an integration time-step $δt \leq 0.5$ fs to ensure equipartition between translational and rotational modes. Here we extend that study in the $NVT$ ensemble to $NpT$ conditions and to an aqueous protein. We study neat liquid water with the rigid, SPC/E model and the protein BBA (PDB ID: 1FME) solvated in the rigid, TIP3P model. We examine integration time-steps ranging from $0.5$ fs to $4.0$ fs for various thermostat plus barostat combinations. We find that a small $δt$ is necessary to ensure consistent prediction of the simulation volume. Hydrogen mass repartitioning alleviates the problem somewhat, but is ineffective for the typical time-step used with this approach. The compressibility, a measure of volume fluctuations, and the dielectric constant, a measure of dipole moment fluctuations, are also seen to be sensitive to $δt$. Using the mean volume estimated from the $NpT$ simulation, we examine the electrostatic and van der Waals contribution to the hydration free energy of the protein in the $NVT$ ensemble. These contributions are also sensitive to $δt$. In going from $δt = 2$ fs to $δt = 0.5$ fs, the change in the net electrostatic plus van der Waals contribution to the hydration of BBA is already in excess of the folding free energy reported for this protein.
△ Less
Submitted 28 January, 2025; v1 submitted 4 December, 2024;
originally announced December 2024.
-
Equilibration between Translational and Rotational Modes in Molecular Dynamics Simulations of Rigid Water Requires a Smaller Integration Time-Step Than Often Used
Authors:
Dilipkumar N. Asthagiri,
Thomas L. Beck
Abstract:
In simulations of aqueous systems it is common to freeze the bond vibration and angle bending modes in water to allow for a longer time-step $δt$ for integrating the equations of motion. Thus $δt = 2$ fs is often used in simulating rigid models of water. We simulate the SPC/E model of water using $δt$ from 0.5 fs to 3.0 fs. We find that for all but $δ= 0.5$ fs, equipartition between translational…
▽ More
In simulations of aqueous systems it is common to freeze the bond vibration and angle bending modes in water to allow for a longer time-step $δt$ for integrating the equations of motion. Thus $δt = 2$ fs is often used in simulating rigid models of water. We simulate the SPC/E model of water using $δt$ from 0.5 fs to 3.0 fs. We find that for all but $δ= 0.5$ fs, equipartition between translational and rotational modes is violated: the rotational modes are at a lower temperature than the translation modes. The autocorrelation of the velocities corresponding to the respective modes shows that the rotational relaxation occurs at a time-scale comparable to vibrational periods, invalidating the original assumption for freezing vibrations. $δt$ also influences thermodynamic properties: the mean system potential energies are not converged until $δt = 0.5$ fs, and the excess entropy of hydration of a soft, repulsive cavity is also sensitive to $δt$.
△ Less
Submitted 16 August, 2023;
originally announced August 2023.
-
Probabilistic Modeling of LCF Failure Times Using an Epidemiological Crack Percolation Model
Authors:
M. Harder,
P. Lion,
L. Mäde,
T. Beck,
H. Gottschalk
Abstract:
The analysis of standardized low cycle fatigue (LCF) experiments shows that the failure times widely scatter. Furthermore, mechanical components often fail before the deterministic failure time is reached. A possibility to overcome these problems is to consider probabilistic failure times. Our approach for probabilistic life prediction is based on the microstructure of the metal. Since we focus on…
▽ More
The analysis of standardized low cycle fatigue (LCF) experiments shows that the failure times widely scatter. Furthermore, mechanical components often fail before the deterministic failure time is reached. A possibility to overcome these problems is to consider probabilistic failure times. Our approach for probabilistic life prediction is based on the microstructure of the metal. Since we focus on nickel-base alloys we consider a coarse grained microstructure, with random oriented FCC grains. This leads to random distributed Schmid factors and different anisotropic stress in each grain. To gain crack initiation times, we use Coffin-Manson- Basquin and Ramberg-Osgood equation on stresses corrected with probabilistic Schmid factors.
Using these single grain crack initiation times, we have developed an epidemiological crack growth model over multiple grains. In this mesoscopic crack percolation model, cracked grains induce a stress increase in neighboring grains. This stress increase is realized using a machine learning model trained on data generated from finite element simulations. The resulting crack clusters are evaluated with a failure criterion based on a multimodal stress intensity factor. From the generated failure times, we calculate surface dependent hazard rates using a Monte Carlo framework. We compare the obtained failure time distributions to data from LCF experiments and find good coincidence of predicted and measured scatter bands.
△ Less
Submitted 6 July, 2022;
originally announced July 2022.
-
Effect of local anisotropy on fatigue crack initiation in a coarse grained nickel-base superalloy
Authors:
Benedikt Engel,
Tilmann Beck,
Nadine Moch,
Hanno Gottschalk,
Sebastian Schmitz
Abstract:
In the present work, theoretical approaches, based on grain orientation dependent Young's modulus and Schmid factor are used to describe the influence of local grain orientation on crack initiation behaviour of the coarse grained nickel base superalloy René80. Especially for strongly anisotropic crystal structures with large grain size, such as the investigated material, the local elastic properti…
▽ More
In the present work, theoretical approaches, based on grain orientation dependent Young's modulus and Schmid factor are used to describe the influence of local grain orientation on crack initiation behaviour of the coarse grained nickel base superalloy René80. Especially for strongly anisotropic crystal structures with large grain size, such as the investigated material, the local elastic properties must be taken into account for assessment of fatigue crack initiation. With an extension of Schmid's law, the resulting shear stress amplitude, which triggers local cyclic plastic deformation, can be calculated depending on local Young's modulus and Schmid factor. A Monte Carlo simulation with 100,000 samples shows how random grain orientation affects these parameters. Furthermore, the product of Young's modulus and Schmid factor (called $E\cdot m$) is used as a parameter to determine how grain orientation influences resulting shear stress amplitude for given total strain amplitude. In addition to the theoretical work using that approach, this model is also validated using isothermal LCF experiments by determining local grain orientation influence on the crack initiation site using SEM-EBSD analyses.
△ Less
Submitted 6 June, 2018;
originally announced June 2018.
-
Combined Notch and Size Effect Modeling in a Local Probabilistic Approach for LCF
Authors:
Lucas Mäde,
Sebastian Schmitz,
Hanno Gottschalk,
Tilman Beck
Abstract:
In recent years a local probabilistic model for low cycle fatigue (LCF) based on the statistical size effect has been developed and applied on engineering components. Here, the notch support extension based on the stress gradient effect is described in detail, as well as an FEA-based parameter calibration. An FEA is necessary to simulate non-homogeneous stress fields in non-smooth specimens which…
▽ More
In recent years a local probabilistic model for low cycle fatigue (LCF) based on the statistical size effect has been developed and applied on engineering components. Here, the notch support extension based on the stress gradient effect is described in detail, as well as an FEA-based parameter calibration. An FEA is necessary to simulate non-homogeneous stress fields in non-smooth specimens which exhibit gradients and determine size effects. The hazard density approach and the surface integration over the FEA stress lead to geometry-independent model parameters. Three different materials (superalloys IN-939, Rene80, steel 26NiCrMoV14-5) and three different geometry types (smooth, notch, cooling hole specimens) are considered for a more comprehensive validation of the probabilistic LCF model and to demonstrate its wide application range. At the same time, a reduced testing effort is needed compared to deterministic model predictions with notch support.
△ Less
Submitted 1 September, 2017;
originally announced September 2017.
-
Probabilistic Schmid factors and scatter of LCF life
Authors:
H. Gottschalk,
S. Schmitz,
T. Seibel,
G. Rollmann,
R. Krause,
T. Beck
Abstract:
We investigate the scatter in the cycles to crack initiation for conventionally cast specimens of the superalloy RENE 80 in total strain controlled low cycle fatigue (LCF) tests at 850°C. The grains at the location of crack initiation are investigated using electron backscatter diffraction (EBSD) measurements with scanning electron microscopy (SEM). This results in determination of maximal Schmid…
▽ More
We investigate the scatter in the cycles to crack initiation for conventionally cast specimens of the superalloy RENE 80 in total strain controlled low cycle fatigue (LCF) tests at 850°C. The grains at the location of crack initiation are investigated using electron backscatter diffraction (EBSD) measurements with scanning electron microscopy (SEM). This results in determination of maximal Schmid factors for the slip system that lead to the initiation of the LCF surface crack. It is shown using stress - life and strain - life models, that taking into account the Schmid factor considerable reduces the scatter in LCF life prediction. This is used to propose a probabilistic model for LCF life based on random grain orientations. Using Mote Carlo simulation, we determine the probability distribution for the maximal Schmid factor in an uniaxial stress state under isotropic random orientations of the grain. This is used to calculate failure probabilities under the above mentioned model and to compare them with experimental data. Based on extreme value statistics, it is discussed whether a high maximal Schmid factor can be considered as causally related to an early initiation of an LCF crack and we present some rather surprising experimental evidence. In the last section conclusions are formulated and future directions of research are outlined.
△ Less
Submitted 25 April, 2014;
originally announced May 2014.
-
The influence of water interfacial potentials on ion hydration free energies and density profiles near the surface
Authors:
Thomas L. Beck
Abstract:
The surface or contact potential at the water liquid-vapor interface is discussed in relation to determinations of absolute ion hydration free energies and distributions of ions near the interface. It is shown that, rather than the surface potential itself, the net electrostatic potential at the center of an uncharged solute can aid both in relating differences between tabulations of hydration fre…
▽ More
The surface or contact potential at the water liquid-vapor interface is discussed in relation to determinations of absolute ion hydration free energies and distributions of ions near the interface. It is shown that, rather than the surface potential itself, the net electrostatic potential at the center of an uncharged solute can aid both in relating differences between tabulations of hydration free energies and in explaining differing classical and quantum surface potential estimates. Quantum mechanical results are consistent with conclusions from classical simulations that there is a net driving force that enhances anion density at the surface relative to cations.
△ Less
Submitted 20 September, 2012;
originally announced September 2012.
-
Information Theory and Statistical Mechanics Revisited
Authors:
David M. Rogers,
Thomas L. Beck,
Susan B. Rempe
Abstract:
The statistical mechanics of Gibbs is a juxtaposition of subjective, probabilistic ideas on the one hand and objective, mechanical ideas on the other. In this paper, we follow the path set out by Jaynes, including elements added subsequently to that original work, to explore the consequences of the purely statistical point of view. We show how standard methods in the equilibrium theory could have…
▽ More
The statistical mechanics of Gibbs is a juxtaposition of subjective, probabilistic ideas on the one hand and objective, mechanical ideas on the other. In this paper, we follow the path set out by Jaynes, including elements added subsequently to that original work, to explore the consequences of the purely statistical point of view. We show how standard methods in the equilibrium theory could have been derived simply from a description of the available problem information. In addition, our presentation leads to novel insights into questions associated with symmetry and non-equilibrium statistical mechanics. Two surprising consequences to be explored in further work are that (in)distinguishability factors are automatically predicted from the problem formulation and that a quantity related to the thermodynamic entropy production is found by considering information loss in non-equilibrium processes. Using the problem of ion channel thermodynamics as an example, we illustrate the idea of building up complexity by successively adding information to create progressively more complex descriptions of a physical system. Our result is that such statistical mechanical descriptions can be used to create transparent, computable, experimentally-relevant models that may be informed by more detailed atomistic simulations. We also derive a theory for the kinetic behavior of this system, identifying the nonequilibrium `process' free energy functional. The Gibbs relation for this functional is a fluctuation-dissipation theorem applicable arbitrarily far from equilibrium, that captures the effect of non-local and time-dependent behavior from transient driving forces. Based on this work, it is clear that statistical mechanics is a general tool for constructing the relationships between constraints on system information.
△ Less
Submitted 27 May, 2011;
originally announced May 2011.
-
Resolution and Scale Independent Function Matching Using a String Energy Penalized Spline Prior
Authors:
David M. Rogers,
Thomas L. Beck
Abstract:
The extension of the classical Bayesian penalized spline method to inference on vector-valued functions is considered, with an emphasis on characterizing the suitability of the method for general application.We show that the standard quadratic penalty is exactly analogous to the energy of a stretched string, with the penalty parameter corresponding to its tension. This physical analogy motivate…
▽ More
The extension of the classical Bayesian penalized spline method to inference on vector-valued functions is considered, with an emphasis on characterizing the suitability of the method for general application.We show that the standard quadratic penalty is exactly analogous to the energy of a stretched string, with the penalty parameter corresponding to its tension. This physical analogy motivates a discussion of resolution independence, which we define as the convergence of a computational function estimate to arbitrary accuracy with increasing resolution.The multidimensional context makes direct application of standard procedures for choosing the penalty parameter difficult, and a new method is proposed and compared to the established generalized cross-validation (GCV) and Akaike information criterion (AIC) functions.Our Bayesian method for choosing this parameter is derived by introducing a scal e independence criterion to ensure that simultaneously scaling the function samples and their variances does not significantly change the posterior parameter distribution. Due to the possibility of an exact polynomial fit, numerical issues prevent the use of this prior, and a solution is presented based on adding a st ring zero-point energy. This makes more complicated approaches recently propose d in the literature unnecessary, and eliminates the requirement for sensitivity analysis when the function deviates from the above mentioned polynomial. An important class of problems which can be analyzed by this method are stochastic numerical integrators, which are considered as an example problem. This work represents the first extension of penalized spline methods to inference on multidimensional numerical integrators reported in the literature. Several numerical calculations illustrate the above points and address practical application issues.
△ Less
Submitted 24 March, 2010;
originally announced March 2010.
-
Polarization and Charge Transfer in the Hydration of Chloride Ions
Authors:
Zhen Zhao,
David M. Rogers,
Thomas L. Beck
Abstract:
A theoretical study of the structural and electronic properties of the chloride ion and water molecules in the first hydration shell is presented. The calculations are performed on an ensemble of configurations obtained from molecular dynamics simulations of a single chloride ion in bulk water. The simulations utilize the polarizable AMOEBA force field for trajectory generation, and MP2-level ca…
▽ More
A theoretical study of the structural and electronic properties of the chloride ion and water molecules in the first hydration shell is presented. The calculations are performed on an ensemble of configurations obtained from molecular dynamics simulations of a single chloride ion in bulk water. The simulations utilize the polarizable AMOEBA force field for trajectory generation, and MP2-level calculations are performed to examine the electronic structure properties of the ions and surrounding waters in the external field of more distant waters. The ChelpG method is employed to explore the effective charges and dipoles on the chloride ions and first-shell waters. The Quantum Theory of Atoms in Molecules (QTAIM) is further utilized to examine charge transfer from the anion to surrounding water molecules.
From the QTAIM analysis, 0.2 elementary charges are transferred from the ion to the first-shell water molecules. The default AMOEBA model overestimates the average dipole moment magnitude of the ion compared with the estimated quantum mechanical value. The average magnitude of the dipole moment of the water molecules in the first shell treated at the MP2 level, with the more distant waters handled with an AMOEBA effective charge model, is 2.67 D. This value is close to the AMOEBA result for first-shell waters (2.72 D) and is slightly reduced from the bulk AMOEBA value (2.78 D). The magnitude of the dipole moment of the water molecules in the first solvation shell is most strongly affected by the local water-water interactions and hydrogen bonds with the second solvation shell, rather than by interactions with the ion.
△ Less
Submitted 14 December, 2009; v1 submitted 9 October, 2009;
originally announced October 2009.
-
Quasi-Chemical and Structural Analysis of Polarizable Anion Hydration
Authors:
David M. Rogers,
Thomas L. Beck
Abstract:
Quasi-chemical theory is utilized to analyze the roles of solute polarization and size in determining the structure and thermodynamics of bulk anion hydration for the Hofmeister series Cl$^-$, Br$^-$, and I$^-$. Excellent agreement with experiment is obtained for whole salt hydration free energies using the polarizable AMOEBA force field. The quasi-chemical approach exactly partitions the solvat…
▽ More
Quasi-chemical theory is utilized to analyze the roles of solute polarization and size in determining the structure and thermodynamics of bulk anion hydration for the Hofmeister series Cl$^-$, Br$^-$, and I$^-$. Excellent agreement with experiment is obtained for whole salt hydration free energies using the polarizable AMOEBA force field. The quasi-chemical approach exactly partitions the solvation free energy into inner-shell, outer-shell packing, and outer-shell long-ranged contributions by means of a hard-sphere condition. Small conditioning radii, even well inside the first maximum of the ion-water(oxygen) radial distribution function, result in Gaussian behavior for the long-ranged contribution that dominates the ion hydration free energy. The spatial partitioning allows for a mean-field treatment of the long-ranged contribution, leading to a natural division into first-order electrostatic, induction, and van der Waals terms. The induction piece exhibits the strongest ion polarizability dependence, while the larger-magnitude first-order electrostatic piece yields an opposing but weaker polarizability dependence. In addition, a structural analysis is performed to examine the solvation anisotropy around the anions. As opposed to the hydration free energies, the solvation anisotropy depends more on ion polarizability than on ion size: increased polarizability leads to increased anisotropy. The water dipole moments near the ion are similar in magnitude to bulk water, while the ion dipole moments are found to be significantly larger than those observed in quantum mechanical studies. Possible impacts of the observed over-polarization of the ions on simulated anion surface segregation are discussed.
△ Less
Submitted 14 December, 2009; v1 submitted 9 October, 2009;
originally announced October 2009.
-
Breakdown Current Density of Graphene Nano Ribbons
Authors:
Raghunath Murali,
Yinxiao Yang,
Kevin Brenner,
Thomas Beck,
James D. Meindl
Abstract:
Graphene nanoribbons (GNRs) with widths down to 16 nm have been characterized for their current-carrying capacity. It is found that GNRs exhibit an impressive breakdown current density, on the order of 10^8 A/cm2. The breakdown current density is found to have a reciprocal relationship to GNR resistivity and the data fit points to Joule heating as the likely mechanism of breakdown. The superior…
▽ More
Graphene nanoribbons (GNRs) with widths down to 16 nm have been characterized for their current-carrying capacity. It is found that GNRs exhibit an impressive breakdown current density, on the order of 10^8 A/cm2. The breakdown current density is found to have a reciprocal relationship to GNR resistivity and the data fit points to Joule heating as the likely mechanism of breakdown. The superior current-carrying capacity of GNRs will be valuable for their application in on-chip electrical interconnects. The thermal conductivity of sub-20 nm graphene ribbons is found to be more than 1000 W/m-K.
△ Less
Submitted 22 June, 2009;
originally announced June 2009.
-
Resistivity of Graphene Nanoribbon Interconnects
Authors:
Raghunath Murali,
Kevin Brenner,
Yinxiao Yang,
Thomas Beck,
James D. Meindl
Abstract:
Graphene nanoribbon interconnects are fabricated, and the extracted resistivity is compared to that of Cu. It is found that the average resistivity at a given line-width (18nm<W<52nm) is about 3X that of a Cu wire, whereas the best GNR has a resistivity comparable to that of Cu. The conductivity is found to be limited by impurity scattering as well as LER scattering; as a result, the best report…
▽ More
Graphene nanoribbon interconnects are fabricated, and the extracted resistivity is compared to that of Cu. It is found that the average resistivity at a given line-width (18nm<W<52nm) is about 3X that of a Cu wire, whereas the best GNR has a resistivity comparable to that of Cu. The conductivity is found to be limited by impurity scattering as well as LER scattering; as a result, the best reported GNR resistivity is 3X the limit imposed by substrate phonon scattering. This study reveals that even moderate-quality graphene nanowires have the potential to outperform Cu for use as on-chip interconnects.
△ Less
Submitted 4 June, 2009;
originally announced June 2009.
-
Modeling molecular and ionic absolute solvation free energies with quasi-chemical theory bounds
Authors:
David M. Rogers,
Thomas L. Beck
Abstract:
A recently developed statistical mechanical Quasi-Chemical Theory (QCT) has led to significant insights into solvation phenomena for both hydrophilic and hydrophobic solutes. The QCT exactly partitions solvation free energies into three components: 1) inner-shell chemical, 2) outer-shell packing, and 3) outer-shell long-ranged contributions. In this paper, we discuss efficient methods for comput…
▽ More
A recently developed statistical mechanical Quasi-Chemical Theory (QCT) has led to significant insights into solvation phenomena for both hydrophilic and hydrophobic solutes. The QCT exactly partitions solvation free energies into three components: 1) inner-shell chemical, 2) outer-shell packing, and 3) outer-shell long-ranged contributions. In this paper, we discuss efficient methods for computing each of the three parts of the free energy. A Bayesian estimation approach is developed to compute the inner-shell chemical and outer-shell packing contributions. We derive upper and lower bounds on the outer-shell long-ranged portion of the free energy by expressing this component in two equivalent ways. Local, high energy contacts between solute and solvent are eliminated by spatial conditioning in this free energy piece, leading to near-Gaussian distributions of solute-solvent interactions energies. Thus, the average of the two mean-field bounds yields an accurate and efficient free energy estimate. Aqueous solvation free energy results are presented for several solutes, including methane, perfluoromethane, water, and the sodium and chloride ions. The results demonstrate the accuracy and efficiency of the methods. The approach should prove useful in computing solvation free energies in inhomogeneous, restricted environments.
△ Less
Submitted 9 September, 2008;
originally announced September 2008.
-
TransPath: A Computational Method to Study the Ion Transit Pathways in Membrane Channels
Authors:
Z. Kuang,
A. Liu,
T. L. Beck
Abstract:
The finely tuned structures of membrane channels allow selective passage of ions through the available aqueous pores. In order to understand channel function, it is crucial to locate the pore and study its physical and chemical properties. Recently obtained X-ray crystal structures of bacterial chloride channel homologues reveal a complicated topology with curvilinear pores. The commonly used HO…
▽ More
The finely tuned structures of membrane channels allow selective passage of ions through the available aqueous pores. In order to understand channel function, it is crucial to locate the pore and study its physical and chemical properties. Recently obtained X-ray crystal structures of bacterial chloride channel homologues reveal a complicated topology with curvilinear pores. The commonly used HOLE program encounters difficulties in studying such pores. Here we propose a new pore-searching algorithm (TransPath) which uses the Configurational Bias Monte Carlo (CBMC) method to generate transmembrane trajectories driven by both geometric and electrostatic features. The trajectories are binned into groups determined by a vector distance criterion.
From each group, a representative trajectory is selected based on the Rosenbluth weight, and the geometrically optimal path is obtained by simulated annealing. Candidate ion pathways can then be determined by analysis of the radius and potential profiles. The proposed method and its implementation are illustrated using the bacterial KcsA potassium channel as an example. The procedure is then applied to the more complex structures of the bacterial E. coli ClC channel homologues.
△ Less
Submitted 22 July, 2005;
originally announced July 2005.
-
Multiscale Algorithms for Eigenvalue Problems
Authors:
Nimal Wijesekera,
Guogang Feng,
Thomas L. Beck
Abstract:
Iterative multiscale methods for electronic structure calculations offer several advantages for large-scale problems. Here we examine a nonlinear full approximation scheme (FAS) multigrid method for solving fixed potential and self-consistent eigenvalue problems. In principle, the expensive orthogonalization and Ritz projection operations can be moved to coarse levels, thus substantially reducin…
▽ More
Iterative multiscale methods for electronic structure calculations offer several advantages for large-scale problems. Here we examine a nonlinear full approximation scheme (FAS) multigrid method for solving fixed potential and self-consistent eigenvalue problems. In principle, the expensive orthogonalization and Ritz projection operations can be moved to coarse levels, thus substantially reducing the overall computational expense. Results of the nonlinear multiscale approach are presented for simple fixed potential problems and for self-consistent pseudopotential calculations on large molecules. It is shown that, while excellent efficiencies can be obtained for problems with small numbers of states or well-defined eigenvalue cluster structure, the algorithm in its original form stalls for large-molecule problems with tens of occupied levels. Work is in progress to attempt to alleviate those difficulties.
△ Less
Submitted 16 April, 2003;
originally announced April 2003.
-
Real-Space Mesh Techniques in Density Functional Theory
Authors:
Thomas L. Beck
Abstract:
This review discusses progress in efficient solvers which have as their foundation a representation in real space, either through finite-difference or finite-element formulations. The relationship of real-space approaches to linear-scaling electrostatics and electronic structure methods is first discussed. Then the basic aspects of real-space representations are presented. Multigrid techniques f…
▽ More
This review discusses progress in efficient solvers which have as their foundation a representation in real space, either through finite-difference or finite-element formulations. The relationship of real-space approaches to linear-scaling electrostatics and electronic structure methods is first discussed. Then the basic aspects of real-space representations are presented. Multigrid techniques for solving the discretized problems are covered; these numerical schemes allow for highly efficient solution of the grid-based equations. Applications to problems in electrostatics are discussed, in particular numerical solutions of Poisson and Poisson-Boltzmann equations. Next, methods for solving self-consistent eigenvalue problems in real space are presented; these techniques have been extensively applied to solutions of the Hartree-Fock and Kohn-Sham equations of electronic structure, and to eigenvalue problems arising in semiconductor and polymer physics. Finally, real-space methods have found recent application in computations of optical response and excited states in time-dependent density functional theory, and these computational developments are summarized. Multiscale solvers are competitive with the most efficient available plane-wave techniques in terms of the number of self-consistency steps required to reach the ground state, and they require less work in each self-consistency update on a uniform grid. Besides excellent efficiencies, the decided advantages of the real-space multiscale approach are 1) the near-locality of each function update, 2) the ability to handle global eigenfunction constraints and potential updates on coarse levels, and 3) the ability to incorporate adaptive local mesh refinements without loss of optimal multigrid efficiencies.
△ Less
Submitted 14 June, 2000;
originally announced June 2000.
-
Efficient Real Space Solution of the Kohn-Sham Equations with Multiscale Techniques
Authors:
Jian Wang,
Thomas L. Beck
Abstract:
We present a multigrid algorithm for self consistent solution of the Kohn-Sham equations in real space. The entire problem is discretized on a real space mesh with a high order finite difference representation. The resulting self consistent equations are solved on a heirarchy of grids of increasing resolution with a nonlinear Full Approximation Scheme, Full Multigrid algorithm. The self consiste…
▽ More
We present a multigrid algorithm for self consistent solution of the Kohn-Sham equations in real space. The entire problem is discretized on a real space mesh with a high order finite difference representation. The resulting self consistent equations are solved on a heirarchy of grids of increasing resolution with a nonlinear Full Approximation Scheme, Full Multigrid algorithm. The self consistency is effected by updates of the Poisson equation and the exchange correlation potential at the end of each eigenfunction correction cycle. The algorithm leads to highly efficient solution of the equations, whereby the ground state electron distribution is obtained in only two or three self consistency iterations on the finest scale.
△ Less
Submitted 28 May, 1999;
originally announced May 1999.
