-
Volume dependence of microwave induced excess quasiparticles in superconducting resonators
Authors:
Steven A. H. de Rooij,
Jochem J. A. Baselmans,
Juan Bueno,
Vignesh Murugesan,
David J. Thoen,
Pieter J. de Visser
Abstract:
The presence of quasiparticles typically degrades the performance of superconducting microwave circuits. The readout signal can generate non-equilibrium quasiparticles, which lead to excess microwave loss and decoherence. To understand this effect quantitatively, we measure quasiparticle fluctuations and extract the quasiparticle density across different temperatures, readout powers, and resonator…
▽ More
The presence of quasiparticles typically degrades the performance of superconducting microwave circuits. The readout signal can generate non-equilibrium quasiparticles, which lead to excess microwave loss and decoherence. To understand this effect quantitatively, we measure quasiparticle fluctuations and extract the quasiparticle density across different temperatures, readout powers, and resonator volumes. We find that microwave power generates a higher quasiparticle density as the active resonator volume is reduced and show that this effect sets a sensitivity limit on kinetic inductance detectors. We compare our results with theoretical models of direct microwave photon absorption by quasiparticles and conclude that an unknown, indirect mechanism plays a dominant role in quasiparticle generation. These results provide a route to mitigate quasiparticle generation due to readout power in superconducting devices.
△ Less
Submitted 10 March, 2025;
originally announced March 2025.
-
Recombination of localized quasiparticles in disordered superconductors
Authors:
Steven A. H. de Rooij,
Remko Fermin,
Kevin Kouwenhoven,
Tonny Coppens,
Vignesh Murugesan,
David J. Thoen,
Jan Aarts,
Jochem J. A. Baselmans,
Pieter J. de Visser
Abstract:
Disordered superconductors offer new impedance regimes for quantum circuits, enable a pathway to protected qubits and improve superconducting single photon detectors due to their high kinetic inductance and sheet resistance. However, the relaxation of quasiparticles, which cause decoherence and microwave loss, is drastically affected by disorder, which is still not understood. We address this issu…
▽ More
Disordered superconductors offer new impedance regimes for quantum circuits, enable a pathway to protected qubits and improve superconducting single photon detectors due to their high kinetic inductance and sheet resistance. However, the relaxation of quasiparticles, which cause decoherence and microwave loss, is drastically affected by disorder, which is still not understood. We address this issue by measuring the quasiparticle relaxation time in a disordered $β$-Ta film, which we pattern as the inductor of a microwave resonator. We observe that the quasiparticle relaxation time is governed by the phonon scattering time and is independent on the phononic environment, which is in stark contrast to the relaxation of quasiparticles in ordered superconductors. We explain these observations in terms of the recombination of localized quasiparticles that first delocalize via phonon scattering. We analyse quasiparticle relaxation measurements on superconductors with different degrees of disorder and conclude that this phenomenon is inherent to disordered superconductors.
△ Less
Submitted 24 October, 2024;
originally announced October 2024.
-
Vibrational modes as the origin of dielectric loss at 0.27$\unicode{x2013}$100 THz in a-SiC:H
Authors:
B. T. Buijtendorp,
A. Endo,
W. Jellema,
K. Karatsu,
K. Kouwenhoven,
D. Lamers,
A. J. van der Linden,
K. Rostem,
M. Veen,
E. J. Wollack,
J. J. A. Baselmans,
S. Vollebregt
Abstract:
Low-loss deposited dielectrics are beneficial for the advancement of superconducting integrated circuits for astronomy. In the microwave band ($\mathrm{\sim}$1$\unicode{x2013}$10 GHz) the cryogenic and low-power dielectric loss is dominated by two-level systems. However, the origin of the loss in the millimeter-submillimeter band ($\mathrm{\sim}$0.1$\unicode{x2013}$1 THz) is not understood. We mea…
▽ More
Low-loss deposited dielectrics are beneficial for the advancement of superconducting integrated circuits for astronomy. In the microwave band ($\mathrm{\sim}$1$\unicode{x2013}$10 GHz) the cryogenic and low-power dielectric loss is dominated by two-level systems. However, the origin of the loss in the millimeter-submillimeter band ($\mathrm{\sim}$0.1$\unicode{x2013}$1 THz) is not understood. We measured the loss of hydrogenated amorphous SiC (a-SiC:H) films in the 0.27$\unicode{x2013}$100 THz range using superconducting microstrip resonators and Fourier-transform spectroscopy. The agreement between the loss data and a Maxwell-Helmholtz-Drude dispersion model suggests that vibrational modes above 10 THz dominate the loss in the a-SiC:H above 200 GHz.
△ Less
Submitted 18 May, 2025; v1 submitted 22 May, 2024;
originally announced May 2024.
-
Geometry dependence of TLS noise and loss in a-SiC:H parallel plate capacitors for superconducting microwave resonators
Authors:
K. Kouwenhoven,
G. P. J. van Doorn,
B. T. Buijtendorp,
S. A. H. de Rooij,
D. Lamers,
D. J. Thoen,
V. Murugesan,
J. J. A. Baselmans,
P. J. de Visser
Abstract:
Parallel plate capacitors (PPC) significantly reduce the size of superconducting microwave resonators, reducing the pixel pitch for arrays of single photon energy-resolving kinetic inductance detectors (KIDs). The frequency noise of KIDs is typically limited by tunneling Two-Level Systems (TLS), which originate from lattice defects in the dielectric materials required for PPCs. How the frequency n…
▽ More
Parallel plate capacitors (PPC) significantly reduce the size of superconducting microwave resonators, reducing the pixel pitch for arrays of single photon energy-resolving kinetic inductance detectors (KIDs). The frequency noise of KIDs is typically limited by tunneling Two-Level Systems (TLS), which originate from lattice defects in the dielectric materials required for PPCs. How the frequency noise level depends on the PPC's dimensions has not been experimentally addressed. We measure the frequency noise of 56 resonators with a-SiC:H PPCs, which cover a factor 44 in PPC area and a factor 4 in dielectric thickness. To support the noise analysis, we measure the TLS-induced, power-dependent, intrinsic loss and temperature-dependent resonance frequency shift of the resonators. From the TLS models, we expect a geometry-independent microwave loss and resonance frequency shift, set by the TLS properties of the dielectric. However, we observe a thickness-dependent microwave loss and resonance frequency shift, explained by surface layers that limit the performance of PPC-based resonators. For a uniform dielectric, the frequency noise level should scale directly inversely with the PPC area and thickness. We observe that an increase in PPC size reduces the frequency noise, but the exact scaling is, in some cases, weaker than expected. Finally, we derive an engineering guideline for the design of KIDs based on PPC-based resonators.
△ Less
Submitted 8 May, 2024; v1 submitted 21 November, 2023;
originally announced November 2023.
-
Resolving Power of Visible to Near-Infrared Hybrid $β$-Ta/NbTiN Kinetic Inductance Detectors
Authors:
Kevin Kouwenhoven,
Daniel Fan,
Enrico Biancalani,
Steven A. H. de Rooij,
Tawab Karim,
Carlas S. Smith,
Vignesh Murugesan,
David J. Thoen,
Jochem J. A. Baselmans,
Pieter J. de Visser
Abstract:
Kinetic Inductance Detectors (KIDs) are superconducting energy-resolving detectors, sensitive to single photons from the near-infrared to ultraviolet. We study a hybrid KID design consisting of a beta phase tantalum ($β$-Ta) inductor and a NbTiN interdigitated capacitor (IDC). The devices show an average intrinsic quality factor $Q_i$ of 4.3$\times10^5$ $\pm$ 1.3 $\times10^5$. To increase the powe…
▽ More
Kinetic Inductance Detectors (KIDs) are superconducting energy-resolving detectors, sensitive to single photons from the near-infrared to ultraviolet. We study a hybrid KID design consisting of a beta phase tantalum ($β$-Ta) inductor and a NbTiN interdigitated capacitor (IDC). The devices show an average intrinsic quality factor $Q_i$ of 4.3$\times10^5$ $\pm$ 1.3 $\times10^5$. To increase the power captured by the light sensitive inductor, we 3D-print an array of 150$\times$150 $μ$m resin micro lenses on the backside of the sapphire substrate. The shape deviation between design and printed lenses is smaller than 1$μ$m, and the alignment accuracy of this process is $δ_x = +5.8 \pm 0.5$ $μ$m and $δ_y = +8.3 \pm 3.3$ $μ$m. We measure a resolving power for 1545-402 nm that is limited to 4.9 by saturation in the KID's phase response. We can model the saturation in the phase response with the evolution of the number of quasiparticles generated by a photon event. An alternative coordinate system that has a linear response raises the resolving power to 5.9 at 402 nm. We verify the measured resolving power with a two-line measurement using a laser source and a monochromator. We discuss several improvements that can be made to the devices on a route towards KID arrays with high resolving powers.
△ Less
Submitted 13 February, 2023; v1 submitted 12 July, 2022;
originally announced July 2022.
-
Hydrogenated Amorphous Silicon Carbide: A Low-loss Deposited Dielectric for Microwave to Submillimeter Wave Superconducting Circuits
Authors:
B. T. Buijtendorp,
S. Vollebregt,
K. Karatsu,
D. J. Thoen,
V. Murugesan,
K. Kouwenhoven,
S. Hähnle,
J. J. A. Baselmans,
A. Endo
Abstract:
Low-loss deposited dielectrics will benefit superconducting devices such as integrated superconducting spectrometers, superconducting qubits and kinetic inductance parametric amplifiers. Compared with planar structures, multi-layer structures such as microstrips are more compact and eliminate radiation loss at high frequencies. Multi-layer structures are most easily fabricated with deposited diele…
▽ More
Low-loss deposited dielectrics will benefit superconducting devices such as integrated superconducting spectrometers, superconducting qubits and kinetic inductance parametric amplifiers. Compared with planar structures, multi-layer structures such as microstrips are more compact and eliminate radiation loss at high frequencies. Multi-layer structures are most easily fabricated with deposited dielectrics, which typically exhibit higher dielectric loss than crystalline dielectrics. We measured the sub-kelvin and low-power microwave and mm-submm wave dielectric loss of hydrogenated amorphous silicon carbide (a-SiC:H), using a superconducting chip with NbTiN/a-SiC:H/NbTiN microstrip resonators. We deposited the a-SiC:H by plasma-enhanced chemical vapor deposition at a substrate temperature of 400°C. The a-SiC:H has a mm-submm loss tangent ranging from $0.80 \pm 0.01 \times 10^{-4}$ to $1.43 \pm 0.04 \times 10^{-4}$ in the range of 270 to 385 GHz. The microwave loss tangent is $3.2 \pm 0.2 \times 10^{-5}$. These are the lowest low-power sub-kelvin loss tangents that have been reported for microstrip resonators at mm-submm and microwave frequencies. We observe that the loss tangent increases with frequency. The a-SiC:H films are free of blisters and have low stress: $-$20 MPa compressive at 200 nm thickness to 60 MPa tensile at 1000 nm thickness.
△ Less
Submitted 7 October, 2021;
originally announced October 2021.
-
Phonon-trapping enhanced energy resolution in superconducting single photon detectors
Authors:
Pieter J. de Visser,
Steven A. H. de Rooij,
Vignesh Murugesan,
David J. Thoen,
Jochem J. A. Baselmans
Abstract:
A noiseless, photon counting detector, which resolves the energy of each photon, could radically change astronomy, biophysics and quantum optics. Superconducting detectors promise an intrinsic resolving power at visible wavelengths of $R=E/δE\approx100$ due to their low excitation energy. We study superconducting energy-resolving Microwave Kinetic Inductance Detectors (MKIDs), which hold particula…
▽ More
A noiseless, photon counting detector, which resolves the energy of each photon, could radically change astronomy, biophysics and quantum optics. Superconducting detectors promise an intrinsic resolving power at visible wavelengths of $R=E/δE\approx100$ due to their low excitation energy. We study superconducting energy-resolving Microwave Kinetic Inductance Detectors (MKIDs), which hold particular promise for larger cameras. A visible/near-infrared photon absorbed in the superconductor creates a few thousand quasiparticles through several stages of electron-phonon interaction. Here we demonstrate experimentally that the resolving power of MKIDs at visible to near-infrared wavelengths is limited by the loss of hot phonons during this process. We measure the resolving power of our aluminum-based detector as a function of photon energy using four lasers with wavelengths between $1545-402$ nm. For detectors on thick SiN/Si and sapphire substrates the resolving power is limited to $10-21$ for the respective wavelengths, consistent with the loss of hot phonons. When we suspend the sensitive part of the detector on a 110 nm thick SiN membrane, the measured resolving power improves to $19-52$ respectively. The improvement is equivalent to a factor $8\pm2$ stronger phonon trapping on the membrane, which is consistent with a geometrical phonon propagation model for these hot phonons. We discuss a route towards the Fano limit by phonon engineering.
△ Less
Submitted 11 March, 2021;
originally announced March 2021.
-
Strong Reduction of Quasiparticle Fluctuations in a Superconductor due to Decoupling of the Quasiparticle Number and Lifetime
Authors:
Steven A. H. de Rooij,
Jochem J. A. Baselmans,
Vignesh Murugesan,
David J. Thoen,
Pieter J. de Visser
Abstract:
We measure temperature dependent quasiparticle fluctuations in a small Al volume, embedded in a NbTiN superconducting microwave resonator. The resonator design allows for read-out close to equilibrium. By placing the Al film on a membrane, we enhance the fluctuation level and separate quasiparticle from phonon effects. When lowering the temperature, the recombination time saturates and the fluctua…
▽ More
We measure temperature dependent quasiparticle fluctuations in a small Al volume, embedded in a NbTiN superconducting microwave resonator. The resonator design allows for read-out close to equilibrium. By placing the Al film on a membrane, we enhance the fluctuation level and separate quasiparticle from phonon effects. When lowering the temperature, the recombination time saturates and the fluctuation level reduces a factor $\sim$100. From this we deduce that the number of free quasiparticles is still thermal. Therefore, the theoretical, inverse relation between quasiparticle number and recombination time is invalid in this experiment. This is consistent with quasiparticle trapping, where on-trap recombination limits the observed quasiparticle lifetime.
△ Less
Submitted 24 November, 2021; v1 submitted 8 March, 2021;
originally announced March 2021.
-
Characterization of low-loss hydrogenated amorphous silicon films for superconducting resonators
Authors:
Bruno T. Buijtendorp,
Juan Bueno,
David J. Thoen,
Vignesh Murugesan,
Paolo M. Sberna,
Jochem J. A. Baselmans,
Sten Vollebregt,
Akira Endo
Abstract:
Superconducting resonators used in millimeter-submillimeter astronomy would greatly benefit from deposited dielectrics with a small dielectric loss. We deposited hydrogenated amorphous silicon films using plasma-enhanced chemical vapor deposition, at substrate temperatures of 100°C, 250°C and 350°C. The measured void volume fraction, hydrogen content, microstructure parameter, and bond-angle disor…
▽ More
Superconducting resonators used in millimeter-submillimeter astronomy would greatly benefit from deposited dielectrics with a small dielectric loss. We deposited hydrogenated amorphous silicon films using plasma-enhanced chemical vapor deposition, at substrate temperatures of 100°C, 250°C and 350°C. The measured void volume fraction, hydrogen content, microstructure parameter, and bond-angle disorder are negatively correlated with the substrate temperature. All three films have a loss tangent below $10^{-5}$ for a resonator energy of $10^5$ photons, at 120 mK and 4-7 GHz. This makes these films promising for microwave kinetic inductance detectors and on-chip millimeter-submilimeter filters.
△ Less
Submitted 14 December, 2020;
originally announced December 2020.
-
Simulating the radiation loss of superconducting submillimeter wave filters and transmission lines using Sonnet EM
Authors:
Akira Endo,
Alejandro Pascual Laguna,
Sebastian Hähnle,
Kenichi Karatsu,
David J. Thoen,
Vignesh Murugesan,
Jochem J. A. Baselmans
Abstract:
Superconducting resonators and transmission lines are fundamental building blocks of integrated circuits for millimeter-submillimeter astronomy. Accurate simulation of radiation loss from the circuit is crucial for the design of these circuits because radiation loss increases with frequency, and can thereby deteriorate the system performance. Here we show a stratification for a 2.5-dimensional met…
▽ More
Superconducting resonators and transmission lines are fundamental building blocks of integrated circuits for millimeter-submillimeter astronomy. Accurate simulation of radiation loss from the circuit is crucial for the design of these circuits because radiation loss increases with frequency, and can thereby deteriorate the system performance. Here we show a stratification for a 2.5-dimensional method-of-moment simulator Sonnet EM that enables accurate simulations of the radiative resonant behavior of submillimeter-wave coplanar resonators and straight coplanar waveguides (CPWs). The Sonnet simulation agrees well with the measurement of the transmission through a coplanar resonant filter at 374.6 GHz. Our Sonnet stratification utilizes artificial lossy layers below the lossless substrate to absorb the radiation, and we use co-calibrated internal ports for de-embedding. With this type of stratification, Sonnet can be used to model superconducting millimeter-submillimeter wave circuits even when radiation loss is a potential concern.
△ Less
Submitted 13 December, 2020;
originally announced December 2020.
-
Mitigation of Cosmic Ray Effect on Microwave Kinetic Inductance Detector Arrays
Authors:
K. Karatsu,
A. Endo,
J. Bueno,
P. J. de Visser,
R. Barends,
D. J. Thoen,
V. Murugesan,
N. Tomita,
J. J. A. Baselmans
Abstract:
For space observatories, the glitches caused by high energy phonons created by the interaction of cosmic ray particles with the detector substrate lead to dead time during observation. Mitigating the impact of cosmic rays is therefore an important requirement for detectors to be used in future space missions. In order to investigate possible solutions, we carry out a systematic study by testing fo…
▽ More
For space observatories, the glitches caused by high energy phonons created by the interaction of cosmic ray particles with the detector substrate lead to dead time during observation. Mitigating the impact of cosmic rays is therefore an important requirement for detectors to be used in future space missions. In order to investigate possible solutions, we carry out a systematic study by testing four large arrays of Microwave Kinetic Inductance Detectors (MKIDs), each consisting of $\sim$960 pixels and fabricated on monolithic 55 mm $\times$ 55 mm $\times$ 0.35 mm Si substrates. We compare the response to cosmic ray interactions in our laboratory for different detector arrays: A standard array with only the MKID array as reference; an array with a low $T_c$ superconducting film as phonon absorber on the opposite side of the substrate; and arrays with MKIDs on membranes. The idea is that the low $T_c$ layer down-converts the phonon energy to values below the pair breaking threshold of the MKIDs, and the membranes isolate the sensitive part of the MKIDs from phonons created in the substrate. We find that the dead time can be reduced up to a factor of 40 when compared to the reference array. Simulations show that the dead time can be reduced to below 1 % for the tested detector arrays when operated in a spacecraft in an L2 or a similar far-Earth orbit. The technique described here is also applicable and important for large superconducting qubit arrays for future quantum computers.
△ Less
Submitted 10 January, 2019; v1 submitted 8 January, 2019;
originally announced January 2019.
-
Superconducting NbTiN Thin Films with Highly Uniform Properties over a 100 mm diameter Wafer
Authors:
D. J. Thoen,
B. G. C. Bos,
E. A. F. Haalebos,
T. M. Klapwijk,
J. J. A. Baselmans,
A. Endo
Abstract:
Uniformity in thickness and electronic properties of superconducting niobium titanium nitride (NbTiN) thin films is a critical issue for upscaling superconducting electronics, such as microwave kinetic inductance detectors for submillimeter wave astronomy. In this article we make an experimental comparison between the uniformity of NbTiN thin films produced by two DC magnetron sputtering systems w…
▽ More
Uniformity in thickness and electronic properties of superconducting niobium titanium nitride (NbTiN) thin films is a critical issue for upscaling superconducting electronics, such as microwave kinetic inductance detectors for submillimeter wave astronomy. In this article we make an experimental comparison between the uniformity of NbTiN thin films produced by two DC magnetron sputtering systems with vastly different target sizes: the Nordiko 2000 equipped with a circular 100mm diameter target, and the Evatec LLS801 with a rectangular target of 127 mm x 444.5 mm. In addition to the films deposited staticly in both systems, we have also deposited films in the LLS801 while shuttling the substrate in front of the target, with the aim of further enhancing the uniformity. Among these three setups, the LLS801 system with substrate shuttling has yielded the highest uniformity in film thickness (+/-2%), effective resistivity (decreasing by 5% from center to edge), and superconducting critical temperature (T_c = 15.0 K - 15.3 K) over a 100 mm diameter wafer. However, the shuttling appears to increase the resistivity by almost a factor of 2 compared to static deposition. Surface SEM inspections suggest that the shuttling could have induced a different mode of microstructural film growth.
△ Less
Submitted 22 November, 2016; v1 submitted 6 September, 2016;
originally announced September 2016.
-
Reactive magnetron sputter deposition of superconducting niobium titanium nitride thin films with different target sizes
Authors:
B. G. C. Bos,
D. J. Thoen,
E. A. F. Haalebos,
P. M. L. Gimbel,
T. M. Klapwijk,
J. J. A. Baselmans,
A. Endo
Abstract:
The superconducting critical temperature (Tc > 15K) of niobium titanium nitride (NbTiN) thin films allows for low-loss circuits up to 1.1 THz, enabling on-chip spectroscopy and multi-pixel imaging with advanced detectors. The drive for large scale detector microchips is demanding NbTiN films with uniform properties over an increasingly larger area. This article provides an experimental comparison…
▽ More
The superconducting critical temperature (Tc > 15K) of niobium titanium nitride (NbTiN) thin films allows for low-loss circuits up to 1.1 THz, enabling on-chip spectroscopy and multi-pixel imaging with advanced detectors. The drive for large scale detector microchips is demanding NbTiN films with uniform properties over an increasingly larger area. This article provides an experimental comparison between two reactive d.c. sputter systems with different target sizes: a small target (100mm diameter) and a large target (127 mm x 444.5 mm). This article focuses on maximizing the Tc of the films and the accompanying I-V characteristics of the sputter plasma, and we find that both systems are capable of depositing films with Tc > 15 K. The resulting film uniformity is presented in a second manuscript in this volume. We find that these films are deposited within the transition from metallic to compound sputtering, at the point where target nitridation most strongly depends on nitrogen flow. Key in the deposition optimization is to increase the system's pumping speed and gas flows to counteract the hysteretic effects induced by the target size. Using the I-V characteristics as a guide proves to be an effective way to optimize a reactive sputter system, for it can show whether the optimal deposition regime is hysteresis-free and accessible.
△ Less
Submitted 22 November, 2016; v1 submitted 5 September, 2016;
originally announced September 2016.
-
The non-equilibrium response of a superconductor to pair-breaking radiation measured over a broad frequency band
Authors:
P. J. de Visser,
S. J. C. Yates,
T. Guruswamy,
D. J. Goldie,
S. Withington,
A. Neto,
N. Llombart,
A. M. Baryshev,
T. M. Klapwijk,
J. J. A. Baselmans
Abstract:
We have measured the absorption of terahertz radiation in a BCS superconductor over a broad range of frequencies from 200 GHz to 1.1 THz, using a broadband antenna-lens system and a tantalum microwave resonator. From low frequencies, the response of the resonator rises rapidly to a maximum at the gap edge of the superconductor. From there on the response drops to half the maximum response at twice…
▽ More
We have measured the absorption of terahertz radiation in a BCS superconductor over a broad range of frequencies from 200 GHz to 1.1 THz, using a broadband antenna-lens system and a tantalum microwave resonator. From low frequencies, the response of the resonator rises rapidly to a maximum at the gap edge of the superconductor. From there on the response drops to half the maximum response at twice the pair-breaking energy. At higher frequencies, the response rises again due to trapping of pair-breaking phonons in the superconductor. In practice this is the first measurement of the frequency dependence of the quasiparticle creation efficiency due to pair-breaking in a superconductor. The efficiency, calculated from the different non-equilibrium quasiparticle distribution functions at each frequency, is in agreement with the measurements.
△ Less
Submitted 22 May, 2015;
originally announced May 2015.
-
Performance of Hybrid NbTiN-Al Microwave Kinetic Inductance Detectors as Direct Detectors for Sub-millimeter Astronomy
Authors:
R. M. J. Janssen,
J. J. A. Baselmans,
A. Endo,
L. Ferrari,
S. J. C. Yates,
A. M. Baryshev,
T. M. Klapwijk
Abstract:
In the next decades millimeter and sub-mm astronomy requires large format imaging arrays and broad-band spectrometers to complement the high spatial and spectral resolution of the Atacama Large Millimeter/sub-millimeter Array. The desired sensors for these instruments should have a background limited sensitivity and a high optical efficiency and enable arrays thousands of pixels in size. Hybrid mi…
▽ More
In the next decades millimeter and sub-mm astronomy requires large format imaging arrays and broad-band spectrometers to complement the high spatial and spectral resolution of the Atacama Large Millimeter/sub-millimeter Array. The desired sensors for these instruments should have a background limited sensitivity and a high optical efficiency and enable arrays thousands of pixels in size. Hybrid microwave kinetic inductance detectors consisting of NbTiN and Al have shown to satisfy these requirements. We present the second generation hybrid NbTiN-Al MKIDs, which are photon noise limited in both phase and amplitude readout for loading levels $P_{850GHz} \geq 10$ fW. Thanks to the increased responsivity, the photon noise level achieved in phase allows us to simultaneously read out approximately 8000 pixels using state-of-the-art electronics. In addition, the choice of superconducting materials and the use of a Si lens in combination with a planar antenna gives these resonators the flexibility to operate within the frequency range $0.09 < ν< 1.1$ THz. Given these specifications, hybrid NbTiN-Al MKIDs will enable astronomically usable kilopixel arrays for sub-mm imaging and moderate resolution spectroscopy.
△ Less
Submitted 14 August, 2014;
originally announced August 2014.
-
Equivalence of Optical and Electrical Noise Equivalent Power of Hybrid NbTiN-Al Microwave Kinetic Inductance Detectors
Authors:
R. M. J. Janssen,
A. Endo,
P. J. de Visser,
T. M. Klapwijk,
J. J. A. Baselmans
Abstract:
We have measured and compared the response of hybrid NbTiN-Al Microwave Kinetic Inductance Detectors (MKIDs) to changes in bath temperature and illumination by sub-mm radiation. We show that these two stimulants have an equivalent effect on the resonance feature of hybrid MKIDs. We determine an electrical NEP from the measured temperature responsivity, quasiparticle recombination time, superconduc…
▽ More
We have measured and compared the response of hybrid NbTiN-Al Microwave Kinetic Inductance Detectors (MKIDs) to changes in bath temperature and illumination by sub-mm radiation. We show that these two stimulants have an equivalent effect on the resonance feature of hybrid MKIDs. We determine an electrical NEP from the measured temperature responsivity, quasiparticle recombination time, superconducting transition temperature and noise spectrum, all of which can be measured in a dark environment. For the two hybrid NbTiN-Al MKIDs studied in detail the electrical NEP is within a factor of two of the optical NEP, which is measured directly using a blackbody source.
△ Less
Submitted 17 November, 2014; v1 submitted 14 August, 2014;
originally announced August 2014.
-
Anomalous response of superconducting titanium nitride resonators to terahertz radiation
Authors:
J. Bueno,
P. C. J. J. Coumou,
G. Zheng,
P. J. de Visser,
T. M. Klapwijk,
E. F. C. Driessen,
S. Doyle,
J. J. A Baselmans
Abstract:
We present an experimental study of KIDs fabricated of atomic layer deposited TiN films, and characterized at radiation frequencies of $350$~GHz. The responsivity to radiation is measured and found to increase with increasing radiation powers, opposite to what is expected from theory and observed for hybrid niobium titanium nitride / aluminium (NbTiN/Al) and all-aluminium (all-Al) KIDs. The noise…
▽ More
We present an experimental study of KIDs fabricated of atomic layer deposited TiN films, and characterized at radiation frequencies of $350$~GHz. The responsivity to radiation is measured and found to increase with increasing radiation powers, opposite to what is expected from theory and observed for hybrid niobium titanium nitride / aluminium (NbTiN/Al) and all-aluminium (all-Al) KIDs. The noise is found to be independent of the level of the radiation power. The noise equivalent power (NEP) improves with higher radiation powers, also opposite to what is observed and well understood for hybrid NbTiN/Al and all-Al KIDs. We suggest that an inhomogeneous state of these disordered superconductors should be used to explain these observations.
△ Less
Submitted 20 August, 2014; v1 submitted 1 August, 2014;
originally announced August 2014.
-
High optical efficiency and photon noise limited sensitivity of microwave kinetic inductance detectors using phase readout
Authors:
R. M. J. Janssen,
J. J. A. Baselmans,
A. Endo,
L. Ferrari,
S. J. C. Yates,
A. M. Baryshev,
T. M. Klapwijk
Abstract:
We demonstrate photon noise limited performance in both phase and amplitude readout in microwave kinetic inductance detectors (MKIDs) consisting of NbTiN and Al, down to 100 fW of optical power. We simulate the far field beam pattern of the lens-antenna system used to couple radiation into the MKID and derive an aperture efficiency of 75%. This is close to the theoretical maximum of 80% for a sing…
▽ More
We demonstrate photon noise limited performance in both phase and amplitude readout in microwave kinetic inductance detectors (MKIDs) consisting of NbTiN and Al, down to 100 fW of optical power. We simulate the far field beam pattern of the lens-antenna system used to couple radiation into the MKID and derive an aperture efficiency of 75%. This is close to the theoretical maximum of 80% for a single-moded detector. The beam patterns are verified by a detailed analysis of the optical coupling within our measurement setup.
△ Less
Submitted 11 November, 2013;
originally announced November 2013.
-
Evidence of a nonequilibrium distribution of quasiparticles in the microwave response of a superconducting aluminium resonator
Authors:
P. J. de Visser,
D. J. Goldie,
P. Diener,
S. Withington,
J. J. A. Baselmans,
T. M. Klapwijk
Abstract:
In a superconductor absorption of photons with an energy below the superconducting gap leads to redistribution of quasiparticles over energy and thus induces a strong non-equilibrium quasiparticle energy distribution. We have measured the electrodynamic response, quality factor and resonant frequency, of a superconducting aluminium microwave resonator as a function of microwave power and temperatu…
▽ More
In a superconductor absorption of photons with an energy below the superconducting gap leads to redistribution of quasiparticles over energy and thus induces a strong non-equilibrium quasiparticle energy distribution. We have measured the electrodynamic response, quality factor and resonant frequency, of a superconducting aluminium microwave resonator as a function of microwave power and temperature. Below 200 mK, both the quality factor and resonant frequency decrease with increasing microwave power, consistent with the creation of excess quasiparticles due to microwave absorption. Counterintuitively, above 200 mK, the quality factor and resonant frequency increase with increasing power. We demonstrate that the effect can only be understood by a non-thermal quasiparticle distribution.
△ Less
Submitted 9 January, 2014; v1 submitted 20 June, 2013;
originally announced June 2013.
-
Fluctuations in the electron system of a superconductor exposed to a photon flux
Authors:
P. J. de Visser,
J. J. A. Baselmans,
J. Bueno,
N. Llombart,
T. M. Klapwijk
Abstract:
We report on fluctuations in the electron system, Cooper pairs and quasiparticles, of a superconducting aluminium film. The superconductor is exposed to pair-breaking photons (1.54 THz), which are coupled through an antenna. The change in the complex conductivity of the superconductor upon a change in the quasiparticle number is read out by a microwave resonator. A large range in radiation power c…
▽ More
We report on fluctuations in the electron system, Cooper pairs and quasiparticles, of a superconducting aluminium film. The superconductor is exposed to pair-breaking photons (1.54 THz), which are coupled through an antenna. The change in the complex conductivity of the superconductor upon a change in the quasiparticle number is read out by a microwave resonator. A large range in radiation power can be chosen by carefully filtering the radiation from a blackbody source. We identify two regimes. At high radiation power, fluctuations in the electron system caused by the random arrival rate of the photons are resolved, giving a straightforward measure of the optical efficiency (48%). At low radiation power fluctuations are dominated by excess quasiparticles, the number of which is measured through their recombination lifetime.
△ Less
Submitted 18 June, 2013;
originally announced June 2013.
-
On-chip filter bank spectroscopy at 600-700 GHz using NbTiN superconducting resonators
Authors:
A. Endo,
C. Sfiligoj,
S. J. C. Yates,
J. J. A. Baselmans,
D. J. Thoen,
S. M. H. Javadzadeh,
P. P. van der Werf,
A. M. Baryshev,
T. M. Klapwijk
Abstract:
We experimentally demonstrate the principle of an on-chip submillimeter wave filter bank spectrometer, using superconducting microresonators as narrow band-separation filters. The filters are made of NbTiN/SiNx/NbTiN microstrip line resonators, which have a resonance frequency in the range of 614-685 GHz---two orders of magnitude higher in frequency than what is currently studied for use in circui…
▽ More
We experimentally demonstrate the principle of an on-chip submillimeter wave filter bank spectrometer, using superconducting microresonators as narrow band-separation filters. The filters are made of NbTiN/SiNx/NbTiN microstrip line resonators, which have a resonance frequency in the range of 614-685 GHz---two orders of magnitude higher in frequency than what is currently studied for use in circuit quantum electrodynamics and photodetectors. The frequency resolution of the filters decreases from 350 to 140 with increasing frequency, most likely limited by dissipation of the resonators.
△ Less
Submitted 21 June, 2013; v1 submitted 28 March, 2013;
originally announced March 2013.
-
Microwave properties of superconducting atomic-layer deposited TiN films
Authors:
P. C. J. J. Coumou,
M. R. Zuiddam,
E. F. C. Driessen,
P. J. de Visser,
J. J. A. Baselmans,
T. M. Klapwijk
Abstract:
We have grown superconducting TiN films by atomic layer deposition with thicknesses ranging from 6 to 89 nm. This deposition method allows us to tune the resistivity and critical temperature by controlling the film thickness. The microwave properties are measured, using a coplanar-waveguide resonator, and we find internal quality factors above a million, high sheet inductances (5.2-620 pH), and pu…
▽ More
We have grown superconducting TiN films by atomic layer deposition with thicknesses ranging from 6 to 89 nm. This deposition method allows us to tune the resistivity and critical temperature by controlling the film thickness. The microwave properties are measured, using a coplanar-waveguide resonator, and we find internal quality factors above a million, high sheet inductances (5.2-620 pH), and pulse response times up to 100 μs. The high normal state resistivity of the films (> 100 μΩcm) affects the superconducting state and thereby the electrodynamic response. The microwave response is modeled using a quasiparticle density of states modified with an effective pair-breaker,consistently describing the measured temperature dependence of the quality factor and the resonant frequency.
△ Less
Submitted 18 December, 2012;
originally announced December 2012.
-
Homogeneous superconducting phase in TiN film : a complex impedance study
Authors:
P. Diener,
H. Schellevis,
J. J. A. Baselmans
Abstract:
The low frequency complex impedance of a high resistivity 92 μΩ cm and 100 nm thick TiN superconducting film has been measured via the transmission of several high sensitivity GHz microresonators, down to Tc/50. The temperature dependence of the kinetic inductance follows closely BCS local electrodynamics, with one well defined superconducting gap. This evidences the recovery of an homogeneous sup…
▽ More
The low frequency complex impedance of a high resistivity 92 μΩ cm and 100 nm thick TiN superconducting film has been measured via the transmission of several high sensitivity GHz microresonators, down to Tc/50. The temperature dependence of the kinetic inductance follows closely BCS local electrodynamics, with one well defined superconducting gap. This evidences the recovery of an homogeneous superconducting phase in TiN far from the disorder and composition driven transitions. Additionally, we observe a linearity between resonator quality factor and frequency temperature changes, which can be described by a two fluid model.
△ Less
Submitted 6 December, 2012; v1 submitted 28 November, 2012;
originally announced November 2012.
-
Power Handling and Responsivity of Submicron Wide Superconducting Coplanar Waveguide Resonators
Authors:
R. M. J. Janssen,
A. Endo,
J. J. A. Baselmans,
P. J. de Visser,
R. Barends,
T. M. Klapwijk
Abstract:
The sensitivity of microwave kinetic inductance detectors (MKIDs) based on coplanar waveguides (CPWs) needs to be improved by at least an order of magnitude to satisfy the requirements for space-based terahertz astronomy. Our aim is to investigate if this can be achieved by reducing the width of the CPW to much below what has typically been made using optical lithography (> 1 μm). CPW resonators w…
▽ More
The sensitivity of microwave kinetic inductance detectors (MKIDs) based on coplanar waveguides (CPWs) needs to be improved by at least an order of magnitude to satisfy the requirements for space-based terahertz astronomy. Our aim is to investigate if this can be achieved by reducing the width of the CPW to much below what has typically been made using optical lithography (> 1 μm). CPW resonators with a central line width as narrow as 300 nm were made in NbTiN using electron beam lithography and reactive ion etching. In a systematic study of quarter-wave CPW resonators with varying widths it is shown that the behavior of responsivity, noise and power handling as a function of width continues down to 300 nm. This encourages the development of narrow KIDs using Al in order to improve their sensitivity.
△ Less
Submitted 4 June, 2012;
originally announced June 2012.
-
Microwave-induced excess quasiparticles in superconducting resonators measured through correlated conductivity fluctuations
Authors:
P. J. de Visser,
J. J. A. Baselmans,
S. J. C. Yates,
P. Diener,
A. Endo,
T. M. Klapwijk
Abstract:
We have measured the number of quasiparticles and their lifetime in aluminium superconducting microwave resonators. The number of excess quasiparticles below 160 mK decreases from 72 to 17 $μ$m$^{-3}$ with a 6 dB decrease of the microwave power. The quasiparticle lifetime increases accordingly from 1.4 to 3.5 ms. These properties of the superconductor were measured through the spectrum of correlat…
▽ More
We have measured the number of quasiparticles and their lifetime in aluminium superconducting microwave resonators. The number of excess quasiparticles below 160 mK decreases from 72 to 17 $μ$m$^{-3}$ with a 6 dB decrease of the microwave power. The quasiparticle lifetime increases accordingly from 1.4 to 3.5 ms. These properties of the superconductor were measured through the spectrum of correlated fluctuations in the quasiparticle system and condensate of the superconductor, which show up in the resonator amplitude and phase respectively. Because uncorrelated noise sources vanish, fluctuations in the superconductor can be studied with a sensitivity close to the vacuum noise.
△ Less
Submitted 28 March, 2012; v1 submitted 3 February, 2012;
originally announced February 2012.
-
Integrated Filterbank for DESHIMA: A Submillimeter Imaging Spectrograph Based on Superconducting Resonators
Authors:
A. Endo,
P. van der Werf,
R. M. J. Janssen,
P. J. de Visser,
T. M. Klapwijk,
J. J. A. Baselmans,
L. Ferrari,
A. M. Baryshev,
S. J. C. Yates
Abstract:
An integrated filterbank (IFB) in combination with microwave kinetic inductance detectors (MKIDs), both based on superconducting resonators, could be used to make broadband submillimeter imaging spectrographs that are compact and flexible. In order to investigate the possibility of adopting an IFB configuration for DESHIMA (Delft SRON High-redshift Mapper), we study the basic properties of a copla…
▽ More
An integrated filterbank (IFB) in combination with microwave kinetic inductance detectors (MKIDs), both based on superconducting resonators, could be used to make broadband submillimeter imaging spectrographs that are compact and flexible. In order to investigate the possibility of adopting an IFB configuration for DESHIMA (Delft SRON High-redshift Mapper), we study the basic properties of a coplanar-waveguide-based IFB using electromagnetic simulation. We show that a coupling efficiency greater than 1/2 can be achieved if transmission losses are negligible. We arrive at a practical design for a 9 pixel x 920 color 3 dimensional imaging device that fits on a 4 inch wafer, which instantaneously covers multiple submillimeter telluric windows with a dispersion of f/df = 1000.
△ Less
Submitted 17 July, 2011;
originally announced July 2011.
-
Loss and decoherence due to stray infrared light in superconducting quantum circuits
Authors:
R. Barends,
J. Wenner,
M. Lenander,
Y. Chen,
R. C. Bialczak,
J. Kelly,
E. Lucero,
P. O'Malley,
M. Mariantoni,
D. Sank,
H. Wang,
T. C. White,
Y. Yin,
J. Zhao,
A. N. Cleland,
John M. Martinis,
J. J. A. Baselmans
Abstract:
We find that stray infrared light from the 4 K stage in a cryostat can cause significant loss in superconducting resonators and qubits. For devices shielded in only a metal box, we measured resonators with quality factors Q = 10^5 and qubits with energy relaxation times T_1=120 ns, consistent with a stray light-induced quasiparticle density of 170-230 μm^{-3}. By adding a second black shield at th…
▽ More
We find that stray infrared light from the 4 K stage in a cryostat can cause significant loss in superconducting resonators and qubits. For devices shielded in only a metal box, we measured resonators with quality factors Q = 10^5 and qubits with energy relaxation times T_1=120 ns, consistent with a stray light-induced quasiparticle density of 170-230 μm^{-3}. By adding a second black shield at the sample temperature, we found about an order of magnitude improvement in performance and no sensitivity to the 4 K radiation. We also tested various shielding methods, implying a lower limit of Q = 10^8 due to stray light in the light-tight configuration.
△ Less
Submitted 23 May, 2011;
originally announced May 2011.
-
Number fluctuations of sparse quasiparticles in a superconductor
Authors:
P. J. de Visser,
J. J. A. Baselmans,
P. Diener,
S. J. C. Yates,
A. Endo,
T. M. Klapwijk
Abstract:
We have directly measured quasiparticle number fluctuations in a thin film superconducting Al resonator in thermal equilibrium. The spectrum of these fluctuations provides a measure of both the density and the lifetime of the quasiparticles. We observe that the quasiparticle density decreases exponentially with decreasing temperature, as theoretically predicted, but saturates below 160 mK to 25-55…
▽ More
We have directly measured quasiparticle number fluctuations in a thin film superconducting Al resonator in thermal equilibrium. The spectrum of these fluctuations provides a measure of both the density and the lifetime of the quasiparticles. We observe that the quasiparticle density decreases exponentially with decreasing temperature, as theoretically predicted, but saturates below 160 mK to 25-55 per cubic micron. We show that this saturation is consistent with the measured saturation in the quasiparticle lifetime, which also explains similar observations in qubit decoherence times.
△ Less
Submitted 25 March, 2011; v1 submitted 3 March, 2011;
originally announced March 2011.
-
Reduced frequency noise in superconducting resonators
Authors:
R. Barends,
N. Vercruyssen,
A. Endo,
P. J. de Visser,
T. Zijlstra,
T. M. Klapwijk,
J. J. A. Baselmans
Abstract:
We report a reduction of the frequency noise in coplanar waveguide superconducting resonators. The reduction of 7 dB is achieved by removing the exposed dielectric substrate surface from the region with high electric fields and by using NbTiN. In a model-analysis the surface of NbTiN is found to be a negligible source of noise, experimentally supported by a comparison with NbTiN on SiOx resonators…
▽ More
We report a reduction of the frequency noise in coplanar waveguide superconducting resonators. The reduction of 7 dB is achieved by removing the exposed dielectric substrate surface from the region with high electric fields and by using NbTiN. In a model-analysis the surface of NbTiN is found to be a negligible source of noise, experimentally supported by a comparison with NbTiN on SiOx resonators. The reduction is additive to decreasing the noise by widening the resonators.
△ Less
Submitted 28 May, 2010;
originally announced May 2010.
-
Minimal resonator loss for circuit quantum electrodynamics
Authors:
R. Barends,
N. Vercruyssen,
A. Endo,
P. J. de Visser,
T. Zijlstra,
T. M. Klapwijk,
P. Diener,
S. J. C. Yates,
J. J. A. Baselmans
Abstract:
Single photon level quality factors of 500x10^3 are shown in NbTiN superconducting resonators at millikelvin temperatures. This result originates from the intrinsic low dielectric loss of NbTiN, as demonstrated by comparison with Ta, and by removing unnecessary parts of the dielectric substrate.
Single photon level quality factors of 500x10^3 are shown in NbTiN superconducting resonators at millikelvin temperatures. This result originates from the intrinsic low dielectric loss of NbTiN, as demonstrated by comparison with Ta, and by removing unnecessary parts of the dielectric substrate.
△ Less
Submitted 3 May, 2010;
originally announced May 2010.
-
FFTS readout for large arrays of Microwave Kinetic Inductance Detectors
Authors:
S. J. C. Yates,
A. M. Baryshev,
J. J. A. Baselmans,
B. Klein,
R. Güsten
Abstract:
Microwave Kinetic Inductance Detectors (MKIDs) have great potential for large very sensitive detector arrays for use in, for example, sub-mm imaging. Being intrinsically readout in the frequency domain, they are particularly suited for frequency domain multiplexing allowing $\sim$1000s of devices to be readout with one pair of coaxial cables. However, this moves the complexity of the detector fr…
▽ More
Microwave Kinetic Inductance Detectors (MKIDs) have great potential for large very sensitive detector arrays for use in, for example, sub-mm imaging. Being intrinsically readout in the frequency domain, they are particularly suited for frequency domain multiplexing allowing $\sim$1000s of devices to be readout with one pair of coaxial cables. However, this moves the complexity of the detector from the cryogenics to the warm electronics. We present here the concept and experimental demonstration of the use of Fast Fourier Transform Spectrometer (FFTS) readout, showing no deterioration of the noise performance compared to low noise analog mixing while allowing high multiplexing ratios.
△ Less
Submitted 13 March, 2009;
originally announced March 2009.
-
Enhancement of quasiparticle recombination in Ta and Al superconductors by implantation of magnetic and nonmagnetic atoms
Authors:
R. Barends,
S. van Vliet,
J. J. A. Baselmans,
S. J. C. Yates,
J. R. Gao,
T. M. Klapwijk
Abstract:
The quasiparticle recombination time in superconducting films, consisting of the standard electron-phonon interaction and a yet to be identified low temperature process, is studied for different densities of magnetic and nonmagnetic atoms. For both Ta and Al, implanted with Mn, Ta and Al, we observe an increase of the recombination rate. We conclude that the enhancement of recombination is not d…
▽ More
The quasiparticle recombination time in superconducting films, consisting of the standard electron-phonon interaction and a yet to be identified low temperature process, is studied for different densities of magnetic and nonmagnetic atoms. For both Ta and Al, implanted with Mn, Ta and Al, we observe an increase of the recombination rate. We conclude that the enhancement of recombination is not due to the magnetic moment, but arises from an enhancement of disorder.
△ Less
Submitted 12 November, 2008;
originally announced November 2008.
-
Contribution of dielectrics to frequency and noise of NbTiN superconducting resonators
Authors:
R. Barends,
H. L. Hortensius,
T. Zijlstra,
J. J. A. Baselmans,
S. J. C. Yates,
J. R. Gao,
T. M. Klapwijk
Abstract:
We study NbTiN resonators by measurements of the temperature dependent resonance frequency and frequency noise. Additionally, resonators are studied covered with SiOx dielectric layers of various thicknesses. The resonance frequency develops a non-monotonic temperature dependence with increasing SiOx layer thickness. The increase in the noise is independent of the SiOx thickness, demonstrating t…
▽ More
We study NbTiN resonators by measurements of the temperature dependent resonance frequency and frequency noise. Additionally, resonators are studied covered with SiOx dielectric layers of various thicknesses. The resonance frequency develops a non-monotonic temperature dependence with increasing SiOx layer thickness. The increase in the noise is independent of the SiOx thickness, demonstrating that the noise is not dominantly related to the low temperature resonance frequency deviations.
△ Less
Submitted 17 May, 2008; v1 submitted 22 April, 2008;
originally announced April 2008.
-
Quasiparticle relaxation in optically excited high-Q superconducting resonators
Authors:
R. Barends,
J. J. A. Baselmans,
S. J. C. Yates,
J. R. Gao,
J. N. Hovenier,
T. M. Klapwijk
Abstract:
The quasiparticle relaxation time in superconducting films has been measured as a function of temperature using the response of the complex conductivity to photon flux. For tantalum and aluminium, chosen for their difference in electron-phonon coupling strength, we find that at high temperatures the relaxation time increases with decreasing temperature, as expected for electron-phonon interactio…
▽ More
The quasiparticle relaxation time in superconducting films has been measured as a function of temperature using the response of the complex conductivity to photon flux. For tantalum and aluminium, chosen for their difference in electron-phonon coupling strength, we find that at high temperatures the relaxation time increases with decreasing temperature, as expected for electron-phonon interaction. At low temperatures we find in both superconducting materials a saturation of the relaxation time, suggesting the presence of a second relaxation channel not due to electron-phonon interaction.
△ Less
Submitted 5 June, 2008; v1 submitted 5 February, 2008;
originally announced February 2008.
-
Electrical detection of spin accumulation and spin precession at room temperature in metallic spin valves
Authors:
F. J. Jedema,
M. V. Costache,
H. B. Heersche,
J. J. A. Baselmans,
B. J. van Wees
Abstract:
We have fabricated a multi terminal lateral mesoscopic metallic spin valve demonstrating spin precession at room temperature, using tunnel barriers in combination with metallic ferromagnetic electrodes as spin injector and detector. The observed modulation of the output signal due to the spin precession is discussed and explained in terms of a time of flight experiment of electrons in a diffusiv…
▽ More
We have fabricated a multi terminal lateral mesoscopic metallic spin valve demonstrating spin precession at room temperature, using tunnel barriers in combination with metallic ferromagnetic electrodes as spin injector and detector. The observed modulation of the output signal due to the spin precession is discussed and explained in terms of a time of flight experiment of electrons in a diffusive conductor. The obtained spin relaxation length lambda_{sf}=500 nm in an Al strip will make possible detailed studies of spin dependent transport phenomena and allow to explore the possibilities of the electron spin for new electronic applications at RT.
△ Less
Submitted 29 July, 2002;
originally announced July 2002.
-
Direct demonstration of circulating currents in a controllable $π$-SQUID generated by a 0 to $π$ transition of the weak links
Authors:
J. J. A. Baselmans,
B. J. van Wees,
T. M. Klapwijk
Abstract:
A controllable $π$-SQUID is a DC SQUID with two controllable $π$-junctions as weak links. A controllable $π$-junction consists of a superconducting - normal metal - superconducting Josephson junction with two additional contacts to the normal region of the junction. By applying a voltage $V_c$ over these contacts it is possible to control the sate of the junction, i.e. a conventional (0) state o…
▽ More
A controllable $π$-SQUID is a DC SQUID with two controllable $π$-junctions as weak links. A controllable $π$-junction consists of a superconducting - normal metal - superconducting Josephson junction with two additional contacts to the normal region of the junction. By applying a voltage $V_c$ over these contacts it is possible to control the sate of the junction, i.e. a conventional (0) state or a $π$-state, depending on the magnitude of $V_c$. We demonstrate experimentally that, by putting one junction into a $π$-state, a screening current is generated around the SQUID loop at integer external flux. To be able to do this, we have fabricated controllable $π$-junctions, based on Cu-Nb or Ag-Nb, in a new geometry. We show that at 1.4 K only the Nb-Ag device shows the transition to a $π$-state as a function of $V_c$ consistent with theoretical predictions. In a controllable $π$ SQUID based on Nb-Ag we observe, a part from a screening current at integer external flux, a phase shift of $π$ of the $V_{SQUID}-B$ oscillations under suitable current bias, depending on the magnitude of $V_c$.
△ Less
Submitted 21 March, 2002;
originally announced March 2002.
-
The controllable pi - SQUID
Authors:
J. J. A. Baselmans,
B. J. van Wees,
T. M. Klapwijk
Abstract:
We have fabricated and studied a new kind of DC SQUID in which the magnitude and sign of the critical current of the individual Josephson junctions can be controlled by additional voltage probes connected to the junctions. We show that the amplitude of the voltage oscillations of the SQUID as a function of the applied magnetic field can be tuned and that the phase of the oscillations can be swit…
▽ More
We have fabricated and studied a new kind of DC SQUID in which the magnitude and sign of the critical current of the individual Josephson junctions can be controlled by additional voltage probes connected to the junctions. We show that the amplitude of the voltage oscillations of the SQUID as a function of the applied magnetic field can be tuned and that the phase of the oscillations can be switched between 0 and $π$ in the temperature range of 0.1 - 4.2 K using a suitable control voltage. This is equivalent to the external application of (n+1/2) flux quantum.
△ Less
Submitted 13 July, 2001;
originally announced July 2001.
-
Probing the electron-electron interaction in a diffusive gold wire using a controllable Josephson junction
Authors:
J. J. A. Baselmans,
B. J. van Wees,
T. M. Klapwijk
Abstract:
We have studied the critical current of a diffusive superconductor - normal metal - superconductor (SNS) Josephson junction as a function of the electron energy distribution in the normal region. This was realized in a 4 terminal device, in which a mesoscopic gold wire between two electron reservoirs is coupled in its center to two superconducting electrodes. By varying the length of the wire an…
▽ More
We have studied the critical current of a diffusive superconductor - normal metal - superconductor (SNS) Josephson junction as a function of the electron energy distribution in the normal region. This was realized in a 4 terminal device, in which a mesoscopic gold wire between two electron reservoirs is coupled in its center to two superconducting electrodes. By varying the length of the wire and applying a voltage over it we are able to control the electron distribution function in the center of the wire, which forms the normal region of the SNS junction. The observed voltage and temperature dependence are in good agreement with the existing theory on diffusive SNS junctions, except for low energies. However, an electron-electron interaction time $τ_0$ =10 ps was found, which is three orders of magnitude faster than expected from theory.
△ Less
Submitted 9 July, 1999;
originally announced July 1999.
