-
Challenges on Optical Printing of Colloidal Nanoparticles
Authors:
Ianina L. Violi,
Luciana P. Martinez,
Mariano Barella,
Cecilia Zaza,
Lukás Chvátal,
Pavel Zemánek,
Marina V. Gutiérrez,
María Y. Paredes,
Alberto F. Scarpettini,
Jorge Olmos-Trigo,
Valeria R. Pais,
Iván Díaz Nóblega,
Emiliano Cortes,
Juan José Sáenz,
Andrea V. Bragas,
Julian Gargiulo,
Fernando D. Stefani
Abstract:
While colloidal chemistry provides ways to obtain a great variety of nanoparticles, with different shapes, sizes, material composition, and surface functions, their controlled deposition and combination on arbitrary positions of substrates remains a considerable challenge. Over the last ten years, optical printing arose as a versatile method to achieve this purpose for different kinds of nanoparti…
▽ More
While colloidal chemistry provides ways to obtain a great variety of nanoparticles, with different shapes, sizes, material composition, and surface functions, their controlled deposition and combination on arbitrary positions of substrates remains a considerable challenge. Over the last ten years, optical printing arose as a versatile method to achieve this purpose for different kinds of nanoparticles. In this article we review the state of the art of optical printing of single nanoparticles, and discuss its strengths, limitations, and future perspectives, by focusing on four main challenges: printing accuracy, resolution, selectivity, and nanoparticles photostability.
△ Less
Submitted 14 December, 2021;
originally announced December 2021.
-
Proton irradiation effects on metal-YBCO interfaces
Authors:
C. Acha,
G. A. Sanca,
M. Barella,
M. Alurralde,
F. Gomez Marlasca,
H. Huhtinen,
P. Paturi,
F. Golmar,
P. Levy
Abstract:
10 MeV proton-irradiation effects on a YBCO-based test structure were analyzed by measuring its current-voltage (IV) characteristics for different cumulated fluences. For fluences of up to $\sim$80$\cdot$10$^9$~p/cm$^2$ no changes in the electrical behavior of the device were observed, while for a fluence of $\sim$~300$\cdot$10$^9~$ p/cm$^2$ it becomes less conducting. A detailed analysis of the r…
▽ More
10 MeV proton-irradiation effects on a YBCO-based test structure were analyzed by measuring its current-voltage (IV) characteristics for different cumulated fluences. For fluences of up to $\sim$80$\cdot$10$^9$~p/cm$^2$ no changes in the electrical behavior of the device were observed, while for a fluence of $\sim$~300$\cdot$10$^9~$ p/cm$^2$ it becomes less conducting. A detailed analysis of the room temperature IV characteristics based on the $γ$ power exponent parameter [$γ=dLn(I)/dLn(V)$] allowed us to reveal the main conduction mechanisms as well as to establish the equivalent circuit model of the device. The changes produced in the electrical behavior, in accordance with Monte Carlo TRIM simulations, suggest that the main effect induced by protons is the displacement of oxygen atoms within the YBCO lattice, particularly from oxygen-rich to oxygen-poor areas, where they become trapped.
△ Less
Submitted 27 February, 2021;
originally announced March 2021.
-
YBCO-based non-volatile ReRAM tested in Low Earth Orbit
Authors:
C. Acha,
M. Barella,
G. A. Sanca,
F. Gomez Marlasca,
H. Huhtinen,
P. Paturi,
P. Levy,
F. Golmar
Abstract:
An YBCO-based test structure corresponding to the family of ReRAM devices associated with the valence change mechanism is presented. We have characterized its electrical response previous to its lift-off to a Low Earth Orbit (LEO) using standard electronics and also with the dedicated LabOSat-01 controller. Similar results were obtained in both cases. After about 200 days at LEO on board a small s…
▽ More
An YBCO-based test structure corresponding to the family of ReRAM devices associated with the valence change mechanism is presented. We have characterized its electrical response previous to its lift-off to a Low Earth Orbit (LEO) using standard electronics and also with the dedicated LabOSat-01 controller. Similar results were obtained in both cases. After about 200 days at LEO on board a small satellite, electrical tests started on the memory device using the LabOSat-01 controller. We discuss the results of the first 150 tests, performed along a 433-day time interval in space. The memory device remained operational despite the hostile conditions that involved launching, lift-off vibrations, permanent thermal cycling and exposure to ionizing radiation, with doses 3 orders of magnitude greater than the usual ones on Earth. The device showed resistive switching and IV characteristics similar to those measured on Earth, although with changes that follow a smooth drift in time. A detailed study of the electrical transport mechanisms, based on previous models that indicate the existence of various conducting mechanisms through the metal-YBCO interface showed that the observed drift can be associated with a local temperature drift at the LabOSat controller, with no clear evidence that allows determining changes in the underlying microscopic factors. These results show the reliability of complex-oxide non-volatile ReRAM-based devices in order to operate under all the hostile conditions encountered in space-borne applications.
△ Less
Submitted 26 June, 2020;
originally announced June 2020.
