-
Emergent macroscopic bistability induced by a single superconducting qubit
Authors:
R. Sett,
F. Hassani,
D. Phan,
S. Barzanjeh,
A. Vukics,
J. M. Fink
Abstract:
The photon blockade breakdown in a continuously driven cavity QED system has been proposed as a prime example for a first-order driven-dissipative quantum phase transition. But the predicted scaling from a microscopic system - dominated by quantum fluctuations - to a macroscopic one - characterized by stable phases - and the associated exponents and phase diagram have not been observed so far. In…
▽ More
The photon blockade breakdown in a continuously driven cavity QED system has been proposed as a prime example for a first-order driven-dissipative quantum phase transition. But the predicted scaling from a microscopic system - dominated by quantum fluctuations - to a macroscopic one - characterized by stable phases - and the associated exponents and phase diagram have not been observed so far. In this work we couple a single transmon qubit with a fixed coupling strength $g$ to an in-situ bandwidth $κ$ tuneable superconducting cavity to controllably approach this thermodynamic limit. Even though the system remains microscopic, we observe its behavior to become more and more macroscopic as a function of $g/κ$. For the highest realized $g/κ\approx 287$ the system switches with a characteristic dwell time as high as 6 seconds between a bright coherent state with $\approx 8 \times 10^3$ intra-cavity photons and the vacuum state with equal probability. This exceeds the microscopic time scales by six orders of magnitude and approaches the near perfect hysteresis expected between two macroscopic attractors in the thermodynamic limit. These findings and interpretation are qualitatively supported by semi-classical theory and large-scale Quantum-Jump Monte Carlo simulations. Besides shedding more light on driven-dissipative physics in the limit of strong light-matter coupling, this system might also find applications in quantum sensing and metrology.
△ Less
Submitted 25 October, 2022;
originally announced October 2022.
-
Compact vacuum gap transmon qubits: Selective and sensitive probes for superconductor surface losses
Authors:
M. Zemlicka,
E. Redchenko,
M. Peruzzo,
F. Hassani,
A. Trioni,
S. Barzanjeh,
J. M. Fink
Abstract:
State-of-the-art transmon qubits rely on large capacitors which systematically improves their coherence due to reduced surface loss participation. However, this approach increases both the footprint and the parasitic cross-coupling and is ultimately limited by radiation losses - a potential roadblock for scaling up quantum processors to millions of qubits. In this work we present transmon qubits w…
▽ More
State-of-the-art transmon qubits rely on large capacitors which systematically improves their coherence due to reduced surface loss participation. However, this approach increases both the footprint and the parasitic cross-coupling and is ultimately limited by radiation losses - a potential roadblock for scaling up quantum processors to millions of qubits. In this work we present transmon qubits with sizes as low as 36$ \times $39$ μ$m$^2$ with $\gtrsim$100 nm wide vacuum gap capacitors that are micro-machined from commercial silicon-on-insulator wafers and shadow evaporated with aluminum. After the release in HF vapor we achieve a vacuum participation ratio up to 99.6\% in an in-plane design that is compatible with standard coplanar circuits. Qubit relaxation time measurements for small gaps with high vacuum electric fields of up to 22 V/m reveal a double exponential decay indicating comparably strong coupling to long-lived two-level-systems (TLS). The exceptionally high selectivity of $>$20 dB to the superconductor-vacuum surface allows to precisely back out the sub-single-photon dielectric loss tangent of aluminum oxide exposed to ambient conditions. In terms of future scaling potential we achieve a qubit quality factor by footprint area of $20 μ\mathrm{s}^{-2}$, which is on par with the highest $T_1$ devices relying on larger geometries and expected to improve substantially for lower loss superconductors like NbTiN, TiN or Ta.
△ Less
Submitted 11 July, 2022; v1 submitted 28 June, 2022;
originally announced June 2022.
-
Converting microwave and telecom photons with a silicon photonic nanomechanical interface
Authors:
G. Arnold,
M. Wulf,
S. Barzanjeh,
E. S. Redchenko,
A. Rueda,
W. J. Hease,
F. Hassani,
J. M. Fink
Abstract:
Practical quantum networks require low-loss and noise-resilient optical interconnects as well as non-Gaussian resources for entanglement distillation and distributed quantum computation. The latter could be provided by superconducting circuits but - despite growing efforts and rapid progress - existing solutions to interface the microwave and optical domains lack either scalability or efficiency,…
▽ More
Practical quantum networks require low-loss and noise-resilient optical interconnects as well as non-Gaussian resources for entanglement distillation and distributed quantum computation. The latter could be provided by superconducting circuits but - despite growing efforts and rapid progress - existing solutions to interface the microwave and optical domains lack either scalability or efficiency, and in most cases the conversion noise is not known. In this work we utilize the unique opportunities of silicon photonics, cavity optomechanics and superconducting circuits to demonstrate a fully integrated, coherent transducer connecting the microwave X and the telecom S bands with a total (internal) bidirectional transduction efficiency of 1.2% (135 %) at millikelvin temperatures. The coupling relies solely on the radiation pressure interaction mediated by the femtometer-scale motion of two silicon nanobeams and includes an optomechanical gain of about 20 dB. The chip-scale device is fabricated from CMOS compatible materials and achieves a V$_π$ as low as 16 $μ$V for sub-nanowatt pump powers. Such power-efficient, ultra-sensitive and highly integrated hybrid interconnects might find applications ranging from quantum communication and RF receivers to magnetic resonance imaging.
△ Less
Submitted 26 February, 2020;
originally announced February 2020.
-
Microwave quantum illumination using a digital receiver
Authors:
S. Barzanjeh,
S. Pirandola,
D. Vitali,
J. M. Fink
Abstract:
Quantum illumination is a powerful sensing technique that employs entangled signal-idler photon pairs to boost the detection efficiency of low-reflectivity objects in environments with bright thermal noise. The promised advantage over classical strategies is particularly evident at low signal powers, a feature which could make the protocol an ideal prototype for non-invasive biomedical scanning or…
▽ More
Quantum illumination is a powerful sensing technique that employs entangled signal-idler photon pairs to boost the detection efficiency of low-reflectivity objects in environments with bright thermal noise. The promised advantage over classical strategies is particularly evident at low signal powers, a feature which could make the protocol an ideal prototype for non-invasive biomedical scanning or low-power short-range radar. In this work we experimentally investigate the concept of quantum illumination at microwave frequencies. We generate entangled fields using a Josephson parametric converter to illuminate a room-temperature object at a distance of 1 meter in a free-space detection setup. We implement a digital phase conjugate receiver based on linear quadrature measurements that outperforms a symmetric classical noise radar in the same conditions despite the entanglement-breaking signal path. Starting from experimental data, we also simulate the case of perfect idler photon number detection, which results in a quantum advantage compared to the relative classical benchmark. Our results highlight the opportunities and challenges on the way towards a first room-temperature application of microwave quantum circuits.
△ Less
Submitted 26 January, 2020; v1 submitted 8 August, 2019;
originally announced August 2019.
-
Tunable mechanical coupling between driven microelectromechanical resonators
Authors:
G. J. Verbiest,
D. Xu,
M. Goldsche,
T. Khodkov,
S. Barzanjeh,
N. von den Driesch,
D. Buca,
C. Stampfer
Abstract:
We present a microelectromechanical system, in which a silicon beam is attached to a comb-drive actuator, that is used to tune the tension in the silicon beam, and thus its resonance frequency. By measuring the resonance frequencies of the system, we show that the comb-drive actuator and the silicon beam behave as two strongly coupled resonators. Interestingly, the effective coupling rate (~ 1.5 M…
▽ More
We present a microelectromechanical system, in which a silicon beam is attached to a comb-drive actuator, that is used to tune the tension in the silicon beam, and thus its resonance frequency. By measuring the resonance frequencies of the system, we show that the comb-drive actuator and the silicon beam behave as two strongly coupled resonators. Interestingly, the effective coupling rate (~ 1.5 MHz) is tunable with the comb-drive actuator (+10%) as well as with a side-gate (-10%) placed close to the silicon beam. In contrast, the effective spring constant of the system is insensitive to either of them and changes only by $\pm$ 0.5%. Finally, we show that the comb-drive actuator can be used to switch between different coupling rates with a frequency of at least 10 kHz.
△ Less
Submitted 15 July, 2016;
originally announced July 2016.
-
Microwave Quantum Illumination
Authors:
Shabir Barzanjeh,
Saikat Guha,
Christian Weedbrook,
David Vitali,
Jeffrey H. Shapiro,
Stefano Pirandola
Abstract:
Quantum illumination is a quantum-optical sensing technique in which an entangled source is exploited to improve the detection of a low-reflectivity object that is immersed in a bright thermal background. Here we describe and analyze a system for applying this technique at microwave frequencies, a more appropriate spectral region for target detection than the optical, due to the naturally-occurrin…
▽ More
Quantum illumination is a quantum-optical sensing technique in which an entangled source is exploited to improve the detection of a low-reflectivity object that is immersed in a bright thermal background. Here we describe and analyze a system for applying this technique at microwave frequencies, a more appropriate spectral region for target detection than the optical, due to the naturally-occurring bright thermal background in the microwave regime. We use an electro-optomechanical converter to entangle microwave signal and optical idler fields, with the former being sent to probe the target region and the latter being retained at the source. The microwave radiation collected from the target region is then phase conjugated and upconverted into an optical field that is combined with the retained idler in a joint-detection quantum measurement. The error probability of this microwave quantum-illumination system, or quantum radar, is shown to be superior to that of any classical microwave radar of equal transmitted energy.
△ Less
Submitted 28 February, 2015;
originally announced March 2015.
-
Quantum Illumination at the Microwave Wavelengths
Authors:
Shabir Barzanjeh,
Saikat Guha,
Christian Weedbrook,
David Vitali,
Jeffrey H. Shapiro,
Stefano Pirandola
Abstract:
Quantum illumination is a quantum-optical sensing technique in which an entangled source is exploited to improve the detection of a low-reflectivity object that is immersed in a bright thermal background. Here we describe and analyze a system for applying this technique at microwave frequencies, a more appropriate spectral region for target detection than the optical, due to the naturally-occurrin…
▽ More
Quantum illumination is a quantum-optical sensing technique in which an entangled source is exploited to improve the detection of a low-reflectivity object that is immersed in a bright thermal background. Here we describe and analyze a system for applying this technique at microwave frequencies, a more appropriate spectral region for target detection than the optical, due to the naturally-occurring bright thermal background in the microwave regime. We use an electro-optomechanical converter to entangle microwave signal and optical idler fields, with the former being sent to probe the target region and the latter being retained at the source. The microwave radiation collected from the target region is then phase conjugated and upconverted into an optical field that is combined with the retained idler in a joint-detection quantum measurement. The error probability of this microwave quantum-illumination system, or quantum radar, is shown to be superior to that of any classical microwave radar of equal transmitted energy.
△ Less
Submitted 16 February, 2015; v1 submitted 15 October, 2014;
originally announced October 2014.
-
Nonlinear effects of atomic collisions on the optomechanical properties of a Bose-Einstein condensate in an optical cavity
Authors:
A. Dalafi,
M. H. Naderi,
M. Soltanolkotabi,
Sh. Barzanjeh
Abstract:
In this paper, we have investigated theoretically the influence of atomic collisions on the behaviour of a one-dimensional Bose-Einstein condensate inside a driven optical cavity. We develop the discrete-mode approximation for the condensate taking into account the interband transitions due to the s-wave scattering interaction. We show that in the Bogoliubov approximation the atom-atom interaction…
▽ More
In this paper, we have investigated theoretically the influence of atomic collisions on the behaviour of a one-dimensional Bose-Einstein condensate inside a driven optical cavity. We develop the discrete-mode approximation for the condensate taking into account the interband transitions due to the s-wave scattering interaction. We show that in the Bogoliubov approximation the atom-atom interaction shifts the energies of the excited modes and also plays the role of an optical parametric amplifier for the Bogoliubov side mode which can affect its normal-mode splitting behaviour. On the other hand due to the atomic collisions the resonance frequency of the cavity is shifted which leads to the decrease of the number of cavity photons and the depletion of the Bogoliubov mode. Besides, it reduces the effective atom-photon coupling parameter which consequently leads to the decrease of the entanglement between the Bogoliubov mode and the optical field.
△ Less
Submitted 12 November, 2012;
originally announced November 2012.
-
Reversible optical to microwave quantum interface
Authors:
Sh. Barzanjeh,
M. Abdi,
G. J. Milburn,
P. Tombesi,
D. Vitali
Abstract:
We describe a reversible quantum interface between an optical and a microwave field using a hybrid device based on their common interaction with a micro-mechanical resonator in a superconducting circuit. We show that, by employing state-of-the-art opto-electro-mechanical devices, one can realise an effective source of (bright) two-mode squeezing with an optical idler (signal) and a microwave signa…
▽ More
We describe a reversible quantum interface between an optical and a microwave field using a hybrid device based on their common interaction with a micro-mechanical resonator in a superconducting circuit. We show that, by employing state-of-the-art opto-electro-mechanical devices, one can realise an effective source of (bright) two-mode squeezing with an optical idler (signal) and a microwave signal, which can be used for high-fidelity transfer of quantum states between optical and microwave fields by means of continuous variable teleportation.
△ Less
Submitted 2 October, 2012; v1 submitted 27 October, 2011;
originally announced October 2011.
-
Effect of phase noise on the generation of stationary entanglement in cavity optomechanics
Authors:
M. Abdi,
Sh Barzanjeh,
P. Tombesi,
D. Vitali
Abstract:
We study the effect of laser phase noise on the generation of stationary entanglement between an intracavity optical mode and a mechanical resonator in a generic cavity optomechanical system. We show that one can realize robust stationary optomechanical entanglement even in the presence of non-negligible laser phase noise. We also show that the explicit form of the laser phase noise spectrum is re…
▽ More
We study the effect of laser phase noise on the generation of stationary entanglement between an intracavity optical mode and a mechanical resonator in a generic cavity optomechanical system. We show that one can realize robust stationary optomechanical entanglement even in the presence of non-negligible laser phase noise. We also show that the explicit form of the laser phase noise spectrum is relevant, and discuss its effect on both optomechanical entanglement and ground state cooling of the mechanical resonator.
△ Less
Submitted 31 May, 2011;
originally announced June 2011.
